Search Results

Search found 59067 results on 2363 pages for 'windows firewall'.

Page 61/2363 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • How to disable Windows File Protection in Windows XP or 7 from Registry?

    - by SEARAS
    How to disable Windows File Protection in Windows 7 and/or XP from Registry? I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but i've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post). Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Thanks in advance! Any ideas?

    Read the article

  • Windows 7, Drivers, Cloning and Sysprep

    - by Frank Thornton
    I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

    Read the article

  • What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

    - by Mehper C. Palavuzlar
    This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

    Read the article

  • Empty track in Windows Media Player 12 that can't be deleted

    - by David Brown
    Right after I installed a fresh copy of Windows 7, I synced with my DropBox account that contains all of my music and added the directory to Windows Media Player 12. I now have a strange track that really isn't a track at all. It's grouped under "Unknown Artist" and has absolutely no text. The only reason I know it's there is because it highlights on mouse-over. Double-clicking on it does nothing. When the song before it ends, Windows Media Player stops playing altogether until I choose a different song (it should continue to play the next song on its own). When I try to delete this mysterious track, nothing happens. I've cleared my library and re-imported everything, but this empty track keeps appearing. I have also checked my Music directory and there is no empty MP3. What is going on here?

    Read the article

  • Windows 7: Search indexing is stuck

    - by Ricket
    When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

    Read the article

  • Windows 8 mail cause event 529 when connect to exchange

    - by holian
    I set my company exchange mailbox in Windows 8.1 mail. (outsite). Everything works fine, but after i start the Windows 8.1 mail i get event with id 529 in the security log continously. Reason: Unknown user name or bad password Username: [email protected] range: Type of login: 8 Logon Process: Advapi Authentication Package: Negotiate Workstation Name: SERVERNAME Caller User Name: SERVERNAME $ Calling range BAR NUL Caller Logon ID: (0x0, 0x3E7) Caller Process ID: 4384 Transmitted services: - Source Network Address: 56.43.213.122 Source Port: 55 698 If i close windows mail, events stop flooding the security log in the server. Connection parameters in windwos 8: email:[email protected] password domain:company.local username:myemail server:mydomain.dyndns.org SSL:yes. Any idea whats the problem? I can check my mail, with the same setting on my android phone without any problem. Thank you

    Read the article

  • Prevent Windows 7 from unpluging External HDD

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Virtual environment firewall with CSF + iptables rules on VM?

    - by luison
    We are getting into virtualization with a Proxmox VE (OpenVZ + KVM) server. Our plan for firewall is to have CSF (http://configserver.com/cp/csf.html) running on the host machine as we've had a reasonable good experience with it in the past. Apart from that we plan simple firewall rules on the VM machines (mostly OpenVZ containers with same kernel) and maybe fail2ban simple specific rules. I would appreciate comments with anyone with similar experiences? I understand all traffic comes via the host machine so a combined firewall there with specific firewalling on the VM should work, alltough some iptables rules are hard to get to work on OpenVZ containers.

    Read the article

  • Failure to copy files with ownership/ACL information on a Windows Server 2008 R2 machine

    - by darklion
    I'm attempting to copy a directory tree, maintaining its ownership information using the command: XCOPY S:\ProjectsDefault\Tempalte\admin S:\Projects\00\111\admin /S /E /I /O the command gives an Access denied error message, and while it does create the directory tree, the ownership and ACL information is not copied. This is being done on a Windows 2008 R2 Server which has mounted a share from a Windows 2003 R2 domain controller. The user has been been granted full access to the share and is a member of the Domain Admins security group. Oddly enough, the command does work if performed on a different (Windows 2003 R2 Server). (It also works if done using the Domain Administrator account on the 2008 server.)

    Read the article

  • Remote Desktop via VPN from Mac to Windows Vista

    - by Vegar
    I have some problems connecting to my office from home. I'm getting the following error message: Remote Desktop Connection cannot verify the identity of the computer that you want to connect to. Try reconnecting to the Windows-based computer, or contact our administrator. I have downloaded CoRD, and for some reason, that works okay. I can also connect from a Windows 7 running on VMWare Fusion. On Windows 7, I use SonicWall Global VPN Client, and on the Mac, I use VPN tracker, if that is related... What's going on?

    Read the article

  • Firewall Deep Inspection Updates and Antivirus Subscription, worth it?

    - by msemack
    I realize that this is a subjective question, but I'm trying to get some experiences We have Juniper firewalls in our organization (SSG-320M, SSG-5, and some old NS-5GT). We have the option of a yearly subscription for: Deep Inspection Signature Updates Juniper-Kaspersky Antivirus I seem similar services available from other Firewall vendors. We have Symantec Endpoint Protection deployed to all workstations and servers, plus a dedicated appliance for e-mail spam/virus filtering. So, I'm not sure what these firewall-base services will bring to the table that I don't already have. I would appreciate some feedback from people using these firewall services (Juniper or otherwise). Are these services generally worth it? Do they really catch anything? Do they interfere with normal traffic (false positives)?

    Read the article

  • Windows Vista - Can't start any program without choosing "Run as administrator"

    - by Dave Forgac
    A friend called me saying that her computer recently said it was applying a Windows update when it was shutting down. Now when logged in as her normal user whenever she tries to run any program from the start menu or from a shortcut on the desktop she gets the following popup: "Windows cannot access the specified device path or file You may not have the appropriate permissions to access the item" If she right-clicks and chooses 'Run as administrator' the program will run. We checked the Windows update history and it said the update was applied successfully and that there are no updates available. Unfortunately I'm in a different city so I don't have physical access to the system to look at it any further. Has anyone had a similar problem or have any suggestions?

    Read the article

  • Windows VPN - NO internet access

    - by sharru
    I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

    Read the article

  • Windows 7 wake from sleep and UTC?

    - by Joshua Elliott
    I've been having problems with windows 7 waking from sleep after one minute or so on my laptop. I also have ArchLinux installed on this computer. A while back I tried a registry tweak to get windows to use UTC so it would play nice with Linux. The registry tweak didn't seem to work and my windows clock was always wrong. Today I deleted the registry entry that I added, and the problem with sleeping seemed to go away. Can anyone make sense of this? The registry entry I added was: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] "RealTimeIsUniversal"=dword:00000001

    Read the article

  • How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

    - by Timbo
    I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

    Read the article

  • Connecting to Windows 7 from fedora is slow

    - by user44212
    I use rdesktop command to connect to windows 7 machine remotely but I get a very slow reponse when I try and connent to it. The command that I used to connect to it is rdesktop -4 -C -x -b : -g 100% 192.168.1.100. I have tried using the rdesktop command to connect to the console port as well but the result is the same. I have even tried using the Terminal server client application the result is the same. I am trying to connect from fedora 14 machine to windows 7 professional is there any tweaking that needs to be done to overcome this issue either on fedora or Windows 7.

    Read the article

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Windows 8 to 8.1 Pro Upgrade SecureBoot Error

    - by Alexandru
    I upgraded from Windows 8 to Windows 8.1. I have an Alienware Aurora R4 with the latest BIOS firmware version, A09. Ever since I did the upgrade, I get a watermark on my desktop saying, "SecureBoot isn't configured correctly"...I would like to get rid of this watermark the correct way (not by hacking system DLLs). My BIOS shows me booting in UEFI mode, and I see that SecureBoot is actually disabled from there. I cannot enable SecureBoot, in either UEFI mode or Legacy Boot mode. Note, I can't even get Legacy Boot mode working without re-formatting my system which I really don't plan on doing, so my question is this...what has changed in the way Windows handles SecureBoot? As far as I can tell, I do not have SecureBoot enabled, and it is trying to tell me that it isn't configured correctly. Why does it even care to check if my BIOS doesn't have it on anyways?! Its so frustrating!

    Read the article

  • Can Windows XP remember file icon position?

    - by g .
    Windows allows you to arrange icons however you like in a window. However after some time when I go back to the window, it has forgotten the icon positions and has completely rearranged the icons. Is there a way to preserve the icon positions? In the previous version of Windows I used, this would happen on rare occasions (about 6 months) and it might only move a couple of icons. Now it is happening practically every day and it is every single icon. Attempts to rearrange them manually are futile and it is increasingly maddening. Searching Google, I have found a number of programs that allow you to save and restore icon position on the desktop. But, this is just a regular folder window so I am not sure if any of those would even work. Some details: Windows XP SP 3 running in Parallels 5 virtual machine Auto Arrange and Align to Grid are NOT turned on Fresh OS install and only setting icon positions in one window

    Read the article

  • What is "queued Windows Error Reporting"?

    - by Rewinder
    I was cleaning up my laptop hard-disk, running Windows 7, and as part of the process I ran the Disk Cleanup utility. To my surprise I saw 2 items in the list that were quite large (both ~300MB). Per user queued Windows Error Reporting System queued Windows Error Reporting I guess I had never noticed these, because they were never that big. So, what are these items? Any particular reason why they became so large all of a sudden? And finally, is it safe to remove them?

    Read the article

  • prevent use of 'net user' command to change passwords on windows vista / xp

    - by guest
    hello the point is, if i'm logged in (and as almost every windows user, i've got an admin-account), and someone comes across my not locked pc, it is possible to change my password the pro-way through using: net user Admin %NEW_PASSWD% what can i do to prevent that, besides not being logged in as admin. i once saw a way, where the 'net user' command was substituted by a .bat file. so if you call 'net user Admin ...', it runs this .bat-file instead, which locks the notebook immediately. problem is, i honestly don't know how i could let windows substitute eg net.exe with a .bat-file. (too little windows knowledge) do you know any way how to do it? i'd appreciate it.

    Read the article

  • Windows 8 account and MSN

    - by win8user
    I've installed windows 8 and during setup it wanted my email. I provided an alternative email (let's call it email_1) for the installation to complete. Then I've installed windows live (msn only), for which I use another email (email_2). Now, every time I start windows and open msn, I'm signed in with email_1. I selected "forget me" for email_1 address in the msn login window, but I'm somehow always signed in with email_1. Is there any way to completely remove email_1 from the msn?

    Read the article

  • Windows 7 Locking Executable Files

    - by James Burgess
    Since I've been using Windows 7 RTM (as opposed to the Beta and RCs), I've been having a peculiar issue with executable files. I first noticed it whilst using Visual Studio, in that when building a project, it would often fail saying that the output file was locked - but the problem has stemmed further. When I've executed an application, closed it (cleanly), and attempted to delete/move/rename/overwrite said file, Windows 7 tells me that the file is locked/access is denied. I've made use of software like LockHunter/Unlocker but it is seemingly unable to remove these locks (most of the time, it shows no locks at all). After about 5-10 minutes, the respective files are unlocked again, but needless to say this is a bit of a workflow-breaker (as it's not simply constrained to VS). I've done the usual tasks of virus/malware scanning, and turned up with absolutely nothing. I've got no peculiar services running, and the problem was not present before I installed a Windows 7 RTM version. Any help is greatly appreciated.

    Read the article

  • How to charge an iPhone on a Windows PC without Installaing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Windows 7 blocks network access to network-installed apps

    - by VokinLoksar
    Windows 2008 R2 domain. Users, running Windows 7 Enterprise, are trying to run some software from a network share. Specifically, I've tested this with MATLAB and PuTTY. When starting, MATLAB has to contact a licensing server to get its license. This action fails for regular users when they start MATLAB from the network share. However, if they copy the installation directory to a local disk everything works fine. Running MATLAB as an admin user from the network share also works. Same story with PuTTY. If the executable is launched from the share, regular users cannot connect to any servers. Something is blocking network communications for programs that are launched from a network drive. Here's the only other mention I could find of the same problem: https://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4504b192-0bc0-4402-8e00-a936ea7e6dff It's not the Windows firewall or the IE security settings. Does anyone have any clue as to what this is?

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >