Search Results

Search found 15376 results on 616 pages for 'once'.

Page 609/616 | < Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >

• C++ Program performs better when piped

  - by ET1 Nerd

  I haven't done any programming in a decade. I wanted to get back into it, so I made this little pointless program as practice. The easiest way to describe what it does is with output of my --help codeblock: ./prng_bench --help ./prng_bench: usage: ./prng_bench $N $B [$T] This program will generate an N digit base(B) random number until all N digits are the same. Once a repeating N digit base(B) number is found, the following statistics are displayed: -Decimal value of all N digits. -Time & number of tries taken to randomly find. Optionally, this process is repeated T times. When running multiple repititions, averages for all N digit base(B) numbers are displayed at the end, as well as total time and total tries. My "problem" is that when the problem is "easy", say a 3 digit base 10 number, and I have it do a large number of passes the "total time" is less when piped to grep. ie: command ; command |grep took : ./prng_bench 3 10 999999 ; ./prng_bench 3 10 999999|grep took .... Pass# 999999: All 3 base(10) digits = 3 base(10). Time: 0.00005 secs. Tries: 23 It took 191.86701 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. An average of 0.00019 secs & 99 tries was needed to find each one. It took 159.32355 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. If I run the same command many times w/o grep time is always VERY close. I'm using srand(1234) for now, to test. The code between my calls to clock_gettime() for start and stop do not involve any stream manipulation, which would obviously affect time. I realize this is an exercise in futility, but I'd like to know why it behaves this way. Below is heart of the program. Here's a link to the full source on DB if anybody wants to compile and test. https://www.dropbox.com/s/6olqnnjf3unkm2m/prng_bench.cpp clock_gettime() requires -lrt. for (int pass_num=1; pass_num<=passes; pass_num++) { //Executes $passes # of times. clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time start_time = timetodouble(temp_time); //convert time to double, store as start_time for(i=1, tries=0; i!=0; tries++) { //loops until 'comparison for' fully completes. counts reps as 'tries'. <------------ for (i=0; i<Ndigits; i++) //Move forward through array. | results[i]=(rand()%base); //assign random num of base to element (digit). | /*for (i=0; i<Ndigits; i++) //---Debug Lines--------------- | std::cout<<" "<<results[i]; //---a LOT of output.---------- | std::cout << "\n"; //---Comment/decoment to disable/enable.*/ // | for (i=Ndigits-1; i>0 && results[i]==results[0]; i--); //Move through array, != element breaks & i!=0, new digits drawn. -| } //If all are equal i will be 0, nested for condition satisfied. -| clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time draw_time = (timetodouble(temp_time) - start_time); //convert time to dbl, subtract start_time, set draw_time to diff. total_time += draw_time; //add time for this pass to total. total_tries += tries; //add tries for this pass to total. /*Formated output for each pass: Pass# ---: All -- base(--) digits = -- base(10) Time: ----.---- secs. Tries: ----- (LINE) */ std::cout<<"Pass# "<<std::setw(width_pass)<<pass_num<<": All "<<Ndigits<<" base("<<base<<") digits = " <<std::setw(width_base)<<results[0]<<" base(10). Time: "<<std::setw(width_time)<<draw_time <<" secs. Tries: "<<tries<<"\n"; } if(passes==1) return 0; //No need for totals and averages of 1 pass. /* It took ----.---- secs & ------ tries to find --- repeating -- digit base(--) numbers. (LINE) An average of ---.---- secs & ---- tries was needed to find each one. (LINE)(LINE) */ std::cout<<"It took "<<total_time<<" secs & "<<total_tries<<" tries to find " <<passes<<" repeating "<<Ndigits<<" digit base("<<base<<") numbers.\n" <<"An average of "<<total_time/passes<<" secs & "<<total_tries/passes <<" tries was needed to find each one. \n\n"; return 0;

  Read the article

• Fastest way to move records from an Oracle database into SQL Server

  - by user347748

  Ok this is the scenario... I have a table in Oracle that acts like a queue... A VB.net program reads the queue and calls a stored proc in SQL Server that processes and then inserts the message into another SQL Server table and then deletes the record from the oracle table. We use a DataReader to read the records from Oracle and then call the stored proc for each of the records. The program seems to be a little slow. The stored procedure itself isn't slow. The SP by itself when called in a loop can process about 2000 records in 20 seconds. But when called from the .Net program, the execution time is about 5 records per second. I have seen that most of the time consumed is in calling the stored procedure and waiting for it to return. Is there a better way of doing this? Here is a snippet of the actual code Function StartDataXfer() As Boolean Dim status As Boolean = False Try SqlConn.Open() OraConn.Open() c.ErrorLog(Now.ToString & "--Going to Get the messages from oracle", 1) If GetMsgsFromOracle() Then c.ErrorLog(Now.ToString & "--Got messages from oracle", 1) If ProcessMessages() Then c.ErrorLog(Now.ToString & "--Finished Processing all messages in the queue", 0) status = True Else c.ErrorLog(Now.ToString & "--Failed to Process all messages in the queue", 0) status = False End If Else status = True End If StartDataXfer = status Catch ex As Exception Finally SqlConn.Close() OraConn.Close() End Try End Function Private Function GetMsgsFromOracle() As Boolean Try OraDataAdapter = New OleDb.OleDbDataAdapter OraDataTable = New System.Data.DataTable OraSelCmd = New OleDb.OleDbCommand GetMsgsFromOracle = False With OraSelCmd .CommandType = CommandType.Text .Connection = OraConn .CommandText = GetMsgSql End With OraDataAdapter.SelectCommand = OraSelCmd OraDataAdapter.Fill(OraDataTable) If OraDataTable.Rows.Count > 0 Then GetMsgsFromOracle = True End If Catch ex As Exception GetMsgsFromOracle = False End Try End Function Private Function ProcessMessages() As Boolean Try ProcessMessages = False PrepareSQLInsert() PrepOraDel() i = 0 Dim Method As Integer Dim OraDataRow As DataRow c.ErrorLog(Now.ToString & "--Going to call message sending procedure", 2) For Each OraDataRow In OraDataTable.Rows With OraDataRow Method = GetMethod(.Item(0)) SQLInsCmd.Parameters("RelLifeTime").Value = c.RelLifetime SQLInsCmd.Parameters("Param1").Value = Nothing SQLInsCmd.Parameters("ID").Value = GenerateTransactionID() ' Nothing SQLInsCmd.Parameters("UID").Value = Nothing SQLInsCmd.Parameters("Param").Value = Nothing SQLInsCmd.Parameters("Credit").Value = 0 SQLInsCmd.ExecuteNonQuery() 'check the return value If SQLInsCmd.Parameters("ReturnValue").Value = 1 And SQLInsCmd.Parameters("OutPutParam").Value = 0 Then 'success 'delete the input record from the source table once it is logged c.ErrorLog(Now.ToString & "--Moved record successfully", 2) OraDataAdapter.DeleteCommand.Parameters("P(0)").Value = OraDataRow.Item(6) OraDataAdapter.DeleteCommand.ExecuteNonQuery() c.ErrorLog(Now.ToString & "--Deleted record successfully", 2) OraDataAdapter.Update(OraDataTable) c.ErrorLog(Now.ToString & "--Committed record successfully", 2) i = i + 1 Else 'failure c.ErrorLog(Now.ToString & "--Failed to exec: " & c.DestIns & "Status: " & SQLInsCmd.Parameters("OutPutParam").Value & " and TrackId: " & SQLInsCmd.Parameters("TrackID").Value.ToString, 0) End If If File.Exists("stop.txt") Then c.ErrorLog(Now.ToString & "--Stop File Found", 1) 'ProcessMessages = True 'Exit Function Exit For End If End With Next OraDataAdapter.Update(OraDataTable) c.ErrorLog(Now.ToString & "--Updated Oracle Table", 1) c.ErrorLog(Now.ToString & "--Moved " & i & " records from Oracle to SQL Table", 1) ProcessMessages = True Catch ex As Exception ProcessMessages = False c.ErrorLog(Now.ToString & "--MoveMsgsToSQL: " & ex.Message, 0) Finally OraDataTable.Clear() OraDataTable.Dispose() OraDataAdapter.Dispose() OraDelCmd.Dispose() OraDelCmd = Nothing OraSelCmd = Nothing OraDataTable = Nothing OraDataAdapter = Nothing End Try End Function Public Function GenerateTransactionID() As Int64 Dim SeqNo As Int64 Dim qry As String Dim SqlTransCmd As New OleDb.OleDbCommand qry = " select seqno from StoreSeqNo" SqlTransCmd.CommandType = CommandType.Text SqlTransCmd.Connection = SqlConn SqlTransCmd.CommandText = qry SeqNo = SqlTransCmd.ExecuteScalar If SeqNo > 2147483647 Then qry = "update StoreSeqNo set seqno=1" SqlTransCmd.CommandText = qry SqlTransCmd.ExecuteNonQuery() GenerateTransactionID = 1 Else qry = "update StoreSeqNo set seqno=" & SeqNo + 1 SqlTransCmd.CommandText = qry SqlTransCmd.ExecuteNonQuery() GenerateTransactionID = SeqNo End If End Function Private Function PrepareSQLInsert() As Boolean 'function to prepare the insert statement for the insert into the SQL stmt using 'the sql procedure SMSProcessAndDispatch Try Dim dr As DataRow SQLInsCmd = New OleDb.OleDbCommand With SQLInsCmd .CommandType = CommandType.StoredProcedure .Connection = SqlConn .CommandText = SQLInsProc .Parameters.Add("ReturnValue", OleDb.OleDbType.Integer) .Parameters("ReturnValue").Direction = ParameterDirection.ReturnValue .Parameters.Add("OutPutParam", OleDb.OleDbType.Integer) .Parameters("OutPutParam").Direction = ParameterDirection.Output .Parameters.Add("TrackID", OleDb.OleDbType.VarChar, 70) .Parameters.Add("RelLifeTime", OleDb.OleDbType.TinyInt) .Parameters("RelLifeTime").Direction = ParameterDirection.Input .Parameters.Add("Param1", OleDb.OleDbType.VarChar, 160) .Parameters("Param1").Direction = ParameterDirection.Input .Parameters.Add("TransID", OleDb.OleDbType.VarChar, 70) .Parameters("TransID").Direction = ParameterDirection.Input .Parameters.Add("UID", OleDb.OleDbType.VarChar, 20) .Parameters("UID").Direction = ParameterDirection.Input .Parameters.Add("Param", OleDb.OleDbType.VarChar, 160) .Parameters("Param").Direction = ParameterDirection.Input .Parameters.Add("CheckCredit", OleDb.OleDbType.Integer) .Parameters("CheckCredit").Direction = ParameterDirection.Input .Prepare() End With Catch ex As Exception c.ErrorLog(Now.ToString & "--PrepareSQLInsert: " & ex.Message) End Try End Function Private Function PrepOraDel() As Boolean OraDelCmd = New OleDb.OleDbCommand Try PrepOraDel = False With OraDelCmd .CommandType = CommandType.Text .Connection = OraConn .CommandText = DelSrcSQL .Parameters.Add("P(0)", OleDb.OleDbType.VarChar, 160) 'RowID .Parameters("P(0)").Direction = ParameterDirection.Input .Prepare() End With OraDataAdapter.DeleteCommand = OraDelCmd PrepOraDel = True Catch ex As Exception PrepOraDel = False End Try End Function WHat i would like to know is, if there is anyway to speed up this program? Any ideas/suggestions would be highly appreciated... Regardss, Chetan

  Read the article

• why my application sometimes got error in early launch?

  - by Hendra

  I have some problem. sometimes when I just try to run my application, it is going to be force close. I don't know why it is going to be happened. here are my source code. AlertDialog.Builder alert = new AlertDialog.Builder(this); alert.setCancelable(false); //AlertDialog.Builder alert = new AlertDialog.Builder(this); ..... alert.setPositiveButton("Ok", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int whichButton) { no_pasien = no_pas.getText().toString(); new LoginProses().execute(); ..... alert.show(); class LoginProses extends AsyncTask<String, String, String> { protected void onPreExecute() { super.onPreExecute(); ...... } protected String doInBackground(String... args) { List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("no_pasien", no)); JSONObject json = jsonParser.makeHttpRequest(url_login, "POST", params); try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully created product pasien = json.getJSONArray("pasien"); JSONObject c = pasien.getJSONObject(0); int id = c.getInt("id"); new Temporary().setIdPasien(id); Intent goMainAct = new Intent(); // goMainAct.putExtra("id", id); goMainAct.setClass(Login.this, MainActivity.class); finish(); startActivity(goMainAct); } else { // failed to create product Intent getReload = getIntent(); getReload.putExtra("status", 1); finish(); startActivity(getReload); } } catch (JSONException e) { if(pDialog.isShowing()){ pDialog.dismiss(); } } return null; } protected void onPostExecute(String file_url) { // dismiss the dialog once done pDialog.dismiss(); } } here is the log error for my problem: //HERE IS THE LOG: 06-25 22:57:23.836: E/WindowManager(7630): Activity com.iteadstudio.Login has leaked window com.android.internal.policy.impl.PhoneWindow$DecorView@41939850 that was originally added here 06-25 22:57:23.836: E/WindowManager(7630): android.view.WindowLeaked: Activity com.iteadstudio.Login has leaked window com.android.internal.policy.impl.PhoneWindow$DecorView@41939850 that was originally added here 06-25 22:57:23.836: E/WindowManager(7630): at android.view.ViewRootImpl.<init>(ViewRootImpl.java:344) 06-25 22:57:23.836: E/WindowManager(7630): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:267) 06-25 22:57:23.836: E/WindowManager(7630): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:215) 06-25 22:57:23.836: E/WindowManager(7630): at android.view.WindowManagerImpl$CompatModeWrapper.addView(WindowManagerImpl.java:140) 06-25 22:57:23.836: E/WindowManager(7630): at android.view.Window$LocalWindowManager.addView(Window.java:537) 06-25 22:57:23.836: E/WindowManager(7630): at android.app.Dialog.show(Dialog.java:278) 06-25 22:57:23.836: E/WindowManager(7630): at com.iteadstudio.Login$LoginProses.onPreExecute(Login.java:122) 06-25 22:57:23.836: E/WindowManager(7630): at android.os.AsyncTask.executeOnExecutor(AsyncTask.java:561) 06-25 22:57:23.836: E/WindowManager(7630): at android.os.AsyncTask.execute(AsyncTask.java:511) 06-25 22:57:23.836: E/WindowManager(7630): at com.iteadstudio.Login$3.onClick(Login.java:95) 06-25 22:57:23.836: E/WindowManager(7630): at com.android.internal.app.AlertController$ButtonHandler.handleMessage(AlertController.java:166) 06-25 22:57:23.836: E/WindowManager(7630): at android.os.Handler.dispatchMessage(Handler.java:99) 06-25 22:57:23.836: E/WindowManager(7630): at android.os.Looper.loop(Looper.java:137) 06-25 22:57:23.836: E/WindowManager(7630): at android.app.ActivityThread.main(ActivityThread.java:4441) 06-25 22:57:23.836: E/WindowManager(7630): at java.lang.reflect.Method.invokeNative(Native Method) 06-25 22:57:23.836: E/WindowManager(7630): at java.lang.reflect.Method.invoke(Method.java:511) 06-25 22:57:23.836: E/WindowManager(7630): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:823) 06-25 22:57:23.836: E/WindowManager(7630): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:590) 06-25 22:57:23.836: E/WindowManager(7630): at dalvik.system.NativeStart.main(Native Method) 06-25 22:57:23.946: D/dalvikvm(7630): GC_CONCURRENT freed 782K, 6% free 14319K/15203K, paused 4ms+3ms 06-25 22:57:23.976: D/AndroidRuntime(7630): Shutting down VM 06-25 22:57:23.976: W/dalvikvm(7630): threadid=1: thread exiting with uncaught exception (group=0x40ab4210) 06-25 22:57:23.986: E/AndroidRuntime(7630): FATAL EXCEPTION: main 06-25 22:57:23.986: E/AndroidRuntime(7630): java.lang.IllegalArgumentException: View not attached to window manager 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.view.WindowManagerImpl.findViewLocked(WindowManagerImpl.java:587) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.view.WindowManagerImpl.removeView(WindowManagerImpl.java:324) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.view.WindowManagerImpl$CompatModeWrapper.removeView(WindowManagerImpl.java:151) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.app.Dialog.dismissDialog(Dialog.java:321) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.app.Dialog$1.run(Dialog.java:119) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.app.Dialog.dismiss(Dialog.java:306) 06-25 22:57:23.986: E/AndroidRuntime(7630): at com.iteadstudio.Login$LoginProses.onPostExecute(Login.java:177) 06-25 22:57:23.986: E/AndroidRuntime(7630): at com.iteadstudio.Login$LoginProses.onPostExecute(Login.java:1) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.os.AsyncTask.finish(AsyncTask.java:602) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.os.AsyncTask.access$600(AsyncTask.java:156) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.os.AsyncTask$InternalHandler.handleMessage(AsyncTask.java:615) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.os.Handler.dispatchMessage(Handler.java:99) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.os.Looper.loop(Looper.java:137) 06-25 22:57:23.986: E/AndroidRuntime(7630): at android.app.ActivityThread.main(ActivityThread.java:4441) 06-25 22:57:23.986: E/AndroidRuntime(7630): at java.lang.reflect.Method.invokeNative(Native Method) 06-25 22:57:23.986: E/AndroidRuntime(7630): at java.lang.reflect.Method.invoke(Method.java:511) 06-25 22:57:23.986: E/AndroidRuntime(7630): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:823) 06-25 22:57:23.986: E/AndroidRuntime(7630): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:590) 06-25 22:57:23.986: E/AndroidRuntime(7630): at dalvik.system.NativeStart.main(Native Method)

  Read the article

• How to get data from dynamically created EditText views and insert it into an array?

  - by Snwspeckle

  So basically what I need my program to do at this point is that when I click the submit button, I need to loop through each dynamic row of the ListView and grab the value in the EditText view and then insert that into an array which I will do further calculations after. Here is my code right now. package com.hello_world; import java.util.ArrayList; import com.hello_world.ByteInputActivity.MyAdapter.ViewHolder; import android.app.Activity; import android.content.Context; import android.os.Bundle; import android.util.Log; import android.view.KeyEvent; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnFocusChangeListener; import android.view.View.OnKeyListener; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.Button; import android.widget.EditText; import android.widget.ListView; import android.widget.TextView; public class ByteInputActivity extends Activity { private ListView myList; private MyAdapter myAdapter; private Integer resQuestions; private Integer indexVal = 0; private View caption; ViewHolder holder; ArrayList<Integer> intArrayList = new ArrayList<Integer>(); @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fieldlist); //Gets number of questions from MainActivity Bundle extras = getIntent().getExtras(); if(extras !=null) { resQuestions = extras.getInt("index"); } myList = (ListView) findViewById(R.id.FieldList); myList.setItemsCanFocus(true); myAdapter = new MyAdapter(); myList.setAdapter(myAdapter); Button submit = (Button) findViewById(R.id.btn_New); submit.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { for (int i = 0; i < myList.getCount() ; i++) { View vListSortOrder; vListSortOrder = myList.getChildAt(i); String temp = holder.caption.getText().toString(); Log.e("VALUES", "" +temp); } } }); } public class MyAdapter extends BaseAdapter { private LayoutInflater mInflater; public ArrayList myItems = new ArrayList(); public MyAdapter() { mInflater = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); for (int i = 0; i < resQuestions; i++) { ListItem listItem = new ListItem(); listItem.caption = "Index " + i; listItem.indexText = "Index " + i; myItems.add(listItem); indexVal += 1; } notifyDataSetChanged(); } public int getCount() { return myItems.size(); } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { if (convertView == null) { holder = new ViewHolder(); convertView = mInflater.inflate(R.layout.item, null); holder.indexText = (TextView) convertView .findViewById(R.id.textView1); holder.caption = (EditText) convertView .findViewById(R.id.ItemCaption); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } //Fill EditText with the value you have in data source holder.caption.setText(""); holder.caption.setId(position); holder.indexText.setText("Index " + position); holder.indexText.setId(position); //we need to update adapter once we finish with editing holder.caption.setOnFocusChangeListener(new OnFocusChangeListener() { public void onFocusChange(View v, boolean hasFocus) { if (!hasFocus){ final int position = v.getId(); final EditText Caption = (EditText) v; myItems.set(position, Caption.getText().toString()); } } }); return convertView; } class ViewHolder { EditText caption; TextView indexText; } class ListItem { String caption; String indexText; } } }

  Read the article

• setting up linked list Java

  - by erp

  I'm working on some basic linked list stuff, like insert, delete, go to the front or end of the list, and basically i understand the concept of all of that stuff once i have the list i guess but im having trouble setting up the list. I was wondering of you guys could tell me if im going in the right direction. (mostly just the setup) this is what i have so far: public class List { private int size; private List linkedList; List head; List cur; List next; /** * Creates an empty list. * @pre * @post */ public List(){ linkedList = new List(); this.head = null; cur = head; } /** * Delete the current element from this list. The element after the deleted element becomes the new current. * If that's not possible, then the element before the deleted element becomes the new current. * If that is also not possible, then you need to recognize what state the list is in and define current accordingly. * Nothing should be done if a delete is not possible. * @pre * @post */ public void delete(){ // delete size--; } /** * Get the value of the current element. If this is not possible, throw an IllegalArgumentException. * @pre the list is not empty * @post * @return value of the current element. */ public char get(){ return getItem(cur); } /** * Go to the last element of the list. If this is not possible, don't change the cursor. * @pre * @post */ public void goLast(){ while (cur.next != null){ cur = cur.next; } } /** * Advance the cursor to the next element. If this is not possible, don't change the cursor. * @pre * @post */ public void goNext(){ if(cur.next != null){ cur = cur.next;} //else do nothing } /** * Retreat the cursor to the previous element. If this is not possible, don't change the cursor. * @pre * @post */ public void goPrev(){ } /** * Go to top of the list. This is the position before the first element. * @pre * @post */ public void goTop(){ } /** * Go to first element of the list. If this is not possible, don't change the cursor. * @pre * @post */ public void goFirst(){ } /** * Insert the given parameter after the current element. The newly inserted element becomes the current element. * @pre * @post * @param newVal : value to insert after the current element. */ public void insert(char newVal){ cur.setItem(newVal); size++; } /** * Determines if this list is empty. Empty means this list has no elements. * @pre * @post * @return true if the list is empty. */ public boolean isEmpty(){ return head == null; } /** * Determines the size of the list. The size of the list is the number of elements in the list. * @pre * @post * @return size which is the number of elements in the list. */ public int size(){ return size; } public class Node { private char item; private Node next; public Node() { } public Node(char item) { this.item = item; } public Node(char item, Node next) { this.item = item; this.next = next; } public char getItem() { return this.item; } public void setItem(char item) { this.item = item; } public Node getNext() { return this.next; } public void setNext(Node next) { this.next = next; } } } I got the node class alright (well i think it works alright), but is it necessary to even have that class? or can i go about it without even using it (just curious). And for example on the method get() in the list class can i not call that getItem() method from the node class because it's getting an error even though i thought that was the whole point for the node class. bottom line i just wanna make sure im setting up the list right. Thanks for any help guys, im new to linked list's so bear with me!

  Read the article

• Microsoft Management Console stops working when I add snap-in to it

  - by JayaprakashReddy

  I have Windows 7 Ultimate OS. I'm opening mmc.exe as administrator and trying add Certificates or any other snap-in, then while loading that snap-in MMC breaks and displays following message and after that it closes automatically once I click on close button on that message. What could be the problem? I did following to fix the problem but couldn't succeed any of these: I tried to repair the OS I repaired files using this method Even repaired the installation using this link Update: *@oldskool: Here is the debug process output:* Sorry its a long output text. 'mmc.exe': Loaded 'C:\Windows\System32\mmc.exe', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\kernel32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\KernelBase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gdi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\user32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\lpk.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\usp10.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msvcrt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ole32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rpcrt4.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleaut32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbc32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\advapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sechost.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shlwapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\uxtheme.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\duser.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imm32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msctf.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbcint.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dui70.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shell32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\urlmon.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wininet.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\iertutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\crypt32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msasn1.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\clbcatq.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcndmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dwmapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleacc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptsp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rsaenh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\RpcRtRemote.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mlang.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\xmllite.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\version.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\apphelp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Bin\mscormmc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mscoree.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcr80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\azroleui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\atl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\secur32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netutils.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsrole.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\logoncli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsuiext.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdsapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ws2_32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\nsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\activeds.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\adsldpc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\Wldap32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mpr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\srvcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wkscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\CertEnroll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ncrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\bcrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wintrust.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imagehlp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sspicli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\aclui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\IPHLPAPI.DLL', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winnsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\slc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mycomput.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\setupapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cfgmgr32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devobj.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devrtl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\newdev.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres2.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\gpedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dssec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\authz.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dfscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\samcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gpapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\framedynos.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wtsapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsmsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winipsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\userenv.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\profapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsecsnp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\polstore.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\localsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wdc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdhui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comdlg32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\credui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wevtapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pla.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\tdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winsta.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\utildll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\browcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\vdmdbg.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pmcsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winspool.drv', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\puiapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wsecedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\scecli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\filemgmt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_cbf21254470d8752\mfc80u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcp80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\ATL80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7600.16661_none_ebfb56996c72aefc\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_03ca5532205cb096\mfc80ENU.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\Resources\1033\SqlManager.rll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\msxml6.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\90\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wbem\wbemcntl.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xf74) has exited with code 0 (0x0). Unhandled exception at 0x774d35e3 in mmc.exe: 0xC0000374: A heap has been corrupted.

  Read the article

• Trying to install mysql then lots of brew doctor errors

  - by gdi2290

  I couldn't install mysql I get this brew install mysql Error: You must `brew link cmake' before mysql can be installed so then I type brew ink cmake Linking /usr/local/Cellar/cmake/2.8.8... Error: Could not symlink file: /usr/local/Cellar/cmake/2.8.8/share/doc/cmake /usr/local/share/doc is not writable. You should change its permissions. when I typed brew doctor I get this Error: Some directories in /usr/local/share/locale aren't writable. This can happen if you "sudo make install" software that isn't managed by Homebrew. If a brew tries to add locale information to one of these directories, then the install will fail during the link step. You should probably chown them: /usr/local/share/locale/ar /usr/local/share/locale/ar/LC_MESSAGES /usr/local/share/locale/be /usr/local/share/locale/be/LC_MESSAGES /usr/local/share/locale/bg /usr/local/share/locale/bg/LC_MESSAGES /usr/local/share/locale/bs /usr/local/share/locale/bs/LC_MESSAGES /usr/local/share/locale/ca /usr/local/share/locale/ca/LC_MESSAGES /usr/local/share/locale/cs /usr/local/share/locale/cs/LC_MESSAGES /usr/local/share/locale/da /usr/local/share/locale/da/LC_MESSAGES /usr/local/share/locale/de /usr/local/share/locale/de/LC_MESSAGES /usr/local/share/locale/de_AT /usr/local/share/locale/de_AT/LC_MESSAGES /usr/local/share/locale/de_CH /usr/local/share/locale/de_CH/LC_MESSAGES /usr/local/share/locale/de_DE /usr/local/share/locale/de_DE/LC_MESSAGES /usr/local/share/locale/el /usr/local/share/locale/el/LC_MESSAGES /usr/local/share/locale/en_AU /usr/local/share/locale/en_AU/LC_MESSAGES /usr/local/share/locale/en_CA /usr/local/share/locale/en_CA/LC_MESSAGES /usr/local/share/locale/en_GB /usr/local/share/locale/en_GB/LC_MESSAGES /usr/local/share/locale/eo /usr/local/share/locale/eo/LC_MESSAGES /usr/local/share/locale/es /usr/local/share/locale/es/LC_MESSAGES /usr/local/share/locale/es_ES /usr/local/share/locale/es_ES/LC_MESSAGES /usr/local/share/locale/es_PE /usr/local/share/locale/es_PE/LC_MESSAGES /usr/local/share/locale/et /usr/local/share/locale/et/LC_MESSAGES /usr/local/share/locale/fi /usr/local/share/locale/fi/LC_MESSAGES /usr/local/share/locale/fr /usr/local/share/locale/fr/LC_MESSAGES /usr/local/share/locale/fr_FR /usr/local/share/locale/fr_FR/LC_MESSAGES /usr/local/share/locale/gl /usr/local/share/locale/gl/LC_MESSAGES /usr/local/share/locale/he /usr/local/share/locale/he/LC_MESSAGES /usr/local/share/locale/hi /usr/local/share/locale/hi/LC_MESSAGES /usr/local/share/locale/hr /usr/local/share/locale/hr/LC_MESSAGES /usr/local/share/locale/hu /usr/local/share/locale/hu/LC_MESSAGES /usr/local/share/locale/hu_HU /usr/local/share/locale/hu_HU/LC_MESSAGES /usr/local/share/locale/id /usr/local/share/locale/id/LC_MESSAGES /usr/local/share/locale/it /usr/local/share/locale/it/LC_MESSAGES /usr/local/share/locale/ja /usr/local/share/locale/ja/LC_MESSAGES /usr/local/share/locale/ka /usr/local/share/locale/ka/LC_MESSAGES /usr/local/share/locale/ko /usr/local/share/locale/ko/LC_MESSAGES /usr/local/share/locale/lv /usr/local/share/locale/lv/LC_MESSAGES /usr/local/share/locale/mr /usr/local/share/locale/mr/LC_MESSAGES /usr/local/share/locale/nb /usr/local/share/locale/nb/LC_MESSAGES /usr/local/share/locale/nds /usr/local/share/locale/nds/LC_MESSAGES /usr/local/share/locale/nl /usr/local/share/locale/nl/LC_MESSAGES /usr/local/share/locale/nn /usr/local/share/locale/nn/LC_MESSAGES /usr/local/share/locale/oc /usr/local/share/locale/oc/LC_MESSAGES /usr/local/share/locale/pl /usr/local/share/locale/pl/LC_MESSAGES /usr/local/share/locale/pt /usr/local/share/locale/pt/LC_MESSAGES /usr/local/share/locale/pt_BR /usr/local/share/locale/pt_BR/LC_MESSAGES /usr/local/share/locale/pt_PT /usr/local/share/locale/pt_PT/LC_MESSAGES /usr/local/share/locale/ro /usr/local/share/locale/ro/LC_MESSAGES /usr/local/share/locale/ru /usr/local/share/locale/ru/LC_MESSAGES /usr/local/share/locale/sk /usr/local/share/locale/sk/LC_MESSAGES /usr/local/share/locale/sr /usr/local/share/locale/sr/LC_MESSAGES /usr/local/share/locale/sv /usr/local/share/locale/sv/LC_MESSAGES /usr/local/share/locale/ta /usr/local/share/locale/ta/LC_MESSAGES /usr/local/share/locale/te /usr/local/share/locale/te/LC_MESSAGES /usr/local/share/locale/tr /usr/local/share/locale/tr/LC_MESSAGES /usr/local/share/locale/uk /usr/local/share/locale/uk/LC_MESSAGES /usr/local/share/locale/vi /usr/local/share/locale/vi/LC_MESSAGES /usr/local/share/locale/zh_CN /usr/local/share/locale/zh_CN/LC_MESSAGES /usr/local/share/locale/zh_HK /usr/local/share/locale/zh_HK/LC_MESSAGES /usr/local/share/locale/zh_TW /usr/local/share/locale/zh_TW/LC_MESSAGES Error: The /usr/local directory is not writable. Even if this directory was writable when you installed Homebrew, other software may change permissions on this directory. Some versions of the "InstantOn" component of Airfoil are known to do this. You should probably change the ownership and permissions of /usr/local back to your user account. Error: "config" scripts exist outside your system or Homebrew directories. ./configure scripts often look for *-config scripts to determine if software packages are installed, and what additional flags to use when compiling and linking. Having additional scripts in your path can confuse software installed via Homebrew if the config script overrides a system or Homebrew provided script of the same name. We found the following "config" scripts: /opt/sm/pkg/active/bin/curl-config /opt/sm/pkg/active/bin/ncurses5-config /opt/sm/pkg/active/bin/ncursesw5-config /opt/sm/pkg/active/bin/pkg-config /opt/sm/pkg/active/bin/xml2-config /opt/sm/pkg/active/bin/xslt-config Error: gettext was detected in your PREFIX. The gettext provided by Homebrew is "keg-only", meaning it does not get linked into your PREFIX by default. If you brew link gettext then a large number of brews that don't otherwise have a depends_on 'gettext' will pick up gettext anyway during the ./configure step. If you have a non-Homebrew provided gettext, other problems will happen especially if it wasn't compiled with the proper architectures. Error: Unbrewed dylibs were found in /usr/local/lib. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected dylibs: /usr/local/lib/libboost_filesystem-mt.dylib /usr/local/lib/libboost_serialization-mt.dylib /usr/local/lib/libboost_system-mt.dylib /usr/local/lib/libencfs.6.dylib /usr/local/lib/libintl.8.dylib /usr/local/lib/libmacfuse_i32.2.dylib /usr/local/lib/libmacfuse_i64.2.dylib /usr/local/lib/libosxfuse_i32.2.dylib /usr/local/lib/libosxfuse_i64.2.dylib /usr/local/lib/librlog.5.0.0.dylib Error: Unbrewed .la files were found in /usr/local/lib. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected .la files: /usr/local/lib/libosxfuse_i32.la /usr/local/lib/libosxfuse_i64.la Error: Unbrewed .pc files were found in /usr/local/lib/pkgconfig. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected .pc files: /usr/local/lib/pkgconfig/osxfuse.pc Error: You have unlinked kegs in your Cellar Leaving kegs unlinked can lead to build-trouble and cause brews that depend on those kegs to fail to run properly once built. cmake Error: Your pkg-config is not checking "/usr/X11/lib/pkgconfig" for packages. Earlier versions of the pkg-config formula did not add this path to the search path, which means that other formula may not be able to find certain dependencies. To resolve this issue, re-brew pkg-config with: brew rm pkg-config && brew install pkg-config Error: You have a non-Homebrew 'pkg-config' in your PATH: /opt/sm/pkg/active/bin/pkg-config ./configure may have problems finding brew-installed packages using this other pkg-config. Error: Your Xcode is configured with an invalid path. You should change it to the correct path. Please note that there is no correct path at this time if you have only installed the Command Line Tools for Xcode. If your Xcode is pre-4.3 or you installed the whole of Xcode 4.3 then one of these is (probably) what you want: sudo xcode-select -switch /Developer sudo xcode-select -switch /Applications/Xcode.app/Contents/Developer DO NOT SET / OR EVERYTHING BREAKS!

  Read the article

• SSRS Export to Excel not working through VPN (Juniper SA4000)

  - by Veynom

  We have a SharePoint (MOSS 2007 on Win2003 R2) with SSRS reports (from SQL 2005) embedded in it. When we connect to the SharePoint portal through our VPN (firewall is Juniper SA4000) and using Internet Explorer (6, 7, and 8) and try to export any SSRS report under Excel, we get an error message: Internet Explorer cannot download . Internet Explorer was not able to open the internet site. The requested site is either unavailable or cannot be found. Please try again later. When not using the VPN (LAN from the office), everything (exporting under Excel) works fine. When using Firefox through the VPN, it works fine. When exporting to any other format (pdf or text or whatever), everything is fine under both IE and FF. Our firewall people suspect something in SSRS/MOSS/Office. Our MOSS consultants suspect something in the firewall Juniper SA4000. When using Fiddler and when not connected through VPN, I see the following traffic once i click on the "Export button": (Response was a request for client credentials) GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp HTTP/1.1 401 Unauthorized Content-Length: 1656 Content-Type: text/html Server: Microsoft-IIS/6.0 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Mon, 08 Jun 2009 09:25:21 GMT Proxy-Support: Session-Based-Authentication then (Generic Response successful): GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp Authorization: Negotiate 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 HTTP/1.1 200 OK Date: Mon, 08 Jun 2009 09:25:21 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET WWW-Authenticate: Negotiate oYGgMIGdoAMKAQChCwYJKoZIgvcSAQICooGIBIGFYIGCBgkqhkiG9xIBAgICAG9zMHGgAwIBBaEDAgEPomUwY6ADAgEXolwEWm70xlMp4oj/PyvriNMeNDigow6/MX2DpaYQdBfGkiF0Dcc323tHLRBxBL03QpvwdGBxZGAJI6V1G8sc/lVBzhlCNsZkbJcNfnMNgOgc7UPrz+ZVav/EVm3sDQ== X-AspNet-Version: 2.0.50727 Content-Disposition: attachment; filename="Product Application Report.xls" Cache-Control: private Expires: Mon, 08 Jun 2009 09:24:21 GMT Content-Type: application/vnd.ms-excel Content-Length: 23012 When using the VPN, I see no traffic in Fiddler and the error message is displayed before anything else. Update 17/06/2009: I could get a hand on some logs from our SA4000. Maybe this could help more. Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/PROTOCOL] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Enable HTTP 1.1]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts2:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts3:80/*] does not match Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Disable HTTP 1.1]... Info PTR23239 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Action [HTTP 1.0] is returned Info PTR23234 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Policy [Disable HTTP 1.1] applies to resource Info PTR23308 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Skip Policy [WEBURL/COMPRESSION] evaluation because Compression option is not enabled Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/WEBPDSID] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Corporate BI Portal]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>/*] does not match Info PTR23235 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - No Policy applies to resource Any tip welcome. :)

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel.

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• Network Logon Issues with Group Policy and Network

  - by bobloki

  I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

  Read the article

• Building Awesome WM

  - by Dragan Chupacabrovic

  Hello, I am following these steps in order to build Awesome window manager on 10.04 I am building 3.4 while the tutorial is for 3.1 I installed all of the specified dependencies including cairo. EDIT I ran: sudo apt-get install libxcb-xtest0-dev libxcb-property1-dev libxdg-basedir-dev libstartup-notification0-dev and now it looks like I'm missing a library Please advise: >awesome-3.4$ make Running cmake… -- cat -> /bin/cat -- ln -> /bin/ln -- grep -> /bin/grep -- git -> /usr/bin/git -- hostname -> /bin/hostname -- gperf -> /usr/bin/gperf -- asciidoc -> /usr/bin/asciidoc -- xmlto -> /usr/bin/xmlto -- gzip -> /bin/gzip -- lua -> /usr/bin/lua -- luadoc -> /usr/bin/luadoc -- convert -> /usr/bin/convert -- Configuring lib/naughty.lua -- Configuring lib/awful/tooltip.lua -- Configuring lib/awful/init.lua -- Configuring lib/awful/titlebar.lua -- Configuring lib/awful/key.lua -- Configuring lib/awful/mouse/init.lua -- Configuring lib/awful/mouse/finder.lua -- Configuring lib/awful/autofocus.lua -- Configuring lib/awful/screen.lua -- Configuring lib/awful/rules.lua -- Configuring lib/awful/widget/init.lua -- Configuring lib/awful/widget/taglist.lua -- Configuring lib/awful/widget/graph.lua -- Configuring lib/awful/widget/tasklist.lua -- Configuring lib/awful/widget/common.lua -- Configuring lib/awful/widget/prompt.lua -- Configuring lib/awful/widget/launcher.lua -- Configuring lib/awful/widget/button.lua -- Configuring lib/awful/widget/layoutbox.lua -- Configuring lib/awful/widget/layout/init.lua -- Configuring lib/awful/widget/layout/vertical.lua -- Configuring lib/awful/widget/layout/horizontal.lua -- Configuring lib/awful/widget/layout/default.lua -- Configuring lib/awful/widget/progressbar.lua -- Configuring lib/awful/widget/textclock.lua -- Configuring lib/awful/dbus.lua -- Configuring lib/awful/remote.lua -- Configuring lib/awful/client.lua -- Configuring lib/awful/prompt.lua -- Configuring lib/awful/completion.lua -- Configuring lib/awful/tag.lua -- Configuring lib/awful/util.lua -- Configuring lib/awful/button.lua -- Configuring lib/awful/menu.lua -- Configuring lib/awful/hooks.lua -- Configuring lib/awful/wibox.lua -- Configuring lib/awful/layout/init.lua -- Configuring lib/awful/layout/suit/init.lua -- Configuring lib/awful/layout/suit/floating.lua -- Configuring lib/awful/layout/suit/fair.lua -- Configuring lib/awful/layout/suit/spiral.lua -- Configuring lib/awful/layout/suit/magnifier.lua -- Configuring lib/awful/layout/suit/tile.lua -- Configuring lib/awful/layout/suit/max.lua -- Configuring lib/awful/placement.lua -- Configuring lib/awful/startup_notification.lua -- Configuring lib/beautiful.lua -- Configuring themes/zenburn//theme.lua -- Configuring themes/default//theme.lua -- Configuring themes/sky//theme.lua -- Configuring config.h -- Configuring awesomerc.lua -- Configuring awesome-version-internal.h -- Configuring awesome.doxygen -- Configuring done -- Generating done -- Build files have been written to: /home/druden/util/awesome-3.4/.build-vedroid-i486-linux-gnu-4.4.3 Running make Makefile… Building… [ 4%] Built target generated_sources [ 5%] Building C object CMakeFiles/awesome.dir/awesome.c.o In file included from /home/druden/util/awesome-3.4/spawn.h:25, from /home/druden/util/awesome-3.4/awesome.c:33: /home/druden/util/awesome-3.4/globalconf.h:57: error: expected specifier-qualifier-list before ‘xcb_event_handlers_t’ In file included from /home/druden/util/awesome-3.4/awesome.c:34: /home/druden/util/awesome-3.4/client.h: In function ‘client_stack’: /home/druden/util/awesome-3.4/client.h:212: error: ‘awesome_t’ has no member named ‘client_need_stack_refresh’ /home/druden/util/awesome-3.4/client.h: In function ‘client_raise’: /home/druden/util/awesome-3.4/client.h:227: error: ‘awesome_t’ has no member named ‘stack’ In file included from /home/druden/util/awesome-3.4/awesome.c:42: /home/druden/util/awesome-3.4/titlebar.h: In function ‘titlebar_update_geometry’: /home/druden/util/awesome-3.4/titlebar.h:150: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:151: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:152: error: ‘awesome_t’ has no member named ‘L’ In file included from /home/druden/util/awesome-3.4/awesome.c:47: /home/druden/util/awesome-3.4/common/xutil.h: In function ‘xutil_get_text_property_from_reply’: /home/druden/util/awesome-3.4/common/xutil.h:39: warning: ‘STRING’ is deprecated (declared at /usr/local/include/xcb/xcb_atom.h:83) /home/druden/util/awesome-3.4/common/xutil.h: At top level: /home/druden/util/awesome-3.4/common/xutil.h:60: error: expected ‘)’ before ‘*’ token /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_atexit’: /home/druden/util/awesome-3.4/awesome.c:65: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:68: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:73: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:76: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:77: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: warning: type defaults to ‘int’ in declaration of ‘c’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:91: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:92: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:96: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c: In function ‘a_xcb_check_cb’: /home/druden/util/awesome-3.4/awesome.c:223: warning: implicit declaration of function ‘xcb_event_handle’ /home/druden/util/awesome-3.4/awesome.c:223: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:230: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_restart’: /home/druden/util/awesome-3.4/awesome.c:277: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c: In function ‘xerror’: /home/druden/util/awesome-3.4/awesome.c:305: error: ‘XCB_EVENT_ERROR_BAD_WINDOW’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:305: error: (Each undeclared identifier is reported only once /home/druden/util/awesome-3.4/awesome.c:305: error: for each function it appears in.) /home/druden/util/awesome-3.4/awesome.c:306: error: ‘XCB_EVENT_ERROR_BAD_MATCH’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:308: error: ‘XCB_EVENT_ERROR_BAD_VALUE’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c: In function ‘main’: /home/druden/util/awesome-3.4/awesome.c:369: error: ‘awesome_t’ has no member named ‘keygrabber’ /home/druden/util/awesome-3.4/awesome.c:370: error: ‘awesome_t’ has no member named ‘mousegrabber’ /home/druden/util/awesome-3.4/awesome.c:376: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:377: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:381: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:382: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:424: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:431: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:432: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:433: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:434: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:435: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:436: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:443: error: ‘awesome_t’ has no member named ‘default_screen’ /home/druden/util/awesome-3.4/awesome.c:450: error: ‘awesome_t’ has no member named ‘have_xtest’ /home/druden/util/awesome-3.4/awesome.c:462: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:464: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:465: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:467: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:468: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:471: warning: implicit declaration of function ‘xcb_event_handlers_init’ /home/druden/util/awesome-3.4/awesome.c:471: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:472: warning: implicit declaration of function ‘xutil_error_handler_catch_all_set’ /home/druden/util/awesome-3.4/awesome.c:472: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:490: warning: implicit declaration of function ‘xcb_event_poll_for_event_loop’ /home/druden/util/awesome-3.4/awesome.c:490: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:493: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:496: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:507: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:510: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:513: error: ‘awesome_t’ has no member named ‘font’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘numlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘shiftlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘capslockmask’ /home/druden/util/awesome-3.4/awesome.c:521: error: ‘awesome_t’ has no member named ‘modeswitchmask’ /home/druden/util/awesome-3.4/awesome.c:563: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:572: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:575: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:576: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:577: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:578: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:579: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:580: error: ‘awesome_t’ has no member named ‘loop’ make[3]: *** [CMakeFiles/awesome.dir/awesome.c.o] Error 1 make[2]: *** [CMakeFiles/awesome.dir/all] Error 2 make[1]: *** [all] Error 2 make: *** [cmake-build] Error 2

  Read the article

• Building Awesome WM

  - by Dragan Chupacabrovic

  Hello, I am following these steps in order to build Awesome window manager on 10.04 I am building 3.4 while the tutorial is for 3.1 I installed all of the specified dependencies including cairo. EDIT I ran: sudo apt-get install libxcb-xtest0-dev libxcb-property1-dev libxdg-basedir-dev libstartup-notification0-dev and now it looks like I'm missing a library Please advise: awesome-3.4$ make Running cmake… -- cat - /bin/cat -- ln - /bin/ln -- grep - /bin/grep -- git - /usr/bin/git -- hostname - /bin/hostname -- gperf - /usr/bin/gperf -- asciidoc - /usr/bin/asciidoc -- xmlto - /usr/bin/xmlto -- gzip - /bin/gzip -- lua - /usr/bin/lua -- luadoc - /usr/bin/luadoc -- convert - /usr/bin/convert -- Configuring lib/naughty.lua -- Configuring lib/awful/tooltip.lua -- Configuring lib/awful/init.lua -- Configuring lib/awful/titlebar.lua -- Configuring lib/awful/key.lua -- Configuring lib/awful/mouse/init.lua -- Configuring lib/awful/mouse/finder.lua -- Configuring lib/awful/autofocus.lua -- Configuring lib/awful/screen.lua -- Configuring lib/awful/rules.lua -- Configuring lib/awful/widget/init.lua -- Configuring lib/awful/widget/taglist.lua -- Configuring lib/awful/widget/graph.lua -- Configuring lib/awful/widget/tasklist.lua -- Configuring lib/awful/widget/common.lua -- Configuring lib/awful/widget/prompt.lua -- Configuring lib/awful/widget/launcher.lua -- Configuring lib/awful/widget/button.lua -- Configuring lib/awful/widget/layoutbox.lua -- Configuring lib/awful/widget/layout/init.lua -- Configuring lib/awful/widget/layout/vertical.lua -- Configuring lib/awful/widget/layout/horizontal.lua -- Configuring lib/awful/widget/layout/default.lua -- Configuring lib/awful/widget/progressbar.lua -- Configuring lib/awful/widget/textclock.lua -- Configuring lib/awful/dbus.lua -- Configuring lib/awful/remote.lua -- Configuring lib/awful/client.lua -- Configuring lib/awful/prompt.lua -- Configuring lib/awful/completion.lua -- Configuring lib/awful/tag.lua -- Configuring lib/awful/util.lua -- Configuring lib/awful/button.lua -- Configuring lib/awful/menu.lua -- Configuring lib/awful/hooks.lua -- Configuring lib/awful/wibox.lua -- Configuring lib/awful/layout/init.lua -- Configuring lib/awful/layout/suit/init.lua -- Configuring lib/awful/layout/suit/floating.lua -- Configuring lib/awful/layout/suit/fair.lua -- Configuring lib/awful/layout/suit/spiral.lua -- Configuring lib/awful/layout/suit/magnifier.lua -- Configuring lib/awful/layout/suit/tile.lua -- Configuring lib/awful/layout/suit/max.lua -- Configuring lib/awful/placement.lua -- Configuring lib/awful/startup_notification.lua -- Configuring lib/beautiful.lua -- Configuring themes/zenburn//theme.lua -- Configuring themes/default//theme.lua -- Configuring themes/sky//theme.lua -- Configuring config.h -- Configuring awesomerc.lua -- Configuring awesome-version-internal.h -- Configuring awesome.doxygen -- Configuring done -- Generating done -- Build files have been written to: /home/druden/util/awesome-3.4/.build-vedroid-i486-linux-gnu-4.4.3 Running make Makefile… Building… [ 4%] Built target generated_sources [ 5%] Building C object CMakeFiles/awesome.dir/awesome.c.o In file included from /home/druden/util/awesome-3.4/spawn.h:25, from /home/druden/util/awesome-3.4/awesome.c:33: /home/druden/util/awesome-3.4/globalconf.h:57: error: expected specifier-qualifier-list before ‘xcb_event_handlers_t’ In file included from /home/druden/util/awesome-3.4/awesome.c:34: /home/druden/util/awesome-3.4/client.h: In function ‘client_stack’: /home/druden/util/awesome-3.4/client.h:212: error: ‘awesome_t’ has no member named ‘client_need_stack_refresh’ /home/druden/util/awesome-3.4/client.h: In function ‘client_raise’: /home/druden/util/awesome-3.4/client.h:227: error: ‘awesome_t’ has no member named ‘stack’ In file included from /home/druden/util/awesome-3.4/awesome.c:42: /home/druden/util/awesome-3.4/titlebar.h: In function ‘titlebar_update_geometry’: /home/druden/util/awesome-3.4/titlebar.h:150: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:151: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:152: error: ‘awesome_t’ has no member named ‘L’ In file included from /home/druden/util/awesome-3.4/awesome.c:47: /home/druden/util/awesome-3.4/common/xutil.h: In function ‘xutil_get_text_property_from_reply’: /home/druden/util/awesome-3.4/common/xutil.h:39: warning: ‘STRING’ is deprecated (declared at /usr/local/include/xcb/xcb_atom.h:83) /home/druden/util/awesome-3.4/common/xutil.h: At top level: /home/druden/util/awesome-3.4/common/xutil.h:60: error: expected ‘)’ before ‘*’ token /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_atexit’: /home/druden/util/awesome-3.4/awesome.c:65: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:68: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:73: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:76: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:77: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: warning: type defaults to ‘int’ in declaration of ‘c’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:91: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:92: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:96: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c: In function ‘a_xcb_check_cb’: /home/druden/util/awesome-3.4/awesome.c:223: warning: implicit declaration of function ‘xcb_event_handle’ /home/druden/util/awesome-3.4/awesome.c:223: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:230: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_restart’: /home/druden/util/awesome-3.4/awesome.c:277: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c: In function ‘xerror’: /home/druden/util/awesome-3.4/awesome.c:305: error: ‘XCB_EVENT_ERROR_BAD_WINDOW’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:305: error: (Each undeclared identifier is reported only once /home/druden/util/awesome-3.4/awesome.c:305: error: for each function it appears in.) /home/druden/util/awesome-3.4/awesome.c:306: error: ‘XCB_EVENT_ERROR_BAD_MATCH’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:308: error: ‘XCB_EVENT_ERROR_BAD_VALUE’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c: In function ‘main’: /home/druden/util/awesome-3.4/awesome.c:369: error: ‘awesome_t’ has no member named ‘keygrabber’ /home/druden/util/awesome-3.4/awesome.c:370: error: ‘awesome_t’ has no member named ‘mousegrabber’ /home/druden/util/awesome-3.4/awesome.c:376: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:377: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:381: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:382: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:424: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:431: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:432: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:433: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:434: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:435: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:436: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:443: error: ‘awesome_t’ has no member named ‘default_screen’ /home/druden/util/awesome-3.4/awesome.c:450: error: ‘awesome_t’ has no member named ‘have_xtest’ /home/druden/util/awesome-3.4/awesome.c:462: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:464: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:465: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:467: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:468: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:471: warning: implicit declaration of function ‘xcb_event_handlers_init’ /home/druden/util/awesome-3.4/awesome.c:471: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:472: warning: implicit declaration of function ‘xutil_error_handler_catch_all_set’ /home/druden/util/awesome-3.4/awesome.c:472: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:490: warning: implicit declaration of function ‘xcb_event_poll_for_event_loop’ /home/druden/util/awesome-3.4/awesome.c:490: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:493: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:496: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:507: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:510: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:513: error: ‘awesome_t’ has no member named ‘font’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘numlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘shiftlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘capslockmask’ /home/druden/util/awesome-3.4/awesome.c:521: error: ‘awesome_t’ has no member named ‘modeswitchmask’ /home/druden/util/awesome-3.4/awesome.c:563: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:572: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:575: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:576: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:577: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:578: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:579: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:580: error: ‘awesome_t’ has no member named ‘loop’ make[3]: * [CMakeFiles/awesome.dir/awesome.c.o] Error 1 make[2]: [CMakeFiles/awesome.dir/all] Error 2 make[1]: [all] Error 2 make: * [cmake-build] Error 2

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Spam Assassin on windows

  - by ebeworld

  I just installed spam assassin and run for its sample ham mail as spamassassin sample-nonspam.txt, but it ended up marking it as a spam. What configuration am i missing to change? Result of the check is: From: Keith Dawson To: [email protected] Subject: **SPAM** TBTF ping for 2001-04-20: Reviving Date: Fri, 20 Apr 2001 16:59:58 -0400 Message-Id: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on ebeworld-PC X-Spam-Level: **** X-Spam-Status: Yes, score=10.5 required=6.3 tests=DCC_CHECK,DIGEST_MULTIPLE, DNS_FROM_OPENWHOIS,RAZOR2_CF_RANGE_51_100,RAZOR2_CF_RANGE_E4_51_100, RAZOR2_CHECK shortcircuit=no autolearn=no version=3.2.3 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----------=_4BF17E8E.BF8E0000" This is a multi-part message in MIME format. ------------=_4BF17E8E.BF8E0000 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit This mail is probably spam. The original message has been attached intact in RFC 822 format. Content preview: -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t [...] Content analysis details: (10.5 points, 6.3 required) 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org. 1.5 RAZOR2_CF_RANGE_E4_51_100 Razor2 gives engine 4 confidence level above 50% [cf: 58] 2.5 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 58] 3.6 DCC_CHECK Listed in DCC (http://rhyolite.com/anti-spam/dcc/) 0.0 DIGEST_MULTIPLE Message hits more than one network digest check ------------=_4BF17E8E.BF8E0000 Content-Type: message/rfc822; x-spam-type=original Content-Description: original message before SpamAssassin Content-Disposition: inline Content-Transfer-Encoding: 8bit Return-Path: Delivered-To: [email protected] Received: from europe.std.com (europe.std.com [199.172.62.20]) by mail.netnoteinc.com (Postfix) with ESMTP id 392E1114061 for ; Fri, 20 Apr 2001 21:34:46 +0000 (Eire) Received: (from daemon@localhost) by europe.std.com (8.9.3/8.9.3) id RAA09630 for tbtf-outgoing; Fri, 20 Apr 2001 17:31:18 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA08749 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8278330 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: (from dawson@localhost) by world.std.com (8.9.3/8.9.3) id RAA26781 for [email protected]; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA07541 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8416421 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from [208.192.102.193] (ppp0c199.std.com [208.192.102.199]) by world.std.com (8.9.3/8.9.3) with ESMTP id RAA14226 for ; Fri, 20 Apr 2001 17:12:04 -0400 (EDT) Mime-Version: 1.0 Message-Id: Date: Fri, 20 Apr 2001 16:59:58 -0400 To: [email protected] From: Keith Dawson Subject: TBTF ping for 2001-04-20: Reviving Content-Type: text/plain; charset="us-ascii" Sender: [email protected] Precedence: list Reply-To: [email protected] -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t Timely news of the bellwethers in computer and communications technology that will affect electronic commerce -- since 1994 Your Host: Keith Dawson ISSN: 1524-9948 This issue: < http://tbtf.com/archive/2001-04-20.html > To comment on this issue, please use this forum at Quick Topic: < http://www.quicktopic.com/tbtf/H/kQGJR2TXL6H > ________________________________________________________________________ Q u o t e O f T h e M o m e n t Even organizations that promise "privacy for their customers" rarely if ever promise "continued privacy for their former customers..." Once you cancel your account with any business, their promises of keeping the information about their customers private no longer apply... you're not a customer any longer. This is in the large category of business behaviors that individuals would consider immoral and deceptive -- and businesses know are not illegal. -- "_ankh," writing on the XNStalk mailing list ________________________________________________________________________ ..TBTF's long hiatus is drawing to a close Hail subscribers to the TBTF mailing list. Some 2,000 [1] of you have signed up since the last issue [2] was mailed on 2000-07-20. This brief note is the first of several I will send to this list to excise the dead addresses prior to resuming regular publication. While you time the contractions of the newsletter's rebirth, I in- vite you to read the TBTF Log [3] and sign up for its separate free subscription. Send "subscribe" (no quotes) with any subject to [email protected] . I mail out collected Log items on Sun- days. If you need to stay more immediately on top of breaking stories, pick up the TBTF Log's syndication file [4] or read an aggregator that does. Examples are Slashdot's Cheesy Portal [5], Userland [6], and Sitescooper [7]. If your news obsession runs even deeper and you own an SMS-capable cell phone or PDA, sign up on TBTF's WebWire- lessNow portal [8]. A free call will bring you the latest TBTF Log headline, Jargon Scout [9] find, or Siliconium [10]. Two new columnists have bloomed on TBTF since last summer: Ted By- field's roving_reporter [11] and Gary Stock's UnBlinking [12]. Late- ly Byfield has been writing in unmatched depth about ICANN, but the roving_reporter nym's roots are in commentary at the intersection of technology and culture. Stock's UnBlinking latches onto topical sub- jects and pursues them to the ends of the Net. These writers' voices are compelling and utterly distinctive. [1] http://tbtf.com/growth.html [2] http://tbtf.com/archive/2000-07-20.html [3] http://tbtf.com/blog/ [4] http://tbtf.com/tbtf.rdf [5] http://www.slashdot.org/cheesyportal.shtml [6] http://my.userland.com/ [7] http://www.sitescooper.org/ [8] http://tbtf.com/pull-wwn/ [9] http://tbtf.com/jargon-scout.html [10] http://tbtf.com/siliconia.html [11] http://tbtf.com/roving_reporter/ [12] http://tbtf.com/unblinking/ ________________________________________________________________________ S o u r c e s For a complete list of TBTF's email and Web sources, see http://tbtf.com/sources.html . ________________________________________ B e n e f a c t o r s TBTF is free. If you get value from this publication, please visit the TBTF Benefactors page < http://tbtf.com/the-benefactors.html > and consider contributing to its upkeep. ________________________________________________________________________ TBTF home and archive at http://tbtf.com/ . To unsubscribe send the message "unsubscribe" to [email protected]. TBTF is Copy- right 1994-2000 by Keith Dawson, <[email protected]>. Commercial use prohibited. For non-commercial purposes please forward, post, and link as you see fit. _______________________________________________ Keith Dawson [email protected] Layer of ash separates morning and evening milk. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.2 for non-commercial use http://www.pgp.com iQCVAwUBOuCi3WAMawgf2iXRAQHeAQQA3YSePSQ0XzdHZUVskFDkTfpE9XS4fHQs WaT6a8qLZK9PdNcoz3zggM/Jnjdx6CJqNzxPEtxk9B2DoGll/C/60HWNPN+VujDu Xav65S0P+Px4knaQcCIeCamQJ7uGcsw+CqMpNbxWYaTYmjAfkbKH1EuLC2VRwdmD wQmwrDp70v8= =8hLB -----END PGP SIGNATURE----- ------------=_4BF17E8E.BF8E0000--

  Read the article

• webserver horrible slow, sometimes incredible fast

  - by dhanke

  i am running a small community ( 6000+ Members ) on a non-virtual 64-bit ubuntu 11.04 system. I am not a Linux-pro, not even advanced, i just tried to setup a webserver, which does nothing special actually. Delivering some dynamic PHP and RoR websites is its task. So it might be that my configuration files do look horrible bad. Also, i might use the wrong vocabulary, so in doubt, please ask. Having a current all-time record of 520 registered users (board-accounts, no system-users) online at same time, average server-load is about 2.0 - 5.0. Meantime (~250 users) average server load value is at about 0.4 - 0.8, sometimes, on some expensive searches a bit higher. everything fine. From time to time however, the load increases up to 120 (120.0, not 12.0 ;) ). In this time, its hard to even connect via SSH, but when i reach the server, and use top/htop/iotop to see whats happening, i cannot identify any process causing high CPU load. iotop tells me about a current reading/writing speed of about approx. 70kb/s, which is quite equal to power-off i think. Memory-Usage is max. at ~ 12GB of 16GB, so swap remains empty. now the odd (at least for me:) waiting some minutes ( since i always get a bit into a panic when this happens, it feels like 5 minutes, but i suppose its more like 20-30 minutes) and the server is back to normal. everything continues as normal. another odd fact: when i run hdparm -tT /dev/sda, i get answer like: /dev/sda: Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec when i run the same command while the server is "frozen", the answer is like /dev/sda: <- takes about 5 minutes until this line appears Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec <- 5 more minutes Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec <- another 5 minutes so the values are the same, but the quoted time is completely wrong. using time command as prefix also tells me that ~ 15 minutes were used. I searched in dmesg, /var/log/[messages|syslog] - nothing found. /var/log/errors however tells me that: Jul 4 20:28:30 localhost kernel: [19080.671415] INFO: task php5-fpm:27728 blocked for more than 120 seconds. Jul 4 20:28:30 localhost kernel: [19080.671419] "echo 0 /proc/sys/kernel/hung_task_timeout_secs" disables this message. multiple times. now that message does tell me that php5-fpm task was blocked or did block ? - but not if that is the cause or just one of the results of that "freeze". Anyone? to cut the long story short, i dont know where even to start analyzing. So if you can give me any advice by looking at following specs and configs, or ask me to provide more information, i`d be glad. Specs: 6 Core AMD Phenom(tm) II X6 1055T Processor * 16 Gigabyte Ram 2x 1.5 TB Seagate ST1500DL003-9VT16L via SATA 3 via SoftwareRaid (i suppose) Services: (due to service --status-all, those with [ + ]) nginx Webserver 1.0.14 mySQL 5.1.63 Server Ruby on Rails 2.3.11 ( passenger-nginx-module ) php5-fpm 5.3.6-13ubuntu3.7 SSH ido2db Further services: default crontab + nightly backup. syslog-ng Website consists of 2 subdomains, forum. and www. where forum is a phpBB3.x PHP-Board, and www a Ruby on Rails 2.3.11 application (portal). Mini-Note: sometimes i notice that the forum is pretty slow, in contrast to the always-fast (except for this "freeze") portal. Both share the same Database, but the portal is using it read-only. The Webserver is nginx, using phusion passenger module to communicate with the ruby-application. Also, for the forum it communicates with php5-fpm via socket: relevant nginx configuration parts ( with comments/questions starting by ; ) ; in case of freeze due to too high Filesystem activity, maybe adding a limit? #worker_rlimit_nofile 50000; user www-data; ; 6 cores, so i read 6 fits. maybe already wrong? worker_processes 6; pid /var/run/nginx.pid; events { worker_connections 1024; } http { passenger_root /var/lib/gems/1.8/gems/passenger-3.0.11; passenger_ruby /usr/bin/ruby1.8; ; the forum once featured a chat, which was working w/o websockets. ; so it was a hell of pull requests (deactivated now, freeze still happening) keepalive_timeout 65; keepalive_requests 50; gzip on; server { listen 80; server_name www.domain.tld; root /var/www/domain/rails/public; passenger_enabled on; } server { listen 80; server_name forum.domain.tld; location / { root /var/www/domain/forum; index index.php; } ; satic stuff to be handled by nginx location ~* ^/style/.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /var/www/domain/forum/; } ; now the php magic, note the "backend"-fcgi_pass location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/domain/forum$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; } location ~ /\.ht { deny all; } } ;the php5-fpm socket. i read that /dev/shm/ whould be the fastes place for this. bad idea in general? upstream backend { server unix:/dev/shm/phpfpm; } ... } php5-fpm settings (i changed this values due to php5-fpm error log messages higher and higher.. (freeze-problem was there before as well)* listen = /dev/shm/phpfpm user = www-data group = www-data pm = dynamic ; holy, 4000! well, shinking this value to earth-level gave me ; 100s of 502 bad gateway commands. this values were quite stable. ; since there are only max 520 users online i dont get it, why i would need ; as many children as configured here. due to keep-alive maybe? ; asking questions is easier for me since restarting server will make ; my community-members angry ;) pm.max_children = 4000 pm.start_servers = 100 pm.min_spare_servers = 50 pm.max_spare_servers = 150 pm.max_requests = 10 pm.status_path = /status ping.path = /ping ping.response = pong slowlog = log/$pool.log.slow ;should i use rlimit? ;rlimit_files = 1024 chdir = / mysql/my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP ; high number, but less gives some phpBB errors. max_connections = 450 table_cache = 512 ; i read twice the cpu cores, bad? thread_concurrency = 12 join_buffer_size = 2084K concurrent_insert = 3 query_cache_limit = 64M query_cache_size = 512M query_cache_type = 1 log_error = /var/log/mysql/error.log log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 expire_logs_days = 10 max_binlog_size = 100M low_priority_updates=1 [mysqldump] quick quote-names max_allowed_packet = 16M [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/ I used smartctl already, hdds seem to be fine. /proc/mdstatus quotes: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sda3[1] 1459264192 blocks [2/1] [_U] md1 : active raid1 sda1[0] 3911680 blocks [2/1] [U_] unused devices: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127727 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 127727 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited I quote some questions in my configuration files, these are not (intentional) directly problem-related, but would be nice for me to know wether they are indeed questionable or done right. One additional Fact: my MYSQL-database is at 12GB size. i dont know if that does matter, but mytop sometimes shows me 4-5 seconds long insert queries, some are 20-30 seconds long. Its just a feeling that i am unable to prove (because i dont know how), but when i disable the database, the freeze seems not to happen. Example: i created a dummy rails application to see the development log. the app made some sql-queries, reads and inserts. the log quite often was like: DbTest Load (0.3ms) SELECT * FROM `db_test` WHERE (`db_test`.`id` = 31722) LIMIT 1 SQL (0.1ms) BEGIN DbTest Update (0.3ms) UPDATE `db_test` SET `updated_at` = '2012-07-04 23:32:34' WHERE `id` = 31722 - now the log stands still for 5-60 seconds. SQL (49.1ms) COMMIT - SQL-Update time in the log does not include freeze time Rendering test/index Completed in 96ms (View: 16, DB: 59) | 200 OK [http://localhost:9000/test] Bad part is: this mini-freeze here only happens from time to time as well. note: meanwhile i cannot even upload files via scp. I currently feel like running form bad to worse and back by googling for my server-problem due to immense lack of knowledge regarding server configurations. It still makes me wonder, why those problems even appear, since 250 users a time is not such a high amount, right? So my questions: whats wrong and how to fix? ;) or: what information can i provide to make the situation more clear? can you point at some critical bad configuration-line which i should consider to catch up in the documentation? are there any tools i can run to see some possible bottlenecks? any further advice? (next to: "pay someone who knows what he does" - its a private project, server costs enough already. :)) Thanks for your time and help. Best Regards, Daniel P.S.: i renamed the configfiles to domain.tld since i dont want to have any % more load to the server until its fixed. might be a exaggeratedly thought.. P.P.S: if i asked a complete duplicate question, sorry. my search results seemed to be quite specific in their own way.

  Read the article

• Network Logon Issues with Group Policy and Network

  - by bobloki

  I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

  Read the article

• I need advices: small memory footprint linux mail server with spam filtering

  - by petermolnar

  I have a VPS which is originally destined to be a webserver but some minimal mail capabilities are needed to be deployed as well, including sending and receiving as standalone server. The current setup is the following: Postfix reveices the mail, the users are in virtual tables, stored in MySQL on connection all servers are tested with policyd-weight service against some DNSBLs all mail is runs through SpamAssassin spamd with the help of spamc client the mail is then delivered with Dovecot 2' LDA (local delivery agent), virtual users as well As you saw... there's no virus scanner running, and that's for a reason: clamav eats all the memory possible and also, virus mails are all filtered out with this setup (I've tested the same with ClamAV enabled for 1,5 years, no virus mail ever got even to ClamAV) I don't use amavisd and I really don't want to. You only need that monster if you have plenty of memory and lots of simultaneous scanners. It's also a nightmare to fine tune by hand. I run policyd-weight instead of policyd and native DNSBLs in postfix. I don't like to send someone away because a single service listed them. Important statement: everything works fine. I receive very small amount of spam, nearly never get a false positive and most of the bad mail is stopped by policyd-weight. The only "problem" that I feel the services at total uses a bit much memory alltogether. I've already cut the modules of spamassassin (see below), but I'd really like to hear some advices how to cut the memory footprint as low as possible, mostly: what plugins SpamAssassin really needs and what are more or less useless, regarding to my current postfix & policyd-weight setup? SpamAssassin rules are also compiled with sa-compile (sa-update runs once a week from cron, compile runs right after that) These are some of the current configurations that may matter, please tell me if you need anything more. postfix/master.cf (parts only) dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/bin/spamc -e /usr/lib/dovecot/deliver -d ${recipient} -f {sender} postfix/main.cf (parts only) smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_invalid_hostname, reject_non_fqdn_hostname, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_pipelining, reject_unauth_destination, check_policy_service inet:127.0.0.1:12525, permit policyd-weight.conf (parts only) $REJECTMSG = "550 Mail appeared to be SPAM or forged. Ask your Mail/DNS-Administrator to correct HELO and DNS MX settings or to get removed from DNSBLs"; $REJECTLEVEL = 4; $DEFER_STRING = 'IN_SPAMCOP= BOGUS_MX='; $DEFER_ACTION = '450'; $DEFER_LEVEL = 5; $DNSERRMSG = '450 No DNS entries for your MTA, HELO and Domain. Contact YOUR administrator'; # 1: ON, 0: OFF (default) # If ON request that ALL clients are only checked against RBLs $dnsbl_checks_only = 0; # 1: ON (default), 0: OFF # When set to ON it logs only RBLs which affect scoring (positive or negative) $LOG_BAD_RBL_ONLY = 1; ## DNSBL settings @dnsbl_score = ( # host, hit, miss, log name 'dnsbl.ahbl.org', 3, -1, 'dnsbl.ahbl.org', 'dnsbl.njabl.org', 3, -1, 'dnsbl.njabl.org', 'dnsbl.sorbs.net', 3, -1, 'dnsbl.sorbs.net', 'bl.spamcop.net', 3, -1, 'bl.spamcop.net', 'zen.spamhaus.org', 3, -1, 'zen.spamhaus.org', 'pbl.spamhaus.org', 3, -1, 'pbl.spamhaus.org', 'cbl.abuseat.org', 3, -1, 'cbl.abuseat.org', 'list.dsbl.org', 3, -1, 'list.dsbl.org', ); # If Client IP is listed in MORE DNSBLS than this var, it gets REJECTed immediately $MAXDNSBLHITS = 3; # alternatively, if the score of DNSBLs is ABOVE this level, reject immediately $MAXDNSBLSCORE = 9; $MAXDNSBLMSG = '550 Az levelezoszerveruk IP cime tul sok spamlistan talahato, kerjuk ellenorizze! / Your MTA is listed in too many DNSBLs; please check.'; ## RHSBL settings @rhsbl_score = ( 'multi.surbl.org', 4, 0, 'multi.surbl.org', 'rhsbl.ahbl.org', 4, 0, 'rhsbl.ahbl.org', 'dsn.rfc-ignorant.org', 4, 0, 'dsn.rfc-ignorant.org', # 'postmaster.rfc-ignorant.org', 0.1, 0, 'postmaster.rfc-ignorant.org', # 'abuse.rfc-ignorant.org', 0.1, 0, 'abuse.rfc-ignorant.org' ); # skip a RBL if this RBL had this many continuous errors $BL_ERROR_SKIP = 2; # skip a RBL for that many times $BL_SKIP_RELEASE = 10; ## cache stuff # must be a directory (add trailing slash) $LOCKPATH = '/var/run/policyd-weight/'; # socket path for the cache daemon. $SPATH = $LOCKPATH.'/polw.sock'; # how many seconds the cache may be idle before starting maintenance routines #NOTE: standard maintenance jobs happen regardless of this setting. $MAXIDLECACHE = 60; # after this number of requests do following maintenance jobs: checking for config changes $MAINTENANCE_LEVEL = 5; # negative (i.e. SPAM) result cache settings ################################## # set to 0 to disable caching for spam results. To this level the cache will be cleaned. $CACHESIZE = 2000; # at this number of entries cleanup takes place $CACHEMAXSIZE = 4000; $CACHEREJECTMSG = '550 temporarily blocked because of previous errors'; # after NTTL retries the cache entry is deleted $NTTL = 1; # client MUST NOT retry within this seconds in order to decrease TTL counter $NTIME = 30; # positve (i.,e. HAM) result cache settings ################################### # set to 0 to disable caching of HAM. To this number of entries the cache will be cleaned $POSCACHESIZE = 1000; # at this number of entries cleanup takes place $POSCACHEMAXSIZE = 2000; $POSCACHEMSG = 'using cached result'; #after PTTL requests the HAM entry must succeed one time the RBL checks again $PTTL = 60; # after $PTIME in HAM Cache the client must pass one time the RBL checks again. #Values must be nonfractal. Accepted time-units: s, m, h, d $PTIME = '3h'; # The client must pass this time the RBL checks in order to be listed as hard-HAM # After this time the client will pass immediately for PTTL within PTIME $TEMP_PTIME = '1d'; ## DNS settings # Retries for ONE DNS-Lookup $DNS_RETRIES = 1; # Retry-interval for ONE DNS-Lookup $DNS_RETRY_IVAL = 5; # max error count for unresponded queries in a complete policy query $MAXDNSERR = 3; $MAXDNSERRMSG = 'passed - too many local DNS-errors'; # persistent udp connection for DNS queries. #broken in Net::DNS version 0.51. Works with Net::DNS 0.53; DEFAULT: off $PUDP= 0; # Force the usage of Net::DNS for RBL lookups. # Normally policyd-weight tries to use a faster RBL lookup routine instead of Net::DNS $USE_NET_DNS = 0; # A list of space separated NS IPs # This overrides resolv.conf settings # Example: $NS = '1.2.3.4 1.2.3.5'; # DEFAULT: empty $NS = ''; # timeout for receiving from cache instance $IPC_TIMEOUT = 2; # If set to 1 policyd-weight closes connections to smtpd clients in order to avoid too many #established connections to one policyd-weight child $TRY_BALANCE = 0; # scores for checks, WARNING: they may manipulate eachother # or be factors for other scores. # HIT score, MISS Score @client_ip_eq_helo_score = (1.5, -1.25 ); @helo_score = (1.5, -2 ); @helo_score = (0, -2 ); @helo_from_mx_eq_ip_score= (1.5, -3.1 ); @helo_numeric_score= (2.5, 0 ); @from_match_regex_verified_helo= (1,-2 ); @from_match_regex_unverified_helo = (1.6, -1.5 ); @from_match_regex_failed_helo = (2.5, 0 ); @helo_seems_dialup = (1.5, 0 ); @failed_helo_seems_dialup= (2, 0 ); @helo_ip_in_client_subnet= (0,-1.2 ); @helo_ip_in_cl16_subnet = (0,-0.41 ); #@client_seems_dialup_score = (3.75, 0 ); @client_seems_dialup_score = (0, 0 ); @from_multiparted = (1.09, 0 ); @from_anon= (1.17, 0 ); @bogus_mx_score = (2.1, 0 ); @random_sender_score = (0.25, 0 ); @rhsbl_penalty_score = (3.1, 0 ); @enforce_dyndns_score = (3, 0 ); spamassassin/init.pre (I've put the .pre files together) loadplugin Mail::SpamAssassin::Plugin::Hashcash loadplugin Mail::SpamAssassin::Plugin::SPF loadplugin Mail::SpamAssassin::Plugin::Pyzor loadplugin Mail::SpamAssassin::Plugin::Razor2 loadplugin Mail::SpamAssassin::Plugin::AutoLearnThreshold loadplugin Mail::SpamAssassin::Plugin::MIMEHeader loadplugin Mail::SpamAssassin::Plugin::ReplaceTags loadplugin Mail::SpamAssassin::Plugin::Check loadplugin Mail::SpamAssassin::Plugin::HTTPSMismatch loadplugin Mail::SpamAssassin::Plugin::URIDetail loadplugin Mail::SpamAssassin::Plugin::Bayes loadplugin Mail::SpamAssassin::Plugin::BodyEval loadplugin Mail::SpamAssassin::Plugin::DNSEval loadplugin Mail::SpamAssassin::Plugin::HTMLEval loadplugin Mail::SpamAssassin::Plugin::HeaderEval loadplugin Mail::SpamAssassin::Plugin::MIMEEval loadplugin Mail::SpamAssassin::Plugin::RelayEval loadplugin Mail::SpamAssassin::Plugin::URIEval loadplugin Mail::SpamAssassin::Plugin::WLBLEval loadplugin Mail::SpamAssassin::Plugin::VBounce loadplugin Mail::SpamAssassin::Plugin::Rule2XSBody spamassassin/local.cf (parts) use_bayes 1 bayes_auto_learn 1 bayes_store_module Mail::SpamAssassin::BayesStore::MySQL bayes_sql_dsn DBI:mysql:db:127.0.0.1:3306 bayes_sql_username user bayes_sql_password pass bayes_ignore_header X-Bogosity bayes_ignore_header X-Spam-Flag bayes_ignore_header X-Spam-Status ### User settings user_scores_dsn DBI:mysql:db:127.0.0.1:3306 user_scores_sql_password user user_scores_sql_username pass user_scores_sql_custom_query SELECT preference, value FROM _TABLE_ WHERE username = _USERNAME_ OR username = '$GLOBAL' OR username = CONCAT('%',_DOMAIN_) ORDER BY username ASC # for better speed score DNS_FROM_AHBL_RHSBL 0 score __RFC_IGNORANT_ENVFROM 0 score DNS_FROM_RFC_DSN 0 score DNS_FROM_RFC_BOGUSMX 0 score __DNS_FROM_RFC_POST 0 score __DNS_FROM_RFC_ABUSE 0 score __DNS_FROM_RFC_WHOIS 0 UPDATE 01 As adaptr advised I remove policyd-weight and configured postfix postscreen, this resulted approximately -15-20 MB from RAM usage and a lot faster work. I'm not sure it's working at full capacity but it seems promising.

  Read the article

• Does anyone really understand how HFSC scheduling in Linux/BSD works?

  - by Mecki

  I read the original SIGCOMM '97 PostScript paper about HFSC, it is very technically, but I understand the basic concept. Instead of giving a linear service curve (as with pretty much every other scheduling algorithm), you can specify a convex or concave service curve and thus it is possible to decouple bandwidth and delay. However, even though this paper mentions to kind of scheduling algorithms being used (real-time and link-share), it always only mentions ONE curve per scheduling class (the decoupling is done by specifying this curve, only one curve is needed for that). Now HFSC has been implemented for BSD (OpenBSD, FreeBSD, etc.) using the ALTQ scheduling framework and it has been implemented Linux using the TC scheduling framework (part of iproute2). Both implementations added two additional service curves, that were NOT in the original paper! A real-time service curve and an upper-limit service curve. Again, please note that the original paper mentions two scheduling algorithms (real-time and link-share), but in that paper both work with one single service curve. There never have been two independent service curves for either one as you currently find in BSD and Linux. Even worse, some version of ALTQ seems to add an additional queue priority to HSFC (there is no such thing as priority in the original paper either). I found several BSD HowTo's mentioning this priority setting (even though the man page of the latest ALTQ release knows no such parameter for HSFC, so officially it does not even exist). This all makes the HFSC scheduling even more complex than the algorithm described in the original paper and there are tons of tutorials on the Internet that often contradict each other, one claiming the opposite of the other one. This is probably the main reason why nobody really seems to understand how HFSC scheduling really works. Before I can ask my questions, we need a sample setup of some kind. I'll use a very simple one as seen in the image below: Here are some questions I cannot answer because the tutorials contradict each other: What for do I need a real-time curve at all? Assuming A1, A2, B1, B2 are all 128 kbit/s link-share (no real-time curve for either one), then each of those will get 128 kbit/s if the root has 512 kbit/s to distribute (and A and B are both 256 kbit/s of course), right? Why would I additionally give A1 and B1 a real-time curve with 128 kbit/s? What would this be good for? To give those two a higher priority? According to original paper I can give them a higher priority by using a curve, that's what HFSC is all about after all. By giving both classes a curve of [256kbit/s 20ms 128kbit/s] both have twice the priority than A2 and B2 automatically (still only getting 128 kbit/s on average) Does the real-time bandwidth count towards the link-share bandwidth? E.g. if A1 and B1 both only have 64kbit/s real-time and 64kbit/s link-share bandwidth, does that mean once they are served 64kbit/s via real-time, their link-share requirement is satisfied as well (they might get excess bandwidth, but lets ignore that for a second) or does that mean they get another 64 kbit/s via link-share? So does each class has a bandwidth "requirement" of real-time plus link-share? Or does a class only have a higher requirement than the real-time curve if the link-share curve is higher than the real-time curve (current link-share requirement equals specified link-share requirement minus real-time bandwidth already provided to this class)? Is upper limit curve applied to real-time as well, only to link-share, or maybe to both? Some tutorials say one way, some say the other way. Some even claim upper-limit is the maximum for real-time bandwidth + link-share bandwidth? What is the truth? Assuming A2 and B2 are both 128 kbit/s, does it make any difference if A1 and B1 are 128 kbit/s link-share only, or 64 kbit/s real-time and 128 kbit/s link-share, and if so, what difference? If I use the seperate real-time curve to increase priorities of classes, why would I need "curves" at all? Why is not real-time a flat value and link-share also a flat value? Why are both curves? The need for curves is clear in the original paper, because there is only one attribute of that kind per class. But now, having three attributes (real-time, link-share, and upper-limit) what for do I still need curves on each one? Why would I want the curves shape (not average bandwidth, but their slopes) to be different for real-time and link-share traffic? According to the little documentation available, real-time curve values are totally ignored for inner classes (class A and B), they are only applied to leaf classes (A1, A2, B1, B2). If that is true, why does the ALTQ HFSC sample configuration (search for 3.3 Sample configuration) set real-time curves on inner classes and claims that those set the guaranteed rate of those inner classes? Isn't that completely pointless? (note: pshare sets the link-share curve in ALTQ and grate the real-time curve; you can see this in the paragraph above the sample configuration). Some tutorials say the sum of all real-time curves may not be higher than 80% of the line speed, others say it must not be higher than 70% of the line speed. Which one is right or are they maybe both wrong? One tutorial said you shall forget all the theory. No matter how things really work (schedulers and bandwidth distribution), imagine the three curves according to the following "simplified mind model": real-time is the guaranteed bandwidth that this class will always get. link-share is the bandwidth that this class wants to become fully satisfied, but satisfaction cannot be guaranteed. In case there is excess bandwidth, the class might even get offered more bandwidth than necessary to become satisfied, but it may never use more than upper-limit says. For all this to work, the sum of all real-time bandwidths may not be above xx% of the line speed (see question above, the percentage varies). Question: Is this more or less accurate or a total misunderstanding of HSFC? And if assumption above is really accurate, where is prioritization in that model? E.g. every class might have a real-time bandwidth (guaranteed), a link-share bandwidth (not guaranteed) and an maybe an upper-limit, but still some classes have higher priority needs than other classes. In that case I must still prioritize somehow, even among real-time traffic of those classes. Would I prioritize by the slope of the curves? And if so, which curve? The real-time curve? The link-share curve? The upper-limit curve? All of them? Would I give all of them the same slope or each a different one and how to find out the right slope? I still haven't lost hope that there exists at least a hand full of people in this world that really understood HFSC and are able to answer all these questions accurately. And doing so without contradicting each other in the answers would be really nice ;-)

  Read the article

• Users using Perl script to bypass Squid Proxy

  - by mk22

  The users on our network have been using a perl script to bypass our Squid proxy restrictions. Is there any way we can block this script from working?? #!/usr/bin/perl ######################################################################## # (c) 2008 Indika Bandara Udagedara # [email protected] # http://indikabandara19.blogspot.com # # ---------- # LICENCE # ---------- # This work is protected under GNU GPL # It simply says # " you are hereby granted to do whatever you want with this # except claiming you wrote this." # # # ---------- # README # ---------- # A simple tool to download via http proxies which enforce a download # size limit. Requires curl. # This is NOT a hack. This uses the absolutely legal HTTP/1.1 spec # Tested only for squid-2.6. Only squids will work with this(i think) # Please read the verbose README provided kindly by Rahadian Pratama # if u r on cygwin and think this documentation is not enough :) # # The newest version of pget is available at # http://indikabandara.no-ip.com/~indika/pget # # ---------- # USAGE # ---------- # + Edit below configurations(mainly proxy) # + First run with -i <file> giving a sample file of same type that # you are going to download. Doing this once is enough. # eg. to download '.tar' files first run with # pget -i my.tar ('my.tar' should be a real file) # + Run with # pget -g <URL> # # ######################################################################## ######################################################################## # CONFIGURATIONS - CHANGE THESE FREELY ######################################################################## # *magic* file # pls set absolute path if in cygwin my $_extFile = "./pget.ext" ; # download in chunks of below size my $_chunkSize = 1024*1024; # in Bytes # the proxy that troubles you my $_proxy = "192.168.0.2:3128"; # proxy URL:port my $_proxy_auth = "user:pass"; # proxy user:pass # whereis curl # pls set absolute path if in cygwin my $_curl = "/usr/bin/curl"; ######################################################################## # EDIT BELOW ONLY IF YOU KNOW WHAT YOU ARE DOING ######################################################################## use warnings; my $_version = "0.1.0"; PrintBanner(); if (@ARGV == 0) { PrintHelp(); exit; } PrimaryValidations(); my $val; while(scalar(@ARGV)) { my $arg = shift(@ARGV); if($arg eq '-h') { PrintHelp(); } elsif($arg eq '-i') { $val = shift(@ARGV); if (!defined($val)) { printf("-i option requires a filename\n"); exit; } Init($val); } elsif($arg eq '-g') { $val = shift(@ARGV); if (!defined($val)) { printf("-g option requires a URL\n"); exit; } GetURL($val); } elsif($arg eq '-c') { $val = shift(@ARGV); if (!defined($val)) { printf("-c option requires a URL\n"); exit; } ContinueURL($val); } else { printf ("Unknown option %s\n", $arg); PrintHelp(); } } sub GetURL { my ($URL) = @_; chomp($URL); my $fileName = GetFileName($URL); my %mapExt; my $first; my $readLen; my $ext = GetExt($fileName); ReadMap($_extFile, \%mapExt); if ( exists($mapExt{$ext})) { $first = $mapExt{$ext}; GetFile($URL, $first, $fileName, 0); } else { die "Unknown ext in $fileName. Rerun with -i <fileName>"; } } sub ContinueURL { my ($URL) = @_; chomp($URL); my $fileName = GetFileName($URL); my $fileSize = 0; $fileSize = -s $fileName; printf("Size = %d\n", $fileSize); my $first = -1; if ( $fileSize > 0 ) { $fileSize -= 1; GetFile($URL, $first, $fileName, $fileSize); } else { GetURL($URL); } } sub Init { my ($fileName) = @_; my ($key, $value); my %mapExt; my $ext = GetExt($fileName); if ( $ext eq "") { die "Cannot get ext of \'$fileName\'"; } ReadMap($_extFile, \%mapExt); my $b = GetFirst($fileName); $mapExt{$ext} = $b; WriteMap($_extFile, \%mapExt); print "I handle\n"; while ( ($key, $value) = each(%mapExt) ) { print "\t$key -> $value\n"; } } sub GetExt { my ($name) = @_; my @x = split(/\./, $name); my $ext = ""; if (@x != 1) { $ext = pop @x; } return $ext; } sub ReadMap { my($fileName, $mapRef) = @_; my $f; my @arr; open($f, '<', $fileName) or die "Couldn't open $fileName"; my %map = %{$mapRef}; while (<$f>) { my $line = $_; chomp($line); @arr = split(/[ \t]+/, $line, 2); $mapRef->{ $arr[0]} = $arr[1]; } printf("known ext\n"); while (($key, $value) = each(%$mapRef)) { print("$key, $value\n"); } close($f); } sub WriteMap { my ($fileName, $mapRef) = @_; my $f; my @arr; open($f, '>', $fileName) or die "Couldn't open $fileName"; my ($k, $v); while( ($k, $v) = each(%{$mapRef})) { print $f "$k" . "\t$v\n"; } close($f); } sub PrintHelp { print "usage: -h Print this help -i <filename> Initialize for this filetype -g <URL> Get this URL\n -c <URL> Continue this URL\n" } sub GetFirst { my ($fileName) = @_; my $f; open($f, "<$fileName") or die "Couldn't open $fileName"; my $buffer = ""; my $first = -1; binmode($f); sysread($f, $buffer, 1, 0); close($f); $first = ord($buffer); return $first; } sub GetFirstFromMap { } sub GetFileName { my ($URL) = @_; my @x = split(/\//, $URL); my $fileName = pop @x; return $fileName; } sub GetChunk { my ($URL, $file, $offset, $readLen) = @_; my $end = $offset + $_chunkSize - 1; my $curlCmd = "$_curl -x $_proxy -u $_proxy_auth -r $offset-$end -# \"$URL\""; print "$curlCmd\n"; my $buff = `$curlCmd`; ${$readLen} = syswrite($file, $buff, length($buff)); } sub GetFile { my ($URL, $first, $outFile, $fileSize) = @_; my $readLen = 0; my $start = $fileSize + 1; my $file; open($file, "+>>$outFile") or die "Couldn't open $outFile to write"; if ($fileSize <= 0) { my $uc = pack("C", $first); syswrite ($file, $uc, 1); } do { GetChunk($URL, $file, $start ,\$readLen); $start = $start + $_chunkSize; $fileSize += $readLen; }while ($readLen == $_chunkSize); printf("Downloaded %s(%d bytes).\n", $outFile, $fileSize); close($file); } sub PrintBanner { printf ("pget version %s\n", $_version); printf ("There is absolutely NO WARRANTY for pget.\n"); printf ("Use at your own risk. You have been warned.\n\n"); } sub PrimaryValidations { unless( -e "$_curl") { printf("ERROR:curl is not at %s. Pls install or provide correct path.\n", $_curl); exit; } unless( -e "$_extFile") { printf("extFile is not at %s. Creating one\n", $_extFile); `touch $_extFile`; } if ( $_chunkSize <= 0) { printf ("Invalid chunk size. Using 1Mb as default.\n"); $_chunkSize = 1024*1024; } }

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Sendmail to local domain ignoring MX records (part 2)

  - by FractalizeR

  Hello. I have the exact problem, like in this post: http://serverfault.com/questions/25068/sendmail-to-local-domain-ignoring-mx-records I am also using email provider like GMail For Your Domain (which stores your mail and manages it). I am sending mail from my server directly, but receiving mail is done via Yandex (email provider). Since the server hosts forum, I prefer to send mail directly from it because using another mail provider can slow things. Also, when I send 300.000 emails to my subscribers, email provider will surely block me thinking I send spam. My DNS zone now is: ; ; GSMFORUM.RU ; $TTL 1H gsmforum.ru. SOA ns1.hc.ru. support.hc.ru. ( 2009122268 ; Serial 1H ; Refresh 30M ; Retry 1W ; Expire 1H ) ; Minimum gsmforum.ru. NS ns1.hc.ru. gsmforum.ru. NS ns2.hc.ru. @ A 79.174.68.223 *.gsmforum.ru. CNAME @ ns1 A 79.174.68.223 ns2 A 79.174.68.224 @ MX 10 mx.yandex.ru. mail CNAME domain.mail.yandex.net. yamail-xxxxxxxxx CNAME mail.yandex.ru. Server hostname is server.gsmforum.ru. May be this is the cause? Can someone explain the reason of the matter (the rules that make sendmail consider domain to be local)? Can I easily change *.gsmforum.ru. CNAME @ into *.gsmforum.ru. A 79.174.68.224 to solve this problem? [root@server ~]# cat /etc/mail/local-host-names localhost localhost.localdomain This server hosts gsmforum.ru so I cannot put it into another domain like David Mackintosh suggests. Putting domain in mailertable doesn't solve the problem also. sendmail -bt still shows, that address is local. DontProbeInterfaces is also set to true at sendmail config. M4 file follows: divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # make -C /etc/mail dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # dnl define(`SMART_HOST', `smtp.your.provider')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES',`True') define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /usr/share/ssl/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /usr/share/ssl/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Name=MTA,Port=smtp') dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # dnl MASQUERADE_AS(`mydomain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl # dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # dnl FEATURE(masquerade_entire_domain)dnl dnl # dnl MASQUERADE_DOMAIN(localhost)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl FEATURE(`dnsbl',`zen.spamhaus.org',`Rejected - your IP is blacklisted by http://www.spamhaus.org')

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

  - by Koroviev

  What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

  Read the article

• How to get full control of umask/PAM/permissions?

  - by plua

  OUR SITUATION Several people from our company log in to a server and upload files. They all need to be able to upload and overwrite the same files. They have different usernames, but are all part of the same group. However, this is an internet server, so the "other" users should have (in general) just read-only access. So what I want to have is these standard permissions: files: 664 directories: 771 My goal is that all users do not need to worry about permissions. The server should be configured in such a way that these permissions apply to all files and directories, newly created, copied, or over-written. Only when we need some special permissions we'd manually change this. We upload files to the server by SFTP-ing in Nautilus, by mounting the server using sshfs and accessing it in Nautilus as if it were a local folder, and by SCP-ing in the command line. That basically covers our situation and what we aim to do. Now, I have read many things about the beautiful umask functionality. From what I understand umask (together with PAM) should allow me to do exactly what I want: set standard permissions for new files and directories. However, after many many hours of reading and trial-and-error, I still do not get this to work. I get many unexpected results. I really like to get a solid grasp of umask and have many question unanswered. I will post these questions below, together with my findings and an explanation of my trials that led to these questions. Given that many things appear to go wrong, I think that I am doing several things wrong. So therefore, there are many questions. NOTE: I am using Ubuntu 9.10 and therefore can not change the sshd_config to set the umask for the SFTP server. Installed SSH OpenSSH_5.1p1 Debian-6ubuntu2 < required OpenSSH 5.4p1. So here go the questions. 1. DO I NEED TO RESTART FOR PAM CHANGS TO TAKE EFFECT? Let's start with this. There were so many files involved and I was unable to figure out what does and what does not affect things, also because I did not know whether or not I have to restart the whole system for PAM changes to take effect. I did do so after not seeing the expected results, but is this really necessary? Or can I just log out from the server and log back in, and should new PAM policies be effective? Or is there some 'PAM' program to reload? 2. IS THERE ONE SINGLE FILE TO CHANGE THAT AFFECTS ALL USERS FOR ALL SESSIONS? So I ended up changing MANY files, as I read MANY different things. I ended up setting the umask in the following files: ~/.profile -> umask=0002 ~/.bashrc -> umask=0002 /etc/profile -> umask=0002 /etc/pam.d/common-session -> umask=0002 /etc/pam.d/sshd -> umask=0002 /etc/pam.d/login -> umask=0002 I want this change to apply to all users, so some sort of system-wide change would be best. Can it be achieved? 3. AFTER ALL, THIS UMASK THING, DOES IT WORK? So after changing umask to 0002 at every possible place, I run tests. ------------SCP----------- TEST 1: scp testfile (which has 777 permissions for testing purposes) server:/home/ testfile 100% 4 0.0KB/s 00:00 Let's check permissions: user@server:/home$ ls -l total 4 -rwx--x--x 1 user uploaders 4 2011-02-05 17:59 testfile (711) ---------SSH------------ TEST 2: ssh server user@server:/home$ touch anotherfile user@server:/home$ ls -l total 4 -rw-rw-r-- 1 user uploaders 0 2011-02-05 18:03 anotherfile (664) --------SFTP----------- Nautilus: sftp://server/home/ Copy and paste newfile from client to server (777 on client) TEST 3: user@server:/home$ ls -l total 4 -rwxrwxrwx 1 user uploaders 3 2011-02-05 18:05 newfile (777) Create a new file through Nautilus. Check file permissions in terminal: TEST 4: user@server:/home$ ls -l total 4 -rw------- 1 user uploaders 0 2011-02-05 18:06 newfile (600) I mean... WHAT just happened here?! We should get 644 every single time. Instead I get 711, 777, 600, and then once 644. And the 644 is only achieved when creating a new, blank file through SSH, which is the least probable scenario. So I am asking, does umask/pam work after all? 4. SO WHAT DOES IT MEAN TO UMASK SSHFS? Sometimes we mount a server locally, using sshfs. Very useful. But again, we have permissions issues. Here is how we mount: sshfs -o idmap=user -o umask=0113 user@server:/home/ /mnt NOTE: we use umask = 113 because apparently, sshfs starts from 777 instead of 666, so with 113 we get 664 which is the desired file permission. But what now happens is that we see all files and directories as if they are 664. We browse in Nautilus to /mnt and: Right click - New File (newfile) --- TEST 5 Right click - New Folder (newfolder) --- TEST 6 Copy and paste a 777 file from our local client --- TEST 7 So let's check on the command line: user@client:/mnt$ ls -l total 8 -rw-rw-r-- 1 user 1007 3 Feb 5 18:05 copyfile (664) -rw-rw-r-- 1 user 1007 0 Feb 5 18:15 newfile (664) drw-rw-r-- 1 user 1007 4096 Feb 5 18:15 newfolder (664) But hey, let's check this same folder on the server-side: user@server:/home$ ls -l total 8 -rwxrwxrwx 1 user uploaders 3 2011-02-05 18:05 copyfile (777) -rw------- 1 user uploaders 0 2011-02-05 18:15 newfile (600) drwx--x--x 2 user uploaders 4096 2011-02-05 18:15 newfolder (711) What?! The REAL file permissions are very different from what we see in Nautilus. So does this umask on sshfs just create a 'filter' that shows unreal file permissions? And I tried to open a file from another user but the same group that had real 600 permissions but 644 'fake' permissions, and I could still not read this, so what good is this filter?? 5. UMASK IS ALL ABOUT FILES. BUT WHAT ABOUT DIRECTORIES? From my tests I can see that the umask that is being applied also somehow influences the directory permissions. However, I want my files to be 664 (002) and my directories to be 771 (006). So is it possible to have a different umask for directories? 6. PERHAPS UMASK/PAM IS REALLY COOL, BUT UBUNTU IS JUST BUGGY? On the one hand, I have read topics of people that have had success with PAM/UMASK and Ubuntu. On the other hand, I have found many older and newer bugs regarding umask/PAM/fuse on Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/241198 https://bugs.launchpad.net/ubuntu/+source/fuse/+bug/239792 https://bugs.launchpad.net/ubuntu/+source/pam/+bug/253096 https://bugs.launchpad.net/ubuntu/+source/sudo/+bug/549172 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314796 So I do not know what to believe anymore. Should I just give up? Would ACL solve all my problems? Or do I have again problems using Ubuntu? One word of caution with backups using tar. Red Hat /Centos distributions support acls in the tar program but Ubuntu does not support acls when backing up. This means that all acls will be lost when you create a backup. I am very willing to upgrade to Ubuntu 10.04 if that would solve my problems too, but first I want to understand what is happening.

  Read the article

• tmux: Suddenly, cannot horizontally split

  - by A__A__0

  As root, using a reasonably default .profile and .shrc and an empty tmux.conf, I am unable to split the window horizontally. There are a number of cases to consider so I'll list them clearly. Using the keybinding + empty configuration: nothing happens Using the keybinding + my configuration: a bell is generated, nothing else; occasionally, the split will appear and disappear immediately (maybe it always does this, but I'm connecting over ssh so it may not make it through) Using tmux split-window -h with any config: tmux immediately exits I've posted here in order the server and client verbose logs generated by tmux -v during the third case: server started, pid 9523 socket path /tmp/tmux-0/default new client 7 got 100 from client 7 got 101 from client 7 got 102 from client 7 got 103 from client 7 got 104 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 106 from client 7 got 200 from client 7 cmdq 0x801c6e080: new-session (client 7) new term: xterm xterm override: XT xterm override: Ms ]52;%p1%s;%p2%s xterm override: Cs ]12;%p1%s xterm override: Cr ]112 xterm override: Ss [%p1%d q xterm override: Se [2 q new key Oo: 0x1021 (KP/) new key Oj: 0x1022 (KP*) new key Om: 0x1023 (KP-) new key Ow: 0x1024 (KP7) new key Ox: 0x1025 (KP8) new key Oy: 0x1026 (KP9) new key Ok: 0x1027 (KP+) new key Ot: 0x1028 (KP4) new key Ou: 0x1029 (KP5) new key Ov: 0x102a (KP6) new key Oq: 0x102b (KP1) new key Or: 0x102c (KP2) new key Os: 0x102d (KP3) new key OM: 0x102e (KPEnter) new key Op: 0x102f (KP0) new key On: 0x1030 (KP.) new key OA: 0x101d (Up) new key OB: 0x101e (Down) new key OC: 0x1020 (Right) new key OD: 0x101f (Left) new key [A: 0x101d (Up) new key [B: 0x101e (Down) new key [C: 0x1020 (Right) new key [D: 0x101f (Left) new key OH: 0x1018 (Home) new key OF: 0x1019 (End) new key [H: 0x1018 (Home) new key [F: 0x1019 (End) new key Oa: 0x501d (C-Up) new key Ob: 0x501e (C-Down) new key Oc: 0x5020 (C-Right) new key Od: 0x501f (C-Left) new key [a: 0x901d (S-Up) new key [b: 0x901e (S-Down) new key [c: 0x9020 (S-Right) new key [d: 0x901f (S-Left) new key [11^: 0x5002 (C-F1) new key [12^: 0x5003 (C-F2) new key [13^: 0x5004 (C-F3) new key [14^: 0x5005 (C-F4) new key [15^: 0x5006 (C-F5) new key [17^: 0x5007 (C-F6) new key [18^: 0x5008 (C-F7) new key [19^: 0x5009 (C-F8) new key [20^: 0x500a (C-F9) new key [21^: 0x500b (C-F10) new key [23^: 0x500c (C-F11) new key [24^: 0x500d (C-F12) new key [25^: 0x500e (C-F13) new key [26^: 0x500f (C-F14) new key [28^: 0x5010 (C-F15) new key [29^: 0x5011 (C-F16) new key [31^: 0x5012 (C-F17) new key [32^: 0x5013 (C-F18) new key [33^: 0x5014 (C-F19) new key [34^: 0x5015 (C-F20) new key [2^: 0x5016 (C-IC) new key [3^: 0x5017 (C-DC) new key [7^: 0x5018 (C-Home) new key [8^: 0x5019 (C-End) new key [6^: 0x501a (C-NPage) new key [5^: 0x501b (C-PPage) new key [11$: 0x9002 (S-F1) new key [12$: 0x9003 (S-F2) new key [13$: 0x9004 (S-F3) new key [14$: 0x9005 (S-F4) new key [15$: 0x9006 (S-F5) new key [17$: 0x9007 (S-F6) new key [18$: 0x9008 (S-F7) new key [19$: 0x9009 (S-F8) new key [20$: 0x900a (S-F9) new key [21$: 0x900b (S-F10) new key [23$: 0x900c (S-F11) new key [24$: 0x900d (S-F12) new key [25$: 0x900e (S-F13) new key [26$: 0x900f (S-F14) new key [28$: 0x9010 (S-F15) new key [29$: 0x9011 (S-F16) new key [31$: 0x9012 (S-F17) new key [32$: 0x9013 (S-F18) new key [33$: 0x9014 (S-F19) new key [34$: 0x9015 (S-F20) new key [2$: 0x9016 (S-IC) new key [3$: 0x9017 (S-DC) new key [7$: 0x9018 (S-Home) new key [8$: 0x9019 (S-End) new key [6$: 0x901a (S-NPage) new key [5$: 0x901b (S-PPage) new key [11@: 0xd002 (C-S-F1) new key [12@: 0xd003 (C-S-F2) new key [13@: 0xd004 (C-S-F3) new key [14@: 0xd005 (C-S-F4) new key [15@: 0xd006 (C-S-F5) new key [17@: 0xd007 (C-S-F6) new key [18@: 0xd008 (C-S-F7) new key [19@: 0xd009 (C-S-F8) new key [20@: 0xd00a (C-S-F9) new key [21@: 0xd00b (C-S-F10) new key [23@: 0xd00c (C-S-F11) new key [24@: 0xd00d (C-S-F12) new key [25@: 0xd00e (C-S-F13) new key [26@: 0xd00f (C-S-F14) new key [28@: 0xd010 (C-S-F15) new key [29@: 0xd011 (C-S-F16) new key [31@: 0xd012 (C-S-F17) new key [32@: 0xd013 (C-S-F18) new key [33@: 0xd014 (C-S-F19) new key [34@: 0xd015 (C-S-F20) new key [2@: 0xd016 (C-S-IC) new key [3@: 0xd017 (C-S-DC) new key [7@: 0xd018 (C-S-Home) new key [8@: 0xd019 (C-S-End) new key [6@: 0xd01a (C-S-NPage) new key [5@: 0xd01b (C-S-PPage) new key [I: 0x1031 ((null)) new key [O: 0x1032 ((null)) new key OP: 0x1002 (F1) new key OQ: 0x1003 (F2) new key OR: 0x1004 (F3) new key OS: 0x1005 (F4) new key [15~: 0x1006 (F5) new key [17~: 0x1007 (F6) new key [18~: 0x1008 (F7) new key [19~: 0x1009 (F8) new key [20~: 0x100a (F9) new key [21~: 0x100b (F10) new key [23~: 0x100c (F11) new key [24~: 0x100d (F12) new key [2~: 0x1016 (IC) new key [3~: 0x1017 (DC) replacing key OH: 0x1018 (Home) replacing key OF: 0x1019 (End) new key [6~: 0x101a (NPage) new key [5~: 0x101b (PPage) new key [Z: 0x101c (BTab) replacing key OA: 0x101d (Up) replacing key OB: 0x101e (Down) replacing key OD: 0x101f (Left) replacing key OC: 0x1020 (Right) spawn: /bin/sh -- session 0 created writing 207 to client 7 got 208 from client 7 input_parse: '#' ground input_parse: ' ' ground keys are 7 ([?1;2c) received service class 1 complete key [?1;2c 0xfff keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (m) complete key m 0x6d input_parse: 'm' ground keys are 1 (u) complete key u 0x75 input_parse: 'u' ground keys are 1 (x) complete key x 0x78 input_parse: 'x' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (s) complete key s 0x73 input_parse: 's' ground keys are 1 (p) complete key p 0x70 input_parse: 'p' ground keys are 1 (l) complete key l 0x6c input_parse: 'l' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 () complete key 0x7f input_parse: '' ground input_c0_dispatch: ' input_parse: '' ground input_parse: '[' esc_enter input_parse: 'K' csi_enter input_csi_dispatch: 'K' "" "" keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (n) complete key n 0x6e input_parse: 'n' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 (o) complete key o 0x6f input_parse: 'o' ground keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (h) complete key h 0x68 input_parse: 'h' ground keys are 1 ( ) complete key 0xd input_parse: ' ' ground input_c0_dispatch: ' input_parse: ' ' ground input_c0_dispatch: ' new client 13 got 100 from client 13 got 101 from client 13 got 102 from client 13 got 103 from client 13 got 104 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 106 from client 13 got 200 from client 13 cmdq 0x801c6e160: split-window -h (client 13) spawn: /bin/sh -- writing 203 to client 13 input_parse: '#' ground input_parse: ' ' ground input_parse: '#' ground input_parse: ' ' ground lost client 13 session 0 destroyed writing 203 to client 7 got 205 from client 7 writing 204 to client 7 lost client 7 got 207 from server got 203 from server got 204 from server There are some other peculiarities: With a newly created user (from which I overwrote root's .profile and .shrc, tmux works perfectly. Occasionally (twice out of the 50 or so times I've tested it), the splitting will work fine once in a session. (This happened for example when I ran ktrace on tmux, which I can also post) To explain the 'suddenly' part of the title: when I started my newly updated mysql56-server, tmux immediately exited and lost the session. Recently I changed architectures, from FreeBSD 10.0 i386 to amd64, and I am still working through shared library incompatibilities. I suspect that this could be involved, but I can't imagine how an incompatibility of this sort could result in such a specific, isolated failure.

  Read the article

< Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >