Search Results

Search found 24726 results on 990 pages for 'message passing'.

Page 605/990 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

• nvidia-settings error: nvidia driver not in use

  - by Bastarasov

  I have an Asus with GEFORCE GT520M CUDA (Optimus) and I am running Kubuntu 12.04, 64bit. I am trying to connect an external monitor through DVI and the monitor is not detected. Nvidia settings dont show properly and each time I fire them up there is a warning message: "You do not appear to be using the NVidia X driver. Please, edit...." (you probably know it and heard of this before). I have googled a lot and I have tried some things out but no luck so far. Is there a solution which has worked for someone out there? If so, please be very specific about what I need to do since I am really not good at using the terminal and generally new to ubuntu. I can use the terminal only to copy-paste things. :) Thanks in advance to everyone! ps. Seems like some people dealt with this by fixing the Nvidia settings problem but the instructions have never been clear enough for me to be able to understand.

  Read the article

• HP DL380 G5 Predictive Drive Failure on a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• Zimbra Relaying from Postfix connection timed out sending multiple emails?

  - by liamTc

  I have a web server setup with postfix which is relaying email to a zimbra server. This working fine however I have attempted to send a few thousand emails and now the connection from postfix to zimbra is timing out. All of the emails have been deferred on the postfix queue. If I try to send individual emails from postfix to zimbra it works fine. But if I try to flush the postfix queue all of the emails time out. In mail.log the emails look like this: postfix/error[2494]: 32B0950C04: to=, relay=none, delay=19431, delays=19402/29/0/0.01, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to mail.server.com[123.45.678.91]:25: Connection timed out) I have also noticed that in the above message it says "relay=none" for these emails that are failing. But the emails that do send say "relay=domainname.com". How I can resolve this, by sending the emails in the queue and avoiding this from happening again?

  Read the article

• Large temp files created in Windows Server 2003 temp folder

  - by BlueGene

  I'm managing a Windows Server 2003 with around 30 GB space in primary partition. A couple of times the server has crashed with error message saying that the C: drive is full. After searching folders to free up space, I found that lot of temp files being created in C:\WINNT\Temp and some of them of enormous size with more than 2GB. The temp files have common name, Efs###.tmp. Since we encrypt files frequently using Windows's EFS, I initially suspected Windows encryption. But after reading the documentation, I found that Efs###.tmp are in fact created by EFS but they are created only under the folder which you're currently encrypting, not in Temp folder. This looks very strange since Efs##.tmp files shouldn't be created under C:\WINNT\Temp unless someone tried to encrypt that Temp folder itself. The server has Tivoli Backup client. Could that be messing with windows Encryption? Can anyone shed some light on what could be causing the issue?

  Read the article

• What is the aim of this email? Is this a ping/sping? [closed]

  - by mplungjan

  Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

  Read the article

• Logon Failure: the target account name is incorrect after making a ghost image of a server

  - by cop1152

  I recently replaced a failing SCSI drive in a Windows 2000 server with an IDE drive. I made an image of the SCSI drive and Ghosted it. The purpose of the machine was to give out DHCP at one location and host a couple of files. When I restarted the machine with the new drive, DHCP appears to be working fine, but I cannot get to any of the shares. Instead, I get the following message when attempting to navigate using Explorer. Logon Failure: the target account name is incorrect It appears that this machine is not communicating with the main domain controller. Changes to user accounts (performed on the domain controller) are not replicated on this machine.

  Read the article

• Where are Credentials stored for Network Drives on WinXP?

  - by Tom Tresansky

  I have a drive mapped to a folder on a remote machine that I connect to using the Cisco VPN client. The password to the Windows account I use on that remote machine has changed. I had stored the username/password locally, using Window's remember my password feature, so I wouldn't have to enter it every time (the enter user/password login dialog used to appear each time I attempted to open the remote folder, and I would have to look up and enter my credentials). The password to that remote Windows account has changed. Now, I am no longer prompted to enter a user name / password, but instead, upon trying to open the remote folder, receive a message: unknown user name or bad password. How do I view and change these stored credentials?

  Read the article

• Can't login to SQL Server after moving machine to different office/domain

  - by Dan

  Our company has just been bought and the over the weekend I have brought up the last few machines to plug into their network (they are under a different Windows Domain). The last machine is our Vault system and the SQL Server was using Windows Authentication. I have plugged it into their network and its working fine, but i cannot connect to SQL Server with Management Studio and, I fear, no backup jobs will also be working. When I try to login under Windows Auth, it has the user name of "NEWDOMAIN\Administrator" (greyed out) and then presents a "login failed" message with error code "18456". Can anyone help me with this, or will I just have to reinstall SQL Server, Vault and restore the backup I took before the move?

  Read the article

• Server 2008 won't run executables from CMD prompt without .exe extension

  - by Dan

  On one of our production server 2008 boxes, I cannot run executables from a CMD prompt without supplying the full filename, including the '.exe' extension. For example, when running "java" produced the usual "is not recognized as an internal or external command" message, I assumed I had borked the path and/or java_home variables. However, even navigating to the %java_home%\bin directory and typing "java" produced the same error. If I type "java.exe" instead, all works perfectly. The problem does not only affect java.exe. Even Microsoft executables suffer the same problem -- ping fails, ping.exe works; ipconfig fails, ipconfig.exe works; manually created batch file 'test' only works when invoked explicitly as 'test.bat'. Any bright ideas?

  Read the article

• How much knowledge do I need to begin a project in Django

  - by Smock

  I started learning django about a month ago. I have an intermediate C, Java programming experience. I read the first 8 chapters of the django book . Afterwards, I picked up Practical Django Projects by James Bennett and did the first two projects: CMS & Web Blog. Although, I started getting lost when he got to the generic views part. I know that's important but I'm not sure how important that is when trying to implement a project. Anyway, I have a project in mind that I'd like to start; however, I'm nervous as to where to begin. I'm overwhelmed with the number of things that I'd like my project to do but no knowledge or minimal knowledge as to how e.g. how do i implement css and javascript in my project. Moreover, I am aware that some django packages exists to ease development but I don't know if I should use them or not. Anyway, I apologize for my length message. I just want some advice/encouragement. I have a project in mind but do you think I need to read more materials/tutorials or is it smart to just start working on my project based on the minimal knowledge i've gained from those books? Any information that can be provided is much appreciated. I really want to get good at this but I just need some direction.

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

• PC won't boot / USB and PS2 keyboards don't work

  - by Truncheon

  My brother's PC has stopped working. He now cannot boot into windows, and he can't access BIOS by pressing the DEL key as no keyboards work. He has tried 4 different keyboards, one of which is PS/2. He tried the USB keyboards on all the USB ports. I don't know why the BIOS would show the message "Floppy disks fail (40)", as there is no floppy disk drive in the PC. He has upgraded from XP to Vista (yes that's right, upgraded keeping the XP drivers, eyes roll). A BSOD occurred in Vista while he was browsing files. What steps should be taken to troubleshoot the problem?

  Read the article

• How do I make my Boot Camp partition bootable again?

  - by Dan Herbert

  I needed to resize my Boot Camp partition so I used Gparted to move and resize it. This seemed to work, except that now I can't boot into Windows. I can boot into OS X just fine. OS X can recognize the Boot Camp partition and view its contents. When I try to reboot into Windows, however I get the message: No bootable device -- insert boot disk and press any key The only solutions I've been able to find online suggest that the only way to fix this is to either clone the drive or remove the Windows partition and re-install it. Is there any way to fix my Windows partition so that I don't have to reinstall Windows again?

  Read the article

• install red5 demos via installer or within war file manually

  - by dursunturan

  I'm using Ubuntu 10.10 and installed the red5-server package. I've also downloaded oflaDemo.war file from that address. First I tried to install the oflaDemo via installer, but I couldnt reach the goal. I see the .war file under the /tmp directory, I got stuck with this message: "This may take a couple minutes, please wait". After that, I put the downloaded war file into the /webapps directory and wait 10 minutes as mentioned in red5-common.xml. Unfortunately, nothing changed ... So I decided to extract war file manually. I did this: jar -xvf oflaDemo.war Ok, I see all of the unzipped content under the webapps directory, but how can I preview the demo via a web browser? I really need to make live stream via Red5. Please help me.

  Read the article

• setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

  - by kostmo

  I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

  Read the article

• How to forward AIM to Gmail

  - by iamjames

  Still have an old AIM email address lying around and would like to forward it to Gmail?  Here's how: 1.  Login to your AIM and click on Settings on the far right 2.  In the left menu click IMAP and POP  3.  This shows you your IMAP and POP setup information for AIM.  We're going to put this into your Gmail account so your Gmail account will check your AIM account and download all AIM emails. 4.  Login to your Gmail, click Settings and click Accounts and Import 5.  Click "Import mail and contacts".  A new window will pop up asking what account you want to import.  Enter your AIM Email Address and click Continue 6.  The next page asks for your password.  Enter your password and click Continue.  Step 2 asks your Import options.  I'd put a checkmark in "Leave a copy of retrieved message on server".  That way all your mail is still stored on AIM if you ever need it. 7.  Click Start import and you're done.  Next screen says it make take several hours up to 2 days before you start seeing imported messages and can check the status at Settings > Accounts and Import

  Read the article

• Want to add a new domain to my postfix, but mails not delivered (mail look back to myself)

  - by user74850

  Hi everybody, My host relay is working but I was aksed to add a new domain (like external.example.com). I have added in main.cf the new fqdn in relay_domains relay_domains = $mydestination, example.com,example2.com, externe.example.com and in transport example.com smtp:[192.168.1.22] example2.com smtp:[192.168.1.22] external.example.com smtp:[192.168.1.22] Mails sent to users with example.com and example2.com domain are well delivered. But for mails to external.example.com i got this message Mar 17 16:47:52 relayhost postfix/smtp[11948]: 754E1876A01: to=<[email protected]>, relay=relayhost2.example.com[80.81.82.83]:25, delay=19555, delays=19525/0.01/30/0, dsn=4.4.6, status=deferred (mail for external.example.com loops back to myself) I read another Q/A about the same issue right here, but it's not helping me. Can you ?

  Read the article

• Recovering from an incorrectly deployed robots.txt?

  - by Doug T.

  We accidentally deployed a robots.txt from our development site that disallowed all crawling. This has caused traffic to dip dramatically, and google results to report: A description for this result is not available because of this site's robots.txt – learn more. We've since corrected the robots.txt about a 1.5 weeks ago, and you can see our robots.txt here. However, search results still report the same robots.txt message. The same appears to be true for Bing. We've taken the following action: Submitted site to be recrawled through google webmaster tools Submitted a site map to google (basically doing everything possible to say "Hey we're here! and we're crawlable!") Indeed a lot of crawl activity seems to be happening lately, but still no description is crawled. I noticed this question where the problem was specific to a 303 redirect back to a disallowed path. We are 301 redirecting to /blog, but crawling is allowed here. This redirect is due to a site redesign, wordpress paths for posts such as /2012/02/12/yadda yadda have been moved to /blog/2012/02/12. We 301 redirect to wordpress for /blog to keep our google juice. However, the sitemap we submitted might have /blog URLs. I'm not sure how much this matters. We clearly want to preserve google juice for URLs linked to us from before our redesign with the /2012/02/... URLs. So perhaps this has prevented some content from getting recrawled? How can we get all of our content, with links pointed to our site from pre-and-post redesign reporting descriptions? How can we resolve this problem and get our search traffic back to where it used to be?

  Read the article

• Where does linux look for shared libs?

  - by EsbenP

  I am trying to get the ar command on an embedded ARM computer running linux. I want to install debian and openjdk. It is a headless system. This is a custom linux distribution provided by the hardware manufacturer. The debian installer is missing the ar command so i tried copying the binaries from the debian package, but when running ar I get error while loading shared libraries: libbfd-2.18.0-multiarch.20080103.so: cannot open shared object file: No such file or directory libbfd is also in the package. I tried linking it to /lib and /usr/lib but I get the same message when running. What is the best way to get debian and ar on a custom linux distro?

  Read the article

• Qnap won't connect to Windows Share

  - by thetrashcan

  I have a qnap nmp-1000 in my network and would like to stream my films from my win7 laptop to the nmap-1000 device. I just managed to do so with upnp sharing, but I would like to, for security reasons, share my files over a shared folder which is password protected. My problem is when I'm searching for devices on my network with the qnap then it won't find any. When I try to mount a remote disk on my qnap it will just fail with an connection failed message. But when I try to connect to the qnap device with my laptop, it does this succesfully. Can someone guide me through on how to get my setup working?

  Read the article

• Running OLEDB VB6 Windows Progam Under Wine

  - by Beaner

  I'm trying to install a VB6 Windows program that uses OLEDB to access VFP tables to run under Wine 1.0.1 on Ubuntu 9.10. Wine is configured to Windows version Windows XP. The program install ran okay, and I used winetricks to install MDAC 2.8 and JET 4.0 sp7. I also installed Microsoft's vfpoledb and vfpodbc drivers. The application starts and displays an error message, item cannot be found in the collection corresponding to the requested name or ordinal. Does anyone have an idea how to fix this?

  Read the article

• Office 2007 network share access denied

  - by Rodent43

  Hope I have not duplicated an issue already posted but I could not find anything from the search... Right here is the problem, we have recently updated all our desktops to the MS Office 2007 suite and people have issues trying to open simple files like word documents... the systems are Windows XP (SP3) Novell Network with novell client Office 2007 when they try to open a word document from a usual network share word presents a message reporting Access Denied Contact Administrator So we assumed network permissions, none of which have changed...so try the same file with Wordpad and it opens fine, be it with formating issues of course... Now copy the file to your desktop, which is not redirected, and you can open the file in word as normal... so does anyone know if office 2007 uses some new permission when opening files? does it create temps or something... any pointers would be appreciated

  Read the article

• Send mail from a distrobution groups email adress

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us send email using the distrobution groups email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• Mac: Script application downloaded from the Internet

  - by Svish

  I downloaded a php framework and has started to make a website using that. Sometimes I need to look at the source of that framework and every time I open a file I haven't opened before I get this message: “somefile.php” is a script application which was downloaded from the Internet. Are you sure you want to open it? That is ok and nice I suppose, but I am getting tired of it. Is there a way I can fix all the files in my web directory so that the os somehow forgets the files are from the Internet or something like that?

  Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >