Search Results

Search found 72456 results on 2899 pages for 'work experience'.

Page 608/2899 | < Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >

• spontaneous hard disk password

  - by sc

  I had an HP proliant server go down recently. All of the sudden the sas controller (e200i) would not see any of the physical disks. New disks were detected just fine. I thought it was odd that all 6 disks would go down at one time so sent them to a data recovery firm to find out what happened. I'm being told that, somehow, all of the disks were spontaneously password protected. These are Hitachi 2.5" drives and I guess this is something of a known issue. The company has worked for a while to try and recover them, with no luck. Has anyone had experience with this? Any recommendations for how to recover the drives or a company that might have the expertise to do so?

  Read the article

• Colocation and HSRP setup

  - by WinkyWolly

  My colocation provider has setup HSRP for us and has provided us 2 drops (plugged into 1/1/1 and 1/1/2) from their routers as well as a /29 with 2 HSRP IP's and the rest of the /29 usable for the switch. I know that HSRP should be pretty much plug and play as long as the ports are in the same VLAN. However I'm confused as to how to the IP setup should work. Currently I've assigned port 1/1/1 the full /29 however I think this is incorrect because if I were to unplug it port 1/1/2 wouldn't work as it has no IP assignment. What's the proper way to do this?

  Read the article

• ubuntu grep command

  - by user34104

  i wanna find all cicle for into ubuntu i write: grep for(* /usr/include don't work...why?

  Read the article

• How to link data in different worksheets

  - by user2961726

  I tried consolidation but I can not get the following to work as it keeps saying no data consolidated. Can somebody try this dummy application and if they figure out how to do the following below can give me a step by step guide so I can attempt myself to learn. I'm not sure if I need to use any coding for this: In the dummy application I have 2 worksheets. One known as "1st", the other "Cases". In the "1st" worksheet you can insert and delete records for the "Case" table at the bottom, what I want to do is insert a row into the Case Table in worksheet "1st" and enter in the data for that row. What should happen is that data should be automatically be updated in the table in the "Cases" worksheet. But I can't seem to get this to work. Also if I delete a row from the table in Worksheet "1st" it should automatically remove that record from the "Cases" worksheet table. Please help. Below is the spreadsheet: http://ge.tt/8sjdkVx/v/0

  Read the article

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• How to Virtualize an OEM windows install.

  - by jumentous

  I've bought a new computer and like always it comes with windows 7 pre-installed. I'm a linux user by default but i still keep a virtual windows installation around. Is it possible to install my linux distribution, and use the OEM license that came with the computer to create the virtual instance? I have no intention of moving the license off the physical machine so i'm sure i could argue that i'm not violating the license but i don't expect that this would work and activate without great legal battles. So in the event that this doesn't work what other options do i have? Can i shrink the physical partition and have Qemu boot it? My thoughts are that windows would detect the change in hardware and fail. What can i do with this windows install as a linux user?

  Read the article

• nginx static file buffer

  - by Philip

  I have a nfs which several frontend-servers are connected to for making the files stored on the nfs available for http downloads. It looks like I have problems with the way apache is serving the files, there seems to be a very small buffer or no buffer at all which results in a lot disk seeks. I did some testing with loading the whole requested file into memory at once and serve it to the client from memory. With this technique I need less disk seeks for a download stream. Since I don't want to implement this by myself for production use I thought that I could maybe use nginx for that because the documentation says that it uses buffers for static file serving. Is it possible to increase the buffer size to a few mb, if so which config parameter do I have to change for this? Has anyone experience with large buffers for static file serving? Is there a better way to reduce disk seeks?

  Read the article

• TCP > COM1 for receiving messages and displaying on POS display pole

  - by JakeTheSnake

  I currently have a Java Applet running on my web page that communicates to a display pole via COM1. However since the Java update I can no longer run self-signed Java Applets and I figure it would just be easier to send an AJAX request back to the server and have the server send a response to a TCP port on the computer...the computer would need a TCP COM virtual adapter. How do I install a virtual adapter to go from a TCP port to COM1? I've looked into com0com and that is just confusing as hell to me, and I don't see how to connect any ports to COM1. I've tried tcp2com but it doesn't seem to install the service in Windows 7 x64. I've tried com2tcp and the interface seems like it WOULD work (I haven't tested), but I don't want an app running on the desktop...it needs to be a service that runs in the background. So to summarize how it would work: Web page on comp1 sends AJAX request to server Server sends text response to comp1 on port 999 comp1 has virtual COM port listening on port 999, sends data to COM1 pole displays data

  Read the article

• Acrobat keyboard stealing in Firefox

  - by Uiy

  There are times when I open a pdf in firefox(which uses the acrobat plugin) and the "pdf" steals control of the keyboard. The arrow keys do not work in other programs. Well, If I hold them down they will then work but it becomes hard to navigate that way. It seems acrobat installs a global keyboard hook in some cases and takes control of the keyboard. This didn't start happening until recently(a few months ago). Note that it doesn't happen on all pdfs and everything returns to normal when the pdf is closed. This seems to be an issue with acrobat... maybe a setting? Anyone have any ideas what is going on?

  Read the article

• What is the best way to make Calculate SHA1 as a context menu option in Mac OS X?

  - by Andrei

  In order to calculate the SHA1 checksum of a downloaded file, I could type /usr/bin/openssl sha1 in Terminal and then drag there the file which I want check. To make it simpler, one could enable a Context Menu item for this action. What is the best way to create such item in Mac OS X 10.6? A detailed answer is appreciated, because I don't have good experience with AppleScript, etc. Step by step Open Automator Create new service Choose to receive selected Files and Folders in Finder Add action Run Shell Script where your bash command is /usr/bin/openssl sha1 "$@" and you pass input as arguments How can I get the output? Preferably in a Growl pop-up or a message window/dialog.

  Read the article

• List existing file server permission groups/users

  - by Patrick

  So we have taken over a new client and their existing file server is frankly a mess. We have migrated their old file server from a 2k box to a 2k8 DFS cluster and now I'm looking at rebuilding both the folder structure and their permissions. Unfortunately its been half done with AD groups (poorly named/no description/notes) and half with individuals named in security on the folders themselves. What I'm looking to do is to dump a complete list of all the folders with their security permissions (ideally I'd like to ignore files but not essential). CACLS got me half way there but fails with an odd error message and its output isn't particularly user friendly and I'm working with roughly 2Tb/250,000 files here so I really need something that gives me a bit more functionality. Question : does anyone have any experience of something similar/know of a bit of software that might help me out?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Created new account instead of alias for original ID

  - by Mahesha999

  Hi I had Live ID for many years. To try Outlook.com I created a new ID. However now I want to use that same ID as an alias in my original Live account, which is also now upgraded to new Outlook Experience. When I went creating alias for that ID, it obviously showed message saying ID is in use. So I searched if I can delete an account altogether. But did not found anyway to delete that newly created account. Then I renamed my newly created ID. It got renamed, but that old ID is now made alias in that new account. So, still I am not able to create an alias with the same ID in my original Live account. What can I do?

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• App to slice'n'dice video, specifically remove chunks, on a Mac?

  - by Phillip Oldham

  I have a couple of collections of DVD Box-Sets I've ripped to my mac. Now I'd like to sweeten the viewing experience by removing the title sequences and credits so that viewing doesn't mean I have to keep reaching for the remote to skip 30 seconds of annoying music (think watching multiple episodes of Family Guy). If I can find an app that will let me do this reasonably quickly manually that would be great, but it would be perfect if I could dump a load of commands into a file and have everything trimmed while the mac is "inactive". I'm thinking that if I can specify chunks of time to remove from the original file that would be perfect. I had a quick look at importing into iMovie to do it manually and gave up at the "Processing Thumbnails" stage as it said it would be a couple of hours to produce them for a 45min mp4 file, which I can understand at 25fps but I'm not willing to wait, especially when I've got over a week's worth of files. Any suggestions?

  Read the article

• irssi keybinding: backward_word/forward_word

  - by vikenemesh

  I'm currently experimenting with irssi as my irc client of choice and I'm getting along pretty well. BUT there is one thing I still need to get done. Somehow it isn't possible for me to use the usual CTRL+Left/Right to navigate between words in my input line. For the record: I'm using irssi on a linux-box through a screen session brought to my windows machine via ssh/putty. I already tried some key binding in irssi, maybe I did them wrong? /bind meta-n backward_word /bind meta-m forward_word both work fine. But neither /bind ^left backward_word /bind ^right backward_word nor /bind cleft-left backward_word /bind cleft-right backward_word work for a CTRL+Left/Right setup. Any Ideas?

  Read the article

• How to connect to my US network overseas via VPN?

  - by GiH

  I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

  Read the article

• Automating the input of query criteria

  - by Steve Wren

  New user to this site and found an extremely informative answer to a question I had but can't find an answer to this one. Using Access 2010, I have 42 different criteria that I need to run individually using the same query. Rather than have 42 queries, or an input parameter dialogue box where I need to enter the criteria 42 times, can I automate this so that the 42 criteria are sourced sequentially from a different table and input to the query using a macro/ module etc. Unfortunately I have no experience of SQL/VBA so am struggling. Any help would be greatly appreciated.

  Read the article

• Black screen after scheduled resume from sleep

  - by macbirdie

  I have a problem with my two Windows 7 setups at home. Whenever a scheduled task wakes up the machines from sleep, a black screen with a mouse cursor appears. If I move the mouse or press any key, desktop appears. The biggest problem is that during that black screen phase the display, sometimes even the PC too, doesn't go to stand by after a set period of time in power settings. If I get the desktop to show up, standby functions work fine. Display goes blank after a few minutes and as soon as the task doesn't need the PC, it goes back to sleep. It's frustrating that this "feature" is wasting energy and keeps lighting up the pc in the middle of the night for me to find it that way after I wake up. I found a handful of threads on the intertubes about the issue, but there were no answers in any of them. It sometimes happens in my XP machine at work as well.

  Read the article

• How do I put back different SCSI hard drives into their original RAID arrays across different servers?

  - by Edgar

  I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• Cascading KVM switches

  - by einpoklum

  I have a not-so-small number of computers (say, 5) which I want to access with a single keyboard, USB and monitor. I can get an 8-port KVM switch, which is a pretty expensive piece of hardware; however, in theory, I should be able to cascade KVM switches: Have one 4-port KVM switch between 2 other KVMs (a 2-port and a 4-port). Is this doable (with typical off-the-shelf switches and cables)? Has anyone had experience doing this? Note: I'm interested in USB-only for the keyboard and mouse, and either VGA or DVI for the display. Audio and PS/2 connections are irrelevant for me..

  Read the article

• Calculate hit rate for apache proxy

  - by Richard

  When using apache as a proxy for a number of clients how can I work out the hit rate for the cached items?

  Read the article

• Would requiring .Net 4.0 act as a bar to adopting our software in a corporate environment?

  - by Sam

  We are developing a software product in .Net targeting large corporates. The product has both server and desktop client components. We anticipate that our product will be used by a small subset of workers in the corporation - probably those in the Finance function. We currently require .Net 3.5 but are considering moving to .Net 4. Could anyone with experience of managing IT in such an environment tell us whether requiring .Net 4.0 at this stage would be a bar to adopting our software? What attitudes prevail regarding the use of frameworks like .Net?

  Read the article

• Virtualization Solution for Family Use

  - by Dave Potts

  I'm trying to put together a solution for my family (wife + three kids). At the moment I have one newish desktop and a couple of aging laptops. There are always arguments over who should have the fast desktop. I'm thinking I would like to invest in a new powerful server and then run virtual desktops for each user off the server so that each user would have the same experience regardless of which actual PC they were using. I would like to use just a Linux based desktop, but unfortunately I need to support some Windows games for the kids. I've not tried wine for the games but would be willing to give it a try. Any advice on what the setup should be would be most appreciated.

  Read the article

< Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >