Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 608/627 | < Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• CodePlex Daily Summary for Saturday, August 23, 2014

  CodePlex Daily Summary for Saturday, August 23, 2014Popular ReleasesDIII Save Editor: ROS Alpha 1.2.14.100: initial Ros alpha release please report all bugsSEToolbox: SEToolbox 01.044.014 Release 2: Fixed Ship name not saving. Fixed broken cubes view Bug. Fixed cast VRage.MyFixedPoint error when opening games with Meteors. Added checkbox when Importing 3d model to Export ship, to fill it as solid.CS-Script Source: Release v3.8.5: Fixed problem with the warnings getting hidden in case of the successful compilation cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationOutlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.MSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksExchange Database Recovery With and Without Log Files is Possible: Exchange Recovery Application: This Exchange Recovery Software comes with free trial edition which helps users to inspect the working capability of the recovery process. Download free demo version and repair inaccessible mailboxes from EDB file without any obstructions.Linq 4 Javascript: Version 2.4: Minor Changes Made Added Count() and Count(with where clause) Distinct will now use a dictionary instead of a custom dictionary object Organize the unit tests. The variable names will actually make sense and won't be 2 letters. SelectMany will now use the queryable logic.Office / SharePoint 2013 Continuous Integration with TFS 2012: 1.1.0.1: Fixed the following issues in TfsDropDrownloader: Updated to make it work with VS 2013 (including VS 2013 updates) in addition to VS2012. Extend the timeout of downloading drops from 100 seconds to 1 hour. Added more trouble shooting information in the output.CRM Solution CommandLine Helper: CRM Solution Cmd Helper 1.0.0.4: Includes : - Bug fix = Export argument validation : check directory path existence (thanks mszlapa)Office To PDF: OfficeToPDF 1.4: Adds support for additional file types: * mpp (requires MS Project >= 2010) * vsdx, vsdm (requires MS Visio >= 2013) * csv * odt, odc, odp * pot, potm, potx Improves stability and clean removal of COM objects. Adds new flags: * /verbose - to be more verbose when running * /markup - to allow document markup in the PDF when converting Word documents * /excel_max_rows - adds a maximum limit on the number of rows a worksheet can contain when converting Excel documents * /pdfa - crea...MongoRepository: MongoRepository 1.6.6: Installing using NuGet (recommended)MongoRepository is now a NuGet package for your convenience. Step-by-step instructions can be found in Installing MongoRepository using NuGet Installing using BinariesYou can also choose to download the binaries instead of using NuGet. There are 2 downloads: mongorepository_full.x.x.x contains all binaries required (MongoRepository and the 10gen C# driver) mongorepository.x.x.x contains only the MongoRepository binary Make sure you reference MongoReposit...Cryptography Enumerations JavaScript Shell: Cryptography Enumerations JavaScript Shell 1.0.0: First ReleaseCMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...New Projects3D Projectile: A 3D Projectile program showing the motion of a ballASP.NET Web Application Starter Kit: This project template is an ASP.NET solution skeleton for a typical web application or single-page application (SPA).Behaving - Behaviour Tree for C#: Behaviour is a Behaviour Tree implementation in C#.Kinect Stream Saver Application _SDK 2: This application is developed based on a sample called "ColorBasics-D2D C++" developed by Microsoft corporation. (Compatible with SDK 2: K4W v2 Dev Preview)MVC Bootstrap Paginator: The MVC Bootstrap Paginator is lightweight and easy to use. It's works out of the box and requires minimal configuration.NuGet Reference Switcher: NuGet Reference Switcher is a Visual Studio extension which can be used to automatically switch NuGet DLL references to project references and vice-versa. QKit: A WP8.1 library that provides various controls and classes that will help developers quickly and easily augment their apps to behave more like native apps.SharePoint 2013 Document Icon Linker: Links the document icon in library views to the document.SharePoint Autocomplete People Search: SharePoint People SearchWADM: WADM

  Read the article

• Can I use the same machine as a client and server for SSH?

  - by achraf

  For development tests, I need to setup an SFTP server. So I want to know if it's possible to use the same machine as the client and the server. I tried and I keep getting this error: > Permission denied (publickey). > Connection closed and by running ssh -v agharroud@localhost i get : > OpenSSH_3.8.1p1,OpenSSL 0.9.7d 17 Mar > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to localhost [127.0.0.1] port 22. > debug1: Connection established. > debug1: identity file /home/agharroud/.ssh/identity type -1 > debug1: identity file /home/agharroud/.ssh/id_rsa type 1 > debug1: identity file /home/agharroud/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 > debug1: match: OpenSSH_3.8.1p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex:server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'localhost' is known and matches the RSA host key. > debug1: Found key in /home/agharroud/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT > received > > ****USAGE WARNING**** > > This is a private computer system. This computer system, including all > related equipment, networks, and network devices (specifically > including Internet access) are provided only for authorized use. This > computer system may be monitored for all lawful purposes, including to > ensure that its use is authorized, for management of the system, to > facilitate protection against unauthorized access, and to verify > security procedures, survivability, and operational security. Monitoring > includes active attacks by authorized entities to test or verify the > security of this system. During monitoring, information may be > examined, recorded, copied and used for authorized purposes. All > information, including personal information, placed or sent over this > system may be monitored. > > Use of this computer system, authorized or unauthorized, > constitutes consent to monitoring of this system. Unauthorized use may > subject you to criminal prosecution. Evidence of unauthorized use collected > during monitoring may be used for administrative, criminal, or other > adverse action. Use of this system constitutes consent to monitoring for > these purposes. > > debug1: Authentications that can continue: publickey > debug1: Next authentication method: publickey > debug1: Trying private key:/home/agharroud/.ssh/identity > debug1: Offering public key:/home/agharroud/.ssh/id_rsa > debug1:Authentications that can continue:publickey > debug1: Trying private key:/home/agharroud/.ssh/id_dsa > debug1: No more authentication methods to try. > Permission denied (publickey). Any ideas about the problem ? thanks !

  Read the article

• a friendly elaboratation on how iceweasel misses as recent request was discovered in post tut

  - by v3x3n

  I would like to specify what you asked about in how iceweasel misses on in hopes that you are interested in considering the answer to be valid considering the package should run efficient to a novice user especially when getting a first impression on a new software, browser, or package they are given by default. First let me say that I am very grateful for all debian has and continues to do for its user base and I am not complaining, only hoping that in mentioning such it will eventually aid in improving the disappointing experience iceweasel gave me in multiple ways right from the start of using it. I am sure tremendous amounts of hard work went into making it work as well as it does, and tremendous effort continues to go into IW like the rest of the package and distros such as this... Having said that, I do aim to keep my examples simple as possible but also explained in enough detail as to not leave out important info to get a full idea of my issue... (Thanks for understanding if I sound novice to debian, I am but continue to learn and advance by trial and error each day, and of course the wonderful help from all the great minds available here and there)... Well, my bone to pick (unfortunately as I disdain being a complainer when so much has been done for us, the end user) with IW is mainly 3 immediately noticed problems in offering me a smooth test drive (completely normal browsing conduct of your average user, I should indicate) as soon as I started out a task using IW (heading directly to google images and searched for a few web sized images, then saved a few (no more than 800 to 900 in dimensions, typically a normal procedure I would imagine) I experienced a horrendous reoccurring freeze and lag time that almost left me to kill the process more than once on each attempt and continued to compound so that by a few attempts later, even 1 single image save locked up the entire browser, ultimately giving up on my procedure in its simplicity with a bit of aggravation, if there was something I had done wrong on my end pre-attempt or during installation. Secondly, visiting video player sites in this case youtube will not allow for any video feed to play whatsoever and again, experienced a slight freezing that eventually dissipated as long as I didn't attempt to press play or reload another video trial... Very annoying and possibly related to my first issue (which could rely on my own lack of knowledge in setup config, but that troubles me if so).... Lastly as another user has stated already, in which brought you to ask them what exactly seemed to be the problem in the first place is also my final straw that broke the weasel's back, leading me here to find a solution to a updated version of firefox... being that iceweasel (an apparent build of firefox 17.x.x) leaving the user to find themselves out of luck when installing their favorite or much useful add-ons or plugins that aid their task or normal usage online.... As the other user clearly stated... there is almost zero options and barely any luck to find compatible plugins with such an outdated version still being used... I can only imagine if as a novoice or standard user to linux... and beginner to debian (which I am all for btw!) if I am discovering major conductivity issues which hinder normal user conduct right off the bat... that there is probably a bundle or more of security vulnerabilities that would unravel to me if I continued to give mr Hommey's package any further attention, or interest in continuing to use... This is a deal breaker on any account, unless all 3 of these issues stated are due to a very n00berish setting or lack thereof (which if that is the case, such was not properly stated for beginner in any place available by following installation tutorials such as LVM installers, which I felt lacked a clear understanding to someone who is trying to learn why and how, rather than, a fix to a potentially broken out of box installation... I really think that is irrelevant in any case however, as there is much step by step support regarding that kind of thing, just saying... its very challenging, along side a job to keep deadlines on, and the need to learn a better and more costomizible system, that was not as popularized when I became a dev via windows (OK OK I know thats a huge mistake and now I am way off original topic but anyway) Thanks very much for taking the time to read over this, and I hope it honestly gives you a few good and valid reasons for users wanting and seeking a way to get around iceweasel altogether... Finally, if I am missing something vital that renders all I've stated invalid or useless, please feel free to shove that elephant in the room my direction! Thanks for all you do, as I am sure it is very useful and dedicated, being you are a debian maintainer, and super user! Much love for intelligence, freedom and sharing the secrets of the web! May it remain unregulated and a good place to grow and learn for generations to come! Stay true! Take care now! -v3x (v3x @ gmx .com)

  Read the article

• Rotate triangle so that its tip points in the direction of the point on the screen that we last touched

  - by Sid

  OpenGL ES - Android. Hello all, I am unable to rotate the triangle accordingly in such a way that its tip always points to my finger. What i did : Constructed a triangle in by GL.GL_TRIANGLES. Added touch events to it. I can rotate the triangle along my Z-axis successfully. Even made the vector class for it. What i need : Each time when I touch the screen, I want to rotate the triangle to face the touch point. Need some help. Here's what i implemented. I wonder that where i am going wrong? My code : public class Graphic2DTriangle { private FloatBuffer vertexBuffer; private ByteBuffer indexBuffer; private float[] vertices = { -1.0f,-1.0f, 0.0f, 2.0f, 0.0f, 0.0f, -1.0f, 1.0f, 0.0f }; private byte[] indices = { 0, 1, 2 }; public Graphic2DTriangle() { ByteBuffer vbb = ByteBuffer.allocateDirect(vertices.length * 4); vbb.order(ByteOrder.nativeOrder()); // Use native byte order vertexBuffer = vbb.asFloatBuffer(); // Convert byte buffer to float vertexBuffer.put(vertices); // Copy data into buffer vertexBuffer.position(0); // Rewind // Setup index-array buffer. Indices in byte. indexBuffer = ByteBuffer.allocateDirect(indices.length); indexBuffer.put(indices); indexBuffer.position(0); } public void draw(GL10 gl) { gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertexBuffer); gl.glDrawElements(GL10.GL_TRIANGLES, indices.length, GL10.GL_UNSIGNED_BYTE, indexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); } } My SurfaceView class where i've done some Touch Events. public class BallThrowGLSurfaceView extends GLSurfaceView{ MySquareRender _renderObj; View _viewObj; float oldX,oldY,dX,dY; final float TOUCH_SCALE_FACTOR = 0.6f; Vector2 touchPos = new Vector2(); float angle=0; public BallThrowGLSurfaceView(Context context) { super(context); // TODO Auto-generated constructor stub _renderObj = new MySquareRender(context); this.setRenderer(_renderObj); this.setRenderMode(RENDERMODE_WHEN_DIRTY); } @Override public boolean onTouchEvent(MotionEvent event) { // TODO Auto-generated method stub touchPos.x = event.getX(); touchPos.y = event.getY(); Log.i("Co-ord", touchPos.x+"hh"+touchPos.y); switch(event.getAction()){ case MotionEvent.ACTION_MOVE : dX = touchPos.x - oldX; dY = touchPos.y - oldY; if(touchPos.y > getHeight()/2){ dX = dX*-1; } if(touchPos.x < getWidth()/2){ dY = dY*-1; } _renderObj.mAngle += (dX+dY) * TOUCH_SCALE_FACTOR; requestRender(); Log.i("AngleCo-ord", _renderObj.mAngle +"hh"); } oldX = touchPos.x; oldY = touchPos.y; Log.i("OldCo-ord", oldX+" hh "+oldY); return true; } } Last but not the least. My vector2 class. public class Vector2 { public static float TO_RADIANS = (1 / 180.0f) * (float) Math.PI; public static float TO_DEGREES = (1 / (float) Math.PI) * 180; public float x, y; public Vector2() { } public Vector2(float x, float y) { this.x = x; this.y = y; } public Vector2(Vector2 other) { this.x = other.x; this.y = other.y; } public Vector2 cpy() { return new Vector2(x, y); } public Vector2 set(float x, float y) { this.x = x; this.y = y; return this; } public Vector2 set(Vector2 other) { this.x = other.x; this.y = other.y; return this; } public Vector2 add(float x, float y) { this.x += x; this.y += y; return this; } public Vector2 add(Vector2 other) { this.x += other.x; this.y += other.y; return this; } public Vector2 sub(float x, float y) { this.x -= x; this.y -= y; return this; } public Vector2 sub(Vector2 other) { this.x -= other.x; this.y -= other.y; return this; } public Vector2 mul(float scalar) { this.x *= scalar; this.y *= scalar; return this; } public float len() { return FloatMath.sqrt(x * x + y * y); } public Vector2 nor() { float len = len(); if (len != 0) { this.x /= len; this.y /= len; } return this; } public float angle() { float angle = (float) Math.atan2(y, x) * TO_DEGREES; if (angle < 0) angle += 360; return angle; } public Vector2 rotate(float angle) { float rad = angle * TO_RADIANS; float cos = FloatMath.cos(rad); float sin = FloatMath.sin(rad); float newX = this.x * cos - this.y * sin; float newY = this.x * sin + this.y * cos; this.x = newX; this.y = newY; return this; } public float dist(Vector2 other) { float distX = this.x - other.x; float distY = this.y - other.y; return FloatMath.sqrt(distX * distX + distY * distY); } public float dist(float x, float y) { float distX = this.x - x; float distY = this.y - y; return FloatMath.sqrt(distX * distX + distY * distY); } public float distSquared(Vector2 other) { float distX = this.x - other.x; float distY = this.y - other.y; return distX * distX + distY * distY; } public float distSquared(float x, float y) { float distX = this.x - x; float distY = this.y - y; return distX * distX + distY * distY; } } PS : i am able to handle the touch events. I can rotate the triangle with the touch of my finger. But i want that ONE VERTEX of the triangle should point at my finger position respective of the position of my finger.

  Read the article

• CodePlex Daily Summary for Tuesday, August 19, 2014

  CodePlex Daily Summary for Tuesday, August 19, 2014Popular ReleasesVG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksLinq 4 Javascript: Version 2.4: Minor Changes Made Added Count() and Count(with where clause) Distinct will now use a dictionary instead of a custom dictionary object Organize the unit tests. The variable names will actually make sense and won't be 2 letters. SelectMany will now use the queryable logic.Magick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeNew Projectsangle.works: Angle.works sample solutionAutomatically Update CMS from SCOM: Microsoft Central Management Server (CMS) was released with SQL Server 2008; however keeping the server list up-to-date is challenging.BLE for NETMF: Class library targeted to .NET Micro Framework for BLE support (both central and peripheral profiles).CIIS: ciisClipboard Calculator: Simple tool to calculate numbers from the clipboard. Useful for SQL Server Management Studio User.CYCLOPS: CYCLOPS is a project that seeks to aid the development and testing of ANPR software. CYCLOPS provides a virtual camera and virtual frame grabber for image procedemo4: demo4eAsset: Web based Fixed Asset Management SystemEFML-Runtime: Create applications with xml,css,js feeadmin: Complete fee managementFinal Fantasy VI Randomizer: This is a simple program that randomizes skills, items, and characters in Final Fantasy VI. It is used for racing the game.Object Editor: Object Editor is a visual editor which allows to edit any properties of any class and to simplify the changing and displaying of a class instance.pbb: Pinoy Badminton Buddies Web ApplicationRubyFeed: RubyFeed is a stand-alone HTML5 page for Internet Explorer on Windows 8 and above that makes it easy to view and manage your Windows RSS Platform feeds.

  Read the article

• RedirectToAction help: or better suggestion

  - by Dean Lunz

  Still getting my feet wet with asp.net mvc. I have a working Action and httppost action but I want to replace the "iffy" code with a RedirectToAction call because the code is rather large for what it does. A call using RedirectToAction would clean it up more. Every way I've tried it fails to work for me in that the drop down list fails to have the proper item selected. The code below works fine but calling RedirectToAction the was I have been does not work for me. So how can i rework the code below to use RedirectToAction ? I find this line of code particularly troubling because there is no garentee that the "this.Url.RequestContext.RouteData.Route" property will be of type "System.Web.Routing.Route". // get url request var urlValue = "/" + ((System.Web.Routing.Route)(this.Url.RequestContext.RouteData.Route)).Url; I also find the second piece of code rather bloated ... // build the url template urlValue = urlValue.Replace("{realm}", realm); urlValue = urlValue.Replace("{guild}", guild); urlValue = urlValue.Replace("{date}", date.ToShortDateString().Replace("/", "-")); urlValue = urlValue.Replace("{pageIndex}", pageIndex.ToString()); urlValue = urlValue.Replace("{itemCount}", itemCountToDisplay.ToString()); The route I have setup is routes.MapRoute( "GuildOverview Realm", // Route name "GuildMembers/{realm}/{guild}/{date}/{pageIndex}/{itemCount}", // URL with parameters new { controller = "GuildMembers", action = "Index" }); // Parameter defaults The code for my controller actions is below ... [HttpPost] public ActionResult Index(string realm, string guild, DateTime date, int pageIndex, int itemCount, FormCollection formCollection) { // get form data if it's there and try parse num items to display var cnt = this.Request.Form["ddlDisplayCount"]; int itemCountToDisplay = 10; if (!string.IsNullOrEmpty(cnt)) int.TryParse(cnt, out itemCountToDisplay); // get url request var urlValue = "/" + ((System.Web.Routing.Route)(this.Url.RequestContext.RouteData.Route)).Url; // build the url template urlValue = urlValue.Replace("{realm}", realm); urlValue = urlValue.Replace("{guild}", guild); urlValue = urlValue.Replace("{date}", date.ToShortDateString().Replace("/", "-")); urlValue = urlValue.Replace("{pageIndex}", pageIndex.ToString()); urlValue = urlValue.Replace("{itemCount}", itemCountToDisplay.ToString()); return this.Redirect(urlValue); } public ActionResult Index(string realm, string guild, DateTime date, int pageIndex, int itemCount) { // get the page index ViewData["pageIndex"] = pageIndex; // validate item count var pageItemCountItems = new[] { 10, 20, 50, 100 }; if (!pageItemCountItems.Contains(itemCount)) itemCount = pageItemCountItems[0]; // calc the number of pages there are var numPages = (this._repository.GetGuildMemberCount(date, realm, guild) / itemCount) + 1; this.ViewData["pageCount"] = numPages; // get url request var urlValue = "/" + ((System.Web.Routing.Route)(this.Url.RequestContext.RouteData.Route)).Url; // build the url template urlValue = urlValue.Replace("{realm}", realm); urlValue = urlValue.Replace("{guild}", guild); urlValue = urlValue.Replace("{date}", date.ToShortDateString().Replace("/", "-")); urlValue = urlValue.Replace("{pageIndex}", "{0}"); urlValue = urlValue.Replace("{itemCount}", itemCount.ToString()); // set url template ViewData["UrlTemplate"] = urlValue; // set list of items for the display count dropdown var itemCounts = new SelectList(pageItemCountItems, itemCount); ViewData["DisplayCount"] = itemCounts; return View(_repository.GetGuildCharacters(date, realm, guild, (pageIndex - 1) * itemCount, itemCount)); } and my Index view contains the fallowing <%=Html.SimplePager(int.Parse(ViewData["pageIndex"].ToString()), int.Parse(ViewData["pageCount"].ToString()), ViewData["urlTemplate"].ToString(), "nav-menu")%> <% using (Html.BeginForm()) { %> <%= Html.DropDownList("ddlDisplayCount", (SelectList)ViewData["DisplayCount"], new { onchange = "this.form.submit();" })%> <% }%>

  Read the article

• ViewModel with SelectList binding in ASP.NET MVC2

  - by Junto

  I am trying to implement an Edit ViewModel for my Linq2SQL entity called Product. It has a foreign key linked to a list of brands. Currently I am populating the brand list via ViewData and using DropDownListFor, thus: <div class="editor-field"> <%= Html.DropDownListFor(model => model.BrandId, (SelectList)ViewData["Brands"])%> <%= Html.ValidationMessageFor(model => model.BrandId) %> </div> Now I want to refactor the view to use a strongly typed ViewModel and Html.EditorForModel(): <% using (Html.BeginForm()) {%> <%= Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <%=Html.EditorForModel() %> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } %> In my Edit ViewModel, I have the following: public class EditProductViewModel { [HiddenInput] public int ProductId { get; set; } [Required()] [StringLength(200)] public string Name { get; set; } [Required()] [DataType(DataType.Html)] public string Description { get; set; } public IEnumerable<SelectListItem> Brands { get; set; } public int BrandId { get; set; } public EditProductViewModel(Product product, IEnumerable<SelectListItem> brands) { this.ProductId = product.ProductId; this.Name = product.Name; this.Description = product.Description; this.Brands = brands; this.BrandId = product.BrandId; } } The controller is setup like so: public ActionResult Edit(int id) { BrandRepository br = new BrandRepository(); Product p = _ProductRepository.Get(id); IEnumerable<SelectListItem> brands = br.GetAll().ToList().ToSelectListItems(p.BrandId); EditProductViewModel model = new EditProductViewModel(p, brands); return View("Edit", model); } The ProductId, Name and Description display correctly in the generated view, but the select list does not. The brand list definitely contains data. If I do the following in my view, the SelectList is visible: <% using (Html.BeginForm()) {%> <%= Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <%=Html.EditorForModel() %> <div class="editor-label"> <%= Html.LabelFor(model => model.BrandId) %> </div> <div class="editor-field"> <%= Html.DropDownListFor(model => model.BrandId, Model.Brands)%> <%= Html.ValidationMessageFor(model => model.BrandId) %> </div> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } %> What am I doing wrong? Does EditorForModel() not generically support the SelectList? Am I missing some kind of DataAnnotation? I can't seem to find any examples of SelectList usage in ViewModels that help. I'm truly stumped. This answer seems to be close, but hasn't helped.

  Read the article

• fluent nhibernate one to many mapping

  - by Sammy

  I am trying to figure out what I thought was just a simple one to many mapping using fluent Nhibernate. I hoping someone can point me to the right directory to achieve this one to many relations I have an articles table and a categories table Many Articles can only belong to one Category Now my Categores table has 4 Categories and Articles has one article associated with cateory1 here is my setup. using FluentNHibernate.Mapping; using System.Collections; using System.Collections.Generic; namespace FluentMapping { public class Article { public virtual int Id { get; private set; } public virtual string Title { get; set; } public virtual Category Category{get;set;} } public class Category { public virtual int Id { get; private set; } public virtual string Description { get; set; } public virtual IList<Article> Articles { get; set; } public Category() { Articles=new List<Article>(); } public virtual void AddArticle(Article article) { article.Category = this; Articles.Add(article); } public virtual void RemoveArticle(Article article) { Articles.Remove(article); } } public class ArticleMap:ClassMap<Article> { public ArticleMap() { Table("Articles"); Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Title); References(x => x.Category).Column("CategoryId").LazyLoad(); } public class CategoryMap:ClassMap<Category> { public CategoryMap() { Table("Categories"); Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Description); HasMany(x => x.Articles).KeyColumn("CategoryId").Fetch.Join(); } } } } if I run this test [Fact] public void Can_Get_Categories() { using (var session = SessionManager.Instance.Current) { using (var transaction = session.BeginTransaction()) { var categories = session.CreateCriteria(typeof(Category)) //.CreateCriteria("Articles").Add(NHibernate.Criterion.Restrictions.EqProperty("Category", "Id")) .AddOrder(Order.Asc("Description")) .List<Category>(); } } } I am getting 7 Categories due to Left outer join used by Nhibernate any idea what I am doing wrong in here? Thanks [Solution] After a couple of hours reading nhibernate docs I here is what I came up with var criteria = session.CreateCriteria(typeof (Category)); criteria.AddOrder(Order.Asc("Description")); criteria.SetResultTransformer(new DistinctRootEntityResultTransformer()); var cats1 = criteria.List<Category>(); Using Nhibernate linq provider var linq = session.Linq<Category>(); linq.QueryOptions.RegisterCustomAction(c => c.SetResultTransformer(new DistinctRootEntityResultTransformer())); var cats2 = linq.ToList();

  Read the article

• How to intercept raw soap request/response (data) from WCF client

  - by JohnIdol

  This question seems to be pretty close to what I am looking for - I was able to setup tracing and I am looking at the log entries for my calls to the service. However I need to see the raw soap request with the data I am sending to the service and I see no way of doing that from the SvcTraceViewer (only log entries are shown but no data sent to the service) - am I just missing configuration? Here's what I got in my web.config: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Verbose" propagateActivity="true"> <listeners> <add name="sdt" type="System.Diagnostics.XmlWriterTraceListener" initializeData="App_Data/Logs/WCFTrace.svclog" /> </listeners> </source> </sources> </system.diagnostics> Any help appreciated! UPDATE: this is all I see in my trace: <E2ETraceEvent xmlns="http://schemas.microsoft.com/2004/06/E2ETraceEvent"> <System xmlns="http://schemas.microsoft.com/2004/06/windows/eventlog/system"> <EventID>262163</EventID> <Type>3</Type> <SubType Name="Information">0</SubType> <Level>8</Level> <TimeCreated SystemTime="2010-05-10T13:10:46.6713553Z" /> <Source Name="System.ServiceModel" /> <Correlation ActivityID="{00000000-0000-0000-1501-0080000000f6}" /> <Execution ProcessName="w3wp" ProcessID="3492" ThreadID="23" /> <Channel /> <Computer>MY_COMPUTER_NAME</Computer> </System> <ApplicationData> <TraceData> <DataItem> <TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Information"> <TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Channels.MessageSent.aspx</TraceIdentifier> <Description>Sent a message over a channel.</Description> <AppDomain>MY_DOMAIN</AppDomain> <Source>System.ServiceModel.Channels.HttpOutput+WebRequestHttpOutput/50416815</Source> <ExtendedData xmlns="http://schemas.microsoft.com/2006/08/ServiceModel/MessageTraceRecord"> <MessageProperties> <Encoder>text/xml; charset=utf-8</Encoder> <AllowOutputBatching>False</AllowOutputBatching> <Via>http://xxx.xx.xxx.xxx:9080/MyWebService/myService</Via> </MessageProperties> <MessageHeaders></MessageHeaders> </ExtendedData> </TraceRecord> </DataItem> </TraceData> </ApplicationData>

  Read the article

• System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse request failed with HTTP status 40

  - by John Galt

  I am trying to make some enhancements to a production web app. After quite a bit of unit testing on my WinXP IIS 5.1 development machine, everything works on my localhost so I used the Visual Studio 2008 PUBLISH dialog on my Dev PC to push the following projects to a staging server: the primary web app the "primary" webservice (the home page tries to invoke this WS) a "secondary" webservice (not yet a problem because home page does not invoke this WS) I get the following when I try to browse to the home page of the web app typing this into my browser: link text Server Error in '/zVersion2' Application. The request failed with HTTP status 404: Not Found. Description: An unhandled exception occurred during the execution of the current web request.Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.WebException: The request failed with HTTP status 404: Not Found. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [WebException: The request failed with HTTP status 404: Not Found.] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +431289 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204 ProxyZipeeeService.WSZipeee.Zipeee.GetMessageByType(Int32 iMsgType) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\ProxyZipeeeService\ProxyZipeeeService\Web References\WSZipeee\Reference.vb:2168 Zipeee.frmZipeee.LoadMessage() in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:43 Zipeee.frmZipeee.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082 Here is a bit of the corresponding source code: Public wsZipeee As New ProxyZipeeeService.WSZipeee.Zipeee Dim dsStandardMsg As DataSet Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then LoadMessage() End If End Sub Private Sub LoadMessage() Dim iCnt As Integer Dim iValue As Integer dsStandardMsg = wsZipeee.GetMessageByType(BizConstants.MsgType.Standard) End Sub I suspect I may have configured things incorrectly on the staging server. The staging server is Win Server 2003 ServicePack 2 running IIS 6.0. When I published the primary site and the 2 webservices on the staging server called MOJITO I created the physical directories for each on the D drive. Then using INETMGR, I configured the following virtual directories: zVersion2 zVersion2wsSQL zVersion2wsEmergency All of the above are configured to use a new application pool I setup and named zVersion2aspNet20. The default web site for this machine MOJITO is configured to use ASP.NET 1.1 and the IP address is set to (All Unassigned). The production versions of the latter 2 webservices run on the MOJITO machine (named ZipeeeService and EmergencyService respectively). Can my staging versions of the above webservices (named zVersion2wsSQL and zVersion2wsEmergency respectively) co-exist on the same web server with the same IP address? Please note that when I test the zVersion2wsSQL webservice independently (from INETMGR right-mouse and click Browse) it works as expected (i.e. presenting all the methods of the webservice) like this snippet: GetMessageByType MessageName="Get_x0020_Message_x0020_By_x0020_Type" I can test this webmethod by clicking on it and it presents the Test dialog (because it takes a simple datatype and I am invoking it on localhost (i.e. MOJITO): **Get Message By Type** **Test** To test the operation using the HTTP POST protocol, click the 'Invoke' button. Parameter Value iMsgType: _______ [INVOKE button] SOAP 1.1 ....etc. I fear I may have rambled with too much information so I will stop but I hope someone can help me as I cannot understand why this request results in a "not found". Thanks.

  Read the article

• Build problems when adding `__str__` method to Boost Python C++ class

  - by Rickard

  I have started to play around with boost python a bit and ran into a problem. I tried to expose a C++ class to python which posed no problems. But I can't seem to manage to implement the __str__ functionality for the class without getting build errors I don't understand. I'm using boost 1_42 prebuild by boostpro. I build the library using cmake and the vs2010 compiler. I have a very simple setup. The header-file (tutorial.h) looks like the following: #include <iostream> namespace TestBoostPython{ class TestClass { private: double m_x; public: TestClass(double x); double Get_x() const; void Set_x(double x); }; std::ostream &operator<<(std::ostream &ostr, const TestClass &ts); }; and the corresponding cpp-file looks like: #include <boost/python.hpp> #include "tutorial.h" using namespace TestBoostPython; TestClass::TestClass(double x) { m_x = x; } double TestClass::Get_x() const { return m_x; } void TestClass::Set_x(double x) { m_x = x; } std::ostream &operator<<(std::ostream &ostr, TestClass &ts) { ostr << ts.Get_x() << "\n"; return ostr; } BOOST_PYTHON_MODULE(testme) { using namespace boost::python; class_<TestClass>("TestClass", init<double>()) .add_property("x", &TestClass::Get_x, &TestClass::Set_x) .def(str(self)) ; } The CMakeLists.txt looks like the following: CMAKE_MINIMUM_REQUIRED(VERSION 2.8) project (testme) FIND_PACKAGE( Boost REQUIRED ) FIND_PACKAGE( Boost COMPONENTS python REQUIRED ) FIND_PACKAGE( PythonLibs REQUIRED ) set(Boost_USE_STATIC_LIBS OFF) set(Boost_USE_MULTITHREAD ON) INCLUDE_DIRECTORIES(${Boost_INCLUDE_DIRS}) INCLUDE_DIRECTORIES ( ${PYTHON_INCLUDE_PATH} ) add_library(testme SHARED tutorial.cpp) target_link_libraries(testme ${Boost_PYTHON_LIBRARY}) target_link_libraries(testme ${PYTHON_LIBRARY} The build error I get is the following: Compiling... tutorial.cpp C:\Program Files (x86)\boost\boost_1_42\boost/python/def_visitor.hpp(31) : error C2780: 'void boost::python::api::object_operators::visit(ClassT &,const char *,const boost::python::detail::def_helper &) const' : expects 3 arguments - 1 provided with [ U=boost::python::api::object ] C:\Program Files (x86)\boost\boost_1_42\boost/python/object_core.hpp(203) : see declaration of 'boost::python::api::object_operators::visit' with [ U=boost::python::api::object ] C:\Program Files (x86)\boost\boost_1_42\boost/python/def_visitor.hpp(67) : see reference to function template instantiation 'void boost::python::def_visitor_access::visit,classT>(const V &,classT &)' being compiled with [ DerivedVisitor=boost::python::api::object, classT=boost::python::class_, V=boost::python::def_visitor ] C:\Program Files (x86)\boost\boost_1_42\boost/python/class.hpp(225) : see reference to function template instantiation 'void boost::python::def_visitor::visit>(classT &) const' being compiled with [ DerivedVisitor=boost::python::api::object, W=TestBoostPython::TestClass, classT=boost::python::class_ ] .\tutorial.cpp(29) : see reference to function template instantiation 'boost::python::class_ &boost::python::class_::def(const boost::python::def_visitor &)' being compiled with [ W=TestBoostPython::TestClass, U=boost::python::api::object, DerivedVisitor=boost::python::api::object ] Does anyone have any idea on what went wrrong? If I remove the .def(str(self)) part from the wrapper code, everything compiles fine and the class is usable from python. I'd be very greatful for assistance. Thank you, Rickard

  Read the article

• MSChart on ASP.NET MVC 2

  - by Adron

  I upgraded my MVC Application using MSChart to MVC 2 and have ended up with broken image links for the charts. See my blog entry here: http://blog.adronbhall.com/post/2010/04/12/MVC-2-Breaks-my-Charts.aspx I get no build errors anymore, and have completed the following steps. First, I setup the following web.config lines. add tagPrefix="asp" namespace="System.Web.UI.DataVisualization.Charting" assembly="System.Web.DataVisualization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" and add path="ChartImg.axd" verb="GET,HEAD" type="System.Web.UI.DataVisualization.Charting.ChartHttpHandler, System.Web.DataVisualization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" validate="false" (NOTE: I took the chevrons off so the lines would appear) The next thing I did was create this page with the following code. Which should, according to it working in MVC<1, showed 4 charts. <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <%@ Import Namespace="Scorecard.Views" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Scorecard </asp:Content> <asp:Content ID="applicationTitle" ContentPlaceHolderID="ContentPlaceHolderApplicationName" runat="server"> <%=Html.Encode(ViewData["ApplicationTitle"])%> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <form id="form1" runat="server"> <h2> Web Analysis Scorecard </h2> <table> <tr> <td> <% ChartHelper chartHelper = new ChartHelper("Top Countries", (double[])ViewData["TopCountryCounts"], (string[])ViewData["TopCountries"], SeriesChartType.Pie); Chart chartPieTwo = chartHelper.ResultingChart; // Explode data point with label "USA" chartPieTwo.Series["DefaultSeries"].Points[3]["Exploded"] = "true"; chartHelper.RenderChart(this); %> </td> <td> <% chartHelper = new ChartHelper("View Cart Trend", (double[])ViewData["LineValues"], (string[])ViewData["TopEngines"], SeriesChartType.Line); chartHelper.RenderChart(this); %> </td> </tr> <tr> <td> <% chartHelper = new ChartHelper("Yesterday's Page Views", (double[])ViewData["ColumnStats"], (string[])ViewData["ColumnStatHeaders"], SeriesChartType.Column); chartHelper.RenderChart(this); %> </td> <td> <% double[] theValues = (double[])ViewData["ColumnStats"]; double[] newValues = new double[] { 0, 0, 0, 0 }; int count = 0; int daysInMonth = DateTime.DaysInMonth(DateTime.Now.Year, DateTime.Now.Month); foreach (double d in theValues) { newValues[count] += d * daysInMonth; count++; } chartHelper = new ChartHelper("Current Month Page Views", newValues, (string[])ViewData["ColumnStatHeaders"], SeriesChartType.Bar); chartHelper.RenderChart(this); %> </td> </tr> </table> </form>

  Read the article

• .NET SerialPort DataReceived event not firing

  - by Klay

  I have a WPF test app for evaluating event-based serial port communication (vs. polling the serial port). The problem is that the DataReceived event doesn't seem to be firing at all. I have a very basic WPF form with a TextBox for user input, a TextBlock for output, and a button to write the input to the serial port. Here's the code: public partial class Window1 : Window { SerialPort port; public Window1() { InitializeComponent(); port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); } void port_DataReceived(object sender, SerialDataReceivedEventArgs e) { Debug.Print("receiving!"); string data = port.ReadExisting(); Debug.Print(data); outputText.Text = data; } private void Button_Click(object sender, RoutedEventArgs e) { Debug.Print("sending: " + inputText.Text); port.WriteLine(inputText.Text); } } Now, here are the complicating factors: The laptop I'm working on has no serial ports, so I'm using a piece of software called Virtual Serial Port Emulator to setup a COM2. VSPE has worked admirably in the past, and it's not clear why it would only malfunction with .NET's SerialPort class, but I mention it just in case. When I hit the button on my form to send the data, my Hyperterminal window (connected on COM2) shows that the data is getting through. Yes, I disconnect Hyperterminal when I want to test my form's ability to read the port. I've tried opening the port before wiring up the event. No change. I've read through another post here where someone else is having a similar problem. None of that info has helped me in this case. EDIT: Here's the console version (modified from http://mark.michaelis.net/Blog/TheBasicsOfSystemIOPortsSerialPort.aspx): class Program { static SerialPort port; static void Main(string[] args) { port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); string text; do { text = Console.ReadLine(); port.Write(text + "\r\n"); } while (text.ToLower() != "q"); } public static void port_DataReceived(object sender, SerialDataReceivedEventArgs args) { string text = port.ReadExisting(); Console.WriteLine("received: " + text); } } This should eliminate any concern that it's a Threading issue (I think). This doesn't work either. Again, Hyperterminal reports the data sent through the port, but the console app doesn't seem to fire the DataReceived event. EDIT #2: I realized that I had two separate apps that should both send and receive from the serial port, so I decided to try running them simultaneously... If I type into the console app, the WPF app DataReceived event fires, with the expected threading error (which I know how to deal with). If I type into the WPF app, the console app DataReceived event fires, and it echoes the data. I'm guessing the issue is somewhere in my use of the VSPE software, which is set up to treat one serial port as both input and output. And through some weirdness of the SerialPort class, one instance of a serial port can't be both the sender and receiver. Anyway, I think it's solved.

  Read the article

• How to decrypt a string in C# that was encrypted in Delphi

  - by Simon Linder

  Hi all, we have a project written in Delphi that we want to convert to C#. Problem is that we have some passwords and settings that are encrypted and written into the registry. When we need a specified password we get it from the registry and decrypt it so we can use it. For the conversion into C# we have to do it the same way so that the application can also be used by users that have the old version and want to upgrade it. Here is the code we use to encrypt/decrypt strings in Delphi: unit uCrypt; interface function EncryptString(strPlaintext, strPassword : String) : String; function DecryptString(strEncryptedText, strPassword : String) : String; implementation uses DCPcrypt2, DCPblockciphers, DCPdes, DCPmd5; const CRYPT_KEY = '1q2w3e4r5t6z7u8'; function EncryptString(strPlaintext) : String; var cipher : TDCP_3des; strEncryptedText : String; begin if strPlaintext <> '' then begin try cipher := TDCP_3des.Create(nil); try cipher.InitStr(CRYPT_KEY, TDCP_md5); strEncryptedText := cipher.EncryptString(strPlaintext); finally cipher.Free; end; except strEncryptedText := ''; end; end; Result := strEncryptedText; end; function DecryptString(strEncryptedText) : String; var cipher : TDCP_3des; strDecryptedText : String; begin if strEncryptedText <> '' then begin try cipher := TDCP_3des.Create(nil); try cipher.InitStr(CRYPT_KEY, TDCP_md5); strDecryptedText := cipher.DecryptString(strEncryptedText); finally cipher.Free; end; except strDecryptedText := ''; end; end; Result := strDecryptedText; end; end. So for example when we want to encrypt the string asdf1234 we get the result WcOb/iKo4g8=. We now want to decrypt that string in C#. Here is what we tried to do: public static void Main(string[] args) { string Encrypted = "WcOb/iKo4g8="; string Password = "1q2w3e4r5t6z7u8"; string DecryptedString = DecryptString(Encrypted, Password); } public static string DecryptString(string Message, string Passphrase) { byte[] Results; System.Text.UTF8Encoding UTF8 = new System.Text.UTF8Encoding(); // Step 1. We hash the passphrase using MD5 // We use the MD5 hash generator as the result is a 128 bit byte array // which is a valid length for the TripleDES encoder we use below MD5CryptoServiceProvider HashProvider = new MD5CryptoServiceProvider(); byte[] TDESKey = HashProvider.ComputeHash(UTF8.GetBytes(Passphrase)); // Step 2. Create a new TripleDESCryptoServiceProvider object TripleDESCryptoServiceProvider TDESAlgorithm = new TripleDESCryptoServiceProvider(); // Step 3. Setup the decoder TDESAlgorithm.Key = TDESKey; TDESAlgorithm.Mode = CipherMode.ECB; TDESAlgorithm.Padding = PaddingMode.None; // Step 4. Convert the input string to a byte[] byte[] DataToDecrypt = Convert.FromBase64String(Message); // Step 5. Attempt to decrypt the string try { ICryptoTransform Decryptor = TDESAlgorithm.CreateDecryptor(); Results = Decryptor.TransformFinalBlock(DataToDecrypt, 0, DataToDecrypt.Length); } finally { // Clear the TripleDes and Hashprovider services of any sensitive information TDESAlgorithm.Clear(); HashProvider.Clear(); } // Step 6. Return the decrypted string in UTF8 format return UTF8.GetString(Results); } Well the result differs from the expected result. After we call DecryptString() we expect to get asdf1234but we get something else. Does anyone have an idea of how to decrypt that correctly? Thanks in advance Simon

  Read the article

• Implementing Unit Testing on the iPhone

  - by james.ingham

  Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged).

  Read the article

• Class initialization issues loading java.util.LogManager in Android Dalvik VM

  - by Freddy B. Rose

  I've done changes in an Android native library and installed a new system.img file but am now getting an unrelated Error on startup. I can get past it by swallowing the error but I wanted to know if anyone can explain what the issue is. The Android implementation of Logger.java claims that it is Forcing the LogManager to be initialized since its class init code performs necessary one-time setup. But this forced initialization results in a NoClassDefFoundError. I'm thinking that it has something to do with the class not having been preloaded by Zygote yet but am not that familiar with the whole class loaders and VM business. If anyone has some insight it would be greatly appreciated. Thanks. I/Zygote ( 1253): Preloading classes... D/skia ( 1253): ------ build_power_table 1.4 D/skia ( 1253): ------ build_power_table 0.714286 W/dalvikvm( 1253): Exception Ljava/lang/StackOverflowError; thrown during Ljava/util/logging/LogManager;. W/dalvikvm( 1253): Exception Ljava/lang/NoClassDefFoundError; thrown during Ljava/security/Security;. W/dalvikvm( 1253): Exception Ljava/lang/ExceptionInInitializerError; thrown during Landroid/net/http/HttpsConnection;. E/Zygote ( 1253): Error preloading android.net.http.HttpsConnection. E/Zygote ( 1253): java.lang.ExceptionInInitializerError E/Zygote ( 1253): at java.lang.Class.classForName(Native Method) E/Zygote ( 1253): at java.lang.Class.forName(Class.java:237) E/Zygote ( 1253): at java.lang.Class.forName(Class.java:183) E/Zygote ( 1253): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:295) E/Zygote ( 1253): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:590) E/Zygote ( 1253): at dalvik.system.NativeStart.main(Native Method) E/Zygote ( 1253): Caused by: java.lang.ExceptionInInitializerError E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory$1.run(KeyManagerFactory.java:57) E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory$1.run(KeyManagerFactory.java:56) E/Zygote ( 1253): at java.security.AccessController.doPrivilegedImpl(AccessController.java:264) E/Zygote ( 1253): at java.security.AccessController.doPrivileged(AccessController.java:84) E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory.getDefaultAlgorithm(KeyManagerFactory.java:55) E/Zygote ( 1253): at org.apache.harmony.xnet.provider.jsse.SSLParameters.(SSLParameters.java:142) E/Zygote ( 1253): at org.apache.harmony.xnet.provider.jsse.SSLContextImpl.engineInit(SSLContextImpl.java:82) E/Zygote ( 1253): at android.net.http.HttpsConnection.initializeEngine(HttpsConnection.java:101) E/Zygote ( 1253): at android.net.http.HttpsConnection.(HttpsConnection.java:65) E/Zygote ( 1253): ... 6 more E/Zygote ( 1253): Caused by: java.lang.NoClassDefFoundError: java.util.logging.LogManager E/Zygote ( 1253): at java.util.logging.Logger.initHandler(Logger.java:419) E/Zygote ( 1253): at java.util.logging.Logger.log(Logger.java:1094) E/Zygote ( 1253): at java.util.logging.Logger.warning(Logger.java:906) E/Zygote ( 1253): at org.apache.harmony.luni.util.MsgHelp.loadBundle(MsgHelp.java:61) E/Zygote ( 1253): at org.apache.harmony.luni.util.Msg.getString(Msg.java:60) E/Zygote ( 1253): at java.io.BufferedInputStream.read(BufferedInputStream.java:316) E/Zygote ( 1253): at java.io.FilterInputStream.read(FilterInputStream.java:138) E/Zygote ( 1253): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:157) E/Zygote ( 1253): at java.io.BufferedInputStream.read(BufferedInputStream.java:243) E/Zygote ( 1253): at java.util.Properties.load(Properties.java:302) E/Zygote ( 1253): at java.security.Security$1.run(Security.java:80) E/Zygote ( 1253): at java.security.Security$1.run(Security.java:67) E/Zygote ( 1253): at java.security.AccessController.doPrivilegedImpl(AccessController.java:264) E/Zygote ( 1253): at java.security.AccessController.doPrivileged(AccessController.java:84) E/Zygote ( 1253): at java.security.Security.(Security.java:66) E/Zygote ( 1253): ... 15 more W/dalvikvm( 1253): threadid=3: thread exiting with uncaught exception (group=0x2aac6170)

  Read the article

• Need help with setting up comet code

  - by Saif Bechan

  Does anyone know off a way or maybe think its possible to connect Node.js with Nginx http push module to maintain a persistent connection between client and browser. I am new to comet so just don't understand the publishing etc maybe someone can help me with this. What i have set up so far is the following. I downloaded the jQuery.comet plugin and set up the following basic code: Client JavaScript <script type="text/javascript"> function updateFeed(data) { $('#time').text(data); } function catchAll(data, type) { console.log(data); console.log(type); } $.comet.connect('/broadcast/sub?channel=getIt'); $.comet.bind(updateFeed, 'feed'); $.comet.bind(catchAll); $('#kill-button').click(function() { $.comet.unbind(updateFeed, 'feed'); }); </script> What I can understand from this is that the client will keep on listening to the url followed by /broadcast/sub=getIt. When there is a message it will fire updateFeed. Pretty basic and understandable IMO. Nginx http push module config default_type application/octet-stream; sendfile on; keepalive_timeout 65; push_authorized_channels_only off; server { listen 80; location /broadcast { location = /broadcast/sub { set $push_channel_id $arg_channel; push_subscriber; push_subscriber_concurrency broadcast; push_channel_group broadcast; } location = /broadcast/pub { set $push_channel_id $arg_channel; push_publisher; push_min_message_buffer_length 5; push_max_message_buffer_length 20; push_message_timeout 5s; push_channel_group broadcast; } } } Ok now this tells nginx to listen at port 80 for any calls to /broadcast/sub and it will give back any responses sent to /broadcast/pub. Pretty basic also. This part is not so hard to understand, and is well documented over the internet. Most of the time there is a ruby or a php file behind this that does the broadcasting. My idea is to have node.js broadcasting /broadcast/pub. I think this will let me have persistent streaming data from the server to the client without breaking the connection. I tried the long-polling approach with looping the request but I think this will be more efficient. Or is this not going to work. Node.js file Now to create the Node.js i'm lost. First off all I don't know how to have node.js to work in this way. The setup I used for long polling is as follows: var sys = require('sys'), http = require('http'); http.createServer(function (req, res) { res.writeHead(200, {'Content-Type': 'text/html'}); res.write(new Date()); res.close(); seTimeout('',1000); }).listen(8000); This listens to port 8000 and just writes on the response variable. For long polling my nginx.config looked something like this: server { listen 80; server_name _; location / { proxy_pass http://mydomain.com:8080$request_uri; include /etc/nginx/proxy.conf; } } This just redirected the port 80 to 8000 and this worked fine. Does anyone have an idea on how to have Node.js act in a way Comet understands it. Would be really nice and you will help me out a lot. Recources used An example where this is done with ruby instead of Node.js jQuery.comet Nginx HTTP push module homepage Faye: a Comet client and server for Node.js and Rack To use faye I have to install the comet client, but I want to use the one supplied with Nginx. Thats why I don't just use faye. The one nginx uses is much more optimzed. extra Persistant connections Going evented with Node.js

  Read the article

• Class initialization issues loading java.util.logging.LogManager in Android Dalvik VM

  - by Freddy B. Rose

  I've done changes in an Android native library and installed a new system.img file but am now getting an unrelated Error on startup. I can get past it by swallowing the error but I wanted to know if anyone can explain what the issue is. The Android implementation of Logger.java claims that it is Forcing the LogManager to be initialized since its class init code performs necessary one-time setup. But this forced initialization results in a NoClassDefFoundError. I'm thinking that it has something to do with the class not having been preloaded by Zygote yet but am not that familiar with the whole class loaders and VM business. If anyone has some insight it would be greatly appreciated. Thanks. I/Zygote ( 1253): Preloading classes... D/skia ( 1253): ------ build_power_table 1.4 D/skia ( 1253): ------ build_power_table 0.714286 W/dalvikvm( 1253): Exception Ljava/lang/StackOverflowError; thrown during Ljava/util/logging/LogManager;. W/dalvikvm( 1253): Exception Ljava/lang/NoClassDefFoundError; thrown during Ljava/security/Security;. W/dalvikvm( 1253): Exception Ljava/lang/ExceptionInInitializerError; thrown during Landroid/net/http/HttpsConnection;. E/Zygote ( 1253): Error preloading android.net.http.HttpsConnection. E/Zygote ( 1253): java.lang.ExceptionInInitializerError E/Zygote ( 1253): at java.lang.Class.classForName(Native Method) E/Zygote ( 1253): at java.lang.Class.forName(Class.java:237) E/Zygote ( 1253): at java.lang.Class.forName(Class.java:183) E/Zygote ( 1253): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:295) E/Zygote ( 1253): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:590) E/Zygote ( 1253): at dalvik.system.NativeStart.main(Native Method) E/Zygote ( 1253): Caused by: java.lang.ExceptionInInitializerError E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory$1.run(KeyManagerFactory.java:57) E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory$1.run(KeyManagerFactory.java:56) E/Zygote ( 1253): at java.security.AccessController.doPrivilegedImpl(AccessController.java:264) E/Zygote ( 1253): at java.security.AccessController.doPrivileged(AccessController.java:84) E/Zygote ( 1253): at javax.net.ssl.KeyManagerFactory.getDefaultAlgorithm(KeyManagerFactory.java:55) E/Zygote ( 1253): at org.apache.harmony.xnet.provider.jsse.SSLParameters.(SSLParameters.java:142) E/Zygote ( 1253): at org.apache.harmony.xnet.provider.jsse.SSLContextImpl.engineInit(SSLContextImpl.java:82) E/Zygote ( 1253): at android.net.http.HttpsConnection.initializeEngine(HttpsConnection.java:101) E/Zygote ( 1253): at android.net.http.HttpsConnection.(HttpsConnection.java:65) E/Zygote ( 1253): ... 6 more E/Zygote ( 1253): Caused by: java.lang.NoClassDefFoundError: java.util.logging.LogManager E/Zygote ( 1253): at java.util.logging.Logger.initHandler(Logger.java:419) E/Zygote ( 1253): at java.util.logging.Logger.log(Logger.java:1094) E/Zygote ( 1253): at java.util.logging.Logger.warning(Logger.java:906) E/Zygote ( 1253): at org.apache.harmony.luni.util.MsgHelp.loadBundle(MsgHelp.java:61) E/Zygote ( 1253): at org.apache.harmony.luni.util.Msg.getString(Msg.java:60) E/Zygote ( 1253): at java.io.BufferedInputStream.read(BufferedInputStream.java:316) E/Zygote ( 1253): at java.io.FilterInputStream.read(FilterInputStream.java:138) E/Zygote ( 1253): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:157) E/Zygote ( 1253): at java.io.BufferedInputStream.read(BufferedInputStream.java:243) E/Zygote ( 1253): at java.util.Properties.load(Properties.java:302) E/Zygote ( 1253): at java.security.Security$1.run(Security.java:80) E/Zygote ( 1253): at java.security.Security$1.run(Security.java:67) E/Zygote ( 1253): at java.security.AccessController.doPrivilegedImpl(AccessController.java:264) E/Zygote ( 1253): at java.security.AccessController.doPrivileged(AccessController.java:84) E/Zygote ( 1253): at java.security.Security.(Security.java:66) E/Zygote ( 1253): ... 15 more W/dalvikvm( 1253): threadid=3: thread exiting with uncaught exception (group=0x2aac6170)

  Read the article

• Mercurial hg clone on Windows via ssh with copSSH issue

  - by Kyle Tolle

  I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

  Read the article

• Eclipse buildtime and runtime classpaths for easy execution of junit test cases

  - by emeraldjava

  Hey, I've a large eclipse project with multiple junit classes. I'm trying to strike a balance between adding runtime resources to the eclipse project classpath, and the need to configure mutliple junit launch configurations. I realise the default eclipse build classpath is inherited by all unit test configurations, but some of my tests require extra runtime resources. I could add these resources to the build classpath, but this does slow my overall project build time (since it has to keep more files in synch). I don't like the idea of including * resources and jars on the runtime classpath. The two options that i have are these, the positive and negative cases as i see it are listed 1 : Add all runtime resources to eclipse classpath. POS I can select a unit test and run it without having to configure the test classpath. POS Extra resources on build classpath means eclipse slows down. NEG More difficult to ensure each test uses the correct resources. 2 : Configure the classpath of each unit test POS I know exactly what resources are being used by a test. POS Smaller build classpath means quicker build and execution by eclipse. NEG Its a pain having to setup multiple separate junit runtime classpaths. Ideally i'd like to configure one base junit runtime configuration, which takes the default eclipse build classpath, adds extra runtime jars and resources. This configuration could then be reused by the specific junit test cases, Is anything like this possible? Looking at a specific junit launch configuration which can be exported to a share project file <?xml version="1.0" encoding="UTF-8" standalone="no"?> <launchConfiguration type="org.eclipse.jdt.junit.launchconfig"> <stringAttribute key="bad_container_name" value="/CR-3089_5_1_branch."/> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> <listEntry value="/CR-3089_5_1_branch/src/com/x/y/z/ParserJUnitTest.java"/> </listAttribute> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> <listEntry value="1"/> </listAttribute> <stringAttribute key="org.eclipse.jdt.junit.CONTAINER" value=""/> <booleanAttribute key="org.eclipse.jdt.junit.KEEPRUNNING_ATTR" value="false"/> <stringAttribute key="org.eclipse.jdt.junit.TESTNAME" value=""/> <stringAttribute key="org.eclipse.jdt.junit.TEST_KIND" value="org.eclipse.jdt.junit.loader.junit4"/> <stringAttribute key="org.eclipse.jdt.launching.MAIN_TYPE" value="com.x.y.z.ParserJUnitTest"/> <stringAttribute key="org.eclipse.jdt.launching.PROJECT_ATTR" value="CR-3089_5_1_branch"/> </launchConfiguration> is it possible to extend/reuse this configuration, and parameterise the 'org.eclipse.jdt.launching.MAIN_TYPE' value? I'm aware of the commons launch and jar manifest file solutions to configuring the classpath, but they both seem to assume that an ant build is run before the test can execute. I want to avoid any eclipse dependency on calling an ant target when refactoting code and executing tests. Basically - What is the the easiest way to seperate and maintain the eclipse buildtime classpath and junit runtime classpaths?

  Read the article

• adobe flash buider (flex4): Error #2025 or Error: addChild() is not available in this class. Instead

  - by user306584

  Hi, I'm a complete newbie to Flex, so apologies for my dumbness. I've searched for an answer but haven't found anything that seems to be doing the trick. What I'm trying to do: port this example http://www.adobe.com/devnet/air/flex/articles/flex_air_codebase_print.html to Flash Builder 4. All seems to be fine but for one thing. When I use the original code for the Air application <?xml version="1.0" encoding="utf-8"?> <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="onApplicationComplete()"> <fx:Script> <![CDATA[ private static const neededForCompilation:AirGeneralImplementation = null; private function onApplicationComplete():void { var can:MainCanvas = new MainCanvas(); this.addChild(can); can.labelMessage = "Loaded in an AIR Application "; } ]]> </fx:Script> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> </s:WindowedApplication> I get this run time error Error: addChild() is not available in this class. Instead, use addElement() or modify the skin, if you have one. at spark.components.supportClasses::SkinnableComponent/addChild()[E:\dev\4.0.0\frameworks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:1038] If I substitute the code with this.addElement(can); Everything loads well but the first time I try to press any of the buttons on the main canvas I get the following run time error ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller. at flash.display::DisplayObjectContainer/getChildIndex() at mx.managers::SystemManager/getChildIndex()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\SystemManager.as:1665] at mx.managers.systemClasses::ActiveWindowManager/mouseDownHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\systemClasses\ActiveWindowManager.as:437] here's the super simple code for the main canvas <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="init();"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <fx:Script source="main.as" /> <mx:Label id="lblMessage" text="The UI from the shared Flex app BothCode" x="433" y="112"/> <s:Button x="433" y="141" click="saveFile();" label="Save File"/> <s:Button x="601" y="141" click="GeneralFactory.getGeneralInstance().airOnlyFunctionality();" label="Air Only"/> </s:Application> Any help would be immensely appreciated. And any pointers to how to setup a project that can compile in both Air and Flash while sharing the same code, all for Flex 4, would also be immensely appreciated. thank you!

  Read the article

• CSG operations on implicit surfaces with marching cubes [SOLVED]

  - by Mads Elvheim

  I render isosurfaces with marching cubes, (or perhaps marching squares as this is 2D) and I want to do set operations like set difference, intersection and union. I thought this was easy to implement, by simply choosing between two vertex scalars from two different implicit surfaces, but it is not. For my initial testing, I tried with two spheres circles, and the set operation difference. i.e A - B. One circle is moving and the other one is stationary. Here's the approach I tried when picking vertex scalars and when classifying corner vertices as inside or outside. The code is written in C++. OpenGL is used for rendering, but that's not important. Normal rendering without any CSG operations does give the expected result. void march(const vec2& cmin, //min x and y for the grid cell const vec2& cmax, //max x and y for the grid cell std::vector<vec2>& tri, float iso, float (*cmp1)(const vec2&), //distance from stationary circle float (*cmp2)(const vec2&) //distance from moving circle ) { unsigned int squareindex = 0; float scalar[4]; vec2 verts[8]; /* initial setup of the grid cell */ verts[0] = vec2(cmax.x, cmax.y); verts[2] = vec2(cmin.x, cmax.y); verts[4] = vec2(cmin.x, cmin.y); verts[6] = vec2(cmax.x, cmin.y); float s1,s2; /********************************** ********For-loop of interest****** *******Set difference between **** *******two implicit surfaces****** **********************************/ for(int i=0,j=0; i<4; ++i, j+=2){ s1 = cmp1(verts[j]); s2 = cmp2(verts[j]); if((s1 < iso)){ //if inside circle1 if((s2 < iso)){ //if inside circle2 scalar[i] = s2; //then set the scalar to the moving circle } else { scalar[i] = s1; //only inside circle1 squareindex |= (1<<i); //mark as inside } } else { scalar[i] = s1; //inside neither circle } } if(squareindex == 0) return; /* Usual interpolation between edge points to compute the new intersection points */ verts[1] = mix(iso, verts[0], verts[2], scalar[0], scalar[1]); verts[3] = mix(iso, verts[2], verts[4], scalar[1], scalar[2]); verts[5] = mix(iso, verts[4], verts[6], scalar[2], scalar[3]); verts[7] = mix(iso, verts[6], verts[0], scalar[3], scalar[0]); for(int i=0; i<10; ++i){ //10 = maxmimum 3 triangles, + one end token int index = triTable[squareindex][i]; //look up our indices for triangulation if(index == -1) break; tri.push_back(verts[index]); } } This gives me weird jaggies: It looks like the CSG operation is done without interpolation. It just "discards" the whole triangle. Do I need to interpolate in some other way, or combine the vertex scalar values? I'd love some help with this. A full testcase can be downloaded HERE EDIT: Basically, my implementation of marching squares works fine. It is my scalar field which is broken, and I wonder what the correct way would look like. Preferably I'm looking for a general approach to implement the three set operations I discussed above, for the usual primitives (circle, rectangle/square, plane)

  Read the article

• Azure git deployment - missing references in 2nd assembly

  - by Dan

  I'm trying to setup Bitbucket deployment to an Azure website. I successfully have Bitbucket and Azure linked, but when I push to Bitbucket, I get the following error on the Azure site: If I click on 'View Log', it shows the following compile errors: D:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(1578,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] D:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(1578,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "WebMatrix.WebData, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] CustomMembershipProvider.cs(5,7): error CS0246: The type or namespace name 'WebMatrix' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] CustomMembershipProvider.cs(9,38): error CS0246: The type or namespace name 'ExtendedMembershipProvider' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Models\AccountModels.cs(3,18): error CS0234: The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] CustomMembershipProvider.cs(198,37): error CS0246: The type or namespace name 'OAuthAccountData' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Models\AccountModels.cs(40,10): error CS0246: The type or namespace name 'Compare' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Models\AccountModels.cs(40,10): error CS0246: The type or namespace name 'CompareAttribute' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Models\AccountModels.cs(73,10): error CS0246: The type or namespace name 'Compare' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Models\AccountModels.cs(73,10): error CS0246: The type or namespace name 'CompareAttribute' could not be found (are you missing a using directive or an assembly reference?) [C:\DWASFiles\Sites\<projname>\VirtualDirectory0\site\repository\<projname>.Common\<projname>.Common.csproj] Note that these compile errors are against another assembly in my project (the assembly where I put the business logic). When Googling, the only mention I found was about having to set the "local copy" flag to true for those references. I've tried this, but still got the same errors. This all compiles fine locally. Any ideas?

  Read the article

• How to write a test for accounts controller for forms authenticate

  - by Anil Ali

  Trying to figure out how to adequately test my accounts controller. I am having problem testing the successful logon scenario. Issue 1) Am I missing any other tests.(I am testing the model validation attributes separately) Issue 2) Put_ReturnsOverviewRedirectToRouteResultIfLogonSuccessAndNoReturnUrlGiven() and Put_ReturnsRedirectResultIfLogonSuccessAndReturnUrlGiven() test are not passing. I have narrowed it down to the line where i am calling _membership.validateuser(). Even though during my mock setup of the service i am stating that i want to return true whenever validateuser is called, the method call returns false. Here is what I have gotten so far AccountController.cs [HandleError] public class AccountController : Controller { private IMembershipService _membershipService; public AccountController() : this(null) { } public AccountController(IMembershipService membershipService) { _membershipService = membershipService ?? new AccountMembershipService(); } [HttpGet] public ActionResult LogOn() { return View(); } [HttpPost] public ActionResult LogOn(LogOnModel model, string returnUrl) { if (ModelState.IsValid) { if (_membershipService.ValidateUser(model.UserName,model.Password)) { if (!String.IsNullOrEmpty(returnUrl)) { return Redirect(returnUrl); } return RedirectToAction("Index", "Overview"); } ModelState.AddModelError("*", "The user name or password provided is incorrect."); } return View(model); } } AccountServices.cs public interface IMembershipService { bool ValidateUser(string userName, string password); } public class AccountMembershipService : IMembershipService { public bool ValidateUser(string userName, string password) { throw new System.NotImplementedException(); } } AccountControllerFacts.cs public class AccountControllerFacts { public static AccountController GetAccountControllerForLogonSuccess() { var membershipServiceStub = MockRepository.GenerateStub<IMembershipService>(); var controller = new AccountController(membershipServiceStub); membershipServiceStub .Stub(x => x.ValidateUser("someuser", "somepass")) .Return(true); return controller; } public static AccountController GetAccountControllerForLogonFailure() { var membershipServiceStub = MockRepository.GenerateStub<IMembershipService>(); var controller = new AccountController(membershipServiceStub); membershipServiceStub .Stub(x => x.ValidateUser("someuser", "somepass")) .Return(false); return controller; } public class LogOn { [Fact] public void Get_ReturnsViewResultWithDefaultViewName() { // Arrange var controller = GetAccountControllerForLogonSuccess(); // Act var result = controller.LogOn(); // Assert Assert.IsType<ViewResult>(result); Assert.Empty(((ViewResult)result).ViewName); } [Fact] public void Put_ReturnsOverviewRedirectToRouteResultIfLogonSuccessAndNoReturnUrlGiven() { // Arrange var controller = GetAccountControllerForLogonSuccess(); var user = new LogOnModel(); // Act var result = controller.LogOn(user, null); var redirectresult = (RedirectToRouteResult) result; // Assert Assert.IsType<RedirectToRouteResult>(result); Assert.Equal("Overview", redirectresult.RouteValues["controller"]); Assert.Equal("Index", redirectresult.RouteValues["action"]); } [Fact] public void Put_ReturnsRedirectResultIfLogonSuccessAndReturnUrlGiven() { // Arrange var controller = GetAccountControllerForLogonSuccess(); var user = new LogOnModel(); // Act var result = controller.LogOn(user, "someurl"); var redirectResult = (RedirectResult) result; // Assert Assert.IsType<RedirectResult>(result); Assert.Equal("someurl", redirectResult.Url); } [Fact] public void Put_ReturnsViewIfInvalidModelState() { // Arrange var controller = GetAccountControllerForLogonFailure(); var user = new LogOnModel(); controller.ModelState.AddModelError("*","Invalid model state."); // Act var result = controller.LogOn(user, "someurl"); var viewResult = (ViewResult) result; // Assert Assert.IsType<ViewResult>(result); Assert.Empty(viewResult.ViewName); Assert.Same(user,viewResult.ViewData.Model); } [Fact] public void Put_ReturnsViewIfLogonFailed() { // Arrange var controller = GetAccountControllerForLogonFailure(); var user = new LogOnModel(); // Act var result = controller.LogOn(user, "someurl"); var viewResult = (ViewResult) result; // Assert Assert.IsType<ViewResult>(result); Assert.Empty(viewResult.ViewName); Assert.Same(user,viewResult.ViewData.Model); Assert.Equal(false,viewResult.ViewData.ModelState.IsValid); } } }

  Read the article

< Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >