Search Results

Search found 6337 results on 254 pages for 'tips tricks'.

Page 61/254 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Boost Netbook Speed with an SD Card & ReadyBoost

    - by Matthew Guay
    Looking for a way to increase the performance of your netbook?  Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less.  Even if you want to add more ram, often they can only be upgraded to a max of 2GB.  With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory.  If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note:  ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds.  Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer.  Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this.  Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer.  It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before.  This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used.  Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive.  You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier.  Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit.  We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less.  SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

    Read the article

  • Clone a Hard Drive Using an Ubuntu Live CD

    - by Trevor Bekolay
    Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

    Read the article

  • Use Any Folder For Your Ubuntu Desktop (Even a Dropbox Folder)

    - by Trevor Bekolay
    By default, Ubuntu creates a folder called Desktop in your home directory that gets displayed on your desktop. What if you want to use something else, like your Dropbox folder? Here we look at how to use any folder for your desktop. Not only can you change your desktop folder, you can change the location of any other folder Ubuntu creates for you in your home folder, like Documents or Music – and this works in any Linux distribution using the Gnome desktop manager. In this example, we’re going to change desktop to show our Dropbox folder. Open your home folder in a File Browser by clicking on Places > Home Folder. In the Home Folder, open the .config folder. By default, .config is hidden, so you may have to show hidden folders (temporarily) by clicking on View > Show Hidden Files. Then open the .config folder by double-clicking on it. Now open the user-dirs.dirs file… If double-clicking on it does not open it in a text editor, right-click on it and choose Open with Other Application… and find a text editor like Gedit. Change the entry associated with XDG_DESKTOP_DIR to the folder you want to be shown as your desktop. In our case, this is $HOME/Dropbox. Note: The “~” shortcut for the home directory won’t work in this file (use $HOME for that), but an absolute path (i.e. a path starting with “/”) will work. Feel free to change the locations of the other folders as well. Save and close user-dirs.dirs. At this point you can either log off and then log back on to get your desktop back, or open a terminal window Applications > Accessories > Terminal and enter: killall nautilus Nautilus (the file manager in Gnome) will restart itself and display your newly chosen folder as the desktop! This is a cool trick to use any folder for your Ubuntu desktop. What did you use as your desktop folder? Let us know in the comments! Similar Articles Productive Geek Tips Sync Your Pidgin Profile Across Multiple PCs with DropboxAdd "My Dropbox" to Your Windows 7 Start MenuCreate a Keyboard Shortcut to Access Hidden Desktop Icons and FilesAdd "My Computer" to Your Windows 7 / Vista TaskbarCheck your Disk Usage on Ubuntu with Disk Usage Analyzer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative

    Read the article

  • Remove Ubuntu or XP from the Windows 7 Boot Menu

    - by Trevor Bekolay
    If you’ve ever used a dual-boot system and then removed one of the operating systems, it can still show up in Windows 7’s boot menu. We’ll show you how to get rid of old entries and speed up the boot process. To edit the boot menu, we will use a program called bcdedit that’s included with Windows 7. There are some third-party graphical applications that will edit the menu, but we prefer to use built-in applications when we can. First, we need to open a command prompt with Administrator privileges. Open the start menu and type cmd into the search box. Right click on the cmd program that shows up, and select Run as administrator. Alternatively, if you’ve disabled the search box, you can find the command prompt in All Programs > Accessories. In the command prompt, type in bcdedit and press enter. A list of the boot menu entries will appear. Find the entry that you would like to delete – in our case, this is the last one, with the description of “Ubuntu”. What we need is the long sequence of characters marked as the identifier. Rather than type it out, we will copy it to be pasted later. Right-click somewhere in the command prompt window and select Mark. By clicking the left mouse button and dragging over the appropriate text, select the identifier for the entry you want to delete, including the left and right curly braces on either end. Press the Enter button. This will copy the text to the clipboard. In the command prompt, type in: bcdedit /delete and then right-click somewhere in the command prompt window and select Paste. Press Enter to input the now completed command. The boot menu entry will now be deleted. Type in bcdedit again to confirm that the offending entry is now gone from the list. If you reboot your machine now, you will notice that the boot menu does not even come up, because there is only one entry in the list (unless you had more than two entries to begin with). You’ve shaved a few seconds off of the boot process! Not to mention the added effort of pressing the enter button. There’s a lot more that you can do with bcdedit, like change the description of boot menu entries, create new entries, and much more. For a list of what you can do with bcdedit, type the following into the Command Window. bcdedit /help While there are third-party GUI solutions for accomplishing the same thing, using this method will save you time by not having to go through the extra steps of installing an extra program. Similar Articles Productive Geek Tips Reinstall Ubuntu Grub Bootloader After Windows Wipes it OutClean Up Ubuntu Grub Boot Menu After UpgradesHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting UbuntuChange the GRUB Menu Timeout on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

    Read the article

  • Tips/tricks/gotchas for using System.Diagnostics.Process and Process.Start

    - by puffpio
    I've used Process.Start to shell out and call 7zip to archive stuff I've also used it to call ffmpeg to compress video files. That was a while ago..but I rememeber there was some issue about the pcocess stalling if you don't read off the standardoutput/error. I don't remember everything about it. Does anyone have experience using System.Diagnostics.Process for the purposes of initiating a long running process and waiting for it to finish? Thanks

    Read the article

  • Language Tricks to Shorten My Java Code?

    - by yar
    I am currently rediscovering Java (working with Ruby a lot recently), and I love the compilation-time checking of everything. It makes refactoring so easy. However, I miss playing fast-and-loose with types to do an each loop. This is my worst code. Is this as short as it can be? I have a collection called looperTracks, which has instances that implement Looper. I don't want to modify that collection, but I want to iterate through its members PLUS the this (which also implements Looper). List<Looper> allLoopers = new ArrayList<Looper>(looperTracks.length + 1); for (LooperTrack track : looperTracks) { allLoopers.add(track); } allLoopers.add(this); for (Looper looper : allLoopers) { // Finally! I have a looper I'm particularly concerned about any features that are new to Java from 1.5 on that I may have missed. For this question I am not asking about JRuby nor Groovy, though I know that they would work for this. Edit: Sorry (too much Ruby!)... looperTracks is of type LooperTrack[] and LooperTrack implements Looper.

    Read the article

  • Performance Tricks for C# Logging

    - by Charles
    I am looking into C# logging and I do not want my log messages to spend any time processing if the message is below the logging threshold. The best I can see log4net does is a threshold check AFTER evaluating the log parameters. Example: _logger.Debug( "My complicated log message " + thisFunctionTakesALongTime() + " will take a long time" ) Even if the threshold is above Debug, thisFunctionTakesALongTime will still be evaluated. In log4net you are supposed to use _logger.isDebugEnabled so you end up with if( _logger.isDebugEnabled ) _logger.Debug( "Much faster" ) I want to know if there is a better solution for .net logging that does not involve a check each time I want to log. In C++ I am allowed to do LOG_DEBUG( "My complicated log message " + thisFunctionTakesALongTime() + " will take no time" ) since my LOG_DEBUG macro does the log level check itself. This frees me to have a 1 line log message throughout my app which I greatly prefer. Anyone know of a way to replicate this behavior in C#?

    Read the article

  • .Net4 ConcurrentDictionary: Tips & Tricks

    - by SDReyes
    Hi guys, I started to use the new ConcurrentDictionary from .Net4 yesterday to implement a simple caching for a threading project. But I'm wondering what I have to take care of/be careful about when using it? What have been your experiences using it?

    Read the article

  • wonder about some #define tricks

    - by kingkai
    Whlie reading codes of my group project, I come across many DEFINEs, and some of them seems strange. To generalize it, please look at the following 2 examples. Example 1: #define SNPRINTF(dst, fmt, arg...) snprintf(dst, sizeof(dst), fmt, ##arg) what does "##" means in this circumstance? I've tried to delete both of them, and write codes like "char buf[1024]; SNPRINTF(buf,"%s,%s","abcd","efg");" which produced the same result. So "##" seems no use and no harm to me. Example 2: #define CLOSE(fd) do { \ if (-1 != (fd)) { \ close(fd); \ (fd) = -1; \ } \ } while (0) Necessary to stuff the inner code to the do{}while(0) statement? what's the use? Thanks!

    Read the article

  • Php string handling tricks

    - by Dam
    Hi my question Need to get the 10 word before and 10 words after for the given text . i mean need to start the 10 words before the keyword and end with 10 word after the key word. Given text : "Twenty-three" The main trick : content having some html tags etc .. tags need to keep that tag with this content only . need to display the words from 10before - 10after content is bellow : removed Thank you

    Read the article

  • Help with link tricks

    - by Colre
    I have a php script that accepts one single query: ie., name=micheal. For now I query it over the net like so: www.mydomain.net/mysript.php?name=micheal. But I do want to query it like this: www.mydomain.net/micheal. Unfortunately, I do not know how to do that. Would you please help me out?

    Read the article

  • CSS - image overflow tricks

    - by rnk
    I'm stucking with some design techniques where I want to make image item box like this Where the actual image can be upto maximum height of 300px and width of 225px. The width and height of the item box including the image and the text is 190px x 190px I'm using this image http://farm8.staticflickr.com/7122/7424355198_72620895bd_m.jpg I tried using overflow: hidden for the image item to hide it's height below to show the image text. But I'm getting only like this http://jsfiddle.net/Dkh4q/ Could anyone tell the mistake I've done? Thanks! UPDATE For more information about the expected result, if you can login to zerply, then please check this http://zerply.com/christievdc/portfolio for example.

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

  • Change the User Interface Language in Ubuntu

    - by Matthew Guay
    Would you like to use your Ubuntu computer in another language?  Here’s how you can easily change your interface language in Ubuntu. Ubuntu’s default install only includes a couple languages, but it makes it easy to find and add a new interface language to your computer.  To get started, open the System menu, select Administration, and then click Language Support. Ubuntu may ask if you want to update or add components to your current default language when you first open the dialog.  Click Install to go ahead and install the additional components, or you can click Remind Me Later to wait as these will be installed automatically when you add a new language. Now we’re ready to find and add an interface language to Ubuntu.  Click Install / Remove Languages to add the language you want. Find the language you want in the list, and click the check box to install it.  Ubuntu will show you all the components it will install for the language; this often includes spellchecking files for OpenOffice as well.  Once you’ve made your selection, click Apply Changes to install your new language.  Make sure you’re connected to the internet, as Ubuntu will have to download the additional components you’ve selected. Enter your system password when prompted, and then Ubuntu will download the needed languages files and install them.   Back in the main Language & Text dialog, we’re now ready to set our new language as default.  Find your new language in the list, and then click and drag it to the top of the list. Notice that Thai is the first language listed, and English is the second.  This will make Thai the default language for menus and windows in this account.  The tooltip reminds us that this setting does not effect system settings like currency or date formats. To change these, select the Text Tab and pick your new language from the drop-down menu.  You can preview the changes in the bottom Example box. The changes we just made will only affect this user account; the login screen and startup will not be affected.  If you wish to change the language in the startup and login screens also, click Apply System-Wide in both dialogs.  Other user accounts will still retain their original language settings; if you wish to change them, you must do it from those accounts. Once you have your new language settings all set, you’ll need to log out of your account and log back in to see your new interface language.  When you re-login, Ubuntu may ask you if you want to update your user folders’ names to your new language.  For example, here Ubuntu is asking if we want to change our folders to their Thai equivalents.  If you wish to do so, click Update or its equivalents in your language. Now your interface will be almost completely translated into your new language.  As you can see here, applications with generic names are translated to Thai but ones with specific names like Shutter keep their original name. Even the help dialogs are translated, which makes it easy for users around to world to get started with Ubuntu.  Once again, you may notice some things that are still in English, but almost everything is translated. Adding a new interface language doesn’t add the new language to your keyboard, so you’ll still need to set that up.  Check out our article on adding languages to your keyboard to get this setup. If you wish to revert to your original language or switch to another new language, simply repeat the above steps, this time dragging your original or new language to the top instead of the one you chose previously. Conclusion Ubuntu has a large number of supported interface languages to make it user-friendly to people around the globe.  And since you can set the language for each user account, it’s easy for multi-lingual individuals to share the same computer. Or, if you’re using Windows, check out our article on how you can Change the User Interface Language in Vista or Windows 7, too! Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyChange the User Interface Language in Vista or Windows 7Create a Samba User on UbuntuInstall Samba Server on UbuntuSee Which Groups Your Linux User Belongs To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

    Read the article

  • Diagnose PC Hardware Problems with an Ubuntu Live CD

    - by Trevor Bekolay
    So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

    Read the article

  • How To Replace Notepad in Windows 7

    - by Trevor Bekolay
    It used to be that Notepad was a necessary evil because it started up quickly and let us catch a quick glimpse of plain text files. Now, there are a bevy of capable Notepad replacements that are just as fast, but also have great feature sets. Before following the rest of this how-to, ensure that you’re logged into an account with Administrator access. Note: The following instructions involve modifying some Windows system folders. Don’t mess anything up while you’re in there! If you follow our instructions closely, you’ll be fine. Choose your replacement There are a ton of great Notepad replacements, including Notepad2, Metapad, and Notepad++. The best one for you will depend on what types of text files you open and what you do with them. We’re going to use Notepad++ in this how-to. The first step is to find the executable file that you’ll replace Notepad with. Usually this will be the only file with the .exe file extension in the folder where you installed your text editor. Copy the executable file to your desktop and try to open it, to make sure that it works when opened from a different folder. In the Notepad++ case, a special little .exe file is available for the explicit purpose of replacing Notepad.If we run it from the desktop, it opens up Notepad++ in all its glory. Back up Notepad You will probably never go back once you switch, but you never know. You can backup Notepad to a special location if you’d like, but we find it’s easiest to just keep a backed up copy of Notepad in the folders it was originally located. In Windows 7, Notepad resides in: C:\Windows C:\Windows\System32 C:\Windows\SysWOW64 in 64-bit versions only Navigate to each of those directories and copy Notepad. Paste it into the same folder. If prompted, choose to Copy, but keep both files. You can keep your backup as “notepad (2).exe”, but we prefer to rename it to “notepad.exe.bak”. Do this for all of the folders that have Notepad (2 total for 32-bit Windows 7, 3 total for 64-bit). Take control of Notepad and delete it Even if you’re on an administrator account, you can’t just delete Notepad – Microsoft has made some security gains in this respect. Fortunately for us, it’s still possible to take control of a file and delete it without resorting to nasty hacks like disabling UAC. Navigate to one of the directories that contain Notepad. Right-click on it and select Properties.   Switch to the Security tab, then click on the Advanced button. Note that the owner of the file is a user called “TrustedInstaller”. You can’t do much with files owned by TrustedInstaller, so let’s take control of it. Click the Edit… button. Select the desired owner (you could choose your own account, but we’re going to give any Administrator control) and click OK. You’ll get a message that you need to close and reopen the Properties windows to edit permissions. Before doing that, confirm that the owner has changed to what you selected. Click OK, then OK again to close the Properties window. Right-click on Notepad and click on Properties again. Switch to the Security tab. Click on Edit…. Select the appropriate group or user name in the list at the top, then add a checkmark in the checkbox beside Full control in the Allow column. Click OK, then Yes to the dialog box that pops up. Click OK again to close the Properties window. Now you can delete Notepad, by either selecting it and pressing Delete on the keyboard, or right-click on it and click Delete.   You’re now free from Notepad’s foul clutches! Repeat this procedure for the remaining folders (or folder, on 32-bit Windows 7). Drop in your replacement Copy your Notepad replacement’s executable, which should still be on your desktop. Browse to the two or three folders listed above and copy your .exe to those locations. If prompted for Administrator permission, click Continue. If your executable file was named something other than “notepad.exe”, rename it to “notepad.exe”. Don’t be alarmed if the thumbnail still shows the old Notepad icon. Double click on Notepad and your replacement should open. To make doubly sure that it works, press Win+R to bring up the Run dialog box and enter “notepad” into the text field. Press enter or click OK. Now you can allow Windows to open files with Notepad by default with little to no shame! All without restarting or having to disable UAC! Similar Articles Productive Geek Tips Search and Replace Specific Formatting (fonts, styles,etc) in Microsoft WordHow to Drag Files to the Taskbar to Open Them in Windows 7Customize the Windows 7 or Vista Send To MenuKill Processes from the Windows Command LineChange Your Windows 7 Library Icons the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

    Read the article

  • Clean Up the New Ubuntu Grub2 Boot Menu

    - by Trevor Bekolay
    Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

    Read the article

  • Make a Drive Image Using an Ubuntu Live CD

    - by Trevor Bekolay
    Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

    Read the article

  • Prevent Changing the Screen Saver and Wallpaper in Windows 7

    - by Mysticgeek
    Sometimes you might not want users to have the ability to change Screen Savers and Wallpaper on Windows 7 workstations. Today we look at how to prevent them from changing either one or both. You might administer computers in your home or small office and find it annoying when users continuously change the wallpaper and Screen Savers to something obnoxious. A lot of times they might be inexperienced users and download these so-called “wonderful and free” Screen Saver/Wallpaper packages from shady sites that include loads of Spyware. Preventing users from changing them is another helpful tool to avoid wasteful time spent switching things back. Prevent Changing Screensavers & Wallpaper Using Group Policy Editor  Note: This method uses Group Policy which is not available in Home versions on Windows 7. Open the Start Menu and enter gpedit.msc into the Search box and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates \ Control Panel \ Personalization. Then in the right column double-click on Prevent changing desktop background. Now check the radio button next to Enabled, then click OK. Back on the Group Policy Screen, double-click on Prevent changing screen saver. In the next screen select the radio button next to Enable, click OK, then close out of Group Policy Editor. Now when a user goes into the Personalization section, the Desktop Background hyperlink is now grayed out and inactive. Notice the message One or more of the settings on this page has been disabled by the system administrator at the bottom of the section. If they click to change the Screen Saver, an error message will pop up letting them know the function is disabled. Prevent Changing Screensavers & Wallpaper Using a Registry Hack You can also make a couple Registry changes to prevent users from changing the Wallpaper & Screen Saver…which will work on Home versions of Windows 7. Before making any Registry changes make sure you back it up first. Open the Registry by typing regedit into the Search box in the Start menu and hit Enter. First we’ll start with the Wallpaper. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System and create a new String Value and name it Wallpaper. Then modify the Value data to point to the location of the Wallpaper you want it to always be. Where in this example it’s our main wallpaper on our local drive…then click OK. Now let’s make sure they can’t change the Screen Saver. In the same Registry location, we need to make a new DWORD (32-bit) Value. Give it the Value name of NoDispScrSavPage and the value data of “1” and click OK. Close out of the Registry and restart the machine or simply log off then back on again for the changes to take effect. Results For the Wallpapers, a user can still go in and see the selections, however if they try to change it to something else… It will just go back to the Personalization screen and no changes will be made, as we set the value to only be the background we specified. If the user tries to make a change to the Screen Saver, the hyperlink will be grayed out and inactive, and the message One or more of the settings on this page has been disabled by the system administrator will be displayed at the bottom of the section. Conclusion If you’re tired of users changing the Wallpaper and Screen Saver, and want another way to help avoid Malware, locking down these settings can help a lot. Again, before making any changes to the Registry, make sure to back it up. These settings should work in Vista and XP as well. Similar Articles Productive Geek Tips Save 1-4% More Battery Life With Windows Vista Battery SaverCustomize Your Windows Vista Logon ScreenEnable "Ubuntu Style" Logons in Windows VistaManage the Delete Confirmation Dialog box in Windows 7Dual Monitors: Use a Different Wallpaper on Each Desktop TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Use Drive Mirroring for Instant Backup in Windows 7

    - by Trevor Bekolay
    Even with the best backup solution, a hard drive crash means you’ll lose a few hours of work. By enabling drive mirroring in Windows 7, you’ll always have an up-to-date copy of your data. Windows 7’s mirroring – which is only available in Professional, Enterprise, and Ultimate editions – is a software implementation of RAID 1, which means that two or more disks are holding the exact same data. The files are constantly kept in sync, so that if one of the disks fails, you won’t lose any data. Note that mirroring is not technically a backup solution, because if you accidentally delete a file, it’s gone from both hard disks (though you may be able to recover the file). As an additional caveat, having mirrored disks requires changing them to “dynamic disks,” which can only be read within modern versions of Windows (you may have problems working with a dynamic disk in other operating systems or in older versions of Windows). See this Wikipedia page for more information. You will need at least one empty disk to set up disk mirroring. We’ll show you how to mirror an existing disk (of equal or lesser size) without losing any data on the mirrored drive, and how to set up two empty disks as mirrored copies from the get-go. Mirroring an Existing Drive Click on the start button and type partitions in the search box. Click on the Create and format hard disk partitions entry that shows up. Alternatively, if you’ve disabled the search box, press Win+R to open the Run window and type in: diskmgmt.msc The Disk Management window will appear. We’ve got a small disk, labeled OldData, that we want to mirror in a second disk of the same size. Note: The disk that you will use to mirror the existing disk must be unallocated. If it is not, then right-click on it and select Delete Volume… to mark it as unallocated. This will destroy any data on that drive. Right-click on the existing disk that you want to mirror. Select Add Mirror…. Select the disk that you want to use to mirror the existing disk’s data and press Add Mirror. You will be warned that this process will change the existing disk from basic to dynamic. Note that this process will not delete any data on the disk! The new disk will be marked as a mirror, and it will starting copying data from the existing drive to the new one. Eventually the drives will be synced up (it can take a while), and any data added to the E: drive will exist on both physical hard drives. Setting Up Two New Drives as Mirrored If you have two new equal-sized drives, you can format them to be mirrored copies of each other from the get-go. Open the Disk Management window as described above. Make sure that the drives are unallocated. If they’re not, and you don’t need the data on either of them, right-click and select Delete volume…. Right-click on one of the unallocated drives and select New Mirrored Volume…. A wizard will pop up. Click Next. Click on the drives you want to hold the mirrored data and click Add. Note that you can add any number of drives. Click Next. Assign it a drive letter that makes sense, and then click Next. You’re limited to using the NTFS file system for mirrored drives, so enter a volume label, enable compression if you want, and then click Next. Click Finish to start formatting the drives. You will be warned that the new drives will be converted to dynamic disks. And that’s it! You now have two mirrored drives. Any files added to E: will reside on both physical disks, in case something happens to one of them. Conclusion While the switch from basic to dynamic disks can be a problem for people who dual-boot into another operating system, setting up drive mirroring is an easy way to make sure that your data can be recovered in case of a hard drive crash. Of course, even with drive mirroring, we advocate regular backups to external drives or online backup services. Similar Articles Productive Geek Tips Rebit Backup Software [Review]Disabling Instant Search in Outlook 2007Restore Files from Backups on Windows Home ServerSecond Copy 7 [Review]Backup Windows Home Server Folders to an External Hard Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

    Read the article

  • 6 Ways to Speed Up Your Ubuntu PC

    - by Chris Hoffman
    Ubuntu is pretty snappy out-of-the-box, but there are some ways to take better advantage of your system’s memory and speed up the boot process. Some of these tips can really speed things up, especially on older hardware. In particular, selecting a lightweight desktop environment and lighter applications can give an older system a new lease on life. That old computer that struggles with Ubuntu’s Unity desktop can provide decent performance for years to come. HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >