green threads - Page 62

GDB breakpoint problems attaching to QEMU

- by Rickard von Essen

Hi, I have the following problem. When I connect gdb to qemu for debugging it won't break on breakpoints. I can set breakpoints, break with ctrl-c etc. Any clues how this can be fixed? I have: $ qemu --version QEMU PC emulator version 0.11.0 (qemu-kvm-0.11.0), Copyright (c) 2003-2008 Fabrice Bellard $ gdb --version GNU gdb (GDB) 7.0-ubuntu. This GDB was configured as "x86_64-linux-gnu". This is an example session: (And yes this is pintos) gdb -x src/misc/gdb-macros kernel.o GNU gdb (GDB) 7.0-ubuntu Copyright (snip...) License (snip...) This GDB was configured as "x86_64-linux-gnu". Reading symbols from ../../threads/build/kernel.o...done. (gdb) debugpintos 0x0000fff0 in ?? () (gdb) break main Breakpoint 1 at 0xc01000b6: file ../../threads/init.c, line 68. (gdb) info break Num Type Disp Enb Address What 1 breakpoint keep y 0xc01000b6 in main at ../../threads/init.c:68 (gdb) cont Continuing. Remote connection closed Any ideas are welcome.

Read the article

Redmine install not working and displaying directory contents - Ubuntu 10.04

- by Casey Flynn

I've gone through the steps to set up and install the redmine project tracking web app on my VPS with Apache2 but I'm running into a situation where instead of displaying the redmine app, I just see the directory contents: Does anyone know what could be the problem? I'm not sure what other files might be of use to diagnose what's going on. Thanks! # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ # Enable fastcgi for .fcgi files # (If you're using a distro package for mod_fcgi, something like # this is probably already present) #<IfModule mod_fcgid.c> # AddHandler fastcgi-script .fcgi # FastCgiIpcDir /var/lib/apache2/fastcgi #</IfModule> LoadModule fcgid_module /usr/lib/apache2/modules/mod_fcgid.so LoadModule passenger_module /var/lib/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so PassengerRoot /var/lib/gems/1.8/gems/passenger-3.0.7 PassengerRuby /usr/bin/ruby1.8 ServerName demo and my vhosts file #No DNS server, default ip address v-host #domain: none #public: /home/casey/public_html/app/ <VirtualHost *:80> ServerAdmin webmaster@localhost # ScriptAlias /redmine /home/casey/public_html/app/redmine/dispatch.fcgi DirectoryIndex index.html DocumentRoot /home/casey/public_html/app/public <Directory "/home/casey/trac/htdocs"> Order allow,deny Allow from all </Directory> <Directory /var/www/redmine> RailsBaseURI /redmine PassengerResolveSymlinksInDocumentRoot on </Directory> # <Directory /> # Options FollowSymLinks # AllowOverride None # </Directory> # <Directory /var/www/> # Options Indexes FollowSymLinks MultiViews # AllowOverride None # Order allow,deny # allow from all # </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /home/casey/public_html/app/log/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /home/casey/public_html/app/log/access.log combined # Alias /doc/ "/usr/share/doc/" # <Directory "/usr/share/doc/"> # Options Indexes MultiViews FollowSymLinks # AllowOverride None # Order deny,allow # Deny from all # Allow from 127.0.0.0/255.0.0.0 ::1/128 # </Directory> </VirtualHost>

Read the article

Strange Jmeter connection refuse on Tomcat

- by Tommy

I tried difference setting in Jmeter and Tomcat. If the Threads number in JMeter is 1~200, Then tomcat is okay. If It is 300, Then after serving few requests, tomcat starts to output errors. Here is the error show in JMeter java.net.ConnectException: Connection refused: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at sun.net.NetworkClient.doConnect(Unknown Source) at sun.net.www.http.HttpClient.openServer(Unknown Source) at sun.net.www.http.HttpClient.openServer(Unknown Source) at sun.net.www.http.HttpClient.<init>(Unknown Source) at sun.net.www.http.HttpClient.New(Unknown Source) at sun.net.www.http.HttpClient.New(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source) at org.apache.jmeter.protocol.http.sampler.HTTPJavaImpl.sample(HTTPJavaImpl.java:483) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:62) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1018) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1004) at org.apache.jmeter.threads.JMeterThread.process_sampler(JMeterThread.java:411) at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:297) at java.lang.Thread.run(Unknown Source) My tomcat server.xml in eclipse  <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="2000" minSpareThreads="250" acceptCount="2000"/> <Connector executor="tomcatThreadPool" URIEncoding="UTF-8" connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443" /> Any idea why this is happening ? How do i check the server.xml is correctly used? It is a JSF2 application if it helps. Thanks in advance.

Read the article

Can't get simple Apache VHost up and running

- by TK Kocheran

Unfortunately, I can't seem to get a simple Apache VHost online. I used to simply have one VHost which bound to all: <VirtualHost *:80>, but this isn't appropriate for security anymore. I need to have one VHost for localhost requests (ie my dev server) and one for incoming requests via my domain name. Here's my new VHost: NameVirtualHost domain1.com <VirtualHost domain1.com:80> DocumentRoot /var/www ServerName domain1.com </VirtualHost> <VirtualHost domain2.com:80> DocumentRoot /var/www ServerName domain2.com </VirtualHost> After I restart my server, I see the following errors in my log: [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs What am I doing wrong? EDIT As per the answer give below, I have modified my configuration. Here are my configuration files: /etc/apache2/ports.conf: Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Here are my actual defined sites: /etc/apache2/sites-enabled/000-localhost: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerAdmin ######### DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 <Location /> <Limit GET POST PUT> order allow,deny allow from all deny from 65.34.248.110 deny from 69.122.239.3 deny from 58.218.199.147 deny from 65.34.248.110 </Limit> </Location> </VirtualHost> /etc/apache2/sites-enabled/001-rfkrocktk.dyndns.org: NameVirtualHost rfkrocktk.dyndns.org:80 <VirtualHost rfkrocktk.dyndns.org:80> DocumentRoot /var/www ServerName rfkrocktk.dyndns.org </VirtualHost> And, just for kicks, my main file: /etc/apache2/apache2.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ what else do I need to do to fix it? Should I be telling apache to listen on 127.0.0.1:80, or isn't it already listening there?

Read the article

Active FTP client blocked on Windows XP

- by Ian Hannah

Summary We have a FTP server (running in active mode). We have an FTP client which is connecting to the server, carrying out a task and then closing the connection. The FTP Client can perform this operation on multiple threads. Problem We have a situation where customers are experiencing occasional failures to carry out operations on a FTP connection. The actual connection has been made to the server but when the server attempts to return data on the data port if fails. Observations We have a simple test FTP client which is running two separate threads. Each thread is performing a recursive listing of files from a root directory. With the firewall running on the client machine the hang happens within a few minutes. If the firewall is turned off on the client machine, the test application seems to run correctly. This does point to a potential firewall issue. However, with the firewall on we can list files on our company FTP server without any issues. If the simple test FTP client runs a single thread then we do not experience any problems whether or not the firewall is turned on. We have another simple test FTP client which was running 4 threads (with each opening a new FTP connection, doing a directory listing and closing the FTP connection as fast as possible) overnight with the firewall turned off. With the firewall turned on it fails in a short space of time. The confusing thing is that if the test FTP client and the FTP server are run on the same machine the failure occurs even though the firewall is turned off. This means that the problem may not be firewall related. Any help with what this could be would be much appreciated. Thanks Ian

Read the article

FreeRADIUS Default Answer

- by jinanwow

We are using FreeRADIUS with a MySQL database, authenticating users. We ran into an issue where are MySQL database was slow causing the max number of threads to be reached. The issue with this is, when the server couldn't answer the requests as there were no threads avaiable, it sent the response of Access-Reject to the clients. Our devices cache client connections and periodically checks with the server to see if they should still be allowed or to remove them. The equipment is designed that if there is no response from the server and a client is connected it will remain connected. The issue is, when the radius server is at its max threads, its default answer is to send access-reject (verified via packet capture), however we would like to change the default behavior to just ignore the request (keeping the clients connected). We have fixed the MySQL database issue for now, but I would like to change the default from Access-Reject, to just ignore the client altogeather. I have done research, but not able to find an answer to the question. Thanks in Advance.

Read the article

Sendmail slow to accept emails

- by Rich

I have a PHP web app which is using SMTP to sendmail on localhost to send email. I would like sendmail to accept the mail request immediately and queue it for later sending, as I don't want to have user-facing request threads blocked on emails. Sendmail is installed with the default settings on RHEL web servers. Sometimes sendmail is blocking for a long time after the MAIL command is sent -- sometimes taking 60 or 90 seconds to accept the mail. The time take is usually very close to 60 or 90 sec, which makes me think this is some kind of timeout. I have looked in the sendmail logs, and there are plenty of "deferred" emails, but nothing which looks responsible for this delay. How can I diagnose what is slowing down sendmail? How can I configure sendmail to always accept the mail immediately and to queue the mail for later sending? Update: I'm not sure, but it looks like this might be linked to aol.com addresses. I strongly suspect that sendmail is doing some kind of blocking receipient address verification at the accept-email-for-sending stage. How can I disable that, so that sendmail doesn't block my UI threads? Update 2: This only seems to happen at busy times. Perhaps I am running out of sendmail threads or something? How can I check that?

Read the article

apache/httpd responds slower under EL6.1 than EL5.6 (centos)

- by daniel

I've read through other threads on performance differences between RHEL6 and RHEL5, but none seem a tight match to mine. My issue manifests itself in slightly slower average response time (20ms) per request. I have about 10/10 servers of the same hardware spec with Cent6.1 and Cent5.6. The issue is consistent across the group. I am running Ruby on Rails with Passenger. Apache config is identical (checked out from the same SVN repo) Ruby and Passenger are identical builds. Application is identical and being served traffic round robin. mod_worker An interesting clue from server-status: The Cent6.1 servers have a steady 20-40 threads in the "Reading Request" state while the Cent5.6 servers have around 1. I'm graphing this so I can see it trend over time. I also have a bunch of much newer machines that are significantly faster and are running Cent6.1. They dust all the older machines in response time, but I can see they also have a steady 20-40 threads in the "Reading Request" state. This makes me believe I can get their response time down, if I can figure out what is holding up these requests. My gut is telling me that I need to tune some network setting in sysctl, but I haven't figured it out yet. Help is appreciated.

Read the article

CSS: Style applied to a combination of classes?

- by Eli

Hi All, I'm not sure this is possible, but is there a syntax to be used in CSS when you want to style an element based on the combination of classes applied to it? I understand that I can check an element with jQuery or something and change it's style based on the classes it has, but is there a pure CSS way to do this? For example, if I have a class for bold and green: .bold_green { color:green; font-weight:bold; } And a class for bold and blue: .bold_blue { color:green; font-weight:bold. } Now, say I am using jQuery to add and remove classes dynamically and want any element that has both classes to turn italic pink. Something like: .bold_green AND .bold_blue { color:pink; font-style:italic; } Or, if I want to style an element that has aclass, and is a descendant of another element that has another class? Something like: .bold_green HAS_CHILD .bold_blue { color:black; background-color:yellow; } Thanks!

Read the article

setAnimationRepeatAutoreverses not behaved as I expected

- by danielkwan

I am starting to learn to use UIView animation. So I wrote the following lines: [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:2.0]; [UIView setAnimationRepeatCount:2]; [UIView setAnimationRepeatAutoreverses:YES]; CGPoint position = greenView.center; position.y = position.y + 100.0f; position.x = position.x + 100.0f; greenView.center = position; [UIView commitAnimations]; In this case, the UIView (a green box) moved back and fore 2 times. So far so good, BUT I found out that after the moving twice, the green box ended up jumped to the "new position" (position.x + 100.0f, position.y + 100.0f) instead of going back to the original position (position.x, position.y). That makes the animation look pretty odd (like after the box swing back to the original position caused by setAnimationRepeatAutoreverses, it jumps back to the new position in the last microsecond!) What is the best way to make the green box NOT jump to the new position at the very last minute?

Read the article

Jquery with multi level json data array

- by coder

Read the article

Filter entities that match all pairs

- by Jon

I have an entity (let's say Person) with a set of arbitrary attributes with a known subset of values. I need to search for all of these entities that match all my filter conditions. For example, my table structures look like this: Person: id | name 1 | John Doe 2 | Jane Roe 3 | John Smith Attribute: id | attr_name 1 | Sex 2 | Eye Color ValidValue: id | attr_id | value_name 1 | 1 | Male 2 | 1 | Female 3 | 2 | Blue 4 | 2 | Green 5 | 2 | Brown PersonAttributes id | person_id | attr_id | value_id 1 | 1 | 1 | 1 2 | 1 | 2 | 3 3 | 2 | 1 | 2 4 | 2 | 2 | 4 5 | 3 | 1 | 1 6 | 3 | 2 | 4 In JPA, I have entities built for all of these tables. What I'd like to do is perform a search for all entities matching a given set of attribute-value pairs. For instance, I'd like to be able to find all males (John Doe and John Smith), all people with green eyes (Jane Roe or John Smith), or all females with green eyes (Jane Roe). I see that I can already take advantage of the fact that I only really need to match on value_id, since that's already unique and tied to the attr_id. But where can I go from there?

Read the article

How do I display grouped XML data in a Flex pie chart?

- by mclaughlinj

I've looked into grouping XML data with GroupingCollections and AdvancedDataGrids, but I can't figure out how to display that data in a chart. Basically, what I want to do is group the data by the category field, which should give me two rows under red, one under blue, and one under green. When inputting this data into the pie chart, it should take up the right amount of space (1/2 for red, 1/4 each for blue and green). I don't need the other_data field, as I'd like to use the group name (category in this case) as the callout. Any suggestions? Sample data: <row> <category>red</category> <other_data>this shouldn't really matter</other_data> </row> <row> <category>blue</category> <other_data>this shouldn't really matter</other_data> </row> <row> <category>red</category> <other_data>this shouldn't really matter</other_data> </row> <row> <category>green</category> <other_data>this shouldn't really matter</other_data> </row>

Read the article

Using multiple aggregate functions in an (ANSI) SQL statement

- by morpheous

I have aggregate functions foo(), foobar(), fredstats(), barneystats() I want to create a domain specific query language (DSQL) above my DB, to facilitate using a domain language to query the DB. The 'language' comprises of algebraic expressions (or more specifically SQL like criteria) which I use to generate (ANSI) SQL statements which are sent to the db engine. The following lines are examples of what the language statements will look like, and hopefully, it will help further clarify the concept: **Example 1** DQL statement: foobar('yellow') between 1 and 3 and fredstats('weight') > 42 Translation: fetch all rows in an underlying table where computed values for aggregate function foobar() is between 1 and 3 AND computed value for AGG FUNC fredstats() is greater than 42 **Example 2** DQL statement: fredstats('weight') < barneystats('weight') AND foo('fighter') in (9,10,11) AND foobar('green') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 3** DQL statement: foobar('green') / foobar('red') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 4** DQL statement: foobar('green') - foobar('red') >= 42 Translation: Fetch all rows where the specified criteria matches Given the following information: The table upon which the queries above are being executed is called 'tbl' table 'tbl' has the following structure (id int, name varchar(32), weight float) The result set returns only the tbl.id, tbl.name and the names of the aggregate functions as columns in the result set - so for example the foobar() AGG FUNC column will be called foobar in the result set. So for example, the first DQL query will return a result set with the following columns: id, name, foobar, fredstats Given the above, my questions then are: What would be the underlying SQL required for Example1 ? What would be the underlying SQL required for Example3 ? Given an algebraic equation comprising of AGGREGATE functions, Is there a way of generalizing the algorithm needed to generate the required ANSI SQL statement(s)? I am using PostgreSQL as the db, but I would prefer to use ANSI SQL wherever possible.

Read the article

Rewrite arrays using collections

- by owca

I have a task, which I was able to do with the use of simplest methods - arrays. Now I'd like to go further and redo it using some more complicated java features like collections, but I've never used anything more complicated than 2d matrix. What should I look at and how to start with it. Should Tower become a Collection ? And here's the task : We have two classes - Tower and Block. Towers are built from Blocks. Ande here's sample code for testing: Block k1=new Block("yellow",1,5,4); Block k2=new Block("blue",2,2,6); Block k3=new Block("green",3,4,2); Block k4=new Block("yellow",1,5,4); Tower tower=new Tower(); tower.add(k1,k2,k3); "Added 3 blocks." System.out.println(tower); "block: green, base: 4cm x 3cm, thicknes: 2 cm block: blue, base: 6cm x 2cm, thicknes: 2 cm block: yellow, base: 5cm x 4cm, thicknes: 1 cm" tower.add(k2); "Tower already contains this block." tower.add(k4); "Added 1 block." System.out.println(tower); "block: green, base: 4cm x 3cm, thicknes: 2 cm block: blue, base: 6cm x 2cm, thicknes: 2 cm block: yellow, base: 5cm x 4cm, thicknes: 1 cm block: yellow, base: 5cm x 4cm, thicknes: 1 cm" tower.delete(k1); "Deleted 1 block" tower.delete(k1); "Block not in tower" System.out.println(tower); "block: blue, base: 6cm x 2cm, thicknes: 2 cm block: yellow, base: 5cm x 4cm, thicknes: 1 cm block: yellow, base: 5cm x 4cm, thicknes: 1 cm" Let's say I will treat Tower as a collection of blocks. How to perform search for specific block among whole collection ? Or should I use other interface ?

Read the article

CSS: Margin-top when parent's got no border

- by Manny

Hi, As you can see in this picture, I've got an orange div inside a green div with no top border. The orange div has a 30px top margin, but it's also pushing the green div down. Of course, adding a top border will fix the issue, but I need the green div to be top borderless. What could I do? html: <div class="header">Top</div> <div class="body"> <div class="container">Box</div> </div> <div class="foot">Bottom</div> css: .body { border: 1px solid black; border-top: none; border-bottom: none; width: 120px; height: 112px; background-color: lightgreen; } .body .container { background-color: orange; height: 50px; width: 50%; margin-top: 30px; } Thanks

Read the article

Match entities fulfilling filter (strict superset of search)

- by Jon

I have an entity (let's say Person) with a set of arbitrary attributes with a known subset of values. I need to search for all of these entities that match all my filter conditions. That is, given a set of Attributes A, I need to find all people that have a set of Attributes that are a superset of A. For example, my table structures look like this: Person: id | name 1 | John Doe 2 | Jane Roe 3 | John Smith Attribute: id | attr_name 1 | Sex 2 | Eye Color ValidValue: id | attr_id | value_name 1 | 1 | Male 2 | 1 | Female 3 | 2 | Blue 4 | 2 | Green 5 | 2 | Brown PersonAttributes id | person_id | attr_id | value_id 1 | 1 | 1 | 1 2 | 1 | 2 | 3 3 | 2 | 1 | 2 4 | 2 | 2 | 4 5 | 3 | 1 | 1 6 | 3 | 2 | 4 In JPA, I have entities built for all of these tables. What I'd like to do is perform a search for all entities matching a given set of attribute-value pairs. For instance, I'd like to be able to find all males (John Doe and John Smith), all people with green eyes (Jane Roe or John Smith), or all females with green eyes (Jane Roe). I see that I can already take advantage of the fact that I only really need to match on value_id, since that's already unique and tied to the attr_id. But where can I go from there? I've been trying to do something like the following, given that the ValidValue is unique in all cases: select distinct p from Person p join p.personAttributes a where a.value IN (:values) Then I've tried putting my set of required values in as "values", but that gives me errors no matter how I try to structure that. I also have to get a little more complicated, as follows, but at this point I'd be happy with solving the first problem cleanly. However, if it's possible, the Attribute table actually has a field for default value: id | attr_name | default_value 1 | Sex | 1 2 | Eye Color | 5 If the value you're searching on happens to be the default value, I want it to return any people that have no explicit value set for that attribute, because in the application logic, that means they inherit the default value. Again, I'm more concerned about the primary question, but if someone who can help with that also has some idea of how to do this one, I'd be extremely grateful.

Read the article

Custom UITableviewcell, CGGradient still shows when cell is selected?

- by Burnsoft Ltd

I'm using a custom tableview cell (like Tweetie's fast scrolling) i've added a gradient to the context, which looks really nice, but when I select the cell, the gradient is still visible. I'm not sure how to go about removing the gradient when the cell is selected? any ideas? cheers Nik - (void)drawContentView:(CGRect)r { CGContextRef context = UIGraphicsGetCurrentContext(); UIColor *backgroundColor = [UIColor whiteColor]; UIColor *textColor = [UIColor blackColor]; UIColor *dateColor = [UIColor colorWithRed:77.f/255.f green:103.f/255.f blue:155.f/255.f alpha:1]; if(self.selected) { backgroundColor = [UIColor clearColor]; textColor = [UIColor whiteColor]; } [backgroundColor set]; CGContextFillRect(context, r); //add gradient CGGradientRef myGradient; CGColorSpaceRef myColorspace; size_t num_locations = 2; CGFloat locations[2] = {0.0, 1.0}; CGFloat components[8] = {0.9f, 0.9f, 0.9f, 0.7f, // Bottom Colour: Red, Green, Blue, Alpha. 1.0f, 1.0f, 1.0f, 1.0}; // Top Colour: Red, Green, Blue, Alpha. myColorspace = CGColorSpaceCreateDeviceRGB(); myGradient = CGGradientCreateWithColorComponents (myColorspace, components, locations, num_locations); CGColorSpaceRelease(myColorspace); CGPoint startPoint, endPoint; startPoint.x = 0; startPoint.y = self.frame.size.height; endPoint.x = 0; endPoint.y = self.frame.size.height-15; // just keep the gradient static size, never mind how big the cell is CGContextDrawLinearGradient (context, myGradient, startPoint, endPoint, 0); CGGradientRelease(myGradient); //gradient end //rest of custom drawing goes here.... } Should I be doing something in the if cell selected code?

Read the article

Jquery addClass on radio box checked.

- by Zoltan Repas

I checked all the topics, but i simply don't know why my script does not work :( <script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.min.js"></script> <script type="text/javascript"> $('#pic').click(function() { $(this).parents("li").find(".green").removeClass("green"); if($(this).is(':checked')) { $(this).parents("ul").find("li").addClass('green'); } }); </script> etc... <ul> <li><input type="radio" name="pic" value="asd"/>asd</li> <li><input type="radio" name="pic" value="b"/>asd</li> <li><input type="radio" name="pic" value="ba"/>asd</li> <li><input type="radio" name="pic" value="bs"/>asd</li> <li><input type="radio" name="pic" value="bc"/>asd</li> </ul> Please help me!

Read the article

Combining aggregate functions in an (ANSI) SQL statement

- by morpheous

I have aggregate functions foo(), foobar(), fredstats(), barneystats() I want to create a domain specific query language (DSQL) above my DB, to facilitate using using a domain language to query the DB. The 'language' comprises of boolean expressions (or more specifically SQL like criteria) which I then 'translate' back into pure (ANSI) SQL and send to the underlying Db. The following lines are examples of what the language statements will look like, and hopefully, it will help further clarify the concept: **Example 1** DQL statement: foobar('yellow') between 1 and 3 and fredstats('weight') > 42 Translation: fetch all rows in an underlying table where computed values for aggregate function foobar() is between 1 and 3 AND computed value for AGG FUNC fredstats() is greater than 42 **Example 2** DQL statement: fredstats('weight') < barneystats('weight') AND foo('fighter') in (9,10,11) AND foobar('green') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 3** DQL statement: foobar('green') / foobar('red') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 4** DQL statement: foobar('green') - foobar('red') >= 42 Translation: Fetch all rows where the specified criteria matches Given the following information: The table upon which the queries above are being executed is called 'tbl' table 'tbl' has the following structure (id int, name varchar(32), weight float) The result set returns only the tbl.id, tbl.name and the names of the aggregate functions as columns in the result set - so for example the foobar() AGG FUNC column will be called foobar in the result set. So for example, the first DQL query will return a result set with the following columns: id, name, foobar, fredstats Given the above, my questions then are: What would be the underlying SQL required for Example1 ? What would be the underlying SQL required for Example3 ? Given an algebraic equation comprising of AGGREGATE functions, Is there a way of generalizing the algorithm needed to generate the required ANSI SQL statement(s)? I am using PostgreSQL as the db, but I would prefer to use ANSI SQL wherever possible.

Read the article

Explain this C# code: byte* p = (byte) (void) Scan0;

- by qulzam

I found the code from the net in which i cant understand this line:- byte* p = (byte*)(void*)Scan0; There Scan0 is System.IntPtr. It is code of C#.Net. Plz Explain the above line. The complete code is given below. this is code to convert a image in grayscale. public static Image GrayScale(Bitmap b) { BitmapData bmData = b.LockBits(new Rectangle(0, 0, b.Width, b.Height), ImageLockMode.ReadWrite, PixelFormat.Format24bppRgb); int stride = bmData.Stride; System.IntPtr Scan0 = bmData.Scan0; unsafe { byte* p = (byte*)(void*)Scan0; int nOffset = stride - b.Width * 3; byte red, green, blue; for (int y = 0; y < b.Height; ++y) { for (int x = 0; x < b.Width; ++x) { blue = p[0]; green = p[1]; red = p[2]; p[0] = p[1] = p[2] = (byte)(.299 * red + .587 * green + .114 * blue); p += 3; } p += nOffset; } } b.UnlockBits(bmData); return (Image)b; } I understand all the code but only have the problem on this line. byte* p = (byte*)(void*)Scan0;

Read the article

Fluently setting C# properties and chaining methods

- by John Feminella

I'm using .NET 3.5. We have some complex third-party classes which are automatically generated and out of my control, but which we must work with for testing purposes. I see my team doing a lot of deeply-nested property getting/setting in our test code, and it's getting pretty cumbersome. To remedy the problem, I'd like to make a fluent interface for setting properties on the various objects in the hierarchical tree. There are a large number of properties and classes in this third-party library, and it would be too tedious to map everything manually. My initial thought was to just use object initializers. Red, Blue, and Green are properties, and Mix() is a method that sets a fourth property Color to the closest RGB-safe color with that mixed color. Paints must be homogenized with Stir() before they can be used. Bucket b = new Bucket() { Paint = new Paint() { Red = 0.4; Blue = 0.2; Green = 0.1; } }; That works to initialize the Paint, but I need to chain Mix() and other methods to it. Next attempt: Create<Bucket>(Create<Paint>() .SetRed(0.4) .SetBlue(0.2) .SetGreen(0.1) .Mix().Stir() ) But that doesn't scale well, because I'd have to define a method for each property I want to set, and there are hundreds of different properties in all the classes. Also, C# doesn't have a way to dynamically define methods prior to C# 4, so I don't think I can hook into things to do this automatically in some way. Third attempt: Create<Bucket>(Create<Paint>().Set(p => { p.Red = 0.4; p.Blue = 0.2; p.Green = 0.1; }).Mix().Stir() ) That doesn't look too bad, and seems like it'd be feasible. Is this an advisable approach? Is it possible to write a Set method that works this way? Or should I be pursuing an alternate strategy?

Read the article

Fill parent container

- by manix

After several hours of design battle I come to you for a hand. I am building a website for a night club as you can see. I can't get stretch the centered area (bordered by yellow color) to the bottom of the page where the footer start (the footer is the green top-bordered div). This happends because the content is not enought to fill the rest of heigh. This is my css html, body{ height: 100%; margin: 0 auto; } #container{ height: auto !important; height: 100%; margin: 0 auto -50px; /* as #footer height */ min-height: 100%; text-align: center; border: 5px solid blue; } #centered-container{ width: 950px; margin: 0 auto; text-align: left; border: 5px solid yellow; } #body-container{ border: 5px solid red; } #footer, .footer{ height: 50px; } #footer{ text-align: center; border-top: 5px solid green; } And this is my html markup <body> <div id="container">  <div id="centered-container">  <div id="body-container">  </div> </div> <div class="footer"></div>  </div> <div id="footer"></div> </body> Expected behaviour: Additional facts - The colored borders is just for debugging porpuses

Read the article

BeautifulSoup: just get inside of a tag, no matter how many enclosing tags there are

- by AP257

I'm trying to scrape all the inner html from the <p> elements in a web page using BeautifulSoup. There are internal tags, but I don't care, I just want to get the internal text. For example, for: <p>Red</p> <p><i>Blue</i></p> <p>Yellow</p> <p>Light <b>green</b></p> How can I extract: Red Blue Yellow Light green Neither .string nor .contents[0] does what I need. Nor does .extract(), because I don't want to have to specify the internal tags in advance - I want to deal with any that may occur. Is there a 'just get the visible HTML' type of method in BeautifulSoup? ----UPDATE------ On advice, trying: p_tags = page.findAll('p',text=True) for i, p_tag in enumerate(p_tags): print str(p_tag) But that doesn't help - it just prints out: Red <i>Blue</i> Yellow Light <b>green</b>

Read the article

Why aren't these Canvases rendering?

- by bpapa

I'm creating a web app that allows users to enter a number of colors, by specifying RGB values. Upon submission, the user will see a canvas with a solid rectangle drawn in the color chosen. On this page, I have 7 canvases. The first one draws just fine, but none of the rest show up. The browser is Safari. Here's the relevant code: First, the script element in the header, which defines the function I use to draw to the canvas. <script language="JavaScript" TYPE="text/javascript"> </script> Next, the HTML source, where I have my canvas tags and some embedded Javascript to call my drawCanvas function <canvas id="canvas0" width="100" height="100"> </canvas> <script language="JavaScript" TYPE="text/javascript"> </script> . . //more source . <canvas id="canvas1" width="100" height="100"> </canvas> <script language="JavaScript" TYPE="text/javascript"> </script> Also provided is a screenshot. As you can see, the "red" canvas comes up just fine, but the second one, which should be green, doesn't show up at all. Any ideas?

Search Results

Search found 5945 results on 238 pages for 'green threads'.

Page 62/238 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >

- by Rickard von Essen

- by Casey Flynn

- by Tommy

- by TK Kocheran

- by Ian Hannah

- by jinanwow

- by Rich

- by daniel

- by Eli

- by danielkwan

- by coder

- by Jon

- by mclaughlinj

- by morpheous

- by owca

- by Manny

- by Jon

- by Burnsoft Ltd

- by Zoltan Repas

- by morpheous

- by qulzam

- by John Feminella

- by manix

- by AP257

- by bpapa

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >