Search Results

Search found 3486 results on 140 pages for 'chris dudley'.

Page 62/140 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Ubuntu Server, 2 Ethernet Devices, Same Gateway - Want to force internet traffic through 1 device (or at least allow it to work!)

  - by Chris Drumgoole

  I have a Ubuntu 10.04 Server with 2 ethernet devices, eth0 and eth1. eth0 has a static IP of 192.168.1.210 eth1 has a static IP if 192.168.1.211 The DHCP server (which also serves as the internet gateway) sits at 192.168.1.1. The issue I have right now is when I have both plugged in, I can connect to both IPs over SSH internally, but I can't connect to the internet from the server. If I unplug one of the devices (e.g. eth1), then it works, no problem. (Also, I get the same result when I run sudo ifconfig eth1 down). Question, how can I configure it so that I can have both devices eth0 and eth1 play nice on the same network, but allow internet access as well? (I am open to either enforcing all inet traffic going through a single device, or through both, I'm flexible). From my google searching, it seems I could have a unique (or not popular) problem, so haven't been able to find a solution. Is this something that people generally don't do? The reason I want to make use of both ethernet devices is because I want to run different local traffic services on on both to split the load, so to speak... Thanks in advance. UPDATE Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The secondary network interface #auto eth1 #iface eth1 inet dhcp (Note: above, I commented out the last 2 lines because I thought that was causing issues... but it didn't solve it) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 192.168.1.1 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 UPDATE 2 I made a change to the /etc/network/interfaces file as suggested by Kevin. Before I display the file contents and the route table, when I am logged into the server (through SSH), I can not ping an external server, so this is the same issue I was experiencing that led to me posting this question. I ran a /etc/init.d/networking restart after making the file changes. Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp address 192.168.1.210 netmask 255.255.255.0 gateway 192.168.1.1 # The secondary network interface auto eth1 iface eth1 inet dhcp address 192.168.1.211 netmask 255.255.255.0 ifconfig output eth0 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:7f inet addr:192.168.1.210 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:27f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6397 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:538881 (538.8 KB) TX bytes:85597 (85.5 KB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:80 inet addr:192.168.1.211 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:280/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5799 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:484436 (484.4 KB) TX bytes:1184 (1.1 KB) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:635 errors:0 dropped:0 overruns:0 frame:0 TX packets:635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:38154 (38.1 KB) TX bytes:38154 (38.1 KB) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Windows Server 2012 Can't Print

  - by Chris

  I know this may sound incredibly stupid and there is probably an easy solution but I can't seem to find it. Friends of mine recently upgraded their server for their small business from the POS old one. New hardware and a change from Windows Server 2003 to Windows Server 2012. I've got everything they need transfered over and running except for printing. They need to be able to print to printers in the vans their technicians use from the server via remote desktop. In other words the use a laptop to remote desktop into the server and need to print invoices out from the remote server to printers attached locally via usb. On the old server they just installed the identical driver and that was it, they could print as needed. On this server no matter what we seem to do we can't get it to print remotely, and in the process we also discovered that the server can't even print to the network printer. It sees the printer on it's network and it sees (through redirect) the printers in the vans but when you hit print it claims it did and nothing happens. There isn't an issue with the printers themselves as every other device we have can print to them without issues. Is there some setting that is inhibiting the server from printing? Is there something I need to install (print server?) to add the functionality? Thanks in advance for helping me out here

  Read the article

• Install Git on a Media Temple (dv) 4.0 server

  - by Chris

  I'm trying to install Git on my Media Temple (dv) 4.0 server. I've followed these instructions. It seems to have "installed", as there are a boat-load of files in the /root/git-2012-06-06 directory. However, when I perform any git command in the server, I receive this message: git: command not found My assumption is that something, somewhere is not configured properly, but I have no idea where to start. Could anybody lend a hand / offer some pointers? (And if you hadn't guessed, I'm pretty new to all this, so please be kind!)

  Read the article

• How do I set the TEMP environment variable for the "Network Service" user?

  - by Chris Phillips

  We have a system that uses Path.GetTempFile and Path.GetTempPath calls to work with temporary files fairly frequently. This system also runs as the "Network Service" user. We're finding that we're running out of room on the C drive (for other issues, our temp files are cleaned up correctly) and would like to be able to move the temp directory to a different drive. The easiest solution to this seems to be to change the TMP or TEMP environment variables for the Network Service user, but I only seem to be able to set my own user or the "system" variables that are overwritten by the Network Service user profile. How do I set these variables for the Network Service user?

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something.

  Read the article

• Empty Recycle Bin error "Cannot Delete Dc12: Access denied."

  - by Chris Noe

  The Dc number can vary. The error is a sporadic, but when it happens it prevents the contents of the recycle bin from being deleted. It can also occur when the recycle bin appears to be empty, yet it has the crumpled paper indicator. Rebooting makes the problem go away, but it can also magically go away by just waiting a long time, like over night. But the problem keeps recurring with no rhyme or reason. What is causing this? I really don't want to reinstall Windows.

  Read the article

• How to allow unprivileged apache/PHP to do a root task (CentOS)

  - by Chris

  I am setting up a sort of personal dropbox for our customers on a CentOS 6.3 machine. The server will be accessible thru SFTP and a proprietary http service base on PHP. This machine will be in our DMZ so it has to be secure. Because of this I have apache running as an unprivileged user, hardened the security on apache, the OS, PHP, applied a lot of filtering in iptables and applied some restrictive TCP Wrappers. Now you might have suspected this one was coming, SELinux is also set to enforcing. I'm setting up PAM to use MySQL so my users in the web application can login. These users will all be in a group that can use SSH only for SFTP and users will be chrooted to their own 'home' folder. To allow this SELinux wants the folders to have the user_home_t tag. Also the parent directory needs to be writable by root only. If these restrictions are not met SELinux will kill the SSH pipe immediately. The files that need to be accessible thru both http and SFTP so I have made a SELinux module to allow Apache to search/attr/read/write etc. to directories with the user_home_dir_t tag. As sftp users are stored in MySQL I want to setup their home dirs upon user creation. This is a problem since Apache has no write access to the /home dir, it's only writable by root since it's required to keep SELinux and OpenSSH happy. Basically I need to let Apache do only a few tasks as root and only within /home. So I need to somehow elevate the privileges temporarily or let root do these tasks for apache instead. What I need to have apache do with root privileges is the following. mkdir /home/userdir/ mkdir /home/userdir/userdir chmod -R 0755 /home/userdir umask 011 /home/userdir/userdir chcon -R -t user_home_t /home/userdir chown -R user:sftp_admin /home/userdir/userdir chmod 2770 /home/userdir/userdir This would create a home for the user, now I have an idea that might work, cron. That would mean the server needs to check for users that have no home every minute, then when creating users the interface would freeze for an average of 30 seconds before the account creation can be confirmed which I do not prefer. Does anybody know if something can be done with sudoers? Or any other idea's are welcome... Thanks for your time!

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• MS Publisher 2003 - hangs when saving to desktop

  - by Chris

  We have a win 7 home prem pc, amd cpu, 8G ram, plenty of free disk space. Whenever user is working in publisher 20003, and tries to save a publisher 2003 document to the desktop, the save as dialog hangs and takes 2-3 minutes to display the desktop save location. I've tested excel 2003, it has no problems immediately displaying the desktop save as location and saving the file.

  Read the article

• How to recover from locked down XP Home computer

  - by Chris

  We've got a Kiosk machine provided to us by a manufacturer. The video card is flaky, so I want to replace it with another card we have on hand, rather than shipping across the country. The problem is that they have policies in place that locks the system down to a point where only the manufacturers demo works on the computer so I can't install drivers for the newer card. I know pretty much nothing about windows policies or the policy editor. Am I fighting a losing battle trying to replace thi scard?

  Read the article

• Hyper V cluster - one VM won't migrate

  - by Chris W

  We have a Failover Cluster built up on 6 blades, each running Hyper V. Each box is running Server 2008 R2. We've got a number of VMs running that all have the same basic config: VHD stored on a cluster shared volume. 2 virtual NICs (1 for LAN connection and 1 for SAN connection). All of our VMs will happily migrate between any other blade apart from one single VM which is running fine on it's current blade but will not migrate to any other location. What could be the cause of it or where should I look to get a detailed error message as I can't seem to find much information logged in any of the logs. Edit: I know the usual culprit is mis-matching resource names. We've already been there with the NICs named differently on some of the blades. As far as we can tell now everything looks to be identical on each bit of metal.

  Read the article

• Mouse/Touchpad not working in Mac OS X Lion Pre-Boot Authentication (PBA) with File Vault 2

  - by Chris

  I set up File Vault 2 in Mac OS X Lion with Pre-Boot Authentication (PBA). In PBA-login my USB-keyboard is working, while using a wrong keyboard layout. I can neither use my magic touchpad nor an USB-mouse in PBA. Thus I can't change the keyboard layout located in the upper right corner. I tried unplugging all USB-devices except keyboard and mouse. Nothing seems to help and the mouse cursor isn't moving. How can I get magic trackpad or USB-mouse to work in PBA login screen or manually set the used keyboard layout in PBA? Update: Still no (USB-)mouse or bluetooth trackpad support in File Vault 2 Login Screen. Today I talked to Apple Support for over one hour with no result. Every idea is appreciated.

  Read the article

• Ubuntu Server upgrade over SSH hang

  - by Chris

  I was upgrading an Ubuntu server (using the do-release-upgrade) command over SSH (I know it's a bad idea, but it was the only choice; I don't have physical access to the server). It seemed to go fine and was going thru the 'setting up package name' part when it froze on the line Installing new version of config file /etc/mysql/debian-start ... The SSH connection appears to be still active, as pressing the up arrow echoes back ^[[A, and so on. When I log in on another SSH connection I can log in fine, but the ** system needs restart ** message shows up. Is it safe to ^C the release-upgrade command, or try to reboot the server? Should I ^C the upgrade and try it again? Anything else I could try?

  Read the article

• Change Block Tracking settings not retained for a VM on VMWare 5.5

  - by Chris

  I'm trying to enable Change Block Tracking as per this VMWare KB article but the setting ctkEnabled is not being retained in the advanced options or being added to the vmx file. The setting scsi0:0.ctkEnabled is being retained and I see a file vmname-ctk.vmdk in the datastore. I've verified that the vm doesn't have any snapshots but don't see any other suggestions in the KB (or google, of course.) Edit: The last comment on this community post. It's a slightly different circumstance, but suggests that there is an known bug editing these settings in the web-gui.

  Read the article

• How can I clear the "authentication cache" in Windows 7 to a password protected samba share?

  - by Chris Drumgoole

  I have a Linux samba server and have explicitly listed users that can access the folder. I have successfully congfigured Samba to require a username and password when accessing the share from windows (using the smbpasswd, etc.). But now I want to force clear the auth cache on the windows machine. Such as when I go to a colleague's computer, I use my account to access a file in the protected share, but then before I leave his computer, i'll want to make sure the authorization cache is cleared so he cannot access that folder with my credentials. I found the command to use in the windows command prompt on google a couple of weeks ago but silly me I didn't save it... Hope someone can help, thanks! Oh, Samba is configured as a workgroup and not a domain (if that helps) - so windows users do NOT log into a domain on start up. thanks!

  Read the article

• A list of games made for Mac computers

  - by Chris

  Hi all, Wondering if we could build a list of games that have been released for play natively on Mac OS X 10.x Intel! One game per reply, please

  Read the article

• Windows 7 Explorer shortcut for "Replace All"

  - by chris

  I you copy/paste some files into a directory that already contains files with the same name you'll get a confirmation dialog "There is already a file with the same name in this location..." To replace all files you have to check "Do this for the next N conflicts" and then click on "Copy and Replace". Is there a keyboard shortcut for this (like there was in XP where you could simply press 'a')?

  Read the article

• Is it possible to check an MP3 for data corruption?

  - by Chris

  I was listening to some older mp3s today and I released that some of my songs have pops and cracks in them. I assume this means that the file has some bad blocks. Is there software/script/etc that I can run on my entire library and find the music with these artifacts? Thanks!

  Read the article

• SharePoint (2010) - Can't delete Service Application

  - by Chris W

  The search service application in our farm went bonkers complaining that it couldn't connect to itself. After multiple people fiddling to try and fix it we've ended up with two search application. The new one, which is working perfectly, and the original one which is very unhappy. I've tried deleting the original Search App in Central Admin but it just won't go - it sits on the screen saying "Processing" but it never completes regardless of how long it is left. There's lot's happening in the logs but I can't really decipher exactly why this isn't working. Things are working fine within the farm but I'd ideally like to clean up this old application if possible. Are there any other options like deleting it with stsadm? I've had a dig but can't seem to find the commands to enumerate the service applications and then delete the correct one.

  Read the article

• 750Gig Hard Drive shows full with only 315Gigs used

  - by Chris Kelly

  I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

  Read the article

• Where to set java heap options (e.g. -Xmx) for Tomcat 6 under Ubuntu 9.04?

  - by Chris

  I'm running Tomcat using the tomcat6 package from Ubuntu 9.04, which makes a daemon out of Tomcat using jsvc. I'd like to know the proper way to set Java heap options like -Xmx for Tomcat. I'd like to put the configuration wherever is most stylistically correct, and wherever is least likely to be overwritten by Ubuntu package updates. The options I see right now: Hard-code them somewhere in /etc/init.d/tomcat6. Hard-code them somewhere in /usr/share/tomcat6/bin/catalina.sh. Create a line in /usr/share/tomcat6/bin/startup.sh to set CATALINA_OPTS to have the desired flags, and then export CATALINA_OPTS as an environment variable. (This looks like it will get picked up by catalina.sh.) The last option sounds like the best one, and it's advocated (without explanation of why) at http://serverfault.com/questions/121038/increasing-javas-heapspace-in-tomcat-startup-script. But I wanted to get a second opinion. Anyone want to confirm that there isn't a better way?

  Read the article

• Simple server status page hosted externally available for users

  - by Chris

  I am looking for any kind of script - can be asp or php or any other web language - that gives me the ability to log outages and the current state of the network for our organisation. This would be similar to any major Telco's "Network Status" page, but I just want to tell the user's out there if the systems are up and running and have a history of recent outages. This would be for our remote user's so they could go to a webpage (externally hosted from our main site) and see that we are currently having problems with our network. What are other people out there using?

  Read the article

• Virtualized Development Server for simulating 3-Tier Environment

  - by chris.cyvas

  Hello, I am thinking about buying a new server based development box for development (redundantly redundant, I know ;)). Ideally, I want to run something like ESXi or Xen Hypervisor at the lowest level. Then I want to add (at least) 5 Linux VM's for the following uses: 2 Web Servers 2 Application Servers 1 Database Server I want to load balance the 2 web servers and the 2 application servers and (somewhat obviously) they need to be all networked together to simulate a production environment. Also, it used to be the case that the recommendation was to put each VM on it's own hard drive, but I'm not sure that holds water anymore. Any advice? Does anyone have any advice on how to pull this off? Gotchya's, LookOuts!, etc? Thanks!

  Read the article

• Java plugin doesn't work in Chrome -- how can I fix this?

  - by Chris Farmer

  This used to work fine until a week or so ago, and I am not sure what has changed since then. I have just uninstalled what seems to be all the JVM stuff on my machine and reinstalled with the latest recommended Java version from java.com (1.6, update 23). The plugin works fine in IE and Firefox, but in Chrome it fails and the pages that try to use the plugin act as if Java is not installed. I have tried this in both Chrome 8 and Chrome 9 with the same result. How can I diagnose and fix this?

  Read the article

• Hard Drive Won't Boot After OS Install

  - by Chris

  This is my step by step process on a Dell Inspiron 6000 with a brand new 320 HD: Turn on Laptop Insert Xubuntu 9.1 disc Boot to CD-rom After boot has finished, I install and instance of Xubuntu on the machine After install (without any errors), I reboot the the machine On reboot, the BIOS claims to be unable to read from device What could this be? (Feel free to ask for more information to perform a proper diagnosis)

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >