Search Results

Search found 9338 results on 374 pages for 'fedora 15'.

Page 61/374 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• How to mount a blu-ray drive?

  - by Stephan Schielke

  Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

  Read the article

• Unity – Part 5: Injecting Values

  - by Ricardo Peres

  Introduction This is the fifth post on Unity. You can find the introductory post here, the second post, on dependency injection here, a third one on Aspect Oriented Programming (AOP) here and the latest so far, on writing custom extensions, here. This time we will talk about injecting simple values. An Inversion of Control (IoC) / Dependency Injector (DI) container like Unity can be used for things other than injecting complex class dependencies. It can also be used for setting property values or method/constructor parameters whenever a class is built. The main difference is that these values do not have a lifetime manager associated with them and do not come from the regular IoC registration store. Unlike, for instance, MEF, Unity won’t let you register as a dependency a string or an integer, so you have to take a different approach, which I will describe in this post. Scenario Let’s imagine we have a base interface that describes a logger – the same as in previous examples: 1: public interface ILogger 2: { 3: void Log(String message); 4: } And a concrete implementation that writes to a file: 1: public class FileLogger : ILogger 2: { 3: public String Filename 4: { 5: get; 6: set; 7: } 8:  9: #region ILogger Members 10:  11: public void Log(String message) 12: { 13: using (Stream file = File.OpenWrite(this.Filename)) 14: { 15: Byte[] data = Encoding.Default.GetBytes(message); 16: 17: file.Write(data, 0, data.Length); 18: } 19: } 20:  21: #endregion 22: } And let’s say we want the Filename property to come from the application settings (appSettings) section on the Web/App.config file. As usual with Unity, there is an extensibility point that allows us to automatically do this, both with code configuration or statically on the configuration file. Extending Injection We start by implementing a class that will retrieve a value from the appSettings by inheriting from ValueElement: 1: sealed class AppSettingsParameterValueElement : ValueElement, IDependencyResolverPolicy 2: { 3: #region Private methods 4: private Object CreateInstance(Type parameterType) 5: { 6: Object configurationValue = ConfigurationManager.AppSettings[this.AppSettingsKey]; 7:  8: if (parameterType != typeof(String)) 9: { 10: TypeConverter typeConverter = this.GetTypeConverter(parameterType); 11:  12: configurationValue = typeConverter.ConvertFromInvariantString(configurationValue as String); 13: } 14:  15: return (configurationValue); 16: } 17: #endregion 18:  19: #region Private methods 20: private TypeConverter GetTypeConverter(Type parameterType) 21: { 22: if (String.IsNullOrEmpty(this.TypeConverterTypeName) == false) 23: { 24: return (Activator.CreateInstance(TypeResolver.ResolveType(this.TypeConverterTypeName)) as TypeConverter); 25: } 26: else 27: { 28: return (TypeDescriptor.GetConverter(parameterType)); 29: } 30: } 31: #endregion 32:  33: #region Public override methods 34: public override InjectionParameterValue GetInjectionParameterValue(IUnityContainer container, Type parameterType) 35: { 36: Object value = this.CreateInstance(parameterType); 37: return (new InjectionParameter(parameterType, value)); 38: } 39: #endregion 40:  41: #region IDependencyResolverPolicy Members 42:  43: public Object Resolve(IBuilderContext context) 44: { 45: Type parameterType = null; 46:  47: if (context.CurrentOperation is ResolvingPropertyValueOperation) 48: { 49: ResolvingPropertyValueOperation op = (context.CurrentOperation as ResolvingPropertyValueOperation); 50: PropertyInfo prop = op.TypeBeingConstructed.GetProperty(op.PropertyName); 51: parameterType = prop.PropertyType; 52: } 53: else if (context.CurrentOperation is ConstructorArgumentResolveOperation) 54: { 55: ConstructorArgumentResolveOperation op = (context.CurrentOperation as ConstructorArgumentResolveOperation); 56: String args = op.ConstructorSignature.Split('(')[1].Split(')')[0]; 57: Type[] types = args.Split(',').Select(a => Type.GetType(a.Split(' ')[0])).ToArray(); 58: ConstructorInfo ctor = op.TypeBeingConstructed.GetConstructor(types); 59: parameterType = ctor.GetParameters().Where(p => p.Name == op.ParameterName).Single().ParameterType; 60: } 61: else if (context.CurrentOperation is MethodArgumentResolveOperation) 62: { 63: MethodArgumentResolveOperation op = (context.CurrentOperation as MethodArgumentResolveOperation); 64: String methodName = op.MethodSignature.Split('(')[0].Split(' ')[1]; 65: String args = op.MethodSignature.Split('(')[1].Split(')')[0]; 66: Type[] types = args.Split(',').Select(a => Type.GetType(a.Split(' ')[0])).ToArray(); 67: MethodInfo method = op.TypeBeingConstructed.GetMethod(methodName, types); 68: parameterType = method.GetParameters().Where(p => p.Name == op.ParameterName).Single().ParameterType; 69: } 70:  71: return (this.CreateInstance(parameterType)); 72: } 73:  74: #endregion 75:  76: #region Public properties 77: [ConfigurationProperty("appSettingsKey", IsRequired = true)] 78: public String AppSettingsKey 79: { 80: get 81: { 82: return ((String)base["appSettingsKey"]); 83: } 84:  85: set 86: { 87: base["appSettingsKey"] = value; 88: } 89: } 90: #endregion 91: } As you can see from the implementation of the IDependencyResolverPolicy.Resolve method, this will work in three different scenarios: When it is applied to a property; When it is applied to a constructor parameter; When it is applied to an initialization method. The implementation will even try to convert the value to its declared destination, for example, if the destination property is an Int32, it will try to convert the appSettings stored string to an Int32. Injection By Configuration If we want to configure injection by configuration, we need to implement a custom section extension by inheriting from SectionExtension, and registering our custom element with the name “appSettings”: 1: sealed class AppSettingsParameterInjectionElementExtension : SectionExtension 2: { 3: public override void AddExtensions(SectionExtensionContext context) 4: { 5: context.AddElement<AppSettingsParameterValueElement>("appSettings"); 6: } 7: } And on the configuration file, for setting a property, we use it like this: 1: <appSettings> 2: <add key="LoggerFilename" value="Log.txt"/> 3: </appSettings> 4: <unity xmlns="http://schemas.microsoft.com/practices/2010/unity"> 5: <container> 6: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.ConsoleLogger, MyAssembly"/> 7: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.FileLogger, MyAssembly" name="File"> 8: <lifetime type="singleton"/> 9: <property name="Filename"> 10: <appSettings appSettingsKey="LoggerFilename"/> 11: </property> 12: </register> 13: </container> 14: </unity> If we would like to inject the value as a constructor parameter, it would be instead: 1: <unity xmlns="http://schemas.microsoft.com/practices/2010/unity"> 2: <sectionExtension type="MyNamespace.AppSettingsParameterInjectionElementExtension, MyAssembly" /> 3: <container> 4: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.ConsoleLogger, MyAssembly"/> 5: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.FileLogger, MyAssembly" name="File"> 6: <lifetime type="singleton"/> 7: <constructor> 8: <param name="filename" type="System.String"> 9: <appSettings appSettingsKey="LoggerFilename"/> 10: </param> 11: </constructor> 12: </register> 13: </container> 14: </unity> Notice the appSettings section, where we add a LoggerFilename entry, which is the same as the one referred by our AppSettingsParameterInjectionElementExtension extension. For more advanced behavior, you can add a TypeConverterName attribute to the appSettings declaration, where you can pass an assembly qualified name of a class that inherits from TypeConverter. This class will be responsible for converting the appSettings value to a destination type. Injection By Attribute If we would like to use attributes instead, we need to create a custom attribute by inheriting from DependencyResolutionAttribute: 1: [Serializable] 2: [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Property, AllowMultiple = false, Inherited = true)] 3: public sealed class AppSettingsDependencyResolutionAttribute : DependencyResolutionAttribute 4: { 5: public AppSettingsDependencyResolutionAttribute(String appSettingsKey) 6: { 7: this.AppSettingsKey = appSettingsKey; 8: } 9:  10: public String TypeConverterTypeName 11: { 12: get; 13: set; 14: } 15:  16: public String AppSettingsKey 17: { 18: get; 19: private set; 20: } 21:  22: public override IDependencyResolverPolicy CreateResolver(Type typeToResolve) 23: { 24: return (new AppSettingsParameterValueElement() { AppSettingsKey = this.AppSettingsKey, TypeConverterTypeName = this.TypeConverterTypeName }); 25: } 26: } As for file configuration, there is a mandatory property for setting the appSettings key and an optional TypeConverterName  for setting the name of a TypeConverter. Both the custom attribute and the custom section return an instance of the injector AppSettingsParameterValueElement that we implemented in the first place. Now, the attribute needs to be placed before the injected class’ Filename property: 1: public class FileLogger : ILogger 2: { 3: [AppSettingsDependencyResolution("LoggerFilename")] 4: public String Filename 5: { 6: get; 7: set; 8: } 9:  10: #region ILogger Members 11:  12: public void Log(String message) 13: { 14: using (Stream file = File.OpenWrite(this.Filename)) 15: { 16: Byte[] data = Encoding.Default.GetBytes(message); 17: 18: file.Write(data, 0, data.Length); 19: } 20: } 21:  22: #endregion 23: } Or, if we wanted to use constructor injection: 1: public class FileLogger : ILogger 2: { 3: public String Filename 4: { 5: get; 6: set; 7: } 8:  9: public FileLogger([AppSettingsDependencyResolution("LoggerFilename")] String filename) 10: { 11: this.Filename = filename; 12: } 13:  14: #region ILogger Members 15:  16: public void Log(String message) 17: { 18: using (Stream file = File.OpenWrite(this.Filename)) 19: { 20: Byte[] data = Encoding.Default.GetBytes(message); 21: 22: file.Write(data, 0, data.Length); 23: } 24: } 25:  26: #endregion 27: } Usage Just do: 1: ILogger logger = ServiceLocator.Current.GetInstance<ILogger>("File"); And off you go! A simple way do avoid hardcoded values in component registrations. Of course, this same concept can be applied to registry keys, environment values, XML attributes, etc, etc, just change the implementation of the AppSettingsParameterValueElement class. Next stop: custom lifetime managers.

  Read the article

• TechDays Canada 2010

  - by guybarrette

  John Oxley announced that TechDays is returning to Canada in more cities then ever in 2010. Vancouver – September 14/15 at the Vancouver Convention Centre Edmonton – October 5/6 at the Shaw Conference Centre Toronto – October 27/28 at the Metro Toronto Convention Centre Halifax – November 2/3 at the World Trade & Convention Centre Ottawa – November 9/10 at the Hampton Inn & Conference Centre Montreal – November 23/24 at the Palais de Congres Winnipeg – December 7/8 at the Winnipeg Convention Centre Calgary – December 14/15 at the Calgary Stampede Get all the info here var addthis_pub="guybarrette";

  Read the article

• Oracle SOA Partner Community Forum Lisbon, Portugal - 21/Apr/10

  - by Claudia Costa

    We would like to invite you to attend our SOA Partner Community Forum that will be in held in Lisbon, April 21, 2010 The Oracle SOA Partner Community Forum is a wonderful opportunity to: Meet with Oracle SOA and BPM Product management Exchange thoughts and knowledge with SOA and BPM experts Learn from successful SOA implementation Network within the Oracle SOA Partner Community During this highly informative event you can learn about partner success stories, participate in an array of breakout sessions, exchange information with other partners and enjoy a vibrant panel discussion. Places are limited, so register today. Registration only takes a few minutes and it is free of charge. By registration you will confirm that you will attend to the event. Seminar is free. In the event that you cancel your registration after April 16th 2010 Oracle may request that you will pay late cancellation fee of € 150. Please visit our website for further information. Alternatively, if you require assistance or have any queries please contact Jürgen Kress. Agenda 10:00     Welcome & Introduction 10:15     SOA Cloud presentation 11:15     SOA Partner Sales Campaign 12:30     Lunch break 13:15     Partner Reference Case 14:15     BPMN 2.0 15:00     Cocktail reception   Become a member of the SOA Partner Community - free of charge! Please first login at http://partner.oracle.com and then visit: http://www.oracle.com/goto/emea/soaThe goal of the SOA Partner Community is to provide you with the latest information on Oracle's SOA and BPM offerings and to facilitate the exchange of experience around Oracle SOA between community members.   The SOA Partner Community keeps you informed about: ·         News & Events ·         Product Information ·         Education & Certification ·         Analyst Report ·         Marketing & Sales ·         Monthly SOA Newsletter ·         Monthly SOA Webcast ·         SOA Community Forum ------------------------------------------------   Location: Lagoas Park Hotel 2740-245, Porto Salvo, Oeiras  

  Read the article

• C#: Why Decorate When You Can Intercept

  - by James Michael Hare

  We've all heard of the old Decorator Design Pattern (here) or used it at one time or another either directly or indirectly.  A decorator is a class that wraps a given abstract class or interface and presents the same (or a superset) public interface but "decorated" with additional functionality.   As a really simplistic example, consider the System.IO.BufferedStream, it itself is a descendent of System.IO.Stream and wraps the given stream with buffering logic while still presenting System.IO.Stream's public interface:   1: Stream buffStream = new BufferedStream(rawStream); Now, let's take a look at a custom-code example.  Let's say that we have a class in our data access layer that retrieves a list of products from a database:  1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: ... 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: var results = new List<Product>(); 10:  11: // must create the connection 12: using (var con = _factory.CreateConnection()) 13: { 14: con.ConnectionString = _productsConnectionString; 15: con.Open(); 16:  17: // create the command 18: using (var cmd = _factory.CreateCommand()) 19: { 20: cmd.Connection = con; 21: cmd.CommandText = _getAllProductsStoredProc; 22: cmd.CommandType = CommandType.StoredProcedure; 23:  24: // get a reader and pass back all results 25: using (var reader = cmd.ExecuteReader()) 26: { 27: while(reader.Read()) 28: { 29: results.Add(new Product 30: { 31: Name = reader["product_name"].ToString(), 32: ... 33: }); 34: } 35: } 36: } 37: }            38:  39: return results; 40: } 41: } Yes, you could use EF or any myriad other choices for this sort of thing, but the germaine point is that you have some operation that takes a non-trivial amount of time.  What if, during the production day I notice that my application is performing slowly and I want to see how much of that slowness is in the query versus my code.  Well, I could easily wrap the logic block in a System.Diagnostics.Stopwatch and log the results to log4net or other logging flavor of choice: 1:     // a class that handles our CRUD operations for products 2:     public class ProductDao 3:     { 4:         private static readonly ILog _log = LogManager.GetLogger(typeof(ProductDao)); 5:         ... 6:         7:         // a method that would retrieve all available products 8:         public IEnumerable<Product> GetAvailableProducts() 9:         { 10:             var results = new List<Product>(); 11:             var timer = Stopwatch.StartNew(); 12:             13:             // must create the connection 14:             using (var con = _factory.CreateConnection()) 15:             { 16:                 con.ConnectionString = _productsConnectionString; 17:                 18:                 // and all that other DB code... 19:                 ... 20:             } 21:             22:             timer.Stop(); 23:             24:             if (timer.ElapsedMilliseconds > 5000) 25:             { 26:                 _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 27:                     timer.ElapsedMillseconds); 28:             } 29:             30:             return results; 31:         } 32:     } In my eye, this is very ugly.  It violates Single Responsibility Principle (SRP), which says that a class should only ever have one responsibility, where responsibility is often defined as a reason to change.  This class (and in particular this method) has two reasons to change: If the method of retrieving products changes. If the method of logging changes. Well, we could “simplify” this using the Decorator Design Pattern (here).  If we followed the pattern to the letter, we'd need to create a base decorator that implements the DAOs public interface and forwards to the wrapped instance.  So let's assume we break out the ProductDAO interface into IProductDAO using your refactoring tool of choice (Resharper is great for this). Now, ProductDao will implement IProductDao and get rid of all logging logic: 1:     public class ProductDao : IProductDao 2:     { 3:         // this reverts back to original version except for the interface added 4:     } 5:  And we create the base Decorator that also implements the interface and forwards all calls: 1:     public class ProductDaoDecorator : IProductDao 2:     { 3:         private readonly IProductDao _wrappedDao; 4:         5:         // constructor takes the dao to wrap 6:         public ProductDaoDecorator(IProductDao wrappedDao) 7:         { 8:             _wrappedDao = wrappedDao; 9:         } 10:         11:         ... 12:         13:         // and then all methods just forward their calls 14:         public IEnumerable<Product> GetAvailableProducts() 15:         { 16:             return _wrappedDao.GetAvailableProducts(); 17:         } 18:     } This defines our base decorator, then we can create decorators that add items of interest, and for any methods we don't decorate, we'll get the default behavior which just forwards the call to the wrapper in the base decorator: 1:     public class TimedThresholdProductDaoDecorator : ProductDaoDecorator 2:     { 3:         private static readonly ILog _log = LogManager.GetLogger(typeof(TimedThresholdProductDaoDecorator)); 4:         5:         public TimedThresholdProductDaoDecorator(IProductDao wrappedDao) : 6:             base(wrappedDao) 7:         { 8:         } 9:         10:         ... 11:         12:         public IEnumerable<Product> GetAvailableProducts() 13:         { 14:             var timer = Stopwatch.StartNew(); 15:             16:             var results = _wrapped.GetAvailableProducts(); 17:             18:             timer.Stop(); 19:             20:             if (timer.ElapsedMilliseconds > 5000) 21:             { 22:                 _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 23:                     timer.ElapsedMillseconds); 24:             } 25:             26:             return results; 27:         } 28:     } Well, it's a bit better.  Now the logging is in its own class, and the database logic is in its own class.  But we've essentially multiplied the number of classes.  We now have 3 classes and one interface!  Now if you want to do that same logging decorating on all your DAOs, imagine the code bloat!  Sure, you can simplify and avoid creating the base decorator, or chuck it all and just inherit directly.  But regardless all of these have the problem of tying the logging logic into the code itself. Enter the Interceptors.  Things like this to me are a perfect example of when it's good to write an Interceptor using your class library of choice.  Sure, you could design your own perfectly generic decorator with delegates and all that, but personally I'm a big fan of Castle's Dynamic Proxy (here) which is actually used by many projects including Moq. What DynamicProxy allows you to do is intercept calls into any object by wrapping it with a proxy on the fly that intercepts the method and allows you to add functionality.  Essentially, the code would now look like this using DynamicProxy: 1: // Note: I like hiding DynamicProxy behind the scenes so users 2: // don't have to explicitly add reference to Castle's libraries. 3: public static class TimeThresholdInterceptor 4: { 5: // Our logging handle 6: private static readonly ILog _log = LogManager.GetLogger(typeof(TimeThresholdInterceptor)); 7:  8: // Handle to Castle's proxy generator 9: private static readonly ProxyGenerator _generator = new ProxyGenerator(); 10:  11: // generic form for those who prefer it 12: public static object Create<TInterface>(object target, TimeSpan threshold) 13: { 14: return Create(typeof(TInterface), target, threshold); 15: } 16:  17: // Form that uses type instead 18: public static object Create(Type interfaceType, object target, TimeSpan threshold) 19: { 20: return _generator.CreateInterfaceProxyWithTarget(interfaceType, target, 21: new TimedThreshold(threshold, level)); 22: } 23:  24: // The interceptor that is created to intercept the interface calls. 25: // Hidden as a private inner class so not exposing Castle libraries. 26: private class TimedThreshold : IInterceptor 27: { 28: // The threshold as a positive timespan that triggers a log message. 29: private readonly TimeSpan _threshold; 30:  31: // interceptor constructor 32: public TimedThreshold(TimeSpan threshold) 33: { 34: _threshold = threshold; 35: } 36:  37: // Intercept functor for each method invokation 38: public void Intercept(IInvocation invocation) 39: { 40: // time the method invocation 41: var timer = Stopwatch.StartNew(); 42:  43: // the Castle magic that tells the method to go ahead 44: invocation.Proceed(); 45:  46: timer.Stop(); 47:  48: // check if threshold is exceeded 49: if (timer.Elapsed > _threshold) 50: { 51: _log.WarnFormat("Long execution in {0} took {1} ms", 52: invocation.Method.Name, 53: timer.ElapsedMillseconds); 54: } 55: } 56: } 57: } Yes, it's a bit longer, but notice that: This class ONLY deals with logging long method calls, no DAO interface leftovers. This class can be used to time ANY class that has an interface or virtual methods. Personally, I like to wrap and hide the usage of DynamicProxy and IInterceptor so that anyone who uses this class doesn't need to know to add a Castle library reference.  As far as they are concerned, they're using my interceptor.  If I change to a new library if a better one comes along, they're insulated. Now, all we have to do to use this is to tell it to wrap our ProductDao and it does the rest: 1: // wraps a new ProductDao with a timing interceptor with a threshold of 5 seconds 2: IProductDao dao = TimeThresholdInterceptor.Create<IProductDao>(new ProductDao(), 5000); Automatic decoration of all methods!  You can even refine the proxy so that it only intercepts certain methods. This is ideal for so many things.  These are just some of the interceptors we've dreamed up and use: Log parameters and returns of methods to XML for auditing. Block invocations to methods and return default value (stubbing). Throw exception if certain methods are called (good for blocking access to deprecated methods). Log entrance and exit of a method and the duration. Log a message if a method takes more than a given time threshold to execute. Whether you use DynamicProxy or some other technology, I hope you see the benefits this adds.  Does it completely eliminate all need for the Decorator pattern?  No, there may still be cases where you want to decorate a particular class with functionality that doesn't apply to the world at large. But for all those cases where you are using Decorator to add functionality that's truly generic.  I strongly suggest you give this a try!

  Read the article

• Strategies for very fast delivery of webpages.

  - by Cherian

  I run a website Cucumbertown with an initial pay load of nearly 9KB zipped. All my js is delayed loaded with requirejs and modernizer is the only exception. Now all my webpages are Nginx cached and only 10-15% hits go to the backend proxy. And the cache is invalidated by logged in users as proxy_cache_bypass. So for an anonymous user its nearly always a cache hit. I have some basic OS tuning with default via ip dev eth0 initcwnd 15 net.ipv4.tcp_slow_start_after_idle 0 Despite an all cache & large initcwnd my pages still take 2.5 – 3 seconds. I have a yslow score of And page speed at Are there strategies that can help deliver webpages even faster than this? Deliver pages at 1+ second time for 10KB payload? Notes: My servers run of a fairly good data center from Linode at Fremont.

  Read the article

• What does an asterisk/star in traceroute mean?

  - by Chang

  The below is a part of traceroute to my hosted server: 9 ae-2-2.ebr2.dallas1.level3.net (4.69.132.106) 19.433 ms 19.599 ms 19.275 ms 10 ae-72-72.csw2.dallas1.level3.net (4.69.151.141) 19.496 ms ae-82-82.csw3.dallas1.level3.net (4.69.151.153) 19.630 ms ae-62-62.csw1.dallas1.level3.net (4.69.151.129) 19.518 ms 11 ae-3-80.edge4.dallas3.level3.net (4.69.145.141) 19.659 ms ae-2-70.edge4.dallas3.level3.net (4.69.145.77) 90.610 ms ae-4-90.edge4.dallas3.level3.net (4.69.145.205) 19.658 ms 12 the-planet.edge4.dallas3.level3.net (4.59.32.30) 19.905 ms 19.519 ms 19.688 ms 13 te9-2.dsr01.dllstx3.networklayer.com (70.87.253.14) 40.037 ms 24.063 ms te2-4.dsr02.dllstx3.networklayer.com (70.87.255.46) 28.605 ms 14 * * * 15 * * * 16 zyzzyva.site5.com (174.122.37.66) 20.414 ms 20.603 ms 20.467 ms What's the meaning of lines 14 and 15? Information hidden?

  Read the article

• CodePlex Daily Summary for Tuesday, July 16, 2013

  CodePlex Daily Summary for Tuesday, July 16, 2013Popular ReleasesOsmSharp: OsmSharp v3.1.4840.2: Release notes: - Fixed issue: http://osmsharp.codeplex.com/workitem/1246 'Optimized route has zero TotalDistance' - Fixed lazy loading strategy for datasource routing. - Fixed precision bug in View. - Added unittests for instruction generation. - Added daily build nuget packages: Daily build packages at http://5.9.56.3:8080/guestAuth/app/nuget/v1/FeedService.svc/ - Fixed default direction on roundabout: roundabouts are always oneway. - Take average left+right turn. - Fixed UTF8 encoding issu...PMU Connection Tester: PMU Connection Tester v4.4.0: This is the current release build of the PMU Connection Tester, version 4.4.0 This version of the connection tester was released with openPDC 1.5 SP1 and openPDC 2.0 BETA. This application requires that .NET 4.0 already be installed on your system. Note this is the last release of the PMU Connection Tester that will built on .NET 4.0 using the TVA Code Library and the Time-series Framework. Future releases of the PMU Connection Tester will be built on .NET 4.5 (or later) using the Grid Sol...WatchersNET.SiteMap: WatchersNE​T.SiteMap 01.03.08: changes Localized Tab Name is now usedStackWalker - Walking the callstack: StackWalker - 2013-07-15: This project describes and implements the (documented) way to walk a callstack for any thread (own, other and remote). It has an abstraction layer, so the calling app does not need to know the internals. This release has some bugfixes for VC5/6.GoAgent GUI: GoAgent GUI 1.1.0 ???: ???????，??????????????，?????????????? ???????? ????： 1．1．0? ??? ?????????? ????????? ??：??cn/hk????，?????????????????????。Hosts??????google_hk。Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...TypePipe: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of the TypePipe for .NET 4.5. Find the complete release notes for the build here: Release Notes.re-linq: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of re-linq for .NET 4.5. Find the complete release notes for the build here: Release Notes To use re-linq with .NET 3.5, use a 1.13.x build.Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsDataDevelop: Beta 0.6.5: Hotfix bug in Python Table.ImportAll method Updated External Libraries Fixes in Excel Exportation Modify ConnectionString refreshes the Properties Window correctlyUser Group Labs: User Group Data: 01.00.00: This release has the following updates and new features: Initial release with a minimal feature set Easy to use (just add to the social group details page) Edit common user group properties System Requirements DNN v07.00.02 or newer .Net Framework v4.0 or newerCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130713): Product documentation and additional templates for this version is included in the zip archive, or if you want individual files, visit the http://www.carrotware.com website. Templates, in addition to those found in the download, can be downloaded individually from the website as well. If you are coming from earlier versions, make a precautionary backup of your existing website files and database. When installing the update, the database update engine will create the new schema items (if you...Dalmatian Build Script: Dalmatian Build 0.1.3.0: -Minor bug fixes -Added Choose<T> and ChooseYesNo to Console objectPushover.NET: Pushover.NET - Stable Release 10 July 2013: This is the first stable release of Pushover.NET. It includes 14 overloads of the SendNotification method, giving you total flexibility of sending Pushover notifications from your client. Assembly is built to .NET 2.x so it can be called from .NET 2.x, 3.x and 4.x projects. Also available is the Test Harness. This is a small GUI that you can use to test calls to Pushover.NET's main DLL. It's almost fully functional--the sound effects haven't been fully configured so no matter what you pick ...MCEBuddy 2.x: MCEBuddy 2.3.14: 2.3.14 BETA is available through the Early Access Program.Click here https://mcebuddy2x.codeplex.com/discussions/439439 for details and to get access to Early Access Program to download latest releases. Changelog for 2.3.14 (32bit and 64bit) NEW FEATURES: 1. ENHANCEMENTS: 2. Improved eMail notifications 3. Improved metrics details 4. Support for larger history (INI) file (about 45,000 sections, each section can have about 1500 entries) BUG FIXES: 5. Fix for extracting Movie release year from...Azure Depot: Flask: Flask Version 01New Projects(??：wwqgtxx-goagent)???goagent/??wallproxy???????????????: =*greatagent*(??：wwqgtxx-goagent)= = [downloads downloads??] = =[WhyMove ??????？]= ==???goagent/??wallproxy???????????????，?????goagent?wallproxy??????????，??Azure Anonymous SAS URL Generator: The Azure Anonymous SAS URL Generator allows you to generate anonymous Shared Access Signature URLs for individual Blobs stored within a given storage containerBizTalk ESB Toolkit Enterprise Library machine.config Toggler: This tool provides an instant on/off switch for the enterpriseLibrary.ConfigurationSource changes that the BizTalk ESB Toolkit makes to machine.config.Common .NET Utilities: Just some common utilities I've developed over the years that are shared among my various projects.DIY Online System: To create a Philippine Standard Online Payroll SystemDynamics Ax CipherLib: The Dynamics Ax CipherLib is a simple X.509 certificate based cipher implementation that allows to encrypt/decrypt S/MIME or XML messages with Dynamics Ax 4.0,GpsBox: We wanted to create a device which is sending the current position and any user is able to look up the current position of it.Ingenious Framework: Ingenious Framework is an easy to use, lightweight framework that hides semantic web technologies from you as a developer, but harnesses its benefits.Lab Of Things: Lab of Things is a flexible platform for experimental research that uses connected devices in homes. Orchard Deployment: Deployment and replication of content between one or more Orchard CMS instances. Move content individually, using workflows or custom subscriptions.PluginManagement.Net: .NET Plugin Loader Framework using MEF(Microsoft Extensibility Framework). It has a generic loader which loads plugin that implements generic interface IPlugin.QlikView Management API in vb.net: For more info see: http://community.qlikview.com/docs/DOC-3647 a conversion from c# to vb.net Recover Deleted Emails Microsoft Exchange Server: Get an effective way to recover deleted emails from Exchange server and browse it with MS Outlook or MS Exchange server depending upon the users requirement.Shindo's Race System: Special Edition: Shindo's Race System: Special EditionSP Solution Builder: Simple summary of project will be added latertestfailure0716: testTFS Build Custom Activities: TFS Build Custom extensions offers you a list of TFS build activities and a WorkFlow to use them.Upida.net: If you use Asp.net MVC and any NHibernate, than Upida is for you. Upida favors knockout.js. You can download example code, implemented with knockout.js.

  Read the article

• Can't get past the Ubuntu loading screen when installing

  - by Oscar Godson

  I'm trying to install Ubuntu 11.04 onto some custom made PC that my father in law tried building. It had Windows on it, but he wants Ubuntu so he asked me to do it. I've installed Ubuntu 11.04 on a few computers no issues, but on this computer I get to the all purple screen with the Ubuntu logo and the orange and white dots that light up. Like this: The fan is also super, super loud and sounds like the whole thing is going to explode and has been running like this for 15 mins ish. Then, after about 15 mins the dots stop animating from orange to white and usually just stick at all orange. Any ideas?

  Read the article

• How well do laptops with Nvidia Optimus work?

  - by DSJones

  I am considering buying a Dell XPS 15 laptop. The laptop has a nvidia 420m card which should work with linux but I keep reading about the Nvidia optimus technology that isn't supported on Linux. I am not really interested in switching from Nvidia to intel to save power but need to know that the Nvidia card will infact work if i installed Ubuntu. If anyone has experience usung a nvidia card with optimus technology or even better the exact laptop in question (Dell XPS 15 with 1GB NVIDIA® GeForce® GT 420M) it would be great. A major problem holding people back from adopting Linux is this sort of hardware issue. I am a long term Ubuntu user and supporter who can't afford to make a mistake with a purchase like this. I don't want to spend £500+ to find I have no graphics acceleration because Windows7 is not an option.

  Read the article

• Parabolic throw with set Height and range (libgdx)

  - by Tauboga

  Currently i'm working on a minigame for android where you have a rotating ball in the center of the display which jumps when touched in the direction of his current angle. I'm simply using a gravity vector and a velocity vector in this way: positionBall = positionBall.add(velocity); velocity = velocity.add(gravity); and velocity.x = (float) Math.cos(angle) * 12; /* 12 to amplify the velocity */ velocity.y = (float) Math.sin(angle) * 15; /* 15 to amplify the velocity */ That works fine. Here comes the problem: I want to make the jump look the same on all possible resolutions. The velocity needs to be scaled in a way that when the ball is thrown straight upwards it will touch the upper display border. When thrown directly left or right the range shall be exactly long enough to touch the left/right display border. Which formula(s) do I need to use and how to implement them correctly? Thanks in advance!

  Read the article

• Troubleshooting MySQL : can connect to localhost but not to 127.0.0.1 or IP

  - by mireille raad

  Hello, I'd appreciate some help on this, it is bit tricky to find the correct keywords to google :) Using PHP i am able to connect using the following connection string : $link = mysql_connect('localhost', 'wlek' , 'wlek'); but when i use 127.0.0.1 or 10.10.40.15 (self-IP), i am getting connection failed Could not connect: Can't connect to MySQL server on '10.10.40.15' (13) I used yum install mysql , yum install php yum install php-mysql 1 - is there anything more i should install for php ? 2 - any troubleshooting tips ? 3 - what keywords, links do u recommend | % | mir | xdb | | 10.10.40.15 | mir | xdb | | localhost | mir | xdb | [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql port=3306 bind-address=0.0.0.0 old_passwords=1 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid ~ appreciate it :)

  Read the article

• ResponseStatusLine protocol violation

  - by Tom Hines

  I parse/scrape a few web page every now and then and recently ran across an error that stated: "The server committed a protocol violation. Section=ResponseStatusLine".   After a few web searches, I found a couple of suggestions – one of which said the problem could be fixed by changing the HttpWebRequest ProtocolVersion to 1.0 with the command: 1: HttpWebRequest req = (HttpWebRequest)HttpWebRequest.Create(strURI); 2: req.ProtocolVersion = HttpVersion.Version10;   …but that did not work in my particular case.   What DID work was the next suggestion I found that suggested the use of the setting: “useUnsafeHeaderParsing” either in the app.config file or programmatically. If added to the app.config, it would be: 1: <!-- after the applicationSettings --> 2: <system.net> 3: <settings> 4: <httpWebRequest useUnsafeHeaderParsing ="true"/> 5: </settings> 6: </system.net>   If done programmatically, it would look like this: C++: 1: // UUHP_CPP.h 2: #pragma once 3: using namespace System; 4: using namespace System::Reflection; 5:   6: namespace UUHP_CPP 7: { 8: public ref class CUUHP_CPP 9: { 10: public: 11: static bool UseUnsafeHeaderParsing(String^% strError) 12: { 13: Assembly^ assembly = Assembly::GetAssembly(System::Net::Configuration::SettingsSection::typeid); //__typeof 14: if (nullptr==assembly) 15: { 16: strError = "Could not access Assembly"; 17: return false; 18: } 19:   20: Type^ type = assembly->GetType("System.Net.Configuration.SettingsSectionInternal"); 21: if (nullptr==type) 22: { 23: strError = "Could not access internal settings"; 24: return false; 25: } 26:   27: Object^ obj = type->InvokeMember("Section", 28: BindingFlags::Static | BindingFlags::GetProperty | BindingFlags::NonPublic, 29: nullptr, nullptr, gcnew array<Object^,1>(0)); 30:   31: if(nullptr == obj) 32: { 33: strError = "Could not invoke Section member"; 34: return false; 35: } 36:   37: FieldInfo^ fi = type->GetField("useUnsafeHeaderParsing", BindingFlags::NonPublic | BindingFlags::Instance); 38: if(nullptr == fi) 39: { 40: strError = "Could not access useUnsafeHeaderParsing field"; 41: return false; 42: } 43:   44: if (!(bool)fi->GetValue(obj)) 45: { 46: fi->SetValue(obj, true); 47: } 48:   49: return true; 50: } 51: }; 52: } C# (CSharp): 1: using System; 2: using System.Reflection; 3:   4: namespace UUHP_CS 5: { 6: public class CUUHP_CS 7: { 8: public static bool UseUnsafeHeaderParsing(ref string strError) 9: { 10: Assembly assembly = Assembly.GetAssembly(typeof(System.Net.Configuration.SettingsSection)); 11: if (null == assembly) 12: { 13: strError = "Could not access Assembly"; 14: return false; 15: } 16:   17: Type type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal"); 18: if (null == type) 19: { 20: strError = "Could not access internal settings"; 21: return false; 22: } 23:   24: object obj = type.InvokeMember("Section", 25: BindingFlags.Static | BindingFlags.GetProperty | BindingFlags.NonPublic, 26: null, null, new object[] { }); 27:   28: if (null == obj) 29: { 30: strError = "Could not invoke Section member"; 31: return false; 32: } 33:   34: // If it's not already set, set it. 35: FieldInfo fi = type.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic | BindingFlags.Instance); 36: if (null == fi) 37: { 38: strError = "Could not access useUnsafeHeaderParsing field"; 39: return false; 40: } 41:   42: if (!Convert.ToBoolean(fi.GetValue(obj))) 43: { 44: fi.SetValue(obj, true); 45: } 46:   47: return true; 48: } 49: } 50: }   F# (FSharp): 1: namespace UUHP_FS 2: open System 3: open System.Reflection 4: module CUUHP_FS = 5: let UseUnsafeHeaderParsing(strError : byref<string>) : bool = 6: // 7: let assembly : Assembly = Assembly.GetAssembly(typeof<System.Net.Configuration.SettingsSection>) 8: if (null = assembly) then 9: strError <- "Could not access Assembly" 10: false 11: else 12: 13: let myType : Type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal") 14: if (null = myType) then 15: strError <- "Could not access internal settings" 16: false 17: else 18: 19: let obj : Object = myType.InvokeMember("Section", BindingFlags.Static ||| BindingFlags.GetProperty ||| BindingFlags.NonPublic, null, null, Array.zeroCreate 0) 20: if (null = obj) then 21: strError <- "Could not invoke Section member" 22: false 23: else 24: 25: // If it's not already set, set it. 26: let fi : FieldInfo = myType.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic ||| BindingFlags.Instance) 27: if(null = fi) then 28: strError <- "Could not access useUnsafeHeaderParsing field" 29: false 30: else 31: 32: if (not(Convert.ToBoolean(fi.GetValue(obj)))) then 33: fi.SetValue(obj, true) 34: 35: // Now return true 36: true VB (Visual Basic): 1: Option Explicit On 2: Option Strict On 3: Imports System 4: Imports System.Reflection 5:   6: Public Class CUUHP_VB 7: Public Shared Function UseUnsafeHeaderParsing(ByRef strError As String) As Boolean 8:   9: Dim assembly As [Assembly] 10: assembly = [assembly].GetAssembly(GetType(System.Net.Configuration.SettingsSection)) 11:   12: If (assembly Is Nothing) Then 13: strError = "Could not access Assembly" 14: Return False 15: End If 16:   17: Dim type As Type 18: type = [assembly].GetType("System.Net.Configuration.SettingsSectionInternal") 19: If (type Is Nothing) Then 20: strError = "Could not access internal settings" 21: Return False 22: End If 23:   24: Dim obj As Object 25: obj = [type].InvokeMember("Section", _ 26: BindingFlags.Static Or BindingFlags.GetProperty Or BindingFlags.NonPublic, _ 27: Nothing, Nothing, New [Object]() {}) 28:   29: If (obj Is Nothing) Then 30: strError = "Could not invoke Section member" 31: Return False 32: End If 33:   34: ' If it's not already set, set it. 35: Dim fi As FieldInfo 36: fi = [type].GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic Or BindingFlags.Instance) 37: If (fi Is Nothing) Then 38: strError = "Could not access useUnsafeHeaderParsing field" 39: Return False 40: End If 41:   42: If (Not Convert.ToBoolean(fi.GetValue(obj))) Then 43: fi.SetValue(obj, True) 44: End If 45:   46: Return True 47: End Function 48: End Class   Technorati Tags: C++,CPP,VB,Visual Basic,F#,FSharp,C#,CSharp,ResponseStatusLine,protocol violation

  Read the article

• Apple actualise la gamme MacBook Pro

  Apple a renouvelé sa gamme de MacBook Pro. Ce qu'il faut retenir : Le MacBook Pro 13" gagne encore en autonomie, pouvant atteindre jusqu'à 10 heures. Il possède un processeur graphique NVidia 320M inconnu au catalogue NVidia. Il semblerait que ce soit un processeur graphique fait spécialement par NVidia à la demande d'Apple. Les MacBook Pro 15" et 17" accueille les nouveaux (peut on encore dire nouveaux ?) processeurs Intel Core i5 et i7. Du coup, ils embarquent également le processeur graphique Intel HD qui ne vaut rien par rapport au processeur Nvidia qui équipait la génération précédente. Mais elle est secondée par une carte NVidia GT330M, présentée comme étant 2 fois plus puissante que la NVidia 320M. C'est surtout le fait qu'il ne faille plus rien faire pour basculer d'une carte graphique à l'autre. Et ça, c'est vraiment bien. Apple propose également, en option, une dalle de 1680*1050 sur le 15". Ce qui est une excellente chose.

  Read the article

• C#: Handling Notifications: inheritance, events, or delegates?

  - by James Michael Hare

  Often times as developers we have to design a class where we get notification when certain things happen. In older object-oriented code this would often be implemented by overriding methods -- with events, delegates, and interfaces, however, we have far more elegant options. So, when should you use each of these methods and what are their strengths and weaknesses? Now, for the purposes of this article when I say notification, I'm just talking about ways for a class to let a user know that something has occurred. This can be through any programmatic means such as inheritance, events, delegates, etc. So let's build some context. I'm sitting here thinking about a provider neutral messaging layer for the place I work, and I got to the point where I needed to design the message subscriber which will receive messages from the message bus. Basically, what we want is to be able to create a message listener and have it be called whenever a new message arrives. Now, back before the flood we would have done this via inheritance and an abstract class: 1:  2: // using inheritance - omitting argument null checks and halt logic 3: public abstract class MessageListener 4: { 5: private ISubscriber _subscriber; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber) 11: { 12: _subscriber = subscriber; 13: _messageThread = new Thread(MessageLoop); 14: _messageThread.Start(); 15: } 16:  17: // user will override this to process their messages 18: protected abstract void OnMessageReceived(Message msg); 19:  20: // handle the looping in the thread 21: private void MessageLoop() 22: { 23: while(!_isHalted) 24: { 25: // as long as processing, wait 1 second for message 26: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 27: if(msg != null) 28: { 29: OnMessageReceived(msg); 30: } 31: } 32: } 33: ... 34: } It seems so odd to write this kind of code now. Does it feel odd to you? Maybe it's just because I've gotten so used to delegation that I really don't like the feel of this. To me it is akin to saying that if I want to drive my car I need to derive a new instance of it just to put myself in the driver's seat. And yet, unquestionably, five years ago I would have probably written the code as you see above. To me, inheritance is a flawed approach for notifications due to several reasons: Inheritance is one of the HIGHEST forms of coupling. You can't seal the listener class because it depends on sub-classing to work. Because C# does not allow multiple-inheritance, I've spent my one inheritance implementing this class. Every time you need to listen to a bus, you have to derive a class which leads to lots of trivial sub-classes. The act of consuming a message should be a separate responsibility than the act of listening for a message (SRP). Inheritance is such a strong statement (this IS-A that) that it should only be used in building type hierarchies and not for overriding use-specific behaviors and notifications. Chances are, if a class needs to be inherited to be used, it most likely is not designed as well as it could be in today's modern programming languages. So lets look at the other tools available to us for getting notified instead. Here's a few other choices to consider. Have the listener expose a MessageReceived event. Have the listener accept a new IMessageHandler interface instance. Have the listener accept an Action<Message> delegate. Really, all of these are different forms of delegation. Now, .NET events are a bit heavier than the other types of delegates in terms of run-time execution, but they are a great way to allow others using your class to subscribe to your events: 1: // using event - ommiting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private bool _isHalted = false; 6: private Thread _messageThread; 7:  8: // assign the subscriber and start the messaging loop 9: public MessageListener(ISubscriber subscriber) 10: { 11: _subscriber = subscriber; 12: _messageThread = new Thread(MessageLoop); 13: _messageThread.Start(); 14: } 15:  16: // user will override this to process their messages 17: public event Action<Message> MessageReceived; 18:  19: // handle the looping in the thread 20: private void MessageLoop() 21: { 22: while(!_isHalted) 23: { 24: // as long as processing, wait 1 second for message 25: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 26: if(msg != null && MessageReceived != null) 27: { 28: MessageReceived(msg); 29: } 30: } 31: } 32: } Note, now we can seal the class to avoid changes and the user just needs to provide a message handling method: 1: theListener.MessageReceived += CustomReceiveMethod; However, personally I don't think events hold up as well in this case because events are largely optional. To me, what is the point of a listener if you create one with no event listeners? So in my mind, use events when handling the notification is optional. So how about the delegation via interface? I personally like this method quite a bit. Basically what it does is similar to inheritance method mentioned first, but better because it makes it easy to split the part of the class that doesn't change (the base listener behavior) from the part that does change (the user-specified action after receiving a message). So assuming we had an interface like: 1: public interface IMessageHandler 2: { 3: void OnMessageReceived(Message receivedMessage); 4: } Our listener would look like this: 1: // using delegation via interface - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private IMessageHandler _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler.OnMessageReceived(msg); 28: } 29: } 30: } 31: } And they would call it by creating a class that implements IMessageHandler and pass that instance into the constructor of the listener. I like that this alleviates the issues of inheritance and essentially forces you to provide a handler (as opposed to events) on construction. Well, this is good, but personally I think we could go one step further. While I like this better than events or inheritance, it still forces you to implement a specific method name. What if that name collides? Furthermore if you have lots of these you end up either with large classes inheriting multiple interfaces to implement one method, or lots of small classes. Also, if you had one class that wanted to manage messages from two different subscribers differently, it wouldn't be able to because the interface can't be overloaded. This brings me to using delegates directly. In general, every time I think about creating an interface for something, and if that interface contains only one method, I start thinking a delegate is a better approach. Now, that said delegates don't accomplish everything an interface can. Obviously having the interface allows you to refer to the classes that implement the interface which can be very handy. In this case, though, really all you want is a method to handle the messages. So let's look at a method delegate: 1: // using delegation via delegate - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler(msg); 28: } 29: } 30: } 31: } Here the MessageListener now takes an Action<Message>.  For those of you unfamiliar with the pre-defined delegate types in .NET, that is a method with the signature: void SomeMethodName(Message). The great thing about delegates is it gives you a lot of power. You could create an anonymous delegate, a lambda, or specify any other method as long as it satisfies the Action<Message> signature. This way, you don't need to define an arbitrary helper class or name the method a specific thing. Incidentally, we could combine both the interface and delegate approach to allow maximum flexibility. Doing this, the user could either pass in a delegate, or specify a delegate interface: 1: // using delegation - give users choice of interface or delegate 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // passes the interface method as a delegate using method group 19: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 20: : this(subscriber, handler.OnMessageReceived) 21: { 22: } 23:  24: // handle the looping in the thread 25: private void MessageLoop() 26: { 27: while(!_isHalted) 28: { 29: // as long as processing, wait 1 second for message 30: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 31: if(msg != null) 32: { 33: _handler(msg); 34: } 35: } 36: } 37: } } This is the method I tend to prefer because it allows the user of the class to choose which method works best for them. You may be curious about the actual performance of these different methods. 1: Enter iterations: 2: 1000000 3:  4: Inheritance took 4 ms. 5: Events took 7 ms. 6: Interface delegation took 4 ms. 7: Lambda delegate took 5 ms. Before you get too caught up in the numbers, however, keep in mind that this is performance over over 1,000,000 iterations. Since they are all < 10 ms which boils down to fractions of a micro-second per iteration so really any of them are a fine choice performance wise. As such, I think the choice of what to do really boils down to what you're trying to do. Here's my guidelines: Inheritance should be used only when defining a collection of related types with implementation specific behaviors, it should not be used as a hook for users to add their own functionality. Events should be used when subscription is optional or multi-cast is desired. Interface delegation should be used when you wish to refer to implementing classes by the interface type or if the type requires several methods to be implemented. Delegate method delegation should be used when you only need to provide one method and do not need to refer to implementers by the interface name.

  Read the article

• Install VLC 2.0.7 in CentOS 6.4?

  - by raaz

  I am keep failing in the installation process I have tried. I have started process as follows. yum install gcc dbus-glib-devel* lua-devel* libcddb wget http://download.videolan.org/pub/videolan/vlc/2.0.7/vlc-2.0.7.tar.xz tar -xf vlc-2.0.7.tar.xz && cd vlc-2.0.7 ./configure in the configure I am getting the error as follows configure: WARNING: No package 'libcddb' found: CDDB access disabled. checking for Linux DVB version 5... yes checking for DVBPSI... no checking gme/gme.h usability... no checking gme/gme.h presence... no checking for gme/gme.h... no checking for SID... no configure: WARNING: No package 'libsidplay2' found (required for sid). checking for OGG... no configure: WARNING: Library ogg >= 1.0 needed for ogg was not found checking for MUX_OGG... no configure: WARNING: Library ogg >= 1.0 needed for mux_ogg was not found checking for SHOUT... no configure: WARNING: Library shout >= 2.1 needed for shout was not found checking ebml/EbmlVersion.h usability... no checking ebml/EbmlVersion.h presence... no checking for ebml/EbmlVersion.h... no checking for LIBMODPLUG... no configure: WARNING: No package 'libmodplug' found No package 'libmodplug' found. checking mpc/mpcdec.h usability... no checking mpc/mpcdec.h presence... no checking for mpc/mpcdec.h... no checking mpcdec/mpcdec.h usability... no checking mpcdec/mpcdec.h presence... no checking for mpcdec/mpcdec.h... no checking for libcrystalhd/libcrystalhd_if.h... no checking mad.h usability... no checking mad.h presence... no checking for mad.h... no configure: error: Could not find libmad on your system: you may get it from http://www.underbit.com/products/mad/. Alternatively you can use --disable-mad to disable the mad plugin. [root@localhost vlc-2.0.7]# So I went to libmad http location and downloaded it and while doing make it gave me the errors.There are no errors at ./configure with libmad but make not going through. [root@localhost libmad-0.15.0b]# make (sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b' \ -e 's/^.*/ *&/' ./COPYRIGHT; echo; \ echo "# ifdef __cplusplus"; \ echo 'extern "C" {'; \ echo "# endif"; echo; \ if [ ".-DFPM_INTEL" != "." ]; then \ echo ".-DFPM_INTEL" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h make all-recursive make[1]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' make[2]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF ".deps/version.Tpo" \ -c -o version.lo `test -f 'version.c' || echo './'`version.c; \ then mv -f ".deps/version.Tpo" ".deps/version.Plo"; \ else rm -f ".deps/version.Tpo"; exit 1; \ fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -fPIC -DPIC -o .libs/version.lo cc1: error: unrecognized command line option "-fforce-mem" make[2]: *** [version.lo] Error 1 make[2]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make: *** [all] Error 2 how can i resolve the issue and install VLC in my Centos ? I am using CentOS 6.4 . Thank you.

  Read the article

• Supertuxkart not able to start

  - by subeh.sharma

  Was working fine before i played around with NVIDIA drivers and ended up with this problem. I tried running it through the terminal and i see these messages: subsharm@subsharm-ThinkPad-T61:~$ supertuxkart Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [FileManager] Data files will be fetched from: '/usr/share/games/supertuxkart/' [IrrDriver] Creating NULL device Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [IrrDriver] Trying OpenGL rendering. [IrrDriver] Tring to create device with 32 bits Xlib: extension "GLX" missing on display ":0.0". [IrrDriver Temp Logger] Level 1: No GLX support available. OpenGL driver will not work. [IrrDriver Temp Logger] Level 2: Fatal error, could not get visual. Segmentation fault subsharm@subsharm-ThinkPad-T61:~$ sudo Xorg -configure [sudo] password for subsharm: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.

  Read the article

• Wireless Problem on HP Pavillion G6

  - by user47954

  I have a broadcom wireless card in my laptop and the wireless is not working correctly. right in front of the router the wireless signal is 70% and across the room it barely works and in another room it disconnects. i have the drivers and everything. i am running ubuntu 11.10 64bit.it works perfectly in windows 7. can anyone help! 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9649] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7804] Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) Kernel modules: i2c-piix4 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a0] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a1] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a2] Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Kernel driver in use: r8169 Kernel modules: r8169 07:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Kernel driver in use: wl Kernel modules: wl 08:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)

  Read the article

• Physics in carrom like game using cocos2d + Box2D

  - by Raj

  I am working on carrom like game using cocos2d + Box2D. I set world gravity(0,0), want gravity in z-axis. I set following values for coin and striker body: Coin body (circle with radius - 15/PTM_RATIO): density = 20.0f; friction = 0.4f; restitution = 0.6f; Striker body (circle with radius - 15/PTM_RATIO): density = 25.0f; friction = 0.6f; restitution = 0.3f; Output is not smooth. When I apply ApplyLinearImpulse(force,position) the coin movement looks like floating in the air - takes too much time to stop. What values for coin and striker make it look like real carrom?

  Read the article

• Oracle Enterprise Data Quality - Geared Up and Ready for OpenWorld 2012

  - by Mala Narasimharajan

  10 days and counting till Oracle OpenWorld 2012 is upon us.  Enterprise data quality is key to every information integration and consolidation initiative. At this year's OpenWorld, hear how Oracle Enterprise Data Quality provides the critical piece to achieving trusted, reliable master data and increases the value of data integration initiatives. Here are the different ways you can learn and experience Enterprise Data Quality at OpenWorld:  Conference sessions: Oracle Enterprise Data Quality: Product Overview and Roadmap - Monday 10/1/12, 1:45-2:45 PM - Moscone West - 3006 Data Preparation and Ongoing Governance with the Oracle Enterprise Data Quality Platform - Wednesday 10/3/2012, 1:15-2:15 PM - Moscone West - 3000  Data Acquisition, Migration and Integration with the Oracle Enterprise Data Quality Platform - Thursday 10/4/2012, 12:45-1:45 PM - Moscone West - 3005  Hands on Labs: Introduction to Oracle Enterprise Data Quality Platform -  Monday 10/2/2012, 4:45-5:45 PM - Marriot Marquis - Salon 1/2 Demos:  Trusted Data with Oracle Enterprise Data Quality - Moscone South, Right - S-243 (note: proceed to Middleware Demo grounds) For a list of Master Data Management and Data Quality sessions and other events click here. 

  Read the article

• CodePlex Daily Summary for Wednesday, July 17, 2013

  CodePlex Daily Summary for Wednesday, July 17, 2013Popular Releases#Zyan Communication Framework: Zyan 2.5: Zyan 2.5 NuGet package Project descriptionZyan is an easy to use distributed application framework for .NET, Mono and Android. With Zyan you can publish any .NET class for remote access over network. [en] What's new in Zyan 2.5: Android platform support via Mono for Android (#1828) Tested with Mono for Android v4.7.9, should work on stable v4.6.x The following restrictions apply to Android version of the library: Only duplex TCP channel is supported MEF integration is not available Re...Install Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0WatchersNET.SiteMap: WatchersNE​T.SiteMap 01.03.08: changes Localized Tab Name is now usedGoAgent GUI: GoAgent GUI 1.1.0 ???: ???????，??????????????，?????????????? ???????? ????： 1．1．0? ??? ?????????? ????????? ??：??cn/hk????，?????????????????????。Hosts??????google_hk。Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...TypePipe: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of the TypePipe for .NET 4.5. Find the complete release notes for the build here: Release Notes.re-linq: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of re-linq for .NET 4.5. Find the complete release notes for the build here: Release Notes To use re-linq with .NET 3.5, use a 1.13.x build.Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130713): Product documentation and additional templates for this version is included in the zip archive, or if you want individual files, visit the http://www.carrotware.com website. Templates, in addition to those found in the download, can be downloaded individually from the website as well. If you are coming from earlier versions, make a precautionary backup of your existing website files and database. When installing the update, the database update engine will create the new schema items (if you...Dalmatian Build Script: Dalmatian Build 0.1.3.0: -Minor bug fixes -Added Choose<T> and ChooseYesNo to Console objectPushover.NET: Pushover.NET - Stable Release 10 July 2013: This is the first stable release of Pushover.NET. It includes 14 overloads of the SendNotification method, giving you total flexibility of sending Pushover notifications from your client. Assembly is built to .NET 2.x so it can be called from .NET 2.x, 3.x and 4.x projects. Also available is the Test Harness. This is a small GUI that you can use to test calls to Pushover.NET's main DLL. It's almost fully functional--the sound effects haven't been fully configured so no matter what you pick ...MCEBuddy 2.x: MCEBuddy 2.3.14: 2.3.14 BETA is available through the Early Access Program.Click here https://mcebuddy2x.codeplex.com/discussions/439439 for details and to get access to Early Access Program to download latest releases. Changelog for 2.3.14 (32bit and 64bit) NEW FEATURES: 1. ENHANCEMENTS: 2. Improved eMail notifications 3. Improved metrics details 4. Support for larger history (INI) file (about 45,000 sections, each section can have about 1500 entries) BUG FIXES: 5. Fix for extracting Movie release year from...Azure Depot: Flask: Flask Version 01New ProjectsCalculator AION: This is product for gamers of MMORPG "AION".Close a ChildWindow by its Overlay: The fastest and proven solution to make you ChildWindows closed by its overlay.CodeColorizer: Colorize source code. EngWorx: This project uses a layered software architecture based on: - ASP.NET MVC (with Razor) - JQuery - WCF - EntityFramework eXpandframework: eXpand is the first open source project based on the DevExpress eXpressApp Framework (XAF). The eXpressApp Framework ships with DXperience Universal Green Tights: Wiki clone by WebMatrix 3 & ASP.NET Web Pages 2Had: HadJXR Picturase: JXR Picturase helps your not-supporting browsers to properly digest JPEG XR-encoded pictures so that you can actually see them.Neblus OS: A project hosted by Atsoft to develop a free GUI OS which is user friendly and easy to use. Based on COSMOS project. Website: http://www.atsoftc.weebly.comProduct Code Validator: This project aims to facilitate the validation of product codes such as EANs (European Product Code), ASINs (Amazon Standard Identification Number) and ISBNs.SCORMLMS elearning system: ScormLMS is E-learning system with a SCORM 2004 standard compliance smoketestgit1: smoketestgit1smoketesthg: smoketesthgsmoketesttfs: smoketesttfsSP Admin Toolkit: The SPAdminToolkit is designed to collect information from various parts of your SharePoint farm and then save this data to a number of SharePoint lists.SpaceSync: Cool demo of UDP multicast and XNA in Windows Phone 7. Use two phones connected to the same Wi-fi network. The ships rotate in sync in both phones. tDonkey: Website for scheduling courses at the Techniontest123: acdafasdfasfasdfasfadsdfasdftestpro: sdfsdfUITestingHelpers: The project delivers a collection of C # helpers for automated testing of applications.VSIX Editor: VSIX Editor is a small handy tool to quickly tweak your Visual Studio Extension Packages.????????????: tasktimer???????????????，??????????，??????????，??????，?????。

  Read the article

• monitor screen dead.....not even shows bios screen

  - by megatronous

  Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

  Read the article

• Working with packed dates in SSIS

  - by Jim Giercyk

  One of the challenges recently thrown my way was to read an EBCDIC flat file, decode packed dates, and insert the dates into a SQL table.  For those unfamiliar with packed data, it is a way to store data at the nibble level (half a byte), and was often used by mainframe programmers to conserve storage space.  In the case of my input file, the dates were 2 bytes long and  represented the number of days that have past since 01/01/1950.  My first thought was, in the words of Scooby, Hmmmmph?  But, I love a good challenge, so I dove in. Reading in the flat file was rather simple.  The only difference between reading an EBCDIC and an ASCII file is the Code Page option in the connection manager.  In my case, I needed to use Code Page 1140 for EBCDIC (I could have also used Code Page 37).       Once the code page is set correctly, SSIS can understand what it is reading and it will convert the output to the default code page, 1252.  However, packed data is either unreadable or produces non-alphabetic characters, as we can see in the preview window.   Column 1 is actually the packed date, columns 0 and 2 are the values in the rest of the file.  We are only interested in Column 1, which is a 2 byte field representing a packed date.  We know that 2 bytes of packed data can be stored in 1 byte of character data, so we are working with 4 packed digits in 2 character bytes.  If you are confused, stay tuned….this will make sense in a minute.   Right-click on your Flat File Source shape and select “Show Advanced Editor”. Here is where the magic begins. By changing the properties of the output columns, we can access the packed digits from each byte. By default, the Output Column data type is DT_STR. Since we want to look at the bytes individually and not the entire string, change the data type to DT_BYTES. Next, and most important, set UseBinaryFormat to TRUE. This will write the HEX VALUES of the output string instead of writing the character values.  Now we are getting somewhere! Next, you will need to use a Data Conversion shape in your Data Flow to transform the 2 position byte stream to a 4 position Unicode string containing the packed data.  You need the string to be 4 bytes long because it will contain the 4 packed digits.  Here is what that should look like in the Data Conversion shape: Direct the output of your data flow to a test table or file to see the results.  In my case, I created a test table.  The results looked like this:     Hold on a second!  That doesn't look like a date at all.  No, of course not.  It is a hex number which represents the days which have passed between 01/01/1950 and the date.  We have to convert the Hex value to a decimal value, and use the DATEADD function to get a date value.  Luckily, I have created a function to convert Hex to Decimal:   -- ============================================= -- Author:        Jim Giercyk -- Create date: March, 2012 -- Description:    Converts a Hex string to a decimal value -- ============================================= CREATE FUNCTION [dbo].[ftn_HexToDec] (     @hexValue NVARCHAR(6) ) RETURNS DECIMAL AS BEGIN     -- Declare the return variable here DECLARE @decValue DECIMAL IF @hexValue LIKE '0x%' SET @hexValue = SUBSTRING(@hexValue,3,4) DECLARE @decTab TABLE ( decPos1 VARCHAR(2), decPos2 VARCHAR(2), decPos3 VARCHAR(2), decPos4 VARCHAR(2) ) DECLARE @pos1 VARCHAR(1) = SUBSTRING(@hexValue,1,1) DECLARE @pos2 VARCHAR(1) = SUBSTRING(@hexValue,2,1) DECLARE @pos3 VARCHAR(1) = SUBSTRING(@hexValue,3,1) DECLARE @pos4 VARCHAR(1) = SUBSTRING(@hexValue,4,1) INSERT @decTab VALUES (CASE               WHEN @pos1 = 'A' THEN '10'                 WHEN @pos1 = 'B' THEN '11'               WHEN @pos1 = 'C' THEN '12'               WHEN @pos1 = 'D' THEN '13'               WHEN @pos1 = 'E' THEN '14'               WHEN @pos1 = 'F' THEN '15'               ELSE @pos1              END, CASE               WHEN @pos2 = 'A' THEN '10'                 WHEN @pos2 = 'B' THEN '11'               WHEN @pos2 = 'C' THEN '12'               WHEN @pos2 = 'D' THEN '13'               WHEN @pos2 = 'E' THEN '14'               WHEN @pos2 = 'F' THEN '15'               ELSE @pos2              END, CASE               WHEN @pos3 = 'A' THEN '10'                 WHEN @pos3 = 'B' THEN '11'               WHEN @pos3 = 'C' THEN '12'               WHEN @pos3 = 'D' THEN '13'               WHEN @pos3 = 'E' THEN '14'               WHEN @pos3 = 'F' THEN '15'               ELSE @pos3              END, CASE               WHEN @pos4 = 'A' THEN '10'                 WHEN @pos4 = 'B' THEN '11'               WHEN @pos4 = 'C' THEN '12'               WHEN @pos4 = 'D' THEN '13'               WHEN @pos4 = 'E' THEN '14'               WHEN @pos4 = 'F' THEN '15'               ELSE @pos4              END) SET @decValue = (CONVERT(INT,(SELECT decPos4 FROM @decTab)))         +                 (CONVERT(INT,(SELECT decPos3 FROM @decTab))*16)      +                 (CONVERT(INT,(SELECT decPos2 FROM @decTab))*(16*16)) +                 (CONVERT(INT,(SELECT decPos1 FROM @decTab))*(16*16*16))     RETURN @decValue END GO     Making use of the function, I found the decimal conversion, added that number of days to 01/01/1950 and FINALLY arrived at my “unpacked relative date”.  Here is the query I used to retrieve the formatted date, and the result set which was returned: SELECT [packedDate] AS 'Hex Value',        dbo.ftn_HexToDec([packedDate]) AS 'Decimal Value',        CONVERT(DATE,DATEADD(day,dbo.ftn_HexToDec([packedDate]),'01/01/1950'),101) AS 'Relative String Date'   FROM [dbo].[Output Table]         This technique can be used any time you need to retrieve the hex value of a character string in SSIS.  The date example may be a bit difficult to understand at first, but with SSIS becoming the preferred tool for enterprise level integration for many companies, there is no doubt that developers will encounter these types of requirements with regularity in the future. Please feel free to contact me if you have any questions.

  Read the article

• I'm doing hobby programming; what programming methodologies (e.g. XP, Agile...) do you recommend me to read up on?

  - by Anto

  Most of you would probably just call me a kid (I'm 15). I'm doing hobby programming (I started fiddling around with ActionScript 2.0 in Flash 8 when I was 11, now I do mostly C, Python and Java). As I'm 15, I won't get a job for a long period of time (I'm going to spend years in academia before that) and thus this question is not about which programming methodologies you recommend me to read up on for a software engineering job, but instead which methodologies should a hobby programmer read about? What will a hobby developer learn from reading about your recommendation(s)?

  Read the article

• Smooth animation when using fixed time step

  - by sythical

  I'm trying to implement the game loop where the physics is independent from rendering but my animation isn't as smooth as I would like it to be and it seems to periodically jump. Here is my code: // alpha is used for interpolation double alpha = 0, counter_old_time = 0; double accumulator = 0, delta_time = 0, current_time = 0, previous_time = 0; unsigned frame_counter = 0, current_fps = 0; const unsigned physics_rate = 40, max_step_count = 5; const double step_duration = 1.0 / 40.0, accumulator_max = step_duration * 5; // information about the circ;e (position and velocity) int old_pos_x = 100, new_pos_x = 100, render_pos_x = 100, velocity_x = 60; previous_time = al_get_time(); while(true) { current_time = al_get_time(); delta_time = current_time - previous_time; previous_time = current_time; accumulator += delta_time; if(accumulator > accumulator_max) { accumulator = accumulator_max; } while(accumulator >= step_duration) { if(new_pos_x > 1330) velocity_x = -15; else if(new_pos_x < 70) velocity_x = 15; old_pos_x = new_pos_x; new_pos_x += velocity_x; accumulator -= step_duration; } alpha = accumulator / static_cast<double>(step_duration); render_pos_x = old_pos_x + (new_pos_x - old_pos_x) * alpha; al_clear_to_color(al_map_rgb(20, 20, 40)); // clears the screen al_draw_textf(font, al_map_rgb(255, 255, 255), 20, 20, 0, "current_fps: %i", current_fps); // print fps al_draw_filled_circle(render_pos_x, 400, 15, al_map_rgb(255, 255, 255)); // draw circle // I've added this to test how the program will behave when rendering takes // considerably longer than updating the game. al_rest(0.008); al_flip_display(); // swaps the buffers frame_counter++; if(al_get_time() - counter_old_time >= 1) { current_fps = frame_counter; frame_counter = 0; counter_old_time = al_get_time(); } } I have added a pause during the rendering part because I wanted to see how the code would behave when a lot of rendering is involved. Removing it makes the animation smooth but then I'll have to make sure that I don't let the frame rate drop too much and that doesn't seem like a good solution. I've been trying to fix this for a week and have had no luck so I'd be very grateful if someone can read through my code. Thank you! Edit: I added the following code to work out the actual velocity (pixels per second) of the ball each time the ball is rendered and surprisingly it's not constant so I'm guessing that's the issue. I'm not sure why it's not constant. alpha = accumulator / static_cast<double>(step_duration); render_pos_x = old_pos_x + (new_pos_x - old_pos_x) * alpha; cout << (render_pos_x - old_render_pos) / delta_time << endl; old_render_pos = render_pos_x;

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >