Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 618/1328 | < Previous Page | 614 615 616 617 618 619 620 621 622 623 624 625  | Next Page >

• Preventing Gigabit Loss due to printers [on hold]

  - by Charles

  HOW CAN I MAINTAIN Gigabit Ethernet integrity given this situation: What I have to work with: ** AC-router w/4 port gigabit N-600 router w/4 port gigabit Switch w/8 port gigabit All PCs have gigabit NICs 4-port POE injector at gigabit (all wiring = Cat 6) **Problem = Printer @ 10/100 (built-in) Printer @ 10/100 (built-in) Scanner @ 10/100 (built-in) Printer @ 10/100 (built-in)** What device (not setting up a PC) or configuration would I have to incorporate to get gigabit going given those devices? WILD SHOT: IS THERE SUCH A THING AS A SWITCH THAT CAN ACCOMMODATE THIS? THANK YOU ALL

  Read the article

• How to "swap in" again memory from page file to physical memory in Windows at once (like linux swap-off)

  - by Arnout

  Is there a way to swap back in (to put back all the memory data that was put into the page file (or swap, whatever you prefer)) memory on a windows PC? On linux, one can easily do this with the swapoff /dev/sdaX, where X is the swap partition. On windows, it seems to ask me to reboot each time.. The reason I'd like to do this, is that, even though swapping out the data to the swap file allows me to play a resource-hungry game fully in physical ram, when I stop the game, all the rest of my programs run slow. This is or course normal; all the programs were pushed into the page file because my RAM was too small, and all memory access to those programs after gaming bumps into hard page faults, with major delays and some frustration as a consequence. However, that frustration could easily be avoided, by simply allowing the PC to copy all data back into the physical memory for a minute or so, and then resume working on a fast working PC! (rather than having to endure the slowness -while- working) Thanks in advance for any advice on this! Kind regards

  Read the article

• Development on Windows 7; Web server on Linux - How to share Apache web root?

  - by TheKeys

  I've got a LAMP server that I want to use as a local web server. I've got a Windows 7 machine that I want to use as my development machine. The machines will be on the same LAN (or the Windows box will be VPNed into the LAN). My questions is, what is the best way of sharing the web root of the LAMP server so that I can edit the files on the remote Windows 7 machine and how do I go about configuring this on the Linux machine? (Fedora 16) I would like the solution to be as easy to use as possible with preferably no extra steps required to save/edit/upload files from my IDE on my Windows 7 machine. I'm thinking either a Samba or NFS share are the way to go but I'm concerned I'm going to run into issues with permissions and unix/windows file handling. Is one better than ther other for my use case or is there a better alternative solution? I'm currently using Windows 7 Professional which doesn't have NFS support but would upgrade to Ultimate which does have NFS support if it's the best solution.

  Read the article

• Load balancing application servers with Alteon 2424-SSL

  - by antispam

  We are having problems with load balancing configuration and we would like to clear the situation. We need to load balance among four JavaEE web application servers. The servers are configured as host1 port 7001 host1 port 7002 host2 port 7001 host2 port 7002 Do any of you know if it is possible with Nortel 2424-SSL application switch? Which would be the best configuration for it? (vips, ports, groups, services, ...) Thank you very much.

  Read the article

• How do you set up SSL and Nginx Proxying?

  - by Jason Christa

  I have Nginx listening to traffic on port 80 and proxying certain request to Apache over port 8080. I am going to set up Nginx to listen to port 443 for https traffic, but my question is how should the proxying be done now? Does the proxy to Apache need to be https or has Nginx already decoded it so I can keep sending it to Apache over port 8080. BTW, Apache is running with the least amount of modules installed possible and has currently has no SSL related modules, would I need to install any?

  Read the article

• Glassfish V3 won't start

  - by Thierry

  I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

  Read the article

• Load balanced IIS. Should I use NLB, or linux-based reverse proxy, or something else?

  - by growse

  What would be the best approach for load-balancing at least 2-3 Windows 2008 R2 IIS webservers running a multitude of .NET applications? My choices appear to be: 1) Hardware-based network device load balancer, like a Cisco CSS 2) Windows NLB 3) Some sort of linux based proxy, either haproxy or other The three servers sit as VMs on a vSphere farm, so I have the ability to clone to up the instance count in times of high load. I control the switch that the vSphere hosts are plugged into (Cisco 3750), but don't control the switching/routing infrastructure beyond that to the clients. (1) Is too expensive, and probably overkill for my needs. I've included this in case someone figures out a cunning way to do it on my existing network kit, which I doubt. (2) would seem to be the obvious "built-in" option, but seems to be quite fiddly messing around with network interfaces, multicast, and generally other things that seem to be needlessly complex. It's also fairly stupid, in that it can't remove hosts from the pool if they start throwing 500 errors or otherwise go wrong (3) is the most interesting option, as it would appear to offer the most flexibility and customizability, but without having to mess around with the network. However, while I'm familiar with the reverse-proxy capabilities of lighttpd etc, I'm not that well read on other options like HAProxy, which might be able to offer a lot more. Which would you go for, and is there anything I've not thought of?

  Read the article

• Enable re-attached mouse/keyboard via ssh?!

  - by aidan

  I had Ubuntu 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard, booted up and set to work. It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work! I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there? I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade. Thanks for any help! lsusb (with wireless mouse/keyboard receiver unplugged): Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb (with wireless mouse/keyboard receiver attached): Bus 004 Device 005: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• dd-wrt router firmware QoS troubleshooting

  - by Jeff Atwood

  I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

  Read the article

• SSH Socks Proxy wiith iptables REDIRECT

  - by Radium

  I have googled and haven`t found the answer on my question. Help me please. There are two servers: serverA with public IP 12.0.0.10 and an private IP 10.0.0.5 serverB with public IP 20.0.0.11 I have setup SOCKS proxy on serverB to serverA: ssh -D20.0.0.11:2222 [email protected] So when on my local machine in a browser i specify SOCKS proxy 20.0.0.11:2222 (serverB:2222) as external IP while browsing i get 12.0.0.10 (serverA IP). That is ok. As well if i go onto http://10.0.0.5 (serverA private IP) it is also reachable. That is what i need. I want to make servers A private IP to be available through servers B public IP on certain ports but without specifying SOCKS in my browser. I could use ssh port forward but the problem is - i need to forward many ports and do not know which exactly - i know only the range. So when i connect to 20.0.0.11 to any port , for example, from 3000:4000 range, i want that traffic to be redirected to 10.0.0.5 on the same port. That is why i`ve decided maybe SOCKS proxy via SSH and iptables REDIRECT could help me. Client - serverBPublicIP (any port from range 3000:4000) - serverAPublicIP - serverAPrivateIP (the port was requested on serverBPublicIP) On serverB i do: ssh -D20.0.0.11:2222 [email protected] iptables -t nat -A PREROUTING -d 20.0.0.11 -p tcp --dport 3000:4000 -j REDIRECT --to-port 2222 But that does not work - when i telnet on 20.0.0.11:3001 for example i do not see any proxied traffic on the serverA. What should i do else? I have tried tcpsocks like this (in example i am telneting to 20.0.0.11:3001) Client -> 20.0.0.11:3001 -> iptables REDIRECT from 3001 --to-port 1111 -> tcpsocks from 1111 to 2222 -> SOCKS proxy from serverB to serverA on port 2222 -> serverA But i do not know what to do with the traffic on serverA. How to route it to its private IP. Help me please. I know, VPN removes all the hell i am trying to create, but i have no ability to use tun/tap device. It is disabled.

  Read the article

• Problems with MGCP proxy creation

  - by Popof

  Hi, I'm trying to bypass my ISP router with my FreeBSD server (I've an optical connection so I've a RJ45 used to connect the box to WAN) Internet and TV are working fine (Using igmpproxy to forward TV stream) but I've a problem with phone. ISP's box is connected to the server which gives it a LAN address. The problem is that when the box builds MGCP packets (and especially SDP ones) it uses its LAN address. So I've think of writing an UDP proxy to handle MGCP and SDP packets in order to replace LAN address with server WAN address and then forward packet to WAN. Before starting coding I've captured stream packets using my server as a bridge between WAN connection and the ISP's box. And, in order to see if my solution is viable, I've tried to send those packets to the box using nemesis. I tried to send a packet (found in capture) containing an endpoint audit: AUEP 1447 aaln/[email protected] MGCP 1.0 F: A In the wireshark capture the box replied: 200 1447 OK A: a:PCMU;PCMA;G726-16;G726-24;G726-32;G726-40;G.723.1-5.3;G.723.1-6.3;G729;TELEPHONE-EVENT, fmtp:"TELEPHONE-EVENT 0-15,144,149,159", p:10-30, b:4-40, e:on, t:00, s:on, v:L;M;G;D, m:sendonly;recvonly;sendrecv;inactive;confrnce;replcate;netwtest;netwloop, dq-gi But when I use nemesis, I got an ICMP error: Port unreachable (Type 3, Code 3). To build this packet, WAN source address of the capture is replaced with my server LAN address, using the mgcp-callagent port (2727) and the packet is sent to the LAN address of the box at mgcp-gateway port (2427). The command I use is nemesis udp -S 192.168.2.1 -D 192.168.2.2 -x 2727 -y 2427 -P packet_to_send. I also tried an UDP scan to the box on callagent and gateway port: PORT STATE SERVICE 2727/udp open|filtered unknown 2427/udp closed unknown I found those results a little bit strange because it should be the 2427 port opened, as it was in capture. Internet Protocol, Src: <ISP MGCP Server>, Dst: <My WAN Address> User Datagram Protocol, Src Port: mgcp-callagent (2727), Dst Port: mgcp-gateway (2427) Does someone has any idea about how having my box responding to my requests ? Thanks in advance and sorry for my english.

  Read the article

• DHCP Relay setup in ubuntu server

  - by jerichorivera

  I have a network appliance (QNO) that works as traffic load balancer and dhcp server. I would like to add a linux server in between the network appliance and the client computers. The linux server will be used to monitor bandwidth usage. My problem is I still want DHCP to be served by the network appliance so that load balancing will still work efficiently. We are afraid that if we setup the linux server as the DHCP server the network appliance will not be able to load balance the traffic if it only sees the linux server as a single client connecting to it. I've been searching all over for a tutorial on how to setup DHCP relay but have not found any. How do I setup DHCP relay on my linux server given there are two NICs attached to it, one connects the linux server to the network appliance and the other connects the linux server to the client computers. EDIT Router (DHCP) ---- [eth0] Linux Server (Relay agent) [eth1] ----- PC (network) Router IP is 192.168.0.100 eth0 is on DHCP eth1 is static 192.168.2.11 (if I need to change this I can) Tried to do dhcrelay -i eth1 192.168.0.100, but the PC was not getting any DHCP lease from the DHCP router. I might be missing something here.

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• ldap-authentication without sambaSamAccount on linux smb/cifs server (e.g. samba)

  - by umlaeute

  i'm currently running samba-3.5.6 on a debian/wheezy host to act as the fileserver for our department's w32-clients. authentication is done via OpenLDAP, where each user-dn has an objectclass:sambaSamAccount that holds the smb-credentials and an objectclass:shadowAccount/posixAccount for "ordinary" authentication (e.g. pam, apache,...) now we would like to dump our department's user-db, and instead use authenticate against the user-db of our upstream-organisation. these user-accounts are managed in a novell-edirectory, which i can already use to authenticate using pam (e.g. for ssh-logins; on another host). our upstream organisation provides smb/cifs based access (via some novell service) to some directories, which i can access from my linux client via smbclient. what i currently don't manage to do is to use the upstream-ldap (the eDirectory) to authenticate our institution's samba: i configured my samba-server to auth against the upstream ldap server: passdb backend = ldapsam:ldaps://ldap.example.com but when i try to authenticate a user, i get: $ smbclient -U USER \\\\SMBSERVER\\test Enter USER's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.6] tree connect failed: NT_STATUS_ACCESS_DENIED the logfiles show: [2012/10/02 09:53:47.692987, 0] passdb/secrets.c:350(fetch_ldap_pw) fetch_ldap_pw: neither ldap secret retrieved! [2012/10/02 09:53:47.693131, 0] lib/smbldap.c:1180(smbldap_connect_system) ldap_connect_system: Failed to retrieve password from secrets.tdb i see two problems i'm having: i don't have any administrator password for the upstream ldap (and most likely, they won't give me one). i only want to authenticate my users, write-access is not needed at all. can i go away with that? the upstream ldap does not have any samba-related attributes in the db. i was under the impression, that for samba to authenticate, those attributes are required, as smb/cifs uses some trivial hashing which is not compatible with the usual posixAccount hashes. is there a way for my department's samba server to authenticate against such an ldap server?

  Read the article

• IIS serving locally, but not remotely

  - by cinqoTimo

  There is a router between the modem and the server. In the admin panel, I use single-port forward Internal Port External Port IP 80 80 to 192.168.1.100 (Web Server) Basically, I'm not on site, and there is a local IT person who is supposed to have this ready. I saw the port forward page, and it was configured as described above. So my question is, the only other thing it could be is firewall software, or some other device on the network that their not telling me about, right?

  Read the article

• Cant finish upgrade from 11.10 to 12 on VPS based on Parallels Virtuozzo Containers, due to libc6

  - by Carmageddon

  I was stuck with this problem near the end of an upgrade: WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Their suggested stepds dont work on VPS, and after googling, I came up to this: Why did my upgrade to 12.04 fail with "glibc not found" or "libc6" or "requires kernel 2.6.24" error? There is comment by izx which explains my problem and proposes a workaround (might take a while to convince the guys to upgrade the kernel..). However, when I follow his instructions, I get error: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libc-dev-bin libc6 libc6-dev libnih1 Suggested packages: glibc-doc The following packages will be upgraded: libc-dev-bin libc6 libc6-dev libnih1 4 upgraded, 0 newly installed, 0 to remove and 394 not upgraded. 1 not fully installed or removed. Need to get 0 B/7737 kB of archives. After this operation, 233 kB disk space will be freed. Do you want to continue [Y/n]? y locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Preconfiguring packages ... (Reading database ... 35175 files and directories currently installed.) Preparing to replace libc6-dev 2.13-20ubuntu5.2 (using .../libc6-dev_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-20ubuntu5.2 (using .../libc-dev-bin_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-20ubuntu5.2 (using .../libc6_2.15-0ubuntu10.3_amd64.deb) ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory WARNING: init script for samba not found. Stopping some services possibly affected by the upgrade (will be restarted later): cron: stopping...done. WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Processing triggers for man-db ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I also attempted to manually grab the .deb package and install it using dpkg -i, but getting: locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) Even though the file is: libc-bin_2.15-0ubuntu10+openvz0_amd64.deb

  Read the article

• lvm disappeared after disc replacement on raid10

  - by user142295

  here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

  Read the article

• Is there a Hyper-V virtual machine client for XP? Linux? Mac?

  - by mattlandis

  Is there a Hyper-V virtual machine client for XP? Linux? Mac? I'm aware that we could VNC or RDP into the virtual machine but the problem is if the VM is not running or is suspend the end user can't start it and IT needs to get involved. I guess what I'm looking for is something like VMconnect.exe that runs on xp or linux. Or, If I am totally barking up the wrong tree let me know. ;-)

  Read the article

• GlassFish v3 Domain Server cannot start. Port is occupied.

  - by Kirby

  I imagine this is a pretty generic error. I cant seem to find any documentation on it. I am simply attempting to run a java web project with jsp's and beans... using netbeans 6.8 on windows xp. Thoughts? apologies for such a newb question. -Kirb

  Read the article

• TypeError: Error #1007: Instantiation attempted on a non-constructor. on port to Flex 4

  - by Josh Handel

  I have been porting an app from Flex 3.4.x to 4.0.. I have successfully ported the app and its libraries to flex 4.0, I've also removed ALL the references to http://www.adobe.com/2006/flex/mx in any of my mxml files... In short I "think" I have moved everything over to the new mx framework (2009).. But I still get the following error (which never happend in 3.4 or 3.5 with this same app) when I try to run my flex app. TypeError: Error #1007: Instantiation attempted on a non-constructor. at mx.preloaders::Preloader/initialize()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\preloaders\Preloader.as:253] at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::initialize()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\SystemManager.as:1925] at mx.managers::SystemManager/initHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\SystemManager.as:2419] At this point I am completely stumped.. anyone have any ideas? Thanks

  Read the article

• "Exception: msg 'axis2:null', not-found" when using a suds client with an axis2 server

  - by konrad

  I am writing a Suds (Python) SOAP client for an Axis2 server I have no control over. Suds chokes on the WSDL file with the following exception: File "site-packages/suds/wsdl.py", line 494, in resolve raise Exception("msg '%s', not-found" % op.input) Exception: msg 'axis2:null', not-found This is the WSDL file (I have replaced the hostnames with localhost). Any clue on how to fix this with the ImportDoctor? <?xml version="1.0" encoding="UTF-8"?> <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:axis2="http://ws.apache.org/axis2" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" targetNamespace="http://ws.apache.org/axis2"> <wsdl:types/> <wsdl:portType name="__SynapseServicePortType"> <wsdl:operation name="mediate"> <wsdl:input message="axis2:null" wsaw:Action="urn:mediate"/> <wsdl:output message="axis2:null" wsaw:Action="urn:mediateResponse"/> </wsdl:operation> </wsdl:portType> <wsdl:binding name="__SynapseServiceSoap11Binding" type="axis2:__SynapseServicePortType"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="mediate"> <soap:operation soapAction="urn:mediate" style="document"/> <wsdl:input> <soap:body use="literal"/> </wsdl:input> <wsdl:output> <soap:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="__SynapseServiceSoap12Binding" type="axis2:__SynapseServicePortType"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="mediate"> <soap12:operation soapAction="urn:mediate" style="document"/> <wsdl:input> <soap12:body use="literal"/> </wsdl:input> <wsdl:output> <soap12:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="__SynapseServiceHttpBinding" type="axis2:__SynapseServicePortType"> <http:binding verb="POST"/> <wsdl:operation name="mediate"> <http:operation location="mediate"/> <wsdl:input> <mime:content type="text/xml" part="mediate"/> </wsdl:input> <wsdl:output> <mime:content type="text/xml" part="mediate"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="__SynapseService"> <wsdl:port name="__SynapseServiceHttpsSoap11Endpoint" binding="axis2:__SynapseServiceSoap11Binding"> <soap:address location="https://localhost:8843/services/__SynapseService.__SynapseServiceHttpsSoap11Endpoint"/> </wsdl:port> <wsdl:port name="__SynapseServiceHttpSoap11Endpoint" binding="axis2:__SynapseServiceSoap11Binding"> <soap:address location="http://localhost:8880/services/__SynapseService.__SynapseServiceHttpSoap11Endpoint"/> </wsdl:port> <wsdl:port name="__SynapseServiceHttpsSoap12Endpoint" binding="axis2:__SynapseServiceSoap12Binding"> <soap12:address location="https://localhost:8843/services/__SynapseService.__SynapseServiceHttpsSoap12Endpoint"/> </wsdl:port> <wsdl:port name="__SynapseServiceHttpSoap12Endpoint" binding="axis2:__SynapseServiceSoap12Binding"> <soap12:address location="http://localhost:8880/services/__SynapseService.__SynapseServiceHttpSoap12Endpoint"/> </wsdl:port> <wsdl:port name="__SynapseServiceHttpsEndpoint" binding="axis2:__SynapseServiceHttpBinding"> <http:address location="https://localhost:8843/services/__SynapseService.__SynapseServiceHttpsEndpoint"/> </wsdl:port> <wsdl:port name="__SynapseServiceHttpEndpoint" binding="axis2:__SynapseServiceHttpBinding"> <http:address location="http://localhost:8880/services/__SynapseService.__SynapseServiceHttpEndpoint"/> </wsdl:port> </wsdl:service> </wsdl:definitions>

  Read the article

• Multiple INET sockets (mulple IP's too) connected to UNIX sockets

  - by Andrew

  HOST = same host all the time, accepts multiple connection. I have a dedicated server and I will buy extra IP's. Socket 1 connects to HOST:PORT, from IP-1 Socket 2 connects to HOST:PORT, from IP-1 Socket 3 connects to HOST:PORT, from IP-1 Socket 4 connects to HOST:PORT, from IP-2 Socket 5 connects to HOST:PORT, from IP-2 Socket 6 connects to HOST:PORT, from IP-2 After creating all sockets I want to access them easy as UNIX sockets from PHP. /sys/socket1 /sys/socket2 /sys/socket3 /sys/socket4 /sys/socket5 /sys/socket6 I want the sockets to work in background (like daemon) and I want to be able to connect from PHP to any of this sockets and RECV/SEND whatever I want. I saw "socat" and I think that's the solution for me, please tell me how to use socat, or how to do it other way. Thankyou!

  Read the article

• Getting WIF to work with OpenSSO as STS

  - by Tyler

  Hi gang, Using OpenSSO as an identity provider, what should I do (i.e. with FedUtil.exe) to configure my .NET relying party so that it will do the STS dance? I've gotten OpenSSO's WS-Trust client samples running, so I think OSSO's in a good state and ready for the next step. I'm at the FedUtil.exe's "Use an existing STS" wall. Where do I get the STS WS-Federation metadata document for OpenSSO? I've tried: the.osso.server:port/opensso/sts the.osso.server:port/opensso/sts?wsdl the.osso.server:port/opensso/sts/mex the.osso.server:port/opensso/sts/mex?wsdl the.osso.server:port/opensso/sts/soap11 the.osso.server:port/opensso/sts/soap11?wsdl with no luck. Thanks for your help, Tyler

  Read the article

• How do I use Google protobuf to communicate over a serial port?

  - by rob

  I'm working on a project that uses RXTX and protobuf to communicate with an application on a development board and I've been running into issues which implies that I'm likely doing things the wrong way. Here's what I currently have for writing the request to the board (the read code is similar): public void write(CableCommandRequest request, OutputStream out) { CodedOutputStream outStream = CodedOutputStream.newInstance(out); request.writeTo(outStreatm); outStream.flush(); } The OutputStream that is used is prepared by RXTX and the development board seems to indicate that data is being received, but it is getting garbled or is otherwise not being understood. There seems to be little documentation on using protobuf over a serial connection so I'm assuming that passing the OutputStream should be sufficient. Is this in fact correct, or is this the wrong way of sending the response over the serial connection?

  Read the article

• Does jQuery have any functions to scroll the client to the bottom of the view port?

  - by alex

  I want to animate a scroll to the bottom of the viewport with jQuery. Is there a plugin available which isn't overkill (i.e. without a huge feature set for this small task); Is there a plugin available or a way to do this natively with jQuery?

  Read the article

< Previous Page | 614 615 616 617 618 619 620 621 622 623 624 625  | Next Page >