Search Results

Search found 2181 results on 88 pages for 'wifi cordon'.

Page 61/88 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Reputable TabletPC vendors

  - by snorfys

  I'm developing software for tablet pcs and so far I've used some lenovo's (x41), some toshiba's (portege m200) and some gateways (M275). Granted: the machines we've gotten have predominantly been refurbs, but they're failing 80-90% of the time. Part of the reason that they're failing is users inevitably dropping them, so I'm looking at potentially some rugged tablet pcs. The problem that I'm running into is that Current tablet pcs are high spec (much higher than I'm looking for at least) The rugged tablet manufacturer space seems to be filled with lots of small companies that I don't trust yet. I'm looking for tablet PCs (keyboard or no) that can support: XP tpc (optional win 7) single core 1.5-2ghz 1gb ram wifi optional gsm optional gps very optional vehicle docking solutions The budget I've got is tight (but slightly flexible - So are there any reputable tablet pc vendors out there that can do this.

  Read the article

• How to permanently add wireless interfaces with iw

  - by walli

  How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by AndreaTrasatti

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• TP-Link TL-WA701N not working good as wireless extender

  - by djechelon

  I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

  Read the article

• how to program a special key on my laptop?

  - by daniel11

  ok so i have a set of touch screen buttons on the top of my laptop's keyboard, (one turns on power save mode, one disables/enables the mouse touch pad, one toggles the wifi adapter, and two turns the volume up/down) however theres another one that opened a file backup utility that came with my laptop. but since i bought my laptop , ive uninstalled that utility, rendering this button useless. So i was wondering if it was possible to reprogram that button to open another file or program on my computer? And if so what are the requirements and how would i go about doing it? Thanks in advance!

  Read the article

• How can I setup a subnetwork using DDWRT and a 2Wire?

  - by MadBurn

  Ok, I'm having a bit of trouble getting this setup. I'm not really sure what direction I need to be looking in. I am on ATT UVerse and I have to use their horrible 2Wire Modem/Router. But with this router, I have very limited control over my network and my wifi range is too small for my house. But, I have a hardwire ran to my TV which I have hooked into a switch and split the line to my PS3. The problem I'm having, is I don't know how to get the Buffalo DD-WRT setup as a subnetwork so that the PS3 can find my Media Server. Here is a diagram of what I'm trying to accomplish: Blue is ethernet.

  Read the article

• NAT for Sprint Nexus S "Portable Wi-Fi hotspot"

  - by Jon Rodriguez

  I am on a 2010 Macbook Air connected to the web over wifi tethering on my Sprint Nexus S. I want to be able to host a few files using MAMP, but it seems that Sprint is running a NAT. When I query checkip.dyndns.org right now, it returns 68.27.228.75. However, trying to navigate to that IP fails (even though I do have MAMP's Apache running on port 80, as verified via loopback). When I whois 68.27.228.75, it appears to be a Sprint address, with NetName "SPRINTPCS" and OrgName "Sprint Nextel Corporation". So, is there some way I can circumvent Sprint's NAT to allow people to connect to my server that is running on a Nexus S Portable Wi-Fi hotspot?

  Read the article

• How do I create an ad hoc network in Windows 8?

  - by George Edison

  For the life of me, I can't figure out how to create an ad hoc wireless network in Windows 8. Here is what happens if I follow the steps from Windows 7: Right click the network icon and click "Network and Sharing Center": Click "Set up a new connection or network": Where is the option to create an ad hoc network? Therefore I have two related questions: Did I miss something? Is it in there somewhere and I just haven't found it yet? If this feature is not available, is there a tool somewhere I can use that provides this capability? Further information: I have an Intel Wireless WiFi 4965 AGN adapter. I tried the Intel PRO wireless tool and it didn't offer an ad hoc option.

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• internet access options in remote area? (read: no comcast,qwest, etc)

  - by freedrull

  Currently I am living in a fairly "remote" area, in the countryside, and cable internet access through the typical companies like comcast and qwest is just not available here. I've been trying to research other options for fast internet access. There are some small cable companies but they currently do not offer broadband access here. I thought about maybe buying a 3g phone with a data plan and doing some sort of tethering, or perhaps getting an android phone and using it as a wireless AP. This would of course depend on 3g being available here. The only other thing I can think of is some sort of satellite internet service, or doing something crazy like adapting wifi over am radio. Anyone have any ideas, at all, short of moving somewhere else?

  Read the article

• Very poor battery life on Lenovo ThinkPad W500 laptop

  - by Matt

  I have a new ThinkPad W500 laptop (w/ 9 cell battery) running Windows 7 RTM 64-bit. All drivers* and BIOS are the latest. Battery life appeared poor so I performed several tests under the following conditions: Battery starts with 100% charge Screen on minimum brightness Screen saver running Wifi n enabled and active "Normal" set of programs running including Outlook 2007, FeedDemon, TweetDeck and antivirus Laptop left untouched during tests Under the above conditions, I clocked under 2 hours of battery life across 3 tests (1:49, 1:52, 1:47). If I actually use the computer, we're looking at 1:30. Something is not right... The smoking gun here is that Lenovo hasn't officially released Windows 7 drivers for this laptop. I haven't tried with Vista or XP yet. What are others seeing? Update: For W500 owners w/ the 9 cell battery, what value do you see for "Full charge capacity" when on the Battery tab of the Power Manager utility? I see 81.87 Wh.

  Read the article

• Spoofing MAC address to match other device

  - by boj

  At my school, there is a WiFi network where you can register up to one computer or phone. I, however, wish to connect my phone and my computer (Windows 7). I talked to an IT guy at my school and he told me that it registers the computer based on the MAC address (For the record, he's the one who suggested I spoof). So, I got my phone's MAC and now I want to change my computer's address to the same thing. I found this link and this video, so I know how to change it. I was wondering if that would run into problems because they are normally on the same network at home.

  Read the article

• Which mediacenter appliance

  - by Guillaume

  I'm looking to buy a mediacenter appliance, but I am a bit lost by all the offers on the market. Here are the features I am looking for : at least 500Go HDD capable of playing HD (1080p) supporting a good range of video and audio codecs support for subtitles including a DVB-T input (coax) and tuner composite video input 5.1 (or 7.1) analog audio output LAN (100M or Gigabit) fileserver (SMB or NFS) remote control possibly digital output (S/PDIF, TOSLINK, or other) no need for integrated DVD player no need for wifi The Ultio Pro looks nice (http://www.thinkgeek.com/electronics/home-entertainment/d3fe). It just lacks a DVB-T input which is a show killer for me. Thanks for your suggestions.

  Read the article

• TP-LINK TD-W8151N Modem/router as just wi-fi router

  - by Reshma

  I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

  Read the article

• NAS that supports NZB downloading for around £150 ($220) or less (without hard drive)

  - by Jigs

  I have seen a number of NAS's that are around that price, but I am worried that they may not be able to handle the processing of .rar files (I know that can be quite CPU intensive). Does anyone have any experiences with sabnzbd or hellanzb - or similar on their NAS? In terms of features the main requirement is NZB downloading - I am quite flexible on the other features. Wifi support would be nice, but not essential. Torrent downloading would also be nice. One disk drive would probably be enough. Easy installation of application would be nice... but again I am sure I can follow a tutorial.

  Read the article

• Best MTA setup for home or laptop computers - not server

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that connects to various different wifi networks? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to forward mail for "root" to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• display internet usage agreement before users can use internet

  - by Force Flow

  I was looking for a way to display a usage agreement page in browsers that users must agree to before they are allowed to access the internet. This would be for users on public computers and public/open wifi. I'm using a sonicwall firewall which does support this feature, however, there is a rediculously low character limit which makes it impractical to use. I thought about setting the browser's homepage to a usage agreement page, but that can easily be bypassed by navigating to somewhere else. Are there any other approaches that may be worth considering? There is currently no server in place on the public network, though I can set one up if need be.

  Read the article

• Disable (or switch off) a network interface on windows but keep the "plug and play"

  - by Leandro

  I'm looking for a good workaround to do this on Windows 7 and Windows XP: Disable or make ineffective the network interface (ETH, WIFI, any NIC). If the user connect his ETH cable, the network interface enable again. Important Notes to take care: I'm working with wmic on Win7 (through the command line) I'm working with devcon on WinXP (through the command line) I'm specifically working with the .NET Framework 2.0 on C# but this is just for informational purposes. I know that an event won't help me to detect it (if there is a way or workaround to do this I don't know it). The real problem is that when I disable the NIC, I can't know if the user connects his cable or has a wired network. This is why I am looking for a workaround. I'll treat suggestions as answers if no direct answer exists. I'll provide any extra detail necessary.

  Read the article

• How to determine if a device is SATA driven and will be affect by the Sandy Bridge Intel Issue?

  - by joelhaus

  Looking to buy a higher-end Windows 7 laptop, but I'm concerned about the issue with the Intel Sandy Bridge chipset. Otherwise, my price range covers laptops within the latest (Sandy Bridge) generation of the Core i7 family. I understand that there is an issue with SATA ports 2-5 and I use a Windows Home Server over a WiFi connection to share files and backup my PC. The other storage devices that I will use (less frequently) are the built-in DVD-RW disc drive and various devices hooked up to the USB ports (i.e. Android devices, iPod, etc.). The question: Will this setup be negatively impacted by the problem Intel reported about Sandy Bridge? Given this information, is it unwise to purchase a laptop that has this flaw? I really don't know how to determine whether a device is SATA driven or not, so hoping someone can shed some light on this too. Thanks!

  Read the article

• Macports Apache Slow to Start/Stop

  - by moranjk

  I am running OSX 10.8.5 (Mountain Lion) with Apache2 from MacPorts for local development, and just recently I noticed it is taking almost a minute to restart Apache. I wouldn't think anything of it except it normally would restart in less than a second. I had all but given up Googling when I noticed that if I turned off the WiFi (I haven't tried hardwire yet) Apache would restart just as it use to. What would cause Apache to take longer to start when I am connected to the LAN? What can be done to mitigate this issue?

  Read the article

• Ubuntu Lucid startup events

  - by Lakshman Prasad

  On starting up Ubuntu, I seem to have to do the following, all the time: Enter the password for the keyring to unlock, so that it connects to wifi Enable the "Extra" Visual effects from the Appearances preferences Start skype. How can I automate all of these. Bonus points, if I can use the existing chat bundled in the system to use my skype account. Also, since I dual boot, I get the grub options initially to select Windows or Ubuntu that waits for 10 seconds for me to choose. How do I make it go to ubuntu, unless I explicitly not press a key to boot to windows. Thanks in advance.

  Read the article

• Ubuntu Lucid startup events

  - by becomingGuru

  On starting up Ubuntu, I seem to have to do the following, all the time: Enter the password for the keyring to unlock, so that it connects to wifi Enable the "Extra" Visual effects from the Appearances preferences Start skype. How can I automate all of these. Bonus points, if I can use the existing chat bundled in the system to use my skype account. Also, since I dual boot, I get the grub options initially to select Windows or Ubuntu that waits for 10 seconds for me to choose. How do I make it go to ubuntu, unless I explicitly not press a key to boot to windows. Thanks in advance.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >