Search Results

Search found 7592 results on 304 pages for 'dev g'.

Page 62/304 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Extending partition on linux gparted but not more space in the vm

    - by Asken
    I have a vm test installation of a linux running a build server. Unfortunately I just pressed ok when adding the disk and ended up with an 8gb drive to play with. Well into the test the builds are consuming more and more space, of course. The vm drive was resized to 21gb and using gparted I expanded the drive partitions and that all worked fine but when I go back into the console and do df there's still only 8gb available. How can I claim the other 13gb I added? fdisk -l Disk /dev/sda: 21.0 GB, 20971520000 bytes 255 heads, 63 sectors/track, 2549 cylinders, total 40960000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006d284 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 40959999 20229121 5 Extended /dev/sda5 501760 40959999 20229120 8e Linux LVM vgdisplay --- Volume group --- VG Name ct System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 19.29 GiB PE Size 4.00 MiB Total PE 4938 Alloc PE / Size 1977 / 7.72 GiB Free PE / Size 2961 / 11.57 GiB VG UUID MwiMAz-52e1-iGVf-eL4f-P5lq-FvRA-L73Sl3 lvdisplay --- Logical volume --- LV Name /dev/ct/root VG Name ct LV UUID Rfk9fh-kqdM-q7t5-ml6i-EjE8-nMtU-usBF0m LV Write Access read/write LV Status available # open 1 LV Size 5.73 GiB Current LE 1466 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Name /dev/ct/swap_1 VG Name ct LV UUID BLFaa6-1f5T-4MM0-5goV-1aur-nzl9-sNLXIs LV Write Access read/write LV Status available # open 2 LV Size 2.00 GiB Current LE 511 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1

    Read the article

  • Doesn't work Nginx + SSI

    - by boopidoopi
    I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

    Read the article

  • When using software RAID and LVM on Linux, which IO scheduler and readahead settings are honored?

    - by andrew311
    In the case of multiple layers (physical drives - md - dm - lvm), how do the schedulers, readahead settings, and other disk settings interact? Imagine you have several disks (/dev/sda - /dev/sdd) all part of a software RAID device (/dev/md0) created with mdadm. Each device (including physical disks and /dev/md0) has its own setting for IO scheduler (changed like so) and readahead (changed using blockdev). When you throw in things like dm (crypto) and LVM you add even more layers with their own settings. For example, if the physical device has a read ahead of 128 blocks and the RAID has a readahead of 64 blocks, which is honored when I do a read from /dev/md0? Does the md driver attempt a 64 block read which the physical device driver then translates to a read of 128 blocks? Or does the RAID readahead "pass-through" to the underlying device, resulting in a 64 block read? The same kind of question holds for schedulers? Do I have to worry about multiple layers of IO schedulers and how they interact, or does the /dev/md0 effectively override underlying schedulers? In my attempts to answer this question, I've dug up some interesting data on schedulers and tools which might help figure this out: Linux Disk Scheduler Benchmarking from Google blktrace - generate traces of the i/o traffic on block devices Relevant Linux kernel mailing list thread

    Read the article

  • Optimize Apache performance

    - by Phliplip
    I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

    Read the article

  • Failed Software RAID0 on Linux - Attempting to recover data

    - by Gizmo_the_Great
    I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

    Read the article

  • Xenserver 5.6 SR_BACKEND_FAILURE_47 no such volume group, but it is there

    - by Juan Carlos
    I've looked everywhere (Google, here, a bunch of other sites), and while I have found people with similar problems, I couldn't find a single one with a solution to this. Last night our xenserver 5.6 box corrupted the /var/xapi/state.db, and I couldn't fix the xml, no matter what I did. After a good hour fiddling with the file, I figured it would be faster to just reinstall. The server had one 2tb hard drive running Xen and its VMs, and since Xen's install said it would erase the hard drive it was installed on, I plugged a new harddrive and installed Xen on it, without selecting any hard drives for storage. I Figured I could make it happen after install, using the partition on the old harddrive with all my VMs on it. After instalation finished and the system booted I did: #fdisk -l found the old partition at /dev/sda3 #ll /dev/disk/by-id found the partition at /dev/disk/by-id/scsi-3600188b04c02f100181ab3a48417e490-part3 #xe host-list uuid ( RO) : a019d93e-4d84-4a4b-91e3-23572b5bd8a4 name-label ( RW): xenserver-scribfourteen name-description ( RW): Default install of XenServer #pvscan PV /dev/sda3 VG VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d lvm2 [1.81 TB / 204.85 GB free] Total: 1 [1.81 TB] / in use: 1 [1.81 TB] / in no VG: 0 [0 ] #vgscan Reading all physical volumes. This may take a while... Found volume group "VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d" using metadata type lvm2 # pvdisplay --- Physical volume --- PV Name /dev/sda3 VG Name VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d PV Size 1.81 TB / not usable 6.97 MB Allocatable yes PE Size (KByte) 4096 Total PE 474747 Free PE 52441 Allocated PE 422306 PV UUID U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW # xe sr-introduce name-label="VMs" type=lvm uuid=U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW name-description="VMs Local HD Storage" content-type=user shared=false device-config=:device=/dev/disk/by-id/scsi-3600188b04c02f100181ab3a483f9f0ae-part3 U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW # xe pbd-create host-uuid=a019d93e-4d84-4a4b-91e3-23572b5bd8a4 sr-uuid=U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW device-config:device=/dev/disk/by-id/scsi-3600188b04c02f100181ab3a483f9f0ae-part3 adf92b7f-ad40-828f-0728-caf94d2a0ba1 # xe pbd-plug uuid=adf92b7f-ad40-828f-0728-caf94d2a0ba1 Error code: SR_BACKEND_FAILURE_47 Error parameters: , The SR is not available [opterr=no such volume group: VG_XenStorage-U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW] At this point I did a # vgrename VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d VG_XenStorage-U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW cause the VG name was different, but pdb-plug still gives me the same error. So, now I'm kinda lost about what to do, I'm not used to Xen and most sites I've been finding are really unhelpful. I hope someone can guide me in the right way to fix this. I cant lose those VMs (got backups, but from inside the guests, not the VMs themselves).

    Read the article

  • Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

    - by John Millikin
    I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

    Read the article

  • Ubuntu 13.10 Symfony installation date time issue

    - by Sambo
    I'm installing Symfony on my Ubuntu system, everything was going fine until the very last moment when I was met with a screen that said: ContextErrorException: Warning: date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/symfony-test/app/cache/dev/classes.php line 5107 in /var/www/symfony-test/app/cache/dev/classes.php line 5107 at ErrorHandler->handle('2', 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.', '/var/www/symfony-test/app/cache/dev/classes.php', '5107', array('level' => '100', 'message' => 'Notified event "kernel.exception" to listener "Symfony\Component\HttpKernel\EventListener\ProfilerListener::onKernelException".', 'context' => array())) at date_default_timezone_get() in /var/www/symfony-test/app/cache/dev/classes.php line 5107 at Logger->addRecord('100', 'Notified event "kernel.exception" to listener "Symfony\Component\HttpKernel\EventListener\ProfilerListener::onKernelException".', array()) in /var/www/symfony-test/app/cache/dev/classes.php line 5193 at Logger->debug('Notified event "kernel.exception" to listener "Symfony\Component\HttpKernel\EventListener\ProfilerListener::onKernelException".') in /var/www/symfony-test/vendor/symfony/symfony/src/Symfony/Component/HttpKernel/Debug/TraceableEventDispatcher.php line 246 at TraceableEventDispatcher->preListenerCall('kernel.exception', array(object(ProfilerListener), 'onKernelException')) in /var/www/symfony-test/vendor/symfony/symfony/src/Symfony/Component/HttpKernel/Debug/TraceableEventDispatcher.php line 448 at TraceableEventDispatcher->Symfony\Component\HttpKernel\Debug\{closure}(object(GetResponseForExceptionEvent)) at call_user_func(object(Closure), object(GetResponseForExceptionEvent)) in /var/www/symfony-test/app/cache/dev/classes.php line 1667 at EventDispatcher->doDispatch(array(object(Closure), object(Closure)), 'kernel.exception', object(GetResponseForExceptionEvent)) in /var/www/symfony-test/app/cache/dev/classes.php line 1600 at EventDispatcher->dispatch('kernel.exception', object(GetResponseForExceptionEvent)) in /var/www/symfony-test/app/cache/dev/classes.php line 1764 at ContainerAwareEventDispatcher->dispatch('kernel.exception', object(GetResponseForExceptionEvent)) in /var/www/symfony-test/vendor/symfony/symfony/src/Symfony/Component/HttpKernel/Debug/TraceableEventDispatcher.php line 139 at TraceableEventDispatcher->dispatch('kernel.exception', object(GetResponseForExceptionEvent)) in /var/www/symfony-test/app/bootstrap.php.cache line 2870 at HttpKernel->handleException(object(ContextErrorException), object(Request), '1') in /var/www/symfony-test/app/bootstrap.php.cache line 2823 at HttpKernel->handle(object(Request), '1', true) in /var/www/symfony-test/app/bootstrap.php.cache line 2947 at ContainerAwareHttpKernel->handle(object(Request), '1', true) in /var/www/symfony-test/app/bootstrap.php.cache line 2249 at Kernel->handle(object(Request)) in /var/www/symfony-test/web/app_dev.php line 28 After many hours of trying ideas in other threads, editing php.ini and classes.php to something that might work, I have gotten absolutely nowhere! Has anyone else had this problem

    Read the article

  • Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

    - by Tong Wang
    I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

    Read the article

  • How retrive full path with file name or folder name in Delphi 2010

    - by Dev
    Sir, I create a project, where I use ShellTreeView, ShellListView, ListView. Now I drag folder from ShellTreeView and files from ShellListView. Now I want to retrieve file name including full path (like: c:\abc\file.txt) or folder (like C:\abc). For retrieving the path I use a command button and a text box. What will the code? Dev

    Read the article

  • CakePHP - Controller url

    - by teepusink
    Hi, I just setup CakePHP on my local machine. When I do http://dev.local/categories/index, that works. However, http://dev.local/categories does not work. How do I make sure that http://dev.local/categories will give the same content as http://dev.local/categories/index? Thanks, Tee

    Read the article

  • How to get a cell value in JQGrid?

    - by dev
    How to get a cell value in JQGrid? If I use the following syntax – var ret = jQuery("#MyGrid").jqGrid('getRowData', id); ret = ret.ProductId; it returns the following HTML. I actually need the value of the cell. Thanks. Dev

    Read the article

  • prevent filesystem from entering read-only mode

    - by user788171
    I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

    Read the article

  • Linux Fiber Channel Host Setup Basic

    - by Jim
    I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

    Read the article

  • can't use periods in ServerName [Lion Apache installation]

    - by punchfacechamp
    I can access my host like this… http://keggyshop but can't use periods… http://keggyshop.dev here's my virtual host directive… <VirtualHost *:80> ServerName keggyshop ServerAlias keggyshop.dev DocumentRoot "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public" <Directory "~/sites/2012/keggy/web/pages/keggy/120528/sandbox/public"> Options Includes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> host file 127.0.0.1 keggyshop 127.0.0.1 keggyshop.dev traceroute for keggyshop… user$ traceroute keggyshop traceroute to keggyshop (192.168.1.184), 64 hops max, 52 byte packets 1 keggyshop (192.168.1.184) 1.188 ms 0.683 ms 0.747 ms traceroute for keggyshop.dev… user$ traceroute keggyshop.dev traceroute: Warning: keggyshop.dev has multiple addresses; using 184.106.15.239 traceroute to keggyshop.dev (184.106.15.239), 64 hops max, 52 byte packets 1 * 192.168.1.1 (192.168.1.1) 0.856 ms 0.568 ms 2 10.81.192.1 (10.81.192.1) 15.232 ms 7.002 ms 7.936 ms 3 gig-0-3-0-6-nycmnya-rtr2.nyc.rr.com (24.29.97.122) 7.962 ms 7.813 ms 7.712 ms 4 bun101.nycmnytg-rtr001.nyc.rr.com (184.152.112.107) 10.999 ms 14.001 ms 15.466 ms 5 bun6-nycmnytg-rtr002.nyc.rr.com (24.29.148.250) 11.231 ms 17.321 ms 12.745 ms 6 107.14.19.24 (107.14.19.24) 13.972 ms 11.704 ms 16.477 ms 7 ae-1-0.pr0.nyc30.tbone.rr.com (66.109.6.161) 9.237 ms 11.896 ms 107.14.19.153 (107.14.19.153) 7.481 ms 8 xe-5-0-6.ar2.ewr1.us.nlayer.net (69.31.94.57) 16.682 ms 11.791 ms 11.981 ms 9 ae3-90g.cr1.ewr1.us.nlayer.net (69.31.94.117) 12.977 ms 15.706 ms 9.709 ms 10 xe-5-0-0.cr1.ord1.us.nlayer.net (69.22.142.74) 30.473 ms 30.497 ms 31.750 ms 11 ae1-20g.ar1.ord6.us.nlayer.net (69.31.110.250) 36.699 ms 50.785 ms 35.957 ms 12 as19994.xe-1-0-7.ar1.ord6.us.nlayer.net (69.31.110.242) 34.723 ms 31.118 ms 29.967 ms 13 coreb.ord1.rackspace.net (184.106.126.138) 30.471 ms corea.ord1.rackspace.net (184.106.126.136) 33.392 ms 35.210 ms 14 core1-coreb.ord1.rackspace.net (184.106.126.129) 32.453 ms core1-corea.ord1.rackspace.net (184.106.126.125) 32.020 ms core1-coreb.ord1.rackspace.net (184.106.126.129) 32.417 ms 15 core1-aggr401a-3.ord1.rackspace.net (173.203.0.157) 31.274 ms 34.854 ms 30.194 ms

    Read the article

  • Recover harddrive data

    - by gameshints
    I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

    Read the article

  • How do I tell mdadm to start using a missing disk in my RAID5 array again?

    - by Jon Cage
    I have a 3-disk RAID array running in my Ubuntu server. This has been running flawlessly for over a year but I was recently forced to strip, move and rebuild the machine. When I had it all back together and ran up Ubuntu, I had some problems with disks not being detected. A couple of reboots later and I'd solved that issue. The problem now is that the 3-disk array is showing up as degraded every time I boot up. For some reason it seems that Ubuntu has made a new array and added the missing disk to it. I've tried stopping the new 1-disk array and adding the missing disk, but I'm struggling. On startup I get this: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d1 : inactive sdf1[2](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] I have two RAID arrays and the one that normally pops up as md1 isn't appearing. I read somewhere that calling mdadm --assemble --scan would re-assemble the missing array so I've tried first stopping the existing array that ubuntu started: root@uberserver:~# mdadm --stop /dev/md_d1 mdadm: stopped /dev/md_d1 ...and then tried to tell ubuntu to pick the disks up again: root@uberserver:~# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 2 drives (out of 3). So that's started md1 again but it's not picking up the disk from md_d1: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid5 sde1[1] sdf1[2] 3907023872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] md_d1 : inactive sdd1[0](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] What's going wrong here? Why is Ubuntu trying to pick up sdd into a different array? How do I get that missing disk back home again? [Edit] - After adding the md1 to mdadm.conf it now tries to mount the array on startup but it's still missing the disk. If I tell it to try and assemble automatically I get the impression it know it needs sdd but can't use it: root@uberserver:~# mdadm --assemble --scan /dev/md1: File exists mdadm: /dev/md/1 already active, cannot restart it! mdadm: /dev/md/1 needed for /dev/sdd1... What am I missing?

    Read the article

  • AST generation for a an application developed both in visual basic and c#

    - by Dev
    Hi, I'm currently understanding one application developed both in visual basic and c#. Running through the code is getting tough as code is around 50KLOC. So i'm planning for generation of AST (abstract syntax tree). Will it be possible to generate for both language together. Atleast a call graph generation will be helpful (but can't find any tool which works for both languages) Please let me know if this question is confusing. Thanks in Advance Dev

    Read the article

  • Can not get sound over hdmi in kubuntu 9.10

    - by user32509
    I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

    Read the article

  • USB hard drive not recognized

    - by user318772
    Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

    Read the article

  • mdadm raid1 fails to resync

    - by JuanD
    Hello, I'm trying to solve this problem I'm having with an mdadm raid1. I have an ubuntu 9.04 server running on a software 2-drive raid1 with mdadm. Yesterday, one of the drives failed, and so I replaced it with a brand new drive of the same size. I removed the faulty drive, copied the partition from the remaining good drive to the new drive and then added it to the raid. It re-synced and the system worked fine, until the drive that hadn't failed, was also labeled failed. Now I had the raid running solely on the new drive. So I purchased another drive and repeated the procedure above. So now I had 2 brand new drives and the raid was syncing. However, after a few minutes I checked /proc/mdstat and the raid was no longer syncing. mdadm --detail /dev/md1 shows: (sdb is the first new drive, and sdc is the second new drive) root@dola:/home/jjaramillo# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Sat Dec 20 00:42:05 2008 Raid Level : raid1 Array Size : 974711680 (929.56 GiB 998.10 GB) Used Dev Size : 974711680 (929.56 GiB 998.10 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Jun 2 10:09:35 2010 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : bba497c6:5029ba0b:bfa4f887:c0dc8f3d Events : 0.5395594 Number Major Minor RaidDevice State 2 8 35 0 spare rebuilding /dev/sdc3 1 8 19 1 active sync /dev/sdb3 I've tried removing and re-adding the drive a few times, but the same thing happens. The raid fails to resync. I've looked at /var/log/messages, and found the following: Jun 2 07:57:36 dola kernel: [35708.917337] sd 5:0:0:0: [sdb] Unhandled sense code Jun 2 07:57:36 dola kernel: [35708.917339] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 2 07:57:36 dola kernel: [35708.917342] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor] Jun 2 07:57:36 dola kernel: [35708.917346] Descriptor sense data with sense descriptors (in hex): Jun 2 07:57:36 dola kernel: [35708.917348] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 Jun 2 07:57:36 dola kernel: [35708.917357] 00 43 9e 47 Jun 2 07:57:36 dola kernel: [35708.917360] sd 5:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed So it looks like there's some kind of error on sdb (the first new drive). My question is, what would be the best approach to get the raid up and running again? I've thought about dd'ing the /dev/md1 to a blank hard drive, then re-doing the raid from scratch and loading the data back, but there could be an easier solution.. Any help would be appreciated.

    Read the article

  • How to connect PHPMyadmin DB by creating the batch file.

    - by Dev
    Hi All, I have created the sql file to create table in DB, I am using PHPMYAdmin But i am not able to connect to the DB, I want to run this as Batch file. If i try to MYSQL from command prompt it give error as 'mysql' is not recognized as an internal or external command, operable program or batch file. Regards, Dev

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >