Search Results

Search found 59225 results on 2369 pages for 'windows edition'.

Page 60/2369 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Repairing Windows 7 boot after Ubuntu 10.10 install

  - by Ted

  I've read various threads on this after googling, including one on this site. I had Windows 7 installed on an SSD. I wanted to try Ubuntu so I created a partition for it on the SSD and booted with the live CD to install Ubuntu. Went through the install and somehow Ubuntu carved out another partition on the SSD rather than using the one I had already created. Windows 7 would then not boot but Ubuntu would. I booted with my 7 cd and ran the automatic startup repair, it didn't find any problems. I then ran the bootsect command on the drive with 7. It said it repaired the bootmgr but Windows still would not boot and now Ubuntu won't either. I read somewhere else that it may be due to the partition that 7 was on being changed during the install. I don't care about the Ubuntu installation but I don't want to lose the 7 install, can I delete the ubuntu partition through booting with the 7 cd? Will that do any good? Thank you all! I'm stumped even though I've done startup repairs before, just not after Ubuntu install.

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Z.

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Windows 7 using llt for ipv6

  - by Seoman

  The question asked below is based on the specific implementations of the Os not the RFC. Looking on a way to be able to assign a fixed ip address to a host, before it boots I found that Centos 6 works fine with no modifications and Windows 7 does not work at all. As defined in enter link description here exists 3 valid ways of generate a DUID: 1 Link-layer address plus time 2 Vendor-assigned unique ID based on Enterprise Number 3 Link-layer address Looking at the centos, that works fine, I can see the following autogenerated DUID: option dhcp6.client-id 0:1:0:1:19:60:25:f1:52:54:0:6b:b9:9e; and the MAC address for this host is: ifconfig eth1 | grep HWaddr eth1 Link encap:Ethernet HWaddr 52:54:00:6B:B9:9E As you can see, the DUID containts the MAC address. I can assign a fixed ip address to this host by including an entry on my dhcp server similar to: host vm { hardware ethernet 52:54:00:6B:B9:9E; fixed-address6 2001:db8:0:1::200; if packet(0,1) = 1 { log(debug,"VM Request match!"); } } And the Centos 6 gets his ip. On the windows side, I faced a common problem explained on this other link enter link description here As summary, Win7 uses the option 2 of the DUID generation or a variation of this one. On the link explains how to move it to a llt (link layer + time) but is not working fine. If I modify the DUID to one that looks like the one generated on Centos (but with the right MAC) it works as expected. Question 1 How Can I change the DUID generation for Windows 7 to be based on MAC as Centos 6 does? Thanks

  Read the article

• Searching SharePoint site with Windows Explorer

  - by alexsome

  Every week, I manually backup recent versions of the files on my group's SharePoint site. I open the library in Windows Explorer, search for all files modified in the past week, then copy and paste them to a network location. We need this process because our SharePoint site has a quota that we would easily meet if we had unlimited versions, so we keep a history of older versions on the network. Recently I got an upgrade to my work computer and I am unable to search the site using Windows Explorer. When I run the search for files modified in the last week no results are returned. If I run a search with no criteria on the file library, all the files are found but the "modified on" field is blank. So the search results only have the file and type fields. The new computer has Windows XP, just like the old one did. I hope this makes sense. Does anyone have any clue what the problem could be? I'd be happy to provide more info if necessary. It's bugging me to no end and I'm not even sure where to begin looking - it's either a trivial issue or a very obscure one. Thanks a lot.

  Read the article

• No "New Folder" button in windows 7

  - by user1125620

  My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

  Read the article

• How can I change folder icon in Windows XP Home Edition?

  - by Eric

  In XP professional, it's REALLY easy to change folder icons: there's a button in the customize menu. However, I can't seem to set a folder icon in home edition: the button isn't there. Additionally, I can't seem to get a simple desktop.ini to do the trick either: [.ShellClassInfo] IconFile=icon.ico IconIndex=0 Is there something I've missed?

  Read the article

• Week in Geek: LastPass Rescues Xmarks Edition

  - by Asian Angel

  This week we learned how to breathe new life into an aging Windows Mobile 6.x device, use filters in Photoshop, backup and move VirtualBox machines, use the BitDefender Rescue CD to clean an infected PC, and had fun setting up a pirates theme on our computers. Photo by _nash. Weekly Feature Do you love using the Faenza icon set on your Ubuntu system but feel that there are a few much needed icons missing (or you desire a different version of a particular icon)? Then you may want to take a look at the Faenza Variants icon pack. The icons are available in the following sizes: 16px, 22px, 32px, 48px and scalable sizes. Photo by Asian Angel. Faenza Variants Random Geek Links Another week with extra link goodness to help keep you on top of the news. Photo by Asian Angel. LastPass acquires Xmarks, premium service announced Xmarks announced that it has been acquired by LastPass, a cross-platform password management service. This also means that Xmarks is now in transition from a “free” to a “freemium” business model. WikiLeaks reappears on European Net domains WikiLeaks has re-emerged on a Swiss Internet domain followed by domains in Germany, Finland, and the Netherlands, sidestepping a move that had in effect taken the controversial site off the Internet. Iran: Yes, Stuxnet hurt our nuclear program The Stuxnet worm got some big play from Iranian President Mahmoud Ahmadinejad, who acknowledged that the malware dinged his nuclear program. More Windows Rogues than Just AV – Fake Defragmenter Check Disk Don’t think for a second that rogues are limited to scareware, because as so-called products such as “System Defragmenter”, “Scan Disk” “Check Disk” prove, they’re not. Internet Explorer’s Protected Mode can be bypassed Researchers from Verizon Business have now described a way of bypassing Protected Mode in IE 7 and 8 in order to gain access to user accounts. Can you really see who viewed your Facebook profile? Rogue application spreads virally Once again, a rogue application is spreading virally between Facebook users pretending to offer you a way of seeing who has viewed your profile. More holes in Palm’s WebOS Researchers Orlando Barrera and Daniel Herrera, who both work for security firm SecTheory, have discovered a gaping security hole in Palm’s WebOS smartphone operating system. Next-gen banking Trojans hit APAC With the proliferation of banking Trojans, Web and smartphone users of online banking services have to be on constant alert to avoid falling prey to fraud schemes, warned Etay Maor, project manager for RSA Fraud Action. AVG update cripples 64-bit computers A signature update automatically deployed by the AVG virus scanner Thursday has crippled numerous computers. Article includes link to forums to fix computers affected after a restart. Congress moves to outlaw ‘mystery charges’ for Web shoppers Legislation that makes it illegal for Web merchants and so-called post-transaction marketers to charge credit cards without the card owners’ say-so came closer to becoming law this week. Ballmer Set to “Look Into” Windows Home Server Drive Extender Fiasco Tuesday’s announcement from Microsoft regarding the removal of Drive Extender from Windows Home Server has sent shock waves across the web. Google tweaks search recipe to ding scam artists Google has changed its search algorithm to penalize sites deemed to provide an “extremely poor user experience” following a New York Times story on a merchant who justified abusive behavior towards customers as a search-engine optimization tactic. Geek Video of the Week Watch as our two friends debate back and forth about the early adoption of new technology through multiple time periods (Stone Age to the far future). Will our reluctant friend finally succumb to the temptation? Photo by CollegeHumor. Early Adopters Through History Random TinyHacker Links Fix Issues in Windows 7 Using Reliability Monitor Learn how to analyze Windows 7 errors and then fix them using the built-in reliability monitor. Learn About IE Tab Groups Tab groups is a useful feature in IE 8. Here’s a detailed guide to what it is all about. Google’s Book Helps You Learn About Browsers and Web A cool new online book by the Google Chrome team on browsers and the web. TrustPort Internet Security 2011 – Good Security from a Less Known Provider TrustPort is not exactly a well-known provider of security solutions. At least not in the consumer space. This review tests in detail their latest offering. How the World is Using Cell phones An infographic showing the shocking demographics of cell phone use. Super User Questions See the great answers to these questions from Super User. I am unable to access my C drive. It says it is unable to display current owner. List of Windows special directories/shortcuts like ‘%TEMP%’ Is using multiple passes for wiping a disk really necessary? How can I view two files side by side in Notepad++ Is there any tool that automatically puts screenshots to my Dropbox? How-To Geek Weekly Article Recap Look through our hottest articles from this past week at How-To Geek. How to Create a Software RAID Array in Windows 7 9 Alternatives for Windows Home Server’s Drive Extender Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder? Ask the Readers: How Much Do You Customize Your Operating System? How to Upload Really Large Files to SkyDrive, Dropbox, or Email One Year Ago on How-To Geek Enjoy reading through these awesome articles from one year ago. How To Upgrade from Vista to Windows 7 Home Premium Edition How To Fix No Aero Transparency in Windows 7 Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista Rename the Guest Account in Windows 7 for Enhanced Security Disable Error Reporting in XP, Vista, and Windows 7 The Geek Note That wraps things up here for this week. Regardless of the weather wherever you may be, we hope that you have an opportunity to get outside and have some fun! Remember to keep sending those great tips in to us at [email protected]. Photo by Tony the Misfit. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• Week in Geek: FBI Back Door in OpenBSD Edition

  - by Asian Angel

  This week we learned how to migrate bookmarks from Delicious to Diigo, fix annoying arrows, play old-school DOS games, schedule smart computer shutdowns, use breaks in Microsoft Word to better format documents, check the condition of hard-disks using Linux disk utilities, & what the Linux fstab is and how it works. Photo by Jameson42. Random Geek Links Another week with extra news link goodness to help keep you up to date. Photo by justmakeit. Report of FBI back door roils OpenBSD community Allegations that the FBI surreptitiously placed a back door into the OpenBSD operating system have alarmed the computer security community, prompting calls for an audit of the source code and claims that the charges must be a hoax. Fortinet: Job outlook improving for cybercrooks In an ironic twist in the job market, more positions will open up for developers who can write customized malware packers, people who can break CAPTCHA codes, and distributors who can spread malicious code, according to Fortinet. Enisa: Malware for smartphones is a ’serious risk’ Businesses and consumers are at risk of data breaches through smartphone use, according to the European Network and Information Security Agency. The trick with the f: Google and Microsoft web sites distribute malware Last week, Google’s DoubleClick advertising platform and Microsoft’s rad.msn.com online ad network briefly distributed malware to other web sites in the form of advertising banners. New scam tactic: Fake disk defraggers It would appear that scammers are trying out new programs to see which might best confuse potential victims and evade detection by legitimate antivirus software. Microsoft closes IE and Stuxnet holes As previously announced, Microsoft has released 17 security updates to close 40 security holes. All four Windows holes so far disclosed in connection with Stuxnet have now been closed. Microsoft Offers H.264 Support to Firefox on Windows via Add-On The new HTML5 Extension for Windows Media Player Firefox Plug-in add-on from Microsoft offers users that are running Firefox on Windows 7 H.264 support for HTML5 video playback. Google proclaims Chrome business-ready Google has announced that Chrome is ready for corporate use. Microsoft Tells Exchange Customers to Think Twice Before Opting for Google Message Continuity This week, Microsoft is telling companies still running Exchange 2010’s precursors that they should carefully consider the implications of embracing Google Message Continuity. Who Google has in mind for its Chrome OS users Steven Vaughan-Nichols explains why he feels that Chrome OS will be ideal for either office-workers or people who need a computer, but do not know the first thing about how to use one safely. Oracle takes office suite to the cloud Oracle has introduced Cloud Office 1.0, a cloud-based version of its office suite, which is aimed at web and mobile users. Mozilla pays premiums for reports of vulnerabilities The Mozilla Foundation has followed Google’s example by expanding its rewards program for reports of vulnerabilities in its Web applications. Who bought those 882 Novell patents? Not just Microsoft The mysterious CPTN Holdings — the organization that bought the 882 Novell patents as part of the terms of the Attachmate acquisition of Novell – has been unmasked (Microsoft, Apple, EMC and Oracle). Appeals court: Feds need warrants for e-mail Police must obtain search warrants before perusing Internet users’ e-mail records, a federal appeals court ruled today in a landmark decision that struck down part of a 1986 law allowing warrantless access. Geek Video of the Week What happens when someone plays a wicked prank by shoveling crazy snow paths that lead to dead ends or turn back on themselves? Watch to find out! Photo by CollegeHumor. Janitor Snow Shoveling Prank Random TinyHacker Links The Oatmeal on Cat vs Internet What lengths will our poor neglected kitty hero have to go to in order to get some attention? Guide On Using JoliCloud With Windows JoliCloud is a nifty operating system that’s made for people who need a light-weight OS that’s mostly cloud based. Check this guide on using it with Windows. Use Cameyo to Easily Create Portable Programs Here’s a nifty tool to make portable apps out of programs in Windows. Check out the guide to do it. Better Family Tech Support A nice new site by Google to help members of family understand how computers work. Track Your Stolen Mobile Phone With F-Secure A useful anti-theft tool for your mobile phone. Super User Questions Another week with great answers to popular questions from Super User. What Chrome password manager fits my requirements? What’s the best way to be able to reimage windows computers? Could you suggest feature-rich disk-based personal backup program for linux (and I’ve seen a few)? What is IPv6 and why should I care? Is there any way to find out what programs are trying to connect to Internet on windows? How-To Geek Weekly Article Recap Here are our hottest articles full of geeky goodness from this past week at HTG. 20 OS X Keyboard Shortcuts You Might Not Know Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Is Your Desktop Printer More Expensive Than Printing Services? Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.? The Twelve Days of Geekmas One Year Ago on How-To Geek Enjoy reading through our latest batch of retro-geek goodness from one year ago. Macrium Reflect is a Free and Easy To Use Backup Utility How To Turn a Physical Computer Into A Virtual Machine with Disk2vhd How To Restore Windows 7 from a System Image How To Manage Hard Drive Space Used by Windows 7 Backup and Restore How To Manage Hibernate Mode in Windows 7 The Geek Note That is all we have for you this week, so see you back here again after the holidays! Got a great tip? Send it in to us at [email protected]. Photo by mitjamavsar. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

  Read the article

• Microsoft Press Deal of the Day - 5/April/2012 - Windows® Internals, Part 1, Sixth Edition

  - by TATWORTH

  Today's Deal of the day from Microsoft Press at http://shop.oreilly.com/product/0790145305930.do is Windows® Internals, Part 1, Sixth Edition."Delve inside Windows architecture and internals—guided by a team of internationally renowned internals experts. Fully updated for Windows 7 and Windows Server 2008 R2, this classic guide delivers key architectural insights on system design, debugging, performance, and support—along with hands-on experiments to experience Windows internal behavior firsthand."

  Read the article

• APress Deal of the Day 20/Oct/2013 - Windows 8 App Projects - XAML and C# Edition

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/20/apress-deal-of-the-day-20oct2013---windows-8-app.aspxToday's $10 deal of the day from APress at http://www.apress.com/9781430250654 is Windows 8 App Projects - XAML and C# Edition "Windows 8 App Projects - XAML and C# Edition takes you through the process of building your own apps for Windows 8 in a project oriented, example driven way. The book is aimed at developers looking to build Windows 8 apps in a variety of contexts."

  Read the article

• Upgrading from Vista Home Basic to Vista Business

  - by miracle2k

  I have a PC that came with Vista Home Basic, and I now have some need for Remote Desktop, which is not included in Home Basic, so I'd like to upgrade. Now, there is apparently some hack to get Remote Desktop working in Home Premium, and obviously, it's in Ultimate, but really, the Business Edition would be the best fit for us. Unfortunately, Windows Anytime Upgrade does not provide a path from Home Basic to Business. My question is, if I were to buy a standalone Vista Business license, could I use it to do an upgrade from my current Home Basic installation? Would it be simply entering the new license key?

  Read the article

• Visual Studio + Database Edition + CDC = Deploy Fail

  - by Ben

  Hi All, I've got a database using change data capture (CDC) that is created from a Visual Studio database project (GDR2). My problem is that I have a stored procedure that is analyzing the CDC information and then returning data. How is that a problem you ask? Well, the order of operation is as follows. Pre-deployment Script Tables Indexes, keys, etc. Procedures Post-deployment Script Inside the post-deployment script is where I enable CDC. Here-in lies the problem. The procedure that is acting on the CDC tables is bombing because they don't exist yet! I've tried to put the call to sys.sp_cdc_enable_table in the script that creates the table, but it doesn't like that. Error 102 TSD03070: This statement is not recognized in this context. C:...\Schema Objects\Schemas\dbo\Tables\Foo.table.sql 20 1 Foo Is there a better/built-in way to enable CDC such that it's references are available when the stored procedures are created? Is there a way to run a script after tables are created but before other objects are created? How about a way to create the procedure dependencies be damned? Or maybe I'm just doing things that shouldn't be done?!?! Now, I have a work around. Comment out the sproc body Deploy (CDC is created) Uncomment sproc Deploy Everything is great until the next time I update a CDC tracked table. Then I need to comment out the 'offending' procedure. Thanks for reading my question and thanks for your help!

  Read the article

• How to check code is compatible with Windows 7

  - by Julen

  Hello, We are developing using Visual C# 2008 Express a program based on WPF under Windows XP machines (32 bits). The thing is that we have tried to run the program in two Windows 7 machines, one is 32 bits Windows 7 and the other is 64 bits Windows 7. Under Windows XP everything is fine. In Windows 7 machine, it launches in the 32 bits version altough there is an error when running one functionality (it does not happen in XP). In W7 64 bits it even does not launch. Is this normal? Is not possible to run 32 bit programs under W7 64-bits,even if they execute slower?? How can we check the code is compatible with Windows 7? Thank you very much in advance. Julen.

  Read the article

• Help in decide the partition to install ubuntu

  - by G.Ashwin kumar

  I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Using PHP OCI8 with 32-bit PHP on Windows 64-bit

  - by christopher.jones

  The world migration from 32-bit to 64-bit operating systems is gaining pace. However I've seen a couple of customers having difficulty with the PHP OCI8 extension and Oracle DB on Windows 64-bit platforms. The errors vary depending how PHP is run. They may appear in the Apache or PHP log: Unable to load dynamic library 'C:\Program Files (x86)\PHP\ext\php_oci8_11g.dll' - %1 is not a valid Win32 application. or Warning oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries Other than IIS permission issues a common cause seems to be trying to use PHP with libraries from an Oracle 64-bit database on the same machine. There is currently no 64-bit version of PHP on http://php.net/ so there is a library mismatch. A solution is to install Oracle Instant Client 32-bit and make sure that PHP uses these libraries, while not interferring with the 64-bit database on the same machine. Warning: The following hacky steps come untested from a Linux user: Unzip Oracle Instant Client 32-bit and move it to C:\WINDOWS\SYSWOW64\INSTANTCLIENT_11_2. You may need to do this in a console with elevated permissions. Edit your PATH environment variable and insert C:\WINDOWS\SYSTEM32\INSTANTCLIENT_11_2 in the directory list before the entry for the Oracle Home library. Windows makes it so all 32-bit applications that reference C:\WINDOWS\SYSTEM32 actually see the contents of the C:\WINDOWS\SYSWOW64 directory. Your 64-bit database won't find an Instant Client in the real, physical C:\WINDOWS\SYSTEM32 directory and will continue to use the database libraries. Some of our Windows team are concerned about this hack and prefer a more "correct" solution that (i) doesn't require changing the Windows system directory (ii) doesn't add to the "memory" burden about what was configured on the system (iii) works when there are multiple database versions installed. The solution is to write a script which will set the 64-bit (or 32-bit) Oracle libraries in the path as needed before invoking the relevant bit-ness application. This does have a weakness when the application is started as a service. As a footnote: If you don't have a local database and simply need to have 32-bit and 64-bit Instant Client accessible at the same time, try the "symbolic" link approach covered in the hack in this OTN forum thread. Reminder warning: This blog post came untested from a Linux user.

  Read the article

• Uninstalling Reporting Server 2008 on Windows Server 2008

  - by Piotr Rodak

  Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems:   To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

  Read the article

• Enabling the "Use Windows XP Style DPI scaling" option in Windows 7

  - by chandmk

  On Windows 7, if you go to Display Set Custom text size (DPI), the "Use Windows XP Style DPI scaling" option is disabled (greyed out). What do I need to do to enable this option?

  Read the article

• Add Zune Desktop Player to Windows 7 Media Center

  - by DigitalGeekery

  Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Vmware 7 AppHangB1 on windows 7 x64 (host) and windows xp (guest)

  - by frabiacca

  I'm having an issue running Windows XP professional guests using Vmware workstation 7.0.0 build-203739 in a Windows 7 Ultimate 64 bit host. My platform is a Dell Studio XPS 13 with 6GB RAM with an x64 processor. The VMWare freezes for up to 90s every 15 - 20 minutes, then just carries on as if nothing happened! I've no idea what the problem is ... Any idea?

  Read the article

• How To Disconnect Non-Mapped UNC Path “Drives” in Windows

  - by The Geek

  Have you ever browsed over to another PC on your network using “network neighborhood”, and then connected to one of the file shares? Without a drive letter, how do you disconnect yourself once you’ve done so? Really confused as to what I’m talking about? Let’s walk through the process. First, imagine that you browse through and connect to a share, entering your username and password to gain access. The problem is that you stay connected, and there’s no visible way to disconnect yourself. If you try and shut down the other PC, you’ll receive a message that users are still connected. So let’s disconnect! Open up a command prompt, and then type in the following: net use This will give you a list of the connected drives, including the ones that aren’t actually mapped to a drive letter. To disconnect one of the connections, you can use the following command: net use /delete \\server\sharename For example, in this instance we’d disconnect like so: net use /delete \\192.168.1.205\root$ Now when you run the “net use” command again, you’ll see that you’ve been properly disconnected. If you wanted to actually connect to a share without mapping a drive letter, you can do the following: net use /user:Username \\server\sharename Password You could then just pop \\server\sharename into a Windows Explorer window and browse the files that way. Note that this technique should work exactly the same in any version of windows. Similar Articles Productive Geek Tips Remove "Map Network Drive" Menu Item from Windows Vista or XPDisable the Annoying "This page has an unspecified potential security risk" When Using Files on a Network ShareCopy Path of a File to the Clipboard in Windows 7 or VistaMap a Network Drive from XP to Windows 7Defrag Multiple Hard Drives At Once In Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily

  Read the article

• Play Your Favorite DOS Games in XP, Vista, and Windows 7

  - by Matthew Guay

  Want to take a trip down memory lane with old school DOS games?  D-Fend Reloaded makes it easy for you to play your favorite DOS games directly on XP, Vista, and Windows 7. D-Fend Reloaded is a great frontend for DOSBox, the popular DOS emulator.  It lets you install and run many DOS games and applications directly from its interface without ever touching a DOS prompt.  It works great on XP, Vista, and Windows 7 32 & 64-bit versions.   Getting Started Download D-Fend Reloaded (link below), and install with the default settings.  You don’t need to install DOSBox, as D-Fend Reloaded will automatically install all the components you need to run DOS games on Windows. D-Fend Reloaded can also be installed as a portable application, so you can run it from a flash drive on any Windows computer by selecting User defined installation. Then select Portable mode installation. Once D-Fend Reloaded is installed, you can go ahead and open the program. Then simply click “Accept all settings” to apply the default settings.   D-Fend is now ready to run all of your favorite DOS games. Installing DOS Games and Applications: To install a DOS game or application, simply drag-and-drop a zip file of the app into D-Fend Reloaded’s window.  D-Fend Reloaded will automatically extract the program… Then will ask you to name the application and choose where to store it — by default it uses the name of the DOS app. Now you’ll see a new entry for the app you just installed.  Simply double-click to run it.   D-Fend will remind you that you can switch out of fullscreen mode by pressing Alt+Enter, and can also close the DOS application by pressing Ctrl+F9.  Press Ok to run the program. Here we’re running Ms. PacPC, a remake of the classic game Ms. Pac-Man, in full-screen mode.  All features work automatically, including sound, and you never have to setup anything from DOS command line — it just works. Here it’s in windowed mode running on Windows 7. Please note that your color scheme may change to Windows Basic while running DOS applications. You can run DOS application just as easily.  Here’s Word 5.5 running in in DOSBox through D-Fend Reloaded… Game Packs: Want to quickly install many old DOS freeware and trial games?  D-Fend Reloaded offers several game packs that let you install dozens of DOS games with only four clicks…just download and run the game pack installer of your choice (link below). Now you’ve got a selection of DOS games to choose from. Here’s a group of poor lemmings walking around … in Windows 7. Conclusion D-Fend Reloaded gives you a great way to run your favorite DOS games and applications directly from XP, Vista, and Windows 7.  Give it a try, and relive your DOS days from the comfort of your Windows desktop. What were some of your favorite DOS games and applications? Leave a comment and let us know. Links Download D-Fend Reloaded Download DOS game packs for D-Fend Reloaded Download Ms. Pac-PC Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanThursday’s Pre-Holiday Lazy Links RoundupFriday Fun: Five More Time Wasting Online GamesFriday Fun: Holiday Themed Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• Access Your favorite RSS Feeds in Windows Media Center

  - by Mysticgeek

  There are a lot of apps out there that help you organize and view your favorite RSS feeds. If you subscribe to a lot, sitting at a computer to view them all can be overwhelming. Today we take a look at accessing them from the couch with WMC. Using Media Center RSS Feeds To get RSS feeds to work with this plugin you need to subscribe to them through Internet Explorer.   The first thing you’ll need to do is activate Media Center RSS Reader (link below) on their site. Next install the Media Center RSS Reader plugin (link below). Installation is easy, just select the defaults when going through the wizard. Now when you open Media Center you’ll see the RSS icon in the main menu under Accessories. You can also find it in the Extras section. Enter in the username and activation code you received when you activated the plugin earlier. After activation you’ll see a list of the RSS feeds you currently subscribed through Internet Explorer. Click on the site feed you want to read and you’ll get a list of the different items available. Next you get and overview of the contents for the item you selected. From there you can show the page of the website containing that item. For any audio or video feeds you subscribe to, at the overview screen, click on Play to watch it. Then just sit back and watch your favorite video RSS feeds on WMC.   Media Center RSS Reader plugin will work with Vista and Windows 7. If you’re looking for a way to check out your RSS feeds in WMC this is a cool plugin for it. Download Media Center RSS Reader –You can activate it here as well. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Integrate Boxee with Media Center in Windows 7Integrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideSchedule Updates for Windows Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Attempted to dual boot with Windows and now can only run Ubuntu

  - by Zeusoflightning125

  Very recently, I decided to attempt to dual boot Ubuntu with my already installed windows 8. Everything worked perfectly, I manually set up disk partitions (this is all on 1 hard drive), and it loaded up Ubuntu fine. HOWEVER, now when I try to load up my computer it only has 2 options in the boot menu and both just load up Windows (both were something related to hard disk). I also can only boot from legacy hard disk things. (I already only was able to aside from my USB that I installed Windows from) The Windows files are still accessible from Ubuntu, but I cannot just load Windows. There is no option to. I also don't have the 2 buttons for each operating system I was expecting. I can only select the thing to load from BIOS. So, my question is, how do I load the Windows partition on my hard drive? I'm sorry if I'm a bit clueless I am just new to both Linux and dual-booting.

  Read the article

• Windows user account just for accessing network shares on a Windows 7 machine

  - by Paulo

  I would like my Xbox (Xbmc) to access my Windows 7 shares without having Guest accounts enabled and without using my Administrator account login details. I have tried making it an account called Xbox and this works fine but the Xbox account appears on the login page for Windows. Is there a way to create an account that is purely for accessing shares without it appearing as a user account????

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >