Search Results

Search found 45752 results on 1831 pages for 'ubuntu linux'.

Page 603/1831 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• Setup dhcpd without gateway on purpose

  - by MBober

  I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

  Read the article

• How can I setup my local Nginx server so I can edit the files?

  - by Shane Grant

  I have my local development machine running Arch Linux, Nginx, PHP-FPM and MySQL. In order for the websites I am working on to run the files need to be owned by the http user. The files are currently located in folders like this: /srv/http/site1/ /srv/http/site2/ When I use the following chown command on the http folder the sites work fine, but I cannot edit the files with my user: chown -R http.users /srv/http When I do this the sites do not work, but I can edit the files: chown -R shane.http /srv/http How can I make it so that my user can edit the files, and the web server can run them at the same time? Thank you

  Read the article

• What is the EGG environment variable?

  - by Randall

  A user on our (openSuSE) linux systems attempted to run sudo, and triggered an alert. He has the environment variable EGG set - EGG=UH211åH1ÒH»ÿ/bin/shHÁSH211çH1ÀPWH211æ°;^O^Ej^A_j<X^O^EÉÃÿ This looks unusual to say the least. Is EGG a legitimate environment variable? (I've found some references to PYTHON_EGG_CACHE - could be related? But that environment variable isn't set for this user). If it's legit, then I imagine this group has the best chance of recognizing it. Or, given the embedded /bin/sh in the string above, does anyone recognize this as an exploit fingerprint? It wouldn't be the first time we had a cracked account (sigh).

  Read the article

• Problems connecting Centos to the network when running in VMWare

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. I tried to configure VMWare to use a bridged connection as well as NAT connection. An image of Ubuntu runs fine on the same VMware. What am I missing here? Thanks.

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• Webserver security, intrusion detection, and file intregrity

  - by enfield

  I would like to add some type of tracking / alerting on some linux webservers running PHP and Apache. In doing searches I have come across a lot of info from 2006-2009. Would like to revisit things and see what others are doing now. The main purpose here is to track when any files are changed and if so alert me somehow. The same goes for IDS and hopefully something that can reside on same server? Since some of these are small scale projects I would prefer opensource/free solutions that are really effective. Although I would still like to hear of other alternatives if someone has the experience and the cost can be justified.

  Read the article

• Stop a particular key getting captured by rdesktop

  - by user18151

  Hello, I want F12 to be not capture by my rdesktop while in fullscreen, so that I can do whatever stuff I'm doing on my remote Windows computer, but pressing F12 would bring down yakuake, and I can type down my commands, or use vim etc for whatever I'm doing. Is there any possible way to do this? I tried playing with keymaps, but that didn't help. I set F12 to inhibit, but that seems to have stopped sending F12 altogether, rather than let gnome catch it and let yakuake pop up. Would be really grateful for answers. I am ready to do my homework, if someone could please just give me pointers etc. Thanks :). Sidenote: My current arranement stems from my large monitor in lab, and small personal laptop monitor, and the laptop has Windows 7. My lab computer has Linux, on which I do my coding work.

  Read the article

• Step by step USB Wi-Fi driver install for mint 15

  - by Andy

  I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

  Read the article

• Chef bootstrap giving 401 unauthorized

  - by loddy1234

  I'm trying to bootstrap a new chef node by running: knife bootstrap <server ip> -x lewis -N gitlab --sudo But I get the following output: [Mon, 03 Sep 2012 14:45:17 +0000] INFO: *** Chef 10.12.0 *** [Mon, 03 Sep 2012 14:45:17 +0000] INFO: Client key /etc/chef/client.pem is not present - registering [Mon, 03 Sep 2012 14:45:17 +0000] INFO: HTTP Request Returned 401 Unauthorized: Failed to authenticate. Ensure that your client key is valid. [Mon, 03 Sep 2012 14:45:17 +0000] FATAL: Stacktrace dumped to /var/chef/cache/chef-stacktrace.out [Mon, 03 Sep 2012 14:45:17 +0000] FATAL: Net::HTTPServerException: 401 "Unauthorized" My chef server is running Ubuntu 12.04 x32 and the machine I'm trying to bootstrap is running CentOS 6.3 x64 Any idea what's going wrong?

  Read the article

• Run Python Server at Startup

  - by DizzyDoo

  Hello, I've got a few Python based servers that I need to run, and would like them to start automatically when I start my Ubuntu Server box. What is the best way to execute them like this? I was hoping I could write a Bash script and use Screen to get them running in the background, where I can check on them every now and then, but where as echo screen -d -m python works just fine, echo screen -d -m `sudo python /home/matt/tornadoServer/tornadoDeploy.py` doesn't, with no error messages. Is that something to do with the spaces? Even though I did surround it with backquotes? I also tried: WEB="screen -d -m `sudo python /home/matt/tornadoServer/tornadoDeploy.py`" echo $WEB As a way of escaping the spaces, but no luck. What's Bash scripting way to do this? And, once the Bash script works, where can I put it to make it execute on startup?

  Read the article

• WINEHQ - wine_gecko won't init - HTML Rendering disabled

  - by Nick

  Hello Super Users, I'm currently trying to get a windows compiled program to work through Wine to run on Linux and MacOSX. When I run the program through wine, it prompts me to install Gecko which I do. Later on in the program, it attempts to use MSHTML to render HTML but I get these error messages on my console instead. err:mshtml:init_xpcom NS_InitXPCOM2 failed: 80004005 err:mshtml:HTMLDocument_Create Failed to init Gecko, returning CLASS_E_CLASSNOTAVAILABLE fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {25336920-03f9-11cf-8fd0-00aa00686f13}, hres is 0x80040111 I'm using Wine 1.1.34 and a similar bug was supposedly fixed in 1.1.33 http://bugs.winehq.org/show_bug.cgi?id=12578 I've been at this all afternoon, is there anything I'm missing? Thanks, Nick

  Read the article

• changing timezone with dpkg-reconfigure tzdata and debconf-set-selections

  - by Carlos Campderrós

  I want to set up a script that automatically changes the timezone on a machine (running ubuntu 11.10) and also sets the right values to the debconf database. I've tried the following, but it does not work (at the end, the current timezone remains unchanged, and if I run manually the dpkg-reconfigure tzdata command, the selected values are indeed the old ones): #!/bin/sh -e echo "tzdata tzdata/Areas select Europe" | debconf-set-selections echo "tzdata tzdata/Zones/Europe select Madrid" | debconf-set-selections echo "tzdata tzdata/Zones/America select " | debconf-set-selections dpkg-reconfigure -f noninteractive tzdata So, by now, I'm doing it messing with the files /etc/localtime and /etc/timezone directly, but I'd rather prefer the dpkg-reconfigure and debconf way.

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• What is the correct term for the number of bits used by an operating system

  - by benc

  Recently, some discussions came up about 32 bit vs. 64 bit implementations of operating systems. While I was composing a message about this topic, I realized that I did not know if there was a correct term for the number of bits supported by an operating system. For example, various versions of Solaris and Linux have 32bit and 64bit releases. Is the distinction "architecture"? In my experience, that has referred to chip types (Intel vs. PPC). Is it a "release"? Typically, I think of a release as a version number a consistent feature set, that might run on different architectures. Maybe it is just "architecture", after all, even though a chip family might have used several different bit sizes over time, the chips themselves are different when you jump from 32bit to 64bit.

  Read the article

• Why aren't Heroku syslog drains logging to rsyslogd?

  - by Benjamin Oakes

  I'm having a problem using syslog drains as described in https://devcenter.heroku.com/articles/logging. To summarize, I have an Ubuntu 10.04 instance on EC2 that is running rsyslogd. I've also set up the security groups as they describe, and added a syslog drain using a command like heroku drains:add syslog://host1.example.com:514. I can send messages from the Heroku console to my rsyslogd instance via nc. I see them appear in the log file, so I know there isn't a firewall/security group issue.  However, Heroku does not seem to be forwarding log messages to the server that heroku drains lists. I would expect to see HTTP requests, Rails messages, etc. Is there something else I can try to figure this out? I'm new to rsyslogd, so I could easily be missing something.

  Read the article

• clam anti-virus is slowing down my server performance significantly

  - by Scarface

  Hey guys, I just installed clam av http://sourceforge.net/projects/php-clamav/ for scanning file uploads on my linux VPN running php. The problem is that for some reason just initiating the extension in the php ini file slows down my entire network. Regular requests such as changing pages that should take less than 1 second take 5. Has anyone ever experienced this before or have a good virus scanning alternative for scanning file uploads? extension=clamav.so [clamav] clamav.dbpath="/usr/share/clamav" clamav.keeptmp=20 clamav.maxreclevel=16 clamav.maxfiles=10000 clamav.maxfilesize=26214400 clamav.maxscansize=104857600 clamav.keeptmp=0

  Read the article

• How can I use my laptop's monitor as my PC's ONLY monitor? [closed]

  - by Randell

  Possible Duplicate: Can I use my laptop as a second monitor for my desk computer? My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken. Update: This is different from Can I use my laptop as a second monitor for my desk computer? , because that question is asking how to use the laptop screen as the secondary display, not as the only display.

  Read the article

• Make own dial-up ISP using broadband connection [on hold]

  - by SkylarMT

  So, I see no reason why this wouldn't be possible. I have a Linux server (a Raspberry Pi to be exact) connected via Ethernet to a broadband ISP. I want to be able to dial a number, have it go through the normal telephone network, onto the Internet via a VoIP provider (I know you can call a Skype user from a landline), to my Raspberry Pi, and then have the Pi connect me to the Internet. I've found guides on making your own ISP, but they all involve a dedicated phone line on the server end. Is there a way to do this with no modem on the server end? I live in an area with a lot of people still on dialup, and if I pull this off I could make some extra money. Thanks!

  Read the article

• Monit wont start/stop any processes

  - by Vaughan Magnusson

  Hi, I've got monit running on a linux vserver, installed in a custom location /home/user/bin/monit as that is the only suitable location according to the webhost providers. When I installed monit I used ./configure --prefix=/home/user Monit itself runs, and sends me emails of it's activity, and the control file syntax is correct. However, monit cannot seem to start or stop anything - or even run the simplest of scripts. eg. Using 'monit stop all', I try to run the following stop command stop = "/bin/bash /home/user/simple_script.sh" Which fails (and says so in the log). I cant figure out why this is failing, can anyone help with this?

  Read the article

• No free disk space ;[

  - by skomak

  Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

  Read the article

• Figure out what non-symlink path would be?

  - by David Mackintosh

  On Linux, if I've cd'd around and am now in a directory, is there a way to figure out what the real path to that directory is if I had not used a symbolic link to get there? Consider: $ pwd /home/dave/tmp $ mkdir -p 1/2/3/4/5 $ ln -s 1/2/3/4/5 5 $ cd 5 $ pwd /home/dave/tmp/5 Or: $ pwd /home/dave/tmp $ mkdir -p 1/2/3/4/5 $ ln -s 1/2/3/4 4 $ cd 4/5 $ pwd /home/dave/tmp/4/5 Is there any way to figure out that /home/dave/tmp/5 is really /home/dave/1/2/3/4/5 ?

  Read the article

• Why is scp not overwriting my destination file?

  - by Noli

  I'm trying to back up a file via the command scp /tmp/backup.tar.gz hostname:/home/user/backup.tar.gz When I run it, the scp progress bar shows up and it looks like its transferring the file, however when I log into the destination server to check the file, the timestamp and filesize haven't changed from the older version, so it looks like scp didn't overwrite the old file at all. It only sees to work when I manually delete the file from the destination server. I'm running ubuntu, and this is happening on two servers: one cygwin ssh, and one fedora core 3. Anyone have any idea why this is happening? I thought scp would ONLY overwrite existing files.. Thanks

  Read the article

• Redirect one input from one terminal to another

  - by Niki Yoshiuchi

  I have sshed into a linux box and I'm using dvtm and bash (although I have also tried this with Gnu screen and bash). I have two terminals, current /dev/pts/29 and /dev/pts/130. I want to redirect the input from one to the other. From what I understand, in /dev/pts/130 I can type: cat </dev/pts/29 And then when I type in /dev/pts/29 the characters I type should show up in /dev/pts/130. However what ends up happening is that every other character I type gets redirected. For example, if I type "hello" I get this: /dev/pts/29 | /dev/pts/130 $ | $ cat </dev/pts/29 $ el | hlo This is really frustrating as I need to do this in order to redirect the io of a process running in gdb (I've tried both run /dev/pts/# and set inferior-tty /dev/pts/# and both resulted in the aforementioned behavior). Am I doing something wrong, or is this a bug in bash/screen/dvtm?

  Read the article

• permission denied when trying to execute a binary I burned to a CD-R

  - by user16654

  On a UBUNTU karmic machine, I burned a cd from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso The CD now contains an executable and some files. I tested the cd by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message: bash: ./FPS1_1: Permission denied I can open other files like text documents (the executable also comes with shared libraries). I realized I had burned the cd as root so I burned another one as another user but I still got the same problem. How can I remove this permission or what is the problem? P.S. the image was in / if that helps

  Read the article

• Keyboard layout for mathematical/Greek symbols

  - by David

  I've been wondering about this for a long time but never thought to ask: I do a lot of scientific work so there are many times it would be really handy to be able to type mathematical symbols or Greek letters which, for the most part, aren't part of the ASCII character set. Like "8 µ ? s t ? ? … v ? = = ±" and so on. Is there a keyboard layout (for Linux) that maps simple key combinations to these kinds of characters? (Assuming all the encoding and font issues are worked out properly) I know I could create one myself but it'd be a lot easier if someone's already done the work, or at least if there's a partial solution I could modify.

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >