Search Results

Search found 2321 results on 93 pages for 'downloads'.

Page 61/93 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• How to stop a ICMP attack?

  - by cumhur onat

  We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

  Read the article

• "java.security.AccessControlException: access denied" executing a signet Java Applet

  - by logoff

  I have a little Java Applet and I have an annoying issue. I have signed my JAR with my own keystore using jarsigner tool (following these instructions). The Java Applet downloads a signed JAR and tries to launch it with an extended class of URLClassLoader. This JAR tries to execute this line of code: ClassLoader.getSystemClassLoader().getResource("aResource"); It fails with a large stack trace finished by: Caused by: java.security.AccessControlException: access denied ("java.lang.RuntimePermission" "getClassLoader") at java.security.AccessControlContext.checkPermission(AccessControlContext.java:366) at java.security.AccessController.checkPermission(AccessController.java:555) at java.lang.SecurityManager.checkPermission(SecurityManager.java:549) at java.lang.Thread.getContextClassLoader(Thread.java:1451) ... 21 more When the Java Applet is launched, the user is prompted to accept the certificate if he/she trusts the publisher: Even if I accept it, the exception occurred. Even if I install the certificate, and the prompt message is automatically accepted, the exception occurred. Any help would be appreciated!

  Read the article

• Memory management, and async operations: when does an object become nil?

  - by Kenny Winker

  I have a view that will be displaying downloaded images and text. I'd like to handle all the downloading asynchronously using ASIHTTPRequest, but I'm not sure how to go about notifying the view when downloads are finished... If I pass my view controller as the delegate of the ASIHTTPRequest, and then my view is destroyed (user navigates away) will it fail gracefully when it tries to message my view controller because the delegate is now nil? i.e. if i do this: UIViewController *myvc = [[UIViewController alloc] init]; request.delegate = myvc; [myvc release]; Do myvc, and request.delegate now == a pointer to nil? This is the problem with being self-taught... I'm kinda fuzzy on some basic concepts. Other ideas of how to handle this are welcome.

  Read the article

• Debugging ASP.NET Strings Downloaded to Browser

  - by jdk

  I'm downloading a vCard to the browser using Response.Write to output .NET strings with special accented characters. Mime type is text/x-vcard and French characters are appearing wrong in Outlook, for example Montréal;Québec .NET string shows as Montréal Québec in browser. I'm using this vCard code from CodeProject.com I've played with the System.Encoding sample code at the bottom of this linked MSDN page to convert the unicode string into bytes and then write the ascii bytes but then I get Montr?al Qu?bec (progress but not a win). Also I've tried setting content type to both us-ascii and utf-8 of the response. Apparently the vcard file downloads as unicode. If I save it as ASCII text and open in Outlook it's okay. So my assumption is I need to cause download of ASCII but am unsure if I'm doing it wrong or have a misunderstanding of where to start.

  Read the article

• SMO missing dll on a clients

  - by Dale

  I've created an app that connects remotely to SQL Server 2008. SQL connections work and all traditional oCommand.ExecuteNonQuery(), work great! But my SMO class using server.ConnectionContext.ExecuteNonQuery(scriptfile); ERROR: missing batch parsing.dll . I can't install these independent utils on a client machines, and then take them all off when done: as suggested by: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=228de03f-3b5a-428a-923f-58a033d316e1 Since my bulk-inserts are large memory hogs containing complete tables, I wrote the tables to a temptable.sql files and used SQLCMD Util and later switch too SMO and I have the same problem. Neither of these can be leveraged on the client's PCs . Any suggestion? thanks :-)

  Read the article

• iPad app store visibility

  - by Jameson

  So I created my iPad app and submitted it to the store, the app is called photogoo. I now have the iPad and I am finding that it is not possible to browse to the app in any way, confirmed by the zero downloads from yesterday. It is only possible to find by searching.. I also noticed that the apps in entertainment were being listed alphabetically and stopped at "F" Am I really being excluded because my app starts with the letter "P" or is it possible there is some reason that I am not being listed under "all apps"?

  Read the article

• how to connect java and mysql using mysql connector java 5.1.12

  - by user225269

  I'm still a beginner in java. I dont have any idea on how to import the files that I have downloaded into my java class. Its in this path: E:\Users\user\Downloads\mysql-connector-java-5.1.12 I don't know what to do with the files I extracted from the file that I have downloaded in the mysql site for me to connect my java application and mysql database. I'm using Netbeans 6.8. And have also installed wampserver. ive already check out This: http://stackoverflow.com/questions/2118369/java-trouble-connecting-to-mysql and this: http://stackoverflow.com/questions/1640910/connecting-to-a-mysql-database But they don't seem to have answers on how to make use of the mysql java connector file from mysql site. Please help, thanks.

  Read the article

• Avoiding EXC_BAD_ACCESS when using the delegate pattern

  - by Kenny Winker

  A have a view controller, and it creates a "downloader" object, which has a reference to the view controller (as a delegate). The downloader calls back the view controller if it successfully downloads the item. This works fine as long as you stay on the view, but if you navigate away before the download is complete I get EXC_BAD_ACCESS. I understand why this is happening, but is there any way to check if an object is still allocated? I tried to test using delegate != nil, and [delegate respondsToSelector:], but it chokes. if (!self.delegate || ![self.delegate respondsToSelector:@selector(downloadComplete:)]) { // delegate is gone, go away quietly [self autorelease]; return; } else { // delegate is still around [self.delegate downloadComplete:result]; } I know I could, a) have the downloader objects retain the view controller b) keep an array of downloaders in the view controller, and set their delegate values to nil when I deallocate the view controller. But I wonder if there is an easier way, where I just test if the delegate address contains a valid object?

  Read the article

• Obtain SubVersion 1.4 executables for Windows

  - by dcw

  I need to work with an old repository, whose db/format contains 2 From this question, I understand that this means it's version 1.4. I have only 1.5 executables, which produce a db/format containing 3 layout sharded 1000 I've tried to use the 1.5 svnadmin to verify the 1.4 repo, but it fails with 'vnadmin: Unknown FS type 'fsfs If anyone's got any ideas on how to fix this, that'd be great. My current working plan is to obtain 1.4 executables. The problem I have is that I've done a fair amount of searching, and I can't find any SubVersion 1.4 executable downloads. Any help would be hugely appreciated.

  Read the article

• How to limit / throttle bandwidth with *multiple* connections

  - by Led

  I'm writing an app in C# that downloads concurrently (in different threads) using multiple connections to multiple servers, and I'd like to be able to limit the used bandwidth. For a single connection the solution would be simple; I'd use the solution posted here : http://www.codeproject.com/KB/IP/Bandwidth_throttling.aspx which calculates a sleep-time for the single connection. I'd like to know what the best way is to do this for multiple connections. Using the ThrottledStream posted above and dividing the bandwidth (say 2MB/sec) evenly among the connections isn't right, if I'd have 3 very slow connections and 1 very fast one they'd all be capped to 512kb/sec, so the fast one won't go above 512kb/sec and the other 3 wouldn't even make that. The preferred solution I think is to cap only the fastest connection(s) so the slower connections are used optimally. Does anyone have any experience with this, example code or any advice ?

  Read the article

• iphone OS 3.1.3 requires snow leopard upgrade

  - by unsorted

  itunes asked me to upgrade my iphone's OS to 3.1.3, so I complied naively. then xcode told me that the latest iphone OS version it could support was 3.1.2. So I went to download a new version from https://developer.apple.com/iphone/index.action#downloads, xcode 3.2.2 with iphone SDK. but when i went to install that, i was told I needed snow leopard 10.6.2 or later. so I'm just making sure that I am not misinterpreting anything when I say that, given that it is impossible to downgrade iphone OS versions without jailbreaking, I need to install a new version of the OS just so I can resume testing apps on my iphone?

  Read the article

• Android cooliris gallery developer documentation

  - by mefesto

  Does anyone know how to integrate with the new Gallery3D app (cooliris android gallery)? I want to launch that app so it shows the thumbnails for only a specific folder. For example, say my app downloads images from my server and stores them in a folder on the sd-card (/sdcard/myapp/image-cache/someid/*). I'd like to be able to do something like the following: // within an activity Uri uri = Uri.withAppendedPath(Media.EXTERNAL_CONTENT_URI, "myapp/image-cache/someid"); Intent intent = new Intent(Intent.ACTION_VIEW, uri); startActivity(intent); Thanks.

  Read the article

• iphone - memory leaks in separate thread

  - by Brodie4598

  I create a second thread to call a method that downloads several images using: [NSThread detachNewThreadSelector:@selector(downloadImages) toTarget:self withObject:nil]; It works fine but I get a long list of leaks in the log similar to: 2010-04-18 00:48:12.287 FS Companion[11074:650f] * _NSAutoreleaseNoPool(): Object 0xbec2640 of class NSCFString autoreleased with no pool in place - just leaking Stack: (0xa58af 0xdb452 0x5e973 0x5e770 0x11d029 0x517fa 0x51708 0x85f2 0x3047d 0x30004 0x99481fbd 0x99481e42) 2010-04-18 00:48:12.288 FS Companion[11074:650f] * _NSAutoreleaseNoPool(): Object 0xbe01510 of class NSCFString autoreleased with no pool in place - just leaking Stack: (0xa58af 0xdb452 0x5e7a6 0x11d029 0x517fa 0x51708 0x85f2 0x3047d 0x30004 0x99481fbd 0x99481e42) 2010-04-18 00:48:12.289 FS Companion[11074:650f] * _NSAutoreleaseNoPool(): Object 0xbde6720 of class NSCFString autoreleased with no pool in place - just leaking Stack: (0xa58af 0xdb452 0x5ea73 0x5e7c2 0x11d029 0x517fa 0x51708 0x85f2 0x3047d 0x30004 0x99481fbd 0x99481e42) Can someone help me understand the problem?

  Read the article

• DESPERATE Request - jQuery tag suggestion, How is it inserting the DOM Element SPAN?

  - by nobosh

  Take a look at this snazy plugin: http://remysharp.com/2007/12/28/jquery-tag-suggestion/ ** it's real small Source: http://remysharp.com/downloads/tag.js For the life of me, I can't figure out where in the plugin JS the code is injecting the SPAN which contains the tags... I see the following around line 73: var tagMatches = document.createElement(settings.tagContainer); But where is it injecting it into the doc? I ask because I need to find a way to control where it goes based on an ID, something like this: document.body.insertBefore(newDiv, my_div); Thanks so much, and good luck, It's tricky!

  Read the article

• Best Practices: How can admin deploy software to 100s of PC ?

  - by Gopal

  Hi ... The Environment: I am working for a college. We have a couple of labs (about 100 PCs) for students. At the end of the semester, the PCs will be full of viruses, corrupt system files, all sorts of illegal downloads etc. (everything you can expect from a student environment). At the end of the semester, we would like to wipe out all the systems and do a clean install (WindowsXP + a set of application suites) to get ready for the next batch of students. Question: Is there any free software that will enable an admin to deploy a clean disk image to all the PCs in one go?

  Read the article

• [C#] SQLite - Creating and changing databases on the fly

  - by Oskar Kjellin

  Today I use SQLite and send a database-file with the project. However I want the database to be created when the user first starts the software. Is there a way to copy the code needed to create a database based on the existing database? The problem is that when a user downloads a new version he might be tricked into copying over his last database and lose the data. I'd like a nice way to check the version of the database and modify it if I need new columns or tables etc. Or, if it does not exist at all, create a new database? I know I can probably make create the code to make the database from the beginning but I want it to be based on the existing database I have created by a gui.

  Read the article

• Nunit test project won't compile under mono

  - by Quandary

  Question: I am implementing an OpenSource version of Microbosoft Sync framework, [http://www.microsoft.com/downloads/d...isplaylang=en] (Checkout: git clone [email protected]:quandary/SyncFramework.git) but I ran into a unittest problem. I added a nunit test-project to the C# project, but it's not compiling... I created the project on Windows, and there it compiled well. On Linux, the project compiles well, but compiling the unittest, I always get: Assembly 'nunit.framework, Version=2.5.5.10112, Culture=neutral, PublicKeyToken=96d09 My problem now is I installed nunit and added a reference to it (on Linux with mono), but I still get this message, I take out 'require specific version', and I still get this message... I also removed the windows reference to nunit, but still no change.

  Read the article

• Compile rt73 driver (serialmonkey) on Ubuntu

  - by Curro

  Hello. I'm trying to compile some WiFi drivers I downloaded from SerialMonkey: http://rt2x00.serialmonkey.com/wiki/index.php/Downloads It's about a driver for a Ralink rt73 chipset. I already got the build-essentials and the kernel-headers on my computer. When I try to compile the driver using the "make" command I get this error: root@curro-ubuntu:/usr/src/rt73-cvs-2009041204/Module# sudo make make[1]: Entering directory `/usr/src/linux-headers-2.6.31-20-generic' Building modules, stage 2. MODPOST 0 modules make[1]: Leaving directory `/usr/src/linux-headers-2.6.31-20-generic' rt73.ko failed to build! make: *** [module] Error 1 I've looked over the Internet and haven't found anything yet, I don't know why am I getting this error. I have Ubuntu 9.10 installed on this computer. I've seen some other persons having the same issue Any help would be greatly appreciated. Thanks in advance

  Read the article

• android content provider robustness on provider crash

  - by user1298992

  On android platforms (confirmed on ICS), if a content provider dies while a client is in the middle of a query (i.e. has a open cursor) the framework decides to kill the client processes holding a open cursor. Here is a logcat output when i tried this with a download manager query that sleeps after doing a query. The "sleep" was to reproduce the problem. you can imagine it happening in a regular use case when the provider dies at the right/wrong time. And then do a kill of com.android.media (which hosts the downloadProvider). "Killing com.example (pid 12234) because provider com.android.providers.downloads.DownloadProvider is in dying process android.process.media" I tracked the code for this in ActivityManagerService::removeDyingProviderLocked Is this a policy decision or is the cursor access unsafe after the provider has died? It looks like the client cursor is holding a fd for an ashmem location populated by the CP. Is this the reason the clients are killed instead of throwing an exception like Binders when the server (provider) dies ?

  Read the article

• trying to connect mysql with vb.net

  - by user225269

  I've found this at connection strings.com http://connectionstrings.com/mysql Do I need to download connector-net from this site: http://dev.mysql.com/downloads/connector/net/ I recycled the code that I used in connecting vb.net with ms sql: Imports system.data.sqlclient idnum = TextBox1.Text lname = TextBox2.Text fname = TextBox3.Text skul = TextBox4.Text Using sqlcon As New SqlConnection("Server=localhost;Port=3306;Database=testing;Uid=root;Pwd=nitoryolai123$%^;") sqlcon.Open() Dim sqlcom As New SqlCommand() sqlcom.Connection = sqlcon sqlcom.CommandText = "INSERT INTO [student](ID, LASTNAME, FIRSTNAME, SCHOOL) VALUES (@ParameterID, @ParameterLastName, @ParameterFirstName, @ParameterSchool)" sqlcom.Parameters.AddWithValue("@ParameterID", TextBox1.Text) sqlcom.Parameters.AddWithValue("@ParameterLastName", TextBox2.Text) sqlcom.Parameters.AddWithValue("@ParameterFirstName", TextBox3.Text) sqlcom.Parameters.AddWithValue("@ParameterSchool", TextBox4.Text) sqlcom.ExecuteNonQuery() End Using But I get this error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Please help, what solutions would you recommend to this problem?

  Read the article

• Can't get to Pex download (or visual studio 2010)

  - by Vaccano

  I know this is probably not a "True" stackoverflow question, but here it is anyway: Is anyone able to get to the MSDN Download of Visual Studio 2010? I just get "Your search did not match any products." when I click on the New Downloads-Visual Studio 2010 link. I was able to download Visual Studio on Monday. But it is gone now. That is not really my issue though. That page is also where the pex download is. With that page down I can't download pex either. (I checked with a co-worker (who is having the same issue) before posting. So I know it is not just me.)

  Read the article

• An important question on iPhone file writing

  - by Kyle

  I use the NSHomeDirectory() function to get the app's home folder, and write to the Documents directory within that. I'm curious, though, what happens when the user downloads an update for the app in the appstore? Will it all be deleted? When I delete the app on the device, then reinstall it, its wiped out. So, I'm curious to know what will happen with an update. I can't find this in the documentation at all. Thanks alot for reading. I really tried to find this asked somewhere else first, but couldn't. Hopefully this page will be informative to guys like me who are confused on the subject.

  Read the article

• iPhone image app not releasing memory as in instruments using imageNamed

  - by Tankista

  hi, im building iPhone app that downloads images (UIImageView) from internet and adding them to UIScrollView. This scroll view could contain 20 or more UIImageViews. Iam adding UIImages to UIImageView like this: UIImageView *newView = [[UIImageView alloc] initWithImage: image]; Then I just scroll these images like in photo app. Problem is, when I put just 3 UIImageViews in UIScrollView everything works fine, but when I put more images, more memory is used, so that app can crash after 15 or more images. I can understand it that more images alloc more memory, but in Instruments i get allocated max 2-3 MB, but in device memory raises until it crashes. When I use simulator for OS 3.0 i can see memory rising like on device. On higher versions I dont see this memory raise, why is that?

  Read the article

• Using an XML Catalog with a Java library that uses JAXP internally

  - by Brian Ferris

  I'm using the Apache web service xml rpc library to make requests to an rpc service. Somewhere in that process is a xml document with a DTD reference to http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd, which the library attempts to download when parsing the XML. That download fails with a 503 status code because the w3c is blocking repeated downloads of this largely static document from Java clients. The solution is XML Catalogs to locally cache the DTD. However, while I can find examples of setting an EntityHandler on a JAXP SAXParser instance directly to enable catalog parser support, I don't actually have access to the underlying parser here. It's just being used by the xml rpc library. Is there any way I can set a global property or something that will tell JAXP to use XML catalogs?

  Read the article

• How to set up 3rd party developer portal

  - by Michael

  I am developing a web service and depend on 3rd party developers to write client applications for it. I need to set a developer portal, a web site where existing and potential developers would find documentation html pages doc files for download libraries downloads wiki forums support ticketing system. There should be a public part and a part protected by login. I want only logged in users to submit tickets, for example. I don't want to host it. I would prefer a generic design based on a sensible template, where I can add minimal customization, such as logo. I don't want to add code to get any of the above functionality. I will do all that if necessary, but I'd hope there would be an online service to do thing like that. What services would you guys recommend?

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >