Search Results

Search found 13930 results on 558 pages for 'dev center'.

Page 61/558 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Linux Software RAID recovery

  - by Zoredache

  I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

  Read the article

• Syntax for file and process exclusions in Forefront Endpoint Protection?

  - by Massimo

  I can't seem to find an official and up-to-date documentation on how to set up file and process exclusions in Forefront Endpoint Protection 2012. For file types, which of these will work? Are they the same? ext .ext *.ext What about wildcards? .e?t .e* .*t For file paths, which wildcards are allowed and how do they work? C:\path* C:\path\s*e C:\path\somef?le C:\*\somefile C:\pa*\somefile C:\pa?h\somefile *\path *:\path For processes, can wildcard be used when specifying the file name? Same syntax as file paths? Also: I read in this post that, as of October 2009, Real Time Protection ignored wildcards; is this still true for the 2012 version?

  Read the article

• Fix overlapping partitions

  - by Alex

  I have problem with overlapping partitions. GParted shows me all my disk as unallocated area, output of fdisk below: alex@alex-ThinkPad-SL510:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb4b9b90 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2457599 1227776 7 HPFS/NTFS/exFAT /dev/sda2 2457600 571351724 284447062+ 7 HPFS/NTFS/exFAT /dev/sda3 571342846 604661759 16659457 5 Extended /dev/sda4 604661760 625137663 10237952 7 HPFS/NTFS/exFAT /dev/sda5 598650880 604661759 3005440 82 Linux swap / Solaris /dev/sda6 571342848 598650879 13654016 83 Linux Partition table entries are not in disk order Do I understand correctly that overlapping partitions are sda2 and sda3 (sda2 and sda6 overlaps too, because sda6 is the first chunk of sda3, sda3 has type "extended")? Are sda2 and sda3 the cause of problem? How can i fix it without deleting partitions? My OS is Ubuntu 12.04, 64 bit. Thanks in advance.

  Read the article

• Changing the default installation path to a newly installed hard disk

  - by mgj

  Hi, I am currently working on a dual-booted PC. I am using Windows XP and Ubuntu 10.04 Lucid Lynx released in April 2010. The allocated partition to Ubuntu that I am making use of has almost exhausted. Current memory allocations on the PC wrt Ubuntu OS looks like this: bodhgaya@pc146724-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 8.6G 8.0G 113M 99% / none 998M 268K 998M 1% /dev none 1002M 580K 1002M 1% /dev/shm none 1002M 100K 1002M 1% /var/run none 1002M 0 1002M 0% /var/lock none 1002M 0 1002M 0% /lib/init/rw /dev/sda1 25G 16G 9.8G 62% /media/C /dev/sdb1 37G 214M 35G 1% /media/ubuntulinuxstore bodhgaya@pc146724-desktop:~$ cd /tmp I am trying to mount a 40GB(/dev/sdb1 - given below) new hard disk along with my existing Ubuntu system to overcome with hard disk space related issues. I referred to the following tutorial to mount a new hard disk onto the system:- http://www.smorgasbord.net/how-to-in...untu-linux%20/ I was able to successfully mount this hard disk for Ubuntu 0S. I have this new hard disk setup in /media/ubuntulinuxstore directory. The current partition in my system looks like this: bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ sudo fdisk -l [sudo] password for bodhgaya: Disk /dev/sda: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x446eceb5 Device Boot Start End Blocks Id System /dev/sda1 * 2 3264 26210047+ 7 HPFS/NTFS /dev/sda2 3265 4385 9004432+ 83 Linux /dev/sda3 4386 4863 3839535 82 Linux swap / Solaris Disk /dev/sdb: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfa8afa8a Device Boot Start End Blocks Id System /dev/sdb1 1 4862 39053983+ 7 HPFS/NTFS bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ Now, I have a concern wrt the "location" where the new softwares will be installed. Generally softwares are installed via the terminal and by default a fixed path is used to where the post installation set up files can be found (I am talking in context of the drive). This is like the typical case of Windows, where softwares by default are installed in the C: drive. These days people customize their installations to a drive which they find apt to serve their purpose (generally based on availability of hard disk space). I am trying to figure out how to customize the same for Ubuntu. As we all know the most softwares are installed via commands given from the Terminal. My road block is how do I redirect the default path set on the terminal where files get installed to this new hard disk. This if done will help me overcome space constraints I am currently facing wrt the partition on which my Ubuntu is initially installed. I would also by this, save time on not formatting my system and reinstalling Ubuntu and other softwares all over again. Please help me with this, your suggestions are much appreciated.

  Read the article

• Cannot get SCVMM Admin Console to Connect to Hyper-V Server 2008 R2

  - by user63250

  I cannot get SCVMM Admin console to connect to Hyper-V Server 2008. I have changed all firewall settings on the server to allow for a connection, I have even tried turning the firewall off completely. I am getting this error message: Unable to connect to the Virtual Machine Manager server xx.xxx.xxx.xx. the Virtual Machine Manager service on that servier did not respond. Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running. Then try to connect again. If the problem persists, restart the Virtual Machine Manager Service. ID: 1602 I have tried restarting the VMMS service, and that did not work. I have posted a similar question to this before, and was told to make sure to intall the Hyper-V agent on the Hyper-V server. I was told that SCVMM can push the agent out to the server. However, if I cannot connect to the server, how can I use SCVMM to push out the agent? Thanks for any help.

  Read the article

• PC BluRay - Multichannel HD Audio output

  - by sheepsimulator

  When playing a BluRay movie on a PC (any OS, Mac/Win/Linux), I have some questions about audio output: When playing a BluRay disc on the PC using a BluRay player program, can it decode the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) and output the audio directly to the soundcard's 7.1 line-level analog outputs? Is it possible to bitstream the the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) over the HDMI output to a receiver when using a BluRay player program? I'd kinda like to know. I'm contemplating building a home theater PC, and the above functionality is important. I'd prefer that #1 is possible, actually, because it would mean I wouldn't have to buy a receiver.

  Read the article

• Which mediacenter appliance

  - by Guillaume

  I'm looking to buy a mediacenter appliance, but I am a bit lost by all the offers on the market. Here are the features I am looking for : at least 500Go HDD capable of playing HD (1080p) supporting a good range of video and audio codecs support for subtitles including a DVB-T input (coax) and tuner composite video input 5.1 (or 7.1) analog audio output LAN (100M or Gigabit) fileserver (SMB or NFS) remote control possibly digital output (S/PDIF, TOSLINK, or other) no need for integrated DVD player no need for wifi The Ultio Pro looks nice (http://www.thinkgeek.com/electronics/home-entertainment/d3fe). It just lacks a DVB-T input which is a show killer for me. Thanks for your suggestions.

  Read the article

• What is a usable throughput for a home media server

  - by Craig

  I am looking to setup a home server that will act as a media server. This will include both video (possibly HD) and audio. The clients will be a fun mix of hardware but that is a different question. What I want to know is what is the minimum throughput for streaming video without hitches? Is there a "sweet" spot for throughput (price vs. throughput)? I am determining my budget for this "upgrade" and I need to evaluate wether or not upgrading to a 1 Gbps home LAN is required. Sure, it would be sweet and easily handle the traffic but I don't want to do it unless it is necesary.

  Read the article

• Remote control for mythtv?

  - by frankster

  Can anybody reccommend a good remote control to buy to use with mythtv?

  Read the article

• Run Microsoft SCCM Remote Control Viewer on Client Machines?

  - by David Mackey

  I've install SCCM 2012 on a server and have successfully used the Remote Control option to take control of a system I've setup to be managed by SCCM. Now, I don't want to have to log in to a server every time I want to access this client...is there a way to run the Remote Control Viewer client on my desktop OS so I can take remote control of systems rather than having to remote in from the server? This seems like very basic functionality...but I haven't been able to figure it out thus far.

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• How to define a layered model for Storage Architecture ?

  - by Berkay

  i don't have enough knowledge about storage systems but have to tell my audiences about how storage works in organization data centers. For this purpose to keep things simple, first i want to show them a layer model then from top to bottom and then i want to explore all these layers. What i mean by layered model in storage architecture? i want to start my presentation something like that, first layer can be applications, application request a data from storage and then ... ... (the topics i want to cover are file sytems, metadata,the physical implementation of storage (das, nas etc.) ... the request comes to the storage device and storage device (depends on the technology) goes through the disk and disk send back the data using iscsi protol, we can say that the iscsi protocol managing the path between... ... if you help me explain these steps layer by layer by examples and key technologies to be defined, really appreciate it. thanks.

  Read the article

• Two-state script monitor not auto-resolving in SCOM

  - by DeliriumTremens

  This script runs, and if it returns 'erro' an alert is generated in SCOM. The alert is set to resolve when the monitor returns to healthy state. I have tested the script with cscript and it returns the correct values in each state. I'm baffled as to why it generates an alert on 'erro' but will not auto-resolve on 'ok': Option Explicit On Error Resume Next Dim objFSO Dim TargetFile Dim objFile Dim oAPI, oBag Dim StateDataType Dim FileSize Set oAPI = CreateObject("MOM.ScriptAPI") Set oBag = oAPI.CreatePropertyBag() TargetFile = "\\server\share\file.zip" Set objFSO = CreateObject("scripting.filesystemobject") Set objFile = objFSO.GetFile(TargetFile) FileSize = objFile.Size / 1024 If FileSize < 140000 Then Call oBag.AddValue("State", "erro") Else Call oBag.AddValue("State", "ok") End If Call oAPI.AddItem(oBag) Call oAPI.Return(oBag) Unhealthy expression: Property[@Name='State'] Equals erro Health expression: Property[@Name='State'] Equals ok If anyone can shed some light onto what I might be missing, that would be great!

  Read the article

• Win7 MCE seems unable to play ripped DVDs

  - by ilivewithian

  I'm running Windows 7 and am using mymovies.dk to rip the dvds to my harddrive. However, playback isn't watchable as the picture is very stuttery and blocky, only shots that show the same image for a few seconds get shown properly. The dvd's are ripped as the straight folder structure and if played in XBMC are fine. I've tried installing both the cccp-project.net and latest div-x codecs, but that doesn't seem to have helped. I'd like to stick with MCE as it has a high WAF (wife acceptance factor). Any suggestions?

  Read the article

• Ubuntu 12.04 boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails. I've tried to copy the MBR from disk 1 to 2: dd if=/dev/sda of=/dev/sdb bs=512 count=1 but this didn't make a difference. Any ideas how to get it to boot from just the second disk? fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sda1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sda2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sdb1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sdb2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00035b05 Device Boot Start End Blocks Id System /dev/sdd1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c73aa Device Boot Start End Blocks Id System /dev/sdc1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/md1: 1984.3 GB, 1984264208384 bytes 2 heads, 4 sectors/track, 484439504 cylinders, total 3875516032 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2: 2000.3 GB, 2000263380992 bytes 2 heads, 4 sectors/track, 488345552 cylinders, total 3906764416 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0: 16.0 GB, 15990652928 bytes 2 heads, 4 sectors/track, 3903968 cylinders, total 31231744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

  Read the article

• How have you saved green by going green?

  - by Bob

  For the purpose of this question, I am interested in server/datacenter related hardware. Have you had any measureable amount of ROI by swapping existing hardware to more "green" or energy efficient hardware? For example, VMWare says you can reduce energy consumption by up to 80% by using virtualization. I have also heard of a cooling solution from HP which is suppose to reduce a small amount of engery usage (<25% I think). Google has also done something by integrating a UPS into their power supplies to reduce energy consumption. Any real world experiences would be great, but if you have any details on initial cost, savings and pay off time about what changes were make that would fantastic. I am not only interested in virtualization, I am interested in anything.

  Read the article

• how can i on my cookie

  - by Pooja rai

  my cookie is off and i cant turned on it so pls help me

  Read the article

• dsm-750: how do I get it to refresh its media?

  - by jldupont

  How do you get the DSM-750 to update its media from network folders (e.g. files contained on the network on a DNS-323 for example) more quickly? It seems like it doesn't perform this operation automatically.

  Read the article

• IE 11 Preview « apporte la meilleure expérience du Web sur Windows » avec le support de WebGL, SPDY et des « Dev Tools » entièrement reconstruits

  IE 11 Preview « apporte la meilleure expérience du Web sur Windows » avec le support de WebGL, SPDY et des « Dev Tools » entièrement reconstruits Windows 8.1 Preview est là, et avec lui la Preview du navigateur Internet Explorer 11, « qui apporte la meilleure expérience du Web sur un périphérique Windows ».Optimisé pour les mobiles avec le support des récents standards du Web, IE 11 Preview rapproche les sites Web des utilisateurs Windows, offre une sécurité améliorée et dispose des nouveaux outils de développement pour faciliter le test des applications Web.La prise en charge de la navigation t...

  Read the article

• grub problem after grub-repair

  - by alireza

  I had two OS,win 7 and Ubuntu, I was working with win and went out of the room and when came back I saw Grub Rescue!!! I booted live and did grub_repaire and it still says multiple active partitions.operating system not found I feel that it can not find the ubuntu hard drive at all! ! ubuntu@ubuntu:/dev$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xde771741 Device Boot Start End Blocks Id System /dev/sda1 * 61 61 0 0 Empty /dev/sda2 2048 30146559 15072256 27 Hidden NTFS WinRE /dev/sda3 * 30146560 30351359 102400 7 HPFS/NTFS/exFAT /dev/sda4 30351360 334483299 152065970 7 HPFS/NTFS/exFAT ubuntu@ubuntu:/dev$ ls autofs dvdrw loop4 ppp ram5 shm tty15 tty29 tty42 tty56 ttyS10 ttyS24 uinput vcsa1 block ecryptfs loop5 psaux ram6 snapshot tty16 tty3 tty43 tty57 ttyS11 ttyS25 urandom vcsa2 bsg fb0 loop6 ptmx ram7 snd tty17 tty30 tty44 tty58 ttyS12 ttyS26 usbmon0 vcsa3 btrfs-control fd loop7 pts ram8 sr0 tty18 tty31 tty45 tty59 ttyS13 ttyS27 usbmon1 vcsa4 bus full loop-control ram0 ram9 stderr tty19 tty32 tty46 tty6 ttyS14 ttyS28 usbmon2 vcsa5 cdrom fuse mapper ram1 random stdin tty2 tty33 tty47 tty60 ttyS15 ttyS29 v4l vcsa6 cdrw fw0 mcelog ram10 rfkill stdout tty20 tty34 tty48 tty61 ttyS16 ttyS3 vcs vcsa7 char hpet mei ram11 rtc tty tty21 tty35 tty49 tty62 ttyS17 ttyS30 vcs1 vga_arbiter console input mem ram12 rtc0 tty0 tty22 tty36 tty5 tty63 ttyS18 ttyS31 vcs2 video0 core kmsg net ram13 sda tty1 tty23 tty37 tty50 tty7 ttyS19 ttyS4 vcs3 zero cpu log network_latency ram14 sda2 tty10 tty24 tty38 tty51 tty8 ttyS2 ttyS5 vcs4 cpu_dma_latency loop0 network_throughput ram15 sda3 tty11 tty25 tty39 tty52 tty9 ttyS20 ttyS6 vcs5 disk loop1 null ram2 sda4 tty12 tty26 tty4 tty53 ttyprintk ttyS21 ttyS7 vcs6 dri loop2 oldmem ram3 sg0 tty13 tty27 tty40 tty54 ttyS0 ttyS22 ttyS8 vcs7 dvd loop3 port ram4 sg1 tty14 tty28 tty41 tty55 ttyS1 ttyS23 ttyS9 vcsa ubuntu@ubuntu:/dev$ someone said { Remove the boot flag from sda1, by typing in a terminal: sudo fdisk /dev/sda1 Then press the 'a' key, and 'Enter'. Then press the '1' key, and 'Enter'. Then press the 'w' key, and 'Enter'. } but after grub-repair I got this log: http://paste.ubuntu.com/1371297/ then I try sudo fdisk /dev/sda1 and But It says unable to open /dev/sda1! which is right as sda1 is not in dev folder (look at the picture!) Can anybody help me? I need to work on my windows for the rest of the semester and don't care of my ubuntu. thank you

  Read the article

• How do I align my partition table properly?

  - by Jorge Castro

  I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

  Read the article

• error installing python wrapper for openkinect

  - by auraham

  I tried to install python wrappers for OpenKinect on Ubuntu 12.04, but I can't due this error: $ sudo apt-get install python2.7-dev python2.7-dev : Depends: libexpat1-dev but it is not going to be installed Depends: libssl-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. Python wrapper requires these dependencies: Cython python-dev (error above) python-numpy how can I install python-dev?

  Read the article

• Accessing host LVM partition from Windows XP through Virt.manager 0.8.5 / Qemu / KVM

  - by Nico de Smidt

  Hi, requested use case is having a Windows XP SP3 guest running in 64bit Ubuntu. (Linux pcs 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux) I want this guest to access an LVM LV on the Ubuntu disk. I've setup the following LVM config: --- Logical volume --- LV Name /dev/storage/sdc1 VG Name storage LV UUID Zg5IMC-OlqB-prL5-fgg4-3A9A-OgKP-oZ0QkJ LV Write Access read/write LV Status available # open 0 LV Size 1.01 GiB Current LE 259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:3 -- 1) I've setup a storage pool for /dev/storage 2) I've mkfs.vfat /dev/storage/sdc1 3) and made a virtual IDE disk in the virt-manager setup for the guest. Target device: IDE Disk 2 Source path: /dev/storage/sdc1 -- Now when running XP (guest) Windows sees a new disk in Disk Manager and want's to install a partition on it, since it believes the drive is empty. After formatting from within Windows I can put data on the new disk volume. -- Back in Ubuntu however I cannot access this this any more since it created a partition within an LVM Logical Volume. Running fdisk -l shows the following: root@pcs:/media# fdisk -l /dev/storage/sdc1 Disk /dev/storage/sdc1: 1086 MB, 1086324736 bytes 32 heads, 63 sectors/track, 1052 cylinders Units = cylinders of 2016 * 512 = 1032192 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d72e4f4 Device Boot Start End Blocks Id System /dev/storage/sdc1p1 1 1050 1058368+ c W95 FAT32 (LBA) -- which seems fine to me, but when trying to mount /dev/storage/sdc1p1 I get the following error: mount /dev/storage/sdc1p1 /media/xp mount: special device /dev/storage/sdc1p1 does not exist which makes sense since in lvdisplay sdc1p1 does not exist Main question: I want to mount the vfat partition in both Ubuntu and XP What am I missing here????? regards, and thanks for your consideration. Nico

  Read the article

• Is there a difference between installing an application via Ubuntu Software Center or a terminal?

  - by gabriel

  I would like to ask a very basic question but I have never thought about it before. Well, when someone installs an application from terminal, he has to add the repository first, right? On the other side, when someone installs an application from the Ubuntu Software Center, is the repository then added automatically? I am asking those questions to figure out this: When I run update and then upgrade, will this application be upgraded or not? Is the result same in two options?

  Read the article

• Idiots Guide to Setting Up Myth TV?

  - by Jared

  I want to build a MythTV back end. I don't want to compile things if I can help it, and I'd like to know what hardware will work with the cable system in the US. Are there any guides to building a MythTV box? I've found several but they all appear to be three or so years out of date and I have no clue how Linux hardware support has changed since then.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >