Search Results

Search found 48672 results on 1947 pages for 'post build event'.

Page 6/1947 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• 'pip install carbon' looks like it works, but pip disagrees afterward

  - by fennec

  I'm trying to use pip to install the package carbon, a package related to statistics collection. When I run pip install carbon, it looks like everything works. However, pip is unconvinced that the package is actually installed. (This ultimately causes trouble because I'm using Puppet, and have a rule to install carbon using pip, and when puppet asks pip "is this package installed?" it says "no" and it reinstalls it again.) How do I figure out what's preventing pip from recognizing the success of this installation? Here is the output of the regular install: root@statsd:/opt/graphite# pip install carbon Downloading/unpacking carbon Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 Successfully installed carbon Cleaning up... root@statsd:/opt/graphite# pip freeze | grep carbon root@statsd: Here is the verbose version of the install: root@statsd:/opt/graphite# pip install carbon -v Downloading/unpacking carbon Using version 0.9.9 (newest of versions: 0.9.9, 0.9.9, 0.9.8, 0.9.7, 0.9.6, 0.9.5) Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon running egg_info creating pip-egg-info/carbon.egg-info writing requirements to pip-egg-info/carbon.egg-info/requires.txt writing pip-egg-info/carbon.egg-info/PKG-INFO writing top-level names to pip-egg-info/carbon.egg-info/top_level.txt writing dependency_links to pip-egg-info/carbon.egg-info/dependency_links.txt writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) reading manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon running install running build running build_py creating build creating build/lib.linux-i686-2.7 creating build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_publisher.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/manhole.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/instrumentation.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/cache.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/management.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/relayrules.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/events.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/protocols.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/conf.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/rewrite.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/hashing.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/writer.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/client.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/util.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/service.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_listener.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/routers.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/storage.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/log.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/__init__.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/state.py -> build/lib.linux-i686-2.7/carbon creating build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/receiver.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/rules.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/buffers.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/__init__.py -> build/lib.linux-i686-2.7/carbon/aggregator package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) creating build/lib.linux-i686-2.7/twisted creating build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_relay_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_aggregator_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_cache_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/carbon/amqp0-8.xml -> build/lib.linux-i686-2.7/carbon running build_scripts creating build/scripts-2.7 copying and adjusting bin/validate-storage-schemas.py -> build/scripts-2.7 copying and adjusting bin/carbon-aggregator.py -> build/scripts-2.7 copying and adjusting bin/carbon-cache.py -> build/scripts-2.7 copying and adjusting bin/carbon-relay.py -> build/scripts-2.7 copying and adjusting bin/carbon-client.py -> build/scripts-2.7 changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 running install_lib copying build/lib.linux-i686-2.7/carbon/amqp_publisher.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/manhole.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp0-8.xml -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/instrumentation.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/cache.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/management.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/relayrules.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/events.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/protocols.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/conf.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/rewrite.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/hashing.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/writer.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/client.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/util.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/aggregator/receiver.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/rules.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/buffers.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/__init__.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/service.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp_listener.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/routers.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/storage.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/log.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/__init__.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/state.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/twisted/plugins/carbon_relay_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_aggregator_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_cache_plugin.py -> /opt/graphite/lib/twisted/plugins byte-compiling /opt/graphite/lib/carbon/amqp_publisher.py to amqp_publisher.pyc byte-compiling /opt/graphite/lib/carbon/manhole.py to manhole.pyc byte-compiling /opt/graphite/lib/carbon/instrumentation.py to instrumentation.pyc byte-compiling /opt/graphite/lib/carbon/cache.py to cache.pyc byte-compiling /opt/graphite/lib/carbon/management.py to management.pyc byte-compiling /opt/graphite/lib/carbon/relayrules.py to relayrules.pyc byte-compiling /opt/graphite/lib/carbon/events.py to events.pyc byte-compiling /opt/graphite/lib/carbon/protocols.py to protocols.pyc byte-compiling /opt/graphite/lib/carbon/conf.py to conf.pyc byte-compiling /opt/graphite/lib/carbon/rewrite.py to rewrite.pyc byte-compiling /opt/graphite/lib/carbon/hashing.py to hashing.pyc byte-compiling /opt/graphite/lib/carbon/writer.py to writer.pyc byte-compiling /opt/graphite/lib/carbon/client.py to client.pyc byte-compiling /opt/graphite/lib/carbon/util.py to util.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/receiver.py to receiver.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/rules.py to rules.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/buffers.py to buffers.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/service.py to service.pyc byte-compiling /opt/graphite/lib/carbon/amqp_listener.py to amqp_listener.pyc byte-compiling /opt/graphite/lib/carbon/routers.py to routers.pyc byte-compiling /opt/graphite/lib/carbon/storage.py to storage.pyc byte-compiling /opt/graphite/lib/carbon/log.py to log.pyc byte-compiling /opt/graphite/lib/carbon/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/state.py to state.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_relay_plugin.py to carbon_relay_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_aggregator_plugin.py to carbon_aggregator_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_cache_plugin.py to carbon_cache_plugin.pyc running install_data copying conf/storage-schemas.conf.example -> /opt/graphite/conf copying conf/rewrite-rules.conf.example -> /opt/graphite/conf copying conf/relay-rules.conf.example -> /opt/graphite/conf copying conf/carbon.amqp.conf.example -> /opt/graphite/conf copying conf/aggregation-rules.conf.example -> /opt/graphite/conf copying conf/carbon.conf.example -> /opt/graphite/conf running install_egg_info running egg_info creating lib/carbon.egg-info writing requirements to lib/carbon.egg-info/requires.txt writing lib/carbon.egg-info/PKG-INFO writing top-level names to lib/carbon.egg-info/top_level.txt writing dependency_links to lib/carbon.egg-info/dependency_links.txt writing manifest file 'lib/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found reading manifest file 'lib/carbon.egg-info/SOURCES.txt' writing manifest file 'lib/carbon.egg-info/SOURCES.txt' removing '/opt/graphite/lib/carbon-0.9.9-py2.7.egg-info' (and everything under it) Copying lib/carbon.egg-info to /opt/graphite/lib/carbon-0.9.9-py2.7.egg-info running install_scripts copying build/scripts-2.7/validate-storage-schemas.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-aggregator.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-cache.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-relay.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-client.py -> /opt/graphite/bin changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 writing list of installed files to '/tmp/pip-9LuJTF-record/install-record.txt' Successfully installed carbon Cleaning up... Removing temporary dir /opt/graphite/build... root@statsd:/opt/graphite# For reference, this is pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7)

  Read the article

• jQuery plugin for Event Driven Architecture?

  - by leeand00

  Are there any Event Driven Architecture jQuery plugins? Step 1: Subscribing The subscribers subscribe to the event handler in the middle, and pass in a callback method, as well as the name of the event they are listening for... i.e. The two green subscribers will be listening for p0 events. And the blue subscriber will be listening for p1 events. Step 2: The p0 event is fired by another component to the Event Handler A p0 event is fired to the Event Handler The event handler notifies it's subscribers of the event, calling the callback methods they specified when they subscribed in Step 1: Subscribing. Note that the blue subscriber is not notified because it was not listening for p0 events. Step 3: The p1 event is fired a component to the Event Handler The p1 event is fired by another component Just as before except that now the blue subscriber receives the event through its callback and the other two green subscribers do not receive the event. Images by leeand00, on Flickr I can't seem to find one, but my guess is that they just call it something else in Javascript/jquery Also is there a name for this pattern? Because it isn't just a basic publisher/subscriber, it has to be called something else I would think.

  Read the article

• How to get Unique Log on & Log off event in windows

  - by Pragnesh

  I want to get unique logon & log off event from my pc. In the event viewer i can see more then one entry for login & log out event. I check most of the event details but could not found unique event for logged in by user. http://www.freeimagehosting.net/uploads/bf1f69599d.gif

  Read the article

• Is it still cheaper to build your own PC?

  - by Jeff Yates

  With many companies offering build-to-order PCs, where they can source components at bulk purchase prices, is there any value in building your own PC. Is it still a good option for everyone or is it only cost-effective for those building fringe equipment like high spec gaming platforms? Don't forget to factor in the time and effort you spend building and configuring the machine. I know that it is often worthwhile as it builds understanding of your machine, gets you exactly what you want, etc., but is it still good for your wallet or would you be better off paying someone else to do it and spend more time doing something else?

  Read the article

• Triggering custom events in AJAX callbacks

  - by Sabrina Gelbart

  I'm pretty new to JavaScript, but one of the things that's been frustrating is that our AJAX callbacks have been getting packed with different functionality, making it difficult to keep everything separated and organized. I'm really new to programming, I have a feeling learning MVC a bit more would help me, but for now using custom events seems like it could help me keep my code a lot cleaner and prevent some problems. Here's what I'm talking about: function myAjaxFunction(){ $.post('ajax/test.html', function(data) { $(document).trigger('testDataLoaded',data); }); } function myOtherFunctionThatsDependentUponAjax(){ $(document).one('testDataLoaded', function(data){ alert (data); } } I also don't know if it's ok that I'm triggering document or not... Are there any patterns that look like this that I can read more about? What are the potential problems with this?

  Read the article

• Too much memory consumed during TFS automated build

  - by Bernard Chen

  We're running TFS 2010 Standard Edition, and we've set up an automated build to run whenever someone checks in code. We run through all of the automated tests (built with MSTest) as part of the build. We've configured the build to run the tests as a 64-bit process, but the QTAgent.exe that runs the tests grows in memory while the tests are running. It is currently reaching 8GB for the ~650 tests we have, and the process has slowed significantly when we went from 450 tests to 650 tests. When we run all of the tests in the local development environment, memory seems to be freed at least with each TestClass and never exceeds a certain level. The process of running all tests has not increased significantly in the local development environment. Is there a way to configure the build service to free up memory with each Test or each TestClass? With the way things are currently running, the build process gets very slow when we start to run out of memory on the machine. Edit: I found the MSTest invocation in the build log and ran it manually and saw the same behavior of runaway memory. I removed the /publish, /publishbuild, /teamproject, /platform, and /flavor parameters from the invocation of MSTest, in case the test runner was holding onto results until the end, but the behavior didn't change. I ran the same command line on a dev box, separate from the build server, and the memory freed up frequently. It seems there must be something wrong/different about the build server that is causing it to behave different, but I'm stumped where to look. I've looked at qtagent.exe.config, mstest.exe.config, versions of both executables. What else might affect this?

  Read the article

• window.event !== window.event in IE

  - by iacnats

  Code: <html> <head> <script type="text/javascript"> onload = function(){ document.getElementById('btn1').onclick = function(){ if (window === window) alert('window === window') else alert('window !== window'); if (window.event === window.event) alert('window.event === window.event') else alert('window.event !== window.event' ); } } </script> </head> <body> <button id="btn1" >click</button> </body> </html> Result: IE(i have tested IE6 - IE8) says: window === window window.event !== window.event All other browsers say: window === window window.event === window.event What's the reason for IE's response? Thanks.

  Read the article

• Building InstallShield based Installers using Team Build 2010

  - by jehan

  Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

  Read the article

• Event system architecture for networking when performance is concerned

  - by Vandell

  How should I design a system for an action game (think in Golden Axe) where events can happen remotely? I'm using TCP for this because the client is in flash. There's so many options, I can make a binary protocol (I don't like this idea, I found it to be too hard to mantain) but I was also thinking that passing jsons through clients and server can be slow (Is that a exaggerated concern?). What about the internal architecture for the server? And for the client? I'm really lost, If it's a question that is too big, please indicate me some material so I can formulate a better question next time.

  Read the article

• Run script when POST data is sent to Apache

  - by Nathan Adams

  Among my several years of running servers there seems to be a pattern with most spam activity. My question/idea is that is there a way to tell Apache to run a script when POST data is detected? What I would want to do is perform a reverse DNS lookup on the client's IP address, and then perform a DNS lookup on the hostname in the PTR record. Afterwards, perform some checks, excuse the pseudo-code: if PTR does not exist: deny POST request if IP of PTR hostname = client's IP Allow POST request else deny POST request Though I don't care about GET requests, even though they can be just as malicious, this idea is targeted towards spam comments which use POST data to send the comment data to the web server. In order to make sure there isn't much of a time delay, I would run my own recursive DNS server. Please do note, this isn't meant to be a sliver bullet to spam, but it should decrease the volume. Possible or impossible?

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• How to not increment the build.number in Ant?

  - by dacracot

  I have many targets in my build.xml for Ant. Generally I am running two via a shell script, one to construct the application and one for cleaning up. The shell script checks the exit status of the construction to see if it should clean up or leave the clutter behind so I can determine what went wrong and fix it. So went all is going well, the majority of the time, Ant is executed once for construction and once for clean up. This results in my build.number being incremented for each execution. So in steady state, my build.number increments by 2. How can a tell Ant to not increment the build.number? I would do this for clean up as I haven't built anything. I know the obvious answer of creating a separate script for clean up only, but I'd rather keep the entire build.xml in one file.

  Read the article

• svn post-commit not performing

  - by davin

  ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

  Read the article

• Permissions needed to read event log messages remotely?

  - by Neolisk

  When running under a limited account, local event log messages are displaying fine, for remote computer I am getting this error: The description for Event ID ( xxxxx ) in Source ( yyyyy ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: zzzzz. Same remote computer works fine under domain administrator. I am currently experimenting with just the Event Viewer, by using Run As. Original issue is a PowerShell script which does Get-EventLog. Are there any special permissions that need to be in place to able to read event log messages remotely? Supposedly there is a simple solution in Windows 2008 and higher, i.e. just add user to Event Log Readers group. Is there anything like that for Windows 2003?

  Read the article

• Problem with room/screen/menu controller in python game: old rooms are not removed from memory

  - by Jordan Magnuson

  I'm literally banging my head against a wall here (as in, yes, physically, at my current location, I am damaging my cranium). Basically, I've got a Python/Pygame game with some typical game "rooms", or "screens." EG title screen, high scores screen, and the actual game room. Something bad is happening when I switch between rooms: the old room (and its various items) are not removed from memory, or from my event listener. Not only that, but every time I go back to a certain room, my number of event listeners increases, as well as the RAM being consumed! (So if I go back and forth between the title screen and the "game room", for instance, the number of event listeners and the memory usage just keep going up and up. The main issue is that all the event listeners start to add up and really drain the CPU. I'm new to Python, and don't know if I'm doing something obviously wrong here, or what. I will love you so much if you can help me with this! Below is the relevant source code. Complete source code at http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip MAIN.PY class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() EVENT_MANAGER.PY class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.last_listeners = {} self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def clear(self): del self.listeners[:] #---------------------------------------------------------------------- def post(self, event): # if isinstance(event, MouseButtonLeftEvent): # debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" print 'Number of listeners: ' + str(len(self.listeners)) for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) def notify(self, event): pass #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent) or isinstance(incoming_event, BoardCreationTick): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 2: #Button 2 pos = pygame.mouse.get_pos() ev = MouseButtonRightEvent(pos) elif event.type == pygame.MOUSEBUTTONUP and not self.input_freeze: if event.button == 2: #Button 2 Release pos = pygame.mouse.get_pos() ev = MouseButtonRightReleaseEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) # elif isinstance(event, BoardCreationTick): # #Share some time with other processes, so we don't hog the cpu # pygame.time.wait(5) # # #If this event manager has an associated PGU GUI app, notify it of the event # if self.ev_manager.gui_app: # self.ev_manager.gui_app.event(event) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent(fps=fps)) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False EXAMPLE CLASS USING EVENT MANAGER class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1

  Read the article

• Post to a page wall that I'm not admin

  - by Jirico

  I created an app to post to pages the user chooses. How can I direct the message to a page Wall on behalf of the user? From my tests the post is sent, but the page can't see it and the page is not notified either. I have OAuth extended Permissions of publish_stream, what else do I need to my post not being invisible? I will try to clarify the problem in details: 1- I send a post to a Facebook page that is not mine, I'm just a normal user, via application that ask for publish_stream, read_stream permissions. 2- I verify the page logging as admin but no notification is delivered and I can't see the post on my Wall. 3-If I log as the sender user I can see the post on page Wall, it looks like the post is private and just the sender user can see It. If I try to recover the post via Graph API using the same user it returns false. 4- Only the users who has the app installed can see the post on page wall.

  Read the article

• What are "build-essential" & "build-dep"?

  - by Adam Siddhi

  I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev sudo apt-get build-dep ruby1.9 and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev

  Read the article

• How do you end up with event-sourcing if you use a xDD approach?

  - by Tomas Jansson

  When working in a TDD or BDD manner your unit tests are supposed to drive your design. But how do you end up with event-sourcing using a xDD techniques? As I see it event sourcing is something you need to adopt early on to take full advantage of it. Lets say that you start without event-sourcing and do a release. Later on when you are releasing version 2.0 you realize that it would be great to use event-sourcing, but at that point you alread have missed all the events from version 1.0 so it makes it much harder to implement. Or do you take some kind of backup of your db from before event-sourcing and use that as base line and then add event-sourcing on top of that?

  Read the article

• Best build dir location to use in Xcode

  - by neoneye

  I'm consolidating my Xcode/TextMate setup and is interested in where you put your build dir. Some years ago I started out having the build dir in the same dir as my xcodeproj file. However it became a mess when my project became a multi project with a applications and frameworks and tests, so I started using ../build as the build dir, so that all the sub projects used the same dir. However Spotlight is indexing this build dir and TextMate's global find is unusable when there is a build dir in the project. I'm thinking either using ~/.build or /build as Xcode's build dir. What build dir do you use and why?

  Read the article

• XP SP2 Event log not logging events

  - by Weedfreer

  I have a problem whereby a terminal appears not to be logging events correctly and occasionally appears to have problems communicating accross the network.The terminal has previously been infected with a virus which apears to have 'played' with the default group policy in the standard user profile. Although, outwardly, the terminal appears to be working normally I still have a nagging feeling that it isn't quite back to the way it was. It was infected by a user plugging in a USB Stick while the company was using the older version of the AV software...typically a week or so before it was updated.I have configured the Event logs to Overwrite as required and to be 5056KB in Maximum size. I have also attempted:- Disabling the Event Log service & restarting Renewing the EVT files in Windows\system32\config directory Restarting the event log service and restarting Clearing the event log in the Services MMC Resetting the Filters to Default in the services MMC Using the EVENTCREATE command remotely from a CMD window on the server to force an event creation event. So far the only operation to have any sort of success is the remote computer EVENTCREATE command from a CMD window on the server. As it stands, the only other time that the computer has managed to create events is while it is being restarted.Has anyone gotany ideas on how to proceed? I'm thinking that possibly a refresh of the 'Windows\system32\config\SystemProfile' folder. I'm also thinking about running a tool such as Malwarebytes but this could be slightly controvertial as the system needs to be running on 'up-time' for as long as possible. I'm also wonderign whether anyone knows of any Windows admin tools that allow me to control the event logging options or default security options so that i could get it back to some sort of standard.What I'm trying to avoid is a complte re-imaging of the terminal. Although this is an option, I dont really want to have to take it if i dont need to.Many thanks in advance for any suggestions anyone may be able to provide.

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]domain.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]swg.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• How to Recursively Delete wildcard files in TFS Build?

  - by Chris Arnold

  I want to recursively delete files that match a certain pattern as part of my post-build cleanup routines in TFS Build. I've tried this... <Delete Files="T:\DeploymentDir\**\A*" /> No errors in the build, but it doesn't work.

  Read the article

• What's the ROI of using a build tool like ant or nant?

  - by leeand00

  To me this sounds like a really stupid question. Why would you not use a build tool? However, I need to explain my co-worker why he should be using a build tool of some sort. He's getting really into the idea of working as a team with more programmers, but he isn't understanding the bigger picture of what needs to change in the build process in order to work with a larger team; (i.e. defensive programming/unit testing your code, having a bug database, programming modular libraries, and using sub-repositories to store modules in version control. This is a rather large stack of technologies that I need to prove the ROI of...so I figured I'd start with the ROI of using a build tool rather than just...say...clicking compile.

  Read the article

• How do you use build labels in publishers in cruisecontrol?

  - by Omnifarious

  I have this section in my CruiseControl config.xml file: <publishers> <onsuccess> <artifactspublisher dest="artifacts/${project.name}" file="projects/${project.name}/fred"/> <execute command="hg -R hg-succeeded/${project.name} pull"/> <execute command="hg -R hg-succeeded/${project.name} tag -l build-${label} -r tip"/> </onsuccess> </publishers> I'm getting tags that look like build-${label}. The ${label} part isn't being replaced by the build label like I expect. I'm expecting something like build.1 to show up in place of ${label}. How do I make this happen? I do have the default labelincrementer configured with a <labelincrementer /> tag in my project. Also, the CruiseControl documentation is absolutely awful. Is there better documentation anywhere?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >