Search Results

Search found 541 results on 22 pages for 'squeeze my lime'.

Page 6/22 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Debian Testing install USB menu does not respond to keyboard

  - by neurolysis

  I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, and installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing. I did some searching and couldn't find anything that looked similar. Any ideas?

  Read the article

• Startup Disk Creator tool for Debian

  - by user61954

  I was trying to create a USB bootable in Debian to install my new system. I couldnt find any easy to use tool in Debian. I tried downloading the hybrid iso image from the Debian site and copied it to the USB using the dd command as said in Debian site. But it didnt boot. Next I used the Startup Disk Creator tool in Ubuntu and it worked like a charm. Is there any similar tool in Debian? I know that there is Unetbootin but its difficult to install

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• Why is syslog so much slower than file IO?

  - by ceving

  I wrote a simple test program to measure the performance of the syslog function. This are the results of my test system: (Debian 6.0.2 with Linux 2.6.32-5-amd64) Test Case Calls Payload Duration Thoughput [] [MB] [s] [MB/s] -------------------- ---------- ---------- ---------- ---------- syslog 200000 10.00 7.81 1.28 syslog %s 200000 10.00 9.94 1.01 write /dev/null 200000 10.00 0.03 343.93 printf %s 200000 10.00 0.13 76.29 The test program did 200000 system calls writing 50 Bytes of data during each call. Why is Syslog more than ten times slower than file IO? This is the program I used to perform the test: #include <fcntl.h> #include <stdio.h> #include <string.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <syslog.h> #include <unistd.h> const int iter = 200000; const char msg[] = "123456789 123456789 123456789 123456789 123456789"; struct timeval t0; struct timeval t1; void start () { gettimeofday (&t0, (void*)0); } void stop () { gettimeofday (&t1, (void*)0); } void report (char *action) { double dt = (double)t1.tv_sec - (double)t0.tv_sec + 1e-6 * ((double)t1.tv_usec - (double)t0.tv_usec); double mb = 1e-6 * sizeof (msg) * iter; if (action == NULL) printf ("Test Case Calls Payload Duration Thoughput \n" " [] [MB] [s] [MB/s] \n" "-------------------- ---------- ---------- ---------- ----------\n"); else { if (strlen (action) > 20) action[20] = 0; printf ("%-20s %-10d %-10.2f %-10.2f %-10.2f\n", action, iter, mb, dt, mb / dt); } } void test_syslog () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, msg); stop (); closelog (); report ("syslog"); } void test_syslog_format () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, "%s", msg); stop (); closelog (); report ("syslog %s"); } void test_write_devnull () { int i, fd; fd = open ("/dev/null", O_WRONLY); start (); for (i = 0; i < iter; i++) write (fd, msg, sizeof(msg)); stop (); close (fd); report ("write /dev/null"); } void test_printf () { int i; FILE *fp; fp = fopen ("/tmp/test_printf", "w"); start (); for (i = 0; i < iter; i++) fprintf (fp, "%s", msg); stop (); fclose (fp); report ("printf %s"); } int main (int argc, char **argv) { report (NULL); test_syslog (); test_syslog_format (); test_write_devnull (); test_printf (); }

  Read the article

• Dnsmasq offering IP via DHCP, but nobody is accepting

  - by Matt

  As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

  Read the article

• Changes to talk/ytalk or alternative chat in the Linux terminal

  - by cascaval

  While looking for a piece of software that provides chat between 2 Linux server users logged in the terminal, I tried talk/ytalk. Unfortuntaley it provides chat between users on separate walls (each user has its own wall) and the messages lack timestamps. Is it possible to set it up so that at least timestamps are provided? Alternatively, is there any other software that could provide one wall on which users write messages prepended with time? Simple chat with messages listed in the order of submission would be ideal: 13:05:48 [bridgekeeper@...]: What is the air-speed velocity of an unladen swallow? 13:06:28 [cascaval@...]: What do you mean? An African or European swallow? I already tried wall and write but they don't fit the bill. OS: Debian 6.0

  Read the article

• Backup broken PostgreSQL 8.4 without pg_dump

  - by Daniil

  So. I have a problem. PostgreSQL 8.4 won't start or restart without any output given. But it worked for 3 monthes until hosting provider doesn't rebooted server. Now it is completly broken. It wan't start and doesn't give any output or log. pg_dump: [archiver (db)] connection to database "postgres" failed: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? Now I want to backup (or just start pgsql socket) my database to reinstall postgesql. How?

  Read the article

• Best practices for setting lm-factor in Squid refresh patterns

  - by Mpentecost

  I am running a Squid (3.1) cache in front of Django. The content of the site does not change very often, so Squid gives our backend much needed breathing room. Currently, this is the refresh pattern that we are using to cache the content: refresh_pattern . 60 100% 60 We basically want to cache everything for at least an hour (and only an hour) before Squid then re-validates the content. My question is on the "100%" parameter, which sets the lm-factor. I'm not sure if setting that to 100% is doing what we want it to. The assumption was that by setting it to 100%, it would ensure that objects stay in the cache for the max cache time. Is this an incorrect assumption? What are the best practices that one should follow when setting up a refresh pattern like this?

  Read the article

• Find slow network nodes between two data centers

  - by 2called-chaos

  I've got a problem with syncing big amount of data between two data centers. Both machines have got a gigabit connection and are not fully occupied but the fastest that I am able to get is something between 6 and 10 Mbit = not acceptable! Yesterday I made some traceroute which indicates huge load on a LEVEL3 router but the problem exists for weeks now and the high response time is gone (20ms instead of 300ms). How can I trace this to find the actual slow node? Thought about a traceroute with bigger packages but will this work? In addition this problem might not be related to one of our servers as there are much higher transmission rates to other servers or clients. Actually office = server is faster than server <= server! Any idea is appreciated ;) Update We actually use rsync over ssh to copy the files. As encryption tends to have more bottlenecks I tried a HTTP request but unfortunately it is just as slow. We have a SLA with one of the data centers. They said they already tried to change the routing because they say this is related to a cheap network where the traffic gets routed through. It is true that it will route through a "cheapnet" but only the other way around. Our direction goes through LEVEL3 and the other way goes through lambdanet (which they said is not a good network). If I got it right (I'm a network intermediate) they simulated a longer path to force routing through LEVEL3 and they announce LEVEL3 in the AS path. I basically want to know if they're right or they're just trying to abdicate their responsibility. The thing is that the problem exists in both directions (while different routes), so I think it is in the responsibility of our hoster. And honestly, I don't believe that there is a DC2DC connection which only can handle 600kb/s - 1,5 MB/s for weeks! The question is how to detect WHERE this bottleneck is

  Read the article

• supervisord failed to start nagiosapi after reboot, need to run reload manually

  - by Bajingan Keparat

  I have supervisord to start nagiosapi everytime the server starts. The API created a status dump file called status.dat, which will get updated periodically. The following is the conf file that starts the api. [program:nagapi] directory = /home/nagapi user = api command = /bin/bash -c "source /home/nagapi/.virtualenvs/nagapi/bin/activate; /home/nagapi/nagios-api/nagios-api" stdout_logfile = /home/nagapi/supervisor_nagios-api_stdout.log stderr_logfile = /home/nagapi/supervisor_nagios-api_stderr.log Everytime i restart the server, supervisord cannot start the api. stderr.log claims that it cannot find the status.dat file located in /var/cache/nagios3. It seems like the files was not created yet when supervisor tried to run the api the first time. I'm saying this because if i do a supervisorctl reload, everything would reload just fine, and the api would run ok about 50 seconds after the reload command completes. should i change the command option of the conf file to check for

  Read the article

• Cannot access site via IP / hostname

  - by DaveB

  I am renting a VPS with Debian installed running JBoss AS6 for my web app. I recently had some problems with my DNS hosts as they messed up the A-records for my domain which caused some new A-records to be added by mistake The DNS problem is now sorted and the domain is working ok, however I noticed that the web server no longer responds via direct IP or hostname in a web browser (although it pings ok and I can SSH in using the hostname ok) Is there any explanation for this? I am using rinetd to forward traffic from 80 to port 8080 but thats been ok for a while Any suggestions would be appreciated Regards

  Read the article

• What is a good partitioning design/scheme for a multi-boot *nix system?

  - by static

  I'm planning to install Debian on my server. I would like to design the partitioning scheme in such a way, that I could install one or more other *nix distributives on that. So, reading many articles I think this scheme could be a good one for the initial idea of multi-boot: /grub /swap /LVM VG1 (for OS1) -> /boot (LV1) / (LV2) /tmp (LV3) /var ... /var/log /home /LVM VG2 (for OS2) -> /boot / /tmp /var /var/log /home ... (other distros) /LVM VG0 (for data) -> /data (LV1) But I'm confused a little bit now: what should be the labels for these partitions (unique or not) and what should be the mounting points looking as (/home (OS1) mounted to /home as well as /home (OS2)...)?

  Read the article

• Remote desktop to my KVM virtual machine

  - by user6

  I've got a dedicated server running Debian 6. I've set up a windows 7 virtual machine using KVM. Now I'm trying to get Remote desktop working. I'm guessing i have to do some port forwarding. The virtual machine is in a NAT. Remote desktop is already set up on it (another virtual machine can connect). I've tried using the iptables and countless of virsh commands of which I'm not even sure what they did. Anyone knows how to get this working?

  Read the article

• SSH stops at "using username" with IPTables in effect

  - by Rautamiekka

  We used UFW but couldn't make the Source Dedicated ports open, which was weird, so we purged UFW and switched to IPTables, using Webmin to configure. If the inbound chain is on DENY and SSH port open [judged from Webmin], PuTTY will say using username "root" and stops at that instead of asking for public key pw. Inbound chain on ACCEPT the pw is asked. This problem didn't happen with UFW. Picture of IPTables configuration in Webmin: http://s284544448.onlinehome.us/public/PlusLINE%20Dedicated%20Server,%20Webmin,%20IPTables,%200.jpgThe address is to the previous rautamiekka.org. iptables-save when on INPUT DENY: # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *mangle :PREROUTING ACCEPT [1430:156843] :INPUT ACCEPT [1430:156843] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1415:781598] :POSTROUTING ACCEPT [1415:781598] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *nat :PREROUTING ACCEPT [2:104] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1247:708906] -A INPUT -i lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT -A INPUT -p tcp -m comment --comment "Services - TCP" -m tcp -m multiport --dports 22,80,443,10000,20,21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m comment --comment "Minecraft - TCP" -m tcp --dport 25565 -j ACCEPT -A INPUT -p udp -m comment --comment "Minecraft - UDP" -m udp --dport 25565 -j ACCEPT -A INPUT -p tcp -m comment --comment "Source Dedicated - TCP" -m tcp --dport 27015 -j ACCEPT -A INPUT -p udp -m comment --comment "Source Dedicated - UDP" -m udp -m multiport --dports 4380,27000:27030 -j ACCEPT -A INPUT -p udp -m comment --comment "TS3 - UDP - main port" -m udp --dport 9987 -j ACCEPT -A INPUT -p tcp -m comment --comment "TS3 - TCP - ServerQuery" -m tcp --dport 10011 -j ACCEPT -A OUTPUT -o lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT COMMIT # Completed on Wed Apr 11 16:09:20 2012 iptables --list when on INPUT DENY: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ ACCEPT tcp -- anywhere anywhere /* Services - TCP */ tcp multiport dports ssh,www,https,webmin,ftp-data,ftp state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere /* Minecraft - TCP */ tcp dpt:25565 ACCEPT udp -- anywhere anywhere /* Minecraft - UDP */ udp dpt:25565 ACCEPT tcp -- anywhere anywhere /* Source Dedicated - TCP */ tcp dpt:27015 ACCEPT udp -- anywhere anywhere /* Source Dedicated - UDP */ udp multiport dports 4380,27000:27030 ACCEPT udp -- anywhere anywhere /* TS3 - UDP - main port */ udp dpt:9987 ACCEPT tcp -- anywhere anywhere /* TS3 - TCP - ServerQuery */ tcp dpt:10011 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ The UFW rules prior to purging on INPUT DENY: 127.0.0.1 ALLOW IN 127.0.0.1 3306 DENY IN Anywhere 20,21/tcp ALLOW IN Anywhere 22/tcp (OpenSSH) ALLOW IN Anywhere 80/tcp ALLOW IN Anywhere 443/tcp ALLOW IN Anywhere 989 ALLOW IN Anywhere 990 ALLOW IN Anywhere 8075/tcp ALLOW IN Anywhere 9987/udp ALLOW IN Anywhere 10000/tcp ALLOW IN Anywhere 10011/tcp ALLOW IN Anywhere 25565/tcp ALLOW IN Anywhere 27000:27030/tcp ALLOW IN Anywhere 4380/udp ALLOW IN Anywhere 27014:27050/tcp ALLOW IN Anywhere 30033/tcp ALLOW IN Anywhere

  Read the article

• Reset rc.d so software starts at boot again

  - by natli

  I ran the following 2 commands on my VPS box and now it boots without starting any software at all. According to rcconf it's still supposed to start my chosen software (ssh etc.) but it doesn't. update-rc.d vz defaults update-rc.d vzeventd defaults I already tried removing them again with update-rc.d -f vz remove update-rc.d -f vzeventd remove But that didnt't change anything. /etc/rc.local also still correctly lists some scripts I want to run at start-up, but they don't seem to be called either. I expect the top 2 commands to be responsible, but here's everything I did: mkdir /var/openvz-dl cd /var/openvz-dl wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-devel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-core-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-lib-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/vzquota/3.1/vzquota-3.1-1.x86_64.rpm apt-get install fakeroot alien fakeroot alien --to-deb --scripts --keep-version vz*.rpm ploop*.rpm dpkg -i vz*.deb ploop*.deb --force-overwrite update-rc.d vz defaults update-rc.d vzeventd defaults reboot A huge part of that failed because I was running it on an OpenVZ VPS which has a shared kernel that can't be altered, so I also had to fix the dpkg like so (it was moaning about wanting to install vzkernel with a package not being found); rm /var/lib/dpkg/info/vzkernel* dpkg-reconfigure vzkernel --force dpkg --purge --force-all vzkernel But that didn't fix the boot issue either. How do I make my software start at boot again?

  Read the article

• Can I install a tool like Zimbra or Funambol on a server that is already managed by Syscp?

  - by bensch

  I have a server that is managed by Syscp. The question is, if there are unresolveable dependencies, or services, that are managed by syscp already? For example Zimbra is intended using postfix but syscp is managing that already. I guess, that will not be possible, but maybe without having the full functionality of Zimbra. I only need the calendar and contacts-support with CalDav. (besides: I am using debian sqeeze but this is interesting in general)

  Read the article

• modprobe not found at all

  - by timmeyh

  I know that a lot of people had problems finding modprobe which was mostely due to an unconfigured $PATH. This time however I logged into a machine (Linux mymachine 2.6.32-6-pve #1 SMP Mon Jan 23 08:27:52 CET 2012 i686 GNU/Linux with root rights) and modprobe wasn't found at all. This are the steps I have taken so far: - which modprobe => no results - locate modprobe => no results - my $PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11: - find / -name "modprobe*" => /proc/sys/kernel/modprobe - cat /proc/sys/kernel/modprobe => /sbin/modprobe - /sbin/modprobe => no such file or directory Ass you can see no modprobe at all. Does anyone else has a suggestion/ sollution so I can use modprobe?

  Read the article

• Nginx Server Block Not Working? - Already running other vhosts just this one not working

  - by daveaspinall

  Im running a Debian 6 LEMP server with multiple virtual hosts and everything has been fine for 5 or so sites. But I've just tried adding another but for some reason it's just not working. By not working I mean in Chrome I get the "Oops! Google Chrome could not connect to subdomain.domain.net" error. I've changed the domain for security to subdomain.example.com and the IP is masked. Hosts file (I have multiple sub domains): xxx.xxx.xx.xxx *.example.com *.example Server Block: server { listen 80; server_name subdomain.example.com; access_log /srv/www/subdomain.example.com/logs/access.log; error_log /srv/www/subdomain.example.com/logs/error.log; root /srv/www/subdomain.example.com/public_html; location / { index index.html index.htm index.php; } location ~ \.php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } I've created the system link to the file in the /etc/nginx/sites-enabled/ directory and restarted/reloaded nginx. DNS seems fine: # ping -c 2 subdomain PING subdomain.example.com (xxx.xxx.xx.xxx) 56(84) bytes of data. 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=1 ttl=64 time=0.035 ms 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=2 ttl=64 time=0.048 ms Checking the file with cURL works: # curl http://subdomain.example.com HTML - OK Emptied browser cache but still no dice. Anything I'm missing? Like I mentioned, I have a few sites running fine on the server currently so php-fpm etc etc are working. Any help would be much appreciated! Cheers, Dave

  Read the article

• Configure exim in debian 6

  - by blakcaps

  I am trying to configure exim with gmail in my debian 6 system as per this tutorial http://www.manu-j.com/blog/wordpress-exim4-ubuntu-gmail-smtp/75/.After configuring, When i run update-exim4.conf i am getting this message, Exim configuration error: two client authenticators (gmail_login and login) have the same public name (LOGIN) Invalid new configfile /var/lib/exim4/config.autogenerated.tmp, not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated Any pointers to solve this?

  Read the article

• Compiz: Switching focus by application instead of by window

  - by Ivan Vucica

  I got used to OS X way of doing things (separate shortcuts for switching between applications and switching between current application's windows). Is there a way to get Compiz to have a shortcut (such as Super+Tab) to switch between applications ("window groups") instead of between windows? I already got the "Scale" plugin (an expose clone) to display only windows from current window group, proving there is a way to group by application, but I cannot find a way to get the "Application Switcher" to switch between these groups instead of between windows themselves.

  Read the article

• Why are some web clients requesting a page named "cache"?

  - by Toto

  We see errors like this in the apache error log: [Thu May 17 14:32:35 2012] [error] [client 192.168.1.1] File does not exist: /home/www-data/mywebsite.com/r/cache, referer: http://www.mywebsite.com/r/1010 It is strange because: There is no reference in the code/url about a folder/file "cache". The folder/file "cache" does not exist The client is randomly trying to access a "cache" folder everywhere on the website. It is always trying to access the folder/file "cache" following this pattern: Pattern: /level1/.../levelwhatever/filename (referer) /level1/.../levelwhatever/cache We run a LAMP (Debian stable: PHP 5.3.3-7+squeeze9. We also use APC 3.1.3p1). We use Google Analytics and AdSense. We do not know how to reproduce the problem. Note: I replaced the user's IP in the code for privacy.

  Read the article

• Do Parallels Plesk Panel 11 have free inbuilt firewall for Debian 6 Linux OS? [closed]

  - by Sampath

  Possible Duplicate: How strong is parallels plesk 11 inbuilt firewall for linux os? I am new to Linux Dedicated server hosting and plesk panel 11 , i am looking for inbuilt firewall module . Is it comes with free in plesk 11 or i need to pay or plesk 11 doesn't support firewall?. I looked at the demo http://www.parallels.com/products/plesk/demos/, but i couldn't find any information about firewall in plesk 11.

  Read the article

• Debian 6 or CentOS 6 - which one is easiest for latest versions of Ruby and Postgres?

  - by A4J

  I am getting a new server as I've messed up my current box, while trying to install Postgres 9 (on my CentOS 5.8 box). To cut a long story short, I removed postgres but yum decided to remove virtualmin-base as well, which broke my virtualmin install (postfix/dovcot stopped working). Virtualmin advise a fresh install once virtualmin-base has been removed/reinstalled. So I'll probably make a decision based on this simple criteria: which distro out of the two makes it easiest for installing the latest versions of Ruby and Postgres? They are both equally respected as web servers, so I really don't mind either way - I just want to use the one that will work best with the software I need.

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >