Search Results

Search found 21097 results on 844 pages for 'check snmp'.

Page 603/844 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

• NuGet JustMock

  - by mehfuzh

  As most of us already know JustMock got  a free edition. The free edition is not a stripped down of the features of the full edition but I would rather say its a strip down of the type you can mock. Technically, free version runs on  proxy as full version runs on proxy + profiler. In full version, It switches to profiler when you are mocking final methods or sealed class or anything else that can not be done using inheritance. Like in full version you can mock non public methods , in free version you can still do it but it has to be virtual for protected or must be done through InternalsVisibleTo attribute for internal virtual methods (If you have access to the source and can apply the attribute). Now, you can get a copy of free edition from the product page. Install it and off you go. But it is also exposed to NuGet. Those of you are not familiar with NuGet (that will be odd). But still NuGet is the centralized package manager from Microsoft that cuts the workflow of manual inclusion of  libraries in your project. I think NuGet in future will limit the scope of  “.vsi” packages and installers because of its ease (except in some cases). Its similar to ruby gems. In ruby, virtually you can install any library in this way “gems  install <target_library>” and you are off to go. It will check the dependencies, install them or less prompt with the steps you need to do.   Now sticking to the post, to get started you first need to install NuGet package manager. Once you have completed the step pressing “Ctrl + W, Ctrl + Z” it will bring up an console like one below:   Once you are here, you just have to type “install-package justmock” Next, it will should print the confirmation when the installation is complete: Moving to visual studio solution explorer, you will now see:   Finally, NuGet is still in its early ages and steps that are shown here may not remain the same in coming releases, but feel free to enjoy what is out there right now. Regarding JustMock free edition, there is a nice post by Phil Japikse at Introducing JustMock Free Edition. I think its worth checking if not already.   Have fun and happy holidays!

  Read the article

• Where Are You on the Visualization Maturity Curve?

  - by Celine Beck

  The old phrase “A picture is worth a thousand words” is as true now as ever. Providing the right users with access to the right product data, at the right time, can provide significant benefits to a business. This is especially evident with increasing technical and product complexities, elongated supply chains, and growing pressure to bring innovative products to market faster. With this in mind, it is easy to understand why visualization is an integral part of any successful product lifecycle management (PLM) strategy. At a bare minimum, knowledge workers use multiple individual documents of different formats and structure, and leverage visualization solutions to access information; but the real value of visualization can be fully reaped when it is connected to enterprise applications like PLM and tied to the appropriate business context. The picture below illustrates this visualization maturity curve, as we presented during the last Oracle Open World and the transformational effect that visualization can have on PLM processes and performance (check out the post about AutoVue Key Highlights from Oracle Open World 2012 for more information). Organizations are likely to see greater positive impact on business performance when visualization is connected to enterprise systems, allowing access to information coming from multiple sources, such as PLM, supply chain management (SCM) and enterprise resource planning (ERP). This allows organizations to reach higher levels of collaboration and optimize decision-making capacity as users can benefit from in-context access to visual information. For instance, within a PLM system, a design engineer can access a product assembly and review digital annotations added by other users specific to the engineering change request he is reviewing rather than all historical annotations. The last stage on the curve is what we call augmented business visualization (ABV).  ABV is an innovative framework which lets structured data (from Oracle’s Agile PLM for instance) interact with unstructured data (documents, design, 3D models, etc). With this new level of integration, information coming from multiple sources can be presented in a highly visual fashion; color displays can be used in order to identify parts with specific characteristics (for example pending quality issues) and you can take actions directly from within the context of documents and designs, maximizing user productivity. Those who had the chance to attend our PLM session during Oracle Open World already got a sneak peek of our latest augmented business visualization for Oracle’s Agile PLM. The solution generated a lot of wows. Stephen Porter, CEO at Zero Wait State, indicated in a post entitled “The PLM State: the Manhattan Project-Oracle’s Next Big Secret Weapon” that “this kind of synergy between visualization and PLM could qualify as a powerful weapon differentiating Agile PLM from other solutions.” If you are interested in learning more about ABV for Oracle’s Agile PLM and hear about real examples of usage of visualization at all stages of the visualization maturity curve, don’t miss our Visual Decision Making to Optimize New Product Development and Introduction session during the Oracle Value Chain Summit (Feb. 4-6, 2013, San Francisco). We look forward to seeing you there!

  Read the article

• OWB 11gR2 &ndash; OMB and File Editing

  - by David Allan

  Here we will see how we can use the IDE for editing OMB scripts. The 11gR2 release is based on the common Oracle platform IDE used also by JDeveloper. It comes with a bunch of standard behavior for editing and rendering code. One of the lesser known things is that if you drop a text file into OWB you can edit it. So you can drop your tcl scripts right into OWB and edit in-place, and don’t need another IDE like Eclipse just for this task. Cool, so you have the file here. There may be no line numbers, you can toggle line numbers on by right clicking in the gutter. If we edit the file within the OWB IDE, the save is a little different from normal. OWB doesn’t normally manipulate files so things like ctrl-s to save, saves the OWB objects, but if you edit a file the closing of the file will ask if you want to save it – check it out. Now we enter the realm of ‘he who dares’…. Note the IDE doesn’t know about tcl files out of the box, so you see above there is no syntax highlighting. The code is identified by the extension… .java is java, .html is HTML etc. With OWB, the OMB scripts are tcl, we usually have .tcl extension on these files. One of the things we can do to trick up the syntax highlighting is to simply rename the file to have a .java suffix, then all of a sudden we get syntax highlighting, see the illustration here where side by side we see a the file with a .java extension and a .tcl extension. Not ideal pretending to be .java but gets us a way to having something more useful than notepad. We can then change the syntax highlighting such that we get Eclipse like highlighting within the IDE from the Tools Preferences option; You then get the Eclipse like rendering albeit using a little tweak on the file names… Might be useful if you are doing any kind of heavy duty OMB script development and just want a single IDE. The OMBPlus panel is then at hand for executing and testing it out.

  Read the article

• Register Game Object Components in Game Subsystems? (Component-based Game Object design)

  - by topright

  I'm creating a component-based game object system. Some tips: GameObject is simply a list of Components. There are GameSubsystems. For example, rendering, physics etc. Each GameSubsystem contains pointers to some of Components. GameSubsystem is a very powerful and flexible abstraction: it represents any slice (or aspect) of the game world. There is a need in a mechanism of registering Components in GameSubsystems (when GameObject is created and composed). There are 4 approaches: 1: Chain of responsibility pattern. Every Component is offered to every GameSubsystem. GameSubsystem makes a decision which Components to register (and how to organize them). For example, GameSubsystemRender can register Renderable Components. pro. Components know nothing about how they are used. Low coupling. A. We can add new GameSubsystem. For example, let's add GameSubsystemTitles that registers all ComponentTitle and guarantees that every title is unique and provides interface to quering objects by title. Of course, ComponentTitle should not be rewrited or inherited in this case. B. We can reorganize existing GameSubsystems. For example, GameSubsystemAudio, GameSubsystemRender, GameSubsystemParticleEmmiter can be merged into GameSubsystemSpatial (to place all audio, emmiter, render Components in the same hierarchy and use parent-relative transforms). con. Every-to-every check. Very innefficient. con. Subsystems know about Components. 2: Each Subsystem searches for Components of specific types. pro. Better performance than in Approach 1. con. Subsystems still know about Components. 3: Component registers itself in GameSubsystem(s). We know at compile-time that there is a GameSubsystemRenderer, so let's ComponentImageRender will call something like GameSubsystemRenderer::register(ComponentRenderBase*). pro. Performance. No unnecessary checks as in Approach 1. con. Components are badly coupled with GameSubsystems. 4: Mediator pattern. GameState (that contains GameSubsystems) can implement registerComponent(Component*). pro. Components and GameSubystems know nothing about each other. con. In C++ it would look like ugly and slow typeid-switch. Questions: Which approach is better and mostly used in component-based design? What Practice says? Any suggestions about implementation of Approach 4? Thank you.

  Read the article

• Mobile Shopping Alerts

  - by David Dorf

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} It’s been popular to offer coupons when people check-in to a store, because you’re catching them at the best possible time – they’re presumably in a shopping state-of-mind, and they’re at your store.  But wouldn’t it be even better to catch the people walking by your store and entice them to visit?  That’s the concept of geo-fences.  When people enter a geographic zone, they are sent a relevant text message alerting them about something nearby. I wrote about Placecast doing this for The North Face, noting that the messages were a unique combination of both offers and useful information about outdoor activities. After creating a program with European carrier O2, Placecast recently entered into an agreement to provide similar services to AT&T customers.  The ShopAlerts program allows AT&T customers in Chicago, Los Angeles, New York City, and San Francisco opt-in to receive these messages.  The program will be expanded nationwide as early as this summer. It’s a much better model for customers (and Placecast) to sign-up once with the carrier instead of each individual retailer, but I hope the messages aren’t restricted to advertising.  I really the like the idea of providing other information, such as nearby special events, races, and perhaps even things to avoid like construction.

  Read the article

• Redgate ANTS Performance Profiler

  - by Jon Canning

  Seemingly forever I've been working on a business idea, it's a REST API delivering content to mobiles, and I've never really had much idea about its performance. Yes, I have a suite of unit tests and integration tests, but these only tell me that it works, not how well it works. I was also about to embark on a major refactor, swapping the database from MongoDB to RavenDB, and was curious to see if that impacted performance at all, so I needed a profiler that supported IIS Express that I can run my integration tests against, and Google gave me:   http://www.red-gate.com/supportcenter/content/ANTS_Performance_Profiler/help/7.4/app_iise   Excellent. Following the above guide an instance of IIS Express and is launched, as is Internet Explorer. The latter eventually becomes annoying, I would like to decide whether I want a browser opened, but thankfully the guide is wrong in that it can be closed and profiling will continue. So I ran my tests, stopped profiling, and was presented with a call tree listing the endpoints called and allowing me to drill down to the source code beneath.     Although useful and fascinating this wasn't what I was expecting to see, I was after the method timings from the entire test suite. Switching Show to Methods Grid presented me with a list of my methods, with the slowest lit up in red at the top. Marvellous.     I did find that if you switch to Methods Grid before Call tree has loaded, you do not get the red warnings.   StructureMap was very busy, and next on the list was a request filter that I didn't expect to be so overworked. Highlighting it, the source code was presented to me in the bottom window with timings and a nice red indicator to show me where to look. Oh horror, that reflection hack I put in months ago, I'd forgotten all about it. It was calling Validate<T>() which in turn was resolving a validator from StructureMap. Note to self, use //TODO: when leaving smelly code lying around.     Before refactoring, remember to Save Profile Results from the File menu. Annoyingly you are not prompted to save your results when exiting, and using Save Project will only leave you thankful that you have version control and can go back in time to run your tests again.   Having implemented StructureMap’s ForGenericType, I ran my tests again and:     Win, thankyou ANTS (What does ANTS stand for BTW?)   There's definitely room in my toolbox for a profiler; what started out as idle curiosity actually solved a potential problem. When presented with a new codebase I can see enormous benefit from getting an overview of the pipeline from the call tree before drilling into the code, and as a sanity check before release it gives a little more reassurance that you've done your best, and shows you exactly where to look if you haven’t.   Next I’m going to profile a load test.

  Read the article

• A Facelift for Fusion

  - by Richard Lefebvre

  It's simple. It's modern. It was the buzz at OpenWorld in San Francisco. See what the UX team has been up to and what customers are going to love. At OpenWorld 2012, the Oracle Applications User Experience (UX) team unveiled the new face of Fusion Applications. You might have seen it in sessions presented by Chris Leone, Anthony Lye, Jeremy Ashley and others or you may have gotten a look on the demogrounds. Why are we delivering a new face for Fusion Applications? "Because," says Ashley, vice president of the Oracle Applications User Experience team, "we want to provide a simple, modern, productive way for users to complete their top quick-entry tasks. The idea is to provide a clear, productive user experience that is backed by the full functionality of Fusion Applications." The first release of the new face of Fusion focuses on three types of users. It provides a fully functional gateway to Fusion Applications for: ·         New and casual users who need quick access to self-service tasks ·         Professional users who need fast access to quick-entry, high-volume tasks ·         Users who are looking for a way to quickly brand their portal for employees The new face of Fusion allows users to move easily from navigation to action, Ashley said, and it has been designed for any device -- Mac, PC, iPad, Android, SmartBoard -- in the browser. How Did We Build It? The new face of Fusion essentially is a custom shell, developed by the Apps UX team, and a set of page templates that embodies a simple design aesthetic. It's repeatable, providing consistency across its pages, and the need for training is little to zero. More specifically, the new face of Fusion has been built on ADF. The Applications UX team created pages in JDeveloper using local tasks flows bound to existing view objects. Three new components were commissioned from ADF and existing Fusion components were re-skinned to deliver a simple, modern user experience. It really is that simple - and to prove that point, we've been sharing our new face of Fusion story on several Oracle channels such as this one. If you want to learn more, check OpenWorld presentation on the Fusion Learning Center.

  Read the article

• Friday Fun: Destroy the Web

  - by Mysticgeek

  Another Friday has arrived and it’s time to screw off on company time. Today we take a look at a unique game Add-on for Firefox called Destroy the Web. Destroy the Web Once you install the Add-on and restart Firefox, you’ll see the Destroy the Web icon on the toolbar. Click on it to destroy whatever webpage you’re on.   The game starts up and gives you a 3 second countdown… Now move the target over different elements of the page to destroy them. You have 30 seconds to destroy the site contents. If you are angry at a particular company or the one you work for, this can give you some fun stress relief by destroying it’s website. After you’ve destroyed as much of the page as possible, you’re given a score. You get different amounts of points for destroying certain elements on the page. Basically destroy as much as possible to get the most points. You can submit your score and check out some of the scoreboard leaders as well.  There are some cool sound effects and arcade sounding background music, so make sure to turn the volume down while playing. Or you can go into the Add-on options and disable it. If you want a unique way to let off some steam before the weekend starts, this is a fun way of doing it. Install Destroy the Web for Firefox Similar Articles Productive Geek Tips Friday Fun: Destroy Everything with Indestructo TankWeekend Fun: Easter Egg in Spybot Search & DestroyFriday Fun: BoombotSecure Computing: Create Scheduled Scans With Spybot Search & DestroyFriday Fun: Castle Game Collection TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• PowerShell – Show a Notification Balloon

  - by BuckWoody

  In my presentations for PowerShell I sometimes want to start a process (like a backup) that will take some time. I normally pop up a notification “balloon” at the start, and then do the bulk of the work, and then pop up a balloon at the end to let me know it’s done. You can actually try out this little sample (on a test system, of course) without any other code to see what it does. Then just put the other PowerShell commands in the #Do Some Work part. Oh – throw an icon (.ico file) in a c:\temp directory or point that somewhere else. (No, this probably isn’t original. Can’t remember where I saw the original code, but I’ve modified it a bit anyway, so if you’re the original author and this looks slightly familiar, post a comment.) [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") $objBalloon = New-Object System.Windows.Forms.NotifyIcon $objBalloon.Icon = "C:\temp\Folder.ico" # You can use the value Info, Warning, Error $objBalloon.BalloonTipIcon = "Info" # Put what you want to say here for the Start of the process $objBalloon.BalloonTipTitle = "Begin Title" $objBalloon.BalloonTipText = "Begin Message" $objBalloon.Visible = $True $objBalloon.ShowBalloonTip(10000) # Do some work # Put what you want to say here for the completion of the process $objBalloon.BalloonTipTitle = "End Title" $objBalloon.BalloonTipText = "End Message" $objBalloon.Visible = $True $objBalloon.ShowBalloonTip(10000) Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• More on PHP and Oracle 11gR2 Improvements to Client Result Caching

  - by christopher.jones

  Oracle 11.2 brought several improvements to Client Result Caching. CRC is way for the results of queries to be cached in the database client process for reuse.  In an Oracle OpenWorld presentation "Best Practices for Developing Performant Application" my colleague Luxi Chidambaran had a (non-PHP generated) graph for the Niles benchmark that shows a DB CPU reduction up to 600% and response times up to 22% faster when using CRC. Sometimes CRC is called the "Consistent Client Cache" because Oracle automatically invalidates the cache if table data is changed.  This makes it easy to use without needing application logic rewrites. There are a few simple database settings to turn on and tune CRC, so management is also easy. PHP OCI8 as a "client" of the database can use CRC.  The cache is per-process, so plan carefully before caching large data sets.  Tables that are candidates for caching are look-up tables where the network transfer cost dominates. CRC is really easy in 11.2 - I'll get to that in a moment.  It was also pretty easy in Oracle 11.1 but it needed some tiny application changes.  In PHP it was used like: $s = oci_parse($c, "select /*+ result_cache */ * from employees"); oci_execute($s, OCI_NO_AUTO_COMMIT); // Use OCI_DEFAULT in OCI8 <= 1.3 oci_fetch_all($s, $res); I blogged about this in the past.  The query had to include a specific hint that you wanted the results cached, and you needed to turn off auto committing during execution either with the OCI_DEFAULT flag or its new, better-named alias OCI_NO_AUTO_COMMIT.  The no-commit flag rule didn't seem reasonable to me because most people wouldn't be specific about the commit state for a query. Now in Oracle 11.2, DBAs can now nominate tables for caching, either with CREATE TABLE or ALTER TABLE.  That means you don't need the query hint anymore.  As well, the no-commit flag requirement has been lifted.  Your code can now look like: $s = oci_parse($c, "select * from employees"); oci_execute($s); oci_fetch_all($s, $res); Since your code probably already looks like this, your DBA can find the top queries in the database and simply tune the system by turning on CRC in the database and issuing an ALTER TABLE statement for candidate tables.  Voila. Another CRC improvement in Oracle 11.2 is that it works with DRCP connection pooling. There is some fine print about what is and isn't cached, check the Oracle manuals for details.  If you're using 11.1 or non-DRCP "dedicated servers" then make sure you use oci_pconnect() persistent connections.  Also in PHP don't bind strings in the query, although binding as SQLT_INT is OK.

  Read the article

• I'd like to switch from 32-bit to 64-bit within same version

  - by Marty Fried

  I have a 32-bit installation of 11.10 on my 64-bit (4 GB) home AMD system. I have recently read up a bit on 64-bit version, and it seems that it would be a marginally better choice now for me. I have read about several methods to help reinstall all the various apps, using either dpkg's get-selections/set-selections and dselect in various ways, or using synaptic's save/get markings. The problem here is that I've read several variations, and I'm not sure which is best. I have enough disk space to do this with a brand new partition, so I'm not too worried about destroying anything, but I don't really want to make it my life's work, hence my appeal for expert tips. Since it's the same version, would it be safe to copy configuration files from the 32-bit system? I'd guess my home directory and /etc might be enough, and would save at least most of the time to reconfigure. But are there difference in configuration files in either of these directories for 32 vs 64 bits that might cause problems? After reinstalling to 64-bit, I can then continue along the 64 bit path for upgrades, but I thought it would be easier to switch the same version, than to try to reinstall apps and upgrade at the same time. Some methods I've seen suggested, among others: A. From Ubuntu forums On your old system (assuming it is still working), start up Synaptic and go: File->Save Markings and choose a file name along with a location (like a USB drive) that you can use when you have installed your new system). You need to check on the bottom: "Save full state, not only changes" This file contains a list of all your currently installed packages, and when you have installed and booted up your new system (and configured your repositories to the best for your location - as we all do, don't we?) then start up Synaptic and go: File-Read Markings and point it at your saved file, and after that has completed then select Apply to kick off the download & installation of all of those packages you had installed previously! B. From the same discussion: According to section 6.4.9 of the Debian Reference Manual, the following will save both the list of packages installed and their debconf configuration: # dpkg --get-selections "*" >myselections # or use \* # debconf-get-selections > debconfsel.txt and the following will reinstall and reconfigure them: # dselect update # debconf-set-selections < debconfsel.txt # dpkg --set-selections <myselections # apt-get -u dselect-upgrade # or dselect install C. A variation on the above I've seen a lot, this from stackoverflow: dpkg --get-selections > package_list then on the new install: cat package_list | sudo dpkg --set-selections && sudo apt-get dselect-upgrade I don't really understand B, or why it's slightly different than many others.

  Read the article

• iTorque for a simple arcade game

  - by Herfus

  I have a basic understanding of programming, but I am no programmer. I've had a couple of a semesters with java programming, so we're talking pretty basic here. I have some scripting experience with game editors where I've created a few (simple) encounters, boss AI, abilities, events and so on. I've mostly done level design with UDK, Source and several other toolsets for a few years now, but I'd like to divert some of the focus to iphone-development. I've participated in a few development projects (source, udk, daot) where I've had a variety of roles (yet never beyond simple scripting). I have just finished prototyping an Iphone game (using game maker) and begun a bit more precise planning on what I'll have to do for the real version. The game is fairly simple, perhaps the best comparison in scope and complexity would be Doodlejump for iPhone. The reason I created the prototype was not just to answer a few questions about the gameplay, but to get some insight into what kind of problems I might face when trying to develop the real thing. I've been looking for engines that I can use for this. iTorque looks, so far, like the best option with a scripting language and WYSIWYG-editor. However the price is fairly steep and I'd like to prepare myself as much as possible before jumping into this, which is why I'm going to ask a few questions here. What kind of difficulties do you think I might run into, considering what you've read so far? Not just with torque, but development in general. I'm making this question mostly to have someone to reality check me. I usually achieve to do what I'm trying to do with scripting, but something tells me there's a very big difference between scripting an AI or an event and creating game logic. Will it be too much of a leap? Just how simple is it to use the Torque scripting language? Obviously I don't expect to be prepared, I expect it to be a learning process. However, I'd still like to be at least a bit confident on the time I'll have to dedicate to this first.

  Read the article

• Firewall error when running Pando Media Booster (for League of Legends) in wine

  - by Matt2

  When I'm downloading League of Legends using Pando Media Booster in wine, I get an error when starting it: Connection Error Your system is currently not allowing access to our servers. Check your Firewall and/or security software sttings to allow PMB.exe to run. Reluctantly, I disabled ufw, but to no avail. The terminal displays the following multiple times: fixme:msvcp90:_Locinfo__Locinfo_ctor_cat_cstr (0x33fcf8 1 C) semi-stub fixme:dbghelp:EnumerateLoadedModulesW64 If this happens, bump the number in mod fixme:wininet:InternetAttemptConnect Stub fixme:oleacc:CreateStdAccessibleObject 0x4f00bc -4 {618736e0-3c3d-11cf-810c-00aa00389b71} 0xc252d18 fixme:oleacc:CreateStdAccessibleObject 0x3700c0 -4 {618736e0-3c3d-11cf-810c-00aa00389b71} 0xc252958 fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:uxtheme:BeginBufferedPaint Stub (0x1c28 0xcde880 0 (nil) 0xc2f6fe8) fixme:uxtheme:EndBufferedPaint Stub ((nil) 1) fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:uxtheme:EndBufferedPaint Stub ((nil) 1) fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:InternetAttemptConnect Stub fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:InternetAttemptConnect Stub fixme:wininet:InternetAttemptConnect Stub fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:advapi:RegisterEventSourceW ((null),L"BugSplat"): stub fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00000001,(nil),0x0003,0x00000000,0x33f224,(nil)): stub err:eventlog:ReportEventW L"Pando_Win" err:eventlog:ReportEventW L"Pando" err:eventlog:ReportEventW L"-1" fixme:advapi:DeregisterEventSource (0xcafe4242) stub fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do! fixme:advapi:RegisterEventSourceW ((null),L"BugSplat"): stub fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00000001,(nil),0x0003,0x00000000,0x33f224,(nil)): stub err:eventlog:ReportEventW L"Pando_Win" err:eventlog:ReportEventW L"Pando" err:eventlog:ReportEventW L"-1" fixme:advapi:DeregisterEventSource (0xcafe4242) stub Any idea what's going on here? Is there a better place to put this question?

  Read the article

• Turn Chrome’s New Tab Page into an Ubuntu Forums Powerhouse

  - by Asian Angel

  There’s a lot of start page plug-ins for Google Chrome, but if you’re an Ubuntu Forums enthusiast, you might be interested in the powerful UbuntuForums.org Start Page extension. Using the Ubuntu Forums Chrome Start Page Once you’ve installed the extension and opened a new tab, you’ll notice quite a difference from the boring default “New Tab Page”. While you may look at this and wonder if what you see is all that there is to it, there’s actually a lot of hidden customization and functionality. The upper left corner is where you will control the content displayed in the “Ubuntu New Tab Page”. The “Buttons Toolbar” that you see at the top lets you shift between the types of content viewed, from RSS feeds to bookmarks and more. This entire set of links provides direct links to the appropriate section in the Ubuntu Forums. As with the set of links pictured above each of these will open in a new tab when clicked on. There’s even a feature to browse wallpapers from DesktopNexus with categories on the left and pictures to the right. If you want to return to the regular layout you should use the “Start Page Link” highlighted here. Options The options will allow you to customize the colors shown in the “Ubuntu New Tab Page” to create a very nice match to your current browser and/or system theme if desired. You can also do some customization to the fonts, “Bookmark Shortcuts”, and populate the “Custom Links Section” in the main page. Conclusion If you are an Ubuntu enthusiast then this will be a very useful extension to add to your browser. The wealth of direct links and built-in functionality make this extension worth trying. Links Download the Ubuntuforums.org Start Page extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Turn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuScroll Backwards From the Ubuntu Server Command LineAnnouncing the How-To Geek ForumsDisable the System Beep on Ubuntu EdgyEnable Smooth fonts on Ubuntu Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Automate RAC Cluster Upgrades using EM12c

  - by HariSrinivasan

  One of the most arduous processes  in DB maintenance is upgrading Databases across major versions, especially for complex RAC Clusters.With the release of Database Plug-in  (12.1.0.5.0), EM12c Rel 3 (12.1.0.3.0)  now supports automated upgrading of RAC Clusters in addition to Standalone Databases. This automation includes: Upgrade of the complete Cluster across the nodes. ( Example: 11.1.0.7 CRS, ASM, RAC DB  ->   11.2.0.4 or 12.1.0.1 GI, RAC DB)  Best practices in tune with your operations, where you can automate upgrade in steps: Step 1: Upgrade the Clusterware to Grid Infrastructure (Allowing you to wait, test and then move to DBs). Step 2: Upgrade RAC DBs either separately or in group (Mass upgrade of RAC DB's in the cluster). Standard pre-requisite checks like Cluster Verification Utility (CVU) and RAC checks Division of Upgrade process into Non-downtime activities (like laying down the new Oracle Homes (OH), running checks) to Downtime Activities (like Upgrading Clusterware to GI, Upgrading RAC) there by lowering the downtime required. Ability to configure Back up and Restore options as a part of this upgrade process. You can choose to : a. Take Backup via this process (either Guaranteed Restore Point (GRP) or RMAN) b. Set the procedure to pause just before the upgrade step to allow you to take a custom backup c. Ignore backup completely, if there are external mechanisms already in place.  High Level Steps: Select the Procedure "Upgrade Database" from Database Provisioning Home page. Choose the Target Type for upgrade and the Destination version Pick and choose the Cluster, it picks up the complete topology since the clusterware/GI isn't upgraded already Select the Gold Image of the destination version for deploying both the GI and RAC OHs Specify new OH patch, credentials, choose the Restore and Backup options, if required provide additional pre and post scripts Set the Break points in the procedure execution to isolate Downtime activities Submit and track the procedure's execution status.  The animation below captures the steps in the wizard.  For step by step process and to understand the support matrix check this documentation link. Explore the functionality!! In the next blog, will talk about automating rolling Upgrades of Databases in Physical Standby Data Guard environment using Transient Logical Standby.

  Read the article

• What's the best way to install the GD graphics library for Nagios?

  - by user1196

  While trying to install Nagios 3.2.3, I ran their ./configure script and got these errors: checking for main in -liconv... no checking for gdImagePng in -lgd (order 1)... no checking for gdImagePng in -lgd (order 2)... no checking for gdImagePng in -lgd (order 3)... no checking for gdImagePng in -lgd (order 4)... no *** GD, PNG, and/or JPEG libraries could not be located... ********* Boutell's GD library is required to compile the statusmap, trends and histogram CGIs. Get it from http://www.boutell.com/gd/, compile it, and use the --with-gd-lib and --with-gd-inc arguments to specify the locations of the GD library and include files. NOTE: In addition to the gd-devel library, you'll also need to make sure you have the png-devel and jpeg-devel libraries installed on your system. NOTE: After you install the necessary libraries on your system: 1. Make sure /etc/ld.so.conf has an entry for the directory in which the GD, PNG, and JPEG libraries are installed. 2. Run 'ldconfig' to update the run-time linker options. 3. Run 'make clean' in the Nagios distribution to clean out any old references to your previous compile. 4. Rerun the configure script. NOTE: If you can't get the configure script to recognize the GD libs on your system, get over it and move on to other things. The CGIs that use the GD libs are just a small part of the entire Nagios package. Get everything else working first and then revisit the problem. Make sure to check the nagios-users mailing list archives for possible solutions to GD library problems when you resume your troubleshooting. ******************************************************************** Which package do I want? libgd2-xpm-dev? libgd2-noxpm-dev? php5-gd? I'm not looking to do any image processing myself - I just want to get Nagios working.

  Read the article

• SOA Community Newsletter September 2012

  - by JuergenKress

  Dear SOA partner community member Are you ready for Oracle Open World 2012? If you are planning to attend, make sure that you prepare your trip to San Francisco. If you could not make it, watch the keynotes live on-demand. You can also plan and decide to visit the SOA, Cloud and Service Technology Symposium 2012 and meet Tim Hall and Demed Lher from our product management team in London. As an Oracle partner you will get 50% discount on the conference pass, please use the code DJMXZ370 and avail your discount. The BPM Solution Catalogue is now live, make sure you use the process examples and contribute your processes. SOA Proactive support is the best resource to support your SOA implementations. To administrate your SOA systems Enterprise Manager Cloud Control 12c is the best tool, you can now attend thefree on-demand training. EM12c, Real User Experience Insight 12R1 gives you all the details, checkout our new demo. The BPM11g demo for Oracle E-Business Suite has become available. A wonderful SOA demo case is the Fusion Order Demo, Antony Reynolds posted an article how to update it on SOA Suite PS5. If you do use Coherence e.g. for SOA Suite, checkout the extension from our partner CloudTran. In this edition to this you will also find articles from: Automatically Disable Proxy Service to avoid overloading OSB By Jian Liang & Storing SCA Metadata in the Oracle Metadata Services Repository by Nicolás Fonnegra Martinez and Markus Lohn & Exploring MDS Explorer by Mark Nelson & Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL by Rajesh Raheja & Oracle Service Bus duplicate message check using Coherence by Jan van Zoggel & Installing Oracle SOA Suite10g on Oracle Enterprise Linux Lonneke Dikmans & Generating an EJB SDO Service Interface for Oracle SOA Suite by Edwin Biemond. Jürgen Kress Oracle SOA & BPM Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/soanewsSeptember2012 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• Data Generator Source Adapter

  This component needs little explanation. It generates random integer (DT_I4) and string (DT_WSTR) data and places them in the pipeline. You specify how many columns of each you would like and for any string columns you pass a fixed length value. You then need to specify how many rows in total you require to be generated. This component is used by us to do testing of the pipeline and components downstream. Previously we would have used a script component (as a source) to generate the rows but found ourselves rewriting the code too often so created this component. Screenshots SQL Server 2005 Integration Services SQL Server 2008/2012 Integration Services The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Data Generator Source from the list. Downloads The Data Generator Source Adapter is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Data Generator Source Adapter for SQL Server 2005 Data Generator Source Adapter for SQL Server 2008 Data Generator Source Adapter for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.30 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.29 - SQL Server 2008 February 2008 CTP. Includes support for upgrade of 2005 packages. Simplified user interface. (4 Mar 2008) Version 2.0.0.27 - SQL Server 2008 November 2007 CTP. String columns will now use the default system code page. Previously string columns always used 1252. (15 Feb 2008) SQL Server 2005 Version 1.1.0.23 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.0.0 - SQL Server 2005 IDW 16 Sept CTP. Public release. (6 Oct 2005)

  Read the article

• How to Make Objects Fall Faster in a Physics Simulation

  - by David Dimalanta

  I used the collision physics (i.e. Box2d, Physics Body Editor) and implemented onto the java code. I'm trying to make the fall speed higher according to the examples: It falls slower if light object (i.e. feather). It falls faster depending on the object (i.e. pebble, rock, car). I decided to double its falling speed for more excitement. I tried adding the mass but the speed of falling is constant instead of gaining more speed. check my code that something I put under input processor's touchUp() return method under same roof of the class that implements InputProcessor and Screen: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } And take note, at show() method , the view size from the camera is at 720x1280: camera_1 = new OrthographicCamera(); camera_1.viewportHeight = 1280; camera_1.viewportWidth = 720; camera_1.position.set(camera_1.viewportWidth * 0.5f, camera_1.viewportHeight * 0.5f, 0f); camera_1.update(); I know it's a good idea to add weight to make the falling object falls faster once I released the finger from the touchUp() after I picked the object from the upper right of the screen but the speed remains either constant or slow. How can I solve this? Can you help?

  Read the article

• Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

  - by Giri Mandalika

  An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

  Read the article

• Visual Studio 2010 Launch Events

  - by Jim Duffy

  Don’t miss out on the opportunity to learn about the new features in Visual Studio 2010. Check out the MSDN Events page and find out when the talented folks of the Developer & Evangelism group will be visiting your city to prove to you that /*Life Runs On Code*/. I’ll be attending the Raleigh event June 2, 2010 from 1:00 - 5:00 PM. North Carolina State University, Jane S. McKimmon Conference Center 1101 Gorman St Raleigh North Carolina 27606 United States From the Raleigh Event page: Event Overview Learn about the rich application platforms that Microsoft® Visual Studio® 2010 supports, including Windows® 7, the Web, SharePoint®, Windows Azure™, SQL®, and Windows® Phone 7 Series. From tighter tester and dev collaboration to new ALM tools, there’s a lot that’s new. Here’s what you can expect: Windows Development with Visual Studio 2010 Visual Studio has always been the best way to build compelling visual solutions for Windows. Visual Studio 2010 continues this trend with great new tooling support for Silverlight 4, WPF, and native development. In this demo heavy session, you’ll see how you can build rich Windows applications with Silverlight 4 using new trusted application features including out-of-browser execution, saving to the file system, and even COM Automation. You’ll also see how you can use the new Task Parallel Library from within a WPF application to take advantage of all those cores in today’s modern computers. Web and Cloud Development with Visual Studio 2010 If you build solutions for the web, then this session is for you. Come see how your existing skills move forward with Visual Studio 2010 both for in-house ASP.NET development and the new frontier of the Cloud. In this session, you’ll see improved designers, new HTML and JavaScript snippets, Web Forms enhancements, and how you can quickly build great web sites using Dynamic Data. You’ll see the changes made to testable web sites with MVC 2.0 and how we’ve integrated JQuery support into the platform. You’ll then see how easy it is to leverage your existing code and move to the cloud with Windows Azure. Windows Phone 7 Developer Tools and Platform Overview This session provides an overview of Visual Studio® 2010 for Windows Phone. Learn about the powerful capabilities of this new application platform and the developer tools experience including basic IDE usage, debugging, packaging, and deployment. This session also shows how you can use Microsoft Expression® Blend™ for Windows Phone to build great Silverlight applications. Have a day. :-|

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• ArchBeat Link-o-Rama for 2012-09-05

  - by Bob Rhubart

  OTN Architect Day - Boston - Sept 12: What to Expect If you've never attended an OTN Architect Day, here's a little preview. You start with a continental breakfast. Then you have keynotes by an Oracle expert, and a member of the Oracle ACE community. After that come the break-out sessions, so you have your choice of two sessions in each time slot. So you'll get in two breakouts before lunch. Then you eat. After that there's a panel Q&A during which the audience tosses questions at the assembled session speakers. Then it's on to another set of break-out sessions, followed by a short break. Then the audience breaks into small groups for round table discussions. After that there's a drawing for some cool prizes, followed by the cocktail reception. All that costs you absolutely zero. Register now. Starting and Stopping Fusion Applications the Right Way | Ronaldo Viscuso While the fastartstop tool that ships with Oracle Fusion Applications does most of the work to start/stop/bounce the Fusion Apps environment, it does not do it all. Oracle Fusion Applications A-Team blogger Ronaldo Viscuso's post "aims to explain all tasks involved in starting and stopping a Fusion Apps environment completely." Dodeca Customer Feedback - The Rosewood Company | Tim Tow Oracle ACE Director Tim Tow shares anecdotal comments from one of his clients, a company that is deploying Dodeca to replace an aging VBA/Essbase application. Configuring UCM cache to check for external Content Server changes | Martin Deh Oracle WebCenter and ADF A-Team blogger Martin Deh shares the background information and the solution to a recently encountered customer scenario. Proxy As Upgrade to 11g Does Not Like NQSession.User | Art of Business Intelligence "In Oracle BI 10g the application was a lot more tolerant of bad design and cavalier usage of variables," observes Oracle ACE Christian Screen. "We noticed an issue recently during an upgrade where the Proxy As configuration in Oracle BI 10g used the NQSession.User variable to identify the user logged into Presentation Servers acting as Proxy." Oracle WebLogic Server 11g: Interactive Quick Reference | Dirk Nachbar Oracle ACE Dirk Nachbar shares a quick post with information on a new interactive reference guide to Oracle WebLogic Server. "The Quick Reference shows you an architecural overview of the Oracle WebLogic Server processes, tools, configuration files, log files and so on including a short description of each section and the corresponding link to the Oracle WebLogic Server Documentation," says Nachbar. Thought for the Day "In fast moving markets, adaptation is significantly more important than optimization." — Larry Constantine Source: Quotes for Software Engineers

  Read the article

• Web Apps vs Web Services: 302s and 401s are not always good Friends

  - by Your DisplayName here!

  It is not very uncommon to have web sites that have web UX and services content. The UX part maybe uses WS-Federation (or some other redirect based mechanism). That means whenever an authorization error occurs (401 status code), this is picked by the corresponding redirect module and turned into a redirect (302) to the login page. All is good. But in services, when you emit a 401, you typically want that status code to travel back to the client agent, so it can do error handling. These two approaches conflict. If you think (like me) that you should separate UX and services into separate apps, you don’t need to read on. Just do it ;) If you need to mix both mechanisms in a single app – here’s how I solved it for a project. I sub classed the redirect module – this was in my case the WIF WS-Federation HTTP module and modified the OnAuthorizationFailed method. In there I check for a special HttpContext item, and if that is present, I suppress the redirect. Otherwise everything works as normal: class ServiceAwareWSFederationAuthenticationModule : WSFederationAuthenticationModule {     protected override void OnAuthorizationFailed(AuthorizationFailedEventArgs e)     {         base.OnAuthorizationFailed(e);         var isService = HttpContext.Current.Items[AdvertiseWcfInHttpPipelineBehavior.DefaultLabel];         if (isService != null)         {             e.RedirectToIdentityProvider = false;         }     } } Now the question is, how do you smuggle that value into the HttpContext. If it is a MVC based web service, that’s easy of course. In the case of WCF, one approach that worked for me was to set it in a service behavior (dispatch message inspector to be exact): public void BeforeSendReply( ref Message reply, object correlationState) {     if (HttpContext.Current != null)     {         HttpContext.Current.Items[DefaultLabel] = true;     } } HTH

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >