Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 61/123 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • missing files after reassemble of RAID-5

    - by Kris_R
    I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

    Read the article

  • Can't install windows 7

    - by Doug
    I recently formatted my Acer Aspire 4730z and attempted to install Windows 7. I have tried more than 5 times with no avail. Currently, I am doing a clean install by booting it from the DVD. I have the SATA set to IDE. When it restarts after the installation to complete the installation, it goes to a black screen and stops moving. It's been 10 minutes now.

    Read the article

  • Low framerate on background apps

    - by user1698923
    My problem is that when a game is running in the foreground, in Full Screen mode, any applications on my second monitor (such as youtube videos, videos, not app specific) drop their frame-rate to about 2-3 FPS. It seems like some sort of power management option that I can't track down. As far as I can tell, it's not due to the GPU not being able to keep up. For instance, my PC can play League of Legends at about 280FPS when the framerate is uncapped. If i cap it at 60FPS using the in-game option, it has no affect on the performance of the background app. Summary Operating System Windows 8 Pro 64-bit CPU Intel Core i7 3820 @ 3.60GHz 42 °C Sandy Bridge-E 32nm Technology RAM 12.0GB Triple-Channel DDR3 @ 533MHz (7-7-7-20) Motherboard Gigabyte Technology Co., Ltd. X79-UD3 (SOCKET 0) 37 °C Graphics DELL U2713HM (2560x1440@59Hz) DELL U2713HM (2560x1440@59Hz) 1280MB NVIDIA GeForce GTX 570 (Gigabyte) 58 °C Hard Drives 212GB Volume0 (RAID) 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 36 °C 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 34 °C Optical Drives No optical disk drives detected Audio ASUS Xonar Essence STX Audio Device Operating System Windows 8 Pro 64-bit Computer type: Desktop Graphics Monitor 1 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Secondary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY4\Monitor0 Monitor 2 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Primary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY5\Monitor0 NVIDIA GeForce GTX 570 Manufacturer NVIDIA Model GeForce GTX 570 GPU GF110 Device ID 10DE-1086 Revision A2 Subvendor Gigabyte (1458) Series GeForce GTX 500 Current Performance Level Level 3 Current GPU Clock 845 MHz Current Memory Clock 1900 MHz Current Shader Clock 1690 MHz Voltage 0.988 V Technology 40 nm Die Size 520 mm² Release Date Dec 07, 2010 DirectX Support 11.0 OpenGL Support 5.0 Bus Interface PCI Express x16 Temperature 57 °C Driver version 9.18.13.2018 BIOS Version 70.10.55.00.01 ROPs 40 Shaders 512 unified Memory Type GDDR5 Memory 1280 MB Bus Width 64x5 (320 bit) Filtering Modes 16x Anisotropic Noise Level Moderate Max Power Draw 219 Watts Count of performance levels : 3 Level 1 - "Default" GPU Clock 50 MHz Memory Clock 135 MHz Shader Clock 101 MHz Level 2 - "2D Desktop" GPU Clock 405 MHz Memory Clock 324 MHz Shader Clock 810 MHz Level 3 - "3D Applications" GPU Clock 845 MHz Memory Clock 1900 MHz Shader Clock 1690 MHz Things I've tried: 1) Updating the graphics driver 2) Setting windows power mode to High Performance 3) Reset Nvidia Global Performance settings to default

    Read the article

  • Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

    - by h4xnoodle
    I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

    Read the article

  • Linux Mint 14 severe overheating

    - by agvares
    I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

    Read the article

  • If a raid controller changes, are the drives still usable without re-formatting?

    - by Jeremy
    I've been wanting to do a raid 1 setup in my home with a pair of sata drives. Someone told me that if the controller fails, you can't just get a new controller because you'll have to reformat the drives. Or is that true only in some implementations? I was originally just looking at an onboard raid controller, or an entry level nas drvice like the intel SS4200-E, but If the hardware (controller) ever fails, will I be out of luck accessing the data if I can't get the exact same hardware to replace it?

    Read the article

  • What iowait values are ok?

    - by alfish
    I am trying to find the bottleneck of a server running a fairly busy php/mysql site. My first culprit was io but iostat shows that on average iowait consumes only %3.60 of cpu time. here is the complete result of issuing iostat: avg-cpu: %user %nice %system %iowait %steal %idle 65.78 0.00 8.52 3.60 0.00 22.10 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 42.36 138.28 1754.70 408630278 5185216128 So I am wondering if the iowait is within acceptable range, and if not, whether switching from SATA to SSD would dramatically reduce it?

    Read the article

  • How to upgrade the hard drive in a MacBook Pro?

    - by John McC
    I have a MacBook Pro with Snow Leopard that I want to upgrade to a new larger hard drive. I also have a current Time Machine backup on an external USB drive and an external SATA case I that I can put a 2.5" drive in. What's the best procedure for transferring the existing installation to the new drive?

    Read the article

  • Acer AM1100 stuck on Verify DMI Pool Data

    - by r0ca
    I have an Acer AM1100 and I just installed Windows 7 Ultimate. Windows has properly installed but right now, when I boot up the system, I get stuck on "Verify DMI Pool Data". I also tried to reinstalled the whole thing but this happens again... Any takers? It's an Acer AM1100 Athlon x2 2go Ram Sata HDD 320go

    Read the article

  • fdisk (linux) partitioning raid0

    - by Silverrocker
    I'm trying to create partitions for a slackware instalation on my computer (beside Windows 7) just to have a nice distro running mostly for school but when I run fdisk and print the partitiontable I get the following message: Partition x does not end on cylinder boundary. (in my case x = 1, just using x to help googlers). I must say I'm using a raid card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without loosing any data?

    Read the article

  • Run VISTA disk check without reboot

    - by Chau
    I want to perform a surface scan on my harddisks (S-ATA, P-ATA, USB and E-SATA) in windows VISTA. Is it possible to do this without scheduling the scan on next reboot? It takes a lot of time and I would like to be able to use the computer during the scan. I can accept that this might not be possible on the window partition disk, but I cannot see why it shouldn't be possible on other disks.

    Read the article

  • linux: automount internal hard drive during boot?

    - by John Doe
    i try to create my own NAS and i need to automount the internal sata disks during boot i know i could do using fstab but im searching for a more easy/generalized way so its easier to scale with less handwork needed for every hard drive attached (or every mainboard added to the cluster) so anyone knows how to automount internal disks without using fstab like ubuntu does for usb drives? im using ubuntu server 9.10 thx all

    Read the article

  • fdisk (Linux) partitioning RAID 0

    - by Silverrocker
    I'm trying to create partitions for a Slackware installation on my computer (beside Windows 7) just to have a nice distribution running mostly for school but when I run fdisk and print the partition table I get the following message: Partition x does not end on cylinder boundary. (In my case x = 1, just using x to help googlers.) I must say I'm using a RAID card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without losing any data?

    Read the article

  • Rocketfish Driver

    - by darthg8r
    I've got a RocketFish SATA enclosure, model number RF-AHD35. It has a card reader on it. Windows doesn't see the card reader. I figure it's a driver problem. But, I don't have the CD that came with it anymore, nor is it available from their site. As a matter of fact, their site looks like my 8 year old made it. Does anyone have access to this driver?

    Read the article

  • Hypervisor load on local disks

    - by Chris
    Hi, What is the I/O load on the local disk system for the host OS in XenServer ? I can't find this info anywhere. As we have a SAN for the VMs themselves, can we get away with cheap controller / SATA disk in raid-1 for the hypervisor ? We won't boot from the SAN as it seems prone to problems. Thanks, Chris

    Read the article

  • Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

    - by Leon
    I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

    Read the article

  • How decode xfs lost+found directory

    - by Satpal
    I have managed to trash my homebrew Nas box (an old hp d530 + 2x 750gb sata soft raid1 + 17gb boot disk with ubuntu server 8.10) I have searched the web and tried to repair the file system but to no avail :( I was thinking that the dirs/files located under the root of the lost+found directory are 64 bit numbers. Is there any way that I could decant the number into binary form, from there reconstruct the directory/file structure. More to the point can anyone point to the information on how xfs inodes are broken down(does that make sense)?

    Read the article

  • Palit GeForce 8800GT 512MB Minimum Power Requirement?

    - by Wesley
    Hi all, I am building a system for a friend. The potential specs are like this so far: ASUS A8N-VM motherboard AMD Athlon 64 3200+ @ 2.0 GHz Any 7200RPM SATA HDD Palit GeForce 8800GT 512MB GDDR3 PCIe One DVD/CD combo drive Creative SB Live! 5.1 sound card I was wondering what wattage of power supply would be able to support this hardware. I had a 350W in mind... would that do? Thanks in advance.

    Read the article

  • Boot problem: weird sound...

    - by Wesley
    Here are the specs to put things into context: ECS P4M800PRO-M478 (V1.0) Intel P4 "Northwood" 2.8C GHz (HT) Socket 478 2x 512 MB PC2-4200 DDR2-533 RAM Visiontek Radeon HD 3650 512 MB DDR2 AGP Maxtor 120 GB SATA HDD The Best Power 500 W ATX PSU Anyways, it's not booting Windows XP SP3 properly. Specifically, there is a sound when it fails to boot and the computer automatically restarts. You can listen to the sound here. What could be the problem?

    Read the article

  • Can a 300W power supply support two additional hard drives?

    - by Josh
    I am thinking of purchasing the Dell I580-5108NBC, but I want to add 2 1TB SATA drives in a RAID5 config. The system only has a 300W power supply, and already has a 1TB drive and a DVD burner. Is the 300W power supply sufficient to support two additional drives, or should I upgrade it? Or, can I simply unplug the DVD burner?

    Read the article

  • Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?

    - by Josh
    I have a dual core Intel i5 Ubuntu Server 10.04 LTS system running kernel 2.6.32-22-server #33-Ubuntu SMP with three 1TB SATA hard drives set up in a RAID5 array using linux md devices. I have read about the RAID5 write hole and am concerned: if my linux system locks up or kernel panics, should I be assume that the integrety of my data has been compromised and restore from backup? How can I know if the data on the RAID5 array is "safe"?

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >