Search Results

Search found 12376 results on 496 pages for 'active pattern'.

Page 60/496 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • Windows 8 - no internet connetction to some hosts while VPN is active

    - by HTD
    I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

    Read the article

  • How to see active connections and "current activity" in PostgreSQL 8.4

    - by Evgeny
    I'm investigating an issue with DB connections being left open indefinitely, causing problems on the DB server. How do I see currently open connections to a PostgreSQL server, particularly those using a specific database? Ideally I'd like to see what command is executing there as well. Basically, I'm looking for something equivalent to the "Current Activity" view in MSSQL.

    Read the article

  • SQL Server Moved Active Directory Domain

    - by Ollie
    I have changed the AD domain on a SQL Server 2008 box which was setup only for Windows Authentication. Now the domain has changed, I can't log into the SQL Server instance even as the domain's Administrator account. Is there a way of updating the server security settings without logging into the SQL instance first through a command switch / registry setting / etc..

    Read the article

  • LTSP keeping sessions active whilst turning off thin clients

    - by map7
    I'm using LTSP on a Ubuntu 10.04 64bit box with 8 thin clients. I would like to save power by automatically turning off the thin clients at night, but I would like to have the ability to resume the staff's session in the morning. Is it possible to keep a session running whilst turning off the LTSP thin client and resuming that session when you power up the thin client the next time? Could this work if you login to another thin client in the morning and resume your session?

    Read the article

  • Windows Shares / NTFS permissions on folder redirection in Active Directory

    - by Shawn Gradwell
    A client has folder redirection in AD setup on each user's Home Folder set to the Z:\ drive as \server\share\username. A Group Policy redirects the user's Documents to the user's Home Folder with the option 'Grant the user to exclusive rights to Documents' selected. The share on the server has permissions for the relevant user security group with 'Full Control', but each user's folder only have NTFS permissions only for 'CREATOR OWNER' and 'Domain Admins'. Why can the different users access other user's folders? I thought the most restrictive permissions applied effectively between the share and the NTFS permissions. Also, this setup has been like this for years, and this client recently updated all client computers to Windows 7. What is the best way to setup this redirection now? I assume only in Group Policy, also Basic Redirection - to create a folder for each user under the root path?

    Read the article

  • Set security on pattern of sub folders (Server 2003)

    - by Mark Major
    I have a folder structure similar to the one shown below these paragraphs. How do I change security on every 'Photos' folder without clicking through each individually in Windows Explorer? There are about 50 top level folders (Bob, Jim, Eva, etc, etc) which have the same layout of folders inside. I am keen for any suggestions, either scripting or GUI. I am on Windows Server 2003. Cheap/free method would be good, as the company is part of a registered charity. Ideally I would like to do this via DFS path. E.G. \\mycompany.local\Shared\Staff\Bob\ Thanks for reading. Thanks for any info. Mark Bob Review Profile Photos Jim Review Profile Photos Eva Review Profile Photos

    Read the article

  • Search audio file for pattern?

    - by Mark
    I want to split a very large audio file at certain points. At certain points a radio announcer comes on and says something like "deux radio" and it always sounds exactly the same (it's a recorded clip). So how can I find that bit of repeated audio through out the entire mp3? It would be nice if I could split at that point, but even if it spits out the times, I can split it with another program.

    Read the article

  • Get active network interface on Windows

    - by Kevin Walzer
    I'm developing an application that provides a UI to windump, the packet sniffer. Windump has a "-D" parameter that lists all network interfaces it can find, and then you can specify which interface to listen on. However, I'd like to avoid forcing the user to manually configure which interface to listen on. On Unix, I can obtain the right network interface (en0, en1, etc.) via a call to ifconfig and some parsing of the output, but I cannot locate any equivalent Windows API or command that can yield similar information--ipconfig doesn't seem to obtain this data. Can anyone suggest either a Windows command-line tool or an API that can be called via VBScript to obtain this data so that I don't have to present the user with a dialog in my GUI telling them to select the right interface?

    Read the article

  • Extremely high mysqld CPU usage with no active queries

    - by RadarNyan
    I have a VPS running Ubuntu 12.04 LTS with LEMP stack, followed the guide from Linode Library (since I'm using a Linode) to setup, and everything worked fine until now. I don't know what's wrong, but my CPU usage just goes up since a week ago. Today things getting really bad - I got 74% CPU usage so I went check and found that mysqld taking too much CPU usage (somewhere around 30% ~ 80%) So I did some Google Search, tried disable InnoDB, restart mysql, reset ntp / system clock (Isn't this bug supposed to happen more than a year ago?!) and reboot my VPS, nothing helped. Even with mysql processlist empty, I still get mysqld CPU usage very high. I don't know what I missed and have totally no idea, any advice would be appreciated. Thanks in advance. Update: I got these from running "strace mysqld" write(2, "InnoDB: Unable to lock ./ibdata1"..., 44) = 44 write(2, "InnoDB: Check that you do not al"..., 115) = 115 select(0, NULL, NULL, NULL, {1, 0}^[[A^[[A) = 0 (Timeout) fcntl64(3, F_SETLK64, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}, 0xbfa496f8) = -1 EAGAIN (Resource temporarily unavailable) hum... I did tried to disable InnoDB and it didn't fix this problem. Any idea? Update2: # ps -e | grep mysqld 13099 ? 00:00:20 mysqld then use "strace -p 13099", the following lines appears repeatedly: fcntl64(12, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, NULL}, [2]) = 14 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, [30]) = 0 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0", 8) = 0 fcntl64(14, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0xb786a584, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb786a580, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0xb7869998, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=12, revents=POLLIN}]) er... now I totally don't get it x_x help

    Read the article

  • ftp connection problem, vsftp server, active mode

    - by Mark Szente
    I have a server that runs vsftpd to handle ftp connections. One of my users have a notebook with Total Commander and WinSCP installed. Both ftp clients fail right after the connection is established to the server and it tries to download the directory listing with the following error message: Timeout detected. Could not retrieve directory listing PORT command successful. Consider using PASV. Error listing directory '/'. The weird thing is: the notebook works perfectly ok with other ftp servers. My ftp server also works well with other clients. In fact, this user also has a pc running on the same LAN as the notebook and the pc works well with the ftp server. We use PORT ftp connection mode. Passive mode works well but is not an option at this point. I would post more technical details but I don't even know what this problem is related to. Anyway, below is the server side tcpdump for the failed connection attempt. There's no further communication between the client and the server after the last line of log. Thank you very much for any hint! 23:39:24.514852 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: S 1314489715:1314489715(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,sackOK> 23:39:24.514896 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: S 2633658883:2633658883(0) ack 1314489716 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 2> 23:39:24.520842 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 1 win 62500 23:39:24.523803 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 1:21(20) ack 1 win 1460 23:39:24.546858 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 1:15(14) ack 21 win 62497 23:39:24.546902 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 15 win 1460 23:39:24.547247 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 21:55(34) ack 15 win 1460 23:39:24.762806 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 55 win 62493 23:39:30.415011 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 15:28(13) ack 55 win 62493 23:39:30.454116 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 28 win 1460 23:39:31.036283 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 55:78(23) ack 28 win 1460 23:39:31.053018 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 28:34(6) ack 78 win 62490 23:39:31.053042 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 34 win 1460 23:39:31.053268 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 78:97(19) ack 34 win 1460 23:39:31.068969 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 34:40(6) ack 97 win 62488 23:39:31.069148 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 97:112(15) ack 40 win 1460 23:39:31.069179 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 112:119(7) ack 40 win 1460 23:39:31.076981 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 119 win 62485 23:39:31.077010 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 119:177(58) ack 40 win 1460 23:39:31.114979 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 40:45(5) ack 177 win 62478 23:39:31.115164 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 177:186(9) ack 45 win 1460 23:39:31.180966 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 45:53(8) ack 186 win 62476 23:39:31.181066 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 186:216(30) ack 53 win 1460 23:39:31.213065 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 53:80(27) ack 216 win 62473 23:39:31.213180 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 216:267(51) ack 80 win 1460 23:39:31.251086 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 80:86(6) ack 267 win 62466 23:39:31.251498 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054371220 0,nop,wscale 2> 23:39:31.290979 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 86 win 1460 23:39:34.251489 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054374220 0,nop,wscale 2> 23:39:40.249625 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054380220 0,nop,wscale 2> 23:39:43.695108 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: P 2280716551:2280716588(37) ack 3838413728 win 5840 23:39:52.248791 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054392220 0,nop,wscale 2> 23:40:16.245159 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054416221 0,nop,wscale 2> 23:40:29.853685 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: FP 37:51(14) ack 1 win 5840 23:40:31.241951 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 267:304(37) ack 86 win 1460 23:40:31.381708 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 304 win 62462

    Read the article

  • Active Directory VBS Script for Auditing a Presentation

    - by Steven Maxon
    Can anyone help me with this VBS script? Thanks in advance. User logs in to a XP computer and a PowerPoint presentations or web page starts They read through the presentation and then click a links that says: “Click here to complete presentation”. When they click the link it will send their username and time/date stamp to a text file on a server. The next time they log in they will not get the PowerPoint or web page presentation.

    Read the article

  • How to install Active Directory Users and Computers for Windows 2008

    - by Mark Arnott
    I want to install the administration tools on a Windows Server 2008 (R1) machine. On Windows 2003 you installed adminpak.msi, but I can't find such a file for 2008. Is this a "feature" in Server Manager? If so what is it named? ---UPDATE--- So I drilled into the server Features list and I have "Remote Server Administration Tools" but it only includes File Services, Print Services and Web Server. This is a member server in a domain but not a domain controller. It is Windows 2008 (original) not R2. Still, why can't it run AD users and computers from this machine?

    Read the article

  • CentOS 6.5 new Kernel not active after reboot

    - by Kristofer
    Today I was running some yum updates and wanted to verify that everything went through fine by making sure I had a new kernel. To my surprise I noticed that CentOS was still running 2.6.32-431.5.1.el6.x86_64 even though it looked as though 2.6.32-431.23.3.el6 was installed. Indeed 2.6.32-431.23.3.el6 shows up in /etc/grub.conf but not in the upstart boot options. Any ideas why? In the update log it says: ---> Package kernel-firmware.noarch 0:2.6.32-431.5.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-431.23.3.el6 will be an update Could this be the reason? What does "will be an update" mean? My /etc/grub.conf: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup00-root # initrd /initrd-[generic-]version.img #boot=/dev/vda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu password --encrypted $1$auui(i$sODM4ni/Zts9IlMWu.wWF/ title CentOS (2.6.32-431.23.3.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.23.3.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.23.3.el6.x86_64.img title CentOS (2.6.32-431.5.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.5.1.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.5.1.el6.x86_64.img title CentOS (2.6.32-431.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.el6.x86_64.img

    Read the article

  • Active Directory management with low user rights

    - by DemonWareXT
    Our problem: The client, a normal user, has to be able to reset multiple passwords at once. Around 30 in one go. This would call for powershell or something along these lines, but for AD and Powershell one needs to be domain administrator. My solution would be to make a service that runs on the AD server and take connections from a program. The service would then do the AD changes. So far so good, I would just like to hear some other thoughts on this problem. Because I sure can't be the only one with it

    Read the article

  • Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

    - by casualuser
    I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

    Read the article

  • printer assignments for windows xp workstations within an active directory environment

    - by another_netadmin
    I'm using the following script to handle removing any old networked printers from machines and then assigning the propper ones and making one of them the default. This script is assigned to the OU the workstations reside in and uses group policy loopback so all users that login will get the appropriate printers mapped for them. I tried to use the new Printer Manager as part of W2K3 R2 but when assigning the default this way I get an error that the printer doesn't exist so I'm back to using the script. One flaw that I'm noticing is that it won't remove any printers that happen to be mapped from an RDP session (we don't see this everywhere but there are a few locations). Is there any way to enumerate all RDP printers and remove them similar to how I'm enumerating and removing networked printers? ' ' Printers.vbs - Windows Logon Script. ' RemovePrinters AddPrinters Sub RemovePrinters() On Error Resume Next Dim strPrinter Set objNetwork = WScript.CreateObject("WScript.Network") Set colPrinters = objNetwork.EnumPrinterConnections For i = 0 to colPrinters.Count -1 Step 2 strPrinter=CStr(colPrinters.Item(i+1)) If Not InStr(strPrinter,"\\") = 0 Then objNetwork.RemovePrinterConnection strPrinter, True, True End If Next End Sub Sub AddPrinters() On Error GoTo 0 Set objNetwork = CreateObject("WScript.Network") objNetwork.AddWindowsPrinterConnection "\\printers1\JH120-DELL5310" objNetwork.SetDefaultPrinter "\\printers1\Jh120-DELL5310" End Sub

    Read the article

  • Synchronizing the SamAccountName Property using Windows Azure Active Directory Sync Tool

    - by pk.
    Using this official documentation as a guide, I would expect the SamAccountName property to sync from my on-premise AD to Office 365. I think that it used to do exactly that, but now it seems that it doesn't so much sync the attribute as it does create an entirely new, unlinked value and store it in Office 365. This has caused some minor issues for me (broken scripts, annoying permissions management, etc.) and may be part of a more major issue regarding ADFS authentication. On-Premise PS C:\Windows\system32> Get-ADUser jdoe -Properties SamAccountName | fl SamAccountName SamAccountName : jdoe Office 365 Sync'ed Objects PS C:\Windows\system32> Get-Mailbox jdoe | fl SamAccountName SamAccountName : $1A7H20-K1LCOJFFBHGS I understand how to work around this issue in my scripts -- there exists the ImmutableId property which can be mapped back to the on-premise GUID. As far as the issue I'm having with ADFS, I'm less certain how to proceed and if this is causing my issues. At this point I really would just like some verification that I'm not crazy and that this used to be sync'ed at some point in the past and that Office 365 broke it relatively recently. I also think that MS documentation should perhaps be updated to exclude SamAccountName from the list of synchronized properties on the page I linked.

    Read the article

  • SSH disconnects active session after 20 minutes

    - by Paramaeleon
    I’ve just set up a new Linux box (OpenSuSE 12.3 on VmWare). Now I stated that my SSH shell sessions are disconnected exactly after 20 minutes, clearly with activity. (Putty: “Network error: Software caused connection abort”) I already set Putty to send keep alives every 64 sec. In sshd_config, I set ClientAliveInterval 50 ClientAliveCountMax 2 and did a deamon reload. Didn’t help. About two minutes after the link breakdown, ssh reports to /var/log/messages: … … sshd[…]: Timeout, client not responding. … … sshd[…]: pam_unix(sshd:session): session closed for user root I don’t encounter this behaviour when connecting to other virtual machines, so I guess the problem isn’t in the network. Any help is appreciated.

    Read the article

  • Why "scope link" ipv6 address can be pinged via interfaces which they are not active on

    - by olagu
    [root@2_01 ~]# /sbin/ip -6 addr show pubeth0 inet6 2001:1::6/64 scope global inet6 2001:1::1/64 scope global inet6 fe80::20c:29ff:fe69:f9e8/64 scope link [root@v2_01 ~]# /sbin/ip -6 addr show pubeth1 inet6 fe80::20c:29ff:fe69:f906/64 scope link [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth1 PING fe80::20c:29ff:fe69:f9e8%pubeth1(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.259 ms --- fe80::20c:29ff:fe69:f9e8%pubeth1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 286ms rtt min/avg/max/mdev = 0.259/0.259/0.259/0.000 ms [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth0 PING fe80::20c:29ff:fe69:f9e8%pubeth0(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.057 ms --- fe80::20c:29ff:fe69:f9e8%pubeth0 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 390ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms Why can I ping6 "fe80::20c:29ff:fe69:f9e8" via pubeth1?

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >