Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 60/311 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

    - by Tom
    Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

    Read the article

  • Need to upgrade DDR2 RAM on HP Desktop

    - by jds
    I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

    Read the article

  • Computer always freezing after random periods of time. No errors listed.

    - by Wesley
    Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

    Read the article

  • Is it better to always purchase as much as higher in Watts SMPS, for PC?

    - by metal gear solid
    Is it better to always purchase as much as higher in Watts SMPS, for PC? Does higer watts SMPS also consume more power (electricity bill)? How to know how much watts of SMPS we should purchase? What are factor who decide how much watt of power will need? I'm going to purchase a new Motherboard + CPU + HDD + RAM + DVD Wrtiter + SATA 500 GB HDD ? I'm not purchasing any external Graphic Card. How to decide which watt of SMPS ,I should purchase?

    Read the article

  • Recommendations for stable, reliable flash drives

    - by Josh Kelley
    We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

    Read the article

  • System beeps continuously if both RAM sticks inserted

    - by JGB146
    I have two sticks of OCZ 2GB PC2 9600 RAM. When I attempt to boot with both sticks inserted, I am met with a continuous string of system beeps (and no bootup). The system boots fine when only one stick is inserted, but obviously that leaves me with less RAM than I'd like to have. What could the problem be? System specs are: Gigabyte GA-EP45-UD3L Intel Core 2 Quad Q9400 Sticks of OCZ 2GB PC2 9600 RAM Zotac GeForce GTS 250 1GB 2x Seagate 500GB SATA HDs

    Read the article

  • Why didn't cable select work?

    - by jldugger
    I got roped into doing tech support for a friend of the family. Obviously I'd already failed to hide my powers, ala Penny Arcade. Anyways, the guy bought a DVD burner OEM from Microcenter, and asked me to install it. So I stopped by before and thought I'd be slick and use Cable Select on the jumpers. I didn't get a chance to test it before it I had to leave, and it seems that this didn't work. I came back this week to investigate, and he explains he's confused how none of the software he downloaded was able to burn. So on a whim I switch it to explicit master / slave, and it starts working fine. Whoops. Well, at least it's not the extra crap he found and downloaded for free from the internet. Why doesn't setting both jumpers to Cable Select solve this?

    Read the article

  • Problem whit usb wireless mouse

    - by aiacet
    Recently i have thi problem whit my wireless mouse (Trust model on: www.trust.com/15313). Sometimes when i start the Pc or during a game the pointer/arrow stop to move it. In the Pc start the pointer is blocked on the center of the screen. If I'm lucky i have to chance the USB wirless adapter from port 1 to port 2 but sometimes this trick doesn't work i to use the mouse i have to restart. Like you can see in the productor webpage this mouse don't have the direver but only a tool to solve some problem. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

    Read the article

  • Laptop turns off after 20 minutes of use

    - by Christoph
    My laptop a sony vaio VGN-NW11S http://www.trustedreviews.com/Sony-VAIO-VGN-NW11S-S---15-5in-Laptop_Laptop_review. Everytime i turn it on, in safe mode or not, if i try to open an application i.e. run a process such as google chrome or event viewer, defrag, virus scan, it completely turns off without warning, nor giving a trace of events the next time I switch it on. Apart from that, I had worries it might be my battery or power supply but I dont think it is that, I took the laptop apart cleaning fans etc. and have ordered some cpu paste as I checked to see the condition of the processor. I will post to see if re-applying the paste works. One more thing, when the heavy processes kick in, the fan starts to make a lot of noise, maybe trying to cool down the CPU? Any ideas on what else it could be and what I could do to test what is wrong?

    Read the article

  • What are these? Are they broken?

    - by Chris Nielsen
    Please excuse the poor image quality: What are the components that I've circled in red? The ones on the left look whole and solid. The ones on the right have cracked tops, and although this picture doesn't show it, there are small brown threads coming out of the top. Are the cracked ones broken, or is that supposed to happen? If they ARE broken, is this something I should worry about? This is a video card, and it appears to be fully functional: I'm using it while writing this post.

    Read the article

  • RAM module randomly stopped working

    - by nhinkle
    My laptop is a Dell Inspiron e1505. It came with 2x512 MB of RAM installed, and about a year and a half ago I decided to upgrade it to 2x1 GB. I bought two 1GB memory modules from newegg and installed them, and all worked fine. Just last night my laptop was working fine; this morning I booted up and there was a BIOS warning saying "amount of system memory has changed". I tried reseating the modules, but that didn't fix it. Then I removed each one individually, and determined that one of the sticks appears to no longer be working. This happened very abruptly - I hadn't noticed any problems which might have been indicative of impending failure. Does anybody have any clue what may have caused this, and if there's any hope of making it work again? The memory only had a 30 day warranty, so I can't RMA it.

    Read the article

  • Recommending simple appliance for DansGuardian, iptables, snort inline

    - by SRobertJames
    I'm currently using a Linksys E2000 with dd-wrt. I'd like to add DansGuardian for Content Filtering and snort-inline for IPS; but those require a more powerful box (mainly, more storage). Can you recommend a good device to use? I'm open to both overwrite-the-firmware (like dd-wrt) and designed-to-be-customized boxes. Requirements: 1. 5+ Ethernet ports, pref. GigE 2. small form factor 3. No noise (office environment) 4. low power 5. Not sure about 802.11 wireless Budget < $400, pref. less.

    Read the article

  • Is this hard disk dead?

    - by Korjavin Ivan
    Not sure, is this right site for this Q, but let me try Last time i have problem with hard disk. Sometimes its do strange sound, and i get it from logs: $dmesg | grep ata4 [29409.945516] ata4.00: exception Emask 0x10 SAct 0xf SErr 0x90202 action 0xe frozen [29409.945529] ata4.00: irq_stat 0x00400000, PHY RDY changed [29409.945538] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B } [29409.945546] ata4.00: failed command: READ FPDMA QUEUED [29409.945562] ata4.00: cmd 60/30:00:56:22:5f/00:00:00:00:00/40 tag 0 ncq 24576 in [29409.945573] ata4.00: status: { DRDY } [29409.945580] ata4.00: failed command: READ FPDMA QUEUED [29409.945594] ata4.00: cmd 60/18:08:8e:22:5f/00:00:00:00:00/40 tag 1 ncq 12288 in [29409.945605] ata4.00: status: { DRDY } [29409.945611] ata4.00: failed command: READ FPDMA QUEUED [29409.945625] ata4.00: cmd 60/08:10:46:02:66/00:00:00:00:00/40 tag 2 ncq 4096 in [29409.945635] ata4.00: status: { DRDY } [29409.945641] ata4.00: failed command: READ FPDMA QUEUED [29409.945656] ata4.00: cmd 60/80:18:ee:04:66/00:00:00:00:00/40 tag 3 ncq 65536 in [29409.945666] ata4.00: status: { DRDY } [29409.945679] ata4: hard resetting link [29413.976083] ata4: softreset failed (device not ready) [29413.976097] ata4: applying SB600 PMP SRST workaround and retrying [29414.148070] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [29414.184986] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [29414.243280] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [29414.243292] ata4.00: configured for UDMA/133 [29414.243324] ata4: EH complete [680674.804563] ata4: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen [680674.804575] ata4: irq_stat 0x00400000, PHY RDY changed [680674.804584] ata4: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [680674.804603] ata4: hard resetting link [680678.840561] ata4: softreset failed (device not ready) Is this ata4 sata hard drive dead? Must i change it ASAP ? Need I specify more info?

    Read the article

  • Can I directly open an MMF Cash Drawer through RJ-11 port?

    - by roviuser
    My aunt bought this cash drawer at an auction recently and has tasked me with figuring how to open it via a computer. We have the key (pictured) and can open it manually, but I'd like to be able to plug it directly into a computer and open it via some sort of program or script. It has a built in rj-11 cord coming out of the back of it. Initial research shows that it might usually be used with a printer, but I want to be able to connect it directly to the computer. Edit: this needs to be able to work with windows 7. Edit2: http://imgur.com/a/czEMs imgur gallery of the innards.

    Read the article

  • Computer won't start unless power is removed for ~5 minutes

    - by Paul Tarjan
    I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

    Read the article

  • Linux Live CD for old computer

    - by Joel Coehoorn
    I have a pentium II (that's right, pentium II) with a scant 200MB of ram. This was a high-end workstation in it's day. The machine currently runs dos on a raid array, and I need to pull some data from it. I figure my best chance at this is to use a linux live cd to copy the data to one of our active directory network shares (there is a network card in the machine). Unfortunately, my linux skills are abysmal, so I'm not sure where to get started: Where should I look to find a linux cd that will run well on such an old system Since I'm likely gonna need to be command-line only, what do I need to do to configure the network card and mount the network share via the command line? Bonus points: exact syntax needed to copy and convert the entire volume for use in VMware server 2.0, but really just copying all the data should be enough.

    Read the article

  • Hard Drive Fundamentals And Verifying Disk Performance

    - by Agnel Kurian
    Over the past few months, my Windows XP machine has slowed down to a crawl. It takes about 10-15 minutes to go from power-up to reaching a responsive state. I have reasons to believe that this is a result of the hard disk slowing down. Questions: Do hard disks slow down as a result of mechanical wear and tear ...or age? How do I check if my disk has slowed down? Conversely, how can I verify that my disk is indeed running at the speed it's designed to run at? Could drivers be at fault here? Do hard disks come with drivers or does Windows use a generic driver?

    Read the article

  • unable to recover data from failed hdd

    - by Eslam Elyamany
    my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xe9fb38fb Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 40959999 20376576 7 HPFS/NTFS/exFAT /dev/sda4 40962046 976771071 467904513 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 82913280 86910975 1998848 82 Linux swap / Solaris /dev/sda6 86913024 394113023 153600000 7 HPFS/NTFS/exFAT /dev/sda7 40962048 82913279 20975616 83 Linux /dev/sda8 394122708 976768064 291322678+ 7 HPFS/NTFS/exFAT Partition 8 does not start on physical sector boundary. no sdc appears here , BUT it's appears on /dev/ rootghost-lap:/home/ghost# ls /dev/sd* /dev/sda /dev/sda2 /dev/sda5 /dev/sda8 /dev/sdb /dev/sdc1 /dev/sdc2 /dev/sdc6 /dev/sdc8 /dev/sda1 /dev/sda4 /dev/sda6 /dev/sda9 /dev/sdc /dev/sdc10 /dev/sdc5 /dev/sdc7 /dev/sdc9 also it appears in proc Code: rootghost-lap:/home/ghost# cat /proc/partitions major minor #blocks name 8 0 488386584 sda 8 1 102400 sda1 8 2 20376576 sda2 8 4 1 sda4 8 5 1998848 sda5 8 6 153600000 sda6 8 8 291322678 sda8 8 9 20975616 sda9 11 0 1048575 sr0 11 1 99136 sr1 8 32 244198583 sdc 8 33 14651248 sdc1 8 34 1 sdc2 8 37 15380480 sdc5 8 38 4153344 sdc6 8 39 48829536 sdc7 8 40 48829536 sdc8 8 41 110374551 sdc9 8 42 1975963 sdc10 and dmesg : [10604.777168] end_request: I/O error, dev sdc, sector 1 [10604.817238] sd 26:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10604.817243] sd 26:0:0:0: [sdc] Sense Key : Aborted Command [current] [10604.817248] sd 26:0:0:0: [sdc] Add. Sense: No additional sense information [10604.817253] sd 26:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 02 00 00 06 00 ok now , let's see what i've tried testdisk to check for partitions -- failed dd to copy data from /dev/sdcX -- provide strange output size for example /dev/sdc1 is about 15G , the output for dd is 62G+ so i had to cancle it safecopy successfully made an image for partitons , but can't fix images, can't mount it, can't do any thing with it and some other tools i've tried and all failed , so any idea ?

    Read the article

  • How to create a separated network to customers only?

    - by Valter Henrique
    I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >