Search Results

Search found 25570 results on 1023 pages for 'low level api'.

Page 61/1023 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Career guidance/advice for Junior-level Software Engineer [closed]

    - by John Do
    I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • How to properly position 3rd level menu [migrated]

    - by drewrowalnd
    If you look here: http://snippetmagazine.com/ under about isl-board of trustees you can se I have created a third level dropdown, but how can I properly align that drop down? Below you will see my css. #menudiv { width: 999px; float: left; clear: left; height: 250px; background: url(images/top_bg.png) no-repeat; margin-top: 10px; } mainmenu { width: 948px; height: 63px; float: left; margin-left: 16px; margin-top:5px; border: 1px solid #D5D5D5; -moz-border-radius: 3px; -webkit-border-radius: 3px; -webkit-box-shadow: 0px 1px 2px rgba(0, 0, 0, 0.1); -moz-box-shadow: 0px 1px 2px rgba(0, 0, 0, 0.1); background:url(images/nav_bg.gif) repeat; } .mainnav { margin: 0; padding: 0; list-style: none; } .mainnav * { margin: 0; padding: 0; list-style: none; } .mainnav ul { position: absolute; top: -999em; display: none; } .mainnav li { float: left; position: relative; z-index: 999; height: 63px; line-height: 55px; margin-right: 0px; border-right: 1px solid #D5D5D5; } .mainnav li.last { border-right: none; } .mainnav a { display: block; font-size: 19px; margin: 0; color: #cc9900; font-family: Copperplate, Arial, Helvetica, Sans serif; font-weight:600; text-decoration: none; padding: 3px 13px 3px 12px; color: #555; text-shadow: 0 1px 1px white; } .mainnav li:hover { text-decoration: none; border-bottom: solid 0px #ccc; background: white; } .mainnav ul li{ width: 132px; } .mainnav li:hover ul, ul.mainnav li.sfHover ul { left: 0px; top: 50px; padding-top: 0px; width: 132px; border-bottom: solid 0px #eaeaea; background: url(images/nav_dropdown_shadow.gif) repeat-x top; padding: 6px 0 0px 0px; margin: 13px 0 0 -1px; border: 1px solid #D5D5D5; -moz-border-radius-bottomleft: 3px; -webkit-border-bottom-left-radius: 3px; -moz-border-radius-bottomright: 3px; -webkit-border-bottom-right-radius: 3px; -webkit-box-shadow: 0px 1px 3px rgba(0, 0, 0, 0.1); -moz-box-shadow: 0px 1px 3px rgba(0, 0, 0, 0.1); width: 175px; border-bottom-left-radius: 3px 3px; border-bottom-right-radius: 3px 3px; } .mainnav li:hover li ul, .mainnav li.sfHover li ul { top: -999em; } .mainnav li li:hover ul, ul.mainnav li li.sfHover ul { left: 132px; top: -8px; } .mainnav li:hover ul, .mainnav li li:hover ul { top: -999em; } .mainnav li li { color: #555; display: block; padding: 0px; height: auto !important; border: none; width:175px; background: url(images/nav_dropdown_bg.gif) repeat; margin: 0; } .mainnav li li a:link, .mainnav li li a:visited { display: block; height: auto !important; line-height: 30px; color: #333; font-weight: normal; font-family: arial, helvetica, sans-serif; font-size: 12px; border: none; margin: 0; padding-left: 10px; overflow:hidden; border-bottom: 1px solid #E3E3E3; } .mainnav li li :hover{ } .mainnav li li a:hover { background: none; color:#555 ; border-bottom: 1px solid #E3E3E3; }

    Read the article

  • API Failure Sqlite

    - by Joseph Anderson
    I ran the Windows 8 App Certification Kit on my app and it says it will fail because of Sqllite. Am I referencing code incorrectly or can I ignore this problem? Here is the response: Impact if not fixed: Using an API that is not part of the Windows SDK for Windows Store apps violates the Windows Store certification requirements. API __CppXcptFilter in msvcr110.dll is not supported for this application type. sqlite3.dll calls this API. API __clean_type_info_names_internal in msvcr110.dll is not supported for this application type. sqlite3.dll calls this API. API __crtTerminateProcess in msvcr110.dll is not supported for this application type. sqlite3.dll calls this API. API __crtUnhandledException in msvcr110.dll is not supported for this application type. sqlite3.dll calls this API. I am referencing this file: SQLite for Windows Runtime SQLite.WinRT, Version=3.7.14 C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0\ExtensionSDKs\SQLite.WinRT\3.7.14\ In my Windows 8 Metro app using XAML.

    Read the article

  • The Coolest Parts of Windows API

    - by Andreas Rejbrand
    I have noticed that there are quite a few community wikis about "Tips & Tricks" or "Hidden Features" in programming languages and APIs here at Stack Overflow. But I could not find any about my own personal favourites: Win32 API and Delphi. Therefore I start my "own" CW about Win32 API. There are (at least) two kinds of Win API users: those that have been brought up using Windows API in C/C++, and those that have been brought up using some level of abstraction above the Windows API. I belong to the latter category, being brought up using Delphi's VCL. But over the last five years, I have become increasingly interested in the underlaying API of the Windows operating system, and today I work a lot with it. Depending on which category a programmer belongs to, he (or possibly she) will think that different things are "cool" in the Windows API. For instance, whereas a VCL-brought up developer might think it it very cool to var errIcon: HICON; begin errIcon := LoadIcon(0, IDI_ERROR); DrawIcon(Canvas.Handle, 10, 10, errIcon), a programmer brought up using Windows API in C will not be as impressed. But no matter how you are "brought up": what are the coolest "tricks" in Windows API? I start by listing a few of my own favourites, some of which are more "cool" than "useful", though: LoadIcon and MessageBeep can load/play system default icons and sounds. Open the CD tray: mciSendString('Set cdaudio door open wait', nil, 0, 0); Fade out the screen (Windows Vista and later) and turn of the monitor: SendMessage(Application.Handle, WM_SYSCOMMAND, SC_MONITORPOWER, 2); GetWindowDC(GetDesktopWindow) returns the DC of the desktop.

    Read the article

  • Google appEngine: 404 when accesing /_ah/api

    - by jfu
    I try to build a very simple GAE application, using eclipse and the Google Plugin for Eclipse. I've generated some Endpoint from an @Entity class, then I've generated Cloud Endpoint Client library. After that I've started the appEngine project (within eclipse, on the embedded jetty server). When I try to access /_ah/api I get the following issue: HTTP ERROR 500 Problem accessing /_ah/api/. Reason: Failed to retrieve API configs with status: 404 Caused by: java.io.IOException: Failed to retrieve API configs with status: 404 at com.google.api.server.spi.tools.devserver.ApiServlet.getApiConfigSources(ApiServlet.java:102) at com.google.api.server.spi.tools.devserver.ApiServlet.initConfigsIfNecessary(ApiServlet.java:67) at com.google.api.server.spi.tools.devserver.RestApiServlet.service(RestApiServlet.java:117) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:511) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1166) at com.google.appengine.api.socket.dev.DevSocketFilter.doFilter(DevSocketFilter.java:74) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.tools.development.ResponseRewriterFilter.doFilter(ResponseRewriterFilter.java:123) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.tools.development.HeaderVerificationFilter.doFilter(HeaderVerificationFilter.java:34) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:63) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:125) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.tools.development.DevAppServerModulesFilter.doDirectRequest(DevAppServerModulesFilter.java:368) at com.google.appengine.tools.development.DevAppServerModulesFilter.doDirectModuleRequest(DevAppServerModulesFilter.java:351) at com.google.appengine.tools.development.DevAppServerModulesFilter.doFilter(DevAppServerModulesFilter.java:116) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:388) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:418) What am I doing wrong?

    Read the article

  • How can i get more low memory with the following setup:

    - by user539484
    Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- MSDOS 14 317 (14K) 14 317 (14K) 0 (0K) HIMEM 1 120 (1K) 1 120 (1K) 0 (0K) EMM386 3 120 (3K) 3 120 (3K) 0 (0K) OAKCDROM 36 064 (35K) 36 064 (35K) 0 (0K) POWER 80 (0K) 80 (0K) 0 (0K) NLSFUNC 2 784 (3K) 2 784 (3K) 0 (0K) COMMAND 2 928 (3K) 2 928 (3K) 0 (0K) MSCDEX 15 712 (15K) 15 712 (15K) 0 (0K) SMARTDRV 30 384 (30K) 13 984 (14K) 16 400 (16K) KEYB 6 752 (7K) 6 752 (7K) 0 (0K) MOUSE 17 296 (17K) 17 296 (17K) 0 (0K) DISPLAY 8 336 (8K) 0 (0K) 8 336 (8K) SETVER 512 (1K) 0 (0K) 512 (1K) DOSKEY 4 144 (4K) 0 (0K) 4 144 (4K) POWER 4 672 (5K) 0 (0K) 4 672 (5K) Free 552 944 (540K) 539 088 (526K) 13 856 (14K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 653 312 114 224 539 088 Upper 47 920 34 064 13 856 Reserved 0 0 0 Extended (XMS)* 64 898 256 2 671 824 62 226 432 ---------------- ---------- ---------- ---------- Total memory 65 599 488 2 820 112 62 779 376 Total under 1 MB 701 232 148 288 552 944 Total Expanded (EMS) 33 947 648 (33 152K Free Expanded (EMS)* 33 538 048 (32 752K * EMM386 is using XMS memory to simulate EMS memory as needed. Free EMS memory may change as free XMS memory changes. Largest executable program size 538 976 (526K) Largest free upper memory block 7 488 (7K) MS-DOS is resident in the high memory area. I'm running MS-DOS 6.22 on VMWare virtual hardware. This is memory state after memmaker pass, so i'm looking for optimization beyond memmaker. Note: NLS drivers (DISPLAY, KEYB, NSLFUNC) are essential for me. Thanks to @mtone for valuable reminder about MSCDEX /E which gave me 16KiB of low memory (see the diff)!

    Read the article

  • Pinging switch results in alternating high/low response times

    - by Paul Pringle
    We have two switches that are behaving strangely. When I ping them the responses alternate between high and low results: C:\Users\paul>ping sw-linksys1 -t Pinging sw-linksys1.sep.com [172.16.254.235] with 32 bytes of data: Reply from 172.16.254.235: bytes=32 time=39ms TTL=64 Reply from 172.16.254.235: bytes=32 time=154ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=142ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=143ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=146ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=152ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=153ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=153ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Other switches in the network behave normally. I've rebooted the switches, but the behavior still is there with the ping. Any ideas on how to troubleshoot this? Thanks!

    Read the article

  • Incredble low disk performance on HP DL385 G7

    - by 3molo
    Hi, As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 configurations. I run Vmware ESXi 4.1. Problem: Even with one virtual machine only, tried Linux 2.6/Windows server 2008/Windows 7, the VMs' feel really sluggish. With windows 7, the vmware converter installation even timed out. Tried both SATA and SAS disks and SATA disks are nearly unsusable, while SAS disks feels extremely slow.I can't see a lot of disk activity in the infrastructure client, but I haven't been looking for causes or even tried diagnostics because I have a feeling that it's either because of the cheap raid controller - or simply because of the lack of memory for it. Despite the problems, I continued and installed a virtual machine that serves a key function, so it's not easy to take it down and run diagnostics. Would very much like to know what you guys have to say of it, is it more likely to be a problem with the controller/disks or is it low performance because of budget components? Thanks in advance,

    Read the article

  • Low-traffic WordPress website on Apache keeps crashing server

    - by OC2PS
    I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

    Read the article

  • Low Voting {API(Five Star)} Feedback

    - by D.J.
    Is there any module in drupal which provides low rating feedback. eg If someone wants to vote a content as <= 2 (out of 5). Before he does so, there will be a pop up window displaying text "Are you sure you want to rate so low?" etc. If there is no such module then is there any easy way of doing it?

    Read the article

  • Using Apache FOP from .NET level

    - by Lukasz Kurylo
    In one of my previous posts I was talking about FO.NET which I was using to generate a pdf documents from XSL-FO. FO.NET is one of the .NET ports of Apache FOP. Unfortunatelly it is no longer maintained. I known it when I decidec to use it, because there is a lack of available (free) choices for .NET to render a pdf form XSL-FO. I hoped in this implementation I will find all I need to create a pdf file with my really simple requirements. FO.NET is a port from some old version of Apache FOP and I found really quickly that there is a lack of some features that I needed, like dotted borders, double borders or support for margins. So I started to looking for some alternatives. I didn’t try the NFOP, another port of Apache FOP, because I found something I think much more better, the IKVM.NET project.   IKVM.NET it is not a pdf renderer. So what it is? From the project site:   IKVM.NET is an implementation of Java for Mono and the Microsoft .NET Framework. It includes the following components: a Java Virtual Machine implemented in .NET a .NET implementation of the Java class libraries tools that enable Java and .NET interoperability   In the simplest form IKVM.NET allows to use a Java code library in the C# code and vice versa.   I tried to use an Apache FOP, the best I think open source pdf –> XSL-FO renderer written in Java from my project written in C# using an IKVM.NET and it work like a charm. In the rest of the post I want to show, how to prepare a .NET *.dll class library from Apache FOP *.jar’s with IKVM.NET and generate a simple Hello world pdf document.   To start playing with IKVM.NET and Apache FOP we need to download their packages: IKVM.NET Apache FOP and then unpack them.   From the FOP directory copy all the *.jar’s files from lib and build catalogs to some location, e.g. d:\fop. Second step is to build the *.dll library from these files. On the console execute the following comand:   ikvmc –target:library –out:d:\fop\fop.dll –recurse:d:\fop   The ikvmc is located in the bin subdirectory where you unpacked the IKVM.NET. You must execute this command from this catalog, add this path to the global variable PATH or specify the full path to the bin subdirectory.   In no error occurred during this process, the fop.dll library should be created. Right now we can create a simple project to test if we can create a pdf file.   So let’s create a simple console project application and add reference to the fop.dll and the IKVM dll’s: IKVM.OpenJDK.Core and IKVM.OpenJDK.XML.API.   Full code to generate a pdf file from XSL-FO template:   static void Main(string[] args)         {             //initialize the Apache FOP             FopFactory fopFactory = FopFactory.newInstance();               //in this stream we will get the generated pdf file             OutputStream o = new DotNetOutputMemoryStream();             try             {                 Fop fop = fopFactory.newFop("application/pdf", o);                 TransformerFactory factory = TransformerFactory.newInstance();                 Transformer transformer = factory.newTransformer();                   //read the template from disc                 Source src = new StreamSource(new File("HelloWorld.fo"));                 Result res = new SAXResult(fop.getDefaultHandler());                 transformer.transform(src, res);             }             finally             {                 o.close();             }             using (System.IO.FileStream fs = System.IO.File.Create("HelloWorld.pdf"))             {                 //write from the .NET MemoryStream stream to disc the generated pdf file                 var data = ((DotNetOutputMemoryStream)o).Stream.GetBuffer();                 fs.Write(data, 0, data.Length);             }             Process.Start("HelloWorld.pdf");             System.Console.ReadLine();         }   Apache FOP be default using a Java’s Xalan to work with XML files. I didn’t find a way to replace this piece of code with equivalent from .NET standard library. If any error or warning will occure during generating the pdf file, on the console will ge shown, that’s why I inserted the last line in the sample above. The DotNetOutputMemoryStream this is my wrapper for the Java OutputStream. I have created it to have the possibility to exchange data between the .NET <-> Java objects. It’s implementation:   class DotNetOutputMemoryStream : OutputStream     {         private System.IO.MemoryStream ms = new System.IO.MemoryStream();         public System.IO.MemoryStream Stream         {             get             {                 return ms;             }         }         public override void write(int i)         {             ms.WriteByte((byte)i);         }         public override void write(byte[] b, int off, int len)         {             ms.Write(b, off, len);         }         public override void write(byte[] b)         {             ms.Write(b, 0, b.Length);         }         public override void close()         {             ms.Close();         }         public override void flush()         {             ms.Flush();         }     } The last thing we need, this is the HelloWorld.fo template.   <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format"          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">   <fo:layout-master-set>     <fo:simple-page-master master-name="simple"                   page-height="29.7cm"                   page-width="21cm"                   margin-top="1.8cm"                   margin-bottom="0.8cm"                   margin-left="1.6cm"                   margin-right="1.2cm">       <fo:region-body margin-top="3cm"/>       <fo:region-before extent="3cm"/>       <fo:region-after extent="1.5cm"/>     </fo:simple-page-master>   </fo:layout-master-set>   <fo:page-sequence master-reference="simple">     <fo:flow flow-name="xsl-region-body">       <fo:block font-size="18pt" color="black" text-align="center">         Hello, World!       </fo:block>     </fo:flow>   </fo:page-sequence> </fo:root>   I’m not going to explain how how this template is created, because this will be covered in the near future posts.   Generated pdf file should look that:

    Read the article

  • Browser Specific Extensions of HttpClient

    - by imran_ku07
            Introduction:                     REpresentational State Transfer (REST) causing/leaving a great impact on service/API development because it offers a way to access a service without requiring any specific library by embracing HTTP and its features. ASP.NET Web API makes it very easy to quickly build RESTful HTTP services. These HTTP services can be consumed by a variety of clients including browsers, devices, machines, etc. With .NET Framework 4.5, we can use HttpClient class to consume/send/receive RESTful HTTP services(for .NET Framework 4.0, HttpClient class is shipped as part of ASP.NET Web API). The HttpClient class provides a bunch of helper methods(for example, DeleteAsync, PostAsync, GetStringAsync, etc.) to consume a HTTP service very easily. ASP.NET Web API added some more extension methods(for example, PutAsJsonAsync, PutAsXmlAsync, etc) into HttpClient class to further simplify the usage. In addition, HttpClient is also an ideal choice for writing integration test for a RESTful HTTP service. Since a browser is a main client of any RESTful API, it is also important to test the HTTP service on a variety of browsers. RESTful service embraces HTTP headers and different browsers send different HTTP headers. So, I have created a package that will add overloads(with an additional Browser parameter) for almost all the helper methods of HttpClient class. In this article, I will show you how to use this package.           Description:                     Create/open your test project and install ImranB.SystemNetHttp.HttpClientExtensions NuGet package. Then, add this using statement on your class, using ImranB.SystemNetHttp;                     Then, you can start using any HttpClient helper method which include the additional Browser parameter. For example,  var client = new HttpClient(myserver); var task = client.GetAsync("http://domain/myapi", Browser.Chrome); task.Wait(); var response = task.Result; .                     Here is the definition  of Browser, public enum Browser { Firefox = 0, Chrome = 1, IE10 = 2, IE9 = 3, IE8 = 4, IE7 = 5, IE6 = 6, Safari = 7, Opera = 8, Maxthon = 9, }                     These extension methods will make it very easy to write browser specific integration test. It will also help HTTP service consumer to mimic the request sending behavior of a browser. This package source is available on github. So, you can grab the source and add some additional behavior on the top of these extensions.         Summary:                     Testing a REST API is an important aspect of service development and today, testing with a browser is crucial. In this article, I showed how to write integration test that will mimic the browser request sending behavior. I also showed an example. Hopefully you will enjoy this article too.

    Read the article

  • Oracle HRMS API – Update Employee Assignment

    - by PRajkumar
    To Update Supervisor, Manager Flag, Bargaining Unit, Labour Union Member Flag, Gre, Time Card, Work Schedule, Normal Hours, Frequency, Time Normal Finish, Time Normal Start, Default Code Combination, Set of Books Id API -- hr_assignment_api.update_emp_asg   To Update Grade, Location, Job, Payroll, Organization, Employee Category, People Group API -- hr_assignment_api.update_emp_asg_criteria   Example --   DECLARE    -- Local Variables    -- -----------------------    lc_dt_ud_mode           VARCHAR2(100)    := NULL;    ln_assignment_id       NUMBER                  := 33561;    ln_supervisor_id        NUMBER                  := 2;    ln_object_number       NUMBER                  := 1;    ln_people_group_id  NUMBER                  := 1;      -- Out Variables for Find Date Track Mode API    -- -----------------------------------------------------------------    lb_correction                           BOOLEAN;    lb_update                                 BOOLEAN;    lb_update_override              BOOLEAN;    lb_update_change_insert   BOOLEAN;       -- Out Variables for Update Employee Assignment API    -- ----------------------------------------------------------------------------    ln_soft_coding_keyflex_id       HR_SOFT_CODING_KEYFLEX.SOFT_CODING_KEYFLEX_ID%TYPE;    lc_concatenated_segments       VARCHAR2(2000);    ln_comment_id                             PER_ALL_ASSIGNMENTS_F.COMMENT_ID%TYPE;    lb_no_managers_warning        BOOLEAN;  -- Out Variables for Update Employee Assgment Criteria  -- -------------------------------------------------------------------------------  ln_special_ceiling_step_id                    PER_ALL_ASSIGNMENTS_F.SPECIAL_CEILING_STEP_ID%TYPE;  lc_group_name                                          VARCHAR2(30);  ld_effective_start_date                             PER_ALL_ASSIGNMENTS_F.EFFECTIVE_START_DATE%TYPE;  ld_effective_end_date                              PER_ALL_ASSIGNMENTS_F.EFFECTIVE_END_DATE%TYPE;  lb_org_now_no_manager_warning   BOOLEAN;  lb_other_manager_warning                  BOOLEAN;  lb_spp_delete_warning                          BOOLEAN;  lc_entries_changed_warning                VARCHAR2(30);  lb_tax_district_changed_warn             BOOLEAN;   BEGIN    -- Find Date Track Mode    -- --------------------------------    dt_api.find_dt_upd_modes    (    p_effective_date                  => TO_DATE('12-JUN-2011'),         p_base_table_name            => 'PER_ALL_ASSIGNMENTS_F',         p_base_key_column           => 'ASSIGNMENT_ID',         p_base_key_value               => ln_assignment_id,          -- Output data elements          -- --------------------------------          p_correction                          => lb_correction,          p_update                                => lb_update,          p_update_override              => lb_update_override,          p_update_change_insert   => lb_update_change_insert      );      IF ( lb_update_override = TRUE OR lb_update_change_insert = TRUE )    THEN        -- UPDATE_OVERRIDE        -- ---------------------------------        lc_dt_ud_mode := 'UPDATE_OVERRIDE';    END IF;     IF ( lb_correction = TRUE )   THEN       -- CORRECTION       -- ----------------------      lc_dt_ud_mode := 'CORRECTION';   END IF;     IF ( lb_update = TRUE )   THEN       -- UPDATE       -- --------------       lc_dt_ud_mode := 'UPDATE';    END IF;     -- Update Employee Assignment   -- ---------------------------------------------  hr_assignment_api.update_emp_asg  ( -- Input data elements   -- ------------------------------   p_effective_date                              => TO_DATE('12-JUN-2011'),   p_datetrack_update_mode         => lc_dt_ud_mode,   p_assignment_id                            => ln_assignment_id,   p_supervisor_id                              => NULL,   p_change_reason                           => NULL,   p_manager_flag                              => 'N',   p_bargaining_unit_code              => NULL,   p_labour_union_member_flag   => NULL,   p_segment1                                       => 204,   p_segment3                                       => 'N',   p_normal_hours                              => 10,   p_frequency                                       => 'W',   -- Output data elements   -- -------------------------------   p_object_version_number             => ln_object_number,   p_soft_coding_keyflex_id              => ln_soft_coding_keyflex_id,   p_concatenated_segments             => lc_concatenated_segments,   p_comment_id                                   => ln_comment_id,   p_effective_start_date                      => ld_effective_start_date,   p_effective_end_date                        => ld_effective_end_date,   p_no_managers_warning               => lb_no_managers_warning,   p_other_manager_warning            => lb_other_manager_warning  );    -- Find Date Track Mode for Second API   -- ------------------------------------------------------   dt_api.find_dt_upd_modes   (  p_effective_date                   => TO_DATE('12-JUN-2011'),      p_base_table_name            => 'PER_ALL_ASSIGNMENTS_F',      p_base_key_column           => 'ASSIGNMENT_ID',      p_base_key_value               => ln_assignment_id,      -- Output data elements      -- -------------------------------      p_correction                           => lb_correction,      p_update                                 => lb_update,      p_update_override               => lb_update_override,      p_update_change_insert    => lb_update_change_insert   );     IF ( lb_update_override = TRUE OR lb_update_change_insert = TRUE )   THEN     -- UPDATE_OVERRIDE     -- --------------------------------     lc_dt_ud_mode := 'UPDATE_OVERRIDE';   END IF;      IF ( lb_correction = TRUE )    THEN      -- CORRECTION      -- ----------------------      lc_dt_ud_mode := 'CORRECTION';   END IF;      IF ( lb_update = TRUE )    THEN      -- UPDATE      -- --------------      lc_dt_ud_mode := 'UPDATE';    END IF;    -- Update Employee Assgment Criteria  -- -----------------------------------------------------  hr_assignment_api.update_emp_asg_criteria  ( -- Input data elements   -- ------------------------------   p_effective_date                                   => TO_DATE('12-JUN-2011'),   p_datetrack_update_mode               => lc_dt_ud_mode,   p_assignment_id                                 => ln_assignment_id,   p_location_id                                        => 204,   p_grade_id                                             => 29,   p_job_id                                                  => 16,   p_payroll_id                                          => 52,   p_organization_id                               => 239,   p_employment_category                    => 'FR',   -- Output data elements   -- -------------------------------   p_people_group_id                              => ln_people_group_id,   p_object_version_number                   => ln_object_number,   p_special_ceiling_step_id                  => ln_special_ceiling_step_id,   p_group_name                                        => lc_group_name,   p_effective_start_date                           => ld_effective_start_date,   p_effective_end_date                             => ld_effective_end_date,   p_org_now_no_manager_warning  => lb_org_now_no_manager_warning,   p_other_manager_warning                 => lb_other_manager_warning,   p_spp_delete_warning                         => lb_spp_delete_warning,   p_entries_changed_warning              => lc_entries_changed_warning,   p_tax_district_changed_warning     => lb_tax_district_changed_warn  );    COMMIT; EXCEPTION          WHEN OTHERS THEN                       ROLLBACK;                       dbms_output.put_line(SQLERRM); END; / SHOW ERR;    

    Read the article

  • Run a pc on battery for 3 days?

    - by Zen 8000k
    I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this?

    Read the article

  • ASP.NET MVC, Web API, Razor, e Open Source (Código Aberto)

    - by Leniel Macaferi
    A Microsoft tornou o código fonte da ASP.NET MVC disponível sob uma licença open source (de código aberto) desde a primeira versão V1. Nós também integramos uma série de grandes tecnologias de código aberto no produto, e agora entregamos jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js e JSON.NET como parte integrante dos lançamentos da ASP.NET MVC. Estou muito animado para anunciar hoje que também iremos liberar o código fonte da ASP.NET Web API e ASP.NET Web Pages (também conhecido como Razor) sob uma licença open source (Apache 2.0), e que iremos aumentar a transparência do desenvolvimento de todos os três projetos hospedando seus repositórios de código no CodePlex (usando o novo suporte ao Git anunciado na semana passada - em Inglês). Isso permitirá um modelo de desenvolvimento mais aberto, onde toda a comunidade será capaz de participar e fornecer feedback nos checkins (envios de código), corrigir bugs, desenvolver novos recursos, e construir e testar os produtos diariamente usando a versão do código-fonte e testes mais atualizada possível. Nós também pela primeira vez permitiremos que os desenvolvedores de fora da Microsoft enviem correções e contribuições de código que a equipe de desenvolvimento da Microsoft irá rever para potencial inclusão nos produtos. Nós anunciamos uma abordagem de desenvolvimento semelhantemente aberta com o Windows Azure SDK em Dezembro passado, e achamos que essa abordagem é um ótimo caminho para estreitar as relações, pois permite um excelente ciclo de feedback com os desenvolvedores - e, finalmente, permite a entrega de produtos ainda melhores, como resultado. Muito importante - ASP.NET MVC, Web API e o Razor continuarão a ser totalmente produtos suportados pela Microsoft que são lançados tanto independentemente, bem como parte do Visual Studio (exatamente da mesma maneira como é feito hoje em dia). Eles também continuarão a ser desenvolvidos pelos mesmos desenvolvedores da Microsoft que os constroem hoje (na verdade, temos agora muito mais desenvolvedores da Microsoft trabalhando na equipe da ASP.NET). Nosso objetivo com o anúncio de hoje é aumentar ainda mais o ciclo de feedback/retorno sobre os produtos, para nos permitir oferecer produtos ainda melhores. Estamos realmente entusiasmados com as melhorias que isso trará. Saiba mais Agora você pode navegar, sincronizar e construir a árvore de código fonte da ASP.NET MVC, Web API, e Razor através do website http://aspnetwebstack.codeplex.com.  O repositório Git atual no site refere-se à árvore de desenvolvimento do marco RC (release candidate/candidata a lançamento) na qual equipe vem trabalhando nas últimas semanas, e esta mesma árvore contém ambos o código fonte e os testes, e pode ser construída e testada por qualquer pessoa. Devido aos binários produzidos serem bin-deployable (DLLs instaladas diretamente na pasta bin sem demais dependências), isto permite a você compilar seus próprios builds e experimentar as atualizações do produto, tão logo elas sejam adicionadas no repositório. Agora você também pode contribuir diretamente para o desenvolvimento dos produtos através da revisão e envio de feedback sobre os checkins de código, enviando bugs e ajudando-nos a verificar as correções tão logo elas sejam enviadas para o repositório, sugerindo e dando feedback sobre os novos recursos enquanto eles são implementados, bem como enviando suas próprias correções ou contribuições de código. Note que todas as submissões de código serão rigorosamente analisadas ??e testadas pelo Time da ASP.NET MVC, e apenas aquelas que atenderem a um padrão elevado de qualidade e adequação ao roadmap (roteiro) definido para as próximas versões serão incorporadas ao código fonte do produto. Sumário Todos nós da equipe estamos realmente entusiasmados com o anúncio de hoje - isto é algo no qual nós estivemos trabalhando por muitos anos. O estreitamento no relacionamento entre a comunidade e os desenvolvedores nos permitirá construir produtos ainda melhores levando a ASP.NET para o próximo nível em termos de inovação e foco no cliente. Obrigado! Scott P.S. Além do blog, eu uso o Twitter para disponibilizar posts rápidos e para compartilhar links. Meu apelido no Twitter é: @scottgu Texto traduzido do post original por Leniel Macaferi.

    Read the article

  • ASP.NET MVC, Web API, Razor and Open Source

    - by ScottGu
    Microsoft has made the source code of ASP.NET MVC available under an open source license since the first V1 release. We’ve also integrated a number of great open source technologies into the product, and now ship jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js and JSON.NET as part of it. I’m very excited to announce today that we will also release the source code for ASP.NET Web API and ASP.NET Web Pages (aka Razor) under an open source license (Apache 2.0), and that we will increase the development transparency of all three projects by hosting their code repositories on CodePlex (using the new Git support announced last week). Doing so will enable a more open development model where everyone in the community will be able to engage and provide feedback on code checkins, bug-fixes, new feature development, and build and test the products on a daily basis using the most up-to-date version of the source code and tests. We will also for the first time allow developers outside of Microsoft to submit patches and code contributions that the Microsoft development team will review for potential inclusion in the products. We announced a similar open development approach with the Windows Azure SDK last December, and have found it to be a great way to build an even tighter feedback loop with developers – and ultimately deliver even better products as a result. Very importantly - ASP.NET MVC, Web API and Razor will continue to be fully supported Microsoft products that ship both standalone as well as part of Visual Studio (the same as they do today). They will also continue to be staffed by the same Microsoft developers that build them today (in fact, we have more Microsoft developers working on the ASP.NET team now than ever before). Our goal with today’s announcement is to increase the feedback loop on the products even more, and allow us to deliver even better products.  We are really excited about the improvements this will bring. Learn More You can now browse, sync and build the source tree of ASP.NET MVC, Web API, and Razor on the http://aspnetwebstack.codeplex.com web-site.  The Git repository on the site is the live RC milestone development tree that the team has been working on the last several weeks, and the tree contains both the runtime sources + tests, and is buildable and testable by anyone.  Because the binaries produced are bin-deployable, this allows you to compile your own builds and try product updates out as soon as they are checked-in. You can also now contribute directly to the development of the products by reviewing and sending feedback on code checkins, submitting bugs and helping us verify fixes as they are checked in, suggesting and giving feedback on new features as they are implemented, as well as by submitting code fixes or code contributions of your own. Note that all code submissions will be rigorously reviewed and tested by the ASP.NET MVC Team, and only those that meet an extremely high bar for both quality and design/roadmap appropriateness will be merged into the source. Summary All of us on the team are really excited about today’s announcement – it has been something we’ve been working toward for many years.  The tighter feedback loop is going to enable us to build even better products, and take ASP.NET to the next level in terms of innovation and customer focus. Thanks, Scott P.S. In addition to blogging, I use Twitter to-do quick posts and share links. My Twitter handle is: @scottgu

    Read the article

  • High load average, low CPU and IO (Centos 5.7)

    - by Ben
    A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

    Read the article

  • PDU management interface has low availability - product flaw or isolated issue

    - by DeanB
    Our colocation provider has supplied us with APC AP7932 switched 0U PDUs as part of several cabinets they provide us. We have had a lot of trouble with the network management aspect of these PDUs, which I'll describe below. We are moving to cage space in the same datacenter, and plan to provide our own PDUs, so I'd like to determine which enterprise-grade PDUs have been reliable performers from a remote management perspective. Our colo-provided PDUs are configured to support management via an SSL web UI and via telnet. We updated the firmware on all of them to the current version as of NOV2011. They respond to pings reliably, and we have no reason to suspect a network layer issue. However, we experience frequent hangs, timeouts, disconnects, and general unavailability from the embedded management host in all of the PDUs. We occasionally have to restart the microcontroller on the PDU to recover from what appears to be an occasional hard fault. The outlets stay powered (thankfully), but the management aspect is so unreliable that it has become an ops liability - we can't be confident that we could get into the PDU to power cycle a host if we needed to. We have 3 PDUs that all exhibit identical behavior. There are many manufacturers of enterprise-grade 0U switched PDUs, all with comparable features. If I looked at the datasheet for our current PDUs, they would appear to be a good fit -- only with the benefit of suffering through using them do we know to avoid them. I'd like to avoid picking a PDU that looks fine on paper, but has similar reliability issues. What has been others' experience with switched PDUs? Is this level of flakiness normal?

    Read the article

  • PHP - Internal APIs/Libraries - What makes sense?

    - by Mark Locker
    I've been having a discussion lately with some colleagues about the best way to approach a new project, and thought it'd be interesting to get some external thoughts thrown into the mix. Basically, we're redeveloping a fairly large site (written in PHP) and have differing opinions on how the platform should be setup. Requirements: The platform will need to support multiple internal websites, as well as external (non-PHP) projects which at the moment consist of a mobile app and a toolbar. We have no plans/need in the foreseeable future to open up an API externally (for use in products other than our own). My opinion: We should have a library of well documented native model classes which can be shared between projects. These models will represent everything in our database and can take advantage of object orientated features such as inheritance, traits, magic methods, etc. etc. As well as employing ORM. We can then add an API layer on top of these models which can basically accept requests and route them to the appropriate methods, translating the response so that it can be used platform independently. This routing for each method can be setup as and when it's required. Their opinion: We should have a single HTTP API which is used by all projects (internal PHP ones or otherwise). My thoughts: To me, there are a number of issues with using the sole HTTP API approach: It will be very expensive performance wise. One page request will result in several additional http requests (which although local, are still ones that Apache will need to handle). You'll lose all of the best features PHP has for OO development. From simple inheritance, to employing the likes of ORM which can save you writing a lot of code. For internal projects, the actual process makes me cringe. To get a users name, for example, a request would go out of our box, over the LAN, back in, then run through a script which calls a method, JSON encodes the output and feeds that back. That would then need to be JSON decoded, and be presented as an array ready to use. Working with arrays, as appose to objects, makes me sad in a modern PHP framework. Their thoughts (and my responses): Having one method of doing thing keeps things simple. - You'd only do things differently if you were using a different language anyway. It will become robust. - Seeing as the API will run off the library of models, I think my option would be just as robust. What do you think? I'd be really interested to hear the thoughts of others on this, especially as opinions on both sides are not founded on any past experience.

    Read the article

  • Create Levels using blender

    - by notrodash
    I am creating a game and I have a custom level format for levels in my game. I wanted to know if it is possible to create levels for that kinda format in Blender. My format is XML based and just declares the positions of certain objects. Online I have seen many people use Blender to create levels in their own custom format that blender can understand. How do i get blender to understand my format and use blender to create levels for my game?

    Read the article

  • Building a Store Locator ASP.NET Application Using Google Maps API (Part 3)

    Over the past two weeks I've showed how to build a store locator application using ASP.NET and the free Google Maps API and Google's geocoding service. Part 1 looked at creating the database to record the store locations. This database contains a table named Stores with columns capturing each store's address and latitude and longitude coordinates. Part 1 also showed how to use Google's geocoding service to translate a user-entered address into latitude and longitude coordinates, which could then be used to retrieve and display those stores within (roughly) a 15 mile area. At the end of Part 1, the results page listed the nearby stores in a grid. In Part 2 we used the Google Maps API to add an interactive map to the search results page, with each nearby store displayed on the map as a marker. The map added in Part 2 certainly improves the search results page, but the way the nearby stores are displayed on the map leaves a bit to be desired. For starters, each nearby store is displayed on the map using the same marker icon, namely a red pushpin. This makes it difficult to match up the nearby stores listed in the grid with those displayed on the map. Hovering the mouse over a marker on the map displays the store number in a tooltip, but ideally a user could click a marker to see more detailed information about the store, such as its address, phone number, a photo of the storefront, and so forth. This third and final installment shows how to enhance the map created in Part 2. Specifically, we'll see how to customize the marker icons displayed in the map to make it easier to identify which marker corresponds to which nearby store location. We'll also look at adding rich popup windows to each marker, which includes detailed store information and can be updated further to include pictures and other HTML content. Read on to learn more! Read More >

    Read the article

  • Building a Store Locator ASP.NET Application Using Google Maps API (Part 3)

    Over the past two weeks I've showed how to build a store locator application using ASP.NET and the free Google Maps API and Google's geocoding service. Part 1 looked at creating the database to record the store locations. This database contains a table named Stores with columns capturing each store's address and latitude and longitude coordinates. Part 1 also showed how to use Google's geocoding service to translate a user-entered address into latitude and longitude coordinates, which could then be used to retrieve and display those stores within (roughly) a 15 mile area. At the end of Part 1, the results page listed the nearby stores in a grid. In Part 2 we used the Google Maps API to add an interactive map to the search results page, with each nearby store displayed on the map as a marker. The map added in Part 2 certainly improves the search results page, but the way the nearby stores are displayed on the map leaves a bit to be desired. For starters, each nearby store is displayed on the map using the same marker icon, namely a red pushpin. This makes it difficult to match up the nearby stores listed in the grid with those displayed on the map. Hovering the mouse over a marker on the map displays the store number in a tooltip, but ideally a user could click a marker to see more detailed information about the store, such as its address, phone number, a photo of the storefront, and so forth. This third and final installment shows how to enhance the map created in Part 2. Specifically, we'll see how to customize the marker icons displayed in the map to make it easier to identify which marker corresponds to which nearby store location. We'll also look at adding rich popup windows to each marker, which includes detailed store information and can be updated further to include pictures and other HTML content. Read on to learn more! Read More >Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Great Free Courses on Building HTML5 apps using ASP.NET Web API, Knockout.js and jQuery

    - by ScottGu
    Pluralsight has developed some great training courses on the new .NET 4.5 and VS 2012 release, including two fantastic courses from John Papa that cover how to build HTML5 web apps using ASP.NET Web API, Knockout and jQuery: Single Page Apps with HTML5, Web API, Knockout and jQuery Building HTML5 and JavaScript Apps with MVVM and Knockout Free 1-Month Subscription to the Courses Pluralsight is offering a special promotion that allows you to get a free 1-month subscription to watch the above courses at no cost.  There is no obligation to buy anything at the end of the offer and you don’t need to supply a credit card in order to take part in it. To get access to the course you simply follow @pluralsight and @john_papa on Twitter and then visit this page and enter your Twitter name using the form on it.  Pluralsight will then send you a private twitter message containing the access code that you can use to subscribe to the courses (and download the course exercise files).  Once you are subscribed to the course you have one month to watch the course (and you can watch it as many times as you want during the month). Pluralsight is running the promotion through Sept 18th – so sign-up now to get access.  Once you are signed up you then have a month to watch the course. Hope this helps, Scott P.S. And if you are new to Twitter you can also optionally follow me: @scottgu

    Read the article

  • How to enable services Discovery API in GoogleCL?

    - by Marcos
    There are bits and pieces of information all over the place but I'm trying to put it all together so that GoogleCL finally accesses more than the initial 7 services. Does anyone know of a step-by-step? Right now any attempt outside these result in the error message: google tasks list Did you specify the service correctly? Must be one of 'picasa', 'blogger', 'youtube', 'docs', 'contacts', 'calendar', 'finance' I installed GoogleCL from the Ubuntu repos, authenticated a few bundled services like contacts, docs etc. and those work great, giving me access to do certain operations like upload from the command line. I would really like to get it going to support tasks and all the other elegible Google services shown at https://code.google.com/apis/explorer/#_s=tasks Here are some guides/partial steps I've found: http://code.google.com/p/googlecl/wiki/DiscoveryManual (indicates needing to check it out updated GoogleCL from the subversion repository.) http://code.google.com/p/google-api-python-client/wiki/Installation easy_install --upgrade google-api-python-client http://code.google.com/p/googlecl/wiki/Install http://code.google.com/p/googlecl/source/checkout sudo -i cd /usr/local/src/ svn checkout http://googlecl.googlecode.com/svn/trunk/ googlecl-read-only cat googlecl-read-only/INSTALL.txt cd /usr/local/src/googlecl-read-only/ python setup.py install Result: $ google discovery list Traceback (most recent call last): File "/usr/bin/google", line 488, in run_interactive run_once(options, args) File "/usr/bin/google", line 540, in run_once options.config) File "/usr/bin/google", line 364, in import_service force_gdata_v1 = config.lazy_get(package.SECTION_HEADER, AttributeError: 'module' object has no attribute 'SECTION_HEADER'

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >