mitchell skurnik - Page 6

A Guided Tour of Complexity

- by JoshReuben

I just re-read Complexity – A Guided Tour by Melanie Mitchell , protégé of Douglas Hofstadter ( author of “Gödel, Escher, Bach”) http://www.amazon.com/Complexity-Guided-Tour-Melanie-Mitchell/dp/0199798109/ref=sr_1_1?ie=UTF8&qid=1339744329&sr=8-1 here are some notes and links: Evolved from Cybernetics, General Systems Theory, Synergetics some interesting transdisciplinary fields to investigate: Chaos Theory - http://en.wikipedia.org/wiki/Chaos_theory – small differences in initial conditions (such as those due to rounding errors in numerical computation) yield widely diverging outcomes for chaotic systems, rendering long-term prediction impossible. System Dynamics / Cybernetics - http://en.wikipedia.org/wiki/System_Dynamics – study of how feedback changes system behavior Network Theory - http://en.wikipedia.org/wiki/Network_theory – leverage Graph Theory to analyze symmetric / asymmetric relations between discrete objects Algebraic Topology - http://en.wikipedia.org/wiki/Algebraic_topology – leverage abstract algebra to analyze topological spaces There are limits to deterministic systems & to computation. Chaos Theory definitely applies to training an ANN (artificial neural network) – different weights will emerge depending upon the random selection of the training set. In recursive Non-Linear systems http://en.wikipedia.org/wiki/Nonlinear_system – output is not directly inferable from input. E.g. a Logistic map: Xt+1 = R Xt(1-Xt) Different types of bifurcations, attractor states and oscillations may occur – e.g. a Lorenz Attractor http://en.wikipedia.org/wiki/Lorenz_system Feigenbaum Constants http://en.wikipedia.org/wiki/Feigenbaum_constants express ratios in a bifurcation diagram for a non-linear map – the convergent limit of R (the rate of period-doubling bifurcations) is 4.6692016 Maxwell’s Demon - http://en.wikipedia.org/wiki/Maxwell%27s_demon - the Second Law of Thermodynamics has only a statistical certainty – the universe (and thus information) tends towards entropy. While any computation can theoretically be done without expending energy, with finite memory, the act of erasing memory is permanent and increases entropy. Life & thought is a counter-example to the universe’s tendency towards entropy. Leo Szilard and later Claude Shannon came up with the Information Theory of Entropy - http://en.wikipedia.org/wiki/Entropy_(information_theory) whereby Shannon entropy quantifies the expected value of a message’s information in bits in order to determine channel capacity and leverage Coding Theory (compression analysis). Ludwig Boltzmann came up with Statistical Mechanics - http://en.wikipedia.org/wiki/Statistical_mechanics – whereby our Newtonian perception of continuous reality is a probabilistic and statistical aggregate of many discrete quantum microstates. This is relevant for Quantum Information Theory http://en.wikipedia.org/wiki/Quantum_information and the Physics of Information - http://en.wikipedia.org/wiki/Physical_information. Hilbert’s Problems http://en.wikipedia.org/wiki/Hilbert's_problems pondered whether mathematics is complete, consistent, and decidable (the Decision Problem – http://en.wikipedia.org/wiki/Entscheidungsproblem – is there always an algorithm that can determine whether a statement is true). Godel’s Incompleteness Theorems http://en.wikipedia.org/wiki/G%C3%B6del's_incompleteness_theorems proved that mathematics cannot be both complete and consistent (e.g. “This statement is not provable”). Turing through the use of Turing Machines (http://en.wikipedia.org/wiki/Turing_machine symbol processors that can prove mathematical statements) and Universal Turing Machines (http://en.wikipedia.org/wiki/Universal_Turing_machine Turing Machines that can emulate other any Turing Machine via accepting programs as well as data as input symbols) that computation is limited by demonstrating the Halting Problem http://en.wikipedia.org/wiki/Halting_problem (is is not possible to know when a program will complete – you cannot build an infinite loop detector). You may be used to thinking of 1 / 2 / 3 dimensional systems, but Fractal http://en.wikipedia.org/wiki/Fractal systems are defined by self-similarity & have non-integer Hausdorff Dimensions !!! http://en.wikipedia.org/wiki/List_of_fractals_by_Hausdorff_dimension – the fractal dimension quantifies the number of copies of a self similar object at each level of detail – eg Koch Snowflake - http://en.wikipedia.org/wiki/Koch_snowflake Definitions of complexity: size, Shannon entropy, Algorithmic Information Content (http://en.wikipedia.org/wiki/Algorithmic_information_theory - size of shortest program that can generate a description of an object) Logical depth (amount of info processed), thermodynamic depth (resources required). Complexity is statistical and fractal. John Von Neumann’s other machine was the Self-Reproducing Automaton http://en.wikipedia.org/wiki/Self-replicating_machine . Cellular Automata http://en.wikipedia.org/wiki/Cellular_automaton are alternative form of Universal Turing machine to traditional Von Neumann machines where grid cells are locally synchronized with their neighbors according to a rule. Conway’s Game of Life http://en.wikipedia.org/wiki/Conway's_Game_of_Life demonstrates various emergent constructs such as “Glider Guns” and “Spaceships”. Cellular Automatons are not practical because logical ops require a large number of cells – wasteful & inefficient. There are no compilers or general program languages available for Cellular Automatons (as far as I am aware). Random Boolean Networks http://en.wikipedia.org/wiki/Boolean_network are extensions of cellular automata where nodes are connected at random (not to spatial neighbors) and each node has its own rule –> they demonstrate the emergence of complex & self organized behavior. Stephen Wolfram’s (creator of Mathematica, so give him the benefit of the doubt) New Kind of Science http://en.wikipedia.org/wiki/A_New_Kind_of_Science proposes the universe may be a discrete Finite State Automata http://en.wikipedia.org/wiki/Finite-state_machine whereby reality emerges from simple rules. I am 2/3 through this book. It is feasible that the universe is quantum discrete at the plank scale and that it computes itself – Digital Physics: http://en.wikipedia.org/wiki/Digital_physics – a simulated reality? Anyway, all behavior is supposedly derived from simple algorithmic rules & falls into 4 patterns: uniform , nested / cyclical, random (Rule 30 http://en.wikipedia.org/wiki/Rule_30) & mixed (Rule 110 - http://en.wikipedia.org/wiki/Rule_110 localized structures – it is this that is interesting). interaction between colliding propagating signal inputs is then information processing. Wolfram proposes the Principle of Computational Equivalence - http://mathworld.wolfram.com/PrincipleofComputationalEquivalence.html - all processes that are not obviously simple can be viewed as computations of equivalent sophistication. Meaning in information may emerge from analogy & conceptual slippages – see the CopyCat program: http://cognitrn.psych.indiana.edu/rgoldsto/courses/concepts/copycat.pdf Scale Free Networks http://en.wikipedia.org/wiki/Scale-free_network have a distribution governed by a Power Law (http://en.wikipedia.org/wiki/Power_law - much more common than Normal Distribution). They are characterized by hubs (resilience to random deletion of nodes), heterogeneity of degree values, self similarity, & small world structure. They grow via preferential attachment http://en.wikipedia.org/wiki/Preferential_attachment – tipping points triggered by positive feedback loops. 2 theories of cascading system failures in complex systems are Self-Organized Criticality http://en.wikipedia.org/wiki/Self-organized_criticality and Highly Optimized Tolerance http://en.wikipedia.org/wiki/Highly_optimized_tolerance. Computational Mechanics http://en.wikipedia.org/wiki/Computational_mechanics – use of computational methods to study phenomena governed by the principles of mechanics. This book is a great intuition pump, but does not cover the more mathematical subject of Computational Complexity Theory – http://en.wikipedia.org/wiki/Computational_complexity_theory I am currently reading this book on this subject: http://www.amazon.com/Computational-Complexity-Christos-H-Papadimitriou/dp/0201530821/ref=pd_sim_b_1 stay tuned for that review!

Read the article

Step Aside Google

- by David Dorf

Step aside Google. While search will always be a huge part of the web, I can see a day in the not-too-distance future where search takes a backseat to the social graph. Links between pages will give way to relationships between people, including context like location. What does this mean for retail? It means your e-commerce strategy will slowly transition to an f-commerce strategy. Remember when a large portion of the online population was held captive inside the walls of AOL? All the commercials listed an AOL keyword, not a web address because that's where the majority of people surfed. Now, people are spending a huge amount of time in Facebook (despite Betty White's proclamation that its a big waste of time). According to Facebook, users spend 500 billion minutes per month on the site. Selling products where consumers are spending their time makes sense. The power of Like and Share are the most effective approach to marketing. More and more stores are popping up on Facebook, and soon they will be the front-end to e-commerce systems. As sites adopt the Facebook Open Graph API, users will have a harder time distinguishing the open web from their Facebook experience, including shopping. Of course e-commerce sites won't go away, but a large portion of their traffic will emanate from Facebook and in some cases Facebook will act as the front-end for the web store. Ignore Facebook Open Graph at your peril. In a Mashable article, Mitchell Harper made several predictions about how e-commerce will change based on Facebook. His five points are not far-fetched at all, so we need to watch this space carefully.

Read the article

Hiding the Flash Message After a Time Delay

- by Madhan ayyasamy

Hi Friends,The flash hash is a great way to provide feedback to your users.Here is a quick tip for hiding the flash message after a period of time if you don’t want to leave it lingering around.First, add this line to the head of your layout to ensure the prototype and script.aculo.us javascript libraries are loaded:Next, add the following to either your layout (recommended), your view templates or a partial depending on your needs. I usually add this to a partial and include the partial in my layouts. "flash", :id = flash_type % "text/javascript" do % setTimeout("new Effect.Fade('');", 10000); This will wrap the flash message in a div with class=‘flash’ and id=‘error’, ‘notice’ or ‘warn’ depending on the flash key specified.The value ‘10000’ is the time in milliseconds before the flash will disappear. In this case, 10 seconds.This function looks pretty good and little javascript stunts like this can help make your site feel more professional. It’s also worth bearing in mind though, not everybody can see well or read as quickly as others so this may not be suitable for every application.Update:As Mitchell has pointed out (see comments below), it may be better to set the flash_type as the div class rather than it’s id. If there is the possibility that you’ll be showing more than one flash message per page, setting the flash_type as the div id will result in your HTML/XHTML code becoming invalid because the unique intentifier will be used more than once per page.Here is a slightly more complex version of the method shown above that will hide all divs with class ‘flash’ after a time delay, achieving the same effect and also ensuring your code stays valid with more than one flash message! "flash #{flash_type}" % "text/javascript" do % setTimeout("$$('div.flash').each(function(flash){ flash.hide();})", 10000); In this example, the div id is not set at all. Instead, each flash div will have class “div” and also class of the type of flash message (“error”, “warning” etc.).Have a Great Day..:)

Read the article

Speaking at UK DevConnections in www.DevConnections.com/uk and discount codes

- by Testas

HiI will be speaking at the UK DevConnections on Analysis Services at the ExCeL conference centre in London on 13th-15th June 2011. Join top SQL Server names such as Paul Randall, Kimberley Tripp, Simon Sabin and Allan Mitchell ( to name a few), at the IT & DevConnections powered by Microsoft UK in London on 13th-15th June 2011. With UK DevConnections you can combine SQL Sessions with other Microsoft technology stacks. Microsoft and leading independent industry presenters will deliver in-depth presentations and cutting edge sessions on SharePoint Windows Exchange and Unified Communications SQL Server Silverlight ASP.Net Virtualisation Cloud and Azure As a speaker I have a discount code that entitles give 20% off the cost to register for IT&DEvConnections in June. The code is sql-bits, if people register before the 31st March when the Super Early Bird offer ends you will only pay £639.20 +vat (normal price £999)Furthermore, there are preferential hotel rates for this event at: https://logicalvenues.vbookings.co.uk/b/pentonlondon0611/ So if you want to attend a conference with a wide spectrum of technologies, then DevConnections may be up your street Thanks Chris

Read the article

1 ASPX Page, Multiple Master Pages

- by csmith18119

So recently I had an ASPX page that could be visited by two different user types. User type A would use Master Page 1 and user type B would use Master Page 2. So I put together a proof of concept to see if it was possible to change the MasterPage in code. I found a great article on the Microsoft ASP.net website. Specifying the Master Page Programmatically (C#) by Scott Mitchell So I created a MasterPage call Alternate.Master to act as a generic place holder. I also created a Master1.Master and a Master2.Master. The ASPX page, Default.aspx will use this MasterPage. It will also use the Page_PreInit event to programmatically set the MasterPage. 1: protected void Page_PreInit(object sender, EventArgs e) { 2: var useMasterPage = Request.QueryString["use"]; 3: if (useMasterPage == "1") 4: MasterPageFile = "~/Master1.Master"; 5: else if (useMasterPage == "2") 6: MasterPageFile = "~/Master2.Master"; 7: } In my Default.aspx page I have the following links in the markup: 1: <p> 2: <asp:HyperLink runat="server" ID="cmdMaster1" NavigateUrl="~/Default.aspx?use=1" Text="Use Master Page 1" /> 3: </p> 4: <p> 5: <asp:HyperLink runat="server" ID="cmdMaster2" NavigateUrl="~/Default.aspx?use=2" Text="Use Master Page 2" /> 6: </p> So the basic idea is when a user clicks the HyperLink to use Master Page 1, the default.aspx.cs code behind will set the property MasterPageFile to use Master1.Master. The same goes with the link to use Master Page 2. It worked like a charm! To see the actual code, feel free to download a copy here: Project Name: Skyhook.MultipleMasterPagesWeb http://skyhookprojectviewer.codeplex.com

Read the article

How to know what you don't know?

- by Ivo Danihelka

Is there a way how to recognize that you don't know something? For example, I had some hard realizations: I didn't know that criticism isn't a good way to teach your friends. I realized that after reading How to Win Friends & Influence People. I didn't know about the fundamental needed for an indutive bias in machine learning. If I have read Mitchell's Machine Learning book early, I would know it. I haven't found it mentioned in other books and papers. Sorry if the question is too generic. The question could also mean: How to know that you are missing something important about your programming language?

Read the article

Genetics algorithms theoretical question

- by mandelart

Hi All! I'm currently reading "Artificial Intelligence: A Modern Approach" (Russell+Norvig) and "Machine Learning" (Mitchell) - and trying to learn basics of AINN. In order to understand few basic things I have two 'greenhorn' questions: Q1: In a genetic algorithm given the two parents A and B with the chromosomes 001110 and 101101, respectively, which of the following offspring could have resulted from a one-point crossover? a: 001101 b: 001110 Q2: Which of the above offspring could have resulted from a two-point crossover? and why? Please advise.

Read the article

The Connected Company: WebCenter Portal Activity Streams

- by Michael Snow

Guest post by Mitchell Palski, Oracle Staff Sales Consultant Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Social media is sure to have made its way into your company or government organization. Whether its discussion threads, blog posts, Facebook-style profile-pages, or just a simple Instant Messenger application; in one way or another, your employees are connected. What are the objectives of leveraging social media in your organization? Facilitating knowledge transfer More effectively organizing team events Generating inter-community discussions to solve problems Improving resource management Increasing organizational awareness Creating an environment of accountability Do any of the business objectives above stand out to you as needs? If so, consider leveraging the WebCenter Portal Activity Stream as part of your solution. In WebCenter Portal, the Activity Stream feature provides a streaming view of the activities of your connections, actions taken in portals, and business activities that looks a lot like a combined Facebook and Twitter newsfeed. Activity Stream can note when a user: Posts feedback (comments) Uploads a document Creates a new blog, page, event, or announcement Starts a new discussion Streams messages and attachments entered through WebCenter Publisher (similar to Twitter) Through Activity Stream Preferences, you can select which of these activities to show or hide from your personal Activity Stream. Here’s what you get: Real-time stream of activities with in a Portal or sub-Portal increases awareness across your organization or within a working group Complete list of user actions reduces the time-to-find for users that need to interact with the latest activities in your portal Users can publish to their groups when tasks are finished for complete group traceability and accountability, as well as improved resource management. Project discussions and shared documents that require the expertise of someone outside of a working group now get increased visibility across your organization. There’s a reason that commercial Social Media tools like Facebook and Twitter have been so successful – they spread information in an aesthetically appealing and easy to read format. Strategically placing an Activity Feed within your Portal is analogous to sending your employees a daily newsletter, events calendar, recent documents report, and list of announcements – BUT ALL IN ONE!

Read the article

June 26th Links: ASP.NET, ASP.NET MVC, .NET and NuGet

- by ScottGu

Here is the latest in my link-listing series. Also check out my Best of 2010 Summary for links to 100+ other posts I’ve done in the last year. [I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Introducing new ASP.NET Universal Providers: Great post from Scott Hanselman on the new System.Web.Providers we are working on. This release delivers new ASP.NET Membership, Role Management, Session, Profile providers that work with SQL Server, SQL CE and SQL Azure. CSS Sprites and the ASP.NET Sprite and Image Optimization Library: Great post from Scott Mitchell that talks about a free library for ASP.NET that you can use to optimize your CSS and images to reduce HTTP requests and speed up your site. Better HTML5 Support for the VS 2010 Editor: Another great post from Scott Hanselman on an update several people on my team did that enables richer HTML5 editing support within Visual Studio 2010. Install the Ajax Control Toolkit from NuGet: Nice post by Stephen Walther on how you can now use NuGet to install the Ajax Control Toolkit within your applications. This makes it much easier to reference and use. May 2011 Release of the Ajax Control Toolkit: Another great post from Stephen Walther that talks about the May release of the Ajax Control Toolkit. It includes a bunch of nice enhancements and fixes. SassAndCoffee 0.9 Released: Paul Betts blogs about the latest release of his SassAndCoffee extension (available via NuGet). It enables you to easily use Sass and Coffeescript within your ASP.NET applications (both MVC and Webforms). ASP.NET MVC ASP.NET MVC Mini-Profiler: The folks at StackOverflow.com (a great site built with ASP.NET MVC) have released a nice (free) profiler they’ve built that enables you to easily profile your ASP.NET MVC 3 sites and tune them for performance. Globalization, Internationalization and Localization in ASP.NET MVC 3: Great post from Scott Hanselman on how to enable internationalization, globalization and localization support within your ASP.NET MVC 3 and jQuery solutions. Precompile your MVC Razor Views: Great post from David Ebbo that discusses a new Razor Generator tool that enables you to pre-compile your razor view templates as assemblies – which enables a bunch of cool scenarios. Unit Testing Razor Views: Nice post from David Ebbo that shows how to use his new Razor Generator to enable unit testing of razor view templates with ASP.NET MVC. Bin Deploying ASP.NET MVC 3: Nice post by Phil Haack that covers a cool feature added to VS 2010 SP1 that makes it really easy to \bin deploy ASP.NET MVC and Razor within your application. This enables you to easily deploy the app to servers that don’t have ASP.NET MVC 3 installed. .NET Table Splitting with EF 4.1 Code First: Great post from Morteza Manavi that discusses how to split up a single database table across multiple EF entity classes. This shows off some of the power behind EF 4.1 and is very useful when working with legacy database schemas. Choosing the Right Collection Class: Nice post from James Michael Hare that talks about the different collection class options available within .NET. A nice overview for people who haven’t looked at all of the support now built into the framework. Little Wonders: Empty(), DefaultIfEmpty() and Count() helper methods: Another in James Michael Hare’s excellent series on .NET/C# “Little Wonders”. This post covers some of the great helper methods now built-into .NET that make coding even easier. NuGet NuGet 1.4 Released: Learn all about the latest release of NuGet – which includes a bunch of cool new capabilities. It takes only seconds to update to it – go for it! NuGet in Depth: Nice presentation from Scott Hanselman all about NuGet and some of the investments we are making to enable a better open source ecosystem within .NET. NuGet for the Enterprise – NuGet in a Continuous Integration Automated Build System: Great post from Scott Hanselman on how to integrate NuGet within enterprise build environments and enable it with CI solutions. Hope this helps, Scott

Read the article

PHP Web Services - Nice try

Thanks to the membership in the O'Reilly User Group Programme the Mauritius Software Craftsmanship Community (short: MSCC) recently received a welcome package with several book titles. Among them is the latest publication of Lorna Jane Mitchell - 'PHP Web Services: APIs for the Modern Web'. Following is the book review I put on Amazon: Nice try! Initially, I was astonished that a small book like 'PHP Web Services' would be able to cover all the interesting topics about APIs and Web Services, independently whether they are written in PHP or not. And unfortunately, the title isn't able to stand up to the readers (or at least my) expectations. Maybe as a light defense, there is no usual paragraph about the intended audience of that book, but still I have to admit that the first half (chapters 1 to 8) are well written and Lorna has her points on the various technologies. Also, the code samples in PHP are clean and easy to understand. With chapter 'Debugging Web Services' the book started to change my mind about the clarity of advice and the instructions on designing and developing good APIs. Eventually, this might be related to the fact that I'm used to other tools since years, like Telerik Fiddler as HTTP proxy in order to trace and inspect any kind of request/response handling. Including localhost monitoring, SSL certification acceptance, and the ability to debug mobile devices, especially iOS-based ones. Compared to Charles, Fiddler is available for free. What really got me off the hook is the following statement in chapter 10 about Service Type Decisions: "For users who have larger systems using technology stacks such as Java, C++, or .NET, it may be easier for them to integrate with a SOAP service." WHAT? A couple of pages earlier the author recommends to stay away from 'old-fashioned' API styles like SOAP (if possible). And on top of that I wonder why there are tons of documentation towards development of RESTful Web Services based on WebAPI. The ASP.NET stack clearly moves away from SOAP to JSON and REST since years! Honestly, as a software developer on the .NET stack this leaves a mixed feeling after all. As for the remaining chapters I simply consider them as 'blah blah' without any real value and lots of theoretical advice. Related to the chapter 13 about 'Documentation', I just had the 'pleasure' to write a C#-based client against a Java-based SOAP Web Service. Personally, I take the WSDL as the master reference in the first place and Visual Studio generates all the stub types involved in the communication. During the implementation and testing I came across a 'java.lang.NullPointerException' in various methods and for various method parameters. The WSDL and the generated types were declared as Nullable, so nothing to worry about, or? Well, I logged in a support ticket, and guess what was the response to that scenario? "The service definition in the WSDL is wrong, please refer to the documentation in order to use the methods and parameters correctly" - No comment! Lorna's title is a quick read and in some areas she has good advice on designing and implementing Web Services and APIs. But roughly 100 pages aren't enough to cover a vast topic like that. After all, nice try and I'm looking forward to an improved second edition. Honestly, I never thought that I would come across a poor review. In general, it's a good book but it clearly has a lack of depth, the PHP code samples are incomplete (closing tags missing), and there are too many assumptions and theoretical statements.

Read the article

The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

- by Michael Snow

Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

Read the article

Cleaner ClientID's with ASP.NET 4.0

- by amaniar

Normal 0 false false false EN-US X-NONE HI /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} A common complain we have had when using ASP.NET web forms is the inability to control the ID attributes being rendered in the HTML markup when using server controls. Our Interface Engineers want to be able to predict the ID’s of controls thereby having more control over their client side code for selecting/manipulating elements by ID or using CSS to target them. While playing with the just released VS2010 and .NET 4.0 I discovered some real cool improvements. One of them is the ability to now have full control over the ID being rendered for server controls. ASP.NET 4.0 controls now have a new ClientIDMode property which gives the developer complete control over the ID’s being rendered making it easy to write JavaScript and CSS against the rendered html. By default the ClientIDMode is set to Predictable which results in clean and predictable ID’s by concatenating the ID’s of the Parent and child controls. So the following markup: <asp:Content ID="ParentContainer" ContentPlaceHolderID="MainContentPlaceHolder" runat="server"> <asp:Label runat="server" ID="MyLabel">My Label</asp:Label> </asp:Content> Will render: <span id="ParentContainer_MyLabel">My Label</span> Instead of something like this: (current) <span id="ct100_ParentContainer_MyLabel">My Label</span> Other modes include AutoID (renders ID’s like it currently does in .NET 3.5), Static (renders the ID exactly as specified in the code) and Inherit (defers the mode to the parent control). So now I can write my jQuery selector as: $(“ParentContainer_MyLabel”).text(“My new Text”); Instead of: $(‘<%=this. MyLabel.ClientID%>’).text(“My new Text”); Scott Mitchell has a great article about this new feature: http://bit.ly/ailEJ2 Am excited about this and some other improvements. Many thanks to the ASP.NET team for Listening!

Read the article

Using Content Analytics for More Effective Engagement

- by Kellsey Ruppel

Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable. Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

Read the article

May 20th Links: ASP.NET MVC, ASP.NET, .NET 4, VS 2010, Silverlight

- by ScottGu

Here is the latest in my link-listing series. Also check out my VS 2010 and .NET 4 series and ASP.NET MVC 2 series for other on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET MVC How to Localize an ASP.NET MVC Application: Michael Ceranski has a good blog post that describes how to localize ASP.NET MVC 2 applications. ASP.NET MVC with jTemplates Part 1 and Part 2: Steve Gentile has a nice two-part set of blog posts that demonstrate how to use the jTemplate and DataTable jQuery libraries to implement client-side data binding with ASP.NET MVC. CascadingDropDown jQuery Plugin for ASP.NET MVC: Raj Kaimal has a nice blog post that demonstrates how to implement a dynamically constructed cascading dropdownlist on the client using jQuery and ASP.NET MVC. How to Configure VS 2010 Code Coverage for ASP.NET MVC Unit Tests: Visual Studio enables you to calculate the “code coverage” of your unit tests. This measures the percentage of code within your application that is exercised by your tests – and can give you a sense of how much test coverage you have. Gunnar Peipman demonstrates how to configure this for ASP.NET MVC projects. Shrinkr URL Shortening Service Sample: A nice open source application and code sample built by Kazi Manzur that demonstrates how to implement a URL Shortening Services (like bit.ly) using ASP.NET MVC 2 and EF4. More details here. Creating RSS Feeds in ASP.NET MVC: Damien Guard has a nice post that describes a cool new “FeedResult” class he created that makes it easy to publish and expose RSS feeds from within ASP.NET MVC sites. NoSQL with MongoDB, NoRM and ASP.NET MVC Part 1 and Part 2: Nice two-part blog series by Shiju Varghese on how to use MongoDB (a document database) with ASP.NET MVC. If you are interested in document databases also make sure to check out the Raven DB project from Ayende. Using the FCKEditor with ASP.NET MVC: Quick blog post that describes how to use FCKEditor – an open source HTML Text Editor – with ASP.NET MVC. ASP.NET Replace Html.Encode Calls with the New HTML Encoding Syntax: Phil Haack has a good blog post that describes a useful way to quickly update your ASP.NET pages and ASP.NET MVC views to use the new <%: %> encoding syntax in ASP.NET 4. I blogged about the new <%: %> syntax – it provides an easy and concise way to HTML encode content. Integrating Twitter into an ASP.NET Website using OAuth: Scott Mitchell has a nice article that describes how to take advantage of Twiter within an ASP.NET Website using the OAuth protocol – which is a simple, secure protocol for granting API access. Creating an ASP.NET report using VS 2010 Part 1, Part 2, and Part 3: Raj Kaimal has a nice three part set of blog posts that detail how to use SQL Server Reporting Services, ASP.NET 4 and VS 2010 to create a dynamic reporting solution. Three Hidden Extensibility Gems in ASP.NET 4: Phil Haack blogs about three obscure but useful extensibility points enabled with ASP.NET 4. .NET 4 Entity Framework 4 Video Series: Julie Lerman has a nice, free, 7-part video series on MSDN that walks through how to use the new EF4 capabilities with VS 2010 and .NET 4. I’ll be covering EF4 in a blog series that I’m going to start shortly as well. Getting Lazy with System.Lazy: System.Lazy and System.Lazy<T> are new features in .NET 4 that provide a way to create objects that may need to perform time consuming operations and defer the execution of the operation until it is needed. Derik Whittaker has a nice write-up that describes how to use it. LINQ to Twitter: Nifty open source library on Codeplex that enables you to use LINQ syntax to query Twitter. Visual Studio 2010 Using Intellitrace in VS 2010: Chris Koenig has a nice 10 minute video that demonstrates how to use the new Intellitrace features of VS 2010 to enable DVR playback of your debug sessions. Make the VS 2010 IDE Colors look like VS 2008: Scott Hanselman has a nice blog post that covers the Visual Studio Color Theme Editor extension – which allows you to customize the VS 2010 IDE however you want. How to understand your code using Dependency Graphs, Sequence Diagrams, and the Architecture Explorer: Jennifer Marsman has a nice blog post describes how to take advantage of some of the new architecture features within VS 2010 to quickly analyze applications and legacy code-bases. How to maintain control of your code using Layer Diagrams: Another great blog post by Jennifer Marsman that demonstrates how to setup a “layer diagram” within VS 2010 to enforce clean layering within your applications. This enables you to enforce a compiler error if someone inadvertently violates a layer design rule. Collapse Selection in Solution Explorer Extension: Useful VS 2010 extension that enables you to quickly collapse “child nodes” within the Visual Studio Solution Explorer. If you have deeply nested project structures this extension is useful. Silverlight and Windows Phone 7 Building a Simple Windows Phone 7 Application: A nice tutorial blog post that demonstrates how to take advantage of Expression Blend to create an animated Windows Phone 7 application. If you haven’t checked out my Windows Phone 7 Twitter Tutorial I also recommend reading that. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

Read the article

Your thoughts on Best Practices for Scientific Computing?

- by John Smith

A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

Read the article

RSS Feeds currently on Simple-Talk

- by Andrew Clarke

There are a number of news-feeds for the Simple-Talk site, but for some reason they are well hidden. Whilst we set about reorganizing them, I thought it would be a good idea to list some of the more important ones. The most important one for almost all purposes is the Homepage RSS feed which represents the blogs and articles that are placed on the homepage. Main Site Feed representing the Homepage ..which is good for most purposes but won't always have all the blogs, or maybe it will occasionally miss an article. If you aren't interested in all the content, you can just use the RSS feeds that are more relevant to your interests. (We'll be increasing these categories soon) The newsfeed for SQL articles The .NET section newsfeed The newsfeed for Red Gate books The newsfeed for Opinion articles The SysAdmin section newsfeed if you want to get a more refined feed, then you can pick and choose from these feeds for each category so as to make up your custom news-feed in the SQL section, SQL Training Learn SQL Server Database Administration TSQL Programming SQL Server Performance Backup and Recovery SQL Tools SSIS SSRS (Reporting Services) in .NET there are... ASP.NET Windows Forms .NET Framework ,NET Performance Visual Studio .NET tools in Sysadmin there are Exchange General Virtualisation Unified Messaging Powershell in opinion, there is... Geek of the Week Opinion Pieces in Books, there is .NET Books SQL Books SysAdmin Books And all the blogs have got feeds. So although you can get all the blogs from here.. Main Blog Feed You can get individual RSS feeds.. AdamRG's Blog Alex.Davies's Blog AliceE's Blog Andrew Clarke's Blog Andrew Hunter's Blog Bart Read's Blog Ben Adderson's Blog BobCram's Blog bradmcgehee's Blog Brian Donahue's Blog Charles Brown's Blog Chris Massey's Blog CliveT's Blog Damon's Blog David Atkinson's Blog David Connell's Blog Dr Dionysus's Blog drsql's Blog FatherJack's Blog Flibble's Blog Gareth Marlow's Blog Helen Joyce's Blog James's Blog Jason Crease's Blog John Magnabosco's Blog Laila's Blog Lionel's Blog Matt Lee's Blog mikef's Blog Neil Davidson's Blog Nigel Morse's Blog Phil Factor's Blog red@work's Blog reka.burmeister's Blog Richard Mitchell's Blog RobbieT's Blog RobertChipperfield's Blog Rodney's Blog Roger Hart's Blog Simon Cooper's Blog Simon Galbraith's Blog TheFutureOfMonitoring's Blog Tim Ford's Blog Tom Crossman's Blog Tony Davis's Blog As well as these blogs, you also have the forums.... SQL Server for Beginners Forum Programming SQL Server Forum Administering SQL Server Forum .NET framework Forum .Windows Forms Forum ASP.NET Forum ADO.NET Forum

Read the article

2010 Collaboration Summit Impressions

- by Elena Zannoni

It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

Read the article

SQL SERVER – SSIS Parameters in Parent-Child ETL Architectures – Notes from the Field #040

- by Pinal Dave

[Notes from Pinal]: SSIS is very well explored subject, however, there are so many interesting elements when we read, we learn something new. A similar concept has been Parent-Child ETL architecture’s relationship in SSIS. Linchpin People are database coaches and wellness experts for a data driven world. In this 40th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to understand SSIS Parameters in Parent-Child ETL Architectures. In this brief Notes from the Field post, I will review the use of SSIS parameters in parent-child ETL architectures. A very common design pattern used in SQL Server Integration Services is one I call the parent-child pattern. Simply put, this is a pattern in which packages are executed by other packages. An ETL infrastructure built using small, single-purpose packages is very often easier to develop, debug, and troubleshoot than large, monolithic packages. For a more in-depth look at parent-child architectures, check out my earlier blog post on this topic. When using the parent-child design pattern, you will frequently need to pass values from the calling (parent) package to the called (child) package. In older versions of SSIS, this process was possible but not necessarily simple. When using SSIS 2005 or 2008, or even when using SSIS 2012 or 2014 in package deployment mode, you would have to create package configurations to pass values from parent to child packages. Package configurations, while effective, were not the easiest tool to work with. Fortunately, starting with SSIS in SQL Server 2012, you can now use package parameters for this purpose. In the example I will use for this demonstration, I’ll create two packages: one intended for use as a child package, and the other configured to execute said child package. In the parent package I’m going to build a for each loop container in SSIS, and use package parameters to pass in a value – specifically, a ClientID – for each iteration of the loop. The child package will be executed from within the for each loop, and will create one output file for each client, with the source query and filename dependent on the ClientID received from the parent package. Configuring the Child and Parent Packages When you create a new package, you’ll see the Parameters tab at the package level. Clicking over to that tab allows you to add, edit, or delete package parameters. As shown above, the sample package has two parameters. Note that I’ve set the name, data type, and default value for each of these. Also note the column entitled Required: this allows me to specify whether the parameter value is optional (the default behavior) or required for package execution. In this example, I have one parameter that is required, and the other is not. Let’s shift over to the parent package briefly, and demonstrate how to supply values to these parameters in the child package. Using the execute package task, you can easily map variable values in the parent package to parameters in the child package. The execute package task in the parent package, shown above, has the variable vThisClient from the parent package mapped to the pClientID parameter shown earlier in the child package. Note that there is no value mapped to the child package parameter named pOutputFolder. Since this parameter has the Required property set to False, we don’t have to specify a value for it, which will cause that parameter to use the default value we supplied when designing the child pacakge. The last step in the parent package is to create the for each loop container I mentioned earlier, and place the execute package task inside it. I’m using an object variable to store the distinct client ID values, and I use that as the iterator for the loop (I describe how to do this more in depth here). For each iteration of the loop, a different client ID value will be passed into the child package parameter. The final step is to configure the child package to actually do something meaningful with the parameter values passed into it. In this case, I’ve modified the OleDB source query to use the pClientID value in the WHERE clause of the query to restrict results for each iteration to a single client’s data. Additionally, I’ll use both the pClientID and pOutputFolder parameters to dynamically build the output filename. As shown, the pClientID is used in the WHERE clause, so we only get the current client’s invoices for each iteration of the loop. For the flat file connection, I’m setting the Connection String property using an expression that engages both of the parameters for this package, as shown above. Parting Thoughts There are many uses for package parameters beyond a simple parent-child design pattern. For example, you can create standalone packages (those not intended to be used as a child package) and still use parameters. Parameter values may be supplied to a package directly at runtime by a SQL Server Agent job, through the command line (via dtexec.exe), or through T-SQL. Also, you can also have project parameters as well as package parameters. Project parameters work in much the same way as package parameters, but the parameters apply to all packages in a project, not just a single package. Conclusion Of the numerous advantages of using catalog deployment model in SSIS 2012 and beyond, package parameters are near the top of the list. Parameters allow you to easily share values from parent to child packages, enabling more dynamic behavior and better code encapsulation. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Windows in StreamInsight: Hopping vs. Snapshot

- by Roman Schindlauer

Three weeks ago, we explained the basic concept of windows in StreamInsight: defining sets of events that serve as arguments for set-based operations, like aggregations. Today, we want to discuss the so-called Hopping Windows and compare them with Snapshot Windows. We will compare these two, because they can serve similar purposes with different behaviors; we will discuss the remaining window type, Count Windows, another time. Hopping (and its syntactic-sugar-sister Tumbling) windows are probably the most straightforward windowing concept in StreamInsight. A hopping window is defined by its length, and the offset from one window to the next. They are aligned with some absolute point on the timeline (which can also be given as a parameter to the window) and create sets of events. The diagram below shows an example of a hopping window with length of 1h and hop size (the offset) of 15 minutes, hence creating overlapping windows: Two aspects in this diagram are important: Since this window is overlapping, an event can fall into more than one windows. If an (interval) event spans a window boundary, its lifetime will be clipped to the window, before it is passed to the set-based operation. That’s the default and currently only available window input policy. (This should only concern you if you are using a time-sensitive user-defined aggregate or operator.) The set-based operation will be applied to each of these sets, yielding a result. This result is: A single scalar value in case of built-in or user-defined aggregates. A subset of the input payloads, in case of the TopK operator. Arbitrary events, when using a user-defined operator. The timestamps of the result are almost always the ones of the windows. Only the user-defined operator can create new events with timestamps. (However, even these event lifetimes are subject to the window’s output policy, which is currently always to clip to the window end.) Let’s assume we were calculating the sum over some payload field: var result = from window in source.HoppingWindow( TimeSpan.FromHours(1), TimeSpan.FromMinutes(15), HoppingWindowOutputPolicy.ClipToWindowEnd) select new { avg = window.Avg(e => e.Value) }; Now each window is reflected by one result event: As you can see, the window definition defines the output frequency. No matter how many or few events we got from the input, this hopping window will produce one result every 15 minutes – except for those windows that do not contain any events at all, because StreamInsight window operations are empty-preserving (more about that another time). The “forced” output for every window can become a performance issue if you have a real-time query with many events in a wide group & apply – let me explain: imagine you have a lot of events that you group by and then aggregate within each group – classical streaming pattern. The hopping window produces a result in each group at exactly the same point in time for all groups, since the window boundaries are aligned with the timeline, not with the event timestamps. This means that the query output will become very bursty, delivering the results of all the groups at the same point in time. This becomes especially obvious if the events are long-lasting, spanning multiple windows each, so that the produced result events do not change their value very often. In such a case, a snapshot window can remedy. Snapshot windows are more difficult to explain than hopping windows: they represent those periods in time, when no event changes occur. In other words, if you mark all event start and and times on your timeline, then you are looking at all snapshot window boundaries: If your events are never overlapping, the snapshot window will not make much sense. It is commonly used together with timestamp modification, which make it a very powerful tool. Or as Allan Mitchell expressed in in a recent tweet: “I used to look at SnapshotWindow() with disdain. Now she is my mistress, the one I turn to in times of trouble and need”. Let’s look at a simple example: I want to compute the average of some value in my events over the last minute. I don’t want this output be produced at fixed intervals, but at soon as it changes (that’s the true event-driven spirit!). The snapshot window will include all currently active event at each point in time, hence we need to extend our original events’ lifetimes into the future: Applying the Snapshot window on these events, it will appear to be “looking back into the past”: If you look at the result produced in this diagram, you can easily prove that, at each point in time, the current event value represents the average of all original input event within the last minute. Here is the LINQ representation of that query, applying the lifetime extension before the snapshot window: var result = from window in source .AlterEventDuration(e => TimeSpan.FromMinutes(1)) .SnapshotWindow(SnapshotWindowOutputPolicy.Clip) select new { avg = window.Avg(e => e.Value) }; With more complex modifications of the event lifetimes you can achieve many more query patterns. For instance “running totals” by keeping the event start times, but snapping their end times to some fixed time, like the end of the day. Each snapshot then “sees” all events that have happened in the respective time period so far. Regards, The StreamInsight Team

Read the article

SQL SERVER – SSIS Look Up Component – Cache Mode – Notes from the Field #028

- by Pinal Dave

[Notes from Pinal]: Lots of people think that SSIS is all about arranging various operations together in one logical flow. Well, the understanding is absolutely correct, but the implementation of the same is not as easy as it seems. Similarly most of the people think lookup component is just component which does look up for additional information and does not pay much attention to it. Due to the same reason they do not pay attention to the same and eventually get very bad performance. Linchpin People are database coaches and wellness experts for a data driven world. In this 28th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to write a good lookup component with Cache Mode. In SQL Server Integration Services, the lookup component is one of the most frequently used tools for data validation and completion. The lookup component is provided as a means to virtually join one set of data to another to validate and/or retrieve missing values. Properly configured, it is reliable and reasonably fast. Among the many settings available on the lookup component, one of the most critical is the cache mode. This selection will determine whether and how the distinct lookup values are cached during package execution. It is critical to know how cache modes affect the result of the lookup and the performance of the package, as choosing the wrong setting can lead to poorly performing packages, and in some cases, incorrect results. Full Cache The full cache mode setting is the default cache mode selection in the SSIS lookup transformation. Like the name implies, full cache mode will cause the lookup transformation to retrieve and store in SSIS cache the entire set of data from the specified lookup location. As a result, the data flow in which the lookup transformation resides will not start processing any data buffers until all of the rows from the lookup query have been cached in SSIS. The most commonly used cache mode is the full cache setting, and for good reason. The full cache setting has the most practical applications, and should be considered the go-to cache setting when dealing with an untested set of data. With a moderately sized set of reference data, a lookup transformation using full cache mode usually performs well. Full cache mode does not require multiple round trips to the database, since the entire reference result set is cached prior to data flow execution. There are a few potential gotchas to be aware of when using full cache mode. First, you can see some performance issues – memory pressure in particular – when using full cache mode against large sets of reference data. If the table you use for the lookup is very large (either deep or wide, or perhaps both), there’s going to be a performance cost associated with retrieving and caching all of that data. Also, keep in mind that when doing a lookup on character data, full cache mode will always do a case-sensitive (and in some cases, space-sensitive) string comparison even if your database is set to a case-insensitive collation. This is because the in-memory lookup uses a .NET string comparison (which is case- and space-sensitive) as opposed to a database string comparison (which may be case sensitive, depending on collation). There’s a relatively easy workaround in which you can use the UPPER() or LOWER() function in the pipeline data and the reference data to ensure that case differences do not impact the success of your lookup operation. Again, neither of these present a reason to avoid full cache mode, but should be used to determine whether full cache mode should be used in a given situation. Full cache mode is ideally useful when one or all of the following conditions exist: The size of the reference data set is small to moderately sized The size of the pipeline data set (the data you are comparing to the lookup table) is large, is unknown at design time, or is unpredictable Each distinct key value(s) in the pipeline data set is expected to be found multiple times in that set of data Partial Cache When using the partial cache setting, lookup values will still be cached, but only as each distinct value is encountered in the data flow. Initially, each distinct value will be retrieved individually from the specified source, and then cached. To be clear, this is a row-by-row lookup for each distinct key value(s). This is a less frequently used cache setting because it addresses a narrower set of scenarios. Because each distinct key value(s) combination requires a relational round trip to the lookup source, performance can be an issue, especially with a large pipeline data set to be compared to the lookup data set. If you have, for example, a million records from your pipeline data source, you have the potential for doing a million lookup queries against your lookup data source (depending on the number of distinct values in the key column(s)). Therefore, one has to be keenly aware of the expected row count and value distribution of the pipeline data to safely use partial cache mode. Using partial cache mode is ideally suited for the conditions below: The size of the data in the pipeline (more specifically, the number of distinct key column) is relatively small The size of the lookup data is too large to effectively store in cache The lookup source is well indexed to allow for fast retrieval of row-by-row values No Cache As you might guess, selecting no cache mode will not add any values to the lookup cache in SSIS. As a result, every single row in the pipeline data set will require a query against the lookup source. Since no data is cached, it is possible to save a small amount of overhead in SSIS memory in cases where key values are not reused. In the real world, I don’t see a lot of use of the no cache setting, but I can imagine some edge cases where it might be useful. As such, it’s critical to know your data before choosing this option. Obviously, performance will be an issue with anything other than small sets of data, as the no cache setting requires row-by-row processing of all of the data in the pipeline. I would recommend considering the no cache mode only when all of the below conditions are true: The reference data set is too large to reasonably be loaded into SSIS memory The pipeline data set is small and is not expected to grow There are expected to be very few or no duplicates of the key values(s) in the pipeline data set (i.e., there would be no benefit from caching these values) Conclusion The cache mode, an often-overlooked setting on the SSIS lookup component, represents an important design decision in your SSIS data flow. Choosing the right lookup cache mode directly impacts the fidelity of your results and the performance of package execution. Know how this selection impacts your ETL loads, and you’ll end up with more reliable, faster packages. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

Read the article

Phone-book Database Help - Python

- by IDOntWantThat

I'm new to programming and have an assignment I've been working at for awhile. I understand defining functions and a lot of the basics but I'm kind of running into a brick wall at this point. I'm trying to figure this one out and don't really understand how the 'class' feature works yet. I'd appreciate any help with this one; also any help with some python resources that have can dummy down how/why classes are used. You've been going to work on a database project at work for sometime now. Your boss encourages you to program the database in Python. You disagree, arguing that Python is not a database language but your boss persists by providing the source code below for a sample telephone database. He asks you to do two things: Evaluate the existing source code and extend it to make it useful for managers in the firm. (You do not need a GUI interface, just work on the database aspects: data entry and retrieval - of course you must get the program to run or properly work He wants you to critically evaluate Python as a database tool. Import the sample code below into the Python IDLE and enhance it, run it and debug it. Add features to make this a more realistic database tool by providing for easy data entry and retrieval. import shelve import string UNKNOWN = 0 HOME = 1 WORK = 2 FAX = 3 CELL = 4 class phoneentry: def __init__(self, name = 'Unknown', number = 'Unknown', type = UNKNOWN): self.name = name self.number = number self.type = type # create string representation def __repr__(self): return('%s:%d' % ( self.name, self.type )) # fuzzy compare or two items def __cmp__(self, that): this = string.lower(str(self)) that = string.lower(that) if string.find(this, that) >= 0: return(0) return(cmp(this, that)) def showtype(self): if self.type == UNKNOWN: return('Unknown') if self.type == HOME: return('Home') if self.type == WORK: return('Work') if self.type == FAX: return('Fax') if self.type == CELL: return('Cellular') class phonedb: def __init__(self, dbname = 'phonedata'): self.dbname = dbname; self.shelve = shelve.open(self.dbname); def __del__(self): self.shelve.close() self.shelve = None def add(self, name, number, type = HOME): e = phoneentry(name, number, type) self.shelve[str(e)] = e def lookup(self, string): list = [] for key in self.shelve.keys(): e = self.shelve[key] if cmp(e, string) == 0: list.append(e) return(list) # if not being loaded as a module, run a small test if __name__ == '__main__': foo = phonedb() foo.add('Sean Reifschneider', '970-555-1111', HOME) foo.add('Sean Reifschneider', '970-555-2222', CELL) foo.add('Evelyn Mitchell', '970-555-1111', HOME) print 'First lookup:' for entry in foo.lookup('reifsch'): print '%-40s %s (%s)' % ( entry.name, entry.number, entry.showtype() ) print print 'Second lookup:' for entry in foo.lookup('e'): print '%-40s %s (%s)' % ( entry.name, entry.number, entry.showtype() ) I'm not sure if I'm on the right track but here is what I have so far: def openPB(): foo = phonedb() print 'Please select an option:' print '1 - Lookup' print '2 - Add' print '3 - Delete' print '4 - Quit' entry=int(raw_input('>> ')) if entry==1: namelookup=raw_input('Please enter a name: ') for entry in foo.lookup(namelookup): print '%-40s %s (%s)' % (entry.name, entry.number, entry.showtype() ) elif entry==2: name=raw_input('Name: ') number=raw_input('Number: ') showtype=input('Type (UNKNOWN, HOME, WORK, FAX, CELL): \n>> ') for entry in foo.add(name, number, showtype): #Trying to figure out this part print '%-40s %s (%s)'% (entry.name, entry.number, entry.showtype() ) elif entry==3: delname=raw_input('Please enter a name to delete: ') # #Trying to figure out this part print "Contact '%s' has been deleted" (delname) elif entry==4: print "Phone book is now closed" quit else: print "Your entry was not recognized." openPB() openPB()

Read the article

The Changing Face of PASS

- by Bill Graziano

I’m starting my sixth year on the PASS Board. I served two years as the Program Director, two years as the Vice-President of Marketing and I’m starting my second year as the Executive Vice-President of Finance. There’s a pretty good chance that if PASS has done something you don’t like or is doing something you don’t like, that I’m involved in one way or another. Andy Leonard asked in a comment on his blog if the Board had ever reversed itself based on community input. He asserted that it hadn’t. I disagree. I’m not going to try and list all the changes we make inside portfolios based on feedback from and meetings with the community. I’m going to focus on major governance issues since I was elected to the Board. Management Company The first big change was our management company. Our old management company had a standard approach to running a non-profit. It worked well when PASS was launched. Having a ready-made structure and process to run the organization enabled the organization to grow quickly. As time went on we were limited in some of the things we wanted to do. The more involved you were with PASS, the more you saw these limitations. Key volunteers were regularly providing feedback that they wanted certain changes that were difficult for us to accomplish. The Board at that time wanted changes that were difficult or impossible to accomplish under that structure. This was not a simple change. Imagine a $2.5 million dollar company letting all its employees go on a Friday and starting with a new staff on Monday. We also had a very narrow window to accomplish that so that we wouldn’t affect the Summit – our only source of revenue. We spent the year after the change rebuilding processes and putting on the Summit in Denver. That’s a concrete example of a huge change that PASS made to better serve its members. And it was a change that many in the community were telling us we needed to make. Financials We heard regularly from our members that they wanted our financials posted. Today on our web site you can find audited financials going back to 2004. We publish our budget at the start of each year. If you ask a question about the financials on the PASS site I do my best to answer it. I’m also trying to do a better job answering financial questions posted in other locations. (And yes, I know I owe a few of you some blog posts.) That’s another concrete example of a change that our members asked for that the Board agreed was a good decision. Minutes When I started on the Board the meeting minutes were very limited. The minutes from a two day Board meeting might fit on one page. I think we did the bare minimum we were legally required to do. Today Board meeting minutes run from 5 to 12 pages and go into incredible detail on what we talk about. There are certain topics that are NDA but where possible we try to list the topic we discussed but that the actual discussion was under NDA. We also publish the agenda of Board meetings ahead of time. This is another specific example where input from the community influenced the decision. It was certainly easier to have limited minutes but I think the extra effort helps our members understand what’s going on. Board Q&A At the 2009 Summit the Board held its first public Q&A with our members. We’d always been available individually to answer questions. There’s a benefit to getting us all in one room and asking the really hard questions to watch us squirm. We learn what questions we don’t have good answers for. We get to see how many people in the crowd look interested in the various questions and answers. I don’t recall the genesis of how this came about. I’m fairly certain there was some community pressure though. Board Votes Until last November, the Board only reported the vote totals and not how individual Board members voted. That was one of the topics at a great lunch I had with Tim Mitchell and Kendal van Dyke at the Summit. That was also the topic of the first question asked at the Board Q&A by Kendal. Kendal expressed his opposition to to anonymous votes clearly and passionately and without trying to paint anyone into a corner. Less than 24 hours later the PASS Board voted to make individual votes public unless the topic was under NDA. That’s another area where the Board decided to change based on feedback from our members. Summit Location While this isn’t actually a governance issue it is one of the more public decisions we make that has taken some public criticism. There is a significant portion of our members that want the Summit near them. There is a significant portion of our members that like the Summit in Seattle. There is a significant portion of our members that think it should move around the country. I was one that felt strongly that there were significant, tangible benefits to our attendees to being in Seattle every year. I’m also one that has been swayed by some very compelling arguments that we need to have at least one outside Seattle and then revisit the decision. I can’t tell you how the Board will vote but I know the opinion of our members weighs heavily on the decision. Elections And that brings us to the grand-daddy of all governance issues. My thesis for this blog post is that the PASS Board has implemented policy changes in response to member feedback. It isn’t to defend or criticize our election process. It’s just to say that is has been under going continuous change since I’ve been on the Board. I ran for the Board in the fall of 2005. I don’t know much about what happened before then. I was actively volunteering for PASS for four years prior to that as a chapter leader and on the program committee. I don’t recall any complaints about elections but that doesn’t mean they didn’t occur. The questions from the Nominating Committee (NomCom) were trivial and the selection process rudimentary (For example, “Tell us about your accomplishments”). I don’t even remember who I ran against or how many other people ran. I ran for the VP of Marketing in the fall of 2007. I don’t recall any significant changes the Board made in the election process for that election. I think a lot of the changes in 2007 came from us asking the management company to work on the election process. I was expecting a similar set of puff ball questions from my previous election. Boy, was I in for a shock. The NomCom had found a much better set of questions and really made the interview portion difficult. The questions were much more behavioral in nature. I’d already written about my vision for PASS and my goals. They wanted to know how I handled adversity, how I handled criticism, how I handled conflict, how I handled troublesome volunteers, how I motivated people and how I responded to motivation. And many, many other things. They grilled me for over an hour. I’ve done a fair bit of technical sales in my time. I feel I speak well under pressure addressing pointed questions. This interview intentionally put me under pressure. In addition to wanting to know about my interpersonal skills, my work experience, my volunteer experience and my supervisory experience they wanted to see how I’d do under pressure. They wanted to see who would respond under pressure and who wouldn’t. It was a bit of a shock. That was the first big change I remember in the election process. I know there were other improvements around the process but none of them stick in my mind quite like the unexpected hour-long grilling. The next big change I remember was after the 2009 elections. Andy Warren was unhappy with the election process and wanted to make some changes. He worked with Hannes at HQ and they came up with a better set of processes. I think Andy moved PASS in the right direction. Nonetheless, after the 2010 election even more people were very publicly clamoring for changes to our election process. In August of 2010 we had a choice to make. There were numerous bloggers criticizing the Board and our upcoming election. The easy change would be to announce that we were changing the process in a way that would satisfy our critics. I believe that a knee-jerk response to criticism is seldom correct. Instead the Board spent August and September and October and November listening to the community. I visited two SQLSaturdays and asked questions of everyone I could. I attended chapter meetings and asked questions of as many people as they’d let me. At Summit I made it a point to introduce myself to strangers and ask them about the election. At every breakfast I’d sit down at a table full of strangers and ask about the election. I’m happy to say that I left most tables arguing about the election. Most days I managed to get 2 or 3 breakfasts in. I spent less time talking to people that had already written about the election. They were already expressing their opinion. I wanted to talk to people that hadn’t spoken up. I wanted to know what the silent majority thought. The Board all attended the Q&A session where our members expressed their concerns about a variety of issues including the election. The PASS Board also chose to create the Election Review Committee. We wanted people from the community that had been involved with PASS to look at our election process with fresh eyes while listening to what the community had to say and give us some advice on how we could improve the process. I’m a part of this as is Andy Warren. None of the other members are on the Board. I’ve sat in numerous calls and interviews with this group and attended an open meeting at the Summit. We asked anyone that wanted to discuss the election to come speak with us. The ERC held an open meeting at the Summit and invited anyone to attend. There are forums on the ERC web site where we’ve invited people to participate. The ERC has reached to key people involved in recent elections. The years that I haven’t mentioned also saw minor improvements in the election process. Off the top of my head I don’t recall what exact changes were made each year. Specifically since the 2010 election we’ve gone out of our way to seek input from the community about the process. I’m not sure what more we could have done to invite feedback from the community. I think to say that we haven’t “fixed” the election process isn’t a fair criticism at this time. We haven’t rushed any changes through the process. If you don’t see any changes in our election process in July or August then I think it’s fair to criticize us for ignoring the community or ask for an explanation for what we’ve done. In Summary Andy’s main point was that the PASS Board hasn’t changed in response to our members wishes. I think I’ve shown that time and time again the PASS Board has changed in response to what our members want. There are only two outstanding issues: Summit location and elections. The 2013 Summit location hasn’t been decided yet. Our work on the elections is also in progress. And at every step in the election review we’ve gone out of our way to listen to the community and incorporate their feedback on the process. I also hope I’m not encouraging everyone that wants some change in the organization to organize a “blog rush” against the Board. We take public suggestions very seriously but we also take the time to evaluate those suggestions and learn what the rest of our members think and make a measured decision.

Read the article

How to group using XSLT

- by AdRock

I'm having trouble grouping a set of nodes. I've found an article that does work with grouping and i have tested it and it works on a small test stylesheet i have I now need to use it in my stylesheet where I only want to select node sets that have a specific value. What I want to do in my stylesheet is select all users who have a userlevel of 2 then to group them by the volunteer region. What happens at the minute is that it gets the right amount of users with userlevel 2 but doesn't print them. It just repeats the first user in the xml file. <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:key name="volunteers-by-region" match="volunteer" use="region" /> <xsl:template name="hoo" match="/"> <html> <head> <title>Registered Volunteers</title> <link rel="stylesheet" type="text/css" href="volunteer.css" /> </head> <body> <h1>Registered Volunteers</h1> <h3>Ordered by the username ascending</h3> <xsl:for-each select="folktask/member[user/account/userlevel='2']"> <xsl:for-each select="volunteer[count(. | key('volunteers-by-region', region)[1]) = 1]"> <xsl:sort select="region" /> <xsl:for-each select="key('volunteers-by-region', region)"> <xsl:sort select="folktask/member/user/personal/name" /> <div class="userdiv"> <xsl:call-template name="member_userid"> <xsl:with-param name="myid" select="/folktask/member/user/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_volid"> <xsl:with-param name="volid" select="/folktask/member/volunteer/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_role"> <xsl:with-param name="volrole" select="/folktask/member/volunteer/roles" /> </xsl:call-template> <xsl:call-template name="volunteer_region"> <xsl:with-param name="volloc" select="/folktask/member/volunteer/region" /> </xsl:call-template> </div> </xsl:for-each> </xsl:for-each> </xsl:for-each> <xsl:if test="position()=last()"> <div class="count"><h2>Total number of volunteers: <xsl:value-of select="count(/folktask/member/user/account/userlevel[text()=2])"/></h2></div> </xsl:if> </body> </html> </xsl:template> <xsl:template name="member_userid"> <xsl:param name="myid" select="'Not Available'" /> <div class="heading bold"><h2>USER ID: <xsl:value-of select="$myid" /></h2></div> </xsl:template> <xsl:template name="volunteer_volid"> <xsl:param name="volid" select="'Not Available'" /> <div class="heading2 bold"><h2>VOLUNTEER ID: <xsl:value-of select="$volid" /></h2></div> </xsl:template> <xsl:template name="volunteer_role"> <xsl:param name="volrole" select="'Not Available'" /> <div class="small bold">ROLES:</div> <div class="large"> <xsl:choose> <xsl:when test="string-length($volrole)!=0"> <xsl:value-of select="$volrole" /> </xsl:when> <xsl:otherwise> <xsl:text> </xsl:text> </xsl:otherwise> </xsl:choose> </div> </xsl:template> <xsl:template name="volunteer_region"> <xsl:param name="volloc" select="'Not Available'" /> <div class="small bold">REGION:</div> <div class="large"><xsl:value-of select="$volloc" /></div> </xsl:template> </xsl:stylesheet> here is my full xml file <?xml version="1.0" encoding="ISO-8859-1" ?> <?xml-stylesheet type="text/xsl" href="volunteers.xsl"?> <folktask xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="folktask.xsd"> <member> <user id="1"> <personal> <name>Abbie Hunt</name> <sex>Female</sex> <address1>108 Access Road</address1> <address2></address2> <city>Wells</city> <county>Somerset</county> <postcode>BA5 8GH</postcode> <telephone>01528927616</telephone> <mobile>07085252492</mobile> <email>[email protected]</email> </personal> <account> <username>AdRock</username> <password>269eb625e2f0cf6fae9a29434c12a89f</password> <userlevel>4</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="1"> <roles></roles> <region>South West</region> </volunteer> </member> <member> <user id="2"> <personal> <name>Aidan Harris</name> <sex>Male</sex> <address1>103 Aiken Street</address1> <address2></address2> <city>Chichester</city> <county>Sussex</county> <postcode>PO19 4DS</postcode> <telephone>01905149894</telephone> <mobile>07784467941</mobile> <email>[email protected]</email> </personal> <account> <username>AmbientExpert</username> <password>8e64214160e9dd14ae2a6d9f700004a6</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="2"> <roles>Van Driver,gas Fitter</roles> <region>South Central</region> </volunteer> </member> <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="3"> <roles>Scaffold Erector</roles> <region>South West</region> </volunteer> </member> <member> <user id="4"> <personal> <name>Connor Lawson</name> <sex>Male</sex> <address1>12 Ash Way</address1> <address2></address2> <city>Swindon</city> <county>Wiltshire</county> <postcode>SN3 6GS</postcode> <telephone>01791928119</telephone> <mobile>07338695664</mobile> <email>[email protected]</email> </personal> <account> <username>iTuneStinker</username> <password>3a1f5fda21a07bfff20c41272bae7192</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="1"> <event> <eventname>Oxford Folk Festival</eventname> <url>http://www.oxfordfolkfestival.com/</url> <datefrom>2010-04-07</datefrom> <dateto>2010-04-09</dateto> <location>Oxford</location> <eventpostcode>OX1 9BE</eventpostcode> <additional>Oxford Folk Festival is going into it's third year in 2006. As well as needing volunteers to steward for the event on the weekend itself, we would be delighted to hear from people willing to help in year round festival work such as stuffing envelopes for mailings, poster and leaflet distribution, and stewarding duties at festival pre-events.</additional> <coords> <lat>51.735640</lat> <lng>-1.276136</lng> </coords> </event> <contact> <conname>Stuart Vincent</conname> <conaddress1>P.O. Box 642</conaddress1> <conaddress2></conaddress2> <concity>Oxford</concity> <concounty>Bedfordshire</concounty> <conpostcode>OX1 3BY</conpostcode> <contelephone>01865 79073</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="5"> <personal> <name>Lewis King</name> <sex>Male</sex> <address1>67 Arbors Way</address1> <address2></address2> <city>Sherborne</city> <county>Dorset</county> <postcode>DT9 0GS</postcode> <telephone>01446139701</telephone> <mobile>07292614033</mobile> <email>[email protected]</email> </personal> <account> <username>Runninglife</username> <password>98fab0a27c34ddb2b0618bc184d4331d</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="4"> <roles>Van Driver</roles> <region>South West</region> </volunteer> </member> <member> <user id="6"> <personal> <name>Cameron Lee</name> <sex>Male</sex> <address1>77 Arrington Road</address1> <address2></address2> <city>Solihull</city> <county>Warwickshire</county> <postcode>B90 6FG</postcode> <telephone>01435158624</telephone> <mobile>07789503179</mobile> <email>[email protected]</email> </personal> <account> <username>love2Mixer</username> <password>1df752d54876928639cea07ce036a9c0</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="5"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="7"> <personal> <name>Lexie Dean</name> <sex>Female</sex> <address1>38 Bloomfield Court</address1> <address2></address2> <city>Windermere</city> <county>Westmorland</county> <postcode>LA23 8BM</postcode> <telephone>01781207188</telephone> <mobile>07127461231</mobile> <email>[email protected]</email> </personal> <account> <username>MailNetworker</username> <password>0e070701839e612bf46af4421db4f44b</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="2"> <event> <eventname>Middlewich Folk And Boat Festival</eventname> <url>http://midfest.org.uk/mfab/</url> <datefrom>2010-06-16</datefrom> <dateto>2010-06-18</dateto> <location>Middlewich</location> <eventpostcode>CW10 9BX</eventpostcode> <additional>We welcome stewards staying on campsite or boats.</additional> <coords> <lat>53.190562</lat> <lng>-2.444926</lng> </coords> </event> <contact> <conname>Festival Committee</conname> <conaddress1>PO Box 141</conaddress1> <conaddress2></conaddress2> <concity>Winsford</concity> <concounty>Cheshire</concounty> <conpostcode>CW10 9WB</conpostcode> <contelephone>07092 39050</contelephone> <conmobile>07092 39050</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="8"> <personal> <name>Liam Chapman</name> <sex>Male</sex> <address1>99 Black Water Drive</address1> <address2></address2> <city>St.Austell</city> <county>Cornwall</county> <postcode>PL25 3GF</postcode> <telephone>01835629418</telephone> <mobile>07695179069</mobile> <email>[email protected]</email> </personal> <account> <username>GreenWimp</username> <password>1fe3df99a841dc4f723d21af89e0990f</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="9"> <personal> <name>Brandon Harrison</name> <sex>Male</sex> <address1>41 Arlington Way</address1> <address2></address2> <city>Dorchester</city> <county>Dorset</county> <postcode>DT1 3JS</postcode> <telephone>01293626735</telephone> <mobile>07277145760</mobile> <email>[email protected]</email> </personal> <account> <username>LovelyStar</username> <password>8b53b66f323aa5e6a083edb4fd44456b</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="10"> <personal> <name>Samuel Young</name> <sex>Male</sex> <address1>102 Bailey Hill Road</address1> <address2></address2> <city>Wolverhampton</city> <county>Staffordshire</county> <postcode>WV7 8HS</postcode> <telephone>01594531382</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>GuruSassy</username> <password>00da02da6c143c3d136bf60b8bfcf43e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="6"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="11"> <personal> <name>Alexander Harris</name> <sex>Male</sex> <address1>93 Beguine Drive</address1> <address2></address2> <city>Winchester</city> <county>Hampshire</county> <postcode>S23 2FD</postcode> <telephone>01452496582</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>GuitarExpert</username> <password>0102ad3740028e155925e9918ead3bde</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="7"> <roles>Scaffold Erector</roles> <region>North East</region> </volunteer> </member> <member> <user id="12"> <personal> <name>Tyler Mcdonald</name> <sex>Male</sex> <address1>44 Baker Road</address1> <address2></address2> <city>Bromley</city> <county>Kent</county> <postcode>BR1 2GD</postcode> <telephone>01918704546</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>WildWish</username> <password>073220bb5e9a12ad202bb7d94dcc86f7</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="13"> <personal> <name>Skye Mason</name> <sex>Female</sex> <address1>56 Cedar Creek Church Road</address1> <address2></address2> <city>Bracknell</city> <county>Berkshire</county> <postcode>RG12 1AQ</postcode> <telephone>01787607618</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>PizzaDork</username> <password>74c54937ee7051ee7f4ebc11296ed531</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="14"> <personal> <name>Maryam Rose</name> <sex>Female</sex> <address1>98 Baptist Circle</address1> <address2></address2> <city>Newbury</city> <county>Berkshire</county> <postcode>RG14 8DF</postcode> <telephone>01691317999</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>SexTech</username> <password>f1c21f9f1e999da97d7dc460bb876fcf</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="3"> <event> <eventname>Birdsedge Village Festival</eventname> <url>http://www.birdsedge.co.uk/</url> <datefrom>2010-07-08</datefrom> <dateto>2010-07-09</dateto> <location>Birdsedge</location> <eventpostcode>HD8 8XT</eventpostcode> <additional></additional> <coords> <lat>53.565644</lat> <lng>-1.696196</lng> </coords> </event> <contact> <conname>Jacey Bedford</conname> <conaddress1>Penistone Road</conaddress1> <conaddress2>Birdsedge</conaddress2> <concity>Huddersfield</concity> <concounty>West Yorkshire</concounty> <conpostcode>HD8 8XT</conpostcode> <contelephone>01484 60623</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="15"> <personal> <name>Lexie Rogers</name> <sex>Female</sex> <address1>38 Bishop Road</address1> <address2></address2> <city>Matlock</city> <county>Derbyshire</county> <postcode>DE4 1BX</postcode> <telephone>01961168823</telephone> <mobile>07170855351</mobile> <email>[email protected]</email> </personal> <account> <username>ShipBurglar</username> <password>cc190488a95667cb117e20bc6c7c330e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="8"> <roles>Gas Fitter</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="16"> <personal> <name>Noah Parker</name> <sex>Male</sex> <address1>112 Canty Road</address1> <address2></address2> <city>Keswick</city> <county>Cumberland</county> <postcode>CA12 4TR</postcode> <telephone>01931272522</telephone> <mobile>07610026576</mobile> <email>[email protected]</email> </personal> <account> <username>AwsomeMoon</username> <password>50b770539bdf08543f15778fc7a6f188</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="9"> <roles>Van Driver</roles> <region>North West</region> </volunteer> </member> <member> <user id="17"> <personal> <name>Elliot Mitchell</name> <sex>Male</sex> <address1>102 Brown Loop</address1> <address2></address2> <city>Grimsby</city> <county>Lincolnshire</county> <postcode>OX16 4QP</postcode> <telephone>01212971319</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>msBasher</username> <password>c38fad85badcdff6e3559ef38656305d</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="18"> <personal> <name>Scarlett Rose</name> <sex>Female</sex> <address1>93 Cedar Lane</address1> <address2></address2> <city>Stourbridge</city> <county>Warminster</county> <postcode>DY8 4NX</postcode> <telephone>01537477435</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>MakeupWimp</username> <password>16a9b7910fc34304c1d1a6a1b0c31502</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="19"> <personal> <name>Katie Butler</name> <sex>Female</sex> <address1>44 Boulder Crest Road</address1> <address2></address2> <city>Bungay</city> <county>Suffolk</county> <postcode>NR35 1LT</postcode> <telephone>01419124094</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>TomatoCrunch</username> <password>d7eba53443ec4ddcee69ed71b2023fc0</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="20"> <personal> <name>Jayden Richards</name> <sex>Male</sex> <address1>56 Corson Trail</address1> <address2></address2> <city>Sandy</city> <county>Bedfordshire</county> <postcode>SG19 6DF</postcode> <telephone>01882134438</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>nightmareTwig</username> <password>8a9c08c7b6473493e8a5da15dd541025</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="4"> <event> <eventname>East Barnet Festival</eventname> <url>http://www.eastbarnetfestival.org.uk</url> <datefrom>2010-07-01</datefrom> <dateto>2010-07-03</dateto> <location>East Barnet</location> <eventpostcode>EN4 8TB</eventpostcode> <additional></additional> <coords> <lat>51.641556</lat> <lng>-0.163018</lng> </coords> </event> <contact> <conname>East Barnet Festival Commitee</conname> <conaddress1>Oak Hill Park</conaddress1> <conaddress2>Church Hill Road</conaddress2> <concity>East Barnet</concity> <concounty>Hertfordshire</concounty> <conpostcode>EN4 8TB</conpostcode> <contelephone>07071781745</contelephone> <conmobile>07071781745</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="21"> <personal> <name>Abbie Jackson</name> <sex>Female</sex> <address1>98 Briarwood Lane</address1> <address2></address2> <city>Weymouth</city> <county>Dorset</county> <postcode>DT3 6TS</postcode> <telephone>01575629969</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>CrazyBlockhead</username> <password>4ce56fb13d043be605037ace4fbd9fa5</password> <userlevel>2</u

Search Results

Search found 148 results on 6 pages for 'mitchell skurnik'.

Page 6/6 | < Previous Page | 2 3 4 5 6

- by JoshReuben

- by David Dorf

- by Madhan ayyasamy

- by Testas

- by csmith18119

- by Ivo Danihelka

- by mandelart

- by Michael Snow

- by ScottGu

- by Michael Snow

- by amaniar

- by Kellsey Ruppel

- by ScottGu

- by John Smith

- by Andrew Clarke

- by Elena Zannoni

- by Pinal Dave

- by Roman Schindlauer

- by Pinal Dave

- by IDOntWantThat

- by Bill Graziano

- by AdRock

< Previous Page | 2 3 4 5 6