Search Results

Search found 1562 results on 63 pages for 'obtain'.

Page 61/63 | < Previous Page | 57 58 59 60 61 62 63  | Next Page >

  • Guide to reduce TFS database growth using the Test Attachment Cleaner

    - by terje
    Recently there has been several reports on TFS databases growing too fast and growing too big.  Notable this has been observed when one has started to use more features of the Testing system.  Also, the TFS 2010 handles test results differently from TFS 2008, and this leads to more data stored in the TFS databases. As a consequence of this there has been released some tools to remove unneeded data in the database, and also some fixes to correct for bugs which has been found and corrected during this process.  Further some preventive practices and maintenance rules should be adopted. A lot of people have blogged about this, among these are: Anu’s very important blog post here describes both the problem and solutions to handle it.  She describes both the Test Attachment Cleaner tool, and also some QFE/CU releases to fix some underlying bugs which prevented the tool from being fully effective. Brian Harry’s blog post here describes the problem too This forum thread describes the problem with some solution hints. Ravi Shanker’s blog post here describes best practices on solving this (TBP) Grant Holidays blogpost here describes strategies to use the Test Attachment Cleaner both to detect space problems and how to rectify them.   The problem can be divided into the following areas: Publishing of test results from builds Publishing of manual test results and their attachments in particular Publishing of deployment binaries for use during a test run Bugs in SQL server preventing total cleanup of data (All the published data above is published into the TFS database as attachments.) The test results will include all data being collected during the run.  Some of this data can grow rather large, like IntelliTrace logs and video recordings.   Also the pushing of binaries which happen for automated test runs, including tests run during a build using code coverage which will include all the files in the deployment folder, contributes a lot to the size of the attached data.   In order to handle this systematically, I have set up a 3-stage process: Find out if you have a database space issue Set up your TFS server to minimize potential database issues If you have the “problem”, clean up the database and otherwise keep it clean   Analyze the data Are your database( s) growing ?  Are unused test results growing out of proportion ? To find out about this you need to query your TFS database for some of the information, and use the Test Attachment Cleaner (TAC) to obtain some  more detailed information. If you don’t have too many databases you can use the SQL Server reports from within the Management Studio to analyze the database and table sizes. Or, you can use a set of queries . I find queries often faster to use because I can tweak them the way I want them.  But be aware that these queries are non-documented and non-supported and may change when the product team wants to change them. If you have multiple Project Collections, find out which might have problems: (Disclaimer: The queries below work on TFS 2010. They will not work on Dev-11, since the table structure have been changed.  I will try to update them for Dev-11 when it is released.) Open a SQL Management Studio session onto the SQL Server where you have your TFS Databases. Use the query below to find the Project Collection databases and their sizes, in descending size order.  use master select DB_NAME(database_id) AS DBName, (size/128) SizeInMB FROM sys.master_files where type=0 and substring(db_name(database_id),1,4)='Tfs_' and DB_NAME(database_id)<>'Tfs_Configuration' order by size desc Doing this on one of our SQL servers gives the following results: It is pretty easy to see on which collection to start the work   Find out which tables are possibly too large Keep a special watch out for the Tfs_Attachment table. Use the script at the bottom of Grant’s blog to find the table sizes in descending size order. In our case we got this result: From Grant’s blog we learnt that the tbl_Content is in the Version Control category, so the major only big issue we have here is the tbl_AttachmentContent.   Find out which team projects have possibly too large attachments In order to use the TAC to find and eventually delete attachment data we need to find out which team projects have these attachments. The team project is a required parameter to the TAC. Use the following query to find this, replace the collection database name with whatever applies in your case:   use Tfs_DefaultCollection select p.projectname, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by p.projectname order by sum(a.compressedlength) desc In our case we got this result (had to remove some names), out of more than 100 team projects accumulated over quite some years: As can be seen here it is pretty obvious the “Byggtjeneste – Projects” are the main team project to take care of, with the ones on lines 2-4 as the next ones.  Check which attachment types takes up the most space It can be nice to know which attachment types takes up the space, so run the following query: use Tfs_DefaultCollection select a.attachmenttype, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by a.attachmenttype order by sum(a.compressedlength) desc We then got this result: From this it is pretty obvious that the problem here is the binary files, as also mentioned in Anu’s blog. Check which file types, by their extension, takes up the most space Run the following query use Tfs_DefaultCollection select SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999)as Extension, sum(compressedlength)/1024 as SizeInKB from tbl_Attachment group by SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999) order by sum(compressedlength) desc This gives a result like this:   Now you should have collected enough information to tell you what to do – if you got to do something, and some of the information you need in order to set up your TAC settings file, both for a cleanup and for scheduled maintenance later.    Get your TFS server and environment properly set up Even if you have got the problem or if have yet not got the problem, you should ensure the TFS server is set up so that the risk of getting into this problem is minimized.  To ensure this you should install the following set of updates and components. The assumption is that your TFS Server is at SP1 level. Install the QFE for KB2608743 – which also contains detailed instructions on its use, download from here. The QFE changes the default settings to not upload deployed binaries, which are used in automated test runs. Binaries will still be uploaded if: Code coverage is enabled in the test settings. You change the UploadDeploymentItem to true in the testsettings file. Be aware that this might be reset back to false by another user which haven't installed this QFE. The hotfix should be installed to The build servers (the build agents) The machine hosting the Test Controller Local development computers (Visual Studio) Local test computers (MTM) It is not required to install it to the TFS Server, test agents or the build controller – it has no effect on these programs. If you use the SQL Server 2008 R2 you should also install the CU 10 (or later).  This CU fixes a potential problem of hanging “ghost” files.  This seems to happen only in certain trigger situations, but to ensure it doesn’t bite you, it is better to make sure this CU is installed. There is no such CU for SQL Server 2008 pre-R2 Work around:  If you suspect hanging ghost files, they can be – with some mental effort, deduced from the ghost counters using the following SQL query: use master SELECT DB_NAME(database_id) as 'database',OBJECT_NAME(object_id) as 'objectname', index_type_desc,ghost_record_count,version_ghost_record_count,record_count,avg_record_size_in_bytes FROM sys.dm_db_index_physical_stats (DB_ID(N'<DatabaseName>'), OBJECT_ID(N'<TableName>'), NULL, NULL , 'DETAILED') The problem is a stalled ghost cleanup process.  Restarting the SQL server after having stopped all components that depends on it, like the TFS Server and SPS services – that is all applications that connect to the SQL server. Then restart the SQL server, and finally start up all dependent processes again.  (I would guess a complete server reboot would do the trick too.) After this the ghost cleanup process will run properly again. The fix will come in the next CU cycle for SQL Server R2 SP1.  The R2 pre-SP1 and R2 SP1 have separate maintenance cycles, and are maintained individually. Each have its own set of CU’s. When it comes I will add the link here to that CU. The "hanging ghost file” issue came up after one have run the TAC, and deleted enourmes amount of data.  The SQL Server can get into this hanging state (without the QFE) in certain cases due to this. And of course, install and set up the Test Attachment Cleaner command line power tool.  This should be done following some guidelines from Ravi Shanker: “When you run TAC, ensure that you are deleting small chunks of data at regular intervals (say run TAC every night at 3AM to delete data that is between age 730 to 731 days) – this will ensure that small amounts of data are being deleted and SQL ghosted record cleanup can catch up with the number of deletes performed. “ This rule minimizes the risk of the ghosted hang problem to occur, and further makes it easier for the SQL server ghosting process to work smoothly. “Run DBCC SHRINKDB post the ghosted records are cleaned up to physically reclaim the space on the file system” This is the last step in a 3 step process of removing SQL server data. First they are logically deleted. Then they are cleaned out by the ghosting process, and finally removed using the shrinkdb command. Cleaning out the attachments The TAC is run from the command line using a set of parameters and controlled by a settingsfile.  The parameters point out a server uri including the team project collection and also point at a specific team project. So in order to run this for multiple team projects regularly one has to set up a script to run the TAC multiple times, once for each team project.  When you install the TAC there is a very useful readme file in the same directory. When the deployment binaries are published to the TFS server, ALL items are published up from the deployment folder. That often means much more files than you would assume are necessary. This is a brute force technique. It works, but you need to take care when cleaning up. Grant has shown how their settings file looks in his blog post, removing all attachments older than 180 days , as long as there are no active workitems connected to them. This setting can be useful to clean out all items, both in a clean-up once operation, and in a general There are two scenarios we need to consider: Cleaning up an existing overgrown database Maintaining a server to avoid an overgrown database using scheduled TAC   1. Cleaning up a database which has grown too big due to these attachments. This job is a “Once” job.  We do this once and then move on to make sure it won’t happen again, by taking the actions in 2) below.  In this scenario you should only consider the large files. Your goal should be to simply reduce the size, and don’t bother about  the smaller stuff. That can be left a scheduled TAC cleanup ( 2 below). Here you can use a very general settings file, and just remove the large attachments, or you can choose to remove any old items.  Grant’s settings file is an example of the last one.  A settings file to remove only large attachments could look like this: <!-- Scenario : Remove large files --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> </Attachment> </DeletionCriteria> Or like this: If you want only to remove dll’s and pdb’s about that size, add an Extensions-section.  Without that section, all extensions will be deleted. <!-- Scenario : Remove large files of type dll's and pdb's --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="dll" /> <Include value="pdb" /> </Extensions> </Attachment> </DeletionCriteria> Before you start up your scheduled maintenance, you should clear out all older items. 2. Scheduled maintenance using the TAC If you run a schedule every night, and remove old items, and also remove them in small batches.  It is important to run this often, like every night, in order to keep the number of deleted items low. That way the SQL ghost process works better. One approach could be to delete all items older than some number of days, let’s say 180 days. This could be combined with restricting it to keep attachments with active or resolved bugs.  Doing this every night ensures that only small amounts of data is deleted. <!-- Scenario : Remove old items except if they have active or resolved bugs --> <DeletionCriteria> <TestRun> <AgeInDays OlderThan="180" /> </TestRun> <Attachment /> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved"/> </LinkedBugs> </DeletionCriteria> In my experience there are projects which are left with active or resolved workitems, akthough no further work is done.  It can be wise to have a cleanup process with no restrictions on linked bugs at all. Note that you then have to remove the whole LinkedBugs section. A approach which could work better here is to do a two step approach, use the schedule above to with no LinkedBugs as a sweeper cleaning task taking away all data older than you could care about.  Then have another scheduled TAC task to take out more specifically attachments that you are not likely to use. This task could be much more specific, and based on your analysis clean out what you know is troublesome data. <!-- Scenario : Remove specific files early --> <DeletionCriteria> <TestRun > <AgeInDays OlderThan="30" /> </TestRun> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="iTrace"/> <Include value="dll"/> <Include value="pdb"/> <Include value="wmv"/> </Extensions> </Attachment> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved" /> </LinkedBugs> </DeletionCriteria> The readme document for the TAC says that it recognizes “internal” extensions, but it does recognize any extension. To run the tool do the following command: tcmpt attachmentcleanup /collection:your_tfs_collection_url /teamproject:your_team_project /settingsfile:path_to_settingsfile /outputfile:%temp%/teamproject.tcmpt.log /mode:delete   Shrinking the database You could run a shrink database command after the TAC has run in cases where there are a lot of data being deleted.  In this case you SHOULD do it, to free up all that space.  But, after the shrink operation you should do a rebuild indexes, since the shrink operation will leave the database in a very fragmented state, which will reduce performance. Note that you need to rebuild indexes, reorganizing is not enough. For smaller amounts of data you should NOT shrink the database, since the data will be reused by the SQL server when it need to add more records.  In fact, it is regarded as a bad practice to shrink the database regularly.  So on a daily maintenance schedule you should NOT shrink the database. To shrink the database you do a DBCC SHRINKDATABASE command, and then follow up with a DBCC INDEXDEFRAG afterwards.  I find the easiest way to do this is to create a SQL Maintenance plan including the Shrink Database Task and the Rebuild Index Task and just execute it when you need to do this.

    Read the article

  • How to avoid the Portlet Skin mismatch

    - by Martin Deh
    here are probably many on going debates whether to use portlets or taskflows in a WebCenter custom portal application.  Usually the main battle on which side to take in these debates are centered around which technology enables better performance.  The good news is that both of my colleagues, Maiko Rocha and George Maggessy have posted their respective views on this topic so I will not have to further the discussion.  However, if you do plan to use portlets in a WebCenter custom portal application, this post will help you not have the "portlet skin mismatch" issue.   An example of the presence of the mismatch can be view from the applications log: The skin customsharedskin.desktop specified on the requestMap will be used even though the consumer's skin's styleSheetDocumentId on the requestMap does not match the local skin's styleSheetDocument's id. This will impact performance since the consumer and producer stylesheets cannot be shared. The producer styleclasses will not be compressed to avoid conflicts. A reason the ids do not match may be the jars are not identical on the producer and the consumer. For example, one might have trinidad-skins.xml's skin-additions in a jar file on the class path that the other does not have. Notice that due to the mismatch the portlet's CSS will not be able to be compressed, which will most like impact performance in the portlet's consuming portal. The first part of the blog will define the portlet mismatch and cover some debugging tips that can help you solve the portlet mismatch issue.  Following that I will give a complete example of the creating, using and sharing a shared skin in both a portlet producer and the consumer application. Portlet Mismatch Defined  In general, when you consume/render an ADF page (or task flow) using the ADF Portlet bridge, the portlet (producer) would try to use the skin of the consumer page - this is called skin-sharing. When the producer cannot match the consumer skin, the portlet would generate its own stylesheet and reference it from its markup - this is called mismatched-skin. This can happen because: The consumer and producer use different versions of ADF Faces, or The consumer has additional skin-additions that the producer doesn't have or vice-versa, or The producer does not have the consumer skin For case (1) & (2) above, the producer still uses the consumer skin ID to render its markup. For case (3), the producer would default to using portlet skin. If there is a skin mis-match then there may be a performance hit because: The browser needs to fetch this extra stylesheet (though it should be cached unless expires caching is turned off) The generated portlet markup uses uncompressed styles resulting in a larger markup It is often not obvious when a skin mismatch occurs, unless you look for either of these indicators: The log messages in the producer log, for example: The skin blafplus-rich.desktop specified on the requestMap will not be used because the styleSheetDocument id on the requestMap does not match the local skin's styleSheetDocument's id. It could mean the jars are not identical. For example, one might have trinidad-skins.xml's skin-additions in a jar file on the class path that the other does not have. View the portlet markup inside the iframe, there should be a <link> tag to the portlet stylesheet resource like this (note the CSS is proxied through consumer's resourceproxy): <link rel=\"stylesheet\" charset=\"UTF-8\" type=\"text/css\" href=\"http:.../resourceproxy/portletId...252525252Fadf%252525252Fstyles%252525252Fcache%252525252Fblafplus-rich-portlet-d1062g-en-ltr-gecko.css... Using HTTP monitoring tool (eg, firebug, httpwatch), you can see a request is made to the portlet stylesheet resource (see URL above) There are a number of reasons for mismatched-skin. For skin to match the producer and consumer must match the following configurations: The ADF Faces version (different versions may have different style selectors) Style Compression, this is defined in the web.xml (default value is false, i.e. compression is ON) Tonal styles or themes, also defined in the web.xml via context-params The same skin additions (jars with skin) are available for both producer and consumer.  Skin additions are defined in the trinidad-skins.xml, using the <skin-addition> tags. These are then aggregated from all the jar files in the classpath. If there's any jar that exists on the producer but not the consumer, or vice veras, you get a mismatch. Debugging Tips  Ensure the style compression and tonal styles/themes match on the consumer and producer, by looking at the web.xml documents for the consumer & producer applications It is bit more involved to determine if the jars match.  However, you can enable the Trinidad logging to show which skin-addition it is processing.  To enable this feature, update the logging.xml log level of both the producer and consumer WLS to FINEST.  For example, in the case of the WebLogic server used by JDeveloper: $JDEV_USER_DIR/system<version number>/DefaultDomain/config/fmwconfig/servers/DefaultServer/logging.xml Add a new entry: <logger name="org.apache.myfaces.trinidadinternal.skin.SkinUtils" level="FINEST"/> Restart WebLogic.  Run the consumer page, you should see the following logging in both the consumer and producer log files. Any entries that don't match is the cause of the mismatch.  The following is an example of what the log will produce with this setting: [SRC_CLASS: org.apache.myfaces.trinidadinternal.skin.SkinUtils] [APP: WebCenter] [SRC_METHOD: _getMetaInfSkinsNodeList] Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/announcement-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/calendar-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/custComps-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/forum-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/page-service-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/peopleconnections-kudos-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/peopleconnections-wall-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/portlet-client-adf-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/rtc-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/serviceframework-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/smarttag-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/spaces-service-skins.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.composer/3yo7j/WEB-INF/lib/custComps-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/adf-richclient-impl-11.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/dvt-faces.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/dvt-trinidad.jar!/META-INF/trinidad-skins.xml   The Complete Example The first step is to create the shared library.  The WebCenter documentation covering this is located here in section 15.7.  In addition, our ADF guru Frank Nimphius also covers this in hes blog.  Here are my steps (in JDeveloper) to create the skin that will be used as the shared library for both the portlet producer and consumer. Create a new Generic Application Give application name (i.e. MySharedSkin) Give a project name (i.e. MySkinProject) Leave Project Technologies blank (none selected), and click Finish Create the trinidad-skins.xml Right-click on the MySkinProject node in the Application Navigator and select "New" In the New Galley, click on "General", select "File" from the Items, and click OK In the Create File dialog, name the file trinidad-skins.xml, and (IMPORTANT) give the directory path to MySkinProject\src\META-INF In the trinidad-skins.xml, complete the skin entry.  for example: <?xml version="1.0" encoding="windows-1252" ?> <skins xmlns="http://myfaces.apache.org/trinidad/skin">   <skin>     <id>mysharedskin.desktop</id>     <family>mysharedskin</family>     <extends>fusionFx-v1.desktop</extends>     <style-sheet-name>css/mysharedskin.css</style-sheet-name>   </skin> </skins> Create CSS file In the Application Navigator, right click on the META-INF folder (where the trinidad-skins.xml is located), and select "New" In the New Gallery, select Web-Tier-> HTML, CSS File from the the Items and click OK In the Create Cascading Style Sheet dialog, give the name (i.e. mysharedskin.css) Ensure that the Directory path is the under the META-INF (i.e. MySkinProject\src\META-INF\css) Once the new CSS opens in the editor, add in a style selector.  For example, this selector will style the background of a particular panelGroupLayout: af|panelGroupLayout.customPGL{     background-color:Fuchsia; } Create the MANIFEST.MF (used for deployment JAR) In the Application Navigator, right click on the META-INF folder (where the trinidad-skins.xml is located), and select "New" In the New Galley, click on "General", select "File" from the Items, and click OK In the Create File dialog, name the file MANIFEST.MF, and (IMPORTANT) ensure that the directory path is to MySkinProject\src\META-INF Complete the MANIFEST.MF, where the extension name is the shared library name Manifest-Version: 1.1 Created-By: Martin Deh Implementation-Title: mysharedskin Extension-Name: mysharedskin.lib.def Specification-Version: 1.0.1 Implementation-Version: 1.0.1 Implementation-Vendor: MartinDeh Create new Deployment Profile Right click on the MySkinProject node, and select New From the New Gallery, select General->Deployment Profiles, Shared Library JAR File from Items, and click OK In the Create Deployment Profile dialog, give name (i.e.mysharedskinlib) and click OK In the Edit JAR Deployment dialog, un-check Include Manifest File option  Select Project Output->Contributors, and check Project Source Path Select Project Output->Filters, ensure that all items under the META-INF folder are selected Click OK to exit the Project Properties dialog Deploy the shared lib to WebLogic (start server before steps) Right click on MySkin Project and select Deploy For this example, I will deploy to JDeverloper WLS In the Deploy dialog, select Deploy to Weblogic Application Server and click Next Choose IntegratedWebLogicServer and click Next Select Deploy to selected instances in the domain radio, select Default Server (note: server must be already started), and ensure Deploy as a shared Library radio is selected Click Finish Open the WebLogic console to see the deployed shared library The following are the steps to create a simple test Portlet Create a new WebCenter Portal - Portlet Producer Application In the Create Portlet Producer dialog, select default settings and click Finish Right click on the Portlets node and select New IIn the New Gallery, select Web-Tier->Portlets, Standards-based Java Portlet (JSR 286) and click OK In the General Portlet information dialog, give portlet name (i.e. MyPortlet) and click Next 2 times, stopping at Step 3 In the Content Types, select the "view" node, in the Implementation Method, select the Generate ADF-Faces JSPX radio and click Finish Once the portlet code is generated, open the view.jspx in the source editor Based on the simple CSS entry, which sets the background color of a panelGroupLayout, replace the <af:form/> tag with the example code <af:form>         <af:panelGroupLayout id="pgl1" styleClass="customPGL">           <af:outputText value="background from shared lib skin" id="ot1"/>         </af:panelGroupLayout>  </af:form> Since this portlet is to use the shared library skin, in the generated trinidad-config.xml, remove both the skin-family tag and the skin-version tag In the Application Resources view, under Descriptors->META-INF, double-click to open the weblogic-application.xml Add a library reference to the shared skin library (note: the library-name must match the extension-name declared in the MANIFEST.MF):  <library-ref>     <library-name>mysharedskin.lib.def</library-name>  </library-ref> Notice that a reference to oracle.webcenter.skin exists.  This is important if this portlet is going to be consumed by a WebCenter Portal application.  If this tag is not present, the portlet skin mismatch will happen.  Configure the portlet for deployment Create Portlet deployment WAR Right click on the Portlets node and select New In the New Gallery, select Deployment Profiles, WAR file from Items and click OK In the Create Deployment Profile dialog, give name (i.e. myportletwar), click OK Keep all of the defaults, however, remember the Context Root entry (i.e. MyPortlet4SharedLib-Portlets-context-root, this will be needed to obtain the producer WSDL URL) Click OK, then OK again to exit from the Properties dialog Since the weblogic-application.xml has to be included in the deployment, the portlet must be deployed as a WAR, within an EAR In the Application dropdown, select Deploy->New Deployment Profile... By default EAR File has been selected, click OK Give Deployment Profile (EAR) a name (i.e. MyPortletProducer) and click OK In the Properties dialog, select Application Assembly and ensure that the myportletwar is checked Keep all of the other defaults and click OK For this demo, un-check the Auto Generate ..., and all of the Security Deployment Options, click OK Save All In the Application dropdown, select Deploy->MyPortletProducer In the Deployment Action, select Deploy to Application Server, click Next Choose IntegratedWebLogicServer and click Next Select Deploy to selected instances in the domain radio, select Default Server (note: server must be already started), and ensure Deploy as a standalone Application radio is selected The select deployment type (identifying the deployment as a JSR 286 portlet) dialog appears.  Keep default radio "Yes" selection and click OK Open the WebLogic console to see the deployed Portlet The last step is to create the test portlet consuming application.  This will be done using the OOTB WebCenter Portal - Framework Application.  Create the Portlet Producer Connection In the JDeveloper Deployment log, copy the URL of the portlet deployment (i.e. http://localhost:7101/MyPortlet4SharedLib-Portlets-context-root Open a browser and paste in the URL.  The Portlet information page should appear.  Click on the WSRP v2 WSDL link Copy the URL from the browser (i.e. http://localhost:7101/MyPortlet4SharedLib-Portlets-context-root/portlets/wsrp2?WSDL) In the Application Resources view, right click on the Connections folder and select New Connection->WSRP Connection Give the producer a name or accept the default, click Next Enter (paste in) the WSDL URL, click Next If connection to Portlet is succesful, Step 3 (Specify Additional ...) should appear.  Accept defaults and click Finish Add the portlet to a test page Open the home.jspx.  Note in the visual editor, the orange dashed border, which identifies the panelCustomizable tag. From the Application Resources. select the MyPortlet portlet node, and drag and drop the node into the panelCustomizable section.  A Confirm Portlet Type dialog appears, keep default ADF Rich Portlet and click OK Configure the portlet to use the shared skin library Open the weblogic-application.xml and add the library-ref entry (mysharedskin.lib.def) for the shared skin library.  See create portlet example above for the steps Since by default, the custom portal using a managed bean to (dynamically) determine the skin family, the default trinidad-config.xml will need to be altered Open the trinidad-config.xml in the editor and replace the EL (preferenceBean) for the skin-family tag, with mysharedskin (this is the skin-family named defined in the trinidad-skins.xml) Remove the skin-version tag Right click on the index.html to test the application   Notice that the JDeveloper log view does not have any reporting of a skin mismatch.  In addition, since I have configured the extra logging outlined in debugging section above, I can see the processed skin jar in both the producer and consumer logs: <SkinUtils> <_getMetaInfSkinsNodeList> Processing skin URL:zip:/JDeveloper/system11.1.1.6.38.61.92/DefaultDomain/servers/DefaultServer/upload/mysharedskin.lib.def/[email protected]/app/mysharedskinlib.jar!/META-INF/trinidad-skins.xml 

    Read the article

  • Ops Center 12c - Provisioning Solaris Using a Card-Based NIC

    - by scottdickson
    It's been a long time since last I added something here, but having some conversations this last week, I got inspired to update things. I've been spending a lot of time with Ops Center for managing and installing systems these days.  So, I suspect a number of my upcoming posts will be in that area. Today, I want to look at how to provision Solaris using Ops Center when your network is not connected to one of the built-in NICs.  We'll talk about how this can work for both Solaris 10 and Solaris 11, since they are pretty similar.  In both cases, WANboot is a key piece of the story. Here's what I want to do:  I have a Sun Fire T2000 server with a Quad-GbE nxge card installed.  The only network is connected to port 2 on that card rather than the built-in network interfaces.  I want to install Solaris on it across the network, either Solaris 10 or Solaris 11.  I have met with a lot of customers lately who have a similar architecture.  Usually, they have T4-4 servers with the network connected via 10GbE connections. Add to this mix the fact that I use Ops Center to manage the systems in my lab, so I really would like to add this to Ops Center.  If possible, I would like this to be completely hands free.  I can't quite do that yet. Close, but not quite. WANBoot or Old-Style NetBoot? When a system is installed from the network, it needs some help getting the process rolling.  It has to figure out what its network configuration (IP address, gateway, etc.) ought to be.  It needs to figure out what server is going to help it boot and install, and it needs the instructions for the installation.  There are two different ways to bootstrap an installation of Solaris on SPARC across the network.   The old way uses a broadcast of RARP or more recently DHCP to obtain the IP configuration and the rest of the information needed.  The second is to explicitly configure this information in the OBP and use WANBoot for installation WANBoot has a number of benefits over broadcast-based installation: it is not restricted to a single subnet; it does not require special DHCP configuration or DHCP helpers; it uses standard HTTP and HTTPS protocols which traverse firewalls much more easily than NFS-based package installation.  But, WANBoot is not available on really old hardware and WANBoot requires the use o Flash Archives in Solaris 10.  Still, for many people, this is a great approach. As it turns out, WANBoot is necessary if you plan to install using a NIC on a card rather than a built-in NIC. Identifying Which Network Interface to Use One of the trickiest aspects to this process, and the one that actually requires manual intervention to set up, is identifying how the OBP and Solaris refer to the NIC that we want to use to boot.  The OBP already has device aliases configured for the built-in NICs called net, net0, net1, net2, net3.  The device alias net typically points to net0 so that when you issue the command  "boot net -v install", it uses net0 for the boot.  Our task is to figure out the network instance for the NIC we want to use.  We will need to get to the OBP console of the system we want to install in order to figure out what the network should be called.  I will presume you know how to get to the ok prompt.  Once there, we have to see what networks the OBP sees and identify which one is associated with our NIC using the OBP command show-nets. SunOS Release 5.11 Version 11.0 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. {4} ok banner Sun Fire T200, No Keyboard Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548. Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c. {4} ok show-nets a) /pci@7c0/pci@0/pci@2/network@0,1 b) /pci@7c0/pci@0/pci@2/network@0 c) /pci@780/pci@0/pci@8/network@0,3 d) /pci@780/pci@0/pci@8/network@0,2 e) /pci@780/pci@0/pci@8/network@0,1 f) /pci@780/pci@0/pci@8/network@0 g) /pci@780/pci@0/pci@1/network@0,1 h) /pci@780/pci@0/pci@1/network@0 q) NO SELECTION Enter Selection, q to quit: d /pci@780/pci@0/pci@8/network@0,2 has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias mydev ^Y for creating devalias mydev for /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias ... net3 /pci@7c0/pci@0/pci@2/network@0,1 net2 /pci@7c0/pci@0/pci@2/network@0 net1 /pci@780/pci@0/pci@1/network@0,1 net0 /pci@780/pci@0/pci@1/network@0 net /pci@780/pci@0/pci@1/network@0 ... name aliases By looking at the devalias and the show-nets output, we can see that our Quad-GbE card must be the device nodes starting with  /pci@780/pci@0/pci@8/network@0.  The cable for our network is plugged into the 3rd slot, so the device address for our network must be /pci@780/pci@0/pci@8/network@0,2. With that, we can create a device alias for our network interface.  Naming the device alias may take a little bit of trial and error, especially in Solaris 11 where the device alias seems to matter more with the new virtualized network stack. So far in my testing, since this is the "next" network interface to be used, I have found success in naming it net4, even though it's a NIC in the middle of a card that might, by rights, be called net6 (assuming the 0th interface on the card is the next interface identified by Solaris and this is the 3rd interface on the card).  So, we will call it net4.  We need to assign a device alias to it: {4} ok nvalias net4 /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias net4 /pci@780/pci@0/pci@8/network@0,2 ... We also may need to have the MAC for this particular interface, so let's get it, too.  To do this, we go to the device and interrogate its properties. {4} ok cd /pci@780/pci@0/pci@8/network@0,2 {4} ok .properties assigned-addresses 82060210 00000000 03000000 00000000 01000000 82060218 00000000 00320000 00000000 00008000 82060220 00000000 00328000 00000000 00008000 82060230 00000000 00600000 00000000 00100000 local-mac-address 00 21 28 20 42 92 phy-type mif ... From this, we can see that the MAC for this interface is  00:21:28:20:42:92.  We will need this later. This is all we need to do at the OBP.  Now, we can configure Ops Center to use this interface. Network Boot in Solaris 10 Solaris 10 turns out to be a little simpler than Solaris 11 for this sort of a network boot.  Since WANBoot in Solaris 10 fetches a specified In order to install the system using Ops Center, it is necessary to create a OS Provisioning profile and its corresponding plan.  I am going to presume that you already know how to do this within Ops Center 12c and I will just cover the differences between a regular profile and a profile that can use an alternate interface. Create a OS Provisioning profile for Solaris 10 as usual.  However, when you specify the network resources for the primary network, click on the name of the NIC, probably GB_0, and rename it to GB_N/netN, where N is the instance number you used previously in creating the device alias.  This is where the trial and error may come into play.  You may need to try a few instance numbers before you, the OBP, and Solaris all agree on the instance number.  Mark this as the boot network. For Solaris 10, you ought to be able to then apply the OS Provisioning profile to the server and it should install using that interface.  And if you put your cards in the same slots and plug the networks into the same NICs, this profile is reusable across multiple servers. Why This Works If you watch the console as Solaris boots during the OSP process, Ops Center is going to look for the device alias netN.  Since WANBoot requires a device alias called just net, Ops Center uses the value of your netN device alias and assigns that device to the net alias.  That means that boot net will automatically use this device.  Very cool!  Here's a trace from the console as Ops Center provisions a server: Sun Sun Fire T200, No KeyboardCopyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548.Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c.auto-boot? =            false{0} ok  {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2 See what happened?  Ops Center looked for the network device alias called net4 that we specified in the profile, took the value from it, and made it the net device alias for the boot.  Pretty cool! WANBoot and Solaris 11 Solaris 11 requires an additional step since the Automated Installer in Solaris 11 uses the MAC address of the network to figure out which manifest to use for system installation.  In order to make sure this is available, we have to take an extra step to associate the MAC of the NIC on the card with the host.  So, in addition to creating the device alias like we did above, we also have to declare to Ops Center that the host has this new MAC. Declaring the NIC Start out by discovering the hardware as usual.  Once you have discovered it, take a look under the Connectivity tab to see what networks it has discovered.  In the case of this system, it shows the 4 built-in networks, but not the networks on the additional cards.  These are not directly visible to the system controller.  In order to add the additional network interface to the hardware asset, it is necessary to Declare it.  We will declare that we have a server with this additional NIC, but we will also  specify the existing GB_0 network so that Ops Center can associate the right resources together.  The GB_0 acts as sort of a key to tie our new declaration to the old system already discovered.  Go to the Assets tab, select All Assets, and then in the Actions tab, select Add Asset.  Rather than going through a discovery this time, we will manually declare a new asset. When we declare it, we will give the hostname, IP address, system model that match those that have already been discovered.  Then, we will declare both GB_0 with its existing MAC and the new GB_4 with its MAC.  Remember that we collected the MAC for GB_4 when we created its device alias. After you declare the asset, you will see the new NIC in the connectivity tab for the asset.  You will notice that only the NICs you listed when you declared it are seen now.  If you want Ops Center to see all of the existing NICs as well as the additional one, declare them as well.  Add the other GB_1, GB_2, GB_3 links and their MACs just as you did GB_0 and GB_4.  Installing the OS  Once you have declared the asset, you can create an OS Provisioning profile for Solaris 11 in the same way that you did for Solaris 10.  The only difference from any other provisioning profile you might have created already is the network to use for installation.  Again, use GB_N/netN where N is the interface number you used for your device alias and in your declaration.  And away you go.  When the system boots from the network, the automated installer (AI) is able to see which system manifest to use, based on the new MAC that was associated, and the system gets installed. {0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net                      /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4                     /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cginetwork-boot-arguments =  host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2  File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2...SunOS Release 5.11 Version 11.0 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Remounting root read/writeProbing for device nodes ...Preparing network image for useDownloading solaris.zlib--2012-02-17 15:10:17--  http://10.140.204.22:5555/var/js/AI/sparc//solaris.zlibConnecting to 10.140.204.22:5555... connected.HTTP request sent, awaiting response... 200 OKLength: 126752256 (121M) [text/plain]Saving to: `/tmp/solaris.zlib'100%[======================================>] 126,752,256 28.6M/s   in 4.4s    2012-02-17 15:10:21 (27.3 MB/s) - `/tmp/solaris.zlib' saved [126752256/126752256] Conclusion So, why go to all of this trouble?  More and more, I find that customers are wiring their data center to only use higher speed networks - 10GbE only to the hosts.  Some customers are moving aggressively toward consolidated networks combining storage and network on CNA NICs.  All of this means that network-based provisioning cannot rely exclusively on the built-in network interfaces.  So, it's important to be able to provision a system using other than the built-in networks.  Turns out, that this is pretty straight-forward for both Solaris 10 and Solaris 11 and fits into the Ops Center deployment process quite nicely. Hopefully, you will be able to use this as you build out your own private cloud solutions with Ops Center.

    Read the article

  • CodePlex Daily Summary for Thursday, April 01, 2010

    CodePlex Daily Summary for Thursday, April 01, 2010New ProjectsASP.NET Bing Maps: Extensible and easy to use, this is ASP.NET Bing Maps Control. Drag & Drop and is ready to go. You can configure map mode, map style, add a PushPin...Bricks' Bane: Bricks' Bane is a brick breaker game developed using XNA and published on XBox Live Indy Games. Source code includes a C# library useful for game d...cURL for dotnet: Another dotnet binding for libcurl see http://curl.haxx.se for more info about cURL/libcurlCustom Functoid que acessa o banco de dados SQL: Functoid para Biztalk Server 2006 utilizando dados do SQL Server 2005FEI STU Pharmacy e-shop: Elektronicky obchod s liekmi Vytvorte jednoduchú klient-server aplikáciu, ktorá bude realizovať elektronický obchod s liekmi. Moduly: 1. e-shop f...Flavours of Wix: Investigating building DSL's to create installers based on WIXFulcrum: Fulcrum is a code generation framework built on top of the T4 technology in Visual Studio. GreviousAngel: New team projectHabanero Inferno: Habanero Inferno coming soon.Kawo Pounga !: A useless game !!!LetsXNA!!: This is a project created by members of Linked In group Lets XNA!! to build a XNA game and have fun in the process. The goal is to build a simple ...Linq To Naver , Custom Linq Provider for Naver searchengine OpenAPI: <project name>Linq to Naver </project name> <programming language>C#, CSharp</programming language>LocoSync: LocoSync is a file Syncronization/Backup/Archiver program, which is easily extendable. It is easy to add new syncronization methods using C# code.Natural Language Processing: Natural Language ProcessingNop Commerce Azure: Ce projet vous permet de mettre en place rapidement et simplement votre site d'e-commerce en ligne en bénéficiant de tous les avantages de la plate...Nwinsock: Nwinsock is a component for network , Object Transfer, Pocket Compression, Support TCP,UDP Protocol, Thread Base OnTime: OnTime is a simple program from that matching game back in the day just to bring light to programming techniques. It's developed in C#.?OpenGL ES 2.0 Compact Framework Wrapper: OpenGL ES 2.0 wrapper for .NET Compact Framework. Developed on HTC HD 2 device but should run on any Windows Mobile device that has the correct lib...ortaknokta: bu proje: birkaç kişinin bir araya gelip, istedikleri konularda tartışma yapmalarına olanak saglamak icin hazırlanmaya çalışıl maktadır. P-Data: P-Data es una herramienta que permite obtener información procedente de archivos de datos (Data Profiling) a través de consultas SQL, automatizando...PowerAuras: Addon for World of Warcraft - Displays effects on screen at different conditionsPowerShell ToodleDo Module: PowerShell Module for interacting with toodledo.com online To-Do list site. RSS Reader for Windows Phone 7: This RSS Reader application for windows 7Streamlet Containers: This is my implement of STL-style containers, including a dynamic array, a double-linked list and an r-b-tree. Just for practice. Please feel free...Troav: Social encyclopedia built using c# and the Orchard frameworkUmbraco App_Code/Usercontrol Editor: Package for Umbraco to add App_Code and usercontrol editing to the Developer section of the Umbraco administration system. Will support GeSHi editi...Vczh Reactive Programming Library: Reactive programming library provide a stream or state machine view to use .NET eventsWhoIs XML API: The project uses the public WhoIs XML API service (http://www.whoisxmlapi.com/) to obtain detailed details. The project is written in C# and serial...WPF FlowDocument Examples for VS2008 and VS2010: WPF Text Samples (especially FlowDocument) on the various possible effects: sub- and super-script, ruby (a.k.a. furigana), and various others...You are here (for Windows Mobile): This sample shows you how to play a *.wav file on your device with Compact Framework 2.0. There is better support for playing music on Compact F...New Releases( λunula ): Lunula 0.4.0: Changelog Implemented a virtual machine. Implemented a compiler for the virtual machine. Added first-class continuations (call/cc) Removed co...Alter gear SQL index Management: Setup 1.0.1: Changes Test connection - successful message Connection string timeout property added Setup Project added to project source code Possible issu...ASP.NET Bing Maps: ASP.NET Bing Maps 0.1b: Project Description Extensible and easy to use, this is ASP.NET Bing Maps Control. Drag & Drop and is ready to go. You can configure map mode, map ...ASP.NET MVC Validation Library: ASP.NET MVC Validation Library 1.3: Changes since 1.2: - Support remote validation - Support custom server-side validation - The design of validation attribute is improved Note: test...BigDays 2010: HelfenHelfen - v1: PLEASE NOTE: This project is published under the Microsoft Public License (Ms-PL). http://bigdays10.codeplex.com/license IT IS A DEMO SOLUTION FOR...Caps - Manage your collection!: Caps Console 0.1.4.0 Alpha: This is preview release (Alpha quality). This release contains only limited amount of fixes and new features from user point of view. Major focus f...CSharpQuery: Version 1.0: This version is stable. Please report any possible bugs. The next release will include a sample project and index management tools. Until then pl...Custom Functoid que acessa o banco de dados SQL: Custom Functoid SQL Server: Solução do Visual Studio com código fonte e script SQL do functoid em BiztalkDawf: Dual Audio Workflow: Beta 3: Suppose if two good audio events overlap in time with a videoevent of interest. (This can only happen if PluralEyes isn't used on everything). Befo...Dirac codec user interface: Dirac User Interface (checkin 37132): Same as 36795 version, but done with the last source code.DotNetNuke® Blog: 04.00.00 RC 3: PLEASE NOTE: You may upgrade an RC 2 install. But please do not upgrade previous version of the Beta releases - please start from RC 2 or 03.05.0...DotNetNuke® Skinning Extensions: SimpleTitle Skin Object: This is an example skin object that only renders the "page name" if used in a skin and the "module title" if used in a container. No extra spans, c...Fulcrum: Fulcrum v0.9: Initial release of FulcrumHelloTipi Photos Uploader: Version 2010.03.31: De toute petites corrections : - Correction du bouton envoyer - Impossible d'interagir avec l'application quand on uploadkdar: KDAR 0.0.18: KDAR - Kernel Debugger Anti Rootkit - dispacth table's signature bases updated ( many driver's) - scripts refactored - some bug fixedLegend: Legend Libraries: The latest release.Linq To Naver , Custom Linq Provider for Naver searchengine OpenAPI: Linq to Naver: Linq to NaverLive at Education Meta Web-Service: Live at Education Meta Web Service v. 1.0: We're happy to publish final version of Live at Education Meta Web Serivce (LAEMWS). In this release: Huge list of Windows Live ID enabled servic...Live@edu SSO WebPart for MOSS 2007: WebPart 2.0: This release is based on Live@edu Meta Web Service (laemws - http://laemws.codeplex.com). It is highly recomended to use laemws version of webpart,...LocoSync: LocoSync v0.1r2010.03.31 installer: This is the first public release. Unzip and run setup. Or if you have .net 3.5 runtime available download the exetutable and try...Natural Language Processing: test1: testNop Commerce Azure: Nop Commerce Azure: Nop Commerce Full Sources with additionnals Azure Projects.Nwinsock: NWinsock: Nwinsock version 1.0 is hereOpen NFe: DANFe v1.9.8: Correção CSTOpenGL ES 2.0 Compact Framework Wrapper: v0.1 Sources: First rough release. It has a working sample application which renders a triangle with rotation. Don't expect anything great. Just a very early ...patterns & practices - Windows Azure Guidance: Code Drop 3: Second iteration of a-Expense on Azure. This release builds on the previous one and mainly focuses on replacing SQL Azure by Table Storage. We hav...Posh4DNN: Posh4DNN Scripts 2.0: This release greatly increases the speed of installation and incorporates the use of IIS and SQL Server Snap-ins for managing those services. Inst...Process Enactment Tool Framework: PET 1.1: PET Core new intermediate model with arbitrary "clean" relations among objects and several updates of the object fields (see DependencyInterfacesA...Project Tru Tiên: Elements-test V1-fix (v1): Là Elements-test V1 đã được fix các vấn đề sau: - Fix lỗi hiển thị thú cưỡi Hổ Kỳ Lân - Fix hiển thị tab tiếng trung --> sang tiếng việt - Fix hiể...Sentinel - Log Viewer: Sentinel 0.8.1 (nLog support): Build of the 0.8.1 code (svn revision 36823) which included support for both nLog and log4net that has been in SVN for a while but didn't have a bi...sgMotion Animation Library: SgMotion v1.1 (For Sunburn 1.3.1): SgMotion v1.1 (For Sunburn 1.3.1) This release includes both a Windows & Xbox sample. The sample is set to default at Forward rendering, but can e...sTASKedit: sTASKedit 44538 (Developer Alpha): + nearly all fields are viewed in this release for task verification and identifying of unknownsTest Project (ignore): asdf asdf asdf asdf asdf asdf asdf sadf sdf asdf a: ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ...Test Project (ignore): cdscs: csdcacacTroav: Traov20100331 Source Pre-Alpah: This is some experiements with implementing custom modules with Microsoft's Orchard frame work. This is very preliminary, and subject to change.Weather Report WebControls: WebWeatherReport: 主要文件的源代码WhoIs XML API: Initial Release: Initial ReleaseYou are here (for Windows Mobile): CAB file and Source Code: You can find more Controls and samples for Windows Mobile developers at: http://www.beemobile4.netMost Popular ProjectshmrEngineRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsRawrGraffiti CMSBase Class LibrariesjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationN2 CMSLINQ to TwitterManaged Extensibility FrameworkFarseer Physics Engine

    Read the article

  • Install Control Center Agent on Oracle Application Server

    - by qianqian.wu
    Control Center Agent (CCA) The Control Center Agent is the OWB component that runs the Template Mappings in the Oracle Containers for J2EE (OC4J) server; also referred to as the J2EE Runtime. The Control Center Agent provides a Java-based runtime environment that can be installed on Oracle and non-Oracle database hosts. The Control Center Agent provides fundamental infrastructure for the heterogeneous, Code Template-based mapping support and Web services-related features of OWB in this release. In Oracle Warehouse Builder 11gR2 the Control Center Agent, by default will run in the built-in OC4J that is bundled in the Oracle Home. Besides that, you also have ability to install the Control Center Agent in an Oracle Application Server install. In this article, you will find step-by-step instructions how to install the Control Center Agent on an Oracle Application Server instance. The instructions cover the following tasks: Task 1: Install and Configure the Application Server Task 2: Deploy the Control Center Agent to the Application Server Task 3: Optional Configuration Tasks   Task 1: Install and Configure the Application Server Before configuring the Application Server, you need to install it from Oracle Application Server CD-ROM, or by downloading the installation program from Oracle Technology Network (OTN). Once the installation is completed, you are ready to configure the Application Server. The purpose of the configuration task is to make sure the Control Center Agent ear file can be deployed and runs in the Application Server successfully. The essential configuration tasks are outlined below: · Modify the OC4J Startup Script · Set up Control Center Agent Server Side Logging · Set up Audit Table Data Source · Copy ct_permissions.properties File · Set up Security Roles for Control Center Agent · Create JMS Queues · Install JDBC Drivers to OC4J Modify the OC4J Startup Script The OC4J startup script “opmn.xml” is located in Application Server configuration directory, $AS_HOME/opmn/conf. $AS_HOME stands for the root home directory of the application server. Open the file opmn.xml in a text editor, and alter the contents of the file as displayed in the following sample. You need to make sure that: The MaxPerSize is set to 128M. This is to ensure that you allocate enough PermGen space to OC4J to run Control Center Agent. This will prevent java.lang.OutOfMemoryError when running the agent. The Python.path sets the path for the Python library files used by the Control Center Agent: jython_lib.zip and jython_owblib.jar. These two files are in the $OWB_HOME/owb/lib/int directory, where $OWB_HOME is the directory where owb is installed. · The km_security_needed determines whether restrictions will be applied to the kinds of operating system commands allowed to be executed by the OWB Code Template script executed by Control Center Agent. Setting km_security_needed to “true” enforces such restriction while setting it to “false” removes such restrictions. Set up Control Center Agent Server Side Logging Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file j2ee-logging.xml in a text editor and add the following lines to the log handler section. The jrt-internal-log-handler is the handler used by Control Center Agent runtime logger to create log files. Then add the following entry into the loggers section to create the logger for Control Center Agent runtime auditing. Set up Audit Table Data Source To enable Audit Table logging, a managed data source and connection pool need to be set up before Control Center Agent deployment. Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file data-sources.xml in a text editor. Define the audit data source shown below in the file, <managed-data-source name="AuditDS" connection-pool-name="OWBSYS Audit   Connection Pool" jndi-name="jdbc/AuditDS"/> <connection-pool name="OWBSYS Audit Connection Pool">   <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"     user="owbsys_audit" password="owbsys_audit"     url="jdbc:oracle:thin:@//localhost:1521/ORCL"/> </connection-pool> Copy ct_permissions.properties File The ct_permissions.properties can be obtained from $OWB_HOME /owb/jrt/config/ directory. You need to copy the file to $AS_HOME/j2ee/home/config directory.This properties file takes effect when the setting km-security is set to true in Control Center Agent. By default the ALLOWED_CMD is commented out in ct_permissions.properties file. This prevents all system command from being invoked from scripts executed in Control Center Agent (when km-security is set to true). To allow certain system commands to be invoked, ALLOWED_CMD needs to be uncommented out, and the system commands (allowed to be invoked) need to be added to the ALLOWED_CMD. Set up Security Roles for Control Center Agent You can set up the Control Center Agent security roles through Oracle Enterprise Manager. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Security. Click the task icon next to Security Providers. 2. On Security Providers page click on the button “Instance Level Security”. On Instance Level Security page, go to “Realms” tab. You will see a row for the default realm “jazn.com” in the results table. It has a “Roles” column and a “Users” column. Click on the number in “Roles” column. In the “Roles” page it will display all the roles available for the realm. Click on “Create” button to create a new role “OWB_J2EE_ EXECUTOR”. 3. On the Add Role screen, enter Name OWB_J2EE_EXECUTOR, and click OK. 4. Follow the same steps as before, and create a new role “OWB_J2EE_OPERATOR”. 5. Assign role “oc4j-administrators” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_OPERATOR” by moving these roles from “Available Roles” and click “OK” to save. 6. Go back to Instance Level Security page and create a new role “OWB_J2EE_ADMINISTRATOR”. 7. Assign roles “OWB_J2EE_ OPERATOR” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_ ADMINISTRATOR” by moving these roles from “Available Roles” and click “OK” to save. 8.Go back to Instance Level Security page. This time, click on the number in “Users” column for the realm “jazn.com”. In the “Users” page, it shows all the users defined for this realm. Locate the user “oc4jadmin” in the results table and click on it. 9. Assign the roles “OWB_J2EE_ADMINISTRATOR” and “oc4j-app-administrators” to this user by moving the role from the “Available Roles” selection box to “Selected Roles” box and click “Apply” to save. 10. Go back to Instance Level Security page and create a new role “OWB_INTERNAL_USERS”, assign no user or role to this role. Simply click “OK” to create this role. Now you have finished creating the security roles required for Control Center Agent. Create JMS Queues You need to create two JMS queues for Control Center Agent: owbQueue and abort_owbQueue. 1. Now go to OC4J home Page. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Services and then expand Enterprise Messaging Service. Click the task icon next to JMS Destinations. 2. On JMS Destinations page, click “Create New” button to create a new JMS queue. On Add Destination page, choose “Queue” as Destination Type. Put “owbQueue” as Destination Name. Select “In Memory Persistence Only” as the Persistence Type and put “jms/owbQueue” as JNDI Location and click on “OK” to finish. 3. Follow the same instruction as above to create the owb_abortQueue. Now you have finished creating the JMS queues required for Control Center Agent. Install JDBC Drivers to OC4J In order to execute Code Templates using commercial databases other than Oracle, e.g. DB2, SQL Server etc, the corresponding jdbc driver files need to be added to $AS_HOME/j2ee/home/applib directory. 1. To install other JDBC drivers to OC4J, first obtain the .jar file containing the JDBC driver. All the external JDBC drivers .jar files can be found in the directory: $OWB_HOME/owb/lib/ext/. For DB2, the files needed are db2jcc.jar and db2jcc_license_cu.jar. For SQL Server the file is sqljdbc.jar. For sunopsis JDBC drivers, the file needed is snpsxmlo.jar. 2. Copy the required JDBC driver file into the directory $AS_HOME/j2ee/home/applib. Now you have finished the Application Server configuration. To make the configuration to take an effect, you need to restart the Application Server.   Task 2: Deploy the Control Center Agent to the Application Server Now you can deploy the Control Center Agent to the Application Server. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Applications tab. Click Deploy to begin deploying Control Center Agent. 2. On the Deploy: Select Archive screen, under Archive, select Archive is present on local host. Upload the archive to the server where Application Server Control is running. Click Browse and locate the jrt.ear file in the $OWB_HOME/owb/jrt/applications directory. Under Deployment Plan, select Automatically create a new deployment plan. Click Next. 3. Wait for the ear file to be uploaded to Application Server. On the Deploy: Application Attributes screen, enter Application Name jrt, and Context Root jrt. Leave the other attributes at their default values. Click Next. 4. On Deploy: Deployment Settings screen, leave all attributes at their default values, and click Deploy. This will take about 1 minute or so and when the application is deployed successfully, a confirmation message will be displayed. Now the Control Center Agent is started automatically. Go back to OC4J home page and click on Applications tab to make sure the deployed application jrt is showing in the applications list.   Task 3: Optional Configuration Tasks The optional configuration tasks contain: · Secure Control Center Agent Web Service · Setting the PATH Environment Variable Secure Control Center Agent Web Service If you want to use JRTWebService with a secure website, you need to do the following steps, 1. Create a file “secure-web-site.xml” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. A sample secure-web-site.xml is shown as below. We need to modify the “protocol” to “https”, and “secure” to “true”, also choose an port as the secure http port. Also we need to add the entry “ssl-config” in the file. Remember to use the absolute path for the key store file. 2. Modify the file “server.xml” that is located at $AS_HOME/j2ee/home/config directory. Then add the <web-site> element in the file for the secure-web-site. 3. Create a key store file “serverkeystore.jks” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. After the three files are altered, restart the application server. Now you can access the JRTWebService in SSL way through https://hostname:4443/jrt/webservice. Setting the PATH Environment Variable Sometimes, some system commands such as linux ls, sh etc, can not be executed successfully during the script execution due to they are not found in PATH. To ensure they work normally, you can setup the environment variable PATH. Let’s navigate to the Enterprise Manager Homepage. 1. Go to OC4J home screen and click the Administration tab. Expand Administration Tasks, then expand Properties. Click the task icon next to Server Properties. 2. On the Server Properties screen, scroll down to Environment Variables section. Under Environment Variables, click Add Another Row. Enter PATH in Name, and fill Value with directories that contain the system commands. Click Apply.   After you work through this article, I believe you have developed a deeper understanding of the Control Center Agent installation process, and you can apply this knowledge in other installation plan such as Control Center Agent installation on Standalone OC4J.

    Read the article

  • Azure WNS to Win8 - Push Notifications for Metro Apps

    - by JoshReuben
    Background The Windows Azure Toolkit for Windows 8 allows you to build a Windows Azure Cloud Service that can send Push Notifications to registered Metro apps via Windows Notification Service (WNS). Some configuration is required - you need to: Register the Metro app for Windows Live Application Management Provide Package SID & Client Secret to WNS Modify the Azure Cloud App cscfg file and the Metro app package.appxmanifest file to contain matching Metro package name, SID and client secret. The Mechanism: These notifications take the form of XAML Tile, Toast, Raw or Badge UI notifications. The core engine is provided via the WNS nuget recipe, which exposes an API for constructing payloads and posting notifications to WNS. An application receives push notifications by requesting a notification channel from WNS, which returns a channel URI that the application then registers with a cloud service. In the cloud service, A WnsAccessTokenProvider authenticates with WNS by providing its credentials, the package SID and secret key, and receives in return an access token that the provider caches and can reuse for multiple notification requests. The cloud service constructs a notification request by filling out a template class that contains the information that will be sent with the notification, including text and image references. Using the channel URI of a registered client, the cloud service can then send a notification whenever it has an update for the user. The package contains the NotificationSendUtils class for submitting notifications. The Windows Azure Toolkit for Windows 8 (WAT) provides the PNWorker sample pair of solutions - The Azure server side contains a WebRole & a WorkerRole. The WebRole allows submission of new push notifications into an Azure Queue which the WorkerRole extracts and processes. Further background resources: http://watwindows8.codeplex.com/ - Windows Azure Toolkit for Windows 8 http://watwindows8.codeplex.com/wikipage?title=Push%20Notification%20Worker%20Sample - WAT WNS sample setup http://watwindows8.codeplex.com/wikipage?title=Using%20the%20Windows%208%20Cloud%20Application%20Services%20Application – using Windows 8 with Cloud Application Services A bit of Configuration Register the Metro apps for Windows Live Application Management From the current app manifest of your metro app Publish tab, copy the Package Display Name and the Publisher From: https://manage.dev.live.com/Build/ Package name: <-- we need to change this Client secret: keep this Package Security Identifier (SID): keep this Verify the app here: https://manage.dev.live.com/Applications/Index - so this step is done "If you wish to send push notifications in your application, provide your Package Security Identifier (SID) and client secret to WNS." Provide Package SID & Client Secret to WNS http://msdn.microsoft.com/en-us/library/windows/apps/hh465407.aspx - How to authenticate with WNS https://appdev.microsoft.com/StorePortals/en-us/Account/Signup/PurchaseSubscription - register app with dashboard - need registration code or register a new account & pay $170 shekels http://msdn.microsoft.com/en-us/library/windows/apps/hh868184.aspx - Registering for a Windows Store developer account http://msdn.microsoft.com/en-us/library/windows/apps/hh868187.aspx - Picking a Microsoft account for the Windows Store The WNS Nuget Recipe The WNS Recipe is a nuget package that provides an API for authenticating against WNS, constructing payloads and posting notifications to WNS. After installing this package, a WnsRecipe assembly is added to project references. To send notifications using WNS, first register the application at the Windows Push Notifications & Live Connect portal to obtain Package Security Identifier (SID) and a secret key that your cloud service uses to authenticate with WNS. An application receives push notifications by requesting a notification channel from WNS, which returns a channel URI that the application then registers with a cloud service. In the cloud service, the WnsAccessTokenProvider authenticates with WNS by providing its credentials, the package SID and secret key, and receives in return an access token that the provider caches and can reuse for multiple notification requests. The cloud service constructs a notification request by filling out a template class that contains the information that will be sent with the notification, including text and image references.Using the channel URI of a registered client, the cloud service can then send a notification whenever it has an update for the user. var provider = new WnsAccessTokenProvider(clientId, clientSecret); var notification = new ToastNotification(provider) {     ToastType = ToastType.ToastText02,     Text = new List<string> { "blah"} }; notification.Send(channelUri); the WNS Recipe is instrumented to write trace information via a trace listener – configuratively or programmatically from Application_Start(): WnsDiagnostics.Enable(); WnsDiagnostics.TraceSource.Listeners.Add(new DiagnosticMonitorTraceListener()); WnsDiagnostics.TraceSource.Switch.Level = SourceLevels.Verbose; The WAT PNWorker Sample The Azure server side contains a WebRole & a WorkerRole. The WebRole allows submission of new push notifications into an Azure Queue which the WorkerRole extracts and processes. Overview of Push Notification Worker Sample The toolkit includes a sample application based on the same solution structure as the one created by theWindows 8 Cloud Application Services project template. The sample demonstrates how to off-load the job of sending Windows Push Notifications using a Windows Azure worker role. You can find the source code in theSamples\PNWorker folder. This folder contains a full version of the sample application showing how to use Windows Push Notifications using ASP.NET Membership as the authentication mechanism. The sample contains two different solution files: WATWindows.Azure.sln: This solution must be opened with Visual Studio 2010 and contains the projects related to the Windows Azure web and worker roles. WATWindows.Client.sln: This solution must be opened with Visual Studio 11 and contains the Windows Metro style application project. Only Visual Studio 2010 supports Windows Azure cloud projects so you currently need to use this edition to launch the server application. This will change in a future release of the Windows Azure tools when support for Visual Studio 11 is enabled. Important: Setting up the PNWorker Sample Before running the PNWorker sample, you need to register the application and configure it: 1. Register the app: To register your application, go to the Windows Live Application Management site for Metro style apps at https://manage.dev.live.com/build and sign in with your Windows Live ID. In the Windows Push Notifications & Live Connect page, enter the following information. Package Display Name PNWorker.Sample Publisher CN=127.0.0.1, O=TESTING ONLY, OU=Windows Azure DevFabric 2. 3. Once you register the application, make a note of the values shown in the portal for Client Secret,Package Name and Package SID. 4. Configure the app - double-click the SetupSample.cmd file located inside the Samples\PNWorker folder to launch a tool that will guide you through the process of configuring the sample. setup runs a PowerShell script that requires running with administration privileges to allow the scripts to execute in your machine. When prompted, enter the Client Secret, Package Name, and Package Security Identifier you obtained previously and wait until the tool finishes configuring your sample. Running the PNWorker Sample To run this sample, you must run both the client and the server application projects. 1. Open Visual Studio 2010 as an administrator. Open the WATWindows.Azure.sln solution. Set the start-up project of the solution as the cloud project. Run the app in the dev fabric to test. 2. Open Visual Studio 11 and open the WATWindows.Client.sln solution. Run the Metro client application. In the client application, click Reopen channel and send to server. à the application opens the channel and registers it with the cloud application, & the Output area shows the channel URI. 3. Refresh the WebRole's Push Notifications page to see the UI list the newly registered client. 4. Send notifications to the client application by clicking the Send Notification button. Setup 3 command files + 1 powershell script: SetupSample.cmd –> SetupWPNS.vbs –> SetupWPNS.cmd –> SetupWPNS.UpdateWPNSCredentialsInServiceConfiguration.ps1 appears to set PackageName – from manifest Client Id package security id (SID) – from registration Client Secret – from registration The following configs are modified: WATWindows\ServiceConfiguration.Cloud.cscfg WATWindows\ServiceConfiguration.Local.cscfg WATWindows.Client\package.appxmanifest WatWindows.Notifications A class library – it references the following WNS DLL: C:\WorkDev\CountdownValue\AzureToolkits\WATWindows8\Samples\PNWorker\packages\WnsRecipe.0.0.3.0\lib\net40\WnsRecipe.dll NotificationJobRequest A DataContract for triggering notifications:     using System.Runtime.Serialization; using Microsoft.Windows.Samples.Notifications;     [DataContract]     [KnownType(typeof(WnsAccessTokenProvider))] public class NotificationJobRequest     {               [DataMember] public bool ProcessAsync { get; set; }          [DataMember] public string Payload { get; set; }         [DataMember] public string ChannelUrl { get; set; }         [DataMember] public NotificationType NotificationType { get; set; }         [DataMember] public IAccessTokenProvider AccessTokenProvider { get; set; }         [DataMember] public NotificationSendOptions NotificationSendOptions{ get; set; }     } Investigated these types: WnsAccessTokenProvider – a DataContract that contains the client Id and client secret NotificationType – an enum that can be: Tile, Toast, badge, Raw IAccessTokenProvider – get or reset the access token NotificationSendOptions – SecondsTTL, NotificationPriority (enum), isCache, isRequestForStatus, Tag   There is also a NotificationJobSerializer class which basically wraps a DataContractSerializer serialization / deserialization of NotificationJobRequest The WNSNotificationJobProcessor class This class wraps the NotificationSendUtils API – it periodically extracts any NotificationJobRequest objects from a CloudQueue and submits them to WNS. The ProcessJobMessageRequest method – this is the punchline: it will deserialize a CloudQueueMessage into a NotificationJobRequest & send pass its contents to NotificationUtils to SendAsynchronously / SendSynchronously, (and then dequeue the message).     public override void ProcessJobMessageRequest(CloudQueueMessage notificationJobMessageRequest)         { Trace.WriteLine("Processing a new Notification Job Request", "Information"); NotificationJobRequest pushNotificationJob =                 NotificationJobSerializer.Deserialize(notificationJobMessageRequest.AsString); if (pushNotificationJob != null)             { if (pushNotificationJob.ProcessAsync)                 { Trace.WriteLine("Sending the notification asynchronously", "Information"); NotificationSendUtils.SendAsynchronously( new Uri(pushNotificationJob.ChannelUrl),                         pushNotificationJob.AccessTokenProvider,                         pushNotificationJob.Payload,                         result => this.ProcessSendResult(pushNotificationJob, result),                         result => this.ProcessSendResultError(pushNotificationJob, result),                         pushNotificationJob.NotificationType,                         pushNotificationJob.NotificationSendOptions);                 } else                 { Trace.WriteLine("Sending the notification synchronously", "Information"); NotificationSendResult result = NotificationSendUtils.Send( new Uri(pushNotificationJob.ChannelUrl),                         pushNotificationJob.AccessTokenProvider,                         pushNotificationJob.Payload,                         pushNotificationJob.NotificationType,                         pushNotificationJob.NotificationSendOptions); this.ProcessSendResult(pushNotificationJob, result);                 }             } else             { Trace.WriteLine("Could not deserialize the notification job", "Error");             } this.queue.DeleteMessage(notificationJobMessageRequest);         } Investigation of NotificationSendUtils class - This is the engine – it exposes Send and a SendAsyncronously overloads that take the following params from the NotificationJobRequest: Channel Uri AccessTokenProvider Payload NotificationType NotificationSendOptions WebRole WebRole is a large MVC project – it references WatWindows.Notifications as well as the following WNS DLL: \AzureToolkits\WATWindows8\Samples\PNWorker\packages\WnsRecipe.0.0.3.0\lib\net40\NotificationsExtensions.dll Controllers\PushNotificationController.cs Notification related namespaces:     using Notifications;     using NotificationsExtensions;     using NotificationsExtensions.BadgeContent;     using NotificationsExtensions.RawContent;     using NotificationsExtensions.TileContent;     using NotificationsExtensions.ToastContent;     using Windows.Samples.Notifications; TokenProvider – initialized from the Azure RoleEnvironment:   IAccessTokenProvider tokenProvider = new WnsAccessTokenProvider(         RoleEnvironment.GetConfigurationSettingValue("WNSPackageSID"),         RoleEnvironment.GetConfigurationSettingValue("WNSClientSecret")); SendNotification method – calls QueuePushMessage method to create and serialize a NotificationJobRequest and enqueue it in a CloudQueue [HttpPost]         public ActionResult SendNotification(             [ModelBinder(typeof(NotificationTemplateModelBinder))] INotificationContent notification,             string channelUrl,             NotificationPriority priority = NotificationPriority.Normal)         {             var payload = notification.GetContent();             var options = new NotificationSendOptions()             {                 Priority = priority             };             var notificationType =                 notification is IBadgeNotificationContent ? NotificationType.Badge :                 notification is IRawNotificationContent ? NotificationType.Raw :                 notification is ITileNotificationContent ? NotificationType.Tile :                 NotificationType.Toast;             this.QueuePushMessage(payload, channelUrl, notificationType, options);             object response = new             {                 Status = "Queued for delivery to WNS"             };             return this.Json(response);         } GetSendTemplate method: Create the cshtml partial rendering based on the notification type     [HttpPost]         public ActionResult GetSendTemplate(NotificationTemplateViewModel templateOptions)         {             PartialViewResult result = null;             switch (templateOptions.NotificationType)             {                 case "Badge":                     templateOptions.BadgeGlyphValueContent = Enum.GetNames(typeof( GlyphValue));                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;                 case "Raw":                     ViewBag.ViewData = templateOptions;                     result = PartialView("_Raw");                     break;                 case "Toast":                     templateOptions.TileImages = this.blobClient.GetAllBlobsInContainer(ConfigReader.GetConfigValue("TileImagesContainer")).OrderBy(i => i.FileName).ToList();                     templateOptions.ToastAudioContent = Enum.GetNames(typeof( ToastAudioContent));                     templateOptions.Priorities = Enum.GetNames(typeof( NotificationPriority));                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;                 case "Tile":                     templateOptions.TileImages = this.blobClient.GetAllBlobsInContainer(ConfigReader.GetConfigValue("TileImagesContainer")).OrderBy(i => i.FileName).ToList();                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;             }             return result;         } Investigated these types: ToastAudioContent – an enum of different Win8 sound effects for toast notifications GlyphValue – an enum of different Win8 icons for badge notifications · Infrastructure\NotificationTemplateModelBinder.cs WNS Namespace references     using NotificationsExtensions.BadgeContent;     using NotificationsExtensions.RawContent;     using NotificationsExtensions.TileContent;     using NotificationsExtensions.ToastContent; Various NotificationFactory derived types can server as bindable models in MVC for creating INotificationContent types. Default values are also set for IWideTileNotificationContent & IToastNotificationContent. Type factoryType = null;             switch (notificationType)             {                 case "Badge":                     factoryType = typeof(BadgeContentFactory);                     break;                 case "Tile":                     factoryType = typeof(TileContentFactory);                     break;                 case "Toast":                     factoryType = typeof(ToastContentFactory);                     break;                 case "Raw":                     factoryType = typeof(RawContentFactory);                     break;             } Investigated these types: BadgeContentFactory – CreateBadgeGlyph, CreateBadgeNumeric (???) TileContentFactory – many notification content creation methods , apparently one for every tile layout type ToastContentFactory – many notification content creation methods , apparently one for every toast layout type RawContentFactory – passing strings WorkerRole WNS Namespace references using Notifications; using Notifications.WNS; using Windows.Samples.Notifications; OnStart() Method – on Worker Role startup, initialize the NotificationJobSerializer, the CloudQueue, and the WNSNotificationJobProcessor _notificationJobSerializer = new NotificationJobSerializer(); _cloudQueueClient = this.account.CreateCloudQueueClient(); _pushNotificationRequestsQueue = _cloudQueueClient.GetQueueReference(ConfigReader.GetConfigValue("RequestQueueName")); _processor = new WNSNotificationJobProcessor(_notificationJobSerializer, _pushNotificationRequestsQueue); Run() Method – poll the Azure Queue for NotificationJobRequest messages & process them:   while (true)             { Trace.WriteLine("Checking for Messages", "Information"); try                 { Parallel.ForEach( this.pushNotificationRequestsQueue.GetMessages(this.batchSize), this.processor.ProcessJobMessageRequest);                 } catch (Exception e)                 { Trace.WriteLine(e.ToString(), "Error");                 } Trace.WriteLine(string.Format("Sleeping for {0} seconds", this.pollIntervalMiliseconds / 1000)); Thread.Sleep(this.pollIntervalMiliseconds);                                            } How I learned to appreciate Win8 There is really only one application architecture for Windows 8 apps: Metro client side and Azure backend – and that is a good thing. With WNS, tier integration is so automated that you don’t even have to leverage a HTTP push API such as SignalR. This is a pretty powerful development paradigm, and has changed the way I look at Windows 8 for RAD business apps. When I originally looked at Win8 and the WinRT API, my first opinion on Win8 dev was as follows – GOOD:WinRT, WRL, C++/CX, WinJS, XAML (& ease of Direct3D integration); BAD: low projected market penetration,.NET lobotomized (Only 8% of .NET 4.5 classes can be used in Win8 non-desktop apps - http://bit.ly/HRuJr7); UGLY:Metro pascal tiles! Perhaps my 80s teenage years gave me a punk reactionary sense of revulsion towards the Partridge Family 70s style that Metro UX seems to have appropriated: On second thought though, it simplifies UI dev to a single paradigm (although UX guys will need to change career) – you will not find an easier app dev environment. Speculation: If LightSwitch is going to support HTML5 client app generation, then its a safe guess to say that vnext will support Win8 Metro XAML - a much easier port from Silverlight XAML. Given the VS2012 LightSwitch integration as a thumbs up from the powers that be at MS, and given that Win8 C#/XAML Metro apps tend towards a streamlined 'golden straight-jacket' cookie cutter app dev style with an Azure back-end supporting Win8 push notifications... --> its easy to extrapolate than LightSwitch vnext could well be the Win8 Metro XAML to Azure RAD tool of choice! The hook is already there - :) Why else have the space next to the HTML Client box? This high level of application development abstraction will facilitate rapid app cookie-cutter architecture-infrastructure frameworks for wrapping any app. This will allow me to avoid too much XAML code-monkeying around & focus on my area of interest: Technical Computing.

    Read the article

  • CodePlex Daily Summary for Wednesday, May 14, 2014

    CodePlex Daily Summary for Wednesday, May 14, 2014Popular ReleasesQuickMon: Version 3.10: Adding the ability to see 'history' of Collector states (including details of errors or warnings at that time). The history size is configurable (default is switched off) and the Windows Service completely ignores keeping history (no UI or user to access it anyway). The Collector stats window now displays this history plus multiple collector stats windows can be opened at the same time. Additionally fixed a bug in the event log collector that reported an 'Error' state when an 'out of bounds' ...xFunc: xFunc 2.15.4: Fixed bug in Processor.csTFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...WinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.MVCwCMS - ASP.NET MVC CMS: MVCwCMS 2.2.2: Updated CKFinder config. For the installation instructions visit the documentation page: https://mvcwcms.codeplex.com/documentationTerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...ExtJS based ASP.NET Controls: FineUI v4.0.6: FineUI(???) ?? ExtJS ??? ASP.NET ??? FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ??????? ?????? IE 8.0+、Chrome、Firefox、Opera、Safari ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license) ???? ??:http://fineui.com/ ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI ???? ExtJS ????????,???? ExtJS ?,?????: 1. ????? FineUI ? ExtJS ? http://fineui.com/bbs/forum.ph...Office App Model Samples: Office App Model Samples v2.0: Office App Model Samples v2.0Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelWrapper for the PAYMILL API: Paymill API Wrapper: Add Description in PreauthorizationHow to develop an autodialer / predictive dialer in C#: VoIP AutoDialer in C Sharp: This is the downloadable source code for this example project that is intended to help you in developing your own VoIP autodialer application in C#.R.NET: R.NET 1.5.12: R.NET 1.5.12 is a beta release towards R.NET 1.6. You are encouraged to use 1.5.12 now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.12: The C stack limit was not disabled on Windows. For reasons possibly peculiar to R, this means that non-concurrent access to R from multiple threads was not stable. This is now fixed, with the fix validated with a unit test. Thanks to Odugen, skyguy94, and previously others (evolvedmicrobe, tomasp) fo...CTI Text Encryption: CTI Text Encryption 5.2: Change log: 5.2 - Remove Cut button. - Fixed Reset All button does not reset encrypted text column. - Switch button location between Copy and Paste. - Enable users to use local fonts to display characters of their language correctly. (A font settings file will be saved at the same folder of this program.) 5.1 - Improve encryption process. - Minor UI update. - Version 5.1 is not compatible with older version. 5.0 - Improve encryption algorithm. - Simply inner non-encryption related mec...SEToolbox: SEToolbox 01.029.006 Release 1: Fix to allow keyboard search on load dialog. (type the first few letters of your save) Fixed check for new release. Changed the way ship details are loaded to alleviate load time for worlds with very large ships (100,000+ blocks). Fixed Image importer, was incorrectly listing 'Asteroid' as import option. Minor changes to menus (text and appearance) for clarity and OS consistency. Added in reading of world palette for color dialog editor. WIP on subsystem editor. Can now multiselec...Tiny Wifi Host: Tiny Wifi Host 3.0.0.0: Tiny Wifi Hotspot Creator (Portable) v3 size: 50KB-140KB New Features: Friendly name for connected devices instead of Mac-Address (Double click selected device to enter friendly name) Saves device names to devices.xml Better error reporting+solutions Warning sound when number of connected devices exceed a certain number. (useful when only certain number of devices must be connected at a time) Many Bug Fixes. NoAudio files does not include connect, disconnect and warning audio to dec...Media Companion: Media Companion MC3.597b: Thank you for being patient, againThere are a number of fixes in place with this release. and some new features added. Most are self explanatory, so check out the options in Preferences. Couple of new Features:* Movie - Allow save Title and Sort Title in Title Case format. * Movie - Allow save fanart.jpg if movie in folder. * TV - display episode source. Get episode source from episode filename. Fixed:* Movie - Added Fill Tags from plot keywords to Batch Rescraper. * Movie - Fixed TMDB s...SimCityPak: SimCityPak 0.3.0.0: Contains several bugfixes, newly identified properties and some UI improvements. Main new features UI overhaul for the main index list: Icons for each different index, including icons for different property files Tooltips for all relevant fields Removed clutter Identified hundreds of additional properties (thanks to MaxisGuillaume) - this should make modding gameplay easierNew ProjectsAlumno-Materia-Inscripcion: NADIA DEJATE DE JODEEERAndroid_Training_Leasing: Android Training LeasingBob The Simple Text Game: Bob The Simple Text Game is a Simple Text GameConference Booking System: Web application with the purpose of easily managing meetings in an office with multiple companiesCRM Web API Lead Capture Example: Sample Visual Studio 2013 project that provides an example of how you could use Web API and Microsoft Azure to capture HTML form data.FoosballEye: Foosball ranking application - allow to create simple ranking of foosball players base on played matches.Frequency Analyzer: Tool to perform frequency analysis on any text-based cryptogram. fromen_playground: We do stuff!!!!Galaktika ERP Helper: ??????????????? ???????, ??????????????? ??? ?????????? ?????????? ????????? ??????????, ???????????? ?????? ?? ??????? «????????? ERP»gitprojtest5132014: awdfHtml Markup Minifier (Orchard Module): Orchard module designed to reduce size of output HTML to bare minimum while maintaining same functionality. Faster loading, less bandwidth use.ID3 Hunter: The ID3 Hunter is a simple application that uses the Last.FM music database to automatically detect song metadata for MP3 files.Jquery Dirty Flag: Smart Way to Manage Dirty Flag Using JqueryJsxyUIS: ??????????????????????NetDirkFramework: NetDirkFramework?????.NET/ASP.NETMVC/WebAPI/ADO.NET/EF、jQuery?jEasyUI??????、??????MIS????????????。?????,?????????????????????????????????????????????。ocbizweb: ocbizwebPower Pole Survey: This is a showcase of my knowledge in MVVM Patterns.prestamosapi: prestamosapiRedLineTest: This is a test of the online collaboration tooling from MS. We are all using Visual Studio 2010.SharePoint Database Explorer: Connect to any SharePoint 2010 or 2013 content database to view and download documents, metadata and list items.Systematize: to arrange in accord with a definite plan or scheme : order systematically <the need to systematize their work>Visualizers: This project is used for how we want visualize our Data in debug mode For Visual studio 2010,zSILENCER: reverse MKULTRA??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ????-????【??】????????: ?????????????????????,????????????,?????、??、????,?????,??????! ?????-?????【??】?????????: ???????????????????,???、???!???????,????????????????,????????????,???! ?????-?????【??】?????????: ????????????、?????、?????、?????、?????、????,???????????,?????,??????! ????-????【??】????????: ????????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、?????。 ??????-??????【??】??????????: ????????????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ????????????????、?????,????????????????????,????,????,??????。 ????-????【??】????????: ????????????????,????,??.??.??.??.??.??.??.???,????,???????! ?????-?????【??】?????????: ???????????????????????????:???????,??????,????,????,????,?????! ?????-?????【??】?????????: ?????????????,????????,?????,???,???????????,???????????,?????,??????! ??????-??????【??】??????????: ??????????,??????????????????????,???????????????,?????????????! ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。 ????-????【??】????????: ???????????????????,?????????/?,,???????????,??????????????! ?????-?????【??】?????????: ????????????????????,?????????、??、??、????,??????????,?????????????! ?????-?????【??】?????????: ????????????????、????、????、??????????,???,?????,???????????????. ????-????【??】????????: ?????????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ????-????【??】????????: ????????????????、?????、?????、????、?????,??????????。????????????????! ?????-?????【??】?????????: ??????????????????????????,??????????,????,????,?????????、??????,??????。 ?????-?????【??】?????????: ????????????????????????????,??????????,????,????,?????????、??????,??????。

    Read the article

  • CodePlex Daily Summary for Tuesday, May 13, 2014

    CodePlex Daily Summary for Tuesday, May 13, 2014Popular ReleasesWinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.MVCwCMS - ASP.NET MVC CMS: MVCwCMS 2.2.2: Updated CKFinder config. For the installation instructions visit the documentation page: https://mvcwcms.codeplex.com/documentationTerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...ExtJS based ASP.NET Controls: FineUI v4.0.6: FineUI(???) ?? ExtJS ??? ASP.NET ??? FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ??????? ?????? IE 8.0+、Chrome、Firefox、Opera、Safari ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license) ???? ??:http://fineui.com/ ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI ???? ExtJS ????????,???? ExtJS ?,?????: 1. ????? FineUI ? ExtJS ? http://fineui.com/bbs/forum.ph...Office App Model Samples: Office App Model Samples v2.0: Office App Model Samples v2.0GMare: GMare Beta 1.1: Features Added: Overhauled interface Re-wrote most controls and forms Automatic room creation on application open Room properties bar to change various room properties Now able to use a background from a supported Game Maker project file Block instances implemented More instance editing features like multi-Select, cherry pick select, replace, and set position More instance options on the instance list Flexible XML based .gmpx human readable project file format Game...Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelxFunc: xFunc 2.15.3: Added #53R.NET: R.NET 1.5.12: R.NET 1.5.12 is a beta release towards R.NET 1.6. You are encouraged to use 1.5.12 now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.12: The C stack limit was not disabled on Windows. For reasons possibly peculiar to R, this means that non-concurrent access to R from multiple threads was not stable. This is now fixed, with the fix validated with a unit test. Thanks to Odugen, skyguy94, and previously others (evolvedmicrobe, tomasp) fo...CTI Text Encryption: CTI Text Encryption 5.2: Change log: 5.2 - Remove Cut button. - Fixed Reset All button does not reset encrypted text column. - Switch button location between Copy and Paste. - Enable users to use local fonts to display characters of their language correctly. (A font settings file will be saved at the same folder of this program.) 5.1 - Improve encryption process. - Minor UI update. - Version 5.1 is not compatible with older version. 5.0 - Improve encryption algorithm. - Simply inner non-encryption related mec...SEToolbox: SEToolbox 01.029.006 Release 1: Fix to allow keyboard search on load dialog. (type the first few letters of your save) Fixed check for new release. Changed the way ship details are loaded to alleviate load time for worlds with very large ships (100,000+ blocks). Fixed Image importer, was incorrectly listing 'Asteroid' as import option. Minor changes to menus (text and appearance) for clarity and OS consistency. Added in reading of world palette for color dialog editor. WIP on subsystem editor. Can now multiselec...Media Companion: Media Companion MC3.597b: Thank you for being patient, againThere are a number of fixes in place with this release. and some new features added. Most are self explanatory, so check out the options in Preferences. Couple of new Features:* Movie - Allow save Title and Sort Title in Title Case format. * Movie - Allow save fanart.jpg if movie in folder. * TV - display episode source. Get episode source from episode filename. Fixed:* Movie - Added Fill Tags from plot keywords to Batch Rescraper. * Movie - Fixed TMDB s...SimCityPak: SimCityPak 0.3.0.0: Contains several bugfixes, newly identified properties and some UI improvements. Main new features UI overhaul for the main index list: Icons for each different index, including icons for different property files Tooltips for all relevant fields Removed clutter Identified hundreds of additional properties (thanks to MaxisGuillaume) - this should make modding gameplay easierMagick.NET: Magick.NET 6.8.9.002: Magick.NET linked with ImageMagick 6.8.9.0.VidCoder: 1.5.22 Beta: Added ability to burn SRT subtitles. Updated to HandBrake SVN 6169. Added checks to prevent VidCoder from running with a database version newer than it expects. Tooltips in the Advanced Video panel now trigger on the field labels as well as the fields themselves. Fixed updating preset/profile/tune/level settings on changing video encoder. This should resolve some problems with QSV encoding. Fixed tunes and profiles getting set to blank when switching between x264 and x265. Fixed co...Tiny Deduplicator: Tiny Deduplicator 1.0.0.1: Project Description Tiny Deduplicator is a file deduplicator which can scan for duplicate files, and allows the user to control which duplicates they are going to keep, and which are going to be recycled. Tiny Deduplicator will never delete files directly-- rather, it sends them to the recycle bin for you to confirm the deletion of. In its current form, Tiny Deduplicator is a mere 23KB (including the GUI); however, it has the following features: Easily browse and select which directory to ...NuGet: NuGet 2.8.2: We will be releasing a 2.8.2 version of our own NuGet packages and the NuGet.exe command-line tool. The 2.8.2 release will not include updated VS or WebMatrix extensions. NuGet.Server.Extensions.dll needs to be used alongside NuGet-Signed.exe to provide the NuGet.exe mirror functionality.New Projects2112110004: bùi th? bé di?m2112110007: l?p trình hu?ng d?i tu?ng (OOP) Ph?m H?u Dung2112110019: Nguy?n Duy Hòa_2112110019 CCQ1211A2112110032: Truong Ha Mi2112110041: nguyen manh thuong quan2112110079: VU TH? MAI ANH - L?P TRÌNH HU?NG Ð?I TU?NG(OOP) - L?P CCQ1211B - MSSV 2112110079Adapter Pattern: Super duper simple project that explains how the Adapter Design Pattern works.Aspose for Sitefinity: Aspose Sitefinity Content Export Add-on allow users to export online content into Microsoft Word or Adobe Acrobat PDF document using Aspose.Words.baitapHDT: le ba thuan thanhCaltech Software: Caltech SoftwareDCM Ventas: DCMEntityBinder: Entity Binder is a C# library to help you to read data from xml or json file and bind them directly to data object.FATCAClient: A simple application for populating and viewing XML files which comply with the published FATCA schema.Grade Calculator For BTEC First Diploma in IT level 2: Grade Calculator For BTEC First Diploma in IT level 2HMS_TEST: ????? ???? ??????.lock Keywords Demo: ?? lock ????????,????? this、string、typeof(MyType) ?????mbtPdfAsm: command line pdf file assembler/merger.Orchard CMS Syndication: Implementation of a module that provides OData protocol and then enables third parties to query (custom) creatable content types embedded in an Orchard CMS SitePerfAnalyzer: TemporaryPluralSight Downloader: This project allow to Download PluralSight (PluralSight downloader) video tutorials even with free account and many more features. Use at your own risk.ProView: Image viewer and data entry application for renaming image files.Real Estate website Clark: Real Estate website ClarkSE Community Modding API: This project aims to simplify the modding process of Space Engineers® game from Keen Software HouseSirGorn robi PeHaPa: Projekt na prace zespolowa.TPC1 Grupo14: TPC1Grupo14TypeScriptSheet (Spreadsheet webapp create using TypeScript): TypeScriptSheet. This project is Spread sheet Web Application. It is medium featured spread sheet built using TypeScript and JQuery.VB Converter: Convert your VB6 code to .NET (C# and VB .NET) with this tool.Web Site For Instagram: This is a web app for Instagram using asp.net MVC.WorkProject: This is WorkProject.Z Entity Framework Extensions: ab??????-??????【??】??????????: ??????,?????????,?????????????。?????????????,?????????,???????。 ??????-??????【??】??????????: ??????????????????????????,???????????????,????????????????! ??????-??????【??】??????????: ??????????????????,???????、????、????、??????、???????,??????,???????????。 ????-????【??】????????: ??????????????,???????、???????????,????????,????,?????????,??????,??????! ????-????【??】????????: ???????????????"????,????"???,????????????????????????,??????????????。 ??????-??????【??】??????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ???????????? ???? ???? ???? ???? ???? ??????? ?????,????????????????. ????-????【??】????????: ??????????????、????、????、??????、????、????????,????????、?????????,?????。 ?????-?????【??】?????????: ??????????????????????????,???????????????????????,???????。 ?????-?????【??】?????????: ??????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ?????????????????,???????????????。?????????????,???????,?????????。 ??????-??????【??】??????????: ????????????????????,?????????????,???????????.????????????,????????????! ????-????【??】????????: ????????????:????,????,????,???????,????????,??????:????????,?????! ?????-?????【??】?????????: ?????????????????,??:??????,????,????,????,?????,??????????????. ?????-?????【??】?????????: ??????,??,????????。 ... ??????????????????、??????????????????... ??????-??????【??】??????????: ?????????????????,??????????????、???????、???????、???????、?????! ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ??????????????????????????,???????????,????????,?????????????????????。 ????-????【??】????????: ??????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ??????????????、?????????,?????????,????,????????,????????????????! ????-????【??】????????: ??????????????????????,?????????,??????????,????????,?????! ??????-??????【??】??????????: ???????????????、????、????、??????、????、???????,?????,?????????! ??????-??????【??】??????????: ????????????????????????、??????,????、?????、????, ?????????,?????????????! ????-????【??】????????: ????????????????、????、??????、????????,????????????,???????????! ?????-?????【??】?????????: ????????????????????、????、????、??????、???????,??????、??????。 ?????-?????【??】?????????: ???????,??????,?????????????????????,???????????????????????。 ??????-??????【??】??????????: ????????????????????,?????????????????????,?????,????,???????. ??????-??????【??】??????????: ??????????????、??????、????、?????、?????!????,????????????????!????。 ????-????【??】????????: ??????????????????,?????,???????,???????????,??????! ?????-?????【??】?????????: ???????????、??、???????????,??????,????????,??????????????????...????。 ?????-?????【??】?????????: ??????????????、???????,?????????,???????????????,?????????????。

    Read the article

  • Windows Azure: Major Updates for Mobile Backend Development

    - by ScottGu
    This week we released some great updates to Windows Azure that make it significantly easier to develop mobile applications that use the cloud. These new capabilities include: Mobile Services: Custom API support Mobile Services: Git Source Control support Mobile Services: Node.js NPM Module support Mobile Services: A .NET API via NuGet Mobile Services and Web Sites: Free 20MB SQL Database Option for Mobile Services and Web Sites Mobile Notification Hubs: Android Broadcast Push Notification Support All of these improvements are now available to use immediately (note: some are still in preview).  Below are more details about them. Mobile Services: Custom APIs, Git Source Control, and NuGet Windows Azure Mobile Services provides the ability to easily stand up a mobile backend that can be used to support your Windows 8, Windows Phone, iOS, Android and HTML5 client applications.  Starting with the first preview we supported the ability to easily extend your data backend logic with server side scripting that executes as part of client-side CRUD operations against your cloud back data tables. With today’s update we are extending this support even further and introducing the ability for you to also create and expose Custom APIs from your Mobile Service backend, and easily publish them to your Mobile clients without having to associate them with a data table. This capability enables a whole set of new scenarios – including the ability to work with data sources other than SQL Databases (for example: Table Services or MongoDB), broker calls to 3rd party APIs, integrate with Windows Azure Queues or Service Bus, work with custom non-JSON payloads (e.g. Windows Periodic Notifications), route client requests to services back on-premises (e.g. with the new Windows Azure BizTalk Services), or simply implement functionality that doesn’t correspond to a database operation.  The custom APIs can be written in server-side JavaScript (using Node.js) and can use Node’s NPM packages.  We will also be adding support for custom APIs written using .NET in the future as well. Creating a Custom API Adding a custom API to an existing Mobile Service is super easy.  Using the Windows Azure Management Portal you can now simply click the new “API” tab with your Mobile Service, and then click the “Create a Custom API” button to create a new Custom API within it: Give the API whatever name you want to expose, and then choose the security permissions you’d like to apply to the HTTP methods you expose within it.  You can easily lock down the HTTP verbs to your Custom API to be available to anyone, only those who have a valid application key, only authenticated users, or administrators.  Mobile Services will then enforce these permissions without you having to write any code: When you click the ok button you’ll see the new API show up in the API list.  Selecting it will enable you to edit the default script that contains some placeholder functionality: Today’s release enables Custom APIs to be written using Node.js (we will support writing Custom APIs in .NET as well in a future release), and the Custom API programming model follows the Node.js convention for modules, which is to export functions to handle HTTP requests. The default script above exposes functionality for an HTTP POST request. To support a GET, simply change the export statement accordingly.  Below is an example of some code for reading and returning data from Windows Azure Table Storage using the Azure Node API: After saving the changes, you can now call this API from any Mobile Service client application (including Windows 8, Windows Phone, iOS, Android or HTML5 with CORS). Below is the code for how you could invoke the API asynchronously from a Windows Store application using .NET and the new InvokeApiAsync method, and data-bind the results to control within your XAML:     private async void RefreshTodoItems() {         var results = await App.MobileService.InvokeApiAsync<List<TodoItem>>("todos", HttpMethod.Get, parameters: null);         ListItems.ItemsSource = new ObservableCollection<TodoItem>(results);     }    Integrating authentication and authorization with Custom APIs is really easy with Mobile Services. Just like with data requests, custom API requests enjoy the same built-in authentication and authorization support of Mobile Services (including integration with Microsoft ID, Google, Facebook and Twitter authentication providers), and it also enables you to easily integrate your Custom API code with other Mobile Service capabilities like push notifications, logging, SQL, etc. Check out our new tutorials to learn more about to use new Custom API support, and starting adding them to your app today. Mobile Services: Git Source Control Support Today’s Mobile Services update also enables source control integration with Git.  The new source control support provides a Git repository as part your Mobile Service, and it includes all of your existing Mobile Service scripts and permissions. You can clone that git repository on your local machine, make changes to any of your scripts, and then easily deploy the mobile service to production using Git. This enables a really great developer workflow that works on any developer machine (Windows, Mac and Linux). To use the new support, navigate to the dashboard for your mobile service and select the Set up source control link: If this is your first time enabling Git within Windows Azure, you will be prompted to enter the credentials you want to use to access the repository: Once you configure this, you can switch to the configure tab of your Mobile Service and you will see a Git URL you can use to use your repository: You can use this URL to clone the repository locally from your favorite command line: > git clone https://scottgutodo.scm.azure-mobile.net/ScottGuToDo.git Below is the directory structure of the repository: As you can see, the repository contains a service folder with several subfolders. Custom API scripts and associated permissions appear under the api folder as .js and .json files respectively (the .json files persist a JSON representation of the security settings for your endpoints). Similarly, table scripts and table permissions appear as .js and .json files, but since table scripts are separate per CRUD operation, they follow the naming convention of <tablename>.<operationname>.js. Finally, scheduled job scripts appear in the scheduler folder, and the shared folder is provided as a convenient location for you to store code shared by multiple scripts and a few miscellaneous things such as the APNS feedback script. Lets modify the table script todos.js file so that we have slightly better error handling when an exception occurs when we query our Table service: todos.js tableService.queryEntities(query, function(error, todoItems){     if (error) {         console.error("Error querying table: " + error);         response.send(500);     } else {         response.send(200, todoItems);     }        }); Save these changes, and now back in the command line prompt commit the changes and push them to the Mobile Services: > git add . > git commit –m "better error handling in todos.js" > git push Once deployment of the changes is complete, they will take effect immediately, and you will also see the changes be reflected in the portal: With the new Source Control feature, we’re making it really easy for you to edit your mobile service locally and push changes in an atomic fashion without sacrificing ease of use in the Windows Azure Portal. Mobile Services: NPM Module Support The new Mobile Services source control support also allows you to add any Node.js module you need in the scripts beyond the fixed set provided by Mobile Services. For example, you can easily switch to use Mongo instead of Windows Azure table in our example above. Set up Mongo DB by either purchasing a MongoLab subscription (which provides MongoDB as a Service) via the Windows Azure Store or set it up yourself on a Virtual Machine (either Windows or Linux). Then go the service folder of your local git repository and run the following command: > npm install mongoose This will add the Mongoose module to your Mobile Service scripts.  After that you can use and reference the Mongoose module in your custom API scripts to access your Mongo database: var mongoose = require('mongoose'); var schema = mongoose.Schema({ text: String, completed: Boolean });   exports.get = function (request, response) {     mongoose.connect('<your Mongo connection string> ');     TodoItemModel = mongoose.model('todoitem', schema);     TodoItemModel.find(function (err, items) {         if (err) {             console.log('error:' + err);             return response.send(500);         }         response.send(200, items);     }); }; Don’t forget to push your changes to your mobile service once you are done > git add . > git commit –m "Switched to use Mongo Labs" > git push Now our Mobile Service app is using Mongo DB! Note, with today’s update usage of custom Node.js modules is limited to Custom API scripts only. We will enable it in all scripts (including data and custom CRON tasks) shortly. New Mobile Services NuGet package, including .NET 4.5 support A few months ago we announced a new pre-release version of the Mobile Services client SDK based on portable class libraries (PCL). Today, we are excited to announce that this new library is now a stable .NET client SDK for mobile services and is no longer a pre-release package. Today’s update includes full support for Windows Store, Windows Phone 7.x, and .NET 4.5, which allows developers to use Mobile Services from ASP.NET or WPF applications. You can install and use this package today via NuGet. Mobile Services and Web Sites: Free 20MB Database for Mobile Services and Web Sites Starting today, every customer of Windows Azure gets one Free 20MB database to use for 12 months free (for both dev/test and production) with Web Sites and Mobile Services. When creating a Mobile Service or a Web Site, simply chose the new “Create a new Free 20MB database” option to take advantage of it: You can use this free SQL Database together with the 10 free Web Sites and 10 free Mobile Services you get with your Windows Azure subscription, or from any other Windows Azure VM or Cloud Service. Notification Hubs: Android Broadcast Push Notification Support Earlier this year, we introduced a new capability in Windows Azure for sending broadcast push notifications at high scale: Notification Hubs. In the initial preview of Notification Hubs you could use this support with both iOS and Windows devices.  Today we’re excited to announce new Notification Hubs support for sending push notifications to Android devices as well. Push notifications are a vital component of mobile applications.  They are critical not only in consumer apps, where they are used to increase app engagement and usage, but also in enterprise apps where up-to-date information increases employee responsiveness to business events.  You can use Notification Hubs to send push notifications to devices from any type of app (a Mobile Service, Web Site, Cloud Service or Virtual Machine). Notification Hubs provide you with the following capabilities: Cross-platform Push Notifications Support. Notification Hubs provide a common API to send push notifications to iOS, Android, or Windows Store at once.  Your app can send notifications in platform specific formats or in a platform-independent way.  Efficient Multicast. Notification Hubs are optimized to enable push notification broadcast to thousands or millions of devices with low latency.  Your server back-end can fire one message into a Notification Hub, and millions of push notifications can automatically be delivered to your users.  Devices and apps can specify a number of per-user tags when registering with a Notification Hub. These tags do not need to be pre-provisioned or disposed, and provide a very easy way to send filtered notifications to an infinite number of users/devices with a single API call.   Extreme Scale. Notification Hubs enable you to reach millions of devices without you having to re-architect or shard your application.  The pub/sub routing mechanism allows you to broadcast notifications in a super-efficient way.  This makes it incredibly easy to route and deliver notification messages to millions of users without having to build your own routing infrastructure. Usable from any Backend App. Notification Hubs can be easily integrated into any back-end server app, whether it is a Mobile Service, a Web Site, a Cloud Service or an IAAS VM. It is easy to configure Notification Hubs to send push notifications to Android. Create a new Notification Hub within the Windows Azure Management Portal (New->App Services->Service Bus->Notification Hub): Then register for Google Cloud Messaging using https://code.google.com/apis/console and obtain your API key, then simply paste that key on the Configure tab of your Notification Hub management page under the Google Cloud Messaging Settings: Then just add code to the OnCreate method of your Android app’s MainActivity class to register the device with Notification Hubs: gcm = GoogleCloudMessaging.getInstance(this); String connectionString = "<your listen access connection string>"; hub = new NotificationHub("<your notification hub name>", connectionString, this); String regid = gcm.register(SENDER_ID); hub.register(regid, "myTag"); Now you can broadcast notification from your .NET backend (or Node, Java, or PHP) to any Windows Store, Android, or iOS device registered for “myTag” tag via a single API call (you can literally broadcast messages to millions of clients you have registered with just one API call): var hubClient = NotificationHubClient.CreateClientFromConnectionString(                   “<your connection string with full access>”,                   "<your notification hub name>"); hubClient.SendGcmNativeNotification("{ 'data' : {'msg' : 'Hello from Windows Azure!' } }", "myTag”); Notification Hubs provide an extremely scalable, cross-platform, push notification infrastructure that enables you to efficiently route push notification messages to millions of mobile users and devices.  It will make enabling your push notification logic significantly simpler and more scalable, and allow you to build even better apps with it. Learn more about Notification Hubs here on MSDN . Summary The above features are now live and available to start using immediately (note: some of the services are still in preview).  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • How to safely reboot via First Boot script

    - by unixman
    With the cost and performance benefits of the SPARC T4 and SPARC T5 systems undeniably validated, the banking sector is actively moving to Solaris 11.  I was recently asked to help a banking customer of ours look at migrating some of their Solaris 10 logic over to Solaris 11.  While we've introduced a number of holistic improvements in Solaris 11, in terms of how we ease long-term software lifecycle management, it is important to appreciate that customers may not be able to move all of their Solaris 10 scripts and procedures at once; there are years of scripts that reflect fine-tuned requirements of proprietary banking software that gets layered on top of the operating system. One of these requirements is to go through a cycle of reboots, after the system is installed, in order to ensure appropriate software dependencies and various configuration files are in-place. While Solaris 10 introduced a facility that aids here, namely SMF, many of our customers simply haven't yet taken the time to take advantage of this - proceeding with logic that, while functional, without further analysis has an appearance of not being optimal in terms of taking advantage of all the niceties bundled in Solaris 11 at no extra cost. When looking at Solaris 11, we recognize that one of the vehicles that bridges the gap between getting the operating system image payload delivered, and the customized banking software installed, is a notion of a First Boot script.  I had a working example of this at one of the Oracle OpenWorld sessions a few years ago - we've since improved our documentation and have introduced sections where this is described in better detail.   If you're looking at this for the first time and you've not worked with IPS and SMF previously, you might get the sense that the tasks are daunting.   There is a set of technologies involved that are jointly engineered in order to make the process reliable, predictable and extensible. As you go down the path of writing your first boot script, you'll be faced with a need to wrap it into a SMF service and then packaged into a IPS package. The IPS package would then need to be placed onto your IPS repository, in order to subsequently be made available to all of your AI (Automated Install) clients (i.e. the systems that you're installing Solaris and your software onto).     With this blog post, I wanted to create a single place that outlines the entire process (simplistically), and provide a hint of how a good old "at" command may make the requirement of forcing an initial reboot handy. The syntax and references to commands here is based on running this on a version of Solaris 11 that has been updated since its initial release in 2011 (i.e. I am writing this on Solaris 11.1) Assuming you've built an AI server (see this How To article for an example), you might be asking yourself: "Ok, I've got some logic that I need executed AFTER Solaris is deployed and I need my own little script that would make that happen. How do I go about hooking that script into the Solaris 11 AI framework?"  You might start here, in Chapter 13 of the "Installing Oracle Solaris 11.1 Systems" guide, which talks about "Running a Custom Script During First Boot".  And as you do, you'll be confronted with command that might be unfamiliar to you if you're new to Solaris 11, like our dear new friend: svcbundle svcbundle is an aide to creating manifests and profiles.  It is awesome, but don't let its awesomeness overwhelm you. (See this How To article by my colleague Glynn Foster for a nice working example).  In order to get your script's logic integrated into the Solaris 11 deployment process, you need to wrap your (shell) script into 2 manifests -  a SMF service manifest and a IPS package manifest.  ....and if you're new to XML, well then -- buckle up We have some examples of small first boot scripts shown here, as templates to build upon. Necessary structure of the script, particularly in leveraging SMF interfaces, is key. I won't go into that here as that is covered nicely in the doc link above.    Let's say your script ends up looking like this (btw: if things appear to be cut-off in your browser, just select them, copy and paste into your editor and it'll be grabbed - the source gets captured eventhough the browser may not render it "correctly" - ah, computers). #!/bin/sh # Load SMF shell support definitions . /lib/svc/share/smf_include.sh # If nothing to do, exit with temporary disable completed=`svcprop -p config/completed site/first-boot-script-svc:default` [ "${completed}" = "true" ] && \ smf_method_exit $SMF_EXIT_TEMP_DISABLE completed "Configuration completed" # Obtain the active BE name from beadm: The active BE on reboot has an R in # the third column of 'beadm list' output. Its name is in column one. bename=`beadm list -Hd|nawk -F ';' '$3 ~ /R/ {print $1}'` beadm create ${bename}.orig echo "Original boot environment saved as ${bename}.orig" # ---- Place your one-time configuration tasks here ---- # For example, if you have to pull some files from your own pre-existing system: /usr/bin/wget -P /var/tmp/ $PULL_DOWN_ADDITIONAL_SCRIPTS_FROM_A_CORPORATE_SYSTEM /usr/bin/chmod 755 /var/tmp/$SCRIPTS_THAT_GOT_PULLED_DOWN_IN_STEP_ABOVE # Clearly the above 2 lines represent some logic that you'd have to customize to fit your needs. # # Perhaps additional things you may want to do here might be of use, like # (gasp!) configuring ssh server for root login and X11 forwarding (for testing), and the like... # # Oh and by the way, after we're done executing all of our proprietary scripts we need to reboot # the system in accordance with our operational software requirements to ensure all layered bits # get initialized properly and pull-in their own modules and components in the right sequence, # subsequently. # We need to set a "time bomb" reboot, that would take place upon completion of this script. # We already know that *this* script depends on multi-user-server SMF milestone, so it should be # safe for us to schedule a reboot for 5 minutes from now. The "at" job get scheduled in the queue # while our little script continues thru the rest of the logic. /usr/bin/at now + 5 minutes <<REBOOT /usr/bin/sync /usr/sbin/reboot REBOOT # ---- End of your customizations ---- # Record that this script's work is done svccfg -s site/first-boot-script-svc:default setprop config/completed = true svcadm refresh site/first-boot-script-svc:default smf_method_exit $SMF_EXIT_TEMP_DISABLE method_completed "Configuration completed"  ...and you're happy with it and are ready to move on. Where do you go and what do you do? The next step is creating the IPS package for your script. Since running the logic of your script constitutes a service, you need to create a service manifest. This is described here, in the middle of Chapter 13 of "Creating an IPS package for the script and service".  Assuming the name of your shell script is first-boot-script.sh, you could end up doing the following: $ cd some_working_directory_for_this_project$ mkdir -p proto/lib/svc/manifest/site$ mkdir -p proto/opt/site $ cp first-boot-script.sh proto/opt/site  Then you would create the service manifest  file like so: $ svcbundle -s service-name=site/first-boot-script-svc \ -s start-method=/opt/site/first-boot-script.sh \ -s instance-property=config:completed:boolean:false -o \ first-boot-script-svc-manifest.xml   ...as described here, and place it into the directory hierarchy above. But before you place it into the directory, make sure to inspect the manifest and adjust the appropriate service dependencies.  That is to say, you want to properly specify what milestone should be reached before your service runs.  There's a <dependency> section that looks like this, before you modify it: <dependency restart_on="none" type="service" name="multi_user_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user"/>  </dependency>  So if you'd like to have your service run AFTER the multi-user-server milestone has been reached (i.e. later, as multi-user-server has more dependencies then multi-user and our intent to reboot the system may have significant ramifications if done prematurely), you would modify that section to read:  <dependency restart_on="none" type="service" name="multi_user_server_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user-server"/>  </dependency> Save the file and validate it: $ svccfg validate first-boot-script-svc-manifest.xml Assuming there are no errors returned, copy the file over into the directory hierarchy: $ cp first-boot-script-svc-manifest.xml proto/lib/svc/manifest/site Now that we've created the service manifest (.xml), create the package manifest (.p5m) file named: first-boot-script.p5m.  Populate it as follows: set name=pkg.fmri value=first-boot-script-AT-1-DOT-0,5.11-0 set name=pkg.summary value="AI first-boot script" set name=pkg.description value="Script that runs at first boot after AI installation" set name=info.classification value=\ "org.opensolaris.category.2008:System/Administration and Configuration" file lib/svc/manifest/site/first-boot-script-svc-manifest.xml \ path=lib/svc/manifest/site/first-boot-script-svc-manifest.xml owner=root \ group=sys mode=0444 dir path=opt/site owner=root group=sys mode=0755 file opt/site/first-boot-script.sh path=opt/site/first-boot-script.sh \ owner=root group=sys mode=0555 Now we are going to publish this package into a IPS repository. If you don't have one yet, don't worry. You have 2 choices: You can either  publish this package into your mirror of the Oracle Solaris IPS repo or create your own customized repo.  The best practice is to create your own customized repo, leaving your mirror of the Oracle Solaris IPS repo untouched.  From this point, you have 2 choices as well - you can either create a repo that will be accessible by your clients via HTTP or via NFS.  Since HTTP is how the default Solaris repo is accessed, we'll go with HTTP for your own IPS repo.   This nice and comprehensive How To by Albert White describes how to create multiple internal IPS repos for Solaris 11. We'll zero in on the basic elements for our needs here: We'll create the IPS repo directory structure hanging off a separate ZFS file system, and we'll tie it into an instance of pkg.depotd. We do this because we want our IPS repo to be accessible to our AI clients through HTTP, and the pkg.depotd SMF service bundled in Solaris 11 can help us do this. We proceed as follows: # zfs create rpool/export/MyIPSrepo # pkgrepo create /export/MyIPSrepo # svccfg -s pkg/server add MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg pkg application # svccfg -s pkg/server:MyIPSrepo setprop pkg/port=10081 # svccfg -s pkg/server:MyIPSrepo setprop pkg/inst_root=/export/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg general framework # svccfg -s pkg/server:MyIPSrepo addpropvalue general/complete astring: MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpropvalue general/enabled boolean: true # svccfg -s pkg/server:MyIPSrepo setprop pkg/readonly=true # svccfg -s pkg/server:MyIPSrepo setprop pkg/proxy_base = astring: http://your_internal_websrvr/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo setprop pkg/threads = 200 # svcadm refresh application/pkg/server:MyIPSrepo # svcadm enable application/pkg/server:MyIPSrepo Now that the IPS repo is created, we need to publish our package into it: # pkgsend publish -d ./proto -s /export/MyIPSrepo first-boot-script.p5m If you find yourself making changes to your script, remember to up-rev the version in the .p5m file (which is your IPS package manifest), and re-publish the IPS package. Next, you need to go to your AI install server (which might be the same machine) and modify the AI manifest to include a reference to your newly created package.  We do that by listing an additional publisher, which would look like this (replacing the IP address and port with your own, from the "svccfg" commands up above): <publisher name="firstboot"> <origin name="http://192.168.1.222:10081"/> </publisher>  Further down, in the  <software_data action="install">  section add: <name>pkg:/first-boot-script</name> Make sure to update your Automated Install service with the new AI manifest via installadm update-manifest command.  Don't forget to boot your client from the network to watch the entire process unfold and your script get tested.  Once the system makes the initial reboot, the first boot script will be executed and whatever logic you've specified in it should be executed, too, followed by a nice reboot. When the system comes up, your service should stay in a disabled state, as specified by the tailing lines of your SMF script - this is normal and should be left as is as it helps provide an auditing trail for you.   Because the reboot is quite a significant action for the system, you may want to add additional logic to the script that actually places and then checks for presence of certain lock files in order to avoid doing a reboot unnecessarily. You may also want to, alternatively, remove the SMF service entirely - if you're unsure of the potential for someone to try and accidentally enable that service -- eventhough its role in life is to only run once upon the system's first boot. That is how I spent a good chunk of my pre-Halloween time this week, hope yours was just as SPARCkly^H^H^H^H fun!    

    Read the article

  • CodePlex Daily Summary for Friday, June 01, 2012

    CodePlex Daily Summary for Friday, June 01, 2012Popular ReleasesASP.Net Client Dependency Framework: v1.5: This release brings you many bug fixes and some new features Install via Nuget:Install-Package ClientDependency Install-Package ClientDependency-Mvc New featuresNew PlaceHolderProvider for webforms which will now let you specify exactly where the CSS and JS is rendered, so you can now separate them Better API support for runtime changes & registration Allows for custom formatting of composite file URLs new config option: pathUrlFormat="{dependencyId}/{version}/{type}" to have full contr...Silverlight 5 Multi-Window Controls: May 2012: This release introduces a new context menu type for desktop apps that can overflow the parent window: http://trelford.com/ContextMenu_SL5_Native.png Code snippet: <TextBlock Text="Right click on me to show the context menu"> <multiwindow:ContextMenuService.ContextMenu> <multiwindow:ContextMenuWindow> <multiwindow:MenuItem Header="Menu Item"/> </multiwindow:ContextMenuWindow> </multiwindow:ContextMenuService.Co...Better Explorer: Better Explorer Beta 1: Finally, the first Beta is here! There were a lot of changes, including: Translations into 10 different languages (the translations are not complete and will be updated soon) Conditional Select new tools for managing archives Folder Tools tab new search bar and Search Tab new image editing tools update function many bug fixes, stability fixes, and memory leak fixes other new features as well! Please check it out and if there are any problems, let us know. :) Also, do not forge...myManga: myManga v1.0.0.3: Will include MangaPanda as a default option. ChangeLog Updating from Previous Version: Extract contents of Release - myManga v1.0.0.3.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (Preview 3): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8 Microsoft PlayReady Client SDK for Metro Style Apps Release notes:Support for Windows 8 Release Preview (released 5/31/12) Advertising support (VAST, MAST, VPAID, & clips) Miscellaneous improvements and bug fixesConfuser: Confuser 1.8: Changelog: +New UI...again. +New project system, replacing the previous declarative obfuscation and XML configuration. *Improve the protection strength... *Improve the compatibility. Now Confuser can obfuscate itself and even some real-life application like Paint.NET and ILSpy! (of course with some small adjustment)Naked Objects: Naked Objects Release 4.1.0: Corresponds to the packaged version 4.1.0 available via NuGet. Note that the versioning has moved to SemVer (http://semver.org/) This is a bug fix release with no new functionality. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.54: Fix for issue #18161: pretty-printing CSS @media rule throws an exception due to mismatched Indent/Unindent pair.Silverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.Json.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ?????????API?? ???????OAuth2.0?? ????:????????????,??????????“SOURCE CODE”?????????Changeset,http://weibosdk.codeplex.com/SourceControl/list/changesets ???:????????,DEMO??AppKey????????????????,?????AppKey,????AppKey???????????,?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitNew ProjectsAntiXSS Experimental: Welcome to AntiXSS Experimental. AntiXSS Experimental contains code for common encoders auto-generated using Microsoft Research's BEK project.atfone: atfoneBango Adobe Air Application Analytics SDK: Bango application analytics is an analytics solution for mobile applications. This SDK provides a framework you can use in your application to add analytics capabilities to your mobile applications. It's developed in Actionscript with Native Extensions to target iOS,Android and the Blackberry Playbook.bbinjest: bbinjestdevMobile.NET Library for Windows Phone 7.1: devMobile.NET Library intends to offer a set of commons and not so commons controls for developing Windows Phone 7.5 applications. It offers classic controls like both pie and column charts for simple scenarios as well as other not so classic controls like SignalAccuracy control for displaying, for instance, the GPS accuracy like WP7 built-in GPRS/3G signal coverage indicator does. It also provide a tag cloud control for displaying item in the way common web based tag clouds usually offer. ...dnnFiddle: dnnFiddle is a DotNetNuke module that aims to make it easier to add rich content to your DotNetNuke website.DotNetNuke Task Manager: Test Project to learn DotNetNuke and CodePlex IntegrationDSIB - TireService: Project for handling Tiresets/Wheels - looking up dimensions, loadindex, speedindex, etc. for wheelsflyabroad: flyabroadhphai: My ProjectIIS File Manager - Editor: IIS File Manager provides ability to upload files faster through HTTP and it requires no extra installation, just one website with windows authentication lets users upload files easily.KeypItSafe Password Vault: KeypItSafe Password Vault Easily and safely store your website passwords on your computer - or go mobile in just a few clicks! What is KeypItSafe? KeypItSafe is a free open source password manager that helps you store and manage all of your passwords securely on your computer or a USB/Removable Media drive. With only a few clicks you can transfer all of your saved passwords to a USB drive and immediately have access to them on virtually any computer. You only have to remember one mas...litwaredk: Sourcecode for the projects on www.litware.dkMVC Pattern Toolkit (Sample): This is a sample MVC pattern toolkit that helps web developers create ASP.NET MVC 2 web applications using advanced tooling and automation, with integrated guidance. This toolkit is provided as a *sample* soley to demonstrate how easy pattern toolkits can be created that provide custom automation and tooling in Visual Studio to speed development. *NOTE*: This pattern toolkit is not intended to demonstrate THE official way to build ASP.NET MVC applications. It is intended to demonstrate ...MyDeveloperCareer: willwymydevelopercarMyPomodoroWatch: My personal Pomodoro watch.NRails: NRailsPayment Gateways: Open source project for integrating payment gateways all over the world into .NET websites and desktop applications. Developers are requested to submit their code and check out the project to start contributing.Preactor Object Model: pom is a Preactor library which provides easy access and manipulation of Preactor data.RgC: RuCSecondPong: blablablaSharp Home: Sharphome is designed to run on Windows and Linux (via the Mono Project) and is designed to be useful in home automation and home security.SharpPTC: SharpPTC is a framebuffer library designed for creating retro games and applications, built on DirectDraw targeting the .NET platform. It provides a simple pixel buffer and methods to ease drawing (line, rectangle, clear etc). SharpPTC also comes with limited keyboard support.simplesocxs: simplesocxsSQL Process Viewer: View all of the processes (that you have security to see) currently running on a SQL database.testtom05312012git02: fdsfdText-To-Speech with Microsoft Translator Service: With this library, you can easily add Text-To-Speech capabilities to your .NET applications. It uses the Microsoft Translator Service to obtain streams of file speaking text in the desired language. At the moment of writing, there are 44 supported languages, including English, Italian, German, French, Spanish, Japanese and Chinese.ultsvn: The description.umbracoCssZenGarden: This is a learning package, It's not supposed to be a best practice for content management, just a fun test to see what a content managed cssZenGarden might be like.Visual Studio Solution Code Format AddIn: 0 people following this project (follow) VS???????? ????????:http://www.cnblogs.com/viter/addin ??Visual Studio 2008?2010,???????????,???????????"version“????。 ????namespace , class , struct , enum , property ,?????????(??????Function)??????Function,????????。 ???????、????。 ????Function????????????xml???,???????BUG,????Function???。 ??? class , struct , enum , property , Function??#region #endregion?????。 ????Property ? Function ???????,?Property????“?????? ”??。 ?????...Viz, Simple 3D Control inspired by Processing.orgVolunteerManager: Its a small app that manages volunteers in a volunteer organization.WebLearningFS: Dokan Based Web Learning File SystemWindowsPhonePusherSLService: Silverlight Pusher for WPhoneWindowsPhonePusherWcfService: for pushing same to wphone tooWPF Encryption: This develop a application for encryption/encode a string or checksum a fileXNAGameFeatures: XNAGameFeatures Project XNAGameFeatures is a XNA 4.0 library which permit to create and manage a XNA game easily. The project is separate in five part : BasicGame library Widget library Shapes library Input library Features library Each part is thinking to offer a easy way to the creation of a game in XNA 4.0

    Read the article

  • CodePlex Daily Summary for Thursday, March 10, 2011

    CodePlex Daily Summary for Thursday, March 10, 2011Popular ReleasesTweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comSharePoint Field Groups To Users: GroupsToUsers Release 1.0: SharePoint "Groups to Users" is a custom field that displays two separate drop-down lists. The first drop-down populates with all SharePoint Groups from the current web. By selecting a particular group the second drop-down list gets populated with all Users within the selected SharePoint group.DirectQ: Release 1.8.7 (RC2): More fixes and improvements. Note for multiplayer - you may need to set r_waterwarp to 0 or 2 before connecting to a server, otherwise you will get a "Mod_PointInLeaf: bad model" error and not be able to connect. You can set it back to 1 after you connect, of course. This only came to light after releasing, and will be fixed in the next one.Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-03-09: Code samples for Visual Studio 2008Office Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...Facebook Graph Toolkit: Facebook Graph Toolkit 1.1: Version 1.1 (8 Mar 2011)new Dialog class for redirecting users to Facebook dialogs new Async publishing methods new Check for Extended Permissions option fixed bug: inappropiate condition of redirecting to login in Api class fixed bug: IframeRedirect method not workingpatterns & practices : Composite Services: Composite Services Guidance - CTP2: This is the second CTP of the p&p Composite Service Guidance.Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...DotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added fullscreen for the popup and popupformIronPython: 2.7 Release Candidate 2: On behalf of the IronPython team, I am pleased to announce IronPython 2.7 Release Candidate 2. The releases contains a few minor bug fixes, including a working webbrowser module. Please see the release notes for 61395 for what was fixed in previous releases.LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.Minemapper: Minemapper v0.1.6: Once again supports biomes, thanks to an updated Minecraft Biome Extractor, which added support for the new Minecraft beta v1.3 map format. Updated mcmap to support new biome format.Sandcastle Help File Builder: SHFB v1.9.3.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. This release uses the Sandcastle Guided Installation package used by Sandcastle Styles. Download and extract to a folder and then run SandcastleI...AutoLoL: AutoLoL v1.6.4: It is now possible to run the clicker anyway when it can't detect the Masteries Window Fixed a critical bug in the open file dialog Removed the resize button Some UI changes 3D camera movement is now more intuitive (Trackball rotation) When an error occurs on the clicker it will attempt to focus AutoLoLYAF.NET (aka Yet Another Forum.NET): v1.9.5.5 RTW: YAF v1.9.5.5 RTM (Date: 3/4/2011 Rev: 4742) Official Discussion Thread here: http://forum.yetanotherforum.net/yaf_postsm47149_v1-9-5-5-RTW--Date-3-4-2011-Rev-4742.aspx Changes in v1.9.5.5 Rev. #4661 - Added "Copy" function to forum administration -- Now instead of having to manually re-enter all the access masks, etc, you can just duplicate an existing forum and modify after the fact. Rev. #4642 - New Setting to Enable/Disable Last Unread posts links Rev. #4641 - Added Arabic Language t...Snippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...New ProjectsAll2Iso: Convert any disk image format to ISO. Actually it can only convert from BIN. Any help is appreciated.Asset Management by Joko for GENCPROS: This is my initial test project using codeplex storageAxvius: Axvius' core C# API library. Includes, Now, a class for overriding the system clock; especially useful for unit tests.Collision Avoidance Simulator: The vertex buff er, in conjunction with the spatial con guration of human models, a particle system and a reduced set of rules are processed in order to obtain a dynamic knowledge base for collision avoidance calculations. Developed in C++.Configuring role link in Biztalk 2009: Configuring role link in Biztalk 2009CrazySnake: Crazy Snake é o famoso jogo da cobra, esse em sua versão tanto para windows, quanto para windows phone 7dIRca WP7 IRC Client: IRC client with possible SL/WPF ports. Utilizes native tcp sockets until the communication layer from MS solidifies. Basically put, this project would not exist without the work of some wp7 hackers. Pip pip old boys.DoanVienProject: Ðây là porject qu?n lý doàn viênDynamics AX Build Scripts: Sharing build scripts for Dynamics AX integration with source control, focused on Team Foundation Server (TFS)EPiServer CMS ElencySolutions.MultipleProperty: The MultipleProperty classes are for use in EPiServer CMS 6 and provide an easy way for developers to build complex custom properties that comprise of other EPiServer custom properties. Feriados Móveis Brasil: This project aim to calculate the holidays in Brazil who is based on catholic dates. The main holiday is the Easter Sunday and the other holidays are calculated based on that date. Cálculo de feriados móveis para o Brasil baseados nas datas festivas católicas.flyskynet: myselft projectGriffTom: GriffTomImage Resizer (????????): ??????????????????,????????????????。?????jpg??。 ??????,????????????。iPray: Islamic Prayer Software.Japanese Learners & Enthusiasts Kanji Project: Help create games, puzzles, and exercises to assist learners of Japanese to master Kanji comprehension. Games/etc. will be written in C#, jQuery and/or Silverlight for ASP.NET MVC 3 Razor. Initial goal is for a user of the site to master grade level 1 Kanji (first 80 Kanji).MailChimp Amazon Simple Email Service .NET Wrapper: A .NET 4 wrapper for MailChimp's Amazon Simple Email Service. It's developed in C# using Hammock.NGuice: .NET????Guice???????????。???.NET?????????,?Guice?.NET??????????。???????:http://code.google.com/p/google-guice/Rubrica Persone: Libreria che contiene gli oggetti e le form per la gestione di una rubrica di persone, facilmente integrabile in altre applicazioni.SCCM Client Center Integration Pack for Opalis: "SCCM Client Center Integration Pack for Opalis" is an System Center Opalis Integration Pack to manage and orchestrate System Center Configuration Manager (SCCM) 2007 Agents from Opalis workflows.Sugar-free programming: I like to think about breadth or depth developer, or Mort, Elvis, or Einstein developer stereotypes, as roles we could play accordingly to the task at hand…see more: http://blogs.msdn.com/b/marcod/archive/2011/03/01/sugarfreecs1.aspxTest Project 1: This is test project siteTestZoner: TestZoneTextBookReader: ???????????????????????,??????????,??????! ??.net 2.0uSiteBuilder: uSiteBuilder is a framework made for .NET developers to simplify, speedup and take Umbraco development to next level. Aim of this framework is to reduce developer interaction with Umbraco back-end (browser based development), to create Umbraco websites in a more .NET way...VinculacionMicrosoft: Vinculacion Microsoft is a project for distributing Dreamsparks and Faculty Connection codes to students and professors. It is developed in ASP .Net and designed for Universities in Mexico interested in the different benefits that Microsoft has for them. Vio: Vio is an application for Sharetronix Based websites. Allowing users to connect to their community via their Windows Desktop.whatsnew.exe a command line utility to find new files: whatsnew.exe is a command line utility that lists the files created (new files) in a given number of days. whatsnew.exe 's syntax is very simple: whatsnew path numberofdays Also whatsnew supports other options like HTML or XML output, hyperlinked outputs and more.

    Read the article

  • CodePlex Daily Summary for Thursday, May 15, 2014

    CodePlex Daily Summary for Thursday, May 15, 2014Popular ReleasesVisualizers: Visualizer: This dll is the core of the project just copy and paste it in the following folder %Microsoft Visual Studio%\Common7\Packages\Debugger\Visualizers where %Microsoft Visual Studio% is the Visual studio installation folderQuickMon: Version 3.10: Adding the ability to see 'history' of Collector states (including details of errors or warnings at that time). The history size is configurable (default is switched off) and the Windows Service completely ignores keeping history (no UI or user to access it anyway). The Collector stats window now displays this history plus multiple collector stats windows can be opened at the same time. Additionally fixed a bug in the event log collector that reported an 'Error' state when an 'out of bounds' ...xFunc: xFunc 2.15.4: Fixed bug in Processor.csTFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...WinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.MVCwCMS - ASP.NET MVC CMS: MVCwCMS 2.2.2: Updated CKFinder config. For the installation instructions visit the documentation page: https://mvcwcms.codeplex.com/documentationTerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...ExtJS based ASP.NET Controls: FineUI v4.0.6: FineUI(???) ?? ExtJS ??? ASP.NET ??? FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ??????? ?????? IE 8.0+、Chrome、Firefox、Opera、Safari ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license) ???? ??:http://fineui.com/ ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI ???? ExtJS ????????,???? ExtJS ?,?????: 1. ????? FineUI ? ExtJS ? http://fineui.com/bbs/forum.ph...Office App Model Samples: Office App Model Samples v2.0: Office App Model Samples v2.0Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelWrapper for the PAYMILL API: Paymill API Wrapper: Add Description in PreauthorizationHow to develop an autodialer / predictive dialer in C#: VoIP AutoDialer in C Sharp: This is the downloadable source code for this example project that is intended to help you in developing your own VoIP autodialer application in C#.R.NET: R.NET 1.5.12: R.NET 1.5.12 is a beta release towards R.NET 1.6. You are encouraged to use 1.5.12 now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.12: The C stack limit was not disabled on Windows. For reasons possibly peculiar to R, this means that non-concurrent access to R from multiple threads was not stable. This is now fixed, with the fix validated with a unit test. Thanks to Odugen, skyguy94, and previously others (evolvedmicrobe, tomasp) fo...SEToolbox: SEToolbox 01.029.006 Release 1: Fix to allow keyboard search on load dialog. (type the first few letters of your save) Fixed check for new release. Changed the way ship details are loaded to alleviate load time for worlds with very large ships (100,000+ blocks). Fixed Image importer, was incorrectly listing 'Asteroid' as import option. Minor changes to menus (text and appearance) for clarity and OS consistency. Added in reading of world palette for color dialog editor. WIP on subsystem editor. Can now multiselec...Thaumcraft4 Research: Alpha 2 release, lots of awesome improvements: Performance inprovements asynchronous running of the search Search result-cap ( usefull for long routes, it wont try to find 3000 results ) statistics addedTiny Wifi Host: Tiny Wifi Host 3.0.0.0: Tiny Wifi Hotspot Creator (Portable) v3 size: 50KB-140KB New Features: Friendly name for connected devices instead of Mac-Address (Double click selected device to enter friendly name) Saves device names to devices.xml Better error reporting+solutions Warning sound when number of connected devices exceed a certain number. (useful when only certain number of devices must be connected at a time) Many Bug Fixes. NoAudio files does not include connect, disconnect and warning audio to dec...Media Companion: Media Companion MC3.597b: Thank you for being patient, againThere are a number of fixes in place with this release. and some new features added. Most are self explanatory, so check out the options in Preferences. Couple of new Features:* Movie - Allow save Title and Sort Title in Title Case format. * Movie - Allow save fanart.jpg if movie in folder. * TV - display episode source. Get episode source from episode filename. Fixed:* Movie - Added Fill Tags from plot keywords to Batch Rescraper. * Movie - Fixed TMDB s...New ProjectsBLADE View Engine - An independent RAZOR alternative: An alternative parser and view engine to Asp.net Razor that does not depend on Asp.net or .NET 4.5BPL++: A basic object orientated programming language built upon a virtual machine using C#Caedisi - A Cellular Automata Editor and Simulator for Network Decontamination: A research tool that explores the use of cellular automata in order to decontaminate a network attacked or infected by a virus. Cosmos Software Distrobution 1.0: No content until project released!ETCQuality: ETC QUALITY STAT SYSTEM. ????????????,??????????????。F.A.Q.: F.A.Q. project about Frequently asked questions. Help Viewer Redirector: Enables use of Help Viewer 2.0 or 2.1 with SQL Server instead of Help Viewer 1.0Jet.Payment.Cielo: Projeto contém integração com o serviço e-commerce Cielo, desenvolvido em C#. Criamos esse Helper para nossa própria necessidade. Nos ajude a melhorá-lo.Learning with Pati: Learning Javascript with PatiLeRenard: LeRenard is a collection of solutions (from core helper, extension methods) to libraries, all written in C# to help build applications.MCMP.NET: MCMP.NET allows ASP.NET applications to be added as contexts using mod_cluster.PowerShell Deployment Automation Framework: This project contains resources related to my blog at www.powershellcoach.compravda-f: ??????????? ? ?????? ??? ?????????? ??????sdir: Colorful, sorted and optionally rich directory enumeration for Windows.SienSchoofsProject: school project for .NET ExpertSorting collection of any type by several fields: Sorting collection of any type by several fields with using Reflection and Expression TreesTPS BarCode Scanner: This is going to be a collaboration platform for TPS team. We want to develop a simple low cost bar code generator and scanner system. This project is currentlVerifyDomainOutlookAddIn: ??????????????????????????????。Ynote Packages: Ynote Packages are a collection of tools which a play a crucial role in extending Ynote Classic and understanding it's true potential.??????-??????【??】??????????: ??????????????????,???、???!???????,????????????????,????????????,???! ?????-?????【??】?????????: ????????????、?????、?????、?????、?????、????,???????????,?????,??????! ?????-?????【??】?????????: ???????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ????????????????????,?????,???????,???????????,??????! ??????-??????【??】??????????: ??????????????、??????、????、?????、?????!????,????????????????!????。 ?????-?????【??】?????????: ???????????????????,?????????????????????,?????,????,???????. ?????-?????【??】?????????: ???????????????????、????????、????????、????????、???????,????????????。 ??????-??????【??】??????????: ????????????????、?????、?????、????、?????,??????????。????????????????! ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ????-????【??】????????: ?????????????????????,????????????,?????、??、????,?????,??????! ?????-?????【??】?????????: ???????????????????,??????????,????????、????,??????????,??????????。 ?????-?????【??】?????????: ???????,??????:?????,?????,??????,??????????,????????。????????! ????: ????????,????????????????????????,?????????,????????????????。????????????????????,??????????????,?????????????。 ????????????,?:   ??????   ??????   ????????   ??????-??????【??】??????????: ??????????????????????,???????????????,????????????????????! ??????-??????【??】??????????: ??????????????????、????,??100%????,??????,????????????,???????????! ????-????【??】????????: ???????????、??????????????????,????????,?????,??????,????,????,????! ?????-?????【??】?????????: ????????????????,??????????、??????,??????????、????、????、???????。 ?????--?????【??】?????????: ?????????????????????,???????????????,???????,?????,?????,????? !!!

    Read the article

  • Connecting SceneBuilder edited FXML to Java code

    - by daniel
    Recently I had to answer several questions regarding how to connect an UI built with the JavaFX SceneBuilder 1.0 Developer Preview to Java Code. So I figured out that a short overview might be helpful. But first, let me state the obvious. What is FXML? To make it short, FXML is an XML based declaration format for JavaFX. JavaFX provides an FXML loader which will parse FXML files and from that construct a graph of Java object. It may sound complex when stated like that but it is actually quite simple. Here is an example of FXML file, which instantiate a StackPane and puts a Button inside it: -- <?xml version="1.0" encoding="UTF-8"?> <?import java.lang.*?> <?import java.util.*?> <?import javafx.scene.control.*?> <?import javafx.scene.layout.*?> <?import javafx.scene.paint.*?> <StackPane prefHeight="150.0" prefWidth="200.0" xmlns:fx="http://javafx.com/fxml"> <children> <Button mnemonicParsing="false" text="Button" /> </children> </StackPane> ... and here is the code I would have had to write if I had chosen to do the same thing programatically: import javafx.scene.control.*; import javafx.scene.layout.*; ... final Button button = new Button("Button"); button.setMnemonicParsing(false); final StackPane stackPane = new StackPane(); stackPane.setPrefWidth(200.0); stackPane.setPrefHeight(150.0); stacPane.getChildren().add(button); As you can see - FXML is rather simple to understand - as it is quite close to the JavaFX API. So OK FXML is simple, but why would I use it?Well, there are several answers to that - but my own favorite is: because you can make it with SceneBuilder. What is SceneBuilder? In short SceneBuilder is a layout tool that will let you graphically build JavaFX user interfaces by dragging and dropping JavaFX components from a library, and save it as an FXML file. SceneBuilder can also be used to load and modify JavaFX scenegraphs declared in FXML. Here is how I made the small FXML file above: Start the JavaFX SceneBuilder 1.0 Developer Preview In the Library on the left hand side, click on 'StackPane' and drag it on the content view (the white rectangle) In the Library, select a Button and drag it onto the StackPane on the content view. In the Hierarchy Panel on the left hand side - select the StackPane component, then invoke 'Edit > Trim To Selected' from the menubar That's it - you can now save, and you will obtain the small FXML file shown above. Of course this is only a trivial sample, made for the sake of the example - and SceneBuilder will let you create much more complex UIs. So, I have now an FXML file. But what do I do with it? How do I include it in my program? How do I write my main class? Loading an FXML file with JavaFX Well, that's the easy part - because the piece of code you need to write never changes. You can download and look at the SceneBuilder samples if you need to get convinced, but here is the short version: Create a Java class (let's call it 'Main.java') which extends javafx.application.Application In the same directory copy/save the FXML file you just created using SceneBuilder. Let's name it "simple.fxml" Now here is the Java code for the Main class, which simply loads the FXML file and puts it as root in a stage's scene. /* * Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. */ package simple; import java.util.logging.Level; import java.util.logging.Logger; import javafx.application.Application; import javafx.fxml.FXMLLoader; import javafx.scene.Scene; import javafx.scene.layout.StackPane; import javafx.stage.Stage; public class Main extends Application { /** * @param args the command line arguments */ public static void main(String[] args) { Application.launch(Main.class, (java.lang.String[])null); } @Override public void start(Stage primaryStage) { try { StackPane page = (StackPane) FXMLLoader.load(Main.class.getResource("simple.fxml")); Scene scene = new Scene(page); primaryStage.setScene(scene); primaryStage.setTitle("FXML is Simple"); primaryStage.show(); } catch (Exception ex) { Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex); } } } Great! Now I only have to use my favorite IDE to compile the class and run it. But... wait... what does it do? Well nothing. It just displays a button in the middle of a window. There's no logic attached to it. So how do we do that? How can I connect this button to my application logic? Here is how: Connection to code First let's define our application logic. Since this post is only intended to give a very brief overview - let's keep things simple. Let's say that the only thing I want to do is print a message on System.out when the user clicks on my button. To do that, I'll need to register an action handler with my button. And to do that, I'll need to somehow get a handle on my button. I'll need some kind of controller logic that will get my button and add my action handler to it. So how do I get a handle to my button and pass it to my controller? Once again - this is easy: I just need to write a controller class for my FXML. With each FXML file, it is possible to associate a controller class defined for that FXML. That controller class will make the link between the UI (the objects defined in the FXML) and the application logic. To each object defined in FXML we can associate an fx:id. The value of the id must be unique within the scope of the FXML, and is the name of an instance variable inside the controller class, in which the object will be injected. Since I want to have access to my button, I will need to add an fx:id to my button in FXML, and declare an @FXML variable in my controller class with the same name. In other words - I will need to add fx:id="myButton" to my button in FXML: -- <Button fx:id="myButton" mnemonicParsing="false" text="Button" /> and declare @FXML private Button myButton in my controller class @FXML private Button myButton; // value will be injected by the FXMLLoader Let's see how to do this. Add an fx:id to the Button object Load "simple.fxml" in SceneBuilder - if not already done In the hierarchy panel (bottom left), or directly on the content view, select the Button object. Open the Properties sections of the inspector (right panel) for the button object At the top of the section, you will see a text field labelled fx:id. Enter myButton in that field and validate. Associate a controller class with the FXML file Still in SceneBuilder, select the top root object (in our case, that's the StackPane), and open the Code section of the inspector (right hand side) At the top of the section you should see a text field labelled Controller Class. In the field, type simple.SimpleController. This is the name of the class we're going to create manually. If you save at this point, the FXML will look like this: -- <?xml version="1.0" encoding="UTF-8"?> <?import java.lang.*?> <?import java.util.*?> <?import javafx.scene.control.*?> <?import javafx.scene.layout.*?> <?import javafx.scene.paint.*?> <StackPane prefHeight="150.0" prefWidth="200.0" xmlns:fx="http://javafx.com/fxml" fx:controller="simple.SimpleController"> <children> <Button fx:id="myButton" mnemonicParsing="false" text="Button" /> </children> </StackPane> As you can see, the name of the controller class has been added to the root object: fx:controller="simple.SimpleController" Coding the controller class In your favorite IDE, create an empty SimpleController.java class. Now what does a controller class looks like? What should we put inside? Well - SceneBuilder will help you there: it will show you an example of controller skeleton tailored for your FXML. In the menu bar, invoke View > Show Sample Controller Skeleton. A popup appears, displaying a suggestion for the controller skeleton: copy the code displayed there, and paste it into your SimpleController.java: /** * Sample Skeleton for "simple.fxml" Controller Class * Use copy/paste to copy paste this code into your favorite IDE **/ package simple; import java.net.URL; import java.util.ResourceBundle; import javafx.fxml.FXML; import javafx.fxml.Initializable; import javafx.scene.control.Button; public class SimpleController implements Initializable { @FXML // fx:id="myButton" private Button myButton; // Value injected by FXMLLoader @Override // This method is called by the FXMLLoader when initialization is complete public void initialize(URL fxmlFileLocation, ResourceBundle resources) { assert myButton != null : "fx:id=\"myButton\" was not injected: check your FXML file 'simple.fxml'."; // initialize your logic here: all @FXML variables will have been injected } } Note that the code displayed by SceneBuilder is there only for educational purpose: SceneBuilder does not create and does not modify Java files. This is simply a hint of what you can use, given the fx:id present in your FXML file. You are free to copy all or part of the displayed code and paste it into your own Java class. Now at this point, there only remains to add our logic to the controller class. Quite easy: in the initialize method, I will register an action handler with my button: () { @Override public void handle(ActionEvent event) { System.out.println("That was easy, wasn't it?"); } }); ... -- ... // initialize your logic here: all @FXML variables will have been injected myButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { System.out.println("That was easy, wasn't it?"); } }); ... That's it - if you now compile everything in your IDE, and run your application, clicking on the button should print a message on the console! Summary What happens is that in Main.java, the FXMLLoader will load simple.fxml from the jar/classpath, as specified by 'FXMLLoader.load(Main.class.getResource("simple.fxml"))'. When loading simple.fxml, the loader will find the name of the controller class, as specified by 'fx:controller="simple.SimpleController"' in the FXML. Upon finding the name of the controller class, the loader will create an instance of that class, in which it will try to inject all the objects that have an fx:id in the FXML. Thus, after having created '<Button fx:id="myButton" ... />', the FXMLLoader will inject the button instance into the '@FXML private Button myButton;' instance variable found on the controller instance. This is because The instance variable has an @FXML annotation, The name of the variable exactly matches the value of the fx:id Finally, when the whole FXML has been loaded, the FXMLLoader will call the controller's initialize method, and our code that registers an action handler with the button will be executed. For a complete example, take a look at the HelloWorld SceneBuilder sample. Also make sure to follow the SceneBuilder Get Started guide, which will guide you through a much more complete example. Of course, there are more elegant ways to set up an Event Handler using FXML and SceneBuilder. There are also many different ways to work with the FXMLLoader. But since it's starting to be very late here, I think it will have to wait for another post. I hope you have enjoyed the tour! --daniel

    Read the article

  • Selling Federal Enterprise Architecture (EA)

    - by TedMcLaughlan
    Selling Federal Enterprise Architecture A taxonomy of subject areas, from which to develop a prioritized marketing and communications plan to evangelize EA activities within and among US Federal Government organizations and constituents. Any and all feedback is appreciated, particularly in developing and extending this discussion as a tool for use – more information and details are also available. "Selling" the discipline of Enterprise Architecture (EA) in the Federal Government (particularly in non-DoD agencies) is difficult, notwithstanding the general availability and use of the Federal Enterprise Architecture Framework (FEAF) for some time now, and the relatively mature use of the reference models in the OMB Capital Planning and Investment (CPIC) cycles. EA in the Federal Government also tends to be a very esoteric and hard to decipher conversation – early apologies to those who agree to continue reading this somewhat lengthy article. Alignment to the FEAF and OMB compliance mandates is long underway across the Federal Departments and Agencies (and visible via tools like PortfolioStat and ITDashboard.gov – but there is still a gap between the top-down compliance directives and enablement programs, and the bottom-up awareness and effective use of EA for either IT investment management or actual mission effectiveness. "EA isn't getting deep enough penetration into programs, components, sub-agencies, etc.", verified a panelist at the most recent EA Government Conference in DC. Newer guidance from OMB may be especially difficult to handle, where bottom-up input can't be accurately aligned, analyzed and reported via standardized EA discipline at the Agency level – for example in addressing the new (for FY13) Exhibit 53D "Agency IT Reductions and Reinvestments" and the information required for "Cloud Computing Alternatives Evaluation" (supporting the new Exhibit 53C, "Agency Cloud Computing Portfolio"). Therefore, EA must be "sold" directly to the communities that matter, from a coordinated, proactive messaging perspective that takes BOTH the Program-level value drivers AND the broader Agency mission and IT maturity context into consideration. Selling EA means persuading others to take additional time and possibly assign additional resources, for a mix of direct and indirect benefits – many of which aren't likely to be realized in the short-term. This means there's probably little current, allocated budget to work with; ergo the challenge of trying to sell an "unfunded mandate". Also, the concept of "Enterprise" in large Departments like Homeland Security tends to cross all kinds of organizational boundaries – as Richard Spires recently indicated by commenting that "...organizational boundaries still trump functional similarities. Most people understand what we're trying to do internally, and at a high level they get it. The problem, of course, is when you get down to them and their system and the fact that you're going to be touching them...there's always that fear factor," Spires said. It is quite clear to the Federal IT Investment community that for EA to meet its objective, understandable, relevant value must be measured and reported using a repeatable method – as described by GAO's recent report "Enterprise Architecture Value Needs To Be Measured and Reported". What's not clear is the method or guidance to sell this value. In fact, the current GAO "Framework for Assessing and Improving Enterprise Architecture Management (Version 2.0)", a.k.a. the "EAMMF", does not include words like "sell", "persuade", "market", etc., except in reference ("within Core Element 19: Organization business owner and CXO representatives are actively engaged in architecture development") to a brief section in the CIO Council's 2001 "Practical Guide to Federal Enterprise Architecture", entitled "3.3.1. Develop an EA Marketing Strategy and Communications Plan." Furthermore, Core Element 19 of the EAMMF is advised to be applied in "Stage 3: Developing Initial EA Versions". This kind of EA sales campaign truly should start much earlier in the maturity progress, i.e. in Stages 0 or 1. So, what are the understandable, relevant benefits (or value) to sell, that can find an agreeable, participatory audience, and can pave the way towards success of a longer-term, funded set of EA mechanisms that can be methodically measured and reported? Pragmatic benefits from a useful EA that can help overcome the fear of change? And how should they be sold? Following is a brief taxonomy (it's a taxonomy, to help organize SME support) of benefit-related subjects that might make the most sense, in creating the messages and organizing an initial "engagement plan" for evangelizing EA "from within". An EA "Sales Taxonomy" of sorts. We're not boiling the ocean here; the subjects that are included are ones that currently appear to be urgently relevant to the current Federal IT Investment landscape. Note that successful dialogue in these topics is directly usable as input or guidance for actually developing early-stage, "Fit-for-Purpose" (a DoDAF term) Enterprise Architecture artifacts, as prescribed by common methods found in most EA methodologies, including FEAF, TOGAF, DoDAF and our own Oracle Enterprise Architecture Framework (OEAF). The taxonomy below is organized by (1) Target Community, (2) Benefit or Value, and (3) EA Program Facet - as in: "Let's talk to (1: Community Member) about how and why (3: EA Facet) the EA program can help with (2: Benefit/Value)". Once the initial discussion targets and subjects are approved (that can be measured and reported), a "marketing and communications plan" can be created. A working example follows the Taxonomy. Enterprise Architecture Sales Taxonomy Draft, Summary Version 1. Community 1.1. Budgeted Programs or Portfolios Communities of Purpose (CoPR) 1.1.1. Program/System Owners (Senior Execs) Creating or Executing Acquisition Plans 1.1.2. Program/System Owners Facing Strategic Change 1.1.2.1. Mandated 1.1.2.2. Expected/Anticipated 1.1.3. Program Managers - Creating Employee Performance Plans 1.1.4. CO/COTRs – Creating Contractor Performance Plans, or evaluating Value Engineering Change Proposals (VECP) 1.2. Governance & Communications Communities of Practice (CoP) 1.2.1. Policy Owners 1.2.1.1. OCFO 1.2.1.1.1. Budget/Procurement Office 1.2.1.1.2. Strategic Planning 1.2.1.2. OCIO 1.2.1.2.1. IT Management 1.2.1.2.2. IT Operations 1.2.1.2.3. Information Assurance (Cyber Security) 1.2.1.2.4. IT Innovation 1.2.1.3. Information-Sharing/ Process Collaboration (i.e. policies and procedures regarding Partners, Agreements) 1.2.2. Governing IT Council/SME Peers (i.e. an "Architects Council") 1.2.2.1. Enterprise Architects (assumes others exist; also assumes EA participants aren't buried solely within the CIO shop) 1.2.2.2. Domain, Enclave, Segment Architects – i.e. the right affinity group for a "shared services" EA structure (per the EAMMF), which may be classified as Federated, Segmented, Service-Oriented, or Extended 1.2.2.3. External Oversight/Constraints 1.2.2.3.1. GAO/OIG & Legal 1.2.2.3.2. Industry Standards 1.2.2.3.3. Official public notification, response 1.2.3. Mission Constituents Participant & Analyst Community of Interest (CoI) 1.2.3.1. Mission Operators/Users 1.2.3.2. Public Constituents 1.2.3.3. Industry Advisory Groups, Stakeholders 1.2.3.4. Media 2. Benefit/Value (Note the actual benefits may not be discretely attributable to EA alone; EA is a very collaborative, cross-cutting discipline.) 2.1. Program Costs – EA enables sound decisions regarding... 2.1.1. Cost Avoidance – a TCO theme 2.1.2. Sequencing – alignment of capability delivery 2.1.3. Budget Instability – a Federal reality 2.2. Investment Capital – EA illuminates new investment resources via... 2.2.1. Value Engineering – contractor-driven cost savings on existing budgets, direct or collateral 2.2.2. Reuse – reuse of investments between programs can result in savings, chargeback models; avoiding duplication 2.2.3. License Refactoring – IT license & support models may not reflect actual or intended usage 2.3. Contextual Knowledge – EA enables informed decisions by revealing... 2.3.1. Common Operating Picture (COP) – i.e. cross-program impacts and synergy, relative to context 2.3.2. Expertise & Skill – who truly should be involved in architectural decisions, both business and IT 2.3.3. Influence – the impact of politics and relationships can be examined 2.3.4. Disruptive Technologies – new technologies may reduce costs or mitigate risk in unanticipated ways 2.3.5. What-If Scenarios – can become much more refined, current, verifiable; basis for Target Architectures 2.4. Mission Performance – EA enables beneficial decision results regarding... 2.4.1. IT Performance and Optimization – towards 100% effective, available resource utilization 2.4.2. IT Stability – towards 100%, real-time uptime 2.4.3. Agility – responding to rapid changes in mission 2.4.4. Outcomes –measures of mission success, KPIs – vs. only "Outputs" 2.4.5. Constraints – appropriate response to constraints 2.4.6. Personnel Performance – better line-of-sight through performance plans to mission outcome 2.5. Mission Risk Mitigation – EA mitigates decision risks in terms of... 2.5.1. Compliance – all the right boxes are checked 2.5.2. Dependencies –cross-agency, segment, government 2.5.3. Transparency – risks, impact and resource utilization are illuminated quickly, comprehensively 2.5.4. Threats and Vulnerabilities – current, realistic awareness and profiles 2.5.5. Consequences – realization of risk can be mapped as a series of consequences, from earlier decisions or new decisions required for current issues 2.5.5.1. Unanticipated – illuminating signals of future or non-symmetric risk; helping to "future-proof" 2.5.5.2. Anticipated – discovering the level of impact that matters 3. EA Program Facet (What parts of the EA can and should be communicated, using business or mission terms?) 3.1. Architecture Models – the visual tools to be created and used 3.1.1. Operating Architecture – the Business Operating Model/Architecture elements of the EA truly drive all other elements, plus expose communication channels 3.1.2. Use Of – how can the EA models be used, and how are they populated, from a reasonable, pragmatic yet compliant perspective? What are the core/minimal models required? What's the relationship of these models, with existing system models? 3.1.3. Scope – what level of granularity within the models, and what level of abstraction across the models, is likely to be most effective and useful? 3.2. Traceability – the maturity, status, completeness of the tools 3.2.1. Status – what in fact is the degree of maturity across the integrated EA model and other relevant governance models, and who may already be benefiting from it? 3.2.2. Visibility – how does the EA visibly and effectively prove IT investment performance goals are being reached, with positive mission outcome? 3.3. Governance – what's the interaction, participation method; how are the tools used? 3.3.1. Contributions – how is the EA program informed, accept submissions, collect data? Who are the experts? 3.3.2. Review – how is the EA validated, against what criteria?  Taxonomy Usage Example:   1. To speak with: a. ...a particular set of System Owners Facing Strategic Change, via mandate (like the "Cloud First" mandate); about... b. ...how the EA program's visible and easily accessible Infrastructure Reference Model (i.e. "IRM" or "TRM"), if updated more completely with current system data, can... c. ...help shed light on ways to mitigate risks and avoid future costs associated with NOT leveraging potentially-available shared services across the enterprise... 2. ....the following Marketing & Communications (Sales) Plan can be constructed: a. Create an easy-to-read "Consequence Model" that illustrates how adoption of a cloud capability (like elastic operational storage) can enable rapid and durable compliance with the mandate – using EA traceability. Traceability might be from the IRM to the ARM (that identifies reusable services invoking the elastic storage), and then to the PRM with performance measures (such as % utilization of purchased storage allocation) included in the OMB Exhibits; and b. Schedule a meeting with the Program Owners, timed during their Acquisition Strategy meetings in response to the mandate, to use the "Consequence Model" for advising them to organize a rapid and relevant RFI solicitation for this cloud capability (regarding alternatives for sourcing elastic operational storage); and c. Schedule a series of short "Discovery" meetings with the system architecture leads (as agreed by the Program Owners), to further populate/validate the "As-Is" models and frame the "To Be" models (via scenarios), to better inform the RFI, obtain the best feedback from the vendor community, and provide potential value for and avoid impact to all other programs and systems. --end example -- Note that communications with the intended audience should take a page out of the standard "Search Engine Optimization" (SEO) playbook, using keywords and phrases relating to "value" and "outcome" vs. "compliance" and "output". Searches in email boxes, internal and external search engines for phrases like "cost avoidance strategies", "mission performance metrics" and "innovation funding" should yield messages and content from the EA team. This targeted, informed, practical sales approach should result in additional buy-in and participation, additional EA information contribution and model validation, development of more SMEs and quick "proof points" (with real-life testing) to bolster the case for EA. The proof point here is a successful, timely procurement that satisfies not only the external mandate and external oversight review, but also meets internal EA compliance/conformance goals and therefore is more transparently useful across the community. In short, if sold effectively, the EA will perform and be recognized. EA won’t therefore be used only for compliance, but also (according to a validated, stated purpose) to directly influence decisions and outcomes. The opinions, views and analysis expressed in this document are those of the author and do not necessarily reflect the views of Oracle.

    Read the article

  • Can't connect to samba

    - by Rick
    Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

    Read the article

  • Configuring OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

    Read the article

  • Tomcat IIS 7 Integration gives 503 errors on all requests.

    - by Yvan JANSSENS
    Hi, After many attempts to install Tomcat on IIS 7, I finally managed to get it working. At least I think so :-S. I finally got the 500 errors away, by setting the correct permissions. The only thing that doesn't work is ... serving stuff: neither regular stuff (like ASP, HTML files, or directory browsing) or Tomcat things work. Here are my configs: Worker.properties # The workers that your plugins should create and work with # worker.list=worker1 #------ DEFAULT ajp13 WORKER DEFINITION ------------------------------ #--------------------------------------------------------------------- # Defining a worker named ajp13 and of type ajp13 # Note that the name and the type do not have to match. # worker.worker1.port=8009 worker.worker1.host=127.0.0.1 worker.worker1.type=ajp13 URIWorkerMap.properties /|/*=worker1 # Exclude the subdirectory static: !/static|/*=worker1 # Exclude some suffixes: !*.html=worker1 !*.asp=worker1 Server.xml <?xml version='1.0' encoding='utf-8'?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --> <Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> </Host> </Engine> </Service> </Server> http://localhost:8080 is working, I can view the apps and configure them there... I'm quite new to IIS 7, I used to work with IIS 6. Thanks in advance, Yvan

    Read the article

  • Lighttpd not cleanly restarting (address already in use)

    - by NilObject
    When doing a dist-upgrade recently, my lighttpd-1.4.19 install on Ubuntu 8.0.4 has begun failing to restart or reload properly with the /etc/init.d/lighttpd restart command. ~$ sudo /etc/init.d/lighttpd restart * Stopping web server lighttpd ...done. * Starting web server lighttpd 2009-06-13 04:06:36: (network.c.300) can't bind to port: 80 Address already in use ...fail! The same error occurs when I do a reload. The way I get around it is to kill lighttpd and then issue the start command, but it seems like I shouldn't have to do that :) I've looked at my config files, and can't spot any immediate errors. Does anyone have any ideas what can be causing this error? This seems to be the latest version as of writing this question that is available via the apt-get route. My config file is: # Debian lighttpd configuration file # ############ Options you really have to take care of #################### ## modules to load # mod_access, mod_accesslog and mod_alias are loaded by default # all other module should only be loaded if neccesary # - saves some time # - saves memory server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_compress", "mod_fastcgi", "mod_rewrite", "mod_redirect", ) ## a static document-root, for virtual-hosting take look at the ## server.virtual-* options server.document-root = "/var/www/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" fastcgi.server = (".php" => (( "bin-path" => "/usr/bin/php5-cgi", "socket" => "/tmp/php.socket" ))) ## files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) ## Use the "Content-Type" extended attribute to obtain mime type if possible # mimetype.use-xattr = "enable" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "audio/x-wav", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".rss" => "application/rss+xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar" ) include_shell "/usr/share/lighttpd/include-conf-enabled.pl" My /etc/init.d/lighttpd script is (untouched from installation): #!/bin/sh ### BEGIN INIT INFO # Provides: lighttpd # Required-Start: networking # Required-Stop: networking # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start the lighttpd web server. ### END INIT INFO PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/sbin/lighttpd NAME=lighttpd DESC="web server" PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME ENV="env -i LANG=C PATH=/usr/local/bin:/usr/bin:/bin" SSD="/sbin/start-stop-daemon" DAEMON_OPTS="-f /etc/lighttpd/lighttpd.conf" test -x $DAEMON || exit 0 set -e # be sure there is a /var/run/lighttpd, even with tmpfs mkdir -p /var/run/lighttpd > /dev/null 2> /dev/null chown www-data:www-data /var/run/lighttpd chmod 0750 /var/run/lighttpd . /lib/lsb/init-functions case "$1" in start) log_daemon_msg "Starting $DESC" $NAME if ! $ENV $SSD --start --quiet\ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 1 else log_end_msg 0 fi ;; stop) log_daemon_msg "Stopping $DESC" $NAME if $SSD --quiet --stop --oknodo --retry 30\ --pidfile $PIDFILE --exec $DAEMON; then rm -f $PIDFILE log_end_msg 0 else log_end_msg 1 fi ;; reload) log_daemon_msg "Reloading $DESC configuration" $NAME if $SSD --stop --signal 2 --oknodo --retry 30\ --quiet --pidfile $PIDFILE --exec $DAEMON; then if $ENV $SSD --start --quiet \ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 0 else log_end_msg 1 fi else log_end_msg 1 fi ;; restart|force-reload) $0 stop [ -r $PIDFILE ] && while pidof lighttpd |\ grep -q `cat $PIDFILE 2>/dev/null` 2>/dev/null ; do sleep 1; done $0 start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 exit 1 ;; esac exit 0

    Read the article

  • cannot access localhost using ip

    - by Robert
    I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --><!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --><Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener"/> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine defaultHost="localhost" name="Catalina"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

    Read the article

  • mfc tab control switch tabs

    - by MRM
    I created a simple tab control that has 2 tabs (each tab is a different dialog). The thing is that i don't have any idea how to switch between tabs (when the user presses Titlu Tab1 to show the dialog i made for the first tab, and when it presses Titlu Tab2 to show my other dialog). I added a handler for changing items, but i don't know how should i acces some kind of index or child for tabs. Tab1.h and Tab2.h are headers for dialogs that show only static texts with the name of the each tab. There may be an obvious answer to my question, but i am a real newbie in c++ and MFC. This is my header: // CTabControlDlg.h : header file // #pragma once #include "afxcmn.h" #include "Tab1.h" #include "Tab2.h" // CCTabControlDlg dialog class CCTabControlDlg : public CDialog { // Construction public: CCTabControlDlg(CWnd* pParent = NULL); // standard constructor // Dialog Data enum { IDD = IDD_CTABCONTROL_DIALOG }; protected: virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support // Implementation protected: HICON m_hIcon; // Generated message map functions virtual BOOL OnInitDialog(); afx_msg void OnSysCommand(UINT nID, LPARAM lParam); afx_msg void OnPaint(); afx_msg HCURSOR OnQueryDragIcon(); DECLARE_MESSAGE_MAP() public: CTabCtrl m_tabcontrol1; CTab1 m_tab1; CTab2 m_tab2; afx_msg void OnTcnSelchangeTabcontrol(NMHDR *pNMHDR, LRESULT *pResult); }; And this is the .cpp: // CTabControlDlg.cpp : implementation file // #include "stdafx.h" #include "CTabControl.h" #include "CTabControlDlg.h" #ifdef _DEBUG #define new DEBUG_NEW #endif // CAboutDlg dialog used for App About class CAboutDlg : public CDialog { public: CAboutDlg(); // Dialog Data enum { IDD = IDD_ABOUTBOX }; protected: virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support // Implementation protected: DECLARE_MESSAGE_MAP() }; CAboutDlg::CAboutDlg() : CDialog(CAboutDlg::IDD) { } void CAboutDlg::DoDataExchange(CDataExchange* pDX) { CDialog::DoDataExchange(pDX); } BEGIN_MESSAGE_MAP(CAboutDlg, CDialog) END_MESSAGE_MAP() // CCTabControlDlg dialog CCTabControlDlg::CCTabControlDlg(CWnd* pParent /*=NULL*/) : CDialog(CCTabControlDlg::IDD, pParent) { m_hIcon = AfxGetApp()->LoadIcon(IDR_MAINFRAME); } void CCTabControlDlg::DoDataExchange(CDataExchange* pDX) { CDialog::DoDataExchange(pDX); DDX_Control(pDX, IDC_TABCONTROL, m_tabcontrol1); } BEGIN_MESSAGE_MAP(CCTabControlDlg, CDialog) ON_WM_SYSCOMMAND() ON_WM_PAINT() ON_WM_QUERYDRAGICON() //}}AFX_MSG_MAP ON_NOTIFY(TCN_SELCHANGE, IDC_TABCONTROL, &CCTabControlDlg::OnTcnSelchangeTabcontrol) END_MESSAGE_MAP() // CCTabControlDlg message handlers BOOL CCTabControlDlg::OnInitDialog() { CDialog::OnInitDialog(); // Add "About..." menu item to system menu. // IDM_ABOUTBOX must be in the system command range. ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX); ASSERT(IDM_ABOUTBOX < 0xF000); CMenu* pSysMenu = GetSystemMenu(FALSE); if (pSysMenu != NULL) { CString strAboutMenu; strAboutMenu.LoadString(IDS_ABOUTBOX); if (!strAboutMenu.IsEmpty()) { pSysMenu->AppendMenu(MF_SEPARATOR); pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu); } } // Set the icon for this dialog. The framework does this automatically // when the application's main window is not a dialog SetIcon(m_hIcon, TRUE); // Set big icon SetIcon(m_hIcon, FALSE); // Set small icon // TODO: Add extra initialization here CTabCtrl* pTabCtrl = (CTabCtrl*)GetDlgItem(IDC_TABCONTROL); m_tab1.Create(IDD_TAB1, pTabCtrl); TCITEM item1; item1.mask = TCIF_TEXT | TCIF_PARAM; item1.lParam = (LPARAM)& m_tab1; item1.pszText = _T("Titlu Tab1"); pTabCtrl->InsertItem(0, &item1); //Pozitionarea dialogului CRect rcItem; pTabCtrl->GetItemRect(0, &rcItem); m_tab1.SetWindowPos(NULL, rcItem.left, rcItem.bottom + 1, 0, 0, SWP_NOSIZE | SWP_NOZORDER ); m_tab1.ShowWindow(SW_SHOW); // al doilea tab m_tab2.Create(IDD_TAB2, pTabCtrl); TCITEM item2; item2.mask = TCIF_TEXT | TCIF_PARAM; item2.lParam = (LPARAM)& m_tab1; item2.pszText = _T("Titlu Tab2"); pTabCtrl->InsertItem(0, &item2); //Pozitionarea dialogului //CRect rcItem; pTabCtrl->GetItemRect(0, &rcItem); m_tab2.SetWindowPos(NULL, rcItem.left, rcItem.bottom + 1, 0, 0, SWP_NOSIZE | SWP_NOZORDER ); m_tab2.ShowWindow(SW_SHOW); return TRUE; // return TRUE unless you set the focus to a control } void CCTabControlDlg::OnSysCommand(UINT nID, LPARAM lParam) { if ((nID & 0xFFF0) == IDM_ABOUTBOX) { CAboutDlg dlgAbout; dlgAbout.DoModal(); } else { CDialog::OnSysCommand(nID, lParam); } } // If you add a minimize button to your dialog, you will need the code below // to draw the icon. For MFC applications using the document/view model, // this is automatically done for you by the framework. void CCTabControlDlg::OnPaint() { if (IsIconic()) { CPaintDC dc(this); // device context for painting SendMessage(WM_ICONERASEBKGND, reinterpret_cast<WPARAM>(dc.GetSafeHdc()), 0); // Center icon in client rectangle int cxIcon = GetSystemMetrics(SM_CXICON); int cyIcon = GetSystemMetrics(SM_CYICON); CRect rect; GetClientRect(&rect); int x = (rect.Width() - cxIcon + 1) / 2; int y = (rect.Height() - cyIcon + 1) / 2; // Draw the icon dc.DrawIcon(x, y, m_hIcon); } else { CDialog::OnPaint(); } } // The system calls this function to obtain the cursor to display while the user drags // the minimized window. HCURSOR CCTabControlDlg::OnQueryDragIcon() { return static_cast<HCURSOR>(m_hIcon); } void CCTabControlDlg::OnTcnSelchangeTabcontrol(NMHDR *pNMHDR, LRESULT *pResult) { // TODO: Add your control notification handler code here *pResult = 0; }

    Read the article

  • Hibernate Lazy initialization exception problem with Gilead in GWT 2.0 integration

    - by sylsau
    Hello, I use GWT 2.0 as UI layer on my project. On server side, I use Hibernate. For example, this is 2 domains entities that I have : public class User { private Collection<Role> roles; @ManyToMany(cascade = CascadeType.ALL, fetch = FetchType.LAZY, mappedBy = "users", targetEntity = Role.class) public Collection<Role> getRoles() { return roles; } ... } public class Role { private Collection<User> users; @ManyToMany(cascade = CascadeType.ALL, fetch = FetchType.LAZY, targetEntity = User.class) public Collection<User> getUsers() { return users; } ... } On my DAO layer, I use UserDAO that extends HibernateDAOSupport from Spring. UserDAO has getAll method to return all of Users. And on my DAO service, I use UserService that uses userDAO to getAll of Users. So, when I get all of Users from UsersService, Users entities returned are detached from Hibernate session. For that reason, I don't want to use getRoles() method on Users instance that I get from my service. What I want is just to transfer my list of Users thanks to a RPC Service to be able to use others informations of Users in client side with GWT. Thus, my main problem is to be able to convert PersistentBag in Users.roles in simple List to be able to transfer via RPC the Users. To do that, I have seen that Gilead Framework could be a solution. In order to use Gilead, I have changed my domains entities. Now, they extend net.sf.gilead.pojo.gwt.LightEntity and they respect JavaBean specification. On server, I expose my services via RPC thanks to GwtRpcSpring framework (http://code.google.com/p/gwtrpc-spring/). This framework has an advice that makes easier Gilead integration. My applicationContext contains the following configuration for Gilead : <bean id="gileadAdapterAdvisor" class="org.gwtrpcspring.gilead.GileadAdapterAdvice" /> <aop:config> <aop:aspect id="gileadAdapterAspect" ref="gileadAdapterAdvisor"> <aop:pointcut id="gileadPointcut" expression="execution(public * com.google.gwt.user.client.rpc.RemoteService.*(..))" /> <aop:around method="doBasicProfiling" pointcut-ref="gileadPointcut" /> </aop:aspect> </aop:config> <bean id="proxySerializer" class="net.sf.gilead.core.serialization.GwtProxySerialization" /> <bean id="proxyStore" class="net.sf.gilead.core.store.stateless.StatelessProxyStore"> <property name="proxySerializer" ref="proxySerializer" /> </bean> <bean id="persistenceUtil" class="net.sf.gilead.core.hibernate.HibernateUtil"> <property name="sessionFactory" ref="sessionFactory" /> </bean> <bean class="net.sf.gilead.core.PersistentBeanManager"> <property name="proxyStore" ref="proxyStore" /> <property name="persistenceUtil" ref="persistenceUtil" /> </bean> The code of the the method doBasicProfiling is the following : @Around("within(com.google.gwt.user.client.rpc.RemoteService..*)") public Object doBasicProfiling(ProceedingJoinPoint pjp) throws Throwable { if (log.isDebugEnabled()) { String className = pjp.getSignature().getDeclaringTypeName(); String methodName = className .substring(className.lastIndexOf(".") + 1) + "." + pjp.getSignature().getName(); log.debug("Wrapping call to " + methodName + " for PersistentBeanManager"); } GileadHelper.parseInputParameters(pjp.getArgs(), beanManager, RemoteServiceUtil.getThreadLocalSession()); Object retVal = pjp.proceed(); retVal = GileadHelper.parseReturnValue(retVal, beanManager); return retVal; } With that configuration, when I run my application and I use my RPC Service that gets all of Users, I obtain a lazy initialization exception from Hibernate from Users.roles. I am disappointed because I thought that Gilead would let me to serialize my domain entities even if these entities contained PersistentBag. It's not one of the goals of Gilead ? So, someone would know how to configure Gilead (with GwtRpcSpring or other solution) to be able to transfer domain entities without Lazy exception ? Thanks by advance for your help. Sylvain

    Read the article

  • Integrate openid4java to GWT Project

    - by Slyker
    Hi, I created an GWT project in eclipse. Now I tried to implement openId with using the openid4java library. I imported the .jar files via properties--java build path: openid4java-0.9.5.jar lib/*.jar In addition I copied the .jar files into the war/WEB-INF/lib directory. The problem at hand comes up when I call the authenticate() method. Then I get a: HTTP ERROR 500 Problem accessing /openid/openid. Reason: access denied (java.lang.RuntimePermission modifyThreadGroup)Caused by:java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup) at java.security.AccessControlContext.checkPermission(Unknown Source) at java.security.AccessController.checkPermission(Unknown Source) at java.lang.SecurityManager.checkPermission(Unknown Source) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkPermission(DevAppServerFactory.java:166) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkAccess(DevAppServerFactory.java:191) at java.lang.ThreadGroup.checkAccess(Unknown Source) at java.lang.Thread.init(Unknown Source) at java.lang.Thread.<init>(Unknown Source) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$ReferenceQueueThread.<init>(MultiThreadedHttpConnectionManager.java:1039) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager.storeReferenceToConnection(MultiThreadedHttpConnectionManager.java:164) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager.access$900(MultiThreadedHttpConnectionManager.java:64) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$ConnectionPool.createConnection(MultiThreadedHttpConnectionManager.java:750) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager.doGetConnection(MultiThreadedHttpConnectionManager.java:469) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager.getConnectionWithTimeout(MultiThreadedHttpConnectionManager.java:394) at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:152) at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:396) at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:324) at org.openid4java.util.HttpCache.head(HttpCache.java:296) at org.openid4java.discovery.yadis.YadisResolver.retrieveXrdsLocation(YadisResolver.java:360) at org.openid4java.discovery.yadis.YadisResolver.discover(YadisResolver.java:229) at org.openid4java.discovery.yadis.YadisResolver.discover(YadisResolver.java:221) at org.openid4java.discovery.yadis.YadisResolver.discover(YadisResolver.java:179) at org.openid4java.discovery.Discovery.discover(Discovery.java:134) at org.openid4java.discovery.Discovery.discover(Discovery.java:114) at org.openid4java.consumer.ConsumerManager.discover(ConsumerManager.java:527) at auth.openid.server.OpenIDServlet.authenticate(OpenIDServlet.java:138) at auth.openid.server.OpenIDServlet.doGet(OpenIDServlet.java:101) at javax.servlet.http.HttpServlet.service(HttpServlet.java:693) at javax.servlet.http.HttpServlet.service(HttpServlet.java:806) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:511) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1166) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:122) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:388) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:418) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:349) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:326) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:542) at org.mortbay.jetty.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:923) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:547) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:409) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:582) Here my servlet source: import com.google.gwt.user.client.rpc.RemoteService; import org.openid4java.OpenIDException; import org.openid4java.consumer.ConsumerException; import org.openid4java.consumer.ConsumerManager; import org.openid4java.consumer.VerificationResult; import org.openid4java.discovery.DiscoveryInformation; import org.openid4java.discovery.Identifier; import org.openid4java.message.AuthRequest; import org.openid4java.message.ParameterList; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.IOException; import java.text.MessageFormat; import java.util.List; public final class OpenIDServlet extends HttpServlet implements RemoteService { private final ConsumerManager manager; public OpenIDServlet() { try { manager = new ConsumerManager(); } catch (ConsumerException e) { throw new RuntimeException("Error creating consumer manager", e); } } ... private void authenticate(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException { final String loginString = request.getParameter(nameParameter); try { // perform discovery on the user-supplied identifier List discoveries = manager.discover(loginString); // attempt to associate with the OpenID provider // and retrieve one service endpoint for authentication DiscoveryInformation discovered = manager.associate(discoveries); // obtain a AuthRequest message to be sent to the OpenID provider AuthRequest authReq = manager.authenticate(discovered, "openid", null); // redirect to OpenID for authentication response.sendRedirect(authReq.getDestinationUrl(true)); } catch (OpenIDException e) { throw new ServletException("Login string probably caused an error. loginString = " + loginString, e); } } My question now is: What could be my fault? Did I make any mistakes in importing the openid4java library? (which?) All other methods in the servlet which do not use the openid4java implementation work fine. Thanks, Andreas

    Read the article

  • XML over HTTP with JMS and Spring

    - by Will Sumekar
    I have a legacy HTTP server where I need to send an XML file over HTTP request (POST) using Java (not browser) and the server will respond with another XML in its HTTP response. It is similar to Web Service but there's no WSDL and I have to follow the existing XML structure to construct my XML to be sent. I have done a research and found an example that matches my requirement here. The example uses HttpClient from Apache Commons. (There are also other examples I found but they use java.net networking package (like URLConnection) which is tedious so I don't want to use them). But it's also my requirement to use Spring and JMS. I know from Spring's reference that it's possible to combine HttpClient, JMS and Spring. My question is, how? Note that it's NOT in my requirement to use HttpClient. If you have a better suggestion, I'm welcome. Appreciate it. For your reference, here's the XML-over-HTTP example I've been talking about: /* * $Header: * $Revision$ * $Date$ * ==================================================================== * * Copyright 2002-2004 The Apache Software Foundation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ==================================================================== * * This software consists of voluntary contributions made by many * individuals on behalf of the Apache Software Foundation. For more * information on the Apache Software Foundation, please see * <http://www.apache.org/>. * * [Additional notices, if required by prior licensing conditions] * */ import java.io.File; import java.io.FileInputStream; import org.apache.commons.httpclient.HttpClient; import org.apache.commons.httpclient.methods.InputStreamRequestEntity; import org.apache.commons.httpclient.methods.PostMethod; /** * * This is a sample application that demonstrates * how to use the Jakarta HttpClient API. * * This application sends an XML document * to a remote web server using HTTP POST * * @author Sean C. Sullivan * @author Ortwin Glück * @author Oleg Kalnichevski */ public class PostXML { /** * * Usage: * java PostXML http://mywebserver:80/ c:\foo.xml * * @param args command line arguments * Argument 0 is a URL to a web server * Argument 1 is a local filename * */ public static void main(String[] args) throws Exception { if (args.length != 2) { System.out.println( "Usage: java -classpath <classpath> [-Dorg.apache.commons."+ "logging.simplelog.defaultlog=<loglevel>]" + " PostXML <url> <filename>]"); System.out.println("<classpath> - must contain the "+ "commons-httpclient.jar and commons-logging.jar"); System.out.println("<loglevel> - one of error, "+ "warn, info, debug, trace"); System.out.println("<url> - the URL to post the file to"); System.out.println("<filename> - file to post to the URL"); System.out.println(); System.exit(1); } // Get target URL String strURL = args[0]; // Get file to be posted String strXMLFilename = args[1]; File input = new File(strXMLFilename); // Prepare HTTP post PostMethod post = new PostMethod(strURL); // Request content will be retrieved directly // from the input stream // Per default, the request content needs to be buffered // in order to determine its length. // Request body buffering can be avoided when // content length is explicitly specified post.setRequestEntity(new InputStreamRequestEntity( new FileInputStream(input), input.length())); // Specify content type and encoding // If content encoding is not explicitly specified // ISO-8859-1 is assumed post.setRequestHeader( "Content-type", "text/xml; charset=ISO-8859-1"); // Get HTTP client HttpClient httpclient = new HttpClient(); // Execute request try { int result = httpclient.executeMethod(post); // Display status code System.out.println("Response status code: " + result); // Display response System.out.println("Response body: "); System.out.println(post.getResponseBodyAsString()); } finally { // Release current connection to the connection pool // once you are done post.releaseConnection(); } } }

    Read the article

  • Database file is inexplicably locked during SQLite commit

    - by sweeney
    Hello, I'm performing a large number of INSERTS to a SQLite database. I'm using just one thread. I batch the writes to improve performance and have a bit of security in case of a crash. Basically I cache up a bunch of data in memory and then when I deem appropriate, I loop over all of that data and perform the INSERTS. The code for this is shown below: public void Commit() { using (SQLiteConnection conn = new SQLiteConnection(this.connString)) { conn.Open(); using (SQLiteTransaction trans = conn.BeginTransaction()) { using (SQLiteCommand command = conn.CreateCommand()) { command.CommandText = "INSERT OR IGNORE INTO [MY_TABLE] (col1, col2) VALUES (?,?)"; command.Parameters.Add(this.col1Param); command.Parameters.Add(this.col2Param); foreach (Data o in this.dataTemp) { this.col1Param.Value = o.Col1Prop; this. col2Param.Value = o.Col2Prop; command.ExecuteNonQuery(); } } this.TryHandleCommit(trans); } conn.Close(); } } I now employ the following gimmick to get the thing to eventually work: private void TryHandleCommit(SQLiteTransaction trans) { try { trans.Commit(); } catch (Exception e) { Console.WriteLine("Trying again..."); this.TryHandleCommit(trans); } } I create my DB like so: public DataBase(String path) { //build connection string SQLiteConnectionStringBuilder connString = new SQLiteConnectionStringBuilder(); connString.DataSource = path; connString.Version = 3; connString.DefaultTimeout = 5; connString.JournalMode = SQLiteJournalModeEnum.Persist; connString.UseUTF16Encoding = true; using (connection = new SQLiteConnection(connString.ToString())) { //check for existence of db FileInfo f = new FileInfo(path); if (!f.Exists) //build new blank db { SQLiteConnection.CreateFile(path); connection.Open(); using (SQLiteTransaction trans = connection.BeginTransaction()) { using (SQLiteCommand command = connection.CreateCommand()) { command.CommandText = DataBase.CREATE_MATCHES; command.ExecuteNonQuery(); command.CommandText = DataBase.CREATE_STRING_DATA; command.ExecuteNonQuery(); //TODO add logging } trans.Commit(); } connection.Close(); } } } I then export the connection string and use it to obtain new connections in different parts of the program. At seemingly random intervals, though at far too great a rate to ignore or otherwise workaround this problem, I get unhandled SQLiteException: Database file is locked. This occurs when I attempt to commit the transaction. No errors seem to occur prior to then. This does not always happen. Sometimes the whole thing runs without a hitch. No reads are being performed on these files before the commits finish. I have the very latest SQLite binary. I'm compiling for .NET 2.0. I'm using VS 2008. The db is a local file. All of this activity is encapsulated within one thread / process. Virus protection is off (though I think that was only relevant if you were connecting over a network?). As per Scotsman's post I have implemented the following changes: Journal Mode set to Persist DB files stored in C:\Docs + Settings\ApplicationData via System.Windows.Forms.Application.AppData windows call No inner exception Witnessed on two distinct machines (albeit very similar hardware and software) Have been running Process Monitor - no extraneous processes are attaching themselves to the DB files - the problem is definitely in my code... Does anyone have any idea whats going on here? I know I just dropped a whole mess of code, but I've been trying to figure this out for way too long. My thanks to anyone who makes it to the end of this question! brian UPDATES: Thanks for the suggestions so far! I've implemented many of the suggested changes. I feel that we are getting closer to the answer...however... The code above technically works however it is non-deterministic! It is not guaranteed to do anything aside from spin in neutral forever. In practice it seems to work somewhere between the 1st and 10th iteration. If i batch my commits at a reasonable interval damage will be mitigated but I really do not want to leave things in this state... More suggestions welcome!

    Read the article

< Previous Page | 57 58 59 60 61 62 63  | Next Page >