Search Results

Search found 1714 results on 69 pages for 'western digital'.

Page 6/69 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• ext4: error loading journal

  - by cloudyOutside

  I have an external hard drive with two partitions: A small FAT32 which is mostly empty and works fine and a large ext4 with tons of data, most of which isn't backed up. The ext4 is visible, but can't be mounted. I get an "error loading journal" error. The drive is a Western Digital Caviar Blue 500GB. Roughly 30GB of that is FAT32 and the rest is the ext4. The light on the enclosure turns red when reading from the bad partition. It was made by Cavalry. There wasn't any warning, but coincidentally, I've been thinking lately that I should get two large capacity drives for real backups. Is there anything that can be done? I'm not even sure I have enough storage to backup everything even if it is redeemable.

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Sound problems in Windows 7

  - by Plastkort

  hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

  Read the article

• How to generate RSA-SHA256 digital signature with OpenSSL libraries?

  - by rursw1

  Hi, I need to generate a digital signature from C++ code, using OpenSSL libraries. I understood that I need for that DSA \ DSA_do_sign, but didn't understand how exactly to use it. Does someone have an example for that, or a reference for better than OpenSSL's supplied docs? Thanks in advance!

  Read the article

• How to fix error 1330 (invalid digital signature) when installing "The Rosetta Stone"

  - by victoriah

  I bought an older version of this software from a friend and the Rosetta Stone support hasn't been of much use. When installing, at the end of the process I get an error from the installer that says something along the lines of: Error 1330. A file that is required cannot be installed because the cabinet file [file.cab] has an invalid digital signature. This isn't the first time I've had such an error, some time ago I was unable to install a game I bought because of the same thing. I extracted the cab file itself just to see what it was and it's just an archive of icons and things like that, so it's not even like I'm missing out on much :/ Any advice/tips on how to work around this error would be appreciated e.g. if it's possible to make the installer ignore digital signatures. Running Windows 7.

  Read the article

• Recovering damaged external hard disk by installing internally

  - by nfarshchi

  I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• Scanning for digital cable on me-tv

  - by Jared

  I have a pinnacle pchd 800 USB tuner that I want to use with Me-TV. I can't figure how to get it to scan for digital clear cam channels though, I've tried the standard cable frequency option and it didn't get anything. I'm in the U.S. and have Time Warner cable.

  Read the article

• Move files from Mac to Canon PowerShot digital camera

  - by Frost Shadow

  When I plug my Canon PowerShot digital camera into Snow Leopard, it automatically opens iPhoto and asks to import the pictures, but does not mount the camera on the desktop (from what I read, it's a Canon feature to prevent people from screwing up the file system on the memory card, or something). Is there a way I can move photos I've already imported back on to the camera? I can't seem to figure out how to move stuff from Snow Leopard to the camera using iPhoto, and since it doesn't mount....

  Read the article

• Best intranet solution for a small digital agency?

  - by Rob B

  I work for a small digital agency (10-15 employees). We design and build websites (using php and Django). Are we better off building our own intranet using django or going for a pre built (free or paid for) solution? Key features needed: Project management (basecamp clone) Time reporting Local and external file sharing (dropbox clone)

  Read the article

• EU Research for ICT - Call 7 - biggest ever at € 780 million

  - by trond-arne.undheim

  Under the Digital Agenda for Europe, the Commission has committed to maintaining the pace of a 20% yearly increase of the annual ICT R&D budget at least until 2013. The EU's flagship policy programme calls for doubling of annual public spending on ICT R&D by 2020 and to leverage an equivalent increase in private spending to achieve the goals of Europe's 2020 strategy for jobs and growth. Call 7 is one of the biggest calls ever launched for information and communications technology (ICT) research proposals under the EU's research framework programmes. It will result in project funding of € 780 million in 2011. This funding will advance research on the future internet, robotics, smart and embedded systems, photonics, ICT for energy efficiency, health and well-being in an ageing society, and more. The €780 million call for proposals is part of the biggest ever annual Work Programme under the EU's 7th Framework Programme for Research. Almost €1.2 billion has been budgeted for 2011. €220 million were made available already in July 2010 for public private partnerships focusing on ICT for smart cars, green buildings, sustainable factories and the future internet. Universities, research centres, SMEs, large companies and other organisations in Europe and beyond are eligible to apply for project funding under ICT Call 7. Proposals can be submitted until 18 January 2011, after which they will be evaluated by independent panels of experts for selection on the basis of their quality. Background: Digital Agenda: European Commission announces €780 million boost for strategic ICT research. Call text: ICT Call 7 Deadline: 18/01/2011.

  Read the article

• Wired : "Japanese despise western games" - how much is it true?

  - by user712092

  Wired has article that western games are seen as "bad games". Why is that? If that is true, than what do they see as bad? This article, i think, is biased towards western games: “The other day,” says Q Entertainment’s Mielke, “I was having lunch with a friend and I said, ‘Have you ever played StarCraft?’ And he said, ‘What’s StarCraft?’ Sometimes it’s just really shocking that their gaming vocabulary isn’t as extensive as it could be. I think Japanese game developers need to start playing other people’s games to open their minds, just like a writer might want to read classic literature to be inspired.” Rather than trusting such articles, I rather ask here.

  Read the article

• Help importing video from old Sony digital tape HandyCam

  - by thatryan

  Some friends gave me their old HandyCam and a bunch of tapes asking me to put them on a DVD. The model is Sony DCR-TVR103 and it records onto Hi8 digital tapes. It has a firewire port also. I am trying to use import function in iMovie on OS X 10.6. Every import though the video is super fast, like playing in fast forward. Ever seen anything like this? How can I import this video? Thank you.

  Read the article

• D-Link DIR-685 and WD Scorpio Blue 1TB, 750GB, 640GB

  - by FoxyBOA

  Has anyone tried installing the WD Scorpio Blue 640gb, 750gb or 1TB 2.5" drives into the D-Link DIR-685? That drives a bit thicker than standard 2,5" HDD (12,5 mm instead of 9,5 mm) and I'm not sure that it fit into DIR-685.

  Read the article

• Moving from Analogue PBX to digital VoIP?

  - by saint

  I don't even know if this belongs here?. If not, do let me know. So we have an analogue Alkatel PABX system in our little office. We have extensions, direct lines and PBX lines. We are trying to move to a more digital/flexible way of handling the phones and I've heard good things about FreeSwitch. I have zero knowledge about it. My biggest question is how would one handle existing phone lines with such a system. Surely there must be a way to make and receive calls from outside. Just a help in the right direction would be fine. Thanks.

  Read the article

• Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

  - by Adam

  I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

  Read the article

• Help imorting video from old Sony Digital Tape handycam

  - by thatryan

  Friend gave me their OLD handycam and a bunch of tapes asking me to put them on a DVD. The model is Sony DCR-TVR103 and it records onto Hi8 Digital tapes. It has a firewire port also. I am trying to use import function in iMovie on OS X 10.6. Every import though the video is super fast, like playing in fast forward. Ever seen anything like this? How can I import this video? Thank you.

  Read the article

• Automatic switching between "digital output" (HDMI) and built-in speakers in Vista

  - by Laurence Gonsalves

  We occasionally connect my wife's laptop, which runs Vista, to our TV. Whenever we do this we have to manually switch the default audio output to "digital output" for the sound to go through the HDMI connection, and we also have to restart any apps that we want to send sound to the TV. We then have to perform a similar process when disconnecting. Is there any way to just have this be automatic? It seems absurd to have to do so much manual fiddling when a 40 year old transistor radio is "smart" enough to turn off the speakers and send sound to the headphones when headphones are plugged in. In case it helps, the name "RealTek" shows up in the sound card settings dialog.

  Read the article

• WesternDigital SmartWare - still problematic?

  - by FrustratedWithFormsDesigner

  I've seen a lot of bad press on WD SmartWare (I think it comes on most WD backup devices now, such as their MyBook product line), mostly related to how it's impossible to remove properly or replace. There are allegations (I couldn't tell how true they were) that it has/is a rootkit, as well. Most of the articles are a couple of years old, so I'm wondering if SmartWare is still just as problematic as it was. Does it still have a nasty rootkit reputation and should I just stick with the Windows 7 built-in backup system, or is the current SmartWare generation improved and better behaved?

  Read the article

• Mac Finder: WD My Passport won't mount

  - by Matt

  I really need your help. I have a WD My Passport 650GB (with Firewire and USB). I'm using it for almost a year now and it always worked fine. While underway I simply plug it in via Firewire - at home I connect it to my Airport Extreme to have it available as a network storage. Today I connected the hd to my macbookpro (via firewire) and NOTHING. The hd is starting (clearly making a sound and the power-indicator is flashing) but it won't appear in Finder. I also tried it with USB - no sign. I ran Disk Utility and tried to repair the disk. At first try I got a red error line saying that something is wrong with the "headers". However the repair completed with a success message saying that everything is ok. I also verified the hd. Also with a success message. I did that a few times again and unplugged it in between. Never got the error with the headers again - it's always completing and saying everything is ok. However I can't mount the drive. That is what Disk Utility is showing. Any ideas on that? I really need the files on that hd. thank you in advance!

  Read the article

• my WD Mybook wd5000h0032 is DEAD?

  - by Herudae

  Hello, i have a WD Mybook Premium (wd5000h032) it used to work just fine but suddenly i can't access to it. The blue lights turn on but the drive doesn't start, it makes no click, nor any other sound, it just like if it was disconnected from USB, of course my PC doesn't detect it, i've tried with trhee different USB cables two PCs and one laptop and nothing. Is it really dead? how can i recover the information stored there? i think the problem could be the case, if so, could i take out the disk and connect it as an internal drive? or could i buy another case?

  Read the article

• My WD Caviar Green SATA HDD cannot be detected

  - by obhasha

  I have a WD 2TB Caviar Green SATA HDD. I used it as an external hard drive formatted to FAT32. The main purpose was to store my PS3 games. It worked fine and all of a sudden my PS3 stopped detecting it. I tried connecting it to my pc and the same result. I took it off from the enclosure and plugged it directly to my PC and used the BIOS setup. The BIOS setup detects my HDD but it says it's 0.0MB!!! I also tried the WD Data Lifeguard Diagnostic tool and it wasn't much of use because the drive is not picking up by windows at all. Is my HDD dead? Is it beyond repair?

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• WD Caviar Green Extremely Slow

  - by Steven

  I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

  Read the article

• How to prevent WD MyBook Live Duo from going to sleep?

  - by Chris Pietschmann

  I have an issue of my WD MyBook Live Duo going into some kind of low power standby mode when it hasn't been accessed for awhile. When I try accessing the drive it takes a minute or two to become responsive. When this happens Windows Explorer says the drive is unavailable. If I'm accessing the drive regularly throughout the day then this issue doesn't occur. Does anyone know of a way to make the drive more readily accessible on demand?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >