Search Results

Search found 2123 results on 85 pages for 'crossover cable'.

Page 62/85 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• Internet Connectivity... Help please!

  - by James

  Hi. My Laptop is having trouble connecting to my wireless router. Other laptops are using the wireless, but it's not reached capacity. The laptop recognises (with a strong signal) that there is wireless internet, and I can connect via the router with a cable because this happens automatically. My problem is this... When I click "connect" (for example in the network and sharing centre), the dialogue box closes and nothing else happens - as though "connect" is being read as "exit". I am running Vista on a Toshiba Satellite Pro P300. Any help would be very much appreciated, Thanks

  Read the article

• Video streaming over multi display units

  - by ramdaz

  We have to share video across around 4/8 terminals at a public facility where we need to display live video from within the facility, as well as display messages(advertisements), and also play videos(not live) which need to be controlled centrally from another location. We can do central location handling over Internet, over ssh. What we want to do is connect cameras to a computer, and use the computer to display over multiple display units. We need to do live titling if possible. Once the live local telecast which usually takes about an hour or two a day, we would like to play other videos locally off the PC server. Preferably everything should run off Linux, since budgets are very constrained.... Addendum -- Its not over WAN, it's over a local area. I prefer not using LAN, we would rather use co-axial cable if possible. The reason is if it's LAN, I need some kind of an Networking device, at least a thin client

  Read the article

• Controlling TV Channel Through Computer

  - by killianmcc

  I'm passing my TV input through my computer so that I can use the video stream in an application I'm creating which then outputs to my TV. E.g. Sky Digibox/FreeView box - Laptop - TV Where on my laptop I'll be using the stream in a WPF application so I can overlay XAML objects onto it. My question is, what would be the best way for me to send the signal back to the box to say change the channel for example? I don't want to have to use the remote, I want the computer to handle everything. Is there a standard cable these boxes have that could take what would normally be a remote control signal and use that as input instead? Or would I have to go down the route of looking at some sort of Infared LED to send the signal recreating the remote? Apologies if this is not clear enough, let me know and I'll try and be more precise.

  Read the article

• ViewSonic LCD Monitor Touch-input

  - by Synetech inc.

  I bought a used 15" ViewSonic LCD monitor (VP150m) and noticed that it has a 3.5mm connector on the back labeled “touch i/o”. I’m trying to figure out how to use the touch function but am having trouble finding anything useful. First, I cannot find any information on what kind of cable it uses (TS, TRS, TRRS, etc.), or how to connect it to the computer. Second, I cannot find touch drivers for it—though I can find a page that mentions how easy it is to install them. Does anyone have any information on using the touchscreen function of the VP150m? Thanks a lot.

  Read the article

• How to force a hard drive to shut down

  - by Phenom

  I have a hard drive in my computer that I'm not using. I want Windows 7 to shut it down. I don't want to have to manually remove the cable. (The reason is that for some strange reason my computer will not boot if it's not connected. disk boot failure after upgrading power supply) I know that Windows 7 will shut it down after a certain period of time of it not being used. How can I force it to shut down without having to wait for this?

  Read the article

• External disk not working with Mac OS X 10.5

  - by ctx2002

  Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

  - by tnorthcutt

  I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

  Read the article

• Windows 8.1 triple monitors - can't enable all 3 at the same time

  - by Jeckerson

  Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Destination host unreachable

  - by user1010101

  I have 2 router connected to 1 switch which contains two vlans, 1 router has the ip table of vlan1 and the other router have the ip table of vlan2 I have trunked both router cable to the switch. I have set 1 ip table per router which correspond to the ip address of the PC that have this router address as a gateway. When I ping from 192.168.100.2 to 192.168.200.2 it tells me that destination host is unreachable and the message is from the router 192.168.100.1. So I guess router for 192.168.100.x does not see the router for 192.168.200.x , right ? Or am I wrong ? What are good troubleshooting steps ? http://i.imgur.com/b94Ir.png is the representation of the network, i cannot post image since im not reputated enough.

  Read the article

• Wifi Signal Strengths

  - by Phorce

  I hope that I have asked this question in the right topic. Basically I use BT (In the U.K.) and I have problems with my router receiving a strong signal in certain rooms of the house, which, therefore makes the internet really slow in some cases it won't work at all. I have had experience working with Virgin Media (UK) before and just changed the channel number and this worked fine, but, do not know if I would receive the same outcome on BT. Could anyone suggest any other things that I could try alongside of the channel change in order to /hopefully/ get a stronger signal, without having to install Ethernet cable?

  Read the article

• Can Kies provide a data connection so my phone can avoid mobile data usage?

  - by Highly Irregular

  I regularly connect my Samsung phone by USB cable to my PC to charge it up, and when I run the Samsung Kies app on the PC I can sync data too. Is it possible for my phone to use my PCs internet connection through the USB link to avoid data charges? I don't have a wifi connection available. It would make sense if Kies could provide this, or perhaps there's some other way I can achieve it without wifi, such as using Bluetooth. I have a Samsung GT-S7500, though this question should apply to many other models.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >