Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 611/783 | < Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >

  • Debugging Samba/CUPS printer sharing with Windows

    - by mrdrbob
    I've got a HP Deskjet hooked up to a Slackware 12.2 box. I've got CUPS set up and can print a test page from the box just fine. I've also got Samba set up and have a couple file shares that work fine. I'm trying to share that HP Deskjet out via Samba, but I can't get it to show up in any Windows system. I see the server and its file shares in Windows networking, but when I open the Printers, no printer shows up. Running net view \\servername from the command line lists the file shares, but no printers. Here's the pertinent part of my smb.conf, if that helps: [global] workgroup = HOMENET security = share hosts allow = 192.168.1. 192.168.2. 127. load printers = yes printcap name = cups printing = cups log file = /var/log/samba.%m max log size = 50 [printers] comment = All Printers path = /var/spool/samba browseable = no public = yes writable = no printable = yes guest only = yes Can anyone give me some pointers as to where to start looking for potential causes? Update: Running testparm shows no errors. Here's the output (minus the file shares): [global] workgroup = HOMENET security = SHARE log file = /var/log/samba.%m max log size = 50 printcap name = cups hosts allow = 192.168.1., 192.168.2., 127. [printers] comment = All Printers path = /var/spool/samba guest only = Yes guest ok = Yes printable = Yes browseable = No

    Read the article

  • Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

    - by David Osborn
    I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

    Read the article

  • Providing access to a Samba server for VPN clients

    - by Kamil Kisiel
    We have some Windows users that connect to our network via VPN from home. They need to be able to connect to our Samba server and access a mapped network drive just as they do as when they are on our LAN. The complication is that VPN clients are placed on a subnet other than our office LAN, and behind a firewall. What's the easiest way for me to allow them to still connect to the network share? The solutions I've currently seen involve setting up a WINS server for name resolution purposes and then tunnelling a bunch of the NetBIOS stuff through the firewall. However that means I'd have to set up the VPN DHCP server to hand out the WINS address, something I'm not even sure is possible on the Cisco hardware we have. I'm thinking there must be an easier way. Should I use an LMHOSTS file? Or just map by IP address? Also, I'm not terribly familiar with Windows networking, so which ports would I need to pass through my firewall in order to get the file sharing through?

    Read the article

  • Multiple IPs on firewall, are these virtual interfaces or what?

    - by Jakobud
    We have 5 static IP addresses from our ISP: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 On our firewall box, the NIC that is connected to our cable modem, appears to have all 5 IP addresses set on it. A previous IT guy set this thing up, and I'm not sure exactly what he did. Are these virtual interfaces on this NIC or what? Here is my ip addr output for that NIC: rwd0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff inet XXX.XXX.XXX.180/24 brd XXX.XXX.XXX.186 scope global rwd0 inet XXX.XXX.XXX.181/29 brd XXX.XXX.XXX.186 scope global rwd0:FWB9 inet XXX.XXX.XXX.182/29 brd XXX.XXX.XXX.186 scope global secondary rwd0:FWB10 inet XXX.XXX.XXX.183/29 brd XXX.XXX.XXX.186 scope global secondary rwd0:FWB11 inet XXX.XXX.XXX.184/29 brd XXX.XXX.XXX.186 scope global secondary rwd0:FWB12 inet6 fe80::250:8bff:fe61:5734/64 scope link valid_lft forever preferred_lft forever I'm a bit new to firewalls and networking so I'm just trying to figure out what he had going on here. I know he used Firewall Builder to configure the iptables rules, maybe that has something to do with the "FWB" I see in those names? So my questions are: What is going on here? Virtual Interfaces? Or something else? If we want to put in a second firewall in parallel with this firewall but we only want it to handle traffic to XXX.XXX.XXX.182, how do we get rid of the static XXX.XXX.XXX.182 address on this existing firewall box?

    Read the article

  • Samba and Windows 7

    - by John Gaughan
    I built a new computer with the intention of it being primarily a home file server. Here is my setup: one desktop with Windows 7 64 HP one laptop with Windows 7 64 HP one desktop with Kubuntu 11.10 (server) The two desktops use static IPs, and I have hostnames mapped in the HOSTS files on all three systems. I have the same username/password combo on all three systems. I have been trying for a while now to set up Samba so the Windows 7 systems can see and use it. Even if I can get the server to show up, Windows is unable to log in. One of the first things I did was to enable LMv2 authentication, which this version of Samba (3.5.11) supports. The workgroup is set correctly. I can normally see the server, but cannot authenticate. Windows homegroup is turned off. Pinging between machines works fine, and the two Windows 7 systems work together flawlessly. What I am trying to do is set up Samba to use peer to peer networking using NTLM security and user-mode authentication. According to the documentation this is possible, but there are no examples that I could find. In all the googling I have done, I see a lot of people asking how to set this up but it either works for someone else and not for me (no idea what I'm missing), or it doesn't work. Has anyone gotten this to work? Is there a place I could download a smb.conf that is set up to work in this environment?

    Read the article

  • How to troubleshoot connectivity when curl gets an *empty response*

    - by chad
    I want to know how to proceed in troubleshooting why a curl request to a webserver doesn't work. I'm not looking for help that would be dependent upon my environment, I just want to know how to collect information about exactly what part of the communication is failing, port numbers, etc. chad-integration:~ # curl -v 111.222.159.30 * About to connect() to 111.222.159.30 port 80 (#0) * Trying 111.222.159.30... connected * Connected to 111.222.159.30 (111.222.159.30) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.19.0 (x86_64-suse-linux-gnu) libcurl/7.19.0 OpenSSL/0.9.8h zlib/1.2.3 libidn/1.10 > Host: 111.222.159.30 > Accept: */* > * Empty reply from server * Connection #0 to host 111.222.159.30 left intact curl: (52) Empty reply from server * Closing connection #0 So, I understand that an empty response means that curl didn't get any response from the server. No problem, that's precisely what I'm trying to figure out. But what more specific info can I derive from cURL here? It was able to successfully "connect", so doesn't that involve some bidirectional communication? If so, then why does the response not come also? Note, I've verified my service is up and returning responses. Note, I'm a bit green at this level of networking, so feel free to provide some general orientation material.

    Read the article

  • Windows cant repair even with sfc /scannow

    - by GeekyDewd
    Clean install of windows 8, then installed the windows 8.1 update (after all other updates). CBS Log: CBS Log on Google Drive Important pieces of the log: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:38, Info CSI 00000505 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000506 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:40, Info CSI 00000507 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000508 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:35:43, Info CSI 00000509 [DIRSD OWNER WARNING] Directory [ml:520{260},l:138{69}]"\??\C:\WINDOWS\System32\WindowsPowerShell\v1.0\Modules\NetSecurity\en" is not owned but specifies SDDL in component Networking-MPSSVC-WMI.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral And: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:12, Info CSI 00000888 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 00000889 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:13, Info CSI 0000088a [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 0000088b [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:42:13, Info CSI 0000088c [SR] Repair complete

    Read the article

  • Cooling for a small server room

    - by John Zwinck
    I have a server room about 12 feet square with an unfinished ceiling (exposed ducts and wiring). It houses a few servers (about ten, 1U and 2U) and some networking gear (four 1U switches, three routers, three modems, two cable boxes). With the door closed, it runs around 80 degrees Fahrenheit with half the servers turned on. When I turned on all the servers it reached 86 before I chickened out and propped the door open. The room is adjacent to air-conditioned office space, but does not itself have dedicated air conditioning. The ventilation for this room seems to be limited to one duct coming in at ceiling level, with a powered fan to draw air in, and one duct at ceiling level to allow air to flow out (it seems like it may just go into the drop ceiling cavity in the adjacent room). The adjacent office space stays fairly cool, but I'd prefer not to leave the door propped open all the time. There is both 110v and 208v service in the room, and plenty of power available. But there are no windows, and no floor drains (in a pinch we might be able to run a condensation hose through a small hole we'd drill in the wall to a nearby sink area, but only if absolutely necessary). I've considered portable A/C units, but I'm not sure on sizing and a lot less sure how we would run the exhaust hose(s). I suppose we could point one at the existing room exhaust duct (air return), but substantially modifying the duct is probably a no-no. I've also considered installing a fan box in the door of the room, but I'm concerned that this will only drop the temperature a little. Even right now, with all the equipment on, the room is at 83 degrees with the door open. And the main building A/C turns off daily at 6 PM to conserve energy, so the adjacent room temperature rises at night. How would you cool this room? Let's say the goal is to bring the temperature with everything running from a steady state of around 90 degrees down to 75 (equivalently, to offset the heat produced by ten 1U servers).

    Read the article

  • Domain joined computer unable to access servers through VPN

    - by kscott
    Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

    Read the article

  • cPanel web servers mounting home partition to a NAS or SAN

    - by Scott
    I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

    Read the article

  • Servers in DMZ will not communicate with each other

    - by Tukaro
    (Full disclosure: I rate barely above "noob" when it comes to networking.) My workplace recent got a new web server. Since we're nearing the end of an overhaul of our website, we're doing a slooooow migration between the old web server and the new one. The old webserver (we'll call it SERVOLD) is Windows Server 2008 with IIS 7. It does not have SQL Server installed. The new server (SERVNEW) is Windows Server 2008 R2, IIS 7.5, with the same version of SQL Server installed. Both are located in the DMZ for our network, and both have their own outward-facing IP address (.3 and .4, respectively). Each server can communicate fine with computers within the domain (not in the DMZ), and those same computers have no trouble communicating with either server. Both servers are also accessible from the internet just fine. However, no matter what, these two servers just refuse to recognize each other. They have the same Workgroup name listed (WORKGROUP), and I thought that would be enough for them to recognize each other. What needs to happen such that I can get these two servers to communicate with each other? We want to do a gradual roll-over to the new website (new one uses ASP.NET, old one uses CFMX), so being able to use one database between both servers is a necessity. Thanks!

    Read the article

  • Can't do more than one activity at a time after switching modems

    - by vallorn
    I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

    Read the article

  • Getting started with webserver clustering.

    - by Ernie
    I work for a small ISP, and we host about 250 domains and all the stuff that goes along with that: DNS, mail, spam filtering, and backups. Currently, we have separate DNS servers (two of them) and mail servers (outgoing mail is actually on the secondary DNS server, but was previously on its own server). In the past, this was done as an insurance measure. The last thing we need is for some doofus (usually yours truly) to hose a server, taking out DNS and mail right along with it, or for spammers to jam our incoming SMTP server, preventing outgoing mail from being sent too. In the past, this was a problem, and our servers were set up the way they are now to combat it. However, clustering solutions like Sun's Cobalt RAQ (in days of olde) and Virtualmin appear to cater to an all-in-one approach, then deal with failures through redundant servers. I have avoided this thus far, but we've been using Virtualmin on our web server for a while now, and I'd like to expand into using it for a high availability cluster. Our networking partner has recently built a datacenter that has eliminated all of our other bugaboos like network, cooling, and power issues, so now the only thing left to go wrong is me hosing a server, which happened earlier this month. One of the bigger reasons we've avoided going this route is because our hardware requirements aren't particularly high. One server easily handles all the sites we host (most of them are flat sites). Also, load-balancing routers tend to be expensive and complicated. All that I'm really expecting to do is building a two-node cluster for redundancy so that when I hose a server (however rare that might be), we're not out for 8-12 hours while I rebuild it. What I need to know is how to get started, and if I'm really in a position to bother with this kind of thing at all.

    Read the article

  • LAMP server VM issues

    - by nullArray
    After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

    Read the article

  • Datacenter IP Addressing and DNS Management

    - by user65248
    Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

    Read the article

  • Debugging Samba/CUPS printer sharing with Windows

    - by mrdrbob
    I've got a HP Deskjet hooked up to a Slackware 12.2 box. I've got CUPS set up and can print a test page from the box just fine. I've also got Samba set up and have a couple file shares that work fine. I'm trying to share that HP Deskjet out via Samba, but I can't get it to show up in any Windows system. I see the server and its file shares in Windows networking, but when I open the Printers, no printer shows up. Running net view \\servername from the command line lists the file shares, but no printers. Here's the pertinent part of my smb.conf, if that helps: [global] workgroup = HOMENET security = share hosts allow = 192.168.1. 192.168.2. 127. load printers = yes printcap name = cups printing = cups log file = /var/log/samba.%m max log size = 50 [printers] comment = All Printers path = /var/spool/samba browseable = no public = yes writable = no printable = yes guest only = yes Can anyone give me some pointers as to where to start looking for potential causes? Update: Running testparm shows no errors. Here's the output (minus the file shares): [global] workgroup = HOMENET security = SHARE log file = /var/log/samba.%m max log size = 50 printcap name = cups hosts allow = 192.168.1., 192.168.2., 127. [printers] comment = All Printers path = /var/spool/samba guest only = Yes guest ok = Yes printable = Yes browseable = No

    Read the article

  • Disable IPv6 on Debian VPS (Virtuozzo!)

    - by chris_l
    I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case. Update Maybe I should add, that I can use iptables and everything normally (I'm root on the VPS), but I can't make changes to the kernel or load kernel modules because of the way Virtuozzo works (shared kernel). lsmod always returns nothing. I can't call ip6tables -L (it says that I need to insmod, or that the kernel would have to be upgraded). I don't think, that changes to /etc/modprobe.d/aliases would have any effect, or do they? Networking Config? I thought, that maybe I can turn IPv6 off from /etc/network/... Is that possible? I just see, that they've set up avahi, so I should probably change the setting use-ipv6=yes to "no" in /etc/avahi/avahi.conf (?) Has anybody already tried this solution, and can I rely on it? I don't know too much about avahi. Would it actually have any effect? Or could it even bring my entire interface down, once IPv6 is enabled by the kernel?

    Read the article

  • VNC server failed to start CentOS

    - by Shaun
    I followed a tutorial on how to install and get VNCserver to run on CentOS 6 (since freenx isnt supported yet) and I keep getting Starting VNC server: 1:user [FAILED] How do I figure out whats going on here? Im new to Linux/CentOS and im trying to get RDP going so I can step away from SSH as much as possible (you know us Windows users love our pretty GUI's). So, where is the error log at and how do I find it? Or maybe someone else has experienced this and knows the solution based on the simple error given? After running in debug mode, here is my error + . /etc/init.d/functions ++ TEXTDOMAIN=initscripts ++ umask 022 ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin ++ export PATH ++ '[' -z '' ']' ++ COLUMNS=80 ++ '[' -z '' ']' +++ /sbin/consoletype ++ CONSOLETYPE=pty ++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']' ++ . /etc/profile.d/lang.sh ++ unset LANGSH_SOURCED ++ '[' -z '' ']' ++ '[' -f /etc/sysconfig/init ']' ++ . /etc/sysconfig/init +++ BOOTUP=color +++ RES_COL=60 +++ MOVE_TO_COL='echo -en \033[60G' +++ SETCOLOR_SUCCESS='echo -en \033[0;32m' +++ SETCOLOR_FAILURE='echo -en \033[0;31m' +++ SETCOLOR_WARNING='echo -en \033[0;33m' +++ SETCOLOR_NORMAL='echo -en \033[0;39m' +++ PROMPT=yes +++ AUTOSWAP=no +++ ACTIVE_CONSOLES='/dev/tty[1-6]' +++ SINGLE=/sbin/sushell ++ '[' pty = serial ']' ++ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d' + '[' -r /etc/sysconfig/vncservers ']' + . /etc/sysconfig/vncservers ++ VNCSERVERS='1:larry 2:moe 3:curly' ++ VNCSERVERARGS[1]='-geometry 800x600' ++ VNCSERVERARGS[2]='-geometry 640x480' ++ VNCSERVERARGS[3]='-geometry 640x480' + prog='VNC server' + RETVAL=0 + case "$1" in + start + '[' 0 '!=' 0 ']' + . /etc/sysconfig/network ++ NETWORKING=yes ++ HOSTNAME=vps.binaryvisionaries.com ++ DOMAINNAME=server.name ++ GATEWAYDEV=venet0 ++ NETWORKING_IPV6=yes ++ IPV6_DEFAULTDEV=venet0 + '[' yes = no ']' + '[' -x /usr/bin/vncserver ']' + '[' -x /usr/bin/Xvnc ']' + echo -n 'Starting VNC server: ' Starting VNC server: + RETVAL=0 + '[' '!' -d /tmp/.X11-unix ']' + for display in '${VNCSERVERS}' + SERVS=1 + echo -n '1:larry ' 1:larry + DISP=1 + USER=larry + VNCUSERARGS='-geometry 800x600' + runuser -l larry -c 'cd ~larry && [ -r .vnc/passwd ] && vncserver :1 -geometry 800x600' + RETVAL=1 + '[' 1 -eq 0 ']' + break + '[' -z 1 ']' + '[' 1 -eq 0 ']' + failure 'vncserver start' + local rc=1 + '[' color '!=' verbose -a -z '' ']' + echo_failure + '[' color = color ']' + echo -en '\033[60G' + echo -n '[' [+ '[' color = color ']' + echo -en '\033[0;31m' + echo -n FAILED FAILED+ '[' color = color ']' + echo -en '\033[0;39m' + echo -n ']' ]+ echo -ne '\r' + return 1 + '[' -x /usr/bin/plymouth ']' + /usr/bin/plymouth --details + return 1 + echo + '[' 1 -eq 98 ']' + return 1 + exit 1

    Read the article

  • What are the attack vectors for passwords sent over http?

    - by KevinM
    I am trying to convince a customer to pay for SSL for a web site that requires login. I want to make sure I correctly understand the major scenarios in which someone can see the passwords that are being sent. My understanding is that at any of the hops along the way can use a packet analyzer to view what is being sent. This seems to require that any hacker (or their malware/botnet) be on the same subnet as any of the hops the packet takes to arrive at its destination. Is that right? Assuming some flavor of this subnet requirement holds true, do I need to worry about all the hops or just the first one? The first one I can obviously worry about if they're on a public Wifi network since anyone could be listening in. Should I be worried about what's going on in subnets that packets will travel across outside this? I don't know a ton about network traffic, but I would assume it's flowing through data centers of major carriers and there's not a lot of juicy attack vectors there, but please correct me if I am wrong. Are there other vectors to be worried about outside of someone listening with a packet analyzer? I am a networking and security noob, so please feel free to set me straight if I am using the wrong terminology in any of this.

    Read the article

  • VNC failure on Xen

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • VMware Server Host-Only Network Routing

    - by Chris
    I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

    Read the article

  • replica set with multiple primary nodes

    - by miguel
    I am trying to configure a replica set with three nodes: node A, B and C. I execute the rs.add()'s from node A and after that rs.status() shows that the three nodes are PRIMARY. Moreover node B and C have 0 pingMs. If I execute rs.status() from node B or C the only node listed is the self (As PRIMARY). I tried adding an arbiter but it didn't work (it behaved as the nodes B and C). I think this can be a networking problem but I can't figure it out. Edit: This is the output for netstat -anp|grep 27017: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN - tcp 0 0 10.0.1.211:55772 10.0.1.213:27017 TIME_WAIT - tcp 0 0 127.0.0.1:50509 127.0.0.1:27017 ESTABLISHED - tcp 0 0 127.0.0.1:27017 127.0.0.1:50509 ESTABLISHED - tcp 0 0 10.0.1.211:55774 10.0.1.213:27017 TIME_WAIT - tcp 0 0 10.0.1.211:55776 10.0.1.213:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39180 10.0.1.212:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39178 10.0.1.212:27017 TIME_WAIT - tcp 0 0 10.0.1.211:39176 10.0.1.212:27017 TIME_WAIT - unix 2 [ ACC ] STREAM LISTENING 3291267 - /tmp/mongodb-27017.sock the private ips for the node B and C are 10.0.1.212 and 10.0.1.213 respectively (they appear to have an established connection in the 27017 port according to the netstat output).

    Read the article

  • VNC on Xen failure

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • centos TCP/IP connection very slow

    - by yuli chika
    I have a VSP (centos6.1 64bit) with 4gb ram. It always runs well, but in recent few days, the server become slowly. open a small css file need 22 seconds(2kb). tested in home/office/phone with (IE,chrome,safari,firefox). see in firebug networking DNS Lookup ?4?ms Connecting ?21.18?s Sending 1?ms Waiting ?115?ms Receiving ?9?ms The connection cost 21.18 seconds I have checked all the log file, there have no error. top commond, still have free memory. top - 00:23:15 up 8 days, 3:57, 1 user, load average: 3.60, 3.42, 3.83 Tasks: 221 total, 4 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 19.3%us, 3.2%sy, 0.0%ni, 76.1%id, 1.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4194304k total, 3247724k used, 946580k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32357 mysql 15 0 3710m 835m 6268 S 34.5 20.4 39:14.40 mysqld 9780 apache 15 0 442m 59m 12m S 33.2 1.4 0:05.69 httpd 9842 apache 15 0 403m 26m 10m S 16.9 0.7 0:01.23 httpd 9847 apache 15 0 412m 45m 22m R 15.3 1.1 0:01.00 httpd 9834 apache 15 0 426m 46m 11m R 13.0 1.1 0:02.22 httpd 9891 apache 15 0 407m 43m 19m S 8.0 1.1 0:00.33 httpd 9845 apache 15 0 414m 51m 24m S 6.0 1.3 0:01.53 httpd 9827 apache 15 0 402m 28m 11m S 3.3 0.7 0:02.69 httpd 9768 apache 16 0 414m 51m 24m S 3.0 1.3 0:06.51 httpd 9889 root 15 0 211m 12m 8160 S 2.7 0.3 0:00.32 php 9702 apache 15 0 415m 55m 26m S 1.7 1.4 0:10.67 httpd 9844 apache 15 0 413m 47m 21m S 1.7 1.2 0:01.21 httpd 9697 apache 15 0 414m 51m 24m S 1.3 1.3 0:11.05 httpd 9778 apache 15 0 414m 53m 25m S 1.3 1.3 0:05.38 httpd 9772 apache 15 0 414m 51m 23m R 0.7 1.3 0:05.04 httpd 9823 apache 15 0 415m 50m 23m S 0.7 1.2 0:03.97 httpd 9837 apache 15 0 402m 27m 11m S 0.3 0.7 0:01.04 httpd Then, how to check where is the problem and fixed it? I haven't change and config files in these days. Thanks.

    Read the article

  • FTP Server on Centos 5.8 - Transfer fails randomly

    - by Diego
    Hi have ProFTPD runningon a brand new CentOS 5.8 server with Plesk, and its behaviour is inconsistent at best. I tried to transfer a directory from my PC, and every time I get a transfer failed on a random file. It's never the same one that fails, it just fails. Sometimes it's a .gif, sometimes it's a .css, sometimes it's a JPG. Of several hundred files, a dozen is always failing for no apparent reason. The error that I get is the following: COMMAND:> [27/11/2012 11:43:52] STOR main_border.gif [27/11/2012 11:43:53] 500 Invalid command: try being more creative ERROR:> [27/11/2012 11:43:53] Syntax error: command unrecognized. The above is just an example, the "command unrecognized" occurs with LIST and other commands as well. Here's the ProFTPD configuration, just in case: ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime Port 21 Umask 022 MaxInstances 30 ScoreboardFile /var/run/proftpd/scoreboard TransferLog /usr/local/psa/var/log/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.include Note: file /etc/proftpd.include is blank. The above is the default configuration set by Plesk 11. I don't know much of why is that way, my knowledge of Linux System Administration is very basic and the one of ProFTPD is a complete zero. Thanks in advance for the help. Update Issue experienced with CuteFTP and FileZilla. Update Replaced ProFTPd with PureFTPd, issue persists. Sometimes I get "command unrecognized", sometimes "failed to establish data connection". I'm starting to think that it could be a network issue, but I have completely zero knowledge of networking.

    Read the article

< Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >