Search Results

Search found 20883 results on 836 pages for 'wont say'.

Page 617/836 | < Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >

  • URL slugs: ideal length, and the real SEO effects of these slugs

    - by tattvamasi
    this question is addressed widely on SO and outside it, but for some reason, instead of taking it as a good load of great advice, all this information is confusing me. ** Problem ** I already had, on one of my sites, "prettified" urls. I had taken out the query strings, rewritten the URLS, and the link was short enough for me, but had a problem: the ID of the item or post in the URL isn't good for users. One of the users asked is there's a way to get rid of numbers, and I thought it was better for users to just see a clue of the page content in the URL. ** Solution ** With this in mind, I am trying with a section of the site.Armed with 301 redirects, some parsing work, and a lot of patience, I have added the URL slugs to some blog entries, and the slug of the URL reports the title of the article (something close to http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ ** Problems after Solution ** The problem, as I see it, is that now the URL of those blog articles is very descriptive for sure, but it is also impossible to remember. So, this brings me to the same issue I had with my previous problem: if numbers say nothing and can't be remembered, what's the use of these slugs? I prefer to see http://example.com/my-news/1/ than http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ To avoid forcing my user to memorize my URLS, I have added a script that finds the closest match to the URL you type, and redirects there. This is something I like, because the page now acts as a sort of little search engine, and users can play with the URLS to find articles. ** Open questions ** I still have some open questions, and don't seem to be able to find an answer, because answers tend to contradict one another. 1) How many characters should an URL ideally be long? I've read the magic number 115 and am sticking to that, but am not sure. 2) Is this really good for SEO? One of those blog articles I have redirected, with ID number in the URL and all, ranked second on Google. I've just found this question, and the answer seems to be consistent with what I think URL slug and SEO - structure (but see this other question with the opposite opinion) 3) To make a question with a specific example, would this URL risk to be penalized? Is it acceptable? Is it too long? StackOverflow seems to have comparably long URLs, but I'm not sure it's a winning strategy in my case. I just wanted to facilitate my users without running into Google's algorithms.

    Read the article

  • Insert Or update (aka Replace or Upsert)

    - by Davide Mauri
    The topic is really not new but since it’s the second time in few days that I had to explain it different customers, I think it’s worth to make a post out of it. Many times developers would like to insert a new row in a table or, if the row already exists, update it with new data. MySQL has a specific statement for this action, called REPLACE: http://dev.mysql.com/doc/refman/5.0/en/replace.html or the INSERT …. ON DUPLICATE KEY UPDATE option: http://dev.mysql.com/doc/refman/5.0/en/insert-on-duplicate.html With SQL Server you can do the very same using a more standard way, using the MERGE statement, with the support of Row Constructors. Let’s say that you have this table: CREATE TABLE dbo.MyTargetTable (     id INT NOT NULL PRIMARY KEY IDENTITY,     alternate_key VARCHAR(50) UNIQUE,     col_1 INT,     col_2 INT,     col_3 INT,     col_4 INT,     col_5 INT ) GO INSERT [dbo].[MyTargetTable] VALUES ('GUQNH', 10, 100, 1000, 10000, 100000), ('UJAHL', 20, 200, 2000, 20000, 200000), ('YKXVW', 30, 300, 3000, 30000, 300000), ('SXMOJ', 40, 400, 4000, 40000, 400000), ('JTPGM', 50, 500, 5000, 50000, 500000), ('ZITKS', 60, 600, 6000, 60000, 600000), ('GGEYD', 70, 700, 7000, 70000, 700000), ('UFXMS', 80, 800, 8000, 80000, 800000), ('BNGGP', 90, 900, 9000, 90000, 900000), ('AMUKO', 100, 1000, 10000, 100000, 1000000) GO If you want to insert or update a row, you can just do that: MERGE INTO     dbo.MyTargetTable T USING     (SELECT * FROM (VALUES ('ZITKS', 61, 601, 6001, 60001, 600001)) Dummy(alternate_key, col_1, col_2, col_3, col_4, col_5)) S ON     T.alternate_key = S.alternate_key WHEN     NOT MATCHED THEN     INSERT VALUES (alternate_key, col_1, col_2, col_3, col_4, col_5) WHEN     MATCHED AND T.col_1 != S.col_1 THEN     UPDATE SET         T.col_1 = S.col_1,         T.col_2 = S.col_2,         T.col_3 = S.col_3,         T.col_4 = S.col_4,         T.col_5 = S.col_5 ; If you want to insert/update more than one row at once, you can super-charge the idea using Table-Value Parameters, that you can just send from your .NET application. Easy, powerful and effective

    Read the article

  • SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

    - by Mladen Prajdic
    With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

    Read the article

  • Response: Agile's Second Chasm

    - by Malcolm Anderson
    William Pietri over at Agile Focus has written an interesting article entitled, "Agile’s Second Chasm (and how we fell in)" in which he talks about how agile development has fallen into a common trap where large companies are now spending a lot of money hiring agile (Scrum) consultants just so that they can say they are agile, but all the while avoiding any change that is required by Scrum.   It echoes the questions that I've been asking for a while, "Can a fortune 500 company actually do agile development?"  I'm starting to think that the answer is "usually not"   William ask 3 questions at the end of his article that I will answer here.   1) Have I seen agile development brought in and then preemptively customized (read: made into ScrummerFall)?   Yes, Scrum is hard and disruptive.  It's a spotlight on company dysfunction.  In a low trust environment like most fortune 500 companies Scrum will be subverted by anyone who has ever seen "transparency" translate into someone being laid off.   2) If I had to do it all over again, would I change anything?  No, this is a natural progression, but the agile principles are powerful enough, that the companies that don't adopt them will no longer be competitive and will start to fail.   3) Is this situation solvable?  I think it is.  I think that one of the issues is that you often see companies implementing Scrum, but avoiding the agile engineering practices.  I believe that you cannot do one without the other.  Scrum keeps the ship sailing in smooth deep waters.  The agile engineering practices keep the engine running smoothly and cleanly.  If you implement agile engineering practices without Scrum, you run the risk of ending up with a great running piece of software that is useful to no one.  On the other hand, implementing cargo-cult Scrum without the agile engineering practices and you end up (especially in a fortune 500 company) being steered in the right direction, but with your development practices coming to a dead halt because you have code that can not keep up with the changes in requirements.   If you are trying to do Scrum, make sure that you hire some agile engineering coaches, or else you may find your deveolpment engines grinding to a dead halt in the middle of the open ocean.

    Read the article

  • Rolling With the Punches

    - by D'Arcy Lussier
    So I’ve been tweeting the last little while “Rolling with the punches” and I’ve had some people ask me what that meant. Whether you’re running a conference (like I am this week), or a project, or a birthday party for a 2 year old, you need to be ready to handle those things that are unexpected. Risk mitigation can only go so far and its at those times that you need to become resourceful. So let me tell you what the last few days have been like. Today is the first day of Prairie Dev Con Winnipeg, a conference that I run. On Friday I was informed that my keynote speaker had lost his voice, one of my speakers had a family emergency and had to back out, and I got a warning from another that he was travelling over the weekend and if there was a storm or something he may not be able to get back by Monday for his talk. A storm didn’t happen, but their car did break down and he was delayed. Finally, Saturday night I took my printing order to Staples. It was at 5 and they closed at 6, and I had a bunch of surveys to be printed and cut. The girl working said that she’d have it ready by the next day (Sunday). Her intent was to come in the next morning and finish the job. Unfortunately, she had to be hospitalized that night and never made it into work…and never informed anyone of the remaining work. They found out at 3pm when I came to pick it up and there was no way they’d be able to cut everything in time. So how did we roll with these punches? - Miguel, my keynote speaker, was a trooper and was able to do the keynote but asked that his session get moved from Monday to Tuesday. This is why I wait until the last day before printing out schedules, they can change up to the event and even later. - I was able to move some sessions around to accommodate my stranded speaker and fill the empty slot from the speaker that couldn’t make it. - Staples was able to get me half the cut surveys so I took those and my wife will pick up the rest today. I altered how we’d collect session surveys, and actually I think it’ll work better. So all of this is to say, plan but also plan for what you can’t plan for – there will be things that happen that blindside you, that you’re not sure how to handle or solve. Stop, take a deep breath, and don’t feel that you need to limit yourself to the boundaries that you initially set for yourself. Roll with the punch and learn from it so that you can avoid the blow next time. Now, back to the conference! D

    Read the article

  • Windows Phone 7, taking the mobile out of mobile

    - by markritchie
    I’ll start off this blog entry with a little background which is necessary for you to understand my situation. I moved from to the UK to Germany about three years ago and while I can converse in German, English is still very much my first language and the language I want my content delivered in. I happily purchased a HTC HD7 when WP7 was released here in Germany thinking foolishly that Microsoft really would get internationalization and localization as it’s at the heart of their business and developer products. Overall I’m very happy with my WP7, the camera sucks but that’s more HTC’s fault that Microsoft, but other than that it’s a very promising platform. My problems started when I purchased my first app. Initially everything appeared to be fine and things were as smooth as things had been with my previous free applications, however about a month after I received an email from Zune informing me that the credit card that they had registered against my account had expired. No problem I foolishly thought; I’ll simply add a new one. I don’t want to bore you with the details of what I’ve been through other than to take the low-lights: trying numerous websites, posts on Microsoft Answers and a tweet to Microsoft Support all to no avail. Today somebody suggested that I call the Xbox support line in the UK as they had solved their billing problems this way. So I called up the Xbox support line since I hadn’t resolved the problem using the Zune portal to resolve my problem with my WP7 (anybody else thinks Microsoft might need some consolidation here). After being on the phone with a very friendly representative in Ireland I was informed that because my British credit card has a billing address in Germany they are unable to accept it as a credit card. Because my Live ID and Zune Tag are registered in the UK they cannot take my card. Their solution is that I have to create a new Zune Tag that has its locale in Germany and then associate it with my phone. Now, first thing I go to register for a Zune Tag with a German locale it very kindly switches into German for me, nothing quite like reading a EULA in a language you’re not fluent in. I’ve no idea how this will affect the apps that are available to me in the app store, and I’m pretty sure it means that all my Xbox live achievements will become history. And what if I was to move to say France at some point do I have to go through all this again? At the end of the day I’m trying to set something up so I can give them my money and they’re making it VERY difficult for me. Could you imagine walking into a book store when you were on holiday and being told by the clerk that they couldn’t take your credit card because you came from another country?

    Read the article

  • Ad-hoc reporting similar to Microstrategy/Pentaho - is OLAP really the only choice (is OLAP even sufficient)?

    - by TheBeefMightBeTough
    So I'm getting ready to develop an API in Java that will provide all dimensions, metrics, hierarchies, etc to a user such that they can pick and choose what they want (say, e.g., dimensions of Location (a store) and Weekly, and the metric Product Sales $), provide their choices to the api, and have it spit out an object that contains the answer to their question (the object would probably be a set of cells). I don't even believe there will be much drill up/down. The data warehouse the APIwill interface with is in a standard form (FACT tables, dimensions, star schema format). My question is, is an OLAP framework such as Mondrian the only way to achieve something akin to ad-hoc reporting? I can envisage a really large Cube (or VirtualCube) that contains most of the dimensions and metrics the user could ever want, which would give the illusion of ad-hoc reporting. The problem is that there is a ton of setup to do (so much XML) to get the framework to work with the data. Further it requires specific knowledge, such as MDX, and even moreso learning the framework peculiars (Mondrian API). Finally, I am not positive it will scale much better than simply making queries against a SQL database. OLAP to me feels like very old technology. Is performance really an issue anymore? The alternative I can think of would be dynamic SQL. If the existing tables in the data warehouse conform to a naming scheme (FACT_, DIM_, etc), or if a very simple config file/ database table containing config information existed that stored which tables are fact tables, which are dimensions, and what metrics are available, then couldn't the api read from that and assembly the appropriate sql query? Would this necessarily be harder than learning MDX, Mondrian (or another OLAP framework), and creating all the cubes? In general, I feel that OLAP is at the same time too powerful (supports drill up/down, complex functions) and outdated and am reluctant to base my architecture on it. However, I am unsure if the alternative(s), such as rolling my own ad-hoc reporting framework using dynamic SQL would remove any complexity while still fulfilling requirements, both functional and non-functional (e.g., scalability; some FACT tables have many millions of rows). I also wonder about other techniques (e.g., hive). Has anyone here tried to do ad-hoc reporting? Any advice? I expect this project to take a pretty long time (3 months min, but probably longer), so I just do not want to commit to an architecture without being absolutely sure of its pros and cons. Thanks so much.

    Read the article

  • High traffic chat - how to check if there is new message and show it for all users

    - by user2633999
    I already had question about this but obviously it was not accepted very well, apparently too long when it's actually more information so you could have given me better answer. Ok, I will be much clearer now. Best possible logic to develop scalable chat in terms of stability, storing/reading messages on chat, updating chat on new message for all users etc.? I have most of this developed, the logic I think I miss is -- check if there is new message and show it for all users. I have this implemented but it crashes the site due to its traffic of 300k-400k people, so that's my main question. The chat is PHP based and uses Pusher (www.pusher.com) for instant messaging but it lacks what I need because it's more like a websocket. I'm using hardcoded files to keep messages (want to avoid database as much as possible). It's a no extension type of file, I'm sure you know. I'm getting crash with $fp = fopen(..., "w"); // pretend ... is the path and filename fwrite($fp, $msg); //hardcode the message fclose($fp); where $msg is the message itself. I'm having 1 file per message. I show last 150 messages = 150 file accesses and reads, yeah it's too much I guess. I have better logic now which I'm pursuing and that is 1 file with last 50-100 messages at all time. Sure it should be much better. How does it crash, that's the trickiest part because everything seems ordinary, believe me it is difficult to determine what exactly crashes the site, but in like 5 minutes when I try to open the site it's gone, then I put the old content without chat and is back online again. I'm having jquery post every 1 second to check if there is new message. I'm using timestamp in a special file where I keep the time last message was sent and if ((time() - time in file) <= 2) = reload last 150 messages including the last one. Too much input/output, write/read or however to say it I think is what crashes the site.

    Read the article

  • git commit –m “CodePlex now supports Git!”

    Finally, yes, CodePlex now supports Git! Git has been one of the top rated requests from the CodePlex community for some time: Admittedly, when we launched CodePlex, we never expected that at some point we would be running a source control system originally invented by Linus Torvalds to use for the Linux kernel. Though I would also say, nobody would have thought the open source ecosystem would be as important to Microsoft as it has become now. Giving CodePlex users what they ask for and supporting their open source efforts has always been important to us, and we have a long list of improvements planned, so stay tuned as we have more up our sleeves! Why Git? So why Git? CodePlex already has Mercurial for distributed version control and TFS (which also supports subversion clients) for centralized version control. The short answer is that the CodePlex community voted, loud and clear, that Git support was critical. Additionally, we just like it, we use Git on our team every day and making the DVCS workflows more available to the CodePlex community is just the right thing to do. Forks and Pull Requests One of the capabilities that distributed version control systems, such as Mercurial and Git, enable is the Fork and Pull Request workflow.  Just like with Mercurial, projects configured to use Git enable Forking the source and submitting contributions back via Pull Requests. The Fork/Pull Request workflow is a key accelerator to many open source projects and you will see improvements in our support coming later this year. More Choice With the addition of Git, now CodePlex has three options when it comes to Open Source project hosting. Projects can now select between TFS, Mercurial, and Git. Each developer has their own preferences, and for some, centralized version control makes more sense to them. For others, DVCS is the only way to go. We’re equally committed to supporting both these technologies for our users. You can get started today by creating a new project or contribute to an existing project by creating a fork. For help on getting started with Git on CodePlex, see our help documentation here. If you would like to switch your project to use Git, please contact us at CodePlex Support with your project information, and we will be happy to help you out. We're Listening CodePlex is your community, and we want to deliver the experiences you need to have a successful open source project. We want your ideas and feedback to make CodePlex a great development community.  The issue tracker on CodePlex is publicly available. Add suggestions or vote up existing suggestions. And you can always find us on Twitter, I’m @mgroves84; follow us to keep up to date with our latest releases: @codeplex

    Read the article

  • What's a good way to get an IT internship? [closed]

    - by user1419715
    I'm a second year CS student who's worked really hard to build and expand my skills. I've spent the past week now trying to find a place to volunteer (i.e. work for FREE) so I can get a little bit of in-the-door experience with web development. I have a portfolio with several decent projects, a handful of languages and other hard/soft skills that employers constantly say they're clamoring for. I can't even get people to take my calls. This is me offering to work for them for FREE, remember. I'm in a reputable program at a respected school, get decent grades and...yeah, I've worked really hard to be presentable. On the rare occassions I actually get to speak to somebody at a design firm they hedge and do everything they can to get me off the phone. Nobody's ever expressed even the slightest interest in taking me on. The answer to the experience problem is supposed to be "you need to spend a year or two building up a big portfolio of projects on your own" so that employers will be impressed. I've done that. Websites, standalone apps, etc.. Nobody will even look at my resume, though. Question: Why does there seem to be so little interest in taking on upaid interns in the world of IT? Update: Sorry you all think I'm too aggressive or angry. It wasn't my intent to be a jerk to people while asking them for their opinions. That said, how would you feel if employer after employer turned you down cold when you offered yourself to them without asking for remuneration? One can't even get an unpaid job in this economy now, it seems. How am I going about my search? I find web firms in my area and contact them via email with a brief sales pitch of myself and a resume attached. Then a couple of days later I follow up with a phone contact. Nobody--anywhere--is advertising for interns of any kind. If there were I'm sure there'd be about 500 resumes per position, even unpaid. I've had good experiences in the past with cold-calling firms for actual paid jobs in other industries (hiring is a pain in the ass process and a call like this can show initiative while reducing a busy employer's need to do all the hiring overhead work), so I thought volunteering would work at least as well. My skills are pretty good for a CS student and include the usual suspects: HTML/CSS/Javascript, Python, Java, C, C#/.Net etc etc. I made a point on my resume to tie each ability claim to a project as well. Oh, and regarding the "working for free still costs the employer money" argument: that's an excellent point I hadn't though of. But it means...what? I have to pay the employer for the privilege of working there now?

    Read the article

  • How bad does it look to have left a job soon after starting? [closed]

    - by unitedgremlin
    I have a job I would like to leave. On advice from friends and parents I have stayed. Their primary concern is that it would look bad on my resume if I left only after a few months of joining. My concerns with the job are as follows: When I started it was preferred I provide and use my own equipment. Could be out of business in a few months from lack of cash flow Poor code quality: memory leaks and lack of error handling. The same mistakes continue to be made even though I have raised the issue. It has become evident that co-workers do not understand memory management rules of the platform and are not interested in learning them. Yet, there is still surprise from them when strange bugs continue to crop up. As a result don't feel I will learn from co-workers. Plus, fixing the the lingering bugs and trying to keep up on new feature development is like a game of whack-o-mole that never ends. I don't believe in the companies vision or its ability to execute on the ideas anymore. My ideas and suggestions for very small tweaks are quickly dismissed. And so more than half or so have come back as bugs that we end up needing to address. I have been told to wait on fixing bugs in codes until we can talk to the original author. I don't feel I am allowed to take initiative to just fix/change things and do what I think is best. Everything needs consensus even for a bug fix before any work is done. I am adopting a shut-up and just do what I am told approach to save myself from ulcers. Lots of meetings (I am personally not involved in all of them which is good) but the sheer amount reminds me of days at a big corporation. Why is everyone around me always meeting? It's a small company. I can count everyone on my toes and fingers. I can say with certainty I have no interest in working with any of them again. This is the first time I have truly worked with a group of so called "B and C players". Ultimately, I think it is my fault for not doing a better job evaluating the team and company before joining. But I have generated a better set of questions when probing companies in the future. My questions are: How bad does it look to have left a job soon (few months) after starting? What would be the best way to explain my concerns and reasons for leaving without badmouthing the company? Should I stick it out to what I believe will be the soon end of the company?

    Read the article

  • openGL textures in bitmap mode

    - by evenex_code
    For reasons detailed here I need to texture a quad using a bitmap (as in, 1 bit per pixel, not an 8-bit pixmap). Right now I have a bitmap stored in an on-device buffer, and am mounting it like so: glBindBuffer(GL_PIXEL_UNPACK_BUFFER, BFR.G[(T+1)%2]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, W, H, 0, GL_COLOR_INDEX, GL_BITMAP, 0); The OpenGL spec has this to say about glTexImage2D: "If type is GL_BITMAP, the data is considered as a string of unsigned bytes (and format must be GL_COLOR_INDEX). Each data byte is treated as eight 1-bit elements..." Judging by the spec, each bit in my buffer should correspond to a single pixel. However, the following experiments show that, for whatever reason, it doesn't work as advertised: 1) When I build my texture, I write to the buffer in 32-bit chunks. From the wording of the spec, it is reasonable to assume that writing 0x00000001 for each value would result in a texture with 1-px-wide vertical bars with 31-wide spaces between them. However, it appears blank. 2) Next, I write with 0x000000FF. By my apparently flawed understanding of the bitmap mode, I would expect that this should produce 8-wide bars with 24-wide spaces between them. Instead, it produces a white 1-px-wide bar. 3) 0x55555555 = 1010101010101010101010101010101, therefore writing this value ought to create 1-wide vertical stripes with 1 pixel spacing. However, it creates a solid gray color. 4) Using my original 8-bit pixmap in GL_BITMAP mode produces the correct animation. I have reached the conclusion that, even in GL_BITMAP mode, the texturer is still interpreting 8-bits as 1 element, despite what the spec seems to suggest. The fact that I can generate a gray color (while I was expecting that I was working in two-tone), as well as the fact that my original 8-bit pixmap generates the correct picture, support this conclusion. Questions: 1) Am I missing some kind of prerequisite call (perhaps for setting a stride length or pack alignment or something) that will signal to the texturer to treat each byte as 8-elements, as it suggests in the spec? 2) Or does it simply not work because modern hardware does not support it? (I have read that GL_BITMAP mode was deprecated in 3.3, I am however forcing a 3.0 context.) 3) Am I better off unpacking the bitmap into a pixmap using a shader? This is a far more roundabout solution than I was hoping for but I suppose there is no such thing as a free lunch.

    Read the article

  • Are there new flexible texteditors? [closed]

    - by RParadox
    Vi(m) and Emacs are almost 40 years old. Why are they still the standard, and what attempts have been made at coming up with a new flexible editor? Are there any features which can not be built into vim/emacs? My question is similar to this one: Time to drop Emacs and vi? No one had a suggestion, which surprises me. I would have thought that the core of a texteditor is very small and that people brew their own. Perhaps nobody wants to deal with supporting all the modes? Edit to clarify my question: Instead of writing modes and scripts I ask myself, why there is not a much lightweight project, which lets people custom the editor more directly? Vim has 365395 LOC (C lines all included), Emacs 1.5 million LOC. Why is there a project with say 50k LOC, which is the core, why people can use more freely? Perhaps there is such project, I haven't looked very far. I thought about putting together modules from Vim myself and experimenting with some ideas. The core of editing shouldn't be more than 10k? Vim has a lot optimizations which is really an overkill nowadays. Basically I'm looking for a code base for my own editor and Vi/Emacs are I believe not intended to be used in this way. Bill Joy said the following about vi. http://web.cecs.pdx.edu/~kirkenda/joy84.html The fundamental problem with vi is that it doesn't have a mouse and therefore you've got all these commands. In some sense, its backwards from the kind of thing you'd get from a mouse-oriented thing. I think multiple levels of undo would be wonderful, too. But fundamentally, vi is still ed inside. You can't really fool it. Its like one of those pinatas - things that have candy inside but has layer after layer of paper mache on top. It doesn't really have a unified concept. I think if I were going to go back - I wouldn't go back, but start over again.

    Read the article

  • The term "interface" in C++

    - by Flexo
    Java makes a clear distinction between class and interface. (I believe C# does also, but I have no experience with it). When writing C++ however there is no language enforced distinction between class and interface. Consequently I've always viewed interface as a workaround for the lack of multiple inheritance in Java. Making such a distinction feels arbitrary and meaningless in C++. I've always tended to go with the "write things in the most obvious way" approach, so if in C++ I've got what might be called an interface in Java, e.g.: class Foo { public: virtual void doStuff() = 0; ~Foo() = 0; }; and I then decided that most implementers of Foo wanted to share some common functionality I would probably write: class Foo { public: virtual void doStuff() = 0; ~Foo() {} protected: // If it needs this to do its thing: int internalHelperThing(int); // Or if it doesn't need the this pointer: static int someOtherHelper(int); }; Which then makes this not an interface in the Java sense anymore. Instead C++ has two important concepts, related to the same underlying inheritance problem: virtual inhertiance Classes with no member variables can occupy no extra space when used as a base "Base class subobjects may have zero size" Reference Of those I try to avoid #1 wherever possible - it's rare to encounter a scenario where that genuinely is the "cleanest" design. #2 is however a subtle, but important difference between my understanding of the term "interface" and the C++ language features. As a result of this I currently (almost) never refer to things as "interfaces" in C++ and talk in terms of base classes and their sizes. I would say that in the context of C++ "interface" is a misnomer. It has come to my attention though that not many people make such a distinction. Do I stand to lose anything by allowing (e.g. protected) non-virtual functions to exist within an "interface" in C++? (My feeling is the exactly the opposite - a more natural location for shared code) Is the term "interface" meaningful in C++ - does it imply only pure virtual or would it be fair to call C++ classes with no member variables an interface still?

    Read the article

  • PHP or C++? I just want to choose a language and focus on it!

    - by user19177
    I love C++, but I feel I don't know if I should focus on web, so PHP, or C++. It's just an hard choice because right now I want to focus on one language and don't want to switch it a few months later. With C++ I'd program in SDL, while with PHP I don't know yet. I am not a very advanced programmer but I know basics of programming and can get going very well if determined. The problem is I just don't know.. I'm like OK! I'll go for C++! Then a minute later, wait what if I went with C#? Why this that.. ! I've read milion threads about C vs VB C# Python Ruby etc, all of them which I could find! It got me nowhere. The problem is probably I need to know something from some experts I guess.. I'm sure I'm not the only one who feels/felt like I do right now yeah? Uhm... I guess I might help you with some details so your answer may be easier to write! ( And also, if you want to say something else which is not related to PHP or C++, you can do that, I've just got to the conclusion that C++ and PHP are the ones that are worth it but yeah. C# I've discarded due to some stuff I read which says in future the projects I'd start now could just be useless and stuff like that.. ) Ok well : I'm 18 years old, and I program as hobby right now, but I do hope to go to a programming college in future. ( That would be in 2 years ). Hmm, I like programming games, and I'm mostly bothered by the fact "this language could be useless to what I need to do" ( I don't know how to explain this feeling! ) I don't know which other details I could add... I hope you guys can help me choose my path, this is really stressing me I'm wasting my time not doing anything right now because I don't know which language to use..! Thanks!

    Read the article

  • How are software projects 'typically' managed/deployed

    - by rguilbault
    My company is evaluating adopting off-the-shelf ALM products to aid in our development lifecycle; we currently use our own homegrown solutions to manage requirements gathering, specification documentation, testing, etc. One of the issues I am having is that we have what we call a pipeline, which consists of particular stops: [Source] - [QC] - [Production] At the first stop, the developer works out a solution to some requested change and performs individual testing. When that process is complete (and peer review has been performed), our ALM system physically moves the affected programs from the [Source] runtime environment to the [QC] runtime environment. You can think of this as analogous to moving some web pages from the 'test' server to the 'live' server, where QC personnel can bang on the system and complain that the developer has it all wrong ;-) Once QC signs off that the changes are working, the system again moves the code along to the next stage, where additional testing is performed, etc. I have been searching the internet for a few days trying to find how the process is accomplished anywhere else -- I have read a bit about builds, automated testing, various ALM products, etc. but nowhere does any of this state how builds interact with initial change requests, what the triggers are, how dependencies are managed, how the various forms of testing are accommodated (e.g. unit testing, integration testing, regression testing), etc. Can anyone point me to any resources or attempt to explain (generically) how a change could/should be tracked and moved though the development lifecycle? I'd be very appreciative. To keep things consistent, let's say that we have a project called Calculator, which we want to add support for the basic trigonometric functions: sine, cosine and tangent. I'm open to reorganizing the company however we need to in order to accomplish due diligence testing and we can suppose that any tools are available for use (if that helps to illustrate the process). To start things off, I think I understand this much: we document the requirements, e.g.: support sine, cosine and tangent functions we create some type of change request/work order to assign to programming coding takes place, commits are made to version control peer review commences programmer marks the work order as completed? ... now what? How does QC do their thing? Would they perform testing before closing the 'work order'?

    Read the article

  • Wifi problems with Ubuntu 13.10

    - by Sparrowhawk4
    I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

    Read the article

  • Strangling the life out of Software Testing

    - by MarkPearl
    I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

    Read the article

  • 12.04 Booting into Terminal

    - by user170796
    To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

    Read the article

  • Visual Studio 2010/2012 Context Menus and a Keyboard

    - by SergeyPopov
    As a software developer, I spend a lot of time using Visual Studio. I have to say that I completely satisfied with Visual Studio generally. Nevertheless, sometimes Visual Studio starts annoying me. One issue which poisoned my existence for a long time is that context menu behavior in VS2010 is a little different than it was in VS2005/2008. Unfortunately, in VS2012 this behavior remains the same as in VS2010. So, what is the issue? Working with Visual Studio, I use the keyboard in most cases. I also use the Apps key on the keyboard to open context menus in the code editor. Moreover, long time ago I am got used to using some key sequences, and press the keys without even thinking. In VS2008, a mouse pointer position didn’t affect context menu navigation if I used the keyboard. Every time I opened a context menu I was sure that, for example, the "Apps, Down, Down, Enter, Up, Enter" key sequence always invoke "Organize Usings > Remove and Sort" function. But in VS2010, this behavior has been changed. If a mouse pointer is located over an opened context menu, the menu item under the mouse pointer becomes selected immediately! So, now the "Apps, Down, Down, Enter, Up, Enter" key sequence will not lead to expected results all the time. In some cases, the result may be a little scary. If you are using Visual SVN extension, this key sequence may invoke "Revert whole file" function. Of course, this is not a fatal problem because "Undo" function restores all the changes, but this behavior strongly annoys me. In Visual Studio 2012, context menu behavior is a little different than in VS2010, but a mouse pointer position still affects the keyboard navigation in the context menu, and this behavior is still annoying. I tried to find the way how to change this behavior, but I didn’t manage to find the answer quickly. Then I decided to go right though, so I wrote a small utility which fixes this issue. This utility watches for Apps key, and if the key is pressed in Visual Studio, the utility moves the mouse pointer to the top of the screen before opening the context menu. You can find binaries and the source code of this utility here: http://code.google.com/p/vs-ctx-menu-fix/downloads/list This utility works fine in Windows 7 and Windows 8 x64. I wrote the first version in January, 2011; now I just added Visual Studio 2012 support. I hope you will find this utility useful! :)

    Read the article

  • Reasons NOT to use JSF [closed]

    - by Vain Fellowman
    I am new to StackExchange, but I figured you would be able to help me. We're crating a new Java Enterprise application, replacing an legacy JSP solution. Due to many many changes, the UI and parts of the business logic will completely be rethought and reimplemented. Our first thought was JSF, as it is the standard in Java EE. At first I had a good impression. But now I am trying to implement a functional prototype, and have some really serious concerns about using it. First of all, it creates the worst, most cluttered invalid pseudo-HTML/CSS/JS mix I've ever seen. It violates every single rule I learned in web-development. Furthermore it throws together, what never should be so tightly coupled: Layout, Design, Logic and Communication with the server. I don't see how I would be able to extend this output comfortably, whether styling with CSS, adding UI candy (like configurable hot-keys, drag-and-drop widgets) or whatever. Secondly, it is way too complicated. Its complexity is outstanding. If you ask me, it's a poor abstraction of basic web technologies, crippled and useless in the end. What benefits do I have? None, if you think about. Hundreds of components? I see ten-thousands of HTML/CSS snippets, ten-thousands of JavaScript snippets and thousands of jQuery plug-ins in addition. It solves really many problems - we wouldn't have if we wouldn't use JSF. Or the front-controller pattern at all. And Lastly, I think we will have to start over in, say 2 years. I don't see how I can implement all of our first GUI mock-up (Besides; we have no JSF Expert in our team). Maybe we could hack it together somehow. And then there will be more. I'm sure we could hack our hack. But at some point, we'll be stuck. Due to everything above the service tier is in control of JSF. And we will have to start over. My suggestion would be to implement a REST api, using JAX-RS. Then create a HTML5/Javascript client with client side MVC. (or some flavor of MVC..) By the way; we will need the REST api anyway, as we are developing a partial Android front-end, too. I doubt, that JSF is the best solution nowadays. As the Internet is evolving, I really don't see why we should use this 'rake'. Now, what are pros/cons? How can I emphasize my point to not use JSF? What are strong points to use JSF over my suggestion?

    Read the article

  • MVC Can the model know ANYTHING about the view?

    - by AwDogsGo2Heaven
    I'm working on a game, and without getting into any details I am using MVC "patterns", "rules" or whatever you want to call it to make the game. The view includes everything needed to draw things on the screen, the controller passes input to the model. And the Model contains game logic. Here's my problem, the game is being made for mobile devices that vary in screen sizes. I feel my model needs to know the view size so it can appropriately adjust for it. I've thought about it for a while I could put all the adjustments in the view, but it just seems inefficient to translate the model positioning to the view's needed positioning every time. If the model knows the size it only needed to adjust itself once. So my question is can I pass the view size to the model without 'breaking' MVC? I feel personally they are still decoupled this way because a size is just a number, I could still change the view any time as long as it has a size. But I wanted to get a community response on this because I haven't seen many discussions of MVC being used in a game. (And to be clear I don't want an answer of why I shouldn't use it in a game, but do I break MVC by letting it know the view's size) EDIT - More details on the game's needs and why I wanted to pass the view. Some objects positions need to be set relative to the edge of the screen (such as UI elements) so that they appear relatively in the same place. Sprite sizes are not stretched if the window size is wider such as an IPhone 5 screen. They will just be placed relatively to the screen edge. .If I gave it to the view to handle this, I will need a flag saying that this element is positioned say x number of pixels from TOP BOTTOM RIGHT LEFT. Then allow the view to draw it with that information. Its acceptable, I just wanted to know if there was a better way while still being MVC because it seems this way will be repeating a logic over and over, where as if I knew the view size in the model, I could convert all the relative positions into absolute positions in one run, but with this I have to convert on every update to the screen.

    Read the article

  • Windows 2012/IIS 8 + ASP.NET MVC Applicaiton 403.14 (Forbidden) - The Web server is configured to not list the contents

    - by WiredPrairie
    I have a very simple MVC 4 application I'm trying to deploy to a Windows 2012 server. Inconsistently, when navigating to the root of the web application (http://localhost/app), it returns a 403.14-Forbidden: Detailed Error Information: Module: DirectoryListingModule Notification: ExecuteRequestHandler Handler: StaticFile Error Code: 0x00000000 Requested URL: http://localhost:80/test1/ Physical Path: c:\apps\test1\ Logon Method: Negotiate The web application is: Is a very vanilla VS2012 MVC4 Intranet template -- with only a tweak to a label to prove things were working. runs in an Integrated v4.0 application pool setup to use Windows authentication application pool has a custom AD Identity assigned (so it can gain access to a SQL server) application pool identity has read permissions in the c:\apps\test1 folder in which it is running It's an MVC4 application, targeting .NET 4.0 currently -There's no default document in an MVC4 application (like a default.aspx), as there shouldn't need to be one. I don't want to enable directory listings (as that's not the real error). Installed: Roles / Web Server (IIS) / Appliation Development / (.NET 4.5 Extensibility, Application Initialization, ASP.NET 4.5, ISAP Extensions, ISAPI Filters, WebSocket Protocol) Works locally on my machine in IISExpress on Windows 8 Has configured in web.config: <modules runAllManagedModulesForAllRequests="true" /> is set to precompiled during publish When I change the precompiled option to false, the web application does not fail (in my testing at least, it seems to work consistently). The reason I say it's inconsistent is that I've seen it work, then I've published, and the error returns. I can't find a pattern to the issue (and right now, I haven't been able to get it work again, at all). The 403 is returned from a local or remote web browser. I've had trouble finding a solution that isn't intended for older versions of Windows (like suggestions to reinstall ASP.NET which won't work on Windows 2012). I really don't know what else to try.

    Read the article

  • Varnish 3.0.2 and ISPConfig 3.0.4

    - by Warren Bullock III
    I followed the tutorial The Perfect Server - Ubuntu 11.10 [ISPConfig 3] here. I'm running an Ubuntu 11.04 (Natty Narwhal) server with 1024 RAM on Rackspace. I've gone through and updated to ISPConfig 3.0.4. Everything has been working great up to now when I decided to try and install Varnish. Initially I did an install of Varnish by issuing: apt-get update apt-get upgrade apt-get install varnish Apparently the version that was installed was Varnish 2.x so I went back and added the repositories for packages provided by varnish-cache.org curl http://repo.varnish-cache.org/debian/GPG-key.txt | apt-key add - echo "deb http://repo.varnish-cache.org/ubuntu/ lucid varnish-3.0" >> /etc/apt/sources.list apt-get update apt-get install varnish This updated my version of Varnish to 3.0.2 I then proceeded to make the following changes: vim /etc/default/varnish change DAEMON_OPTS to port 80: vim /etc/apache2/ports.conf NameVirtualHost *:8000 Listen 8000 vim /etc/apache2/sites-available/default <VirtualHost *:8000> vim /etc/apache2/sites-available/ispconfig.vhost Listen 8080 NameVirtualHost *:8080 <VirtualHost _default_:8080> I then proceeded to set my other vhosts to use 8000 (the apache2 port) so with all this set I reset both Apache2 and Varnish to test. I used Firebug in Firefox 11.0 The output from what I see doesn't seem to indicate that Varnish is working completely correct: First of all I see: X-Varnish 1644834493 but I've heard that unless you have two timestamps side by side than it's probably not working correctly so for example I was thinking I might see something like: X-Varnish 1644834493 1644837493 Also if I noticed this in the output which seems to be inconstant: X-Drupal-Cache MISS There are times when it will say HIT as well.... So the question here that I have is I think Varnish is partially working, however, why don't I see two timestamps on X-Varnish like I'm thinking I should and does the output of the screenshot I have look correct? If Varnish isn't working can someone tell me what I might being doing wrong? Thanks in advance.

    Read the article

  • Problems setting NTP sever with w32tm for a DC that is a Hyper-V guest

    - by R.Tonheim
    Hello ! I have tried to sett my DC to get its time from several NTP severs. I follow this answer (http://serverfault.com/questions/24298/w32time-sync-problems-for-hyper-v-guests-w32time-event-ids-38-24-29-35/24299#24299) to do it. First I disable Time Synchronization in the Hyper-V Integration Services for each guest. Then restart the Windows Time serviceon the guest. I had before this used this command: w32tm /config /manualpeerlist:"ntp.uio.no;timekeeper. uio.no;nissen.uio.no;0.no.pool.ntp.org;1.no.pool.ntp.org;2.no.pool.ntp.org" /syn cfromflags:manual /reliable:yes /update And the cmd sad: The command completed successfully. But the time was still 10 min wrong... I run w32tm again after restarted the DC without it having any effect. The w32tm /query /status still say: "Source: Local CMOS Clock" FROM MY CMD: Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Users\Administrator.MHGw32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 05.09.2009 20:06:21 Source: Local CMOS Clock Poll Interval: 6 (64s) C:\Users\Administrator.MHGw32tm /config /manualpeerlist:"ntp.uio.no;timekeeper. uio.no;nissen.uio.no;0.no.pool.ntp.org;1.no.pool.ntp.org;2.no.pool.ntp.org" /syn cfromflags:manual /reliable:yes /update The command completed successfully. C:\Users\Administrator.MHGw32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 05.09.2009 20:06:21 Source: Local CMOS Clock Poll Interval: 6 (64s) C:\Users\Administrator.MHG

    Read the article

< Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >