Search Results

Search found 3881 results on 156 pages for 'pointing stick'.

Page 60/156 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Is it common to have portable hard drive not recognize?

  - by lamwaiman1988

  I have a bad hard drive which could not be recognized by windows. If windows can recognize it, it could just be pure luck. There are better chance of it being recognize by plugging it at the usb back of the machine, rather than the front one. More interestingly, I have a usb cable which fork itself at one side ( i.e it has 2 heads at one side ). I can plug both heads to the machine and connect the portable hard drive on the other end of the usb cable? Can I get more voltage by doing this? I am guessing the front usb port doesn't have enough power. I am wondering if I buy a new portable usb hard drive, would it have easy read by plugging at the front usb port? I am not sure if I screw up the jumper connecting the front usb ports, but it is okay for other device such as usb stick and mouse.

  Read the article

• Can I use MX records to deliver some addresses to Google Apps and some to my server?

  - by Josh

  I have whm installed on my VPS, which my domain MX records are pointing to: 0:mail.mydomain.com and whm/cpanel has mail forwarding rules which pipes certain @mydomain email addresses into my CRM software. But for certain email addresses I want to forward into Google Apps. For example, [email protected], [email protected] pipes into cPanel -- CRM (mail.mydomain.com) but [email protected] should be going to Google MX records. Is that possible? The reason why is I want to register for Google Apps such as analytics and other Google services under [email protected]. My initial thoughts were to add a subdomain such as [email protected] and point that subdomain's MX records to Google.. but I want to avoid this if possible.

  Read the article

• Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

  - by Liam

  I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

  Read the article

• Install Windows 7 x64 from a separate partition on same hard drive (no DVD/USB)?

  - by Fraser

  I'm currently running Windows XP 32-bit, and want to install Windows 7 64-bit. However, my DVD drive is broken, and the only USB sticks I have lying around are USB 1.1 only (SLOW!). So I tried (as suggested would work for a USB stick by several online guides): Created new primary partition (formatted NTFS) Set that partition as active Copied contents of Win7 x64 ISO Downloaded the 32-bit bootsect.exe Ran bootsect /nt60 F: However, when I boot into the new partition, I only see a blinking cursor on a blank screen; nothing happens. Any ideas?

  Read the article

• Exchanged HDD in MacBook Pro - OSX installation disk shows prohibitory sign

  - by Hedge

  I exchanged the HDD in my 2007 MacBook Pro and removed the dvd-drive because it was making terrible noise everytime I booted the MacBook. The new HDD is a Corsair Force F120 SATA SSD. Everytime I try to launch an OSX Lion installation disk or USB stick I get the grey prohibitory sign and the machine shuts down after a while. Since I didn't format the SSD beforehand there is still Windows 7 on it. It shows the white progress bar with the message "Windows is loading files" but never finishes it. I don't want Windows on that machine, just thought this fact may be important. Any ideas what is wrong?

  Read the article

• Solaris Administration Web GUI?

  - by Robert C

  I recently installed Solaris 11 x86 text install (http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen) to be used as a file server running ZFS. I noticed that I'm given the bare minimum in terms of packages. Is there an official oracle web GUI for managing ZFS? I ran a netstat and it doesn't appear to have installed any webserver thats listening. I saw something from a couple years ago, but apparently it's not packaged or maintained anymore (https://blogs.oracle.com/talley/entry/manage_zfs_from_your_browser). I tried pkg install network-console, but it says that the package isn't available for my platform. Any ideas? I'd like to stick with Oracle Solaris instead of the open source alternatives, if possible.

  Read the article

• How to make a pxe bootable 10MegaByte or larger dos image?

  - by rjt

  Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

  Read the article

• How to setup a new website with Amazon EC2?

  - by ElHaix

  For a new EC2 instance, I setup a windows server with IIS. I added the Amazon name servers to my on my domain, and configured an elastic IP pointing to the server. I know this is working as I use this for RDC. On the server, I added the website tied to the IP address, and used the quicklink security group that has port 80 open. However, whenever I try going to the URL, I pretty much get nothing, and not sure where the blockage is occurring. Any suggestions? Thanks.

  Read the article

• Setting Up Multiple Domains (plus wildcard subdomains) to Point to the Same Site/VirtualHost

  - by Derek Reynolds

  I have my primary domain with wildcard subdomains setup already. username.maindomain.com and maindomain.com I want to provide my users with additional domains that they can select. additional1.com, additional2.com, additional3.com... These additional domains would also need to support wildcard subdomains (as the subdomains route to a username). Anyone know how to properly configure this in DNS and VirtualHost config? Currently I have the additional domains as A records pointing to the same IP as my main domain (with a wildcard subdomain A record for each as well). In my VirtualHost config I am placing the additional domain names in the ServerAlias directive. Let me know if any more detail is needed.

  Read the article

• Spoofing domains - using one domain to look at another without frame redirect

  - by hfidgen

  Hiya, In Plesk 9.2.2 does anyone know how the following can be achieved? I've got domain1.co.uk registered in plesk, but the domain has not been set up with any nameservers or A records, so it is unreachable from the web. However, I need to test it while we get the domain1.co.uk nameservers etc sorted over the next week or so. SO, i've got sparedomain.co.uk registered, with the nameservers and A records pointing to the server, and sure enough it displays the default plesk "theres no website here yet page" . bingo. Now, how can I set up sparedomain.co.uk on my plesk server, so it displays all the data held on the plesk account for domain1.co.uk? Frame forwarding doesnt work - because you get errors saying "domain1.co.uk cannot be found" in your browser - i need a server solution to spoof it all. Anyone got any ideas? Thanks!

  Read the article

• Error installing Arch Linux

  - by Garethj94

  So, I am trying to install Arch Linux on my Acer Aspire 4830tg, but I keep running into problems. Some background knowledge, I am trying to install Arch off a usb stick and I got the iso image using bittorrent. I am also trying to install it alongside of Windows 8 (which is already installed). So when I boot into Arch linux I get this error: :: Mounting '/dev/disk/by-label/ARCH_201212' to 'run/archiso/bootmnt' Waiting 30 seconds for device /dev/disk/by-label/ARCH_201212 ... ERROR: '/dev/disk/by-label/ARCH_201212' device did not show up after 30 seconds... Falling back to interactive prompt You can try to fix the problem manually, log out when you are finished sh: can't access tty; job control turned off I know that it will work if I run it on a virtual machine but whenever I try to install it on my laptop I keep getting this error. And since you can't register for the Arch forums without a Arch terminal to run their captcha command I can't ask this on their forums.

  Read the article

• Ubuntu 10.04 LTS - good enough to jump on it?

  - by iconiK

  I'm currently planning to get a VPS from VPS.net for a PHP project. I personally haven't used CentOS (which is recommended all the time) and this is not a good time for me to start learning it, so I want to stick with Ubuntu, as that's the one I have experience with. Now there's the good ol' 8.04 LTS that's well supported, however, 10.04 LTS was released two days ago. I installed it on my laptop and it is pretty slick (doesn't matter for a server) and quick. But I am skeptical about it: Has anyone tried it in a production environment so far? How does it perform versus 8.04? Any serious bugs so far?

  Read the article

• Python version priority in OSX/UNIX PATH environment variable

  - by mindthief

  Hi all, I want my system to use /usr/bin/python, but it's currently using /opt/local/bin/python, which points to /usr/bin/python2.6. I tried modifying the PATH variable in my .bashrc as PATH=~/bin:$PATH ...and then set a symbolic link in ~/bin to point to /usr/bin/python. i.e. ~/bin/python --> /usr/bin/python I figured this might prioritize this symlink over the /opt/local version if it came before the other one in the PATH variable, but when I opened a new shell I still found python pointing to /opt/local/bin. Any advice on a good way to get the system to use /usr/bin/python? Also, I usually use ipython as opposed to python directly. I'm assuming that if the system starts to use the correct version of python then ipython would also use that version? If not, how could I also get ipython to use the correct version? Thanks!

  Read the article

• Windows 8 Restore Problems

  - by Joe

  I created a Windows 8 system image backup on a separate drive before I installed Linux, and during the Linux installation process I accidentally wiped out Windows. I now want to restore my Windows 8 backup that I have on the separate drive. I created a repair USB stick and I followed the directions according to this article. After selecting the image on the hard drive, I get this error: "To restore this computer, Windows needs to format the hard drive." I don't know what this means! The drive partitions are different now then they were when I backup up, so I don't know if that matters. I re-installed Windows and I can restore my files from this backup, but I don't think this covers the registry, etc. I want a full restore. Does anyone know how to fix this problem, or how to restore in a different way? Thanks!

  Read the article

• Win7 MCE seems unable to play ripped DVDs

  - by ilivewithian

  I'm running Windows 7 and am using mymovies.dk to rip the dvds to my harddrive. However, playback isn't watchable as the picture is very stuttery and blocky, only shots that show the same image for a few seconds get shown properly. The dvd's are ripped as the straight folder structure and if played in XBMC are fine. I've tried installing both the cccp-project.net and latest div-x codecs, but that doesn't seem to have helped. I'd like to stick with MCE as it has a high WAF (wife acceptance factor). Any suggestions?

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• few questions on making a flash drive to a hard drive

  - by user23950

  I've found a tutorial here on how to trick the operating system to see a flash drive as a hard drive. http://www.getusb.info/usb-hack-turn-a-usb-stick-into-a-hard-drive-or-local-disk/ But I have a few questions: This trick will only work on the os wherein you updated the flash drive driver. Is there a trick that will work like this one, but if you plug in the flash drive to another computer it will still be treated as hard drive? How do I convert it back to a flash drive?

  Read the article

• Cannot Get Sound Over HDMI in Windows 7

  - by Aayush

  Windows 7 has been really good to me, I never needed to install any drivers & that included sound. Win7 took care of all that, but because of that I don't have any extra controls. Just the native Windows sound controls. I connected my LCD and PC using the HDMI, works great with video but the sound seems to stick with the PC speakers. My friend somehow solved this in Vista, but to port the sound to the LCD, he always had to restart the computer, which I found really weird and never made me interested to even know how he did that. There has to be way to do this easily. Please let me know if anyone else had the same problem & solved it somehow. Thanks!

  Read the article

• Converting my PC to a server

  - by Sean87

  I live in a university campus and luckly I have super fast internet in my room, with a static IP address. I tried to setup XAMPP and by pointing to my IP address from anywhere I can access the services running on my PC. Now I am thinking of hosting my own website on my own PC. I am not sure what else I will need (beside the static IP) to make this happen (if it is possible at all). I am running Windows 7 ultimate and of course I do have a domain registered. What should I point my domains DNS names to make this happen (I assume it is far more steps involved!)

  Read the article

• No GUI after upgrade to Ubuntu 9.10 (boots to command line)

  - by Gathris

  I have just upgraded to Ubuntu 9.10 (network upgrade using the update manager, from 9.04 which had different graphics related problems) and when I try to boot into it all I get a small Ubuntu logo, flickering text and then the tty1 command line with a logon prompt. startx gives following error: Fatal server error: no screens found I traced down a tutorial that said I needed the latest graphics drivers (Gigabyte ATI Radeon 4650 HD installed with 9.10 catalyst drivers) so I did using the 'sh' command and a USB stick (I have a working Windows partition) and it installed fine but did not fix the problem. Edit: Thanks to UK and Arjan van Bentem below I was able to understand the full error message of start x: Parse error on lone 2 of /etc/X11/xorg.conf 'nameserver' is not a valid keyword in this section Fatal server error: no screens found This has nothing to do with a graphical error (sorry if I misled anyone) but the xorg.conf file has 3 lines in it and lines 2-3 have an entry 'nameserver'. Using the nano command I commented out (using a # before the entries) the nameservers and can now boot Ubuntu. Thanks to everyone for their help.

  Read the article

• What should be taken into consideration when deploying Windows 8 in a domain environment?

  - by GaTechThomas

  Edit: Reformulating the question: We have ordered new laptops but before they arrive, our development team is trying to decide whether to install Windows 8 or stick with Windows 7. We have already tested on isolated machines, but we have not yet been allowed to add the machines to the domain. Before we approach the networking group to discuss adding Windows 8 machines to the domain, we need more information on what changes / issues to expect in moving from Windows 7. Are there any aspects we should consider that are specific to Windows 8 clients? Thus far, I've gotten the following feedback: Windows Administrative Shares are disabled New set of Group Policy templates Changes to proxy server settings Additional items along these lines would be helpful. We're not looking for items related to Windows GUI changes, but instead primarily items related to having the machine live and be used on the domain.

  Read the article

• How can I prevent my volume from changing when initiating a Skype call?

  - by Daniel

  I already know about the option in Control Panel Sound Communications, so please don't bother pointing me there. I am using the Skype Modern UI app and whenever I start a call, it lowers the volume of anything else that I have active. How can I resolve this issue? Also, not sure if this is related, but any Modern UI music apps also lower their own volume when they are not in the foreground. This seems relevant: http://blogs.msdn.com/b/windowsappdev/archive/2012/08/23/media-playback-what-you-need-to-know-about-playing-media-to-make-your-app-shine-in-windows-8.aspx

  Read the article

• Enabled storing Bitlocker keys in Active Directory, is there a way to upload keys of drives encrypted before this?

  - by Rossaluss

  We have enabled storing of Bitlocker keys within the device object on Active Directory, however before this was implemented, we had encrypted 100+ devices using bitlocker and we've only found ways to upload the key to AD when enabling bitlocker for the first time on an install. Does anybody know of a way where we can upload all the keys for all the devices which already had their drives encrypted with Bitlocker into their respective device objects in AD? Or are we going to have to decrypt and re-encrypt all the devices on the floor? (Google seems to say this is what we're going to have to do, however we're no experts in Bitlocker, so may have missed something) When we go into Manage Bitlocker of an already encrypted device, we only get the same options of saving the key to a file, a memory stick or printing it out, no option is available to save to AD etc. Any help would be appreciated.

  Read the article

• Truecrypt or default Disk Utility on Mac?

  - by Kaushik Gopal

  Windows by default doesn't come with a password protect folder option (other that Win7 ultimate), so I used to swear by Truecrypt which was great. But I've read in a couple of places that Mac OS X by default has a way of protecting folders using the Default Disk Utility. So my question is which is better, using TrueCrypt on the Mac or just sticking with the default Disk Utils app? Can somebody let me know the advantages of one over the other? A summary from the very helpful answers below: if you're looking for cross-platform usage Truecrypt is the obvious tool of choice if you're looking for convenience, and intend to stick only to the Mac platform, use the default Disk Utils app.

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >