Search Results

Search found 207 results on 9 pages for 'ntp'.

Page 6/9 | < Previous Page | 2 3 4 5 6 7 8 9  | Next Page >

• Which local process is connected to given server on given port?

  - by depesz

  On Linux, I can simply: netstat -ntp | grep server_ip:port And I get PID and process name of the program that is making given connection. But how do I do it on Solaris?

  Read the article

• shell script to set time and date on ubuntu

  - by glapo

  my desktop CMOS battery is not working, therefore I have to set time and date each time my computer starts up. I want to create a shell script to automate the setting of date and time on my computer after each boot is complete. options that exist include: 1. buying a CMOS battery :- am considering this, but for the meantime a shell script will do. 2. using NTP to synchronize time and date with internet servers :- am not connected to the internet.

  Read the article

• Post Deploy MAAS cleanup

  - by David Buttrick

  I have a mostly working MAAS cluster. I'm still learning juju, but while I'm doing that, I wanted to take this opportunity to do some clean-up tasks. Here are my goals: Configure ntp on the nodes. Set the video mode on the nodes. Set the timezone on the nodes. Are these juju tasks? Or is this better attacked by mounting the disk image on the MAAS host, and doing the configuration there? If I do it that way, how do I get the nodes to recognize that they have to re-install the image to pickup my changes? Thank you. David

  Read the article

• Unable to add host running ubuntu for nagios monitoring?

  - by karthick87

  I am unable to add ubuntu server in nagios monitoring. I am getting "CHECK_NRPE: Socket timeout after 40 seconds." error for few services "CPU Load, Cron File Check, Current Users, Disk Check, NTP Daemon, Time Check, Total Processes, Zombie Processes". Please find the snapshot for the same below, Details: Installed nrpe plugin in ubuntu host. On running the below command from remote host running ubuntu (not nagios server) am getting the following output, root@ubuntu-cacher:~# /usr/local/nagios/libexec/check_nrpe -H localhost NRPE v2.13 But in nagios server i am getting "CHECK_NRPE: Socket timeout after 40 seconds." error. Additional Information: Am running nrpe under xinetd, when i execute the following command i dont get any output, root@ubuntu-cacher:~# netstat -at | grep nrpe But getting the following output when checking, root@ubuntu-cacher:~# netstat -ant|grep 5666 tcp 0 0 0.0.0.0:5666 0.0.0.0:* LISTEN tcp 0 0 172.29.*.*:5666 172.29.*.*:33693 ESTABLISHED tcp 0 0 172.29.*.*:5666 172.29.*.*:33692 ESTABLISHED

  Read the article

• Ubuntu 12.04 "Shutdown" or "Restart" logs out

  - by jenls

  While logged in as a sudo user, click the right top power icon, then select and click "Shutdown" menu, it comes up with a dialog asking if I want to close all programs. The dialog has two options: restart or shutdown. Choose either one logs me out. Syslog has the following line about restart: WARNING: Unable to restart system: Authorization is required This happened after I installed NTP and some OpenStack packages while working in a prototype project. My Ubuntu's software is up to date as of this writing. Anyone encountered the same problem in 12.04?

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Equivalent to GetTickCount() on Linux

  - by Matt Joiner

  I'm looking for an equivalent to GetTickCount() on Linux. Presently I am using Python's time.time() which presumably calls through to gettimeofday(). My concern is that the time returned (the unix epoch), may change erratically if the clock is messed with, such as by NTP. A simple process or system wall time, that only increases positively at a constant rate would suffice. Does any such time function in C or Python exist?

  Read the article

• cscript - Invalid procedure call or argument when running a vbs file

  - by quanta

  I've been trying to use check_time.vbs to check the Windows time. Here's the script: http://pastebin.com/NfUrCAqU The help message could be display: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs /? check_time.vbs V1.01 Usage: cscript /NoLogo check_time.vbs serverlist warn crit [biggest] Options: serverlist (required): one or more server names, coma-separated warn (required): warning offset in seconds, can be partial crit (required): critical offset in seconds, can be partial biggest (optional): if multiple servers, else use default least offset Example: cscript /NoLogo check_time.vbs myserver1,myserver2 0.4 5 biggest But I get the following error when running: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs 0.asia.pool.ntp.org 20 50 C:\Program Files\NSClient++\scripts\check_time.vbs(53, 1) Microsoft VBScript run time error: Invalid procedure call or argument The screenshot: Manually execute w32tm still works fine: What might be the cause of this?

  Read the article

• opening socket to google hangs on SYN_SENT

  - by puchu

  I have 2 computers now: downloader (asus at4nm10t-i) with debian and desktop (asus sabertooth 990fx) with gentoo in the same network under NAT even with the same ethernet card: RTL8111E. driver r8169 is compiled as module on both computers. Sometimes in evenings desktop cannot connect to google and all its services like now: curl -v http://www.google.by on downloader it received server's answer immediately. on desktop it hanged and when I ran in other terminal: netstat -ntp | grep curl >>tcp 0 1 192.168.0.7:54126 173.194.35.191:80 SYN_SENT 4876/curl after 1-2 minutes it received server's answer. I was tried to change ip of network, mac address of desktop but nothing changed. When I was trying to connect to another services except google: curl -v http://www.yahoo.com both computers received answers immediately! Only when I rebooted desktop it begins to work with google services correctly I cant understand what is this bug related to. In which bugtracker should I post this: r8169 or linux kernel or google? PS. Desktop was checked with memtest: 5 passes - no errors

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• firehol (firewall) with bridge: how to filter

  - by Leon

  I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

  Read the article

• configure time sync for azure VMs

  - by Pharao2k

  I have several ExtraSmall-sized Azure VMs (PaaS / Cloud Service based) that are all experiencing drifting of the Windows clock. Research showed that this is quite common, especially in VMs with shared cores. Unfortunately even after configuring the w32time service to sync with time.windows.com and forcing a resync (w32tm /resync), there seems to be a time difference of 2 seconds to the configured NTP server. Though Microsoft states that w32tm is not meant as a high-precision sync tool, a difference of 2 seconds is (IMO) quite a lot for server-activities/processing. What does one have to do to get more accurate time sync?

  Read the article

• Give root password for maintenance

  - by Jevgeni Smirnov

  After entering shutdown now in terminal I get everything running normally and then: All processes ended withing 2 seconds...done INIT: Going single user INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal Give root password for maintenance(or.... I press Ctrl+D, and it shows me login screen Debian. Shutdown through GUI works properly. UPDATE 1 It seems some process hangs. Moreover I'v managed to poweroff server through several retries. Recently i'v installed only ntp and ntpdate. Nothing more. I suppose it might be it conflicting with iptables.

  Read the article

• AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

  - by Niro

  I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

  Read the article

• System time wrong after running ntpdate because DST ignored

  - by Ian Dunn

  When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

  Read the article

• Gnome 3 - Unable to change date and time

  - by Chris Harris

  I am running Arch Linux with Gnome 3. Unfortunately, although my time and date settings in /etc/rc.conf show that HARDWARECLOCK='UTC' and TIMEZONE='America/LosAngeles'. I continue to get the timezone of Europe/London. If I try to change the date and time via the GUI. It requires root access. After authorizing root access, the date and time may be changed; however, after closing the GUI window, it automatically reverts back to the previous incorrect timezone. I am able to use pool.ntp.org in order to sync my time to the correct one; however, this works only for the current session and is not fixed. This solution is inconvenient since there is not always network access. What other solutions are available for this problem?

  Read the article

• Hourly CRON task running more frequently than one hour

  - by Justin

  I have a cron task that calls a special PHP script via wget. Here is the crontab entry: 0 * * * * wget http://www.... It will work perfect for several days, running on the hour. However, after a few days the cron job will start to be called several times an hour. I have never seen CRON drift like this, so I imagine it can't really be a CRON issue. However, the logs of the script that is called clearly show it running several times an hour. Server details: Ubuntu Luci Apache MySQL PHP5 Time is showing correct @ command line Server is setup to sync with a NTP server In order for the script to run it must be passed a unique 50-character hash key in the URL, so this script isn't being called from any other source accidentally. What might cause CRON to drift like this?

  Read the article

• free -m output, should I be concerend about this servers low memory?

  - by Michael

  This is the output of free -m on a production database (MySQL with machine. 83MB looks pretty bad, but I assume the buffer/cache will be used instead of Swap? [admin@db1 www]$ free -m total used free shared buffers cached Mem: 16053 15970 83 0 122 5343 -/+ buffers/cache: 10504 5549 Swap: 2047 0 2047 top ouptut sorted by memory: top - 10:51:35 up 140 days, 7:58, 1 user, load average: 2.01, 1.47, 1.23 Tasks: 129 total, 1 running, 128 sleeping, 0 stopped, 0 zombie Cpu(s): 6.5%us, 1.2%sy, 0.0%ni, 60.2%id, 31.5%wa, 0.2%hi, 0.5%si, 0.0%st Mem: 16439060k total, 16353940k used, 85120k free, 122056k buffers Swap: 2096472k total, 104k used, 2096368k free, 5461160k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 20757 mysql 15 0 10.2g 9.7g 5440 S 29.0 61.6 28588:24 mysqld 16610 root 15 0 184m 18m 4340 S 0.0 0.1 0:32.89 sysshepd 9394 root 15 0 154m 8336 4244 S 0.0 0.1 0:12.20 snmpd 17481 ntp 15 0 23416 5044 3916 S 0.0 0.0 0:02.32 ntpd 2000 root 5 -10 12652 4464 3184 S 0.0 0.0 0:00.00 iscsid 8768 root 15 0 90164 3376 2644 S 0.0 0.0 0:00.01 sshd

  Read the article

• Config deployment on multiple servers.

  - by user66601

  I have multiple servers in WEB cluster (identical configuration for all of them, despite the IP) How do you deploy changes in configs on multile servers? I make the new config, then create config per every server (placing correct IP), and next: upload them on every server, replacing old ones (rsync over ssh) set on every server a job which reloads webserver at the same time (servers use ntp). - this done by issuing commands by script (to save time for logging in) before adding a job for server reload - there's checksum test of the config on the server) - an a notification in case of fail How do you see such method? What should be the "professional way :) ? (I don't say my way doesn't work... it works and saves my time not used for logging on every webserver.) Regards,

  Read the article

• Is it safe to change the time on hosting VM server?

  - by hydroparadise

  So, I noticed there's about a 10 minute drift on my VM hosting server from what time it's supposed to be. In traditional environments, I would just restart the system (and change the BIOS time if necassary). The hosting server is Ubuntu 12.04. Undertsanding that some process could be time sensitive (NTP?), I was wondering how this might affect the relation between the host and hosted system (currently hosting 4: 3 Ubuntu 12.04 servers with one being a web server, and 1 Windows Server 2008 file server). I am using Virtual Box 4 with it's headless option. Ultimately, I am trying to avoid from shutting down the host (which ultimately mean shutthing down the other hosted systems). Is this safe?

  Read the article

• Stop Ubuntu From Automatically Updating the Time

  - by Yar

  I just need to set the date temporarily. I run this date 051918002010.00 and it sticks for just 5 seconds or so. Then it syncs with the time server. I have tried: ps aux | grep ntp but there is nothing there. I need a correct answer now, more than a more detailed answer later :) Edit: As answerers quickly discovered, my Ubuntu is running in a VirtualBox, which turned out to be relevant for some versions of the answer. Thanks to everybody.

  Read the article

• Windows services not starting automatically?

  - by Jeff Atwood

  We've had some nasty time sync problems on our Windows Server 2008 R2 servers lately. I traced this back to something very simple: the Windows Time Service was not started! The time can't possibly sync via NTP when the time service isn't running... The Windows Time Service was set to start "automatically" in the services control panel, which I double and triple checked. I also checked the event logs and I didn't see any service failures or anything like that. In fact, it looked a heck of a lot like the Windows Time Service never started up automatically after the weekly Windows Updates were installed and the servers were rebooted. (this is set to happen every Saturday at 7 PM.) The minute I started the Time Service, the time synced fine. So, then, the question: why would a service set to start "Automatically" ... not be started automatically? That seems sort of crazy to me.

  Read the article

• sticky bit on NFS file system

  - by Kris_R

  I have a system where to the main server (homes, nfs, ntp, queue...) can log-in only root – all the other users use front-end host with NFS-mounted home directories (RW) and all other software directories (read-only). My problem is, that time to time, if root or normal user with sudo makes some administrative works on front-end some homes of normal users getting sticky bits (drwsr-sr-x). If it happens usually the user can't log-in (as long as permission for his home are not changed to drwxr-xr-x). The last time I saw it after compiling some new software (normal user configure;make) and installation from the same directory as root (su and make install or direct as normal user sudo make install). Can somebody explain me why it happens and what should I do to get rid of this problem? p.s. I'm using CentOS 5.7

  Read the article

• Too Many ESTABLISHED connection from a single IP address in Apache

  - by ananthan

  netstat -ntp |grep 80 shows too many ESTABLISHED connection from single IP address. Around 300 of them and it is not an attack and user is using a 2G connection to access Apache. This is the case with other 2G connections also. As a result of this Apache is running out of children. Earlier it was showing too many close_wait and after enabling tcp_tw_reuse and tcp_tw-recycle there is not much close_wait but the number of ESTABLISHED connections increased. We are using Ubuntu 11.04 having 48 GB ram keepalive On keepalive timeout 10 max clients 800 max-request-perchild 4000 timeout 300 I have set syn_ack to 1 and syn_retries to 2. On wifi there is no such issue. Connections are closing properly, but with 2G connections Apache is running out of children and too many ESTABLISHED connection. also i have tried setting timeout from default 300 to 30,but since our project is image hosting for mobile phones,clients couldn't upload images properly as they are getting frequent time out.Also there were a lot of 408 messages so changed it to the default 300

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9  | Next Page >