Search Results

Search found 171 results on 7 pages for 'wires'.

Page 6/7 | < Previous Page | 2 3 4 5 6 7  | Next Page >

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • Can I split one ethernet line coming out of my wall into multiple separate lines?

    - by Burteçin 'Turk' Sapta
    Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

    Read the article

  • windows server 2003 speed issues

    - by farzinSH
    I have a HP server with windows server 2003 and 50 windows XP clients. Since a week and a half the networks speed suddenly drop 2-3 times per day. It gets so slow that none of the clients could work with the HIS program installed on them. We tried so many different things such as replacing the hubs,switches and even some wires. Every time one of these changes solves the problem and the network goes back to its normal state. I checked everything. Even when I disconnected all the clients from the server and connected it to just one computer the problem still remained for 2 hours. I just narrowed down the problem to the couple of likely speculations as follows: viruses? (Updated Kaspersky running on the server shows none) server hardware failure? Physical memory usage on the server? (Because the last time the problem occurred none of the changes above solved the issue so I restarted the server an checked the physical memory usage which was 2 GBs. But I noticed it's increasing over time to over 9 GBs...the server has 16 GBs of RAM.) I surfed the internet and got nothing. Any help would do us a lot....thanks in advance

    Read the article

  • Is there a way to measure wifi traffic on a network from a client?

    - by millimoose
    Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

    Read the article

  • Smart Help with UPK

    - by [email protected]
    A short lesson on how awesome Smart Help is. In Oracle UPK speak, there are targeted and non-targeted applications. Targeted applications are Oracle EBS, PeopleSoft, Siebel, JD Edwards, SAP and a few others. Non-targeted applications are either custom built or other third party off the shelf applications. For most targeted applications you'll see better object recognition (during recording) and also Help Integration for that application. Help integration means that someone technical modifies the help link in your application to call up the UPK content that has been created. If you have seen this presented before, this is usually where the term context sensitive help is mentioned and the Do It mode shows off. The fact that UPK builds context sensitive help for its targeted applications automatically is awesome enough, but there is a whole new world out there and it's called "custom and\or third party apps." For the purposes of Smart Help and this discussion, I'm talking about the browser based applications. How does UPK support these apps? It used to be that you had to have your vendor try to modify the Help link to point to UPK or if your company had control over the applications configuration menus, then you get someone on your team to modify this for you. But as you start to use UPK for more than one, two or three applications, the administration of this starts to become daunting. Multiple administrators, multiple player packages, multiple call points, multiple break points, help doesn't always work the same way for every application (picture the black white infomercial with an IT person trying to configure a bunch of wires or something funny like that). Introducing Smart Help! (in color of course, new IT person, probably wearing a blue shirt and smiling). Smart help eliminates the need to configure multiple browser help integration points, and adds a icon to the users browser itself. You're using your browser to read this now correct? Look up at the icons on your browser, you have the home link icon, print icon, maybe an RSS feed icon. Smart Help is icon that gets added to the users browser just like the others. When you click it, it first recognizes which application you're in and then finds the UPK created material for you and returns the best possible match, for (hold on to your seat now) both targeted and non-targeted applications (browser based applications). But wait, there's more. It does this automatically! You don't have to do anything! All you have to do is record content, UPK and Smart Help do the rest! This technology is not new. There are customers out there today that use this for as many as six applications! The real hero here is SMART MATCH. Smart match is the technology that's used to determine which application you're in and where you are when you click on Smart Help. We'll save that for a one-on-one conversation. Like most other awesome features of UPK, it ships with the product. All you have to do is turn it on. To learn more about Smart Help, Smart Match, Targeted and Non-Targeted applications, contact your UPK Sales Consultant or me directly at [email protected]

    Read the article

  • Creating a Synchronous BPEL composite using File Adapter

    - by [email protected]
    By default, the JDeveloper wizard generates asynchronous WSDLs when you use technology adapters. Typically, a user follows these steps when creating an adapter scenario in 11g: 1) Create a SOA Application with either "Composite with BPEL" or an "Empty Composite". Furthermore, if  the user chooses "Empty Composite", then he or she is required to drop the "BPEL Process" from the "Service Components" pane onto the SOA Composite Editor. Either way, the user comes to the screen below where he/she fills in the process details. Please note that the user is required to choose "Define Service Later" as the template. 2) Creates the inbound service and outbound references and wires them with the BPEL component:     3) And, finally creates the BPEL process with the initiating <receive> activity to retrieve the payload and an <invoke> activity to write the payload.     This is how most BPEL processes that use Adapters are modeled. And, if we scrutinize the generated WSDL, we can clearly see that the generated WSDL is one way and that makes the BPEL process asynchronous (see below)   In other words, the inbound FileAdapter would poll for files in the directory and for every file that it finds there, it would translate the content into XML and publish to BPEL. But, since the BPEL process is asynchronous, the adapter would return immediately after the publish and perform the required post processing e.g. deletion/archival and so on.  The disadvantage with such asynchronous BPEL processes is that it becomes difficult to throttle the inbound adapter. In otherwords, the inbound adapter would keep sending messages to BPEL without waiting for the downstream business processes to complete. This might lead to several issues including higher memory usage, CPU usage and so on. In order to alleviate these problems, we will manually tweak the WSDL and BPEL artifacts into synchronous processes. Once we have synchronous BPEL processes, the inbound adapter would automatically throttle itself since the adapter would be forced to wait for the downstream process to complete with a <reply> before processing the next file or message and so on. Please see the tweaked WSDL below and please note that we have converted the one-way to a two-way WSDL and thereby making the WSDL synchronous: Add a <reply> activity to the inbound adapter partnerlink at the end of your BPEL process e.g.   Finally, your process will look like this:   You are done.   Please remember that such an excercise is NOT required for Mediator since the Mediator routing rules are sequential by default. In other words, the Mediator uses the caller thread (inbound file adapter thread) for processing the routing rules. This is the case even if the WSDL for mediator is one-way.

    Read the article

  • Flow-Design Cheat Sheet &ndash; Part II, Translation

    - by Ralf Westphal
    In my previous post I summarized the notation for Flow-Design (FD) diagrams. Now is the time to show you how to translate those diagrams into code. Hopefully you feel how different this is from UML. UML leaves you alone with your sequence diagram or component diagram or activity diagram. They leave it to you how to translate your elaborate design into code. Or maybe UML thinks it´s so easy no further explanations are needed? I don´t know. I just know that, as soon as people stop designing with UML and start coding, things end up to be very different from the design. And that´s bad. That degrades graphical designs to just time waste on paper (or some designer). I even believe that´s the reason why most programmers view textual source code as the only and single source of truth. Design and code usually do not match. FD is trying to change that. It wants to make true design a first class method in every developers toolchest. For that the first prerequisite is to be able to easily translate any design into code. Mechanically, without thinking. Even a compiler could do it :-) (More of that in some other article.) Translating to Methods The first translation I want to show you is for small designs. When you start using FD you should translate your diagrams like this. Functional units become methods. That´s it. An input-pin becomes a method parameter, an output-pin becomes a return value: The above is a part. But a board can be translated likewise and calls the nested FUs in order: In any case be sure to keep the board method clear of any and all business logic. It should not contain any control structures like if, switch, or a loop. Boards do just one thing: calling nested functional units in proper sequence. What about multiple input-pins? Try to avoid them. Replace them with a join returning a tuple: What about multiple output-pins? Try to avoid them. Or return a tuple. Or use out-parameters: But as I said, this simple translation is for simple designs only. Splits and joins are easily done with method translation: All pretty straightforward, isn´t it. But what about wires, named pins, entry points, explicit dependencies? I suggest you don´t use this kind of translation when your designs need these features. Translating to methods is for small scale designs like you might do once you´re working on the implementation of a part of a larger design. Or maybe for a code kata you´re doing in your local coding dojo. Instead of doing TDD try doing FD and translate your design into methods. You´ll see that way it´s much easier to work collaboratively on designs, remember them more easily, keep them clean, and lessen the need for refactoring. Translating to Events [coming soon]

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

  • POST from edit/create partial views loaded into Twitter Bootstrap modal

    - by mare
    I'm struggling with AJAX POST from the form that was loaded into Twitter Bootstrap modal dialog. Partial view form goes like this: @using (Html.BeginForm()) { // fields // ... // submit <input type="submit" value="@ButtonsRes.button_save" /> } Now this is being used in non AJAX editing with classic postbacks. Is it possible to use the same partial for AJAX functionality? Or should I abstract away the inputs into it's own partial view? Like this: @using (Ajax.BeginForm()) { @Html.Partial("~/Views/Shared/ImageEditInputs.cshtml") // but what to do with this one then? <input type="submit" value="@ButtonsRes.button_save" /> } I know how to load this into Bootstrap modal but few changes should be done on the fly: the buttons in Bootstrap modal should be placed in a special container (the modal footer), the AJAX POST should be done when clicking Save which would first, validate the form and keep the modal opened if not valid (display the errors of course) second, post and close the modal if everything went fine in the view that opened the modal, display some feedback information at the top that save was succesful. I'm mostly struggling where to put what JS code. So far I have this within the List view, which wires up the modals: $(document).ready(function () { $('.openModalDialog').click(function (event) { event.preventDefault(); var url = $(this).attr('href'); $.get(url, function (data) { $('#modalContent').html(data); $('#modal').modal('show'); }); }); }); The above code, however, doesn't take into the account the special Bootstrap modal content placeholder (header, content, footer). Is it possible to achieve what I want without having multiple partial views with the same inputs but different @using and without having to do hacks with moving the Submit button around?

    Read the article

  • StrcutureMap Wiring - Sanity Check Please

    - by Steve Ward
    Hi - Im new to IOC and StructureMap and have an n-level application and am looking at how to setup the wirings (ForRequestedType ...) and just want to check with people with more experience that this is the best way of doing it! I dont want my UI application object to reference my persistence layer directly so am not able to wire everything up in this UI project. I now have it working by defining a Registry class in each project which wires up the types in the project as needed. The layer above registers its types and also calls the assembly below and looks for registries so that all types are registered throught the hierrachy. E.g. I have UI, Service, Domain, and Persistence libraries. In my service layer the registry looks like Scan(x => { x.Assembly("MyPersistenceProject"); x.LookForRegistries(); }); ForRequestedType<IService>().TheDefault.Is.OfConcreteType<MyService>(); Is this a recommended way of doing this in a setup such as this? Are there better ways and what are the advantages / disadvantages of these approaches in this case?

    Read the article

  • Are SQL Reporting Services Report Parameters deprecated in VS.NET 2010?

    - by Jason Kealey
    We use an Reporting Services inside an ASP.NET web application. (We have an *.rdlc which is presented to the ReportViewer web control in our page). Our ASPX page wires up a few report parameters in code: var parameters = new List<ReportParameter>(); parameters.Add(new ReportParameter("StoreAddress", InvoiceStoreAddress)); parameters.Add(new ReportParameter("LogoURL", InvoiceLogoURL)); parameters.Add(new ReportParameter("StoreName", InvoiceStoreName)); ReportViewer1.LocalReport.SetParameters(parameters); These are just general parameters that are passed to the report, instead of hooking it up to a data source. Recently, we upgraded to VS.NET 2010. We upgraded the *.rdlc to the newest version and also upgraded the ReportViewer control used by ASP.NET. Everything works as it did before. However, I now want to add a new report parameter to my *.rdlc. I typically right-clicked on the top left corner and clicked on "Report Parameters" to add it. With the new VS.NET, I cannot find this option anywhere - it is not even in the report properties. Where did it go? Are the deprecating this feature? How should I be passing some general parameters now?

    Read the article

  • Android Signal analysis + some filters.

    - by Profete162
    Hello, as the world cup is the main sport event and the Vuvuzelas are the most annoying sound in the world, I had an idea to remove them definitively by reading this new ( http://www.popsci.com/diy/article/2010-06/simple-software-can-filter-out-vuvuzela-whine) that told us that the sound has some frequencies at 233Hz + 466,932,1864Hz. I have already made a lot of Android application by myself but never touching the signal analysis and filtering part, so here are a few questions, I do not ask for precise answer but maybe links and tutorial to find something to work on. I guess that a new Android phone has the CPU and power to make real-time filtering. 1) How can I intercept the sound coming from the Jack microphone - Line-IN plug- ( I plan to link my TV to my phone with Jack to Jack plug). My question is totally software and coding, I have all the wires and adapters to plug a jack into my android phone Line IN. 2) Are there some Fourier analysis librairies, may I have a look to Java libraries on the web and import them to my Android project? I really apologize because my question seem not precise, but I think that would be something great. Thank you for your answers.

    Read the article

  • Parallel programming, are we not learning from history again?

    - by mezmo
    I started programming because I was a hardware guy that got bored, I thought the problems being solved in the software side of things were much more interesting than those in hardware. At that time, most of the electrical buses I dealt with were serial, some moving data as fast as 1.5 megabit!! ;) Over the years these evolved into parallel buses in order to speed communication up, after all, transferring 8/16/32/64, whatever bits at a time incredibly speeds up the transfer. Well, our ability to create and detect state changes got faster and faster, to the point where we could push data so fast that interference between parallel traces or cable wires made cleaning the signal too expensive to continue, and we still got reasonable performance from serial interfaces, heck some graphics interfaces are even happening over USB for a while now. I think I'm seeing a like trend in software now, our processors were getting faster and faster, so we got good at building "serial" software. Now we've hit a speed bump in raw processor speed, so we're adding cores, or "traces" to the mix, and spending a lot of time and effort on learning how to properly use those. But I'm also seeing what I feel are advances in things like optical switching and even quantum computing that could take us far more quickly that I was expecting back to the point where "serial programming" again makes the most sense. What are your thoughts?

    Read the article

  • Reality behind wireless security - the weakness of encrypting

    - by Cawas
    I welcome better key-wording here, both on tags and title, and I'll add more links as soon as possible. For some years I'm trying to conceive a wireless environment that I'd setup anywhere and advise for everyone, including from big enterprises to small home networks of 1 machine. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even considering hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what walling (building walls) is for the cables. And giving pass-phrases is adding a door with a key. But the cabling without encryption is also insecure. Someone just need to plugin and get your data! And while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. As I said elsewhere, I believe we should encrypt only sensitive data regardless of wires. And passwords should be added to the users, always, not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where people actually care on using passwords on their OS users, so let's go with that in mind. For being able to break the walls or the door someone will need proper equipment such as a hammer or a master key of some kind. Same is true for breaking the wireless walls in the analogy. But, I'd say true data security is at another place. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. And who doesn't want to be able to use internet freely anywhere you can find wifi spots? I have 3G myself, but that's beyond the point here. If I have a wifi at home I want to let people freely use it for internet as to not be an hypocrite and even guests can easily access my files, just for reading access, so I don't need to keep setting up encryption and pass-phrases that are not whole compatible. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think? Is there really a need for encryption to have true wireless security?

    Read the article

  • The Cindy Shearin Group: New Scam Targets Renters in the Area

    - by user226089
    MONROE - Craigslist is a popular site when trying to find that perfect deal on a rental home or apartment. Experts warn some of these rental ads aren't what they seem. We decided to take a look. On our Craigslist search we found this house for rent. The problem is this home’s not for rent - it's for sale. “I think it’s a huge deal,” said Shane Wooten, the realtor for this home in Monroe. His properties have become the target of a common scam, aimed at taking your money. "It looks like they're trying to scam them out of their deposit and first months rent," adds Wooten. He says scammers copy and paste the sale ad's from legitimate realtor sites to Craigslist as rental ads. "I can usually tell when one hits craigslist because I’ll usually get 20 to 30 phone calls that day." They then pretend to be out of town on business or personal matters, and give only an email address as a point of contact. Usually they'll ask for money up front on a deal too good to miss. "You'll have a house that's supposed to rent for $950-1000 a month, and they'll have it renting for $600 a month,” says Wooten During our conversation, he shows us text messages from one scammer who says he'll mail the keys to this house if Wooten wires money for a deposit and first months rent. Jo Ann Deal of the Better Business Bureau says scammers are getting better at making themselves out to be realtors. "We’re really concerned for our real estate agents with this scam," says Deal. She says that realtors have to be more on top of their vacant homes in order to protect their businesses. So how can you tell if the house you want is really for rent? She says if the home owner lives out of the country, can't meet face to face or asks for a payment through a money wire it's probably a scam. “There are some catch-lines you watch for,” says Deal. “If the marketing is really good but there's no phone number, no physical address and they will communicate with you only by email and you can do it today, then it's probably a scam." You should always report fishy ad's to Craigslist or the BBB and never send money through a wire transfer.

    Read the article

  • How can I play my MP3 files through my stereo system?

    - by Joel Coehoorn
    Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

    Read the article

  • Why Software Sucks...and What You Can Do About It – book review

    - by DigiMortal
        How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

    Read the article

  • Why is my external USB hard drive sometimes completely inaccessible?

    - by Eliah Kagan
    I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

    Read the article

  • Data Source Security Part 2

    - by Steve Felts
    In Part 1, I introduced the default security behavior and listed the various options available to change that behavior.  One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values.   The direct use of database credentials is relatively new to WLS, based on customer feedback.  Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password).  By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source.  If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used.  Because of this defaulting mechanism, you should be careful what permissions are granted to the default user.  Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user.  In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New.  2) Second, create the mapping.  In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead.  For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call.  Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source.  For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request.  It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source.  This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map.  Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map.  This is enabled by setting the “use-database-credentials” to true.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations.  When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0).  Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”.  The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used.  If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used.  If you specify a user/password when getting a connection, that user will be used for the credentials.  WLS users are not involved at all in the data source connection process.

    Read the article

  • NSLinguisticTagger on the contents of an NSTextStorage- crashing bug

    - by Remy Porter
    I'm trying to use an NSLinguisticTagger to monitor the contents of an NSTextStorage and provide some contextual information based on what the user types. To that end, I have an OverlayManager object, which wires up this relationship: -(void) setView:(NSTextView*) view { _view = view; _layout = view.layoutManager; _storage = view.layoutManager.textStorage; //get the TextStorage from the view [_tagger setString:_storage.string]; //pull the string out, this grabs the mutable version [self registerForNotificationsOn:self->_storage]; //subscribe to the willProcessEditing notification } When an edit occurs, I make sure to trap it and notify the tagger (and yes, I know I'm being annoyingly inconsistent with member access, I'm rusty on Obj-C, I'll fix it later): - (void) textStorageWillProcessEditing:(NSNotification*) notification{ if ([self->_storage editedMask] & NSTextStorageEditedCharacters) { NSRange editedRange = [self->_storage editedRange]; NSUInteger delta = [self->_storage changeInLength]; [_tagger stringEditedInRange:editedRange changeInLength:delta]; //should notify the tagger of the changes [self highlightEdits:self]; } } The highlightEdits message delegates the job out to a pool of "Overlay" objects. Each contains a block of code similar to this: [tagger enumerateTagsInRange:range scheme:NSLinguisticTagSchemeLexicalClass options:0 usingBlock:^(NSString *tag, NSRange tokenRange, NSRange sentenceRange, BOOL *stop) { if (tag == PartOfSpeech) { [self applyHighlightToRange:tokenRange onStorage:storage]; } }]; And that's where the problem is- the enumerateTagsInRange method crashes out with a message: 2014-06-04 10:07:19.692 WritersEditor[40191:303] NSMutableRLEArray replaceObjectsInRange:withObject:length:: Out of bounds This problem doesn't occur if I don't link to the mutable copy of the underlying string and instead do a [[_storage string] copy], but obviously I don't want to copy the entire backing store every time I want to do tagging. This all should be happening in the main run loop, so I don't think this is a threading issue. The NSRange I'm enumerating tags on exists both in the NSTextStorage and in the NSLinguisticTagger's view of the string. It's not even the fact that the applyHighlightToRange call adds attributes to the string, because it crashes before even reaching that line. I attempted to build a test case around the problem, but can't replicate it in those situations: - (void) testEdit { NSAttributedString* str = [[NSMutableAttributedString alloc] initWithString:@"Quickly, this is a test."]; text = [[NSTextStorage alloc] initWithAttributedString:str]; NSArray* schemes = [NSLinguisticTagger availableTagSchemesForLanguage:@"en"]; tagger = [[NSLinguisticTagger alloc] initWithTagSchemes:schemes options:0]; [tagger setString:[text string]]; [text beginEditing]; [[text mutableString] appendString:@"T"]; NSRange edited = [text editedRange]; NSUInteger length = [text changeInLength]; [text endEditing]; [tagger stringEditedInRange:edited changeInLength:length]; [tagger enumerateTagsInRange:edited scheme:NSLinguisticTagSchemeLexicalClass options:0 usingBlock:^(NSString *tag, NSRange tokenRange, NSRange sentenceRange, BOOL *stop) { //doesn't matter, this should crash }]; } That code doesn't crash.

    Read the article

  • Data Annotations validation Built into model

    - by Josh
    I want to build an object model that automatically wires in validation when I attempt to save an object. I am using DataAnnotations for my validation, and it all works well, but I think my inheritance is whacked. I am looking here for some guidance on a better way to wire in my validation. So, to build in validation I have this interface public interface IValidatable { bool IsValid { get; } ValidationResponse ValidationResults { get; } void Validate(); } Then, I have a base class that all my objects inherit from. I did a class because I wanted to wire in the validation calls automatically. The issue is that the validation has to know the type of the class is it validating. So I use Generics like so. public class CoreObjectBase<T> : IValidatable where T : CoreObjectBase<T> { #region IValidatable Members public virtual bool IsValid { get { // First, check rules that always apply to this type var result = new Validator<T>().Validate((T)this); // return false if any violations occurred return !result.HasViolations; } } public virtual ValidationResponse ValidationResults { get { var result = new Validator<T>().Validate((T)this); return result; } } public virtual void Validate() { // First, check rules that always apply to this type var result = new Validator<T>().Validate((T)this); // throw error if any violations were detected if (result.HasViolations) throw new RulesException(result.Errors); } #endregion } So, I have this circular inheritance statement. My classes look like this then: public class MyClass : CoreObjectBase<MyClass> { } But the problem occurs when I have a more complicated model. Because I can only inherit from one class, when I have a situation where inheritance makes sense I believe the child classes won't have validation on their properties. public class Parent : CoreObjectBase<Parent> { //properties validated } public class Child : Parent { //properties not validated? } I haven't really tested the validation in these cases yet, but I am pretty sure that anything in child with a data annotation on it will not be automatically validated when I call Child.Validate(); due to the way the inheritance is configured. Is there a better way to do this?

    Read the article

  • Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

    - by Brian
    How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

    Read the article

  • Is there really a need for encryption to have true wireless security? [closed]

    - by Cawas
    I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. That's the question, but I think it may need more elaborating on. If you don't think so, please feel free to skip the next (long) part. Elaborating more on the two aspects ... I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. But the cabling without encryption is also insecure. If someone plugin all the data is right there. So, while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. It's wasting resources for too little gain. I believe we should encrypt only sensitive data regardless of wires. That's already done with HTTPS, so I don't really need to encrypt my torrents, for instance. They're torrents, they are meant to be freely shared! As for using passwords, they should be added to the users, always. Not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where we actually use passwords on our OS users, so let's go with that in mind. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. But it's lacking the second aspect. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think?

    Read the article

  • TechEd 2010 Day One – How I Travel

    - by BuckWoody
    Normally when I blog on the first day of a conference, well, there hasn’t been a first day yet. So I talk about the value of a conference or some other facet. And normally in my (non-conference) blogs, I show you how I have learned to be a data professional – things I’ve learned how to do over the years. But in all that time, I don’t think I’ve ever talked about a big part of my job – traveling. I’ve traveled a lot throughout the years, when I’ve taught, gone to conferences, consulted and in my current role assisting Microsoft customers with large-scale database system designs.  So I’ll share a few thoughts about what I do. Keep in mind that I travel for short durations, just a day or so, and sometimes I travel internationally. For those I prepare differently – what I’m talking about here is what I do for a multi-day, same-country trip. Hopefully you find it useful. I’ll tag a few other travelers I know to add their thoughts.  Preparing for Travel   When I’m notified of a trip, I begin researching the location. I find the flights, hotel and (if I have to) a car to use while I’m away. We have an in-house system we use to book the travel, but when I travel not-for-Microsoft I use Expedia and Kayak to find what I need.  Traveling on Sunday and Friday is the worst. I have to do it sometimes (like this week) and it’s always a bad idea. But you can blunt the impact by booking as early as you can stand it. That means I have to be up super-early, but the flights are normally on time. I stay flexible, and always have a backup plan in case the flights are delayed or canceled.  For the hotel, I tend to go on the cheaper side, and I look for older hotels that have been renovated, or quirky ones. For instance, in Boise, ID recently I stayed at a 60’s-themed (think Mad-Men) hotel that was very cool. Always I go on the less expensive side – I find the “luxury” hotels nail me for Internet, food, everything. The cheaper places include all kinds of things, and even have breakfasts, shuttles and all kinds of things that start to add up. I even call ahead to make sure there’s an iron and ironing board available, since I’ll need those when I get there.  I find any way I can not to get a car. I use mass-transit wherever possible, and try to make friends and pay their gas to take me places. In a pinch, I’ll use a taxi. It ends up being cheaper, faster, and less stressful all around.  Packing  Over the years I’ve learned never to check luggage whenever I can. To do that, I lay out everything I want to take with me on the bed, and then try and make sure I’m really going to use it. I wear a dark wool set of pants, which I can clean and wear in hot and cold climates. I bring undies and socks of course, and for most places I have to wear “dress up” shirts. I bring at least two print T-Shirts in case I want to dress down for something while I’m gone, but I only bring one set of shoes. All the  clothes are rolled as tightly as possible as I learned in the military. Then I use those to cushion the electronics I take.  For toiletries I bring a shaver, toothpaste and toothbrush, D/O and a small brush. Everything else the hotel will provide.  For entertainment, I take a small Zune, a full PC-Headset (so I can make IP calls on the road) and my laptop. I don’t take books or anything else – everything is electronic. I use E-books (downloaded from our Library), Audio-Books (on the Zune) and I also bring along a Kaossilator (more here) to play music in the hotel room or even on the plane without being heard.  If I can, I pack into one roll-on bag. There’s not a lot better than this one, but I also have a Bag I was given as a prize for something or other here at Microsoft. Either way, I like something with less pockets and more big, open compartments. Everything gets rolled up and packed in, with all of the wires and charges in small bags my wife made for me. The laptop (and anything I don’t want gate-checked) goes on top or in an outside pouch so I can grab it quickly if I have to gate-check the bag. As much as I can, I try to go in one bag. When I can’t (like this week) I use this bag since it can expand, roll up, crush and even be put away later. It’s super-heavy canvas and worth the price. This allows me to not check a bag.  Journey Logistics The day of the trip, I have everything ready since I’m getting up early. I pack a few small snacks inside a plastic large-mouth water bottle, which protects the snacks and lets me get water in the terminal. I bring along those little powdered drink mixes to add to the water.  At the airport, I make a beeline for the power-outlets. I charge up my laptop and phone, and download all my e-mails so I can work on them off-line in the air. I don’t travel as often as I used to – just every month or so now, so I don’t have a membership to an airline club. If I travel much more, I’ll invest in one again – they are WELL worth the money, for the wifi, food and quiet if for nothing else.  I print out my logistics on paper and put that in my pocket – flight numbers, hotel addresses and phones for everything. That way if I have to make a change, I don’t have to boot up anything or even have power to be able to roll with the punches if things change.  Working While Away  While I’m away I realize I’m going to be swamped with things at the conference or with my clients. So I turn on Out-Of-Office notifications to let people know I won’t be as responsive, and I keep my Outlook calendar up to date so my co-workers know what I’m up to. I even update it with hotel and phone info in case they really need to reach me. I share my calendar with my wife so my family knows what I’m doing as well.  I check my e-mail during breaks, but I only respond to them in the evening or early morning at the hotel. I tweet during conferences. The point is to be as present as possible during the event or when I’m at the clients. Both deserve it.  So those are my initial thoughts. I’ll tag Brent Ozar, Brad McGeHee and Paul Randal, and they can tag whomever they wish. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Microsoft TechEd 2010 - Day 3 @ Bangalore

    - by sathya
    Microsoft TechEd 2010 - Day 3 @ Bangalore Sorry for my delayed post on day 3 because I had to travel from Blore to Chennai So I couldnt write for the past two days. On day 3 as usual we had lot of simultaneous tracks on various sessions. This day I choose the Your Data, Our Platform Track. It had sessions on the following 5 topics :   Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan Data Recovery / Consistency with CheckDB - by Vinod Kumar M Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam This was one of the superb sessions i have attended. He explained all the concepts in detail with a demo. The important thing in this is there is something called Data-Tier application project which is newly introduced in this VS2010 with which we can manage all our data along with our application inside our VS itself. We can create DB,Tables,Procs,Views etc. here itself and once we deploy it creates a compressed file called .dacpac which stores all the changes in Table Schema,Created procs, etc. on to that single file which reduces our (developer's) effort in preparing the deployment scripts and giving it to the DBA. It also has some policy configurations which can be managed easily by checking some rules like in outlook. For Ex : IF the SQL Server Version > 10 then deploy else dont. This rule specifies that even if we try to deploy on SQL Server DB with version less than 10 It will not do it. And if we deploy some .dacpac to SQL server production db with the option upgrade DB with this dacpac once everything completes successfully it will say success else it rollsback to the prior version. Even if it gets deployed successfully and later @ a point of time you wish to revert it back to the prior version, you can go ahead and delete the existing dacpac version so that it reverts to the older version of the db changes. And for the good questions that were asked in the session T-Shirts were given. SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M This one too was the best session. The speaker Vinod explained everything very much clearly. This was really useful session and you dont believe, as per my knowledge, in the total 3 days in the TechEd except the Keynote, for this session seats were full (House FULL)  People were even standing out to attend this session. Such a great one it was. The speaker did a deep dive in to the Query Plan section and showed which actually causes the problem. Its all about the thing that we need to understand about the execution of SQL server Queries. We think in a way and SQL Server never executes in that way. We need to understand that first. He also told about there might be two plans generated for a single query at a point of time because of parallel processors in the system. The Key is here in every query. There is something called Estimated Row Count and Actual Row Count in the query plan. If the estimated row count by SQL server tallies with the actual row count your performance will be awesome. He said some tweaks to achieve the same. After this as usual we had lunch SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan This was more of a DBA's session. Am really sorry I was totally blank and I was not interested to attend this session and walked out to attend Migrating to the cloud by Harish Ranganathan (My favorite Speaker) but unfortunately that was some other persons session. There the speaker was telling about how to configure the connection strings in such a way that we can connect to the SQL Azure platform from our VS and also showed us how to deploy the same in to Windows Azure. In between there were lot of technical problems like laptop hang, user locked and he was switching between systems, also i came in the half so i wasnt able to listen that fully. In between, Since I got an MCTS certification they gave me T-Shirt with the lines 'Iam Certified. Are you?' and they asked me to wear that. If we wear that we might get spotted and they would give us some goodies  So on the 3rd day I was wearing that T-Shirt. I got spotted by the person Tarun who was coordinating things about the certification, and he was accompanied with a cameraman and they interviewed me about the certification and I was shown live in the Teched and was seen by 60000 live viewers of the TechEd. I was really happy on that. Data Recovery / Consistency with CheckDB - by Vinod Kumar M This was one of the best sessions too in the TechEd. This guy is really amazing. In front of us he crashed a DB and showed how to recover the same in 6 different ways for different no of failures. Showed about Different types of error msgs like : 823,824,825 msdb..suspect_pages DBCC CheckDB (different parameters to it) I am really waiting for his session to get uploaded live in the Teched Website. Here is his contact info If you wish to connect to him : Twitter : @vinodk_sql Website : www.ExtremeExperts.com Blog : http://blogs.sqlxml.org/vinodkumar Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Pinal Dave is a King in SQL and he is a SQL MVP and he is the owner of SQLAuthority.com He took the session on Spatial Databases from the start. Showed about the different types of Spatial : Geometric and Geographic Geometric : x and y axis its a planar surface Geographic : Spherical surface with 3600  as the maximum which is used to represent the geographic points on the earth and easy to draw maps of different kinds. He had a lot of obstacles during his session like rain coming inside the hall, mic wires got bursted due to rain, Videos off on the display screens. In spite of that he asked the audience to come in the front rows and managed to take a good session without ppts and finally we got the displays on and he was showing demos on the same what he explained orally. That was really a fun filled informative session. He gave some books for the persons who asked good questions and answered well for his questions and I got one too  (It was a book on Data Mining - Wrox Publishers) And finally after all these things there was Keynote session for close of the TechEd. and we all assembled in a big hall where Mr.Ashok Soota, a man of age around 70  co-founder of Mindtree was called to give some lecture on his successes. He was explaining about his past and what all companies he switched and for what reasons and what are all his successes and what are all his failures and the learnings of him from his past failures. and his success and failures on his partnerships with the other concern. And there were some questions for him like What is your suggestion on young entrepreneur? How did you learn from past failures? What is reiterating your success? What is your suggestion on partnerships? How to choose partnerships? etc. And they said @ 7.30 Pm there would be a party night, but unfortunately i was not able to attend that because I had to catch my train and before that i had to pack things, so I started @ 7 itself. Thats it about the TechED!!! Stay tuned for further Technology updates.

    Read the article

< Previous Page | 2 3 4 5 6 7  | Next Page >