Search Results

Search found 20484 results on 820 pages for 'small projects'.

Page 619/820 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• Formatting a a memory stick with two partitions?

  - by Marius

  I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. So, to summarize: I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.

  Read the article

• Name resolution not working with ipv6 on centos

  - by jolivier

  I just installed CentOs 6.3 on a server to be installed in a data center, but cannot get name resolution / curl to work. I know this is because of it trying to use ipv6, since ping google.com works, curl -4 google.com works, but not curl google.com. I removed the ipv6 adress from the interface and it does not change anything. This is very problematic since most system tools like yum fail at name resolution currently. Browsers like Firefox work because they might be using another tool for name resolution than the one use by curl. I managed to fix this on workstations by completely disabling ipv6 following tutorials like this one / hardcoding name resolution in /etc/hosts. But since I am here configuring a server which will be later installed in a remote data center, I would like not to mess up, understand what is going on and fix it properly. Besides, I will face the same issue with more servers to come so I would really appreciate your help in understanding this problem and how to solve it. I would be happy to provide more information if needed to help understand what is going on. The current network configuration is a small enterprise network, with a DNS server (let's call it A) configured once a long time ago. dig google.com and dig -4 google.com are both refused by the A DNS. But this is also true for my workstation on which curl is working (and yes they both use the same A DNS server). Indeed this faulty server and my workstation have multiple nameservers in /etc/resolv.conf, and the second one is working fine for both of them, so if I remove A from my resolv.conf everything works fine! Regards, Olivier

  Read the article

• Join mp4 files in linux

  - by Jose Armando

  I want to join two mp4 files to create a single one. The video streams are encoded in h264 and the audio in aac. I can not re-encode the videos to another format due to computational reasons. Also, I cannot use any gui programs, all processing must be performed with linux command line utilities. FFmpeg cannot do this for mpeg4 files so instead I used MP4Box e.g. MP4Box -add video1.mp4 -cat video2.mp4 newvideo.mp4 unfortunately the audio gets all mixed up. I thought that the problem was that the audio was in aac so I transcoded it in mp3 and used again MP4Box. In this case the audio is fine for the first half of newvideo.mp4 (corresponding to video1.mp4) but then their is no audio and I cannot navigate in the video also. My next thought was that the audio and video streams had some small discrepancies in their lengths that I should fix. So for each input video I splitted the video and audio streams and then joined them with the -shortest option in ffmpeg. thus for the first video I ran avconv -y -i video1.mp4 -c copy -map 0:0 videostream1.mp4 avconv -y -i video1.mp4 -c copy -map 0:1 audiostream1.m4a avconv -y -i videostream1.mp4 -i audiostream1.m4a -c copy -shortest video1_aligned.mp4 similarly for the second video and then used MP4Box as previously. Unfortunately this didn't work either. The only success I had was when I joined the video streams separetely (i.e. videostream1.mp4 and videostream2.mp4) and the audio streams (i.e. audiostream1.m4a and audiostream2.m4a) and then joined the video and audio in a final file. However, the synchronization is lost for the second half of the video. Concretelly, there is a 1 sec delay of audio and video. Any suggestions are really welcome.

  Read the article

• copying an lvm partition to a smaller disk, and renaming volume groups.

  - by dlamblin

  I was trying to shrink a vmdk (VMWare disk image) file to be as small as possible, and found two recommendations. The first is to cat /dev/zero into the fs then delete it, and run VMWare tools' shrink. This works okay. The second is to copy everything into a new vmdk. I went the second route. I did not use dd because I actaully want to use as few blocks as possible, instead of having a block-by-clok copy. Any unlinked files will still have blocks that aren't zeroed out. Secondly the centos image was mostly lvm, except for the boot partition, and my target was going to be 4gb instead of 8gb. I did use dd for the first 40mb to get the boot blocks and partition copied. I then used parted to create an identical primary boot, and smaller primary lvm. Then I used pvcreate on that device sdb2, vgcreate, and lvcreate to create a root and swap. I used mkfs.ext3fs on the root partition and then rsync -av / /2root excluding /proc /sys /2root /dev. So far everything went fine. My problem is that: The result is 2.7 GB while the source was 2.1 GB. This is weird to me. The second vgroup is called VolGroup01, while the original was called VolGroup00. How can I rename the VolGroup01 to VolGroup00 and swap it out after all this?

  Read the article

• Default Gateway solution on NAT'd network (best options)

  - by kwiksand

  I've recently changed a network from a bunch of machines exposed to the net on a network to a more security conscious Firewall-fronted network with a DMZ for public services. Everything's mostly working perfectly now, but I've got the old problem of NAT Loopback where a machine within the LAN wants to access a public service via the public/external IP. I've solved this problem previously in a small/SOHO environment simply using NAT loopback features of the router in use or a simple iptables rule to do the same, but I want to make sure I make the most resilient choice with the least concern. It seems I can: Use iptables as I've said to DNAT and MASQUERADE the change source/destination so the connection works correctly i.e iptables -A PREROUTING -t nat -d ip.of.eth0.here -p tcp --dport 8080 -j DNAT --to 192.168.0.201:8080 iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp --dport 8080 -d 192.168.0.201 -j MASQUERADE Use split DNS, with internal mappings for public IP's Potentially do some route nastyness by setting the Default Gateway to use a different externally exposed IP to then come back in the public route (messy) Someone mentioned putting the Default Gateway within the DMZ as well (on serverfault), but I can't find the post again. I'm sure this is a common issue for many with NAT'd networks, but I've not really seen the perfect solve all when it comes to fixing this problem. What is your opinion?

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Two hosted servers, one public - VPN?

  - by Aquitaine

  Hello there, Web developer here who has to occasionally wear a system & network admin hat (small company). We currently have a single hosted server running Windows Server 2003 that runs both our web server (IIS/Coldfusion) and our database server (SQL Server 2008). We lock down the SQL server by allowing only specific IPs to connect to it. Not ideal but it's worked thus far. We're moving up to two distinct servers and I want to take the opportunity to 'get things right' and make only the web server face the public. What I need to be able to do is to allow only a handful of people to connect to the database server. Rather than using an IP allow list, I'd prefer to use a VPN to let people through so that access is based on the user and not simply the user's location. I'm leaning toward something like OpenVPN, just so I can stick with Server 2008 Web edition. Do I: Use the web server as a VPN server and set up the database server to only accept connections from the web server? Is there an extra step required to make connections to, say, db.mycompany.com route through the VPN rather than through a different connection? I'm ignorant of this part of network infrastructure stuff. Or, Set up a VPN server on the database server as the only public-facing server connection so that there aren't any routing issues to deal with? I know this is Network 101 stuff but I thought I'd ask before just blundering through it since it could affect the company a bit. Thanks very much!

  Read the article

• VMWare Newbie - looking for hardware recommendations and help :) [closed]

  - by Dan

  I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

  Read the article

• Why should one have a secondary DNS server?

  - by Sam Levin

  I'm very confused. I basically understand how DNS works. Here's an example that helps illustrate what I'm having trouble understanding. Right now, I run a small web-server. I use my provider's DNS manager, so I don't have a DNS server hosted on the machine. Let's say for a second, that I don't use my host's DNS, and I decide to set up a DNS server on my server. Hypothetical scenario: my server (entire) server goes down - DNS included. Why do I need backup DNS? If the server is down, who cares if the DNS server is down too, considering that even if I had DNS up (it wasn't on the crashed server), it wouldn't be able to forward requests anyway since the server would be down? Is the point of having secondary DNS, to be able to change the IP addresses that your DNS server points to, so if your webserver was down, you could redirect traffic to a backup? How would you switch to the secondary provider, in the event that your main DNS provider becomes unavailable? Is a backup DNS system basically up all the time? How is it configured? Is it just an exact clone of the DNS server you would have on your server? Do they run simultaneously? Hopefully someone can see what I'm hung up on, and provide some guidance. Thanks

  Read the article

• Conky starts above windows in Ubuntu Maverick

  - by DesertIvy

  Hey guys, I did not run into this problem until I upgraded my Ubuntu box to Maverick Meerkat (10.10). Basically, whenever I start my computer, conky runs as expected, except it gets drawn over any windows that I load (see screenshot). To fix this for a single session, I simply restart conky by running killall conky; conky in a terminal. Conky gets re-drawn below active windows (namely, only appearing on my desktop), and does not have the border/drop-shadow, but I have to do this every time I start a new session. Is there a simple way to fix this? I have a small shell script that I run on startup, but it does not seem to solve the problem. #!/bin/bash sleep 10 && conky; sleep 5 && killall conky; conky; Below is the non-text part of my .conkyrc file. # Conky settings # background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale yes double_buffer yes no_buffers yes text_buffer_size 2048 #imlib_cache_size 0 temperature_unit fahrenheit # Window specifications # own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 minimum_size 200 250 maximum_width 200 alignment tr gap_x 220 gap_y 280 # Graphics settings # draw_shades no draw_outline no draw_borders no draw_graph_borders no # Text settings # use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no temperature_unit celsius default_color FFFFFF # Lua Load # lua_load ~/.lua/scripts/clock_rings.lua lua_draw_hook_pre clock_rings

  Read the article

• Eclipse: Slow startup time

  - by ct2k7

  Hello, I've got Eclipse 3.6.1 on my MacBook Air (2010), and I'm getting slowish startup times. Well, slow, compared to my Desktop, which is somewhat less powerful and a few years old). The startup generally takes 15 seconds, and of this, 4 is spent just on the Eclipse splash screen, before Eclipse loads anything. No projects are open at startup. Here's a copy of my eclipse.ini. -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.1.R36x_v20100810 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Xms256m -Xmx512m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -Dosgi.requiredJavaVersion=1.6 -Xverify:none -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+UnlockExperimentalVMOptions -XX:+AggressiveOpts -XX:+StringCache -XX:+UseFastAccessorMethods -XX:+UseLargePages -XX:LargePageSizeInBytes=4m -XX:AllocatePrefetchLines=1 -XX:AllocatePrefetchStyle=1 -Dide.gc=true The problem doesn't seem to be related to plugins - I've disabled the ones which I don't need, and regardless of this configuration or whether all of them are selected on startup, it only takes 1second to load the plugins. I'm running Eclipse 3.6.1 Cocoa x64 build (vanilla) with the Zend Studio plugin. The machine has 4GB RAM, an SSD with over 64% free space, 1.6GHz (4MB L2 Cache). OS is Mac OS X 10.6.6, latest Java available, 1.6. For comparison, my Desktop, an old P4 3GHZ (512K L2 Cache) with a 7200RPM drive, under 40% free space, Eclipse (same config) loads in under 7 seconds, consistently. Note, this one is a Windows machine, with latest Java installed.

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• What is a good client for handling large amounts of mail ?

  - by ldigas

  Although the title sums it up nice, I'll repeat and explain. What would be a good email client for handling large amounts of mail ? Large portion of mails I receive come with attachments (zip, rar, pdf, dwg, etc.) and within a month I usually have another 1,5-2Gb of new mail. I've noticed that 'standard' Outlook Express (with whose interface I've been very happy) gets awfully slow after a while. Archiving helps but not much. Then I usually take the files, move them onto a dvd, delete all messages I can do without and start anew. The thing is, I would love to have them all in email client since I often go after some old mails (slow projects). So, what would be good alternatives ? If it is portable, that would also be nice, but I can also live without it. post scriptum: I love @gmail, but cannot use it for work. I know I could theoretically forward all of it there, and back, but that approach doesn't make my boss very happy (email handling policies and similar).

  Read the article

• Which server software and configuration to retrieve from multiple POP servers, routing by address to correct user

  - by rolinger

  I am setting up a small email server on a Debian machine, which needs to pick up mail from a variety of POP servers and figure out who to send it to from the address, but I'm not clear what software will do what I need, although it seems like a very simple question! For example, I have 2 users, Alice and Bob. Any email to [email protected] ([email protected] etc) should go to Alice, all other mail to domain.example.com should go to Bob. Any email to [email protected] should go to Bob, and [email protected] should go to Alice Anything to *@bobs.place.com should go to Bob And so on... The idea is to pull together a load of mail addresses that have built up over the years and present them all as a single mailbox for Bob and another one for Alice. I'm expecting something like Postfix + Dovecot + Amavis + Spamassassin + Squirrelmail to fit the bill, but I'm not sure where the above comes in, can Postfix deal with it as a set of defined regular expressions, or is it a job for Amavis, or something else entirely? Do I need fetchmail in this mix, or is its role now included in one of the other components above. I think of it as content-filtering, but everything I read about content-filtering is focussed on detecting spam rather than routing email.

  Read the article

• Win7 - Some pinned program's icons are corrupt, show default

  - by Andrew Backer

  I have both FF 3.6 & Chrome pinned to my taskbar in win7. The icons for these two programs show up as the ugly default icon from yesteryear. Strange. Is there some way to force an icon refresh for pinned programs? When I first added them they showed properly, but several days later they reverted to this state Un-pinning the program causes the icon to show up properly, and re-pinning it causes it to break again. These other proggies show up fine: Media Center, Media Player Classic HC, Hulu Desktop, WMP, and the folders. I have 2 user accounts on this box, and both are showing this behavior. I have tried changing the taskbar icon size to 'small' and back, but to no effect. Edit (Add) The icons show up as broken in the start menu too, but I can navigate to the EXE directly. When I click "change icon" in the properties for the start menu entry I get the error : Can not find %ProgramFiles%\Google\Chrome...\chrome.exe.

  Read the article

• CMS/Wiki to use for a HTML5 video site

  - by Clinton Blackmore

  Greetings. I want to put up a website with instructive screencasts, and allow for people to add comments to them. I would like use the Video for Everybody technique, partly because I dislike Flash and because it helps in a small way to move the web forward [while being backwards compatable]. I recognize that HTML5 is still in draft, and that support for it varies. I do have some hosting space, and can run Perl, PHP, and Ruby on Rails applications, with a MySQL backend. I should mention that part of my working job involves running some web servers, and that I am a programmer by training (with only a limited familiarity with Perl and PHP, and none with Ruby). I should mention why I don't particularly want to go with a video hosting site (like YouTube or Vimeo): Flash Video Resolution and Quality [I'd like to put up 800x600 videos] Videos promote a club that is not stricly non-profit [ie. may fall afoul of Terms of Service] I'm already paying for web hosting, and free video hosting comes with time and bandwidth limits I don't want there to be two locations where you can comment on the video Now, having said all that, I'd be quite comfortable putting up my own HTML pages, except: that's so web 1.0! :) [ie. it does not allow for comments] I also want to do some blogging and possibly put up a wiki; the site will not be entirely screencasts So, can anyone recommend a CMS (or Wiki, or similar application) that I can customise for this purpose?

  Read the article

• How is Apache still working?

  - by PJ

  Recently, I decided to set up a local development environment for my work projects. I'm a PHP developer, with just enough knowledge of Linux and Apache to break things mightily. To get the local environment looking like my work environment, I had to upgrade PHP. When I did, Apache wouldn't restart. I decided I wanted to start fresh (this is where things went wrong) and that I'd reinstall Apache and PHP using MacPorts. So, I went through and tried to delete all the Apache files. Yup. I ran locate apache2 and deleted any folders that looked important. (I know, I know) Then I did a /usr/libexec/locate.updatedb to make sure everything was up to date. I even restarted my machine, just to make sure. The issue is, http://localhost still works. As does an alias I set up, http://butler. Shouldn't they not work? Now that I'm this far in, are there any tips for how to completely remove Apache so I can start over? Worst case, I have a timemachine backup, so I can always just restore that... Thanks in advance.

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by Neil Katin

  We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• Limit the amount of data that can be stored in a folder on Ubuntu Server 12.04?

  - by dougoftheabaci

  I'm in the process of building my first server. It's up, it's running, I'm transferring copious amounts of data away from my horrid little Drobo (DO NOT BUY ONE OF THESE, EVER). However, there's one thing I have yet to do: I'd like to set it up for Time Machine backups as well. I've seen all the guides and I have some idea of how to set the whole thing up, but the issue is that Time Machine will just fill up as much space as you let it. So if I let it lose in my 8 TB zpool it'll slowly consume every last available sector. This, of course, is not acceptable. I have a folder at the root of my zpool called "ZFS Time Machine" and I would like to limit it to 1 TB (all I need for backup purposes). However, I have no idea how to do that. Is this possible? I can continue using a small external hard drive attached via FW800 if I have to but I'd much rather prefer putting everything on my server.

  Read the article

• SQL Server 2005 standard filegroups / files for performance on SAN

  - by Blootac

  Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

  Read the article

• Why are group policy preference drive mappings not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. To note: The mappings were applied before the GPO with a login script using the : net use ... command - all was working perfectly and correctly for the domain administrator user as well - That removes sharing and security problem (IMO) My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• IPSec for LAN traffic: Basic considerations?

  - by chris_l

  This is a follow-up to my Encrypting absolutely everything... question. Important: This is not about the more usual IPSec setup, where you want to encrypt traffic between two LANs. My basic goal is to encrypt all traffic within a small company's LAN. One solution could be IPSec. I have just started to learn about IPSec, and before I decide on using it and dive in more deeply, I'd like to get an overview of how this could look like. Is there good cross-platform support? It must work on Linux, MacOS X and Windows clients, Linux servers, and it shouldn't require expensive network hardware. Can I enable IPSec for an entire machine (so there can be no other traffic incoming/outgoing), or for a network interface, or is it determined by firewall settings for individual ports/...? Can I easily ban non-IPSec IP packets? And also "Mallory's evil" IPSec traffic that is signed by some key, but not ours? My ideal conception is to make it impossible to have any such IP traffic on the LAN. For LAN-internal traffic: I would choose "ESP with authentication (no AH)", AES-256, in "Transport mode". Is this a reasonable decision? For LAN-Internet traffic: How would it work with the internet gateway? Would I use "Tunnel mode" to create an IPSec tunnel from each machine to the gateway? Or could I also use "Transport mode" to the gateway? The reason I ask is, that the gateway would have to be able to decrypt packages coming from the LAN, so it will need the keys to do that. Is that possible, if the destination address isn't the gateway's address? Or would I have to use a proxy in this case? Is there anything else I should consider? I really just need a quick overview of these things, not very detailed instructions.

  Read the article

• Authenticated User Impersonation in Classic ASP under IIS7

  - by user52663

  I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

  Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >