Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 610/664 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

  • Why is Windows 7 not following all routes?

    - by GigabyteProductions
    My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

    Read the article

  • Can't install .NET framework 4.0 on Windows XP professional version 2002 SP3 (OS bug?)

    - by that guy
    .NET framework 4.0 install fails on Windows XP professional version 2002 SP3: I tried to run setup using "run as..." to make sure the admin rights are used ("protect my computer..." tick was deselected of course). I tried everything: installing using online/offline setup, windows update. install goes a little and then "rolls back" and says: Installation did not succeed .NET Framework 4 has not been installed because: Fatal error during installation. for more information about this problem, see the log file. the full log: http://pastebay.net/1433771 Any ideas? EDIT1: I have found this in the log: "BlockIf: You must install the 32-bit Windows Imaging Component (WIC) before you run Setup. Please visit the Microsoft Download Center to install WIC, and then rerun Setup...." So I found it, and launched "wic_x86_enu.exe" - but it said: WIC Setup error Newer version of update is already on the system. I have already installed: .NET framewrok 2.0 SP2 .NET framewrok 3.0 SP2 .NET framewrok 3.5 SP1 but I need 4.0 . EDIT2: another attempt and it's log. (this time better copy of log file): http://pastebin.com/gmGfbM9a (copy to notepad and save as .htm and open with internet browser). I have tried all the solutions I could find - and nothing helped. I have found something weird: when I formatted the hard drive and installed windows xp again - the .NET framework 4.0 installed ok, but when I plugged my 100Mbit internet cable - the operating system kind off "locked itself" and the bug returned - I could no longer install .NET framework 4.0 again. There was no reason for that to happen, for example I have windows server 2003 in local network, but I don't have active directory enabled on it or anything like that - the server just has some folders shared and thats all (all server's "features" are default). I had the second pc with the same problem - with XP on it too. This seems like the bug of Operating System to me. I couldn't find what was causing the problem. After many days I gave up: backuped everything, formatted HDD and installed Windows 7 professional 64bit. .NET framework 4.0 installed with no problem on it.

    Read the article

  • QNAP (469L) with Debian: can't connect to router

    - by agtoever
    I've been running my QNAP 469L with Debian (Wheezy deb7u3) for a few months. Yesterday I upgraded the memory to 4 GB. The system boots fine, but since the upgrade, I'm not able to connect the server to my router (a TP-Link WR941ND). My configuration: The router runs a DHCP server (192.168.67.100 and up), with a preconfigured ip address for the QNAP (192.168.67.10). The router is on 192.168.67.1. As said, Debian is installed on the QNAP (which can be regarded as a normal computer). Networking hardware on the QNAP: Intel PRO/1000 Network Connection using the e1000e kernel module. This is what I have tried so far: Replace the network cable (tried 3 different cables on different router ports). Check for messages from the kernel: dmesg | grep eth. Besides the normal hardware messages I get a ADDRCONF(NETDEV_UP): eth0: link is not ready for each call to ifup. Manually restart the network sudo server networking restart Check sudo ifconfig (eth0 is up, but no ip addresses). Check the /etc/network/interfaces which has (besides the loopback device) an allow-hotplug eth0 and iface eth0 inet dhcp, which is afaik the default Debian configuration. Since the server has two ethernet ports, I checked if I'm using the right port (checked the hardware address that ifconfig reports for eth0 is the same as the hardware address that is in the preconfigured ip address for the server in the router. Do a manual sudo ifdown eth0 && sudo ifup eth0 with no results (but an extra ADDRCONF(NETDEV_UP): eth0: link is not ready in the kernel log) Do a dhcp request dhclient -v eth0: for about a minute requests are send (according to the terminal) and at the end I get a No DHCPOFFERS received. No working leases in persistent database - sleeping.. Check the router system log if DHCP requests are received. I see them for some devices (my Mac, my iPhone) but not from the QNAP. The log entry looks like: DHCPS:Recv REQUEST from 84:85:06:07:75:6A and then a DHCPS:Send ACK to 192.168.67.101. There are no records from the QNAP's hardware address. So the two error messages that I do get are: ADDRCONF(NETDEV_UP): eth0: link is not ready for every ifup and No DHCPOFFERS received. No working leases in persistent database - sleeping. for every DHCP call.

    Read the article

  • Possible HDD malfunction. Need help in diagnosing

    - by Protheus
    Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

    Read the article

  • How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

    - by frLich
    I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

    Read the article

  • OEM sound card with no drivers or support

    - by randy
    I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

    Read the article

  • windows 7 virtual wireless adapter keeps going to sleep

    - by conners
    Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

    Read the article

  • ffmpeg - join / merge on top of each other

    - by AisIceEyes
    I'm trying to join together two videos on top of each other. I already did these two ffmpeg commands ffmpeg -i 2_Out_of_Control.VOB -aspect 16:9 \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1280:720,boxblur=lp=13" \ -c:v libx264 -preset medium \ -c:a copy \ '2(blurred)Out_of_Control.mp4' ffmpeg -i 2_Out_of_Control.VOB \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1080:720" \ -c:v libx264 -preset medium \ -c:a copy \ '2(clear)Out_of_Control.mp4' I'm currently stuck on making the "clear" version on top of the "blurred" version. I'm not sure how to do that. Can anybody help please? Been googling for around 2 days already. Only achieved it by using OpenShot but yeah, would prefer if there is an ffmpeg command to merge the two videos on top of each other. Edit: I want the "clear" video to be at the center at the top of the "blurred" video Edit2: console output would be the same as above: ffmpeg -i 2(blurred)Out_of_Control.mp4 \ -i 2(clear)Out_of_Control.mp4 \ -aspect 16:9 \ -vf <just something that will join the two together: the blurred at the bottom, clear at top that is centered> \ -c:v libx264 -preset medium \ -c:a copy \ '2_Out_of_Control_VOB.mp4' Edit3: here is the output when I used ffmpeg -i 2_Out_of_Control.VOB $ ffmpeg -i 2_Out_of_Control.VOB ffmpeg version git-2013-10-03-c7fe2a3 Copyright (c) 2000-2013 the FFmpeg developers built on Oct 4 2013 05:22:06 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --prefix=/home/username/ffmpeg_build --extra-cflags=-I/home/username/ffmpeg_build/include --extra-ldflags=-L/home/username/ffmpeg_build/lib --bindir=/home/username/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab libavutil 52. 46.100 / 52. 46.100 libavcodec 55. 34.100 / 55. 34.100 libavformat 55. 19.100 / 55. 19.100 libavdevice 55. 3.100 / 55. 3.100 libavfilter 3. 88.101 / 3. 88.101 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc 52. 3.100 / 52. 3.100 Input #0, mpeg, from '2_Out_of_Control.VOB': Duration: 00:05:00.01, start: 0.500000, bitrate: 4574 kb/s Stream #0:0[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, smpte170m), 720x480 [SAR 8:9 DAR 4:3], max. 9334 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0:1[0x80]: Audio: ac3, 48000 Hz, stereo, fltp, 384 kb/s At least one output file must be specified $

    Read the article

  • A Windows Update Prevented Live Discs From Working?

    - by user88311
    First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

    Read the article

  • Windows 7 booting and startup repair issues

    - by aardvark
    I have a MSI FR720 laptop with Windows 7 and Lubuntu partions. For quite a while (6 months or so) I've been having issues booting from my hard drive, it'd take me between 5 minutes and several hours for me to be able to have it recognize the hard drive as a bootable device. I did several disk checks on it, and my hard drive seems in perfect condition, and the fact that booting would usually only work after removing the hard drive and trying to reset it in its slot or lightly shaking it makes me think it had something to do with the connection in the hard drive slot as opposed to the hard drive itself. I was having particular issues with it detecting the hard drive today so I decided to try booting it from an external hard drive dock. It detected it first try and so far has had no problems finding the bootable partitions on my hard drive. When I selected my Windows 7 partition from the boot menu it said that it hadn't been shut down properly last time and needed startup repair. I've done this several times over the last 6 months, so this is hardly unusual. I do startup repair, it fails, and then I try to do a system restore. The system restore also failed, and it says that no files were changed. I restart and try it again. However, this time when I get to the startup repair it's not detecting a Windows OS. I tried clicking next and doing a startup repair but the repair is always failing. If I ignore the startup repair option and instead select "Launch windows normally" it will get to the windows animation, stop halfway through and then crash into a BSoD. I can't read the error on the screen because it immediately switches to back and tries to restart. This is my first time asking a question like this online, so let me know if I need to provide any extra information and I'll do my best to give it I tried using diskpart to find the list of partitions and see if one's labelled as an active partition, but it says that no disk were detected. I can run Lubuntu just fine. I can also see all of my Windows 7 files from it EDIT: The startup repair diagnosis and repair log is this: -- Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: Check for updates Result: Completed successfully. Error code = 0x0 Time taken = 15ms Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Time taken = 31ms Root cause found. If a hard disk is installed, it is not responding. -- Any chance that this is a result of me doing this through an external dock through a USB drive?

    Read the article

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • ASP.NET Podcast Show #148 - ASP.NET WebForms to build a Mobile Web Application

    - by Wallym
    Check the podcast site for the original url. This is the video and source code for an ASP.NET WebForms app that I wrote that is optimized for the iPhone and mobile environments.  Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download M4V for iPhone/iPad. Download MP3. Link to iWebKit. Source Code: <%@ Page Title="MapSplore" Language="C#" MasterPageFile="iPhoneMaster.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="AT_iPhone_Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="Content" Runat="Server" ClientIDMode="Static">    <asp:ScriptManager ID="sm" runat="server"         EnablePartialRendering="true" EnableHistory="false" EnableCdn="true" />    <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script>    <script  language="javascript"  type="text/javascript">    <!--    Sys.WebForms.PageRequestManager.getInstance().add_endRequest(endRequestHandle);    function endRequestHandle(sender, Args) {        setupMapDiv();        setupPlaceIveBeen();    }    function setupPlaceIveBeen() {        var mapPlaceIveBeen = document.getElementById('divPlaceIveBeen');        if (mapPlaceIveBeen != null) {            var PlaceLat = document.getElementById('<%=hdPlaceIveBeenLatitude.ClientID %>').value;            var PlaceLon = document.getElementById('<%=hdPlaceIveBeenLongitude.ClientID %>').value;            var PlaceTitle = document.getElementById('<%=lblPlaceIveBeenName.ClientID %>').innerHTML;            var latlng = new google.maps.LatLng(PlaceLat, PlaceLon);            var myOptions = {                zoom: 14,                center: latlng,                mapTypeId: google.maps.MapTypeId.ROADMAP            };            var map = new google.maps.Map(mapPlaceIveBeen, myOptions);            var marker = new google.maps.Marker({                position: new google.maps.LatLng(PlaceLat, PlaceLon),                map: map,                title: PlaceTitle,                clickable: false            });        }    }    function setupMapDiv() {        var mapdiv = document.getElementById('divImHere');        if (mapdiv != null) {            var PlaceLat = document.getElementById('<%=hdPlaceLat.ClientID %>').value;            var PlaceLon = document.getElementById('<%=hdPlaceLon.ClientID %>').value;            var PlaceTitle = document.getElementById('<%=hdPlaceTitle.ClientID %>').value;            var latlng = new google.maps.LatLng(PlaceLat, PlaceLon);            var myOptions = {                zoom: 14,                center: latlng,                mapTypeId: google.maps.MapTypeId.ROADMAP            };            var map = new google.maps.Map(mapdiv, myOptions);            var marker = new google.maps.Marker({                position: new google.maps.LatLng(PlaceLat, PlaceLon),                map: map,                title: PlaceTitle,                clickable: false            });        }     }    -->    </script>    <asp:HiddenField ID="Latitude" runat="server" />    <asp:HiddenField ID="Longitude" runat="server" />    <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js%22%3E%3C/script>    <script language="javascript" type="text/javascript">        $(document).ready(function () {            GetLocation();            setupMapDiv();            setupPlaceIveBeen();        });        function GetLocation() {            if (navigator.geolocation != null) {                navigator.geolocation.getCurrentPosition(getData);            }            else {                var mess = document.getElementById('<%=Message.ClientID %>');                mess.innerHTML = "Sorry, your browser does not support geolocation. " +                    "Try the latest version of Safari on the iPhone, Android browser, or the latest version of FireFox.";            }        }        function UpdateLocation_Click() {            GetLocation();        }        function getData(position) {            var latitude = position.coords.latitude;            var longitude = position.coords.longitude;            var hdLat = document.getElementById('<%=Latitude.ClientID %>');            var hdLon = document.getElementById('<%=Longitude.ClientID %>');            hdLat.value = latitude;            hdLon.value = longitude;        }    </script>    <asp:Label ID="Message" runat="server" />    <asp:UpdatePanel ID="upl" runat="server">        <ContentTemplate>    <asp:Panel ID="pnlStart" runat="server" Visible="true">    <div id="topbar">        <div id="title">MapSplore</div>    </div>    <div id="content">        <ul class="pageitem">            <li class="menu">                <asp:LinkButton ID="lbLocalDeals" runat="server" onclick="lbLocalDeals_Click">                <asp:Image ID="imLocalDeals" runat="server" ImageUrl="~/Images/ArtFavor_Money_Bag_Icon.png" Height="30" />                <span class="name">Local Deals.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbLocalPlaces" runat="server" onclick="lbLocalPlaces_Click">                <asp:Image ID="imLocalPlaces" runat="server" ImageUrl="~/Images/Andy_Houses_on_the_horizon_-_Starburst_remix.png" Height="30" />                <span class="name">Local Places.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbWhereIveBeen" runat="server" onclick="lbWhereIveBeen_Click">                <asp:Image ID="imImHere" runat="server" ImageUrl="~/Images/ryanlerch_flagpole.png" Height="30" />                <span class="name">I've been here.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbMyStats" runat="server">                <asp:Image ID="imMyStats" runat="server" ImageUrl="~/Images/Anonymous_Spreadsheet.png" Height="30" />                <span class="name">My Stats.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbAddAPlace" runat="server" onclick="lbAddAPlace_Click">                <asp:Image ID="imAddAPlace" runat="server" ImageUrl="~/Images/jean_victor_balin_add.png" Height="30" />                <span class="name">Add a Place.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="button">                <input type="button" value="Update Your Current Location" onclick="UpdateLocation_Click()">                </li>        </ul>    </div>    </asp:Panel>    <div>    <asp:Panel ID="pnlCoupons" runat="server" Visible="false">        <div id="topbar">        <div id="title">MapSplore</div>        <div id="leftbutton">            <asp:LinkButton runat="server" Text="Return"                 ID="ReturnFromDeals" OnClick="ReturnFromDeals_Click" /></div></div>    <div class="content">    <asp:ListView ID="lvCoupons" runat="server">        <LayoutTemplate>            <ul class="pageitem" runat="server">                <asp:PlaceHolder ID="itemPlaceholder" runat="server" />            </ul>        </LayoutTemplate>        <ItemTemplate>            <li class="menu">                <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Place.Name") %>' OnClick="lbBusiness_Click">                    <span class="comment">                    <asp:Label ID="lblAddress" runat="server" Text='<%#Eval("Place.Address1") %>' />                    <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Place.Distance"))) + " meters" %>' CssClass="smallText" />                    <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                    <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' />                    </span>                    <span class="arrow"></span>                </asp:LinkButton></li></ItemTemplate></asp:ListView><asp:GridView ID="gvCoupons" runat="server" AutoGenerateColumns="false">            <HeaderStyle BackColor="Silver" />            <AlternatingRowStyle BackColor="Wheat" />            <Columns>                <asp:TemplateField AccessibleHeaderText="Business" HeaderText="Business">                    <ItemTemplate>                        <asp:Image ID="imPlaceType" runat="server" Text='<%#Eval("Type") %>' ImageUrl='<%#Eval("Image") %>' />                        <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Name") %>' OnClick="lbBusiness_Click" />                        <asp:LinkButton ID="lblAddress" runat="server" Text='<%#Eval("Address1") %>' CssClass="smallText" />                        <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>' CssClass="smallText" />                        <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                        <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' />                        <asp:Label ID="lblInfo" runat="server" Visible="false" />                    </ItemTemplate>                </asp:TemplateField>            </Columns>        </asp:GridView>    </div>    </asp:Panel>    <asp:Panel ID="pnlPlaces" runat="server" Visible="false">    <div id="topbar">        <div id="title">            MapSplore</div><div id="leftbutton">            <asp:LinkButton runat="server" Text="Return"                 ID="ReturnFromPlaces" OnClick="ReturnFromPlaces_Click" /></div></div>        <div id="content">        <asp:ListView ID="lvPlaces" runat="server">            <LayoutTemplate>                <ul id="ulPlaces" class="pageitem" runat="server">                    <asp:PlaceHolder ID="itemPlaceholder" runat="server" />                    <li class="menu">                        <asp:LinkButton ID="lbNotListed" runat="server" CssClass="name"                            OnClick="lbNotListed_Click">                            Place not listed                            <span class="arrow"></span>                            </asp:LinkButton>                    </li>                </ul>            </LayoutTemplate>            <ItemTemplate>            <li class="menu">                <asp:LinkButton ID="lbImHere" runat="server" CssClass="name"                     OnClick="lbImHere_Click">                <%#DisplayName(Eval("Name")) %>&nbsp;                <%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>                <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                <span class="arrow"></span>                </asp:LinkButton></li></ItemTemplate></asp:ListView>    </div>    </asp:Panel>    <asp:Panel ID="pnlImHereNow" runat="server" Visible="false">        <div id="topbar">        <div id="title">            MapSplore</div><div id="leftbutton">            <asp:LinkButton runat="server" Text="Places"                 ID="lbImHereNowReturn" OnClick="lbImHereNowReturn_Click" /></div></div>            <div id="rightbutton">            <asp:LinkButton runat="server" Text="Beginning"                ID="lbBackToBeginning" OnClick="lbBackToBeginning_Click" />            </div>        <div id="content">        <ul class="pageitem">        <asp:HiddenField ID="hdPlaceId" runat="server" />        <asp:HiddenField ID="hdPlaceLat" runat="server" />        <asp:HiddenField ID="hdPlaceLon" runat="server" />        <asp:HiddenField ID="hdPlaceTitle" runat="server" />        <asp:Button ID="btnImHereNow" runat="server"             Text="I'm here" OnClick="btnImHereNow_Click" />             <asp:Label ID="lblPlaceTitle" runat="server" /><br />        <asp:TextBox ID="txtWhatsHappening" runat="server" TextMode="MultiLine" Rows="2" style="width:300px" /><br />        <div id="divImHere" style="width:300px; height:300px"></div>        </div>        </ul>    </asp:Panel>    <asp:Panel runat="server" ID="pnlIveBeenHere" Visible="false">        <div id="topbar">        <div id="title">            Where I've been</div><div id="leftbutton">            <asp:LinkButton ID="lbIveBeenHereBack" runat="server" Text="Back" OnClick="lbIveBeenHereBack_Click" /></div></div>        <div id="content">        <asp:ListView ID="lvWhereIveBeen" runat="server">            <LayoutTemplate>                <ul id="ulWhereIveBeen" class="pageitem" runat="server">                    <asp:PlaceHolder ID="itemPlaceholder" runat="server" />                </ul>            </LayoutTemplate>            <ItemTemplate>            <li class="menu" runat="server">                <asp:LinkButton ID="lbPlaceIveBeen" runat="server" OnClick="lbPlaceIveBeen_Click" CssClass="name">                    <asp:Label ID="lblPlace" runat="server" Text='<%#Eval("PlaceName") %>' /> at                    <asp:Label ID="lblTime" runat="server" Text='<%#Eval("ATTime") %>' CssClass="content" />                    <asp:HiddenField ID="hdATID" runat="server" Value='<%#Eval("ATID") %>' />                    <span class="arrow"></span>                </asp:LinkButton>            </li>            </ItemTemplate>        </asp:ListView>        </div>        </asp:Panel>    <asp:Panel runat="server" ID="pnlPlaceIveBeen" Visible="false">        <div id="topbar">        <div id="title">            I've been here        </div>        <div id="leftbutton">            <asp:LinkButton ID="lbPlaceIveBeenBack" runat="server" Text="Back" OnClick="lbPlaceIveBeenBack_Click" />        </div>        <div id="rightbutton">            <asp:LinkButton ID="lbPlaceIveBeenBeginning" runat="server" Text="Beginning" OnClick="lbPlaceIveBeenBeginning_Click" />        </div>        </div>        <div id="content">            <ul class="pageitem">            <li>            <asp:HiddenField ID="hdPlaceIveBeenPlaceId" runat="server" />            <asp:HiddenField ID="hdPlaceIveBeenLatitude" runat="server" />            <asp:HiddenField ID="hdPlaceIveBeenLongitude" runat="server" />            <asp:Label ID="lblPlaceIveBeenName" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenAddress" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenCity" runat="server" />,             <asp:Label ID="lblPlaceIveBeenState" runat="server" />            <asp:Label ID="lblPlaceIveBeenZipCode" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenCountry" runat="server" /><br />            <div id="divPlaceIveBeen" style="width:300px; height:300px"></div>            </li>            </ul>        </div>                </asp:Panel>         <asp:Panel ID="pnlAddPlace" runat="server" Visible="false">                <div id="topbar"><div id="title">MapSplore</div><div id="leftbutton"><asp:LinkButton ID="lbAddPlaceReturn" runat="server" Text="Back" OnClick="lbAddPlaceReturn_Click" /></div><div id="rightnav"></div></div><div id="content">    <ul class="pageitem">        <li id="liPlaceAddMessage" runat="server" visible="false">        <asp:Label ID="PlaceAddMessage" runat="server" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtPlaceName" runat="server" placeholder="Name of Establishment" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtAddress1" runat="server" placeholder="Address 1" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtCity" runat="server" placeholder="City" />        </li>        <li class="select">        <asp:DropDownList ID="ddlProvince" runat="server" placeholder="Select State" />          <span class="arrow"></span>              </li>        <li class="bigfield">        <asp:TextBox ID="txtZipCode" runat="server" placeholder="Zip Code" />        </li>        <li class="select">        <asp:DropDownList ID="ddlCountry" runat="server"             onselectedindexchanged="ddlCountry_SelectedIndexChanged" />        <span class="arrow"></span>        </li>        <li class="bigfield">        <asp:TextBox ID="txtPhoneNumber" runat="server" placeholder="Phone Number" />        </li>        <li class="checkbox">            <span class="name">You Here Now:</span> <asp:CheckBox ID="cbYouHereNow" runat="server" Checked="true" />        </li>        <li class="button">        <asp:Button ID="btnAdd" runat="server" Text="Add Place"             onclick="btnAdd_Click" />        </li>    </ul></div>        </asp:Panel>        <asp:Panel ID="pnlImHere" runat="server" Visible="false">            <asp:TextBox ID="txtImHere" runat="server"                 TextMode="MultiLine" Rows="3" Columns="40" /><br />            <asp:DropDownList ID="ddlPlace" runat="server" /><br />            <asp:Button ID="btnHere" runat="server" Text="Tell Everyone I'm Here"                 onclick="btnHere_Click" /><br />        </asp:Panel>     </div>    </ContentTemplate>    </asp:UpdatePanel> </asp:Content> Code Behind .cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using LocationDataModel; public partial class AT_iPhone_Default : ViewStatePage{    private iPhoneDevice ipd;     protected void Page_Load(object sender, EventArgs e)    {        LocationDataEntities lde = new LocationDataEntities();        if (!Page.IsPostBack)        {            var Countries = from c in lde.Countries select c;            foreach (Country co in Countries)            {                ddlCountry.Items.Add(new ListItem(co.Name, co.CountryId.ToString()));            }            ddlCountry_SelectedIndexChanged(ddlCountry, null);            if (AppleIPhone.IsIPad())                ipd = iPhoneDevice.iPad;            if (AppleIPhone.IsIPhone())                ipd = iPhoneDevice.iPhone;            if (AppleIPhone.IsIPodTouch())                ipd = iPhoneDevice.iPodTouch;        }    }    protected void btnPlaces_Click(object sender, EventArgs e)    {    }    protected void btnAdd_Click(object sender, EventArgs e)    {        bool blImHere = cbYouHereNow.Checked;        string Place = txtPlaceName.Text,            Address1 = txtAddress1.Text,            City = txtCity.Text,            ZipCode = txtZipCode.Text,            PhoneNumber = txtPhoneNumber.Text,            ProvinceId = ddlProvince.SelectedItem.Value,            CountryId = ddlCountry.SelectedItem.Value;        int iProvinceId, iCountryId;        double dLatitude, dLongitude;        DataAccess da = new DataAccess();        if ((!String.IsNullOrEmpty(ProvinceId)) &&            (!String.IsNullOrEmpty(CountryId)))        {            iProvinceId = Convert.ToInt32(ProvinceId);            iCountryId = Convert.ToInt32(CountryId);            if (blImHere)            {                dLatitude = Convert.ToDouble(Latitude.Value);                dLongitude = Convert.ToDouble(Longitude.Value);                da.StorePlace(Place, Address1, String.Empty, City,                    iProvinceId, ZipCode, iCountryId, PhoneNumber,                    dLatitude, dLongitude);            }            else            {                da.StorePlace(Place, Address1, String.Empty, City,                    iProvinceId, ZipCode, iCountryId, PhoneNumber);            }            liPlaceAddMessage.Visible = true;            PlaceAddMessage.Text = "Awesome, your place has been added. Add Another!";            txtPlaceName.Text = String.Empty;            txtAddress1.Text = String.Empty;            txtCity.Text = String.Empty;            ddlProvince.SelectedIndex = -1;            txtZipCode.Text = String.Empty;            txtPhoneNumber.Text = String.Empty;        }        else        {            liPlaceAddMessage.Visible = true;            PlaceAddMessage.Text = "Please select a State and a Country.";        }    }    protected void ddlCountry_SelectedIndexChanged(object sender, EventArgs e)    {        string CountryId = ddlCountry.SelectedItem.Value;        if (!String.IsNullOrEmpty(CountryId))        {            int iCountryId = Convert.ToInt32(CountryId);            LocationDataModel.LocationDataEntities lde = new LocationDataModel.LocationDataEntities();            var prov = from p in lde.Provinces where p.CountryId == iCountryId                        orderby p.ProvinceName select p;                        ddlProvince.Items.Add(String.Empty);            foreach (Province pr in prov)            {                ddlProvince.Items.Add(new ListItem(pr.ProvinceName, pr.ProvinceId.ToString()));            }        }        else        {            ddlProvince.Items.Clear();        }    }    protected void btnImHere_Click(object sender, EventArgs e)    {        int i = 0;        DataAccess da = new DataAccess();        double Lat = Convert.ToDouble(Latitude.Value),            Lon = Convert.ToDouble(Longitude.Value);        List<Place> lp = da.NearByLocations(Lat, Lon);        foreach (Place p in lp)        {            ListItem li = new ListItem(p.Name, p.PlaceId.ToString());            if (i == 0)            {                li.Selected = true;            }            ddlPlace.Items.Add(li);            i++;        }        pnlAddPlace.Visible = false;        pnlImHere.Visible = true;    }    protected void lbImHere_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        ListViewItem lvi = (ListViewItem)(((LinkButton)sender).Parent);        HiddenField hd = (HiddenField)lvi.FindControl("hdPlaceId");        long PlaceId = Convert.ToInt64(hd.Value);        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        Place pl = da.GetPlace(PlaceId);        pnlImHereNow.Visible = true;        pnlPlaces.Visible = false;        hdPlaceId.Value = PlaceId.ToString();        hdPlaceLat.Value = pl.Latitude.ToString();        hdPlaceLon.Value = pl.Longitude.ToString();        hdPlaceTitle.Value = pl.Name;        lblPlaceTitle.Text = pl.Name;    }    protected void btnHere_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        string WhatsH = txtImHere.Text;        long PlaceId = Convert.ToInt64(ddlPlace.SelectedValue);        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        da.StoreUserAT(UserName, PlaceId, WhatsH,            dLatitude, dLongitude);    }    protected void btnLocalCoupons_Click(object sender, EventArgs e)    {        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();     }    protected void lbBusiness_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        GridViewRow gvr = (GridViewRow)(((LinkButton)sender).Parent.Parent);        HiddenField hd = (HiddenField)gvr.FindControl("hdPlaceId");        string sPlaceId = hd.Value;        Int64 PlaceId;        if (!String.IsNullOrEmpty(sPlaceId))        {            PlaceId = Convert.ToInt64(sPlaceId);        }    }    protected void lbLocalDeals_Click(object sender, EventArgs e)    {        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        pnlCoupons.Visible = true;        pnlStart.Visible = false;        List<GeoPromotion> lgp = da.NearByDeals(dLatitude, dLongitude);        lvCoupons.DataSource = lgp;        lvCoupons.DataBind();    }    protected void lbLocalPlaces_Click(object sender, EventArgs e)    {        DataAccess da = new DataAccess();        double Lat = Convert.ToDouble(Latitude.Value);        double Lon = Convert.ToDouble(Longitude.Value);        List<LocationDataModel.Place> places = da.NearByLocations(Lat, Lon);        lvPlaces.DataSource = places;        lvPlaces.SelectedIndex = -1;        lvPlaces.DataBind();        pnlPlaces.Visible = true;        pnlStart.Visible = false;    }    protected void ReturnFromPlaces_Click(object sender, EventArgs e)    {        pnlPlaces.Visible = false;        pnlStart.Visible = true;    }    protected void ReturnFromDeals_Click(object sender, EventArgs e)    {        pnlCoupons.Visible = false;        pnlStart.Visible = true;    }    protected void btnImHereNow_Click(object sender, EventArgs e)    {        long PlaceId = Convert.ToInt32(hdPlaceId.Value);        string UserName = Membership.GetUser().UserName;        string WhatsHappening = txtWhatsHappening.Text;        double UserLat = Convert.ToDouble(Latitude.Value);        double UserLon = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        da.StoreUserAT(UserName, PlaceId, WhatsHappening,             UserLat, UserLon);    }    protected void lbImHereNowReturn_Click(object sender, EventArgs e)    {        pnlImHereNow.Visible = false;        pnlPlaces.Visible = true;    }    protected void lbBackToBeginning_Click(object sender, EventArgs e)    {        pnlStart.Visible = true;        pnlImHereNow.Visible = false;    }    protected void lbWhereIveBeen_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        pnlStart.Visible = false;        pnlIveBeenHere.Visible = true;        DataAccess da = new DataAccess();        lvWhereIveBeen.DataSource = da.UserATs(UserName, 0, 15);        lvWhereIveBeen.DataBind();    }    protected void lbIveBeenHereBack_Click(object sender, EventArgs e)    {        pnlIveBeenHere.Visible = false;        pnlStart.Visible = true;    }     protected void lbPlaceIveBeen_Click(object sender, EventArgs e)    {        LinkButton lb = (LinkButton)sender;        ListViewItem lvi = (ListViewItem)lb.Parent.Parent;        HiddenField hdATID = (HiddenField)lvi.FindControl("hdATID");        Int64 ATID = Convert.ToInt64(hdATID.Value);        DataAccess da = new DataAccess();        pnlIveBeenHere.Visible = false;        pnlPlaceIveBeen.Visible = true;        var plac = da.GetPlaceViaATID(ATID);        hdPlaceIveBeenPlaceId.Value = plac.PlaceId.ToString();        hdPlaceIveBeenLatitude.Value = plac.Latitude.ToString();        hdPlaceIveBeenLongitude.Value = plac.Longitude.ToString();        lblPlaceIveBeenName.Text = plac.Name;        lblPlaceIveBeenAddress.Text = plac.Address1;        lblPlaceIveBeenCity.Text = plac.City;        lblPlaceIveBeenState.Text = plac.Province.ProvinceName;        lblPlaceIveBeenZipCode.Text = plac.ZipCode;        lblPlaceIveBeenCountry.Text = plac.Country.Name;    }     protected void lbNotListed_Click(object sender, EventArgs e)    {        SetupAddPoint();        pnlPlaces.Visible = false;    }     protected void lbAddAPlace_Click(object sender, EventArgs e)    {        SetupAddPoint();    }     private void SetupAddPoint()    {        double lat = Convert.ToDouble(Latitude.Value);        double lon = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        var zip = da.WhereAmIAt(lat, lon);        if (zip.Count > 0)        {            var z0 = zip[0];            txtCity.Text = z0.City;            txtZipCode.Text = z0.ZipCode;            ddlProvince.ClearSelection();            if (z0.ProvinceId.HasValue == true)            {                foreach (ListItem li in ddlProvince.Items)                {                    if (li.Value == z0.ProvinceId.Value.ToString())                    {                        li.Selected = true;                        break;                    }                }            }        }        pnlAddPlace.Visible = true;        pnlStart.Visible = false;    }    protected void lbAddPlaceReturn_Click(object sender, EventArgs e)    {        pnlAddPlace.Visible = false;        pnlStart.Visible = true;        liPlaceAddMessage.Visible = false;        PlaceAddMessage.Text = String.Empty;    }    protected void lbPlaceIveBeenBack_Click(object sender, EventArgs e)    {        pnlIveBeenHere.Visible = true;        pnlPlaceIveBeen.Visible = false;            }    protected void lbPlaceIveBeenBeginning_Click(object sender, EventArgs e)    {        pnlPlaceIveBeen.Visible = false;        pnlStart.Visible = true;    }    protected string DisplayName(object val)    {        string strVal = Convert.ToString(val);         if (AppleIPhone.IsIPad())        {            ipd = iPhoneDevice.iPad;        }        if (AppleIPhone.IsIPhone())        {            ipd = iPhoneDevice.iPhone;        }        if (AppleIPhone.IsIPodTouch())        {            ipd = iPhoneDevice.iPodTouch;        }        return (iPhoneHelper.DisplayContentOnMenu(strVal, ipd));    }} iPhoneHelper.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; public enum iPhoneDevice{    iPhone, iPodTouch, iPad}/// <summary>/// Summary description for iPhoneHelper/// </summary>/// public class iPhoneHelper{ public iPhoneHelper() {  //  // TODO: Add constructor logic here  // } // This code is stupid in retrospect. Use css to solve this problem      public static string DisplayContentOnMenu(string val, iPhoneDevice ipd)    {        string Return = val;        string Elipsis = "...";        int iPadMaxLength = 30;        int iPhoneMaxLength = 15;        if (ipd == iPhoneDevice.iPad)        {            if (Return.Length > iPadMaxLength)            {                Return = Return.Substring(0, iPadMaxLength - Elipsis.Length) + Elipsis;            }        }        else        {            if (Return.Length > iPhoneMaxLength)            {                Return = Return.Substring(0, iPhoneMaxLength - Elipsis.Length) + Elipsis;            }        }        return (Return);    }}  Source code for the ViewStatePage: using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls; /// <summary>/// Summary description for BasePage/// </summary>#region Base class for a page.public class ViewStatePage : System.Web.UI.Page{     PageStatePersisterToDatabase myPageStatePersister;        public ViewStatePage()        : base()    {        myPageStatePersister = new PageStatePersisterToDatabase(this);    }     protected override PageStatePersister PageStatePersister    {        get        {            return myPageStatePersister;        }    } }#endregion #region This class will override the page persistence to store page state in a database.public class PageStatePersisterToDatabase : PageStatePersister{    private string ViewStateKeyField = "__VIEWSTATE_KEY";    private string _exNoConnectionStringFound = "No Database Configuration information is in the web.config.";     public PageStatePersisterToDatabase(Page page)        : base(page)    {    }     public override void Load()    {         // Get the cache key from the web form data        System.Int64 key = Convert.ToInt64(Page.Request.Params[ViewStateKeyField]);         Pair state = this.LoadState(key);         // Abort if cache object is not of type Pair        if (state == null)            throw new ApplicationException("Missing valid " + ViewStateKeyField);         // Set view state and control state        ViewState = state.First;        ControlState = state.Second;    }     public override void Save()    {         // No processing needed if no states available        if (ViewState == null && ControlState != null)            return;         System.Int64 key;        IStateFormatter formatter = this.StateFormatter;        Pair statePair = new Pair(ViewState, ControlState);         // Serialize the statePair object to a string.        string serializedState = formatter.Serialize(statePair);         // Save the ViewState and get a unique identifier back.        key = SaveState(serializedState);         // Register hidden field to store cache key in        // Page.ClientScript does not work properly with Atlas.        //Page.ClientScript.RegisterHiddenField(ViewStateKeyField, key.ToString());        ScriptManager.RegisterHiddenField(this.Page, ViewStateKeyField, key.ToString());    }     private System.Int64 SaveState(string PageState)    {        System.Int64 i64Key = 0;        string strConn = String.Empty,            strProvider = String.Empty;         string strSql = "insert into tblPageState ( SerializedState ) values ( '" + SqlEscape(PageState) + "');select scope_identity();";        SqlConnection sqlCn;        SqlCommand sqlCm;        try        {            GetDBConnectionString(ref strConn, ref strProvider);            sqlCn = new SqlConnection(strConn);            sqlCm = new SqlCommand(strSql, sqlCn);            sqlCn.Open();            i64Key = Convert.ToInt64(sqlCm.ExecuteScalar());            if (sqlCn.State != ConnectionState.Closed)            {                sqlCn.Close();            }            sqlCn.Dispose();            sqlCm.Dispose();        }        finally        {            sqlCn = null;            sqlCm = null;        }        return i64Key;    }     private Pair LoadState(System.Int64 iKey)    {        string strConn = String.Empty,            strProvider = String.Empty,            SerializedState = String.Empty,            strMinutesInPast = GetMinutesInPastToDelete();        Pair PageState;        string strSql = "select SerializedState from tblPageState where tblPageStateID=" + iKey.ToString() + ";" +            "delete from tblPageState where DateUpdated<DateAdd(mi, " + strMinutesInPast + ", getdate());";        SqlConnection sqlCn;        SqlCommand sqlCm;        try        {            GetDBConnectionString(ref strConn, ref strProvider);            sqlCn = new SqlConnection(strConn);            sqlCm = new SqlCommand(strSql, sqlCn);             sqlCn.Open();            SerializedState = Convert.ToString(sqlCm.ExecuteScalar());            IStateFormatter formatter = this.StateFormatter;             if ((null == SerializedState) ||                (String.Empty == SerializedState))            {                throw (new ApplicationException("No ViewState records were returned."));            }             // Deserilize returns the Pair object that is serialized in            // the Save method.            PageState = (Pair)formatter.Deserialize(SerializedState);             if (sqlCn.State != ConnectionState.Closed)            {                sqlCn.Close();            }            sqlCn.Dispose();            sqlCm.Dispose();        }        finally        {            sqlCn = null;            sqlCm = null;        }        return PageState;    }     private string SqlEscape(string Val)    {        string ReturnVal = String.Empty;        if (null != Val)        {            ReturnVal = Val.Replace("'", "''");        }        return (ReturnVal);    }    private void GetDBConnectionString(ref string ConnectionStringValue, ref string ProviderNameValue)    {        if (System.Configuration.ConfigurationManager.ConnectionStrings.Count > 0)        {            ConnectionStringValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString;            ProviderNameValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ProviderName;        }        else        {            throw new ConfigurationErrorsException(_exNoConnectionStringFound);        }    }    private string GetMinutesInPastToDelete()    {        string strReturn = "-60";        if (null != System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"])        {            strReturn = System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"].ToString();        }        return (strReturn);    }}#endregion AppleiPhone.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; /// <summary>/// Summary description for AppleIPhone/// </summary>public class AppleIPhone{ public AppleIPhone() {  //  // TODO: Add constructor logic here  // }     static public bool IsIPhoneOS()    {        return (IsIPad() || IsIPhone() || IsIPodTouch());    }     static public bool IsIPhone()    {        return IsTest("iPhone");    }     static public bool IsIPodTouch()    {        return IsTest("iPod");    }     static public bool IsIPad()    {        return IsTest("iPad");    }     static private bool IsTest(string Agent)    {        bool bl = false;        string ua = HttpContext.Current.Request.UserAgent.ToLower();        try        {            bl = ua.Contains(Agent.ToLower());        }        catch { }        return (bl);        }} Master page .cs: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls; public partial class MasterPages_iPhoneMaster : System.Web.UI.MasterPage{    protected void Page_Load(object sender, EventArgs e)    {            HtmlHead head = Page.Header;            HtmlMeta meta = new HtmlMeta();            if (AppleIPhone.IsIPad() == true)            {                meta.Content = "width=400,user-scalable=no";                head.Controls.Add(meta);             }            else            {                meta.Content = "width=device-width, user-scalable=no";                meta.Attributes.Add("name", "viewport");            }            meta.Attributes.Add("name", "viewport");            head.Controls.Add(meta);            HtmlLink cssLink = new HtmlLink();            HtmlGenericControl script = new HtmlGenericControl("script");            script.Attributes.Add("type", "text/javascript");            script.Attributes.Add("src", ResolveUrl("~/Scripts/iWebKit/javascript/functions.js"));            head.Controls.Add(script);            cssLink.Attributes.Add("rel", "stylesheet");            cssLink.Attributes.Add("href", ResolveUrl("~/Scripts/iWebKit/css/style.css") );            cssLink.Attributes.Add("type", "text/css");            head.Controls.Add(cssLink);            HtmlGenericControl jsLink = new HtmlGenericControl("script");            //jsLink.Attributes.Add("type", "text/javascript");            //jsLink.Attributes.Add("src", ResolveUrl("~/Scripts/jquery-1.4.1.min.js") );            //head.Controls.Add(jsLink);            HtmlLink appleIcon = new HtmlLink();            appleIcon.Attributes.Add("rel", "apple-touch-icon");            appleIcon.Attributes.Add("href", ResolveUrl("~/apple-touch-icon.png"));            HtmlMeta appleMobileWebAppStatusBarStyle = new HtmlMeta();            appleMobileWebAppStatusBarStyle.Attributes.Add("name", "apple-mobile-web-app-status-bar-style");            appleMobileWebAppStatusBarStyle.Attributes.Add("content", "black");            head.Controls.Add(appleMobileWebAppStatusBarStyle);    }     internal string FindPath(string Location)    {        string Url = Server.MapPath(Location);        return (Url);    }}

    Read the article

  • Complete Guide to Networking Windows 7 with XP and Vista

    - by Mysticgeek
    Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

    Read the article

  • Use ASP.NET 4 Browser Definitions with ASP.NET 3.5

    - by Stephen Walther
    We updated the browser definitions files included with ASP.NET 4 to include information on recent browsers and devices such as Google Chrome and the iPhone. You can use these browser definition files with earlier versions of ASP.NET such as ASP.NET 3.5. The updated browser definition files, and instructions for installing them, can be found here: http://aspnet.codeplex.com/releases/view/41420 The changes in the browser definition files can cause backwards compatibility issues when you upgrade an ASP.NET 3.5 web application to ASP.NET 4. If you encounter compatibility issues, you can install the old browser definition files in your ASP.NET 4 application. The old browser definition files are included in the download file referenced above. What’s New in the ASP.NET 4 Browser Definition Files The complete set of browsers supported by the new ASP.NET 4 browser definition files is represented by the following figure:     If you look carefully at the figure, you’ll notice that we added browser definitions for several types of recent browsers such as Internet Explorer 8, Firefox 3.5, Google Chrome, Opera 10, and Safari 4. Furthermore, notice that we now include browser definitions for several of the most popular mobile devices: BlackBerry, IPhone, IPod, and Windows Mobile (IEMobile). The mobile devices appear in the figure with a purple background color. To improve performance, we removed a whole lot of outdated browser definitions for old cell phones and mobile devices. We also cleaned up the information contained in the browser files. Here are some of the browser features that you can detect: Are you a mobile device? <%=Request.Browser.IsMobileDevice %> Are you an IPhone? <%=Request.Browser.MobileDeviceModel == "IPhone" %> What version of JavaScript do you support? <%=Request.Browser["javascriptversion"] %> What layout engine do you use? <%=Request.Browser["layoutEngine"] %>   Here’s what you would get if you displayed the value of these properties using Internet Explorer 8: Here’s what you get when you use Google Chrome: Testing Browser Settings When working with browser definition files, it is useful to have some way to test the capability information returned when you request a page with different browsers. You can use the following method to return the HttpBrowserCapabilities the corresponds to a particular user agent string and set of browser headers: public HttpBrowserCapabilities GetBrowserCapabilities(string userAgent, NameValueCollection headers) { HttpBrowserCapabilities browserCaps = new HttpBrowserCapabilities(); Hashtable hashtable = new Hashtable(180, StringComparer.OrdinalIgnoreCase); hashtable[string.Empty] = userAgent; // The actual method uses client target browserCaps.Capabilities = hashtable; var capsFactory = new System.Web.Configuration.BrowserCapabilitiesFactory(); capsFactory.ConfigureBrowserCapabilities(headers, browserCaps); capsFactory.ConfigureCustomCapabilities(headers, browserCaps); return browserCaps; } At the end of this blog entry, there is a link to download a simple Visual Studio 2008 project – named Browser Definition Test -- that uses this method to display capability information for arbitrary user agent strings. For example, if you enter the user agent string for an iPhone then you get the results in the following figure: The Browser Definition Test application enables you to submit a user-agent string and display a table of browser capabilities information. The browser definition files contain sample user-agent strings for each browser definition. I got the iPhone user-agent string from the comments in the iphone.browser file. Enumerating Browser Definitions Someone asked in the comments whether or not there is a way to enumerate all of the browser definitions. You can do this if you ware willing to use a little reflection and read a private property. The browser definition files in the config\browsers folder get parsed into a class named BrowserCapabilitesFactory. After you run the aspnet_regbrowsers tool, you can see the source for this class in the config\browser folder by opening a file named BrowserCapsFactory.cs. The BrowserCapabilitiesFactoryBase class has a protected property named BrowserElements that represents a Hashtable of all of the browser definitions. Here's how you can read this protected property and display the ID for all of the browser definitions: var propInfo = typeof(BrowserCapabilitiesFactory).GetProperty("BrowserElements", BindingFlags.NonPublic | BindingFlags.Instance); Hashtable browserDefinitions = (Hashtable)propInfo.GetValue(new BrowserCapabilitiesFactory(), null); foreach (var key in browserDefinitions.Keys) { Response.Write("" + key); } If you run this code using Visual Studio 2008 then you get the following results: You get a huge number of outdated browsers and devices. In all, 449 browser definitions are listed. If you run this code using Visual Studio 2010 then you get the following results: In the case of Visual Studio 2010, all the old browsers and devices have been removed and you get only 19 browser definitions. Conclusion The updated browser definition files included in ASP.NET 4 provide more accurate information for recent browsers and devices. If you would like to test the new browser definitions with different user-agent strings then I recommend that you download the Browser Definition Test project: Browser Definition Test Project

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

  • Blending the Sketchflow Action

    - by GeekAgilistMercenary
    Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps.  This blog entry covers some of those steps, which are the basic elements of any prototype.  I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future.  For now, I hope you enjoy this short walk through.  Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen.  The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624">   <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others.  In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation.  In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map.  When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens.  Once I was done I wanted to try out the deployment package.  The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear.  In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that.  When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing.  One can even copy them (such as via FTP) to a server location to share with others.  Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features.  To the top left is the navigation, which provides a clearly defined area of movement in a list.  To the center right is the actual prototype application.  I have placed lists of things and made edits.  On the left hand side is the highlight feature, which is available in the Feedback section of the lower left.  On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback.  This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers.  Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping.  It really is that easy.  So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

    Read the article

  • Oracle ADF Coverage at OOW

    - by Frank Nimphius
    Below is the schedule for all ADF related sessions at a glance. Note the Meet and greet session added for Wednesday Octiber 3rd from 4.30 pm to 5:30. Oracle ADF and Fusion Development General Session Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM General Session: The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud Marriott Marquis - Salon 8 12:15 PM - 1:15 PM General Session: Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology Moscone West - 3014 1:45 PM - 2:45 PM General Session: Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies Moscone West - 3002/3004 4:45 PM - 5:45 PM General Session: Building Mobile Applications with Oracle Cloud Moscone West - 2002/2004 Conference Session Mon 1 Oct, 2012 Time Title Location 12:15 PM - 1:15 PM Understanding Oracle ADF and Its Role in Oracle Fusion Moscone South - 306 1:45 PM - 2:45 PM Building Performant Oracle ADF Business Components to Meet Tomorrow’s Needs Marriott Marquis - Golden Gate C3 3:15 PM - 4:15 PM End-to-End Oracle ADF Development in Eclipse Marriott Marquis - Golden Gate C3 4:45 PM - 5:45 PM Classic Mistakes with Oracle Application Development Framework Marriott Marquis - Salon 7 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM One Size Doesn’t Fit All: Oracle ADF Architecture Fundamentals Marriott Marquis - Golden Gate C2 10:15 AM - 11:15 AM Oracle Business Process Management/Oracle ADF Integration Best Practices Marriott Marquis - Golden Gate C3 11:45 AM - 12:45 PM Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF Moscone South - 306 11:45 AM - 12:45 PM Secrets of Successful Projects with Oracle Application Development Framework Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM BPM, SOA, and Oracle ADF Combined: Patterns Learned from Oracle Fusion Applications Moscone West - 3003 1:15 PM - 2:15 PM The Future of Forms Is … Oracle Forms (and Friends) Moscone South - 306 5:00 PM - 6:00 PM Best Practices for Integrating SOAP and REST Service into Oracle ADF Marriott Marquis - Golden Gate C2 Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite Moscone West - 3001 10:15 AM - 11:15 AM Visualize This! Best Practices for Data Visualization in Desktop and Mobile Apps Marriott Marquis - Golden Gate C3 10:15 AM - 11:15 AM Set Up Your Oracle ADF Project and Development Team for Productivity: Seven Essential Tips Marriott Marquis - Golden Gate C2 11:45 AM - 12:45 PM How to Migrate an Oracle Forms Application to Oracle ADF Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Oracle ADF: Lessons Learned in Real-World Implementations Moscone South - 309 3:30 PM - 4:30 PM Oracle ADF Implementations Around the Globe: Best Practices Marriott Marquis - Golden Gate C2 3:30 PM - 4:30 PM Oracle Developer Cloud Services Marriott Marquis - Salon 7 4:30 PM - 5:30 PM Oracle JDeveloper and Oracle ADF: What’s New Hilton San Francisco - Continental Ballroom 5 5:00 PM - 6:00 PM Mobile Solutions for Oracle E-Business Suite Applications: Technical Insight Moscone West - 2020 5:00 PM - 6:00 PM Extending Social into Enterprise Applications and Business Processes Marriott Marquis - Golden Gate C3 5:00 PM - 6:00 PM The Tie That Binds: An Introduction to Oracle ADF Bindings Marriott Marquis - Golden Gate C2 Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Moscone West - 3003 11:15 AM - 12:15 PM Deep Dive into Oracle ADF: Advanced Techniques Marriott Marquis - Golden Gate C2 12:45 PM - 1:45 PM Monitor, Analyze, and Troubleshoot Your Oracle ADF Application Marriott Marquis - Golden Gate C2 2:15 PM - 3:15 PM Oracle WebCenter Portal: Creating and Using Content Presenter Templates Marriott Marquis - Golden Gate C2 HOL (Hands-on Lab) Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:45 PM - 2:45 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 4:45 PM - 5:45 PM Application Lifecycle Management with Oracle JDeveloper: Hands-on Lab Marriott Marquis - Salon 3/4 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 11:45 AM - 12:45 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:15 PM - 2:15 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:30 PM - 4:30 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 11:15 AM - 12:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 12:45 PM - 1:45 PM Oracle ADF for Java EE Developers with Oracle Enterprise Pack for Eclipse Marriott Marquis - Salon 3/4 BOF (Birds-of-a-Feather) Mon 1 Oct, 2012 Time Title Location 6:15 PM - 7:00 PM How to Get Started with Oracle ADF Marriott Marquis - Club Room 7:15 PM - 8:00 PM Building Next-Generation Applications with Oracle ADF and Oracle BPM Marriott Marquis - Golden Gate C3 7:15 PM - 8:00 PM The Future of Oracle Forms: Upgrade, Modernize, or Migrate? Marriott Marquis - Golden Gate C2 7:15 PM - 8:00 PM Oracle ADF Faces: One Site for Many Devices Marriott Marquis - Golden Gate C1 - User Group Forum (Sunday Only) Sun 30 Sept, 2012 Time Title Location 9:00 AM - 10:00 AM Oracle ADF Immersion: How an Oracle Forms Developer Immersed Himself in the Oracle ADF World Moscone South - 305 10:15 AM - 11:15 AM Deploy with Joy: Using Hudson to Build and Deploy Your Oracle ADF Applications Moscone South - 305 11:30 AM - 12:30 PM ADF EMG User Group: A Peek into the Oracle ADF Architecture of Oracle Fusion Applications Moscone South - 305 12:45 PM - 3:45 PM ADF EMG User Group: Oracle Fusion Middleware Live Application Development Demo Moscone South - 305 3:15 PM - 4:15 PM Mobile Development with Oracle JDeveloper and Oracle ADF Moscone West - 2010 Demos Demo Location Developer Moscone North, Upper Lobby - N-002 Oracle ADF Mobile Development Moscone North, Upper Lobby - N-001 Oracle Eclipse Projects Hilton San Francisco, Grand Ballroom - HHJ-008 Oracle Enterprise Pack for Eclipse Moscone South, Right - S-208 Oracle JDeveloper and Oracle ADF Moscone South, Right - S-207 Exhibits 0 Exhibitor Location Accenture Moscone South - 1813 Moscone South - 2221 Infosys Moscone South - 1701 Moscone South - SMR-005 Innowave Technology Moscone South - 2309 ODTUG Moscone West, Level 2 Lobby - Kiosk in the User Groups Pavilion Oracle ADF Developers Meet Up Wednesday, Oct 03 Time Activity Location 4:30 PM - 5:30 PM Stop by the OTN Lounge and meet other Oracle ADF & Fusion developers as well as product managers and engineers who work on Oracle ADF, ADF Mobile and ADF Essentials. Feedback and questions welcome, or simply stop by and say ‘hi!’ and enjoy free beer. OTN Lounge

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Java Embedded @ JavaOne: Q & A

    - by terrencebarr
    There has been a lot of interest in Java Embedded @ JavaOne since it was announced a short while ago (see my previous post). As this is a new conference we did get a number of questions regarding the conference. So we put together a brief Q & A on audience focus, dates, registrations, pricing, submissions, etc. Hope this helps and, remember, the Call for Papers ends next week, Jul 18th 2012! Cheers, – Terrence    Java Embedded @ JavaOne : Q & A  Q. Where can I learn more about “Java Embedded @ JavaOne”? A. Please visit: http://oracle.com/javaone/embedded Q. What is the purpose of “Java Embedded @ JavaOne”? A. This net-new event is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. Q. What broad audiences would benefit by attending “Java Embedded @ JavaOne”? A. Java licensees; Government agencies; ISVs, Device Manufacturers; Service Providers such as Telcos, Utilities, Healthcare, Energy, Smart Grid/Smart Metering; Automotive/Telematics; Home/Building Automation; Factory Automation; Media/TV; and Payment vendors. Q. What business titles would benefit by attending “Java Embedded @ JavaOne”? A. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads). Q. When is “Java Embedded @ JavaOne” taking place? A. The event takes place on Wednesday, Oct. 3th through Thursday, Oct. 4th. Q. Where is “Java Embedded @ JavaOne” taking place? A. The event takes place in the Hotel Nikko. Q. Won’t “Java Embedded @ JavaOne” impact the flagship JavaOne conference since the Hotel Nikko is one of the 3 flagship JavaOne conference’s venue hotels? A. No. Separate space in the Hotel Nikko will be used for “Java Embedded @ JavaOne” and will in no way impact scale and scope of the flagship JavaOne conference’s content mix. Q. Will there be a call for papers for “Java Embedded @ JavaOne”? A. Yes.  The call for papers has started but is ONLY for business focused submissions. Q. What type of business submissions can I make for “Java Embedded @ JavaOne”? A. We are accepting 3 types of business submissions: Best Practices: Java Embedded business solutions, methods, and techniques that consistently show results superior to those achieved with other means, as well as discussions on how Java Embedded can improve business operations, and increase competitive differentiation and profitability. Case Studies: Discussions with Oracle customers and partners that describe the unique business drivers that convinced them to implement Java Embedded as part of an infrastructure technology mix. The discussions will highlight the issues they faced, the decision making involved, and the implementation choices made to create value and improve business differentiation. Panel: Moderator-driven open discussion focused on the emerging opportunities Java Embedded offers businesses, as well as other topics such as strategy, overcoming common challenges, etc. Q. What is the call for papers timeline for “Java Embedded @ JavaOne”? A. The timeline is as follows: CFP Launched – June 18th Deadline for submissions – July 18th Notifications (Accepts/Declines) – week of July 29th Deadline for speakers to accept speaker invitation – August 10th Presentations due for review – August 31st Q. Where can I find more call for paper details for “Java Embedded @ JavaOne”? A. Please go to: http://www.oracle.com/javaone/embedded/call-for-papers/information/index.html Q. How much does it cost to attend “Java Embedded @ JavaOne”? A. The cost to attend is: $595.00 U.S. — Early Bird (Launch date – July 13, 2012) $795.00 U.S. — Pre-Registration (July 14 – September 28, 2012) $995.00 U.S. — Onsite Registration (September 29 – October 4, 2012) Q. Can an attendee of the flagship JavaOne event and Oracle OpenWorld attend “Java Embedded @ JavaOne”? ?A. Yes.  Attendees of both the flagship JavaOne event and Oracle OpenWorld can attend “Java Embedded @ JavaOne” by purchasing a $100.00 U.S. upgrade to their full conference pass. Filed under: Mobile & Embedded Tagged: Call for Papers, Java Embedded @ JavaOne, JavaOne San Francisco

    Read the article

  • Test Drive Windows 7 Online with Virtual Labs

    - by Matthew Guay
    Did you miss out on the Windows 7 public beta and want to try it out before you actually make the leap and upgrade? Maybe you want to learn how to deploy new features in a business environment. Here’s how you can test drive Windows 7 directly from your browser. Whether you manage 10,000 desktops or simply manage your own laptop, it’s usually best to test out a new OS before installing it.  If you’re upgrading from Windows XP you may find many things unfamiliar.  Microsoft has setup a special Windows 7 Test Drive website with resources to help IT professionals test and deploy Windows 7 in their workplaces.  This is a great resource to try out Windows 7 from the comfort of your browser, and look at some of the new features without even installing it. Please note that the online version is not nearly as responsive as a full standard install of Windows 7.  It also does not run the full Aero interface or desktop effects, and may refresh slowly depending on your Internet connection.  So don’t judge Windows 7’s performance based on this virtual lab, but use it as a way to learn more about Windows 7 without installing it. Getting Started To test drive Windows 7, visit Microsoft’s Windows 7 Test Drive website (link below).  You will need to run the Windows 7 Test Drive in Internet Explorer, as it requires Active X support.  We received this error when attempting to run the Test Drive in Firefox: Now, click the “Take a Test Drive” link on the bottom left of the page. This site includes several test drives to demonstrate different features of Windows 7 and its related ecosystem of products including Windows Server 2008 R2, some of which, including the XP Mode test drive, are not yet ready.  For this test, we selected the MED-V Test drive, as this includes Office 2007 and 2010 so you can test them in Windows 7 as well.  Simply select the test drive you want, and click “Try it now!”   If you haven’t run a Windows test drive before, you will be asked to install an ActiveX control.  Click the link to install. Click the yellow bar at the top of the page in Internet Explorer, and select to Install the add-on.  You may have to approve a UAC prompt to finish the install. Once this is finished, click the link on the bottom of the page to return to your test drive.  The test drive page should automatically refresh; if it doesn’t, click refresh to reload it. Now the test drive will load the components.   Once its fully loaded, click the link to launch Windows 7 in a new window. You may see a prompt warning that the server may have been impersonated.  Simply click Yes to proceed. The test lab will give you some getting started directions; click Close Window when you’re ready to try out Windows 7. Here’s the default desktop in the Windows 7 test drive.  You can use it just like a normal Windows computer, but do note that it may function slowly depending on your internet connection.   This test drive includes both Office 2007 and Office 2010 Tech Preview, so you can try out both in Windows 7 as well. You can try out the new Windows 7 applications such as the reworked Paint with the Ribbon interface from Office. Or you can even test the newest version of Media Center, though it will warn you that it may not function good with the down-scaled graphics in the test drive.   Most importantly, you can try out the new features in Windows 7, such as Jumplists and even Aero Snap.  Once again, these features will not function the quickest, but it does let you test them out. While working with the Virtual Lab, there are different tasks it walks you through. You can also download a copy of the lab manual in PDF format to help you navigate through the various objectives. The test drive system is running Microsoft Forefront Security, the enterprise security solution from which Microsoft Security Essentials has adapted components from. Conclusion These virtual labs are great for tech students, or those of you who want to get a first-hand trial of the new features. Also, if you’re not sure on how to deploy something and want to practice in a virtual environment, these labs are quite valuable.While these labs are geared toward IT professionals, it’s a good way for anyone to try out Windows 7 features from the comfort of your current computer. Test Drive Windows 7 Similar Articles Productive Geek Tips Mount Multiple ISO Images Using Virtual CloneDriveHow To Delete a VHD in Windows 7Keyboard Shortcuts for VMware WorkstationMount an ISO image in Windows 7 or VistaHow To Turn a Physical Computer Into A Virtual Machine with Disk2vhd TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

    Read the article

  • Linux-Containers — Part 1: Overview

    - by Lenz Grimmer
    "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

    Read the article

  • Computer Networks UNISA - Chap 12 &ndash; Networking Security

    - by MarkPearl
    After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

    Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >