joel in go - Page 62 - Developer IT

Three Tips to Getting the Most of the Best Joomla Templates

When it comes to the world of online promoting there is nothing more vital that a company will do than setting up their own site. This decision allows any company to show to the online world not only... [Author: Joel Morrison - Web Design and Development - April 10, 2010]

Read the article

Fix Problems Upgrading Office 2010 Beta to RTM (Final) Release

- by Mysticgeek

There are several scenarios where you may run into trouble uninstalling the 2010 Beta and trying to install the RTM (final) release. Today we’ll cover the problems we ran into, and how to fix them. You would think upgrading from the Office 2010 Beta to the final release would be an easy process. Unfortunately, it’s not always that simple. In fact, we ran into three different scenarios where the install wasn’t smooth whatsoever. If you currently have the 2010 Beta installed, you have to remove it before you can install the RTM. Here we’ll take a look at three different troublesome install scenarios we ran into, and how we fixed each one. Important Note: Before proceeding with any of these steps, make sure and backup your Outlook .pst files! Scenario 1 – Uninstall Office 2010 Beta & Fix Install Errors In this first scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. First try to uninstall the Office 2010 Beta by going into Control Panel and selecting Programs and Features. Scroll down to Microsoft Office Professional Plus 2010, right-click it and select Uninstall. Click Yes when the confirmation dialog box comes up. Wait while Office 2010 Beta uninstalls…the amount of time it takes will vary from system to system. To complete the uninstall process, a reboot is required. Fixing Setup Errors The problem is when you start the installation of the 2010 RTM… You get the following setup error even though you uninstalled the 2010 Beta. The problem is there are leftover Office apps or stand alone Office products. So, we need a utility that will clean them up for us. Windows Installer Clean Up Utility Download and install the Clean Up Utility (link Below) following the defaults. After it’s installed you’ll find it in Start \ All Programs \ Windows Install Clean Up …go ahead and launch the utility. Now go through and remove all Office Programs or addins that you find in the list. Make sure you are just deleting Office apps and not something you need like Java for example. If you’re not sure what something is, doing a quick Google search should help you out. For instance we had the Office labs Ribbon Hero installed… just highlight and click Remove. Remove anything that has something to do with Office…then reboot your machine. Now, you should be able to begin the installation of Office 2010 RTM (Final) Release without any errors. If you do get an error during the install process, like this one telling us we have old version of Groove Server… Navigate to C:\Users\username\AppData\Local\Microsoft (where username is the computer name) and delete any existing MS Office folders. Then try the install again, this solved the problem in our first scenario. Scenario 2 – Not Being Able to Uninstall 2010 Beta from Programs and Features In this next scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. Another problem we ran into is not being able to uninstall the 2010 Beta from Programs and Features. When you go in to uninstall it, nothing happens. If you run into this problem, we again need to download and install the Windows Installer Clean Up Utility (link below) and manually uninstall the Beta. When you launch it, scroll down to Microsoft Office Professional Plus 2010 (Beta), highlight it and click Remove. Click OK to the Warning Dialog box… If you see any other Office 2010, 2007, or 2003 entries you can hold the “Shift” key and highlight them all…then click Remove and click OK to the warning dialog. Now we need to delete some Registry settings. Click on Start and type regedit into the Search box and hit Enter. Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. Now go into C:\Program Files and find any of these three folders…Microsoft Office, OfficeUpdate, or OfficeUpdate14…you might find one, two or all three. Either way just rename the folders with “_OLD” (without quotes) at the end. Then go into C:\Users\username\AppData\Local\Microsoft and delete any existing MS Office folders. Where in this example we have office, Office Labs, One Note…etc. Now we want to delete the contents of the Temp folder. Click on Start and type %temp% into the Search box and hit Enter. Use the key combination “Ctrl+A” to select all the files in this folder, then right-click and click Delete, or simply hit the Delete key. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. When you get back from the restart launch the Office 2010 RTM installer and you should be good to go with installation. Because we uninstalled the Office 2010 Beta manually, you may have some lingering blank icons that you’ll need to clean up. Scenario –3 Uninstall 2007 and Install 2010 32-Bit on x64 Windows 7 For this final scenario we are uninstalling Office Professional 2007 and installing Office Professional Plus 2010 32-Bit edition on a Windows Ultimate 64-bit computer. This machine actually had Office 2010 Beta 64-bit installed at one point also, it’s since been removed, and 2007 was reinstalled. Go into Programs and Settings and uninstall Microsoft Office Professional 2007. Click Yes to the dialog box asking if you’re sure you want to uninstall it… Then wait while Office 2007 is uninstalled. The amount of time it takes will vary between systems. A restart is required to complete the process… Again we need to call upon the Windows Installer Clean Up Utility. Go through and delete any left over Office 2007 and 2010 entries. Click OK to the warning dialog that comes up. After that’s complete, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. We still need to go into C:\Users\ username\AppData\ Local\ Microsoft (where username is the computer name) and delete any Office folders. In this example we have Outlook Connector, Office, and Outlook to delete. Now let’s delete the contents of the Temp folder by typing %temp% into the Search box in the Start Menu. Then delete all of the files and folders in the Temp directory. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. If you try to install the 2010 RTM at this point you might be able to begin the install, but may get the following Error 1402 message. To solve this issue, we opened the command prompt and ran the following: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose After the command completes, kick off the Office 2010 (Final) RTM 32-bit edition. This solved the issue and Office 2010 installed successfully. Conclusion Except for the final scenario, we found using the Windows Installer Clean Up Utility to come in very handy. Using that along with deleting a couple folders and registry settings did the trick. In the last one, we had to get a bit more geeky and use some command line magic, but it got the job done. After some extensive testing in our labs, the only time the upgrade to the RTM went smoothly was when we had a clean Vista or Windows 7 system with a fresh install of the 2010 beta only. However, chances are you went from 2003 or 2007 to the free 2010 Beta. You might also have addins or other Office products installed, so there are going to be a lot of different office files scattered throughout your PC. If that’s the case, you may run into the issues we covered here. These are a few scenarios where we got errors and were not able to install Office 2010 after removing the beta. There could be other problems, and if any of you have experienced different issues or have more good suggestions, leave a comment and let us know! Link Download Windows Installer Clean Up Utility Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007How to Upgrade the Windows 7 RC to RTM (Final Release)Upgrading Ubuntu from Dapper to Edgy with Update ManagerDisable Office 2010 Beta Send-a-Smile from StartupAdd or Remove Apps from the Microsoft Office 2007 or 2010 Suite TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

Read the article

Quotas - Using quotas on ZFSSA shares and projects and users

- by Steve Tunstall

So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool. Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share. Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full. That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB. So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person. Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that. Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works. Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did. Go back to any share or project. You will see that you now have four new, custom properties on the bottom. Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user. After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set. Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I? That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end. After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur. For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them. I hope these tips have helped you out there. Quotas can be fun.

Read the article

Operator of the week - Assert

- by Fabiano Amorim

Well my friends, I was wondering how to help you in a practical way to understand execution plans. So I think I'll talk about the Showplan Operators. Showplan Operators are used by the Query Optimizer (QO) to build the query plan in order to perform a specified operation. A query plan will consist of many physical operators. The Query Optimizer uses a simple language that represents each physical operation by an operator, and each operator is represented in the graphical execution plan by an icon. I'll try to talk about one operator every week, but so as to avoid having to continue to write about these operators for years, I'll mention only of those that are more common: The first being the Assert. The Assert is used to verify a certain condition, it validates a Constraint on every row to ensure that the condition was met. If, for example, our DDL includes a check constraint which specifies only two valid values for a column, the Assert will, for every row, validate the value passed to the column to ensure that input is consistent with the check constraint. Assert and Check Constraints: Let's see where the SQL Server uses that information in practice. Take the following T-SQL: IF OBJECT_ID('Tab1') IS NOT NULL DROP TABLE Tab1 GO CREATE TABLE Tab1(ID Integer, Gender CHAR(1)) GO ALTER TABLE TAB1 ADD CONSTRAINT ck_Gender_M_F CHECK(Gender IN('M','F')) GO INSERT INTO Tab1(ID, Gender) VALUES(1,'X') GO To the command above the SQL Server has generated the following execution plan: As we can see, the execution plan uses the Assert operator to check that the inserted value doesn't violate the Check Constraint. In this specific case, the Assert applies the rule, 'if the value is different to "F" and different to "M" than return 0 otherwise returns NULL'. The Assert operator is programmed to show an error if the returned value is not NULL; in other words, the returned value is not a "M" or "F". Assert checking Foreign Keys Now let's take a look at an example where the Assert is used to validate a foreign key constraint. Suppose we have this query: ALTER TABLE Tab1 ADD ID_Genders INT GO IF OBJECT_ID('Tab2') IS NOT NULL DROP TABLE Tab2 GO CREATE TABLE Tab2(ID Integer PRIMARY KEY, Gender CHAR(1)) GO INSERT INTO Tab2(ID, Gender) VALUES(1, 'F') INSERT INTO Tab2(ID, Gender) VALUES(2, 'M') INSERT INTO Tab2(ID, Gender) VALUES(3, 'N') GO ALTER TABLE Tab1 ADD CONSTRAINT fk_Tab2 FOREIGN KEY (ID_Genders) REFERENCES Tab2(ID) GO INSERT INTO Tab1(ID, ID_Genders, Gender) VALUES(1, 4, 'X') Let's look at the text execution plan to see what these Assert operators were doing. To see the text execution plan just execute SET SHOWPLAN_TEXT ON before run the insert command. |--Assert(WHERE:(CASE WHEN NOT [Pass1008] AND [Expr1007] IS NULL THEN (0) ELSE NULL END)) |--Nested Loops(Left Semi Join, PASSTHRU:([Tab1].[ID_Genders] IS NULL), OUTER REFERENCES:([Tab1].[ID_Genders]), DEFINE:([Expr1007] = [PROBE VALUE])) |--Assert(WHERE:(CASE WHEN [Tab1].[Gender]<>'F' AND [Tab1].[Gender]<>'M' THEN (0) ELSE NULL END)) | |--Clustered Index Insert(OBJECT:([Tab1].[PK]), SET:([Tab1].[ID] = RaiseIfNullInsert([@1]),[Tab1].[ID_Genders] = [@2],[Tab1].[Gender] = [Expr1003]), DEFINE:([Expr1003]=CONVERT_IMPLICIT(char(1),[@3],0))) |--Clustered Index Seek(OBJECT:([Tab2].[PK]), SEEK:([Tab2].[ID]=[Tab1].[ID_Genders]) ORDERED FORWARD) Here we can see the Assert operator twice, first (looking down to up in the text plan and the right to left in the graphical plan) validating the Check Constraint. The same concept showed above is used, if the exit value is "0" than keep running the query, but if NULL is returned shows an exception. The second Assert is validating the result of the Tab1 and Tab2 join. It is interesting to see the "[Expr1007] IS NULL". To understand that you need to know what this Expr1007 is, look at the Probe Value (green text) in the text plan and you will see that it is the result of the join. If the value passed to the INSERT at the column ID_Gender exists in the table Tab2, then that probe will return the join value; otherwise it will return NULL. So the Assert is checking the value of the search at the Tab2; if the value that is passed to the INSERT is not found then Assert will show one exception. If the value passed to the column ID_Genders is NULL than the SQL can't show a exception, in that case it returns "0" and keeps running the query. If you run the INSERT above, the SQL will show an exception because of the "X" value, but if you change the "X" to "F" and run again, it will show an exception because of the value "4". If you change the value "4" to NULL, 1, 2 or 3 the insert will be executed without any error. Assert checking a SubQuery: The Assert operator is also used to check one subquery. As we know, one scalar subquery can't validly return more than one value: Sometimes, however, a mistake happens, and a subquery attempts to return more than one value . Here the Assert comes into play by validating the condition that a scalar subquery returns just one value. Take the following query: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F') INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F') |--Assert(WHERE:(CASE WHEN NOT [Pass1016] AND [Expr1015] IS NULL THEN (0) ELSE NULL END)) |--Nested Loops(Left Semi Join, PASSTHRU:([tempdb].[dbo].[Tab1].[ID_TipoSexo] IS NULL), OUTER REFERENCES:([tempdb].[dbo].[Tab1].[ID_TipoSexo]), DEFINE:([Expr1015] = [PROBE VALUE])) |--Assert(WHERE:([Expr1017])) | |--Compute Scalar(DEFINE:([Expr1017]=CASE WHEN [tempdb].[dbo].[Tab1].[Sexo]<>'F' AND [tempdb].[dbo].[Tab1].[Sexo]<>'M' THEN (0) ELSE NULL END)) | |--Clustered Index Insert(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8]), SET:([tempdb].[dbo].[Tab1].[ID_TipoSexo] = [Expr1008],[tempdb].[dbo].[Tab1].[Sexo] = [Expr1009],[tempdb].[dbo].[Tab1].[ID] = [Expr1003])) | |--Top(TOP EXPRESSION:((1))) | |--Compute Scalar(DEFINE:([Expr1008]=[Expr1014], [Expr1009]='F')) | |--Nested Loops(Left Outer Join) | |--Compute Scalar(DEFINE:([Expr1003]=getidentity((1856985942),(2),NULL))) | | |--Constant Scan | |--Assert(WHERE:(CASE WHEN [Expr1013]>(1) THEN (0) ELSE NULL END)) | |--Stream Aggregate(DEFINE:([Expr1013]=Count(*), [Expr1014]=ANY([tempdb].[dbo].[Tab1].[ID_TipoSexo]))) | |--Clustered Index Scan(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8])) |--Clustered Index Seek(OBJECT:([tempdb].[dbo].[Tab2].[PK__Tab2__3214EC27755C58E5]), SEEK:([tempdb].[dbo].[Tab2].[ID]=[tempdb].[dbo].[Tab1].[ID_TipoSexo]) ORDERED FORWARD) You can see from this text showplan that SQL Server as generated a Stream Aggregate to count how many rows the SubQuery will return, This value is then passed to the Assert which then does its job by checking its validity. Is very interesting to see that the Query Optimizer is smart enough be able to avoid using assert operators when they are not necessary. For instance: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1 WHERE ID = 1), 'F') INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT TOP 1 ID_TipoSexo FROM Tab1), 'F') For both these INSERTs, the Query Optimiser is smart enough to know that only one row will ever be returned, so there is no need to use the Assert. Well, that's all folks, I see you next week with more "Operators". Cheers, Fabiano

Read the article

Bulk inserting best way to about it? + Helping me understand fully what I found so far

- by chobo2

Hi So I saw this post here and read it and it seems like bulk copy might be the way to go. http://stackoverflow.com/questions/682015/whats-the-best-way-to-bulk-database-inserts-from-c I still have some questions and want to know how things actually work. So I found 2 tutorials. http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx First way uses 2 ado.net 2.0 features. BulkInsert and BulkCopy. the second one uses linq to sql and OpenXML. This sort of appeals to me as I am using linq to sql already and prefer it over ado.net. However as one person pointed out in the posts what he just going around the issue at the cost of performance( nothing wrong with that in my opinion) First I will talk about the 2 ways in the first tutorial I am using VS2010 Express, .net 4.0, MVC 2.0, SQl Server 2005 Is ado.net 2.0 the most current version? Based on the technology I am using, is there some updates to what I am going to show that would improve it somehow? Is there any thing that these tutorial left out that I should know about? BulkInsert I am using this table for all the examples. CREATE TABLE [dbo].[TBL_TEST_TEST] ( ID INT IDENTITY(1,1) PRIMARY KEY, [NAME] [varchar](50) ) SP Code USE [Test] GO /****** Object: StoredProcedure [dbo].[sp_BatchInsert] Script Date: 05/19/2010 15:12:47 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[sp_BatchInsert] (@Name VARCHAR(50) ) AS BEGIN INSERT INTO TBL_TEST_TEST VALUES (@Name); END C# Code /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 1000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } So first thing is the batch size. Why would you set a batch size to anything but the number of records you are sending? Like I am sending 500,000 records so I did a Batch size of 500,000. Next why does it crash when I do this? If I set it to 1000 for batch size it works just fine. System.Data.SqlClient.SqlException was unhandled Message="A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=20 LineNumber=0 Number=233 Server="" State=0 StackTrace: at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataTable dataTable) at TestIQueryable.Program.BatchInsert() in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 124 at TestIQueryable.Program.Main(String[] args) in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 16 InnerException: Time it took to insert 500,000 records with insert batch size of 1000 took "2 mins and 54 seconds" Of course this is no official time I sat there with a stop watch( I am sure there are better ways but was too lazy to look what they where) So I find that kinda slow compared to all my other ones(expect the linq to sql insert one) and I am not really sure why. Next I looked at bulkcopy /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } This one seemed to go really fast and did not even need a SP( can you use SP with bulk copy? If you can would it be better?) BatchCopy had no problem with a 500,000 batch size.So again why make it smaller then the number of records you want to send? I found that with BatchCopy and 500,000 batch size it took only 5 seconds to complete. I then tried with a batch size of 1,000 and it only took 8 seconds. So much faster then the bulkinsert one above. Now I tried the other tutorial. USE [Test] GO /****** Object: StoredProcedure [dbo].[spTEST_InsertXMLTEST_TEST] Script Date: 05/19/2010 15:39:03 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[spTEST_InsertXMLTEST_TEST](@UpdatedProdData nText) AS DECLARE @hDoc int exec sp_xml_preparedocument @hDoc OUTPUT,@UpdatedProdData INSERT INTO TBL_TEST_TEST(NAME) SELECT XMLProdTable.NAME FROM OPENXML(@hDoc, 'ArrayOfTBL_TEST_TEST/TBL_TEST_TEST', 2) WITH ( ID Int, NAME varchar(100) ) XMLProdTable EXEC sp_xml_removedocument @hDoc C# code. /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } So I like this because I get to use objects even though it is kinda redundant. I don't get how the SP works. Like I don't get the whole thing. I don't know if OPENXML has some batch insert under the hood but I do not even know how to take this example SP and change it to fit my tables since like I said I don't know what is going on. I also don't know what would happen if the object you have more tables in it. Like say I have a ProductName table what has a relationship to a Product table or something like that. In linq to sql you could get the product name object and make changes to the Product table in that same object. So I am not sure how to take that into account. I am not sure if I would have to do separate inserts or what. The time was pretty good for 500,000 records it took 52 seconds The last way of course was just using linq to do it all and it was pretty bad. /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } I did only 50,000 records and that took over a minute to do. So I really narrowed it done to the linq to sql bulk insert way or bulk copy. I am just not sure how to do it when you have relationship for either way. I am not sure how they both stand up when doing updates instead of inserts as I have not gotten around to try it yet. I don't think I will ever need to insert/update more than 50,000 records at one type but at the same time I know I will have to do validation on records before inserting so that will slow it down and that sort of makes linq to sql nicer as your got objects especially if your first parsing data from a xml file before you insert into the database. Full C# code using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Serialization; using System.Data; using System.Data.SqlClient; namespace TestIQueryable { class Program { private static string connectionString = ""; static void Main(string[] args) { BatchInsert(); Console.WriteLine("done"); } /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 500000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } private static DataTable GetDataTable() { // You First need a DataTable and have all the insert values in it DataTable dtInsertRows = new DataTable(); dtInsertRows.Columns.Add("NAME"); for (int i = 0; i < 500000; i++) { DataRow drInsertRow = dtInsertRows.NewRow(); string name = "Name : " + i; drInsertRow["NAME"] = name; dtInsertRows.Rows.Add(drInsertRow); } return dtInsertRows; } static void sbc_SqlRowsCopied(object sender, SqlRowsCopiedEventArgs e) { Console.WriteLine("Number of records affected : " + e.RowsCopied.ToString()); } } }

Read the article

SharePoint – The Most Important Feature

- by Bil Simser

Watching twitter and doing a search for SharePoint and you see a lot (almost one every few minutes) of tweets about the top 10 new features in SharePoint. What answer do you get when you ask the question, “What’s the most important feature in SharePoint?”. Chances are the answer will vary. Some will say it’s the collaboration aspect, others might say it’s the new ribbon interface, multi-item editing, external content types, faceted search, large list support, document versioning, Silverlight, etc. The list goes on. However I think most people might be missing the most important feature that’s sitting right under their noses all this time. The most important feature of SharePoint? It’s called User Empowerment. Huh? What? Is that something I find in the Site Actions menu? Nope. It’s something that’s always been there in SharePoint, you just need to get the word out and support it. How many times have you had a team ask you for a team site (assuming you had SharePoint up and running). Or to create them a contact list. Or how long have you employed that guy in the corner who’s been copying and pasting content from Corporate Communications into the web from a Word document. Let’s stop the insanity. It doesn’t have to be this way. SharePoint’s strongest feature isn’t anything you can find in the Site Settings screen or Central Admin. It’s all about empowering your users and letting them take control of their content. After all, SharePoint really is a bunch of tools to allow users to collaborate on content isn’t it? So why are you stepping in as IT and helping the user every moment along the way. It’s like having to ask users to fill out a help desk ticket or call up the Windows team to create a folder on their desktop or rearrange their Start menu. This isn’t something IT should be spending their time doing nor is it something the users should be burdened with having to wait until their friendly neighborhood tech-guy (or gal) shows up to help them sort the icons on their desktop. SharePoint IS all about empowerment. Site owners can create whatever lists and libraries they need for their team, and if the template isn’t there they can always turn to my friend and yours, the Custom List. From that can spew forth approval tracking systems, new hire checklists, and server inventory. You’re only limited by your imagination and needs. Users should be able to create new sites as they need. Want a blog to let everyone know what your team is up to? Go create one, here’s how. What’s a blog you ask? Here’s what it is and why you would use one. SharePoint is the shift in the balance of power and you need, and an IT group, let go of certain responsibilities and let your users run with the tools. A power user who knows how to create sites and what features are available to them can help a team go from the forming stage to the storming stage overnight. Again, this all hinges on you as an IT organization and what you can and empower your users with as far as features go. Running with tools is great if you know how to use them, running with scissors not recommended unless you enjoy trips to the hospital. With Great Power comes Great Responsibility so don’t go out on Monday and send out a memo to the organization saying “This Bil guy says you peeps can do anything so here it is, knock yourself out” (for one, they’ll have *no* idea who this Bil guy is). This advice comes with the task of getting your users ready for empowerment. Whether it’s through some kind of internal training sessions, in-house documentation; videos; blog posts; on how to accomplish things in SharePoint, or full blown one-on-one sit downs with teams or individuals to help them through their problems. The work is up to you. Helping them along also should be part of your governance (you do have one don’t you?). Just because you have InfoPath client deployed with your Office suite, doesn’t mean users should just start publishing forms all over your SharePoint farm. There should be some governance behind that in what you’ll support and what is possible. The other caveat to all this is that SharePoint is not everything for everyone. It can’t cook you breakfast and impregnate your cat or solve world hunger. It also isn’t suited for every IT solution out there. It’s a horrible source control system (even though some people try to use it as such) and really can’t do financials worth a darn. Again, governance is key here and part of that governance and your responsibility in setting up and unleashing SharePoint into your organization is to provide users guidance on what should be in SharePoint and (more importantly) what should not be in SharePoint. There are boundaries you have to set where you don’t want your end users going as they might be treading into trouble. Again, this is up to you to set these constraints and help users understand why these pylons are there. If someone understands why they can’t do something they might have a better understanding and respect for those that put them there in the first place. Of course you’ll always have the power-users who want to go skiing down dead mans curve so this doesn’t work for everyone, but you can catch the majority of the newbs who don’t wander aimlessly off the beaten path. At the end of the day when all things are going swimmingly your end users should be empowered to solve the needs they have on a day to day basis and not having to keep bugging the IT department to help them create a view to show only approved documents. I wouldn’t go as far as business users building out full blown solutions and handing the keys to SharePoint Designer or (worse) Visual Studio to power-users might not be a path you want to go down but you also don’t have to lock up the SharePoint system in a tight box where users can’t use what’s there. So stop focusing on the shiny things in SharePoint and maybe consider making a shift to what’s really important. Making your day job easier and letting users get the most our of your technology investment.

Read the article

Microsoft Sql Server driver for Nodejs - Part 2

- by chanderdhall

Nodejs, Sql server and Json response with Rest This post is part 2 of Microsoft Sql Server driver for Node js.In this post we will look at the JSON responses from the Microsoft Sql Server driver for Node js. Pre-requisites: If you have read the Part 1 of the series, you should be good. We will be using a framework for Rest within Nodejs - Restify, but that would need no prior learning. Restify: Restify is a simple node module for building RESTful services. It is slimmer than Express. Express is a complete module that has all what you need to create a full-blown browser app. However, Restify does not have additional overhead of templating, rendering etc that would be needed if your app has views. So, as the name suggests it's an awesome framework for building RESTful services and is very light-weight. Set up - You can continue with the same directory or project structure we had in the previous post, or can start a new one. Install restify using npm and you are good to go. npm install restify Go to Server.js and include Restify in your solution. Then create the server object using restify.CreateServer() - SLICK - ha? var restify = require('restify'); var server = restify.createServer(); server.listen(8080, function () { console.log('%s listening at %s', server.name, server.url); }); Then make sure you provide a port for the Server to listen at. The call back function is optional but helps you for debugging purposes. Once you are done, save the file and then go to the command prompt and hit 'node server.js' and you should see the following: To test the server, go to your browser and type the address 'http://localhost:8080/' and oops you will see an error. Why is that? - Well because we haven't defined any routes. Let's go ahead and create a route. To begin with I'd like to return whatever is typed in the url after my name and the following code should do it. server.get('/ChanderDhall/:status', function respond(req, res, next) { res.end("hello " + req.params.name + "") }); You can also avoid writing call backs inline. Something like this. function respond(req, res, next) { res.end("Chander Dhall " + req.params.name + ""); } server.get('/hello/:name', respond); Now if you go ahead and type http://localhost:8080/ChanderDhall/LovesNode you will get the response 'Chander Dhall loves node'. NOTE: Make sure your url has the right case as it's case-sensitive. You could have also typed it in as 'server.get('/chanderdhall/:name', respond);' Stored procedure: We've talked a lot about Restify now, but keep in mind the post is about being able to use Sql server with Node and return JSON. To see this in action, let's go ahead and create another route to a list of Employees from a stored procedure. server.get('/Employees', Employees); The following code will return a JSON response. function Employees(req, res, next) { res.header("Content-Type: application/json"); //Need to specify the Content-Type which is //JSON in our case. sql.open(conn_str, function (err, conn) { if (err) { //Logs an error console.log("Error opening the database connection!"); return; } console.log("before query!"); conn.queryRaw("exec sp_GetEmployees", function (err, results) { if (err) { //Connection is open but an error occurs whileWhat else can be done? May be create a formatter or may be even come up with a hypermedia type but that may upset some pragmatists. Well, that's going to be a totally different discussion and is really not part of this series. Summary: We've discussed how to execute a stored procedure using Microsoft Sql Server driver for Node. Also, we have discussed how to format and send out a clean JSON to the app calling this API.

Read the article

Advanced Java book in the lines of CLR via c# or C# in Depth?

- by devoured elysium

I want to learn about how things work in depth in Java. Coming from a c# background, there were a couple of very good books that go really deep in c# (C# in depth, CLR via c#, just to name the most popular). Is there anything like that in Java? I searched it up on amazon but nothing seemed to go that deep in Java as the two above go in c#. I don't want to know more about specific classes, or how to use this library or that other library, I want to learn how the objects are created on memory, how they get created on the stack, heap, etc. A more fundamental knowledge, let's say. I've read some chapters of Effective Java and The Java Programming Language but they don't seem to go so deep as I'd want them to go. Maybe there are other people that know both c# and Java that have read any of the referred books and know any that might be useful? Thanks

Read the article

Breaking through the class sealing

- by Jason Crease

Do you understand 'sealing' in C#? Somewhat? Anyway, here's the lowdown. I've done this article from a C# perspective, but I've occasionally referenced .NET when appropriate. What is sealing a class? By sealing a class in C#, you ensure that you ensure that no class can be derived from that class. You do this by simply adding the word 'sealed' to a class definition: public sealed class Dog {} Now writing something like " public sealed class Hamster: Dog {} " you'll get a compile error like this: 'Hamster: cannot derive from sealed type 'Dog' If you look in an IL disassembler, you'll see a definition like this: .class public auto ansi sealed beforefieldinit Dog extends [mscorlib]System.Object Note the addition of the word 'sealed'. What about sealing methods? You can also seal overriding methods. By adding the word 'sealed', you ensure that the method cannot be overridden in a derived class. Consider the following code: public class Dog : Mammal { public sealed override void Go() { } } public class Mammal { public virtual void Go() { } } In this code, the method 'Go' in Dog is sealed. It cannot be overridden in a subclass. Writing this would cause a compile error: public class Dachshund : Dog { public override void Go() { } } However, we can 'new' a method with the same name. This is essentially a new method; distinct from the 'Go' in the subclass: public class Terrier : Dog { public new void Go() { } } Sealing properties? You can also seal seal properties. You add 'sealed' to the property definition, like so: public sealed override string Name { get { return m_Name; } set { m_Name = value; } } In C#, you can only seal a property, not the underlying setters/getters. This is because C# offers no override syntax for setters or getters. However, in underlying IL you seal the setter and getter methods individually - a property is just metadata. Why bother sealing? There are a few traditional reasons to seal: Invariance. Other people may want to derive from your class, even though your implementation may make successful derivation near-impossible. There may be twisted, hacky logic that could never be second-guessed by another developer. By sealing your class, you're protecting them from wasting their time. The CLR team has sealed most of the framework classes, and I assume they did this for this reason. Security. By deriving from your type, an attacker may gain access to functionality that enables him to hack your system. I consider this a very weak security precaution. Speed. If a class is sealed, then .NET doesn't need to consult the virtual-function-call table to find the actual type, since it knows that no derived type can exist. Therefore, it could emit a 'call' instead of 'callvirt' or at least optimise the machine code, thus producing a performance benefit. But I've done trials, and have been unable to demonstrate this If you have an example, please share! All in all, I'm not convinced that sealing is interesting or important. Anyway, moving-on... What is automatically sealed? Value types and structs. If they were not always sealed, all sorts of things would go wrong. For instance, structs are laid-out inline within a class. But what if you assigned a substruct to a struct field of that class? There may be too many fields to fit. Static classes. Static classes exist in C# but not .NET. The C# compiler compiles a static class into an 'abstract sealed' class. So static classes are already sealed in C#. Enumerations. The CLR does not track the types of enumerations - it treats them as simple value types. Hence, polymorphism would not work. What cannot be sealed? Interfaces. Interfaces exist to be implemented, so sealing to prevent implementation is dumb. But what if you could prevent interfaces from being extended (i.e. ban declarations like "public interface IMyInterface : ISealedInterface")? There is no good reason to seal an interface like this. Sealing finalizes behaviour, but interfaces have no intrinsic behaviour to finalize Abstract classes. In IL you can create an abstract sealed class. But C# syntax for this already exists - declaring a class as a 'static', so it forces you to declare it as such. Non-override methods. If a method isn't declared as override it cannot be overridden, so sealing would make no difference. Note this is stated from a C# perspective - the words are opposite in IL. In IL, you have four choices in total: no declaration (which actually seals the method), 'virtual' (called 'override' in C#), 'sealed virtual' ('sealed override' in C#) and 'newslot virtual' ('new virtual' or 'virtual' in C#, depending on whether the method already exists in a base class). Methods that implement interface methods. Methods that implement an interface method must be virtual, so cannot be sealed. Fields. A field cannot be overridden, only hidden (using the 'new' keyword in C#), so sealing would make no sense.

Read the article

SQL Select Permissions

- by Brandi

I have a database that I need to connect to and select from. I have an SQL Login, let's call it myusername. When I use the following, no SELECT permission shows up: SELECT * FROM fn_my_permissions ('dbo.mytable', 'OBJECT') GO Several times I tried things like: USE mydatabase GO GRANT SELECT TO myusername GO GRANT SELECT ON DATABASE::mydatabase TO myusername GO GRANT SELECT ON mytable TO myusername GO It says the queries execute successfully, but there is never any difference in the first query. What simple thing am I missing to grant database level select permissions. As a note, I made double sure it was the correct user, correct database, and I have already tried granting table level select permissions. So far I keep getting the error: SELECT permission denied on object 'mytable', database 'mydatabase', schema 'dbo'. Any ideas what I'm missing? Thanks in advance.

Read the article

php cpanel

- by Miguel Ping

I have a php account with my provider, and I also have cpanel installed for me. I currently have two drupal sites there, let's called the main myMainSite and another one under construction called myNewSite. So when I go to www.myMainSite.com, I go to the main site. When I go to myNewSite.myMainSite.com, i go to the drupal site that is under construction. My question is, when my under construction site goes live, I want that all users that go to www.myMainSite.com see the new site (the one that is under myNewSite.myMainSite.com). How can I accomplish this with cpanel? is it within the "addon domains" configuration? I don't want a redirect that changes the address bar, ie, I want to keep the original url.

Read the article

Navigate Quickly with JustCode and Ctrl+Click

Ctrl + Click is a widely used shortcut for Go To Definition in many development environments but not in Visual Studio. We, the JustCode team, find it really useful so we added it to Visual Studio. But we didn't stop there - we improved it even further. Read on to find the details. With JustCode you get an enhanced Go To Definition. By default you can execute it in the Visual Studio editor using one of the following shortcuts: Middle Click, Ctrl+Left Click, F12, Ctrl+Enter, Ctrl+B. The first usage of this feature is not much different from the default Visual Studio Go To Definition command use it where a member, type, method, property, etc is used to navigate to the definition of that item. For example, if you have this method: public void Start() { lion = new Lion(); lion.Roar(); } If you hold Ctrl and click on the usage of the lion you will go to the lion member definition. If you hold Ctrl and click on the Lion you will go to the Lion class definition. What we added is the ability to easily find all the usages of the item you just navigated to. For example: public class Lion { public void Roar() { Console.WriteLine("Rhaaaar"); } } If you hold Ctrl and click on the Lion definition you will see all the usages of the Lion type; if you click on the Roar method definition you will see all the usages of the Roar method: And if there is only one usage you will get automatically to that usage. In the examples I use C#, but it works also in VB.NET, JavaScript, ASP.NET and XAML. Why we like this feature? Let me first start with how the Ctrl+Click (or Go To Definition command) is used. We noticed that developers use it especially in what we call "code browsing sessions". In simple words this is when you browse around the code looking for a bug, just reading the code or searching for something. Sounds familiar? In our experience when you go to the definition of some item you often want to know more about it and the first thing you need is to find its usages. With JustCode this is just one click away. Why Ctrl+Click/Middle Click over F12/Ctrl+Enter/Ctrl+B? Actually you can use all of them. But during these "code browsing sessions" we noticed that most developers use the mouse. So the mouse is already in use and pressing Ctrl+Click (or the Middle Click) is so natural. During heavy coding sessions or if you are a keyboard type developer F12 (or any of the other keyboard shortcuts) is the key. We really use heavily this feature not only in our team but in the whole company. It saves us a bit of time many times a day. And it adds up. We hope you will like it too. Your feedback is more than welcome for us. P.S. If you dont want JustCode to capture the Ctrl+Click and the Middle Click in the editor, you can change that in JustCode->Options->General in the Navigation group. Keyboard shortcuts can be reassigned using the Visual Studio keyboard shortcuts editor.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Error creating a table : "There is already an object named ... in the database", but not object with

- by DavRob60

Hi, I'm trying to create a table on a Microsoft SQL Server 2005 (Express). When i run this query USE [QSWeb] GO /****** Object: Table [dbo].[QSW_RFQ_Log] Script Date: 03/26/2010 08:30:29 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[QSW_RFQ_Log]( [RFQ_ID] [int] NOT NULL, [Action_Time] [datetime] NOT NULL, [Quote_ID] [int] NULL, [UserName] [nvarchar](256) NOT NULL, [Action] [int] NOT NULL, [Parameter] [int] NULL, [Note] [varchar](255) NULL, CONSTRAINT [QSW_RFQ_Log] PRIMARY KEY CLUSTERED ( [RFQ_ID] ASC, [Action_Time] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO I got this error message Msg 2714, Level 16, State 4, Line 2 There is already an object named 'QSW_RFQ_Log' in the database. Msg 1750, Level 16, State 0, Line 2 Could not create constraint. See previous errors. but if i try to find the object in question using this query: SELECT * FROM QSWEB.sys.all_objects WHERE upper(name) like upper('QSW_RFQ_%') I got this (0 row(s) affected) What is going on????

Read the article

Error: Too Many Arguments Specified when Inserting Values from ASP.NET to SQL Server

- by SidC

Good Afternoon All, I have a wizard control that contains 20 textboxes for part numbers and another 20 for quantities. I want the part numbers and quantities loaded into the following table: USE [Diel_inventory] GO /****** Object: Table [dbo].[QUOTEDETAILPARTS] Script Date: 05/09/2010 16:26:54 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[QUOTEDETAILPARTS]( [QuoteDetailPartID] [int] IDENTITY(1,1) NOT NULL, [QuoteDetailID] [int] NOT NULL, [PartNumber] [float] NULL, [Quantity] [int] NULL, CONSTRAINT [pkQuoteDetailPartID] PRIMARY KEY CLUSTERED ( [QuoteDetailPartID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[QUOTEDETAILPARTS] WITH CHECK ADD CONSTRAINT [fkQuoteDetailID] FOREIGN KEY([QuoteDetailID]) REFERENCES [dbo].[QUOTEDETAIL] ([ID]) ON UPDATE CASCADE ON DELETE CASCADE GO Here's the snippet from my sproc for this insert: set @ID=scope_identity() Insert into dbo.QuoteDetailParts (QuoteDetailPartID, QuoteDetailID, PartNumber, Quantity) values (@ID, @QuoteDetailPartID, @PartNumber, @Quantity) When I run the ASPX page, I receive an error that there are too many arguments specified for my stored procedure. I understand why I'm getting the error, given the above table layout. However, I need help in structuring my insert syntax to look for values in all 20 PartNumber and Quantity field pairs. Thanks, Sid

Read the article

Linq to SQl Stored Procedure Problem( it can't figure out the return type)

- by chobo2

Hi I have this SP USE [Test] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE PROCEDURE [dbo].[UsersInsert](@UpdatedProdData XML) AS INSERT INTO dbo.UserTable(UserId,UserName,LicenseId,Password,PasswordSalt,Email,IsApproved,IsLockedOut,CreateDate, LastLoginDate,LastLockOutDate,FailedPasswordAttempts,RoleId) SELECT @UpdatedProdData.value('(/ArrayOfUsers/Users/UserId)[1]', 'uniqueidentifier'), @UpdatedProdData.value('(/ArrayOfUsers/Users/UserName)[1]', 'varchar(20)'), @UpdatedProdData.value('(/ArrayOfUsers/Users/LicenseId)[1]', 'varchar(50)'), @UpdatedProdData.value('(/ArrayOfUsers/Users/Password)[1]', 'varchar(128)'), @UpdatedProdData.value('(/ArrayOfUsers/Users/PasswordSalt)[1]', 'varchar(128)'), @UpdatedProdData.value('(/ArrayOfUsers/Users/Email)[1]', 'varchar(50)'), @UpdatedProdData.value('(/ArrayOfUsers/Users/IsApproved)[1]', 'bit'), @UpdatedProdData.value('(/ArrayOfUsers/Users/IsLockedOut)[1]', 'bit'), @UpdatedProdData.value('(/ArrayOfUsers/Users/CreateDate)[1]', 'datetime'), @UpdatedProdData.value('(/ArrayOfUsers/Users/LastLoginDate)[1]', 'datetime'), @UpdatedProdData.value('(/ArrayOfUsers/Users/LastLockOutDate)[1]', 'datetime'), @UpdatedProdData.value('(/ArrayOfUsers/Users/FailedPasswordAttempts)[1]', 'int'), @UpdatedProdData.value('(/ArrayOfUsers/Users/RoleId)[1]', 'int') Now this SP creates just fine. It's when I go to VS2010 and try to drag this SP in my method panel of my linq to sql file in design view. It tells me that it can't figure out the return type. I try to go to the properties but it does not have "none" as a choice and I can't type it in. It should be "none" so how do I set it to "none"?

Read the article

SQL query problem

- by Brisonela

Hi, I'm new to StackOverflow, and new to SQL Server, I'd like you to help me with some troublesome query. This is my database structure(It's half spanish, hope doesn't matter) Database My problem is that I don't now how to make a query that states which team is local and which is visitor(using table TMatch, knowing that the stadium belongs to only one team) This is as far as I can get Select P.NroMatch, (select * from fnTeam (P.TeamA)) as TeamA,(select * from fnTeam (P.TeamB)) as TeamB, (select * from fnEstadium (P.CodEstadium)) as Estadium, (cast(P.GolesTeamA as varchar)) + '-' + (cast(P.GolesTeamA as varchar)) as Score, P.Fecha from TMatch P Using this functions: If object_id ('fnTeam','fn')is not null drop function fnTeam go create function fnTeam(@CodTeam varchar(5)) returns table return(Select Name from TTeam where CodTeam = @CodTeam) go select * from fnTeam ('Eq001') go ----**** If object_id ('fnEstadium','fn')is not null drop function fnEstadium go create function fnEstadium(@CodEstadium varchar(5)) returns table return(Select Name from TEstadium where CodEstadium = @CodEstadium) go I hope I'd explained myself well, and I thank you help in advance

Read the article

OS Development. Only Few Particular Questions

- by Total Anime Immersion

I am new to this site as a member but have consulted its answers quite a lot of times. Besides my questions regarding OS Development hasn't been answered in any forum. In OS Dev. we make a bootloader. The org point is 7C00H. Why so? Why not 0000h? What are the last two signatures in the bootloader used for? People on every forum have answered that it is important for the system to recognize it as a bootable media. But I want a specific answer. What do each of those signatures do. I have the basic concept of a kernel. Point is.. it relates to different files required in a system. It sort of binds up everything that is individually developed. Now the thing is that that I have floating ideas in my mind regarding different aspects like keyboard, mouse, etc.. how do I put them all together? Which should I start with first? If possible please provide a step by step procedure of the startups of the kernel. Suppose I have developed my language entirely in C and Assembly. Now questions is will exe files work on my system.. if it doesn't then I have to create my own files and publish them. Which is a bad idea.. next step would be for me to go for a compiler for a language which I have designed myself. Now the point is.. How do I implement the compiler into my OS? After all this my final question is that.. How do you go about multitasking and multithreading? and I don't want to use int 21h as its dos specific.. how do I go about making files, renaming them, etc. and all assembly books teach 16 but programming.. how do i go about doing 32 bit or 64 bit with the knowledge I have.. if the basics and instructions are the same.. I don't mind.. but how do i go about otherwise? Don't tell me to give up the idea because I WON'T. And don't tell me it's too complex because I have a sharp knowledge of working of a system, C, Java, Assembly, C++ and python, C#, visual basic.. and not just basics but full fledged api developments.. but I really want to go deep into the systems part.. so I want professional help.. And I have gone through many OS project files but I want help particularly from this site as there are people with knowledge depth who can guide me the right way. And please don't suggest any books above 20$ and they should be available on flipkart as amazon charges massively for shipping and I prefer free shipping from flipkart.

Read the article

SQL SERVER – Puzzle to Win Print Book – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY

- by pinaldave

Some time an interesting feature and smart audience makes total difference at places. From last two days, I have been writing on SQL Server 2012 feature FIRST_VALUE and LAST_VALUE. Please read following post before I continue today as this question is based on the same. Introduction to FIRST_VALUE and LAST_VALUE Introduction to FIRST_VALUE and LAST_VALUE with OVER clause As a comment of the second post I received excellent question from Nilesh Molankar. He asks what will happen if we change few things in the T-SQL. I really like this question as this kind of questions will make us sharp and help us perform in critical situation in need. We recently publish SQL Server Interview Questions book. I promise that in future version of this book, we will for sure include this question. Instead of repeating his question, I am going to ask something very similar to his question. Let us first run following query (read yesterday’s blog post for more detail): USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query. Now let us change the ORDER BY clause of OVER clause in above query and see what is the new result. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now let us see the result and ready for interesting question: Puzzle You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Hint Let me give you a simple hint. Just for simplicity I have changed the order of columns selected in the SELECT and ORDER BY (at the end). This will not change resultset but just order of the columns as well order of the rows. However, the data remains the same. USE AdventureWorks GO SELECT s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID GO Above query returns following result: Now I am very sure all of you have figured out the solution. Here is the second hint – pay attention to row 2, 3, 4, and 10. Hint2 T-SQL Enhancements: FIRST_VALUE() and LAST_VALUE() MSDN: FIRST_VALUE and LAST_VALUE Rules Leave a comment with your detailed answer by Nov 15′s blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Performing an upgrade from TFS 2008 to TFS 2010

- by Enrique Lima

I recently had to go through the process of migrating a TFS 2008 SP1 to a TFS 2010 environment. I will go into the details of the tasks that I went through, but first I want to explain why I define it as a migration and not an upgrade. When this environment was setup, based on support and limitations for TFS 2008, we used a 32 bit platform for the TFS Application Tier and Build Servers. The Data Tier, since we were installing SP1 for TFS 2008, was done as a 64 bit installation. We knew at that point that TFS 2010 was in the picture so that served as further motivation to make that a 64bit install of SQL Server. The SQL Server at that point was a single instance (Default) installation too. We had a pretty good strategy in place for backups of the databases supporting the environment (and this made the migration so much smoother), so we were pretty familiar with the databases and the purpose they serve. I am sure many of you that have gone through a TFS 2008 installation have encountered challenges and trials. And likely even more so if you, like me, needed to configure your deployment for SSL. So, frankly I was a little concerned about the process of migrating. They say practice makes perfect, and this environment I worked on is in some way my brain child, so I was not ready nor willing for this to be a failure or something that would impact my client’s work. Prior to going through the migration process, we did the install of the environment. The Data Tier was the same, with a new Named instance in place to host the 2010 install. The Application Tier was in place too, and we did the DefaultCollection configuration to test and validate all components were in place as they should. Anyway, on to the tasks for the migration (thanks to Martin Hinselwood for his very thorough documentation): Close access to TFS 2008, you want to make sure all code is checked in and ready to go. We stated a difference of 8 hours between code lock and the start of migration to give time for any unexpected delay. How do we close access? Stop IIS. Backup your databases. Which ones? TfsActivityLogging TfsBuild TfsIntegration TfsVersionControl TfsWorkItemTracking TfsWorkItemTrackingAttachments Restore the databases to the new Named Instance (make sure you keep the same names) Now comes the fun part! The actual import/migration of the databases. A couple of things happen here. The TfsIntegration database will be scanned, the other databases will be checked to validate they exist. Those databases will go through a process of data being extracted and transferred to the TfsVersionControl database to then be renamed to Tfs_<Collection>. You will be using a tool called tfsconfig and the option import. This tool is located in the TFS 2010 installation path (C:\Program Files\Microsoft Team Foundation Server 2010\Tools), the command to use is as follows: tfsconfig import /sqlinstance:<instance> /collectionName:<name> /confirmed Where <instance> is going to be the SQL Server instance where you restored the databases to. <name> is the name you will give the collection. And to explain /confirmed, well this means you have done a backup of the databases, why? well remember you are going to merge the databases you restored when you execute the tfsconfig import command. The process will go through about 200 tasks, once it completes go to Team Foundation Server Administration Console and validate your imported databases and contents. We’ll keep this manageable, so the next post is about how to complete that implementation with the SSL configuration.

Read the article

SQL SERVER – Monitoring SQL Server Database Transaction Log Space Growth – DBCC SQLPERF(logspace) – Puzzle for You

- by pinaldave

First of all – if you are going to say this is very old subject, I agree this is very (very) old subject. I believe in earlier time we used to have this only option to monitor Log Space. As new version of SQL Server released we all equipped with DMV, Performance Counters, Extended Events and much more new enhancements. However, during all this year, I have always used DBCC SQLPERF(logspace) to get the details of the logs. It may be because when I started my career I remember this command and it did what I wanted all the time. Recently I have received interesting question and I thought, I should request your help. However, before I request your help, let us see traditional usage of DBCC SQLPERF(logspace). Every time I have to get the details of the log I ran following script. Additionally, I liked to store the details of the when the log file snapshot was taken as well so I can go back and know the status log file growth. This gives me a fair estimation when the log file was growing. CREATE TABLE dbo.logSpaceUsage ( id INT IDENTITY (1,1), logDate DATETIME DEFAULT GETDATE(), databaseName SYSNAME, logSize DECIMAL(18,5), logSpaceUsed DECIMAL(18,5), [status] INT ) GO INSERT INTO dbo.logSpaceUsage (databaseName, logSize, logSpaceUsed, [status]) EXEC ('DBCC SQLPERF(logspace)') GO SELECT * FROM dbo.logSpaceUsage GO I used to record the details of log file growth every hour of the day and then we used to plot charts using reporting services (and excel in much earlier times). Well, if you look at the script above it is very simple script. Now here is the puzzle for you. Puzzle 1: Write a script based on a table which gives you the time period when there was highest growth based on the data stored in the table. Puzzle 2: Write a script based on a table which gives you the amount of the log file growth from the beginning of the table to the latest recording of the data. You may have to run above script at some interval to get the various data samples of the log file to answer above puzzles. To make things simple, I am giving you sample script with expected answers listed below for both of the puzzle. Here is the sample query for puzzle: -- This is sample query for puzzle CREATE TABLE dbo.logSpaceUsage ( id INT IDENTITY (1,1), logDate DATETIME DEFAULT GETDATE(), databaseName SYSNAME, logSize DECIMAL(18,5), logSpaceUsed DECIMAL(18,5), [status] INT ) GO INSERT INTO dbo.logSpaceUsage (databaseName, logDate, logSize, logSpaceUsed, [status]) SELECT 'SampleDB1', '2012-07-01 7:00:00.000', 5, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 9:00:00.000', 16, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 11:00:00.000', 9, 10, 0 UNION ALL SELECT 'SampleDB1', '2012-07-01 14:00:00.000', 18, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-01 7:00:00.000', 5, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-04 7:00:00.000', 15, 10, 0 UNION ALL SELECT 'SampleDB3', '2012-06-09 7:00:00.000', 25, 10, 0 GO Expected Result of Puzzle 1 You will notice that there are two entries for database SampleDB3 as there were two instances of the log file grows with the same value. Expected Result of Puzzle 2 Well, please a comment with valid answer and I will post valid answers with due credit next week. Not to mention that winners will get a surprise gift from me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: DBCC

Read the article

Lead, Follow, or Get out of the way

- by Daniel Moth

This is one of the sayings (attributed to Thomas Paine) that totally resonated with me from the first time I heard it, which was only 3 years ago during some training course at work: "Lead, Follow, or Get out of the way" You'll find many books with this title and you'll find it quoted by politicians and other leaders in various countries at various times... the quote is open to interpretation and works on many levels. To set the tone of what this means to me, I'll use a simple micro example: In any given conversation, you are either leading it or following it, at different times/snapshots of the conversation. If you are not willing or able to lead it, and you are not willing or able to follow it, then you should depart. The bad alternative which this guidance encourages you NOT to do is to stick around and obstruct progress by not following, not leading, and simply complaining or trying to derail the discussion in no particular direction. The same pattern applies at your position/role at work. Either follow your management/leadership team, or try to lead them to what you think is a better place, or change jobs. Don't stick around complaining about the direction things are going, while not actively trying to either change things or make peace with it. In the previous paragraph you can replace the word "your management" with "the people reporting to you" and the guidance still holds. Either lead your direct reports to where you think they should go, or follow their lead, or change jobs. Complaining about folks not taking direction while doing nothing is not a maintainable state. To me this quote is not about a permanent state, it is not about some people always leading and some always following: It is about a role/hat that anybody can play/wear at any given moment. One minute I am leading you, the next I am following you, and the next we are both following someone else and so on... When there is disagreement, debate the different directions for as long as it takes for you to be comfortable that you can either follow or lead. If you don't become comfortable with either of those, get out of the way. Something to remember is that it is impossible to learn how to lead well, without learning how to follow well (probably deserves its own blog entry)... Things go wrong when someone thinks that they must always be leading, or when everybody wants to follow and nobody steps up to lead... Things go wrong when more than one person wants to lead and they don't try to reach agreement on a shared direction, stubbornly sticking to their guns pulling the rest of the team in multiple directions... Things go wrong when more than one person wants to lead and after numerous and lengthy discussions, none of them decides to follow or get out of the way... Things go wrong when people don't want to lead, don't want to follow, and insist on sticking around... While there are a few ways things that can go wrong as enumerated in the previous paragraph, the most common one in my experience is the last one I mentioned. You'll recognize these folks as the ones that always complain about everything that is wrong with their company/product but do nothing about it. Every time you hear someone giving feedback on how something is wrong or suboptimal, ask them "So now that you identified the problem, what do you think the solution is and what are you doing to drive us to that solution?" The next time things start going wrong, step up and remind everyone: Lead, Follow, or Get out of the way. For more perspectives, and for input to help you form your own interpretation, search the web for this phrase to see in what contexts it is being used (bing, google). Finally, regardless of your political views, I hope you can appreciate if only as an example this perspective of someone leading by actually getting out of the way. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Does query plan optimizer works well with joined/filtered table-valued functions?

- by smoothdeveloper

In SQLSERVER 2005, I'm using table-valued function as a convenient way to perform arbitrary aggregation on subset data from large table (passing date range or such parameters). I'm using theses inside larger queries as joined computations and I'm wondering if the query plan optimizer work well with them in every condition or if I'm better to unnest such computation in my larger queries. Does query plan optimizer unnest table-valued functions if it make sense? If it doesn't, what do you recommend to avoid code duplication that would occur by manually unnesting them? If it does, how do you identify that from the execution plan? code sample: create table dbo.customers ( [key] uniqueidentifier , constraint pk_dbo_customers primary key ([key]) ) go /* assume large amount of data */ create table dbo.point_of_sales ( [key] uniqueidentifier , customer_key uniqueidentifier , constraint pk_dbo_point_of_sales primary key ([key]) ) go create table dbo.product_ranges ( [key] uniqueidentifier , constraint pk_dbo_product_ranges primary key ([key]) ) go create table dbo.products ( [key] uniqueidentifier , product_range_key uniqueidentifier , release_date datetime , constraint pk_dbo_products primary key ([key]) , constraint fk_dbo_products_product_range_key foreign key (product_range_key) references dbo.product_ranges ([key]) ) go . /* assume large amount of data */ create table dbo.sales_history ( [key] uniqueidentifier , product_key uniqueidentifier , point_of_sale_key uniqueidentifier , accounting_date datetime , amount money , quantity int , constraint pk_dbo_sales_history primary key ([key]) , constraint fk_dbo_sales_history_product_key foreign key (product_key) references dbo.products ([key]) , constraint fk_dbo_sales_history_point_of_sale_key foreign key (point_of_sale_key) references dbo.point_of_sales ([key]) ) go create function dbo.f_sales_history_..snip.._date_range ( @accountingdatelowerbound datetime, @accountingdateupperbound datetime ) returns table as return ( select pos.customer_key , sh.product_key , sum(sh.amount) amount , sum(sh.quantity) quantity from dbo.point_of_sales pos inner join dbo.sales_history sh on sh.point_of_sale_key = pos.[key] where sh.accounting_date between @accountingdatelowerbound and @accountingdateupperbound group by pos.customer_key , sh.product_key ) go -- TODO: insert some data -- this is a table containing a selection of product ranges declare @selectedproductranges table([key] uniqueidentifier) -- this is a table containing a selection of customers declare @selectedcustomers table([key] uniqueidentifier) declare @low datetime , @up datetime -- TODO: set top query parameters . select saleshistory.customer_key , saleshistory.product_key , saleshistory.amount , saleshistory.quantity from dbo.products p inner join @selectedproductranges productrangeselection on p.product_range_key = productrangeselection.[key] inner join @selectedcustomers customerselection on 1 = 1 inner join dbo.f_sales_history_..snip.._date_range(@low, @up) saleshistory on saleshistory.product_key = p.[key] and saleshistory.customer_key = customerselection.[key] I hope the sample makes sense. Much thanks for your help!

Read the article

Delphi How to wait for socket answer inside procedure?

- by Astronavigator

For some specific needs i need to create procedure that waits for socket request (or answer) in dll: TForm1 = class(TForm) ServerSocket1: TServerSocket; ...... procedure MyWaitProc; stdcall; begin Go := false; while not Go do begin // Wating... // Application.ProcessMessages; // Works with this line end; end; procedure TForm1.ServerSocket1ClientRead(Sender: TObject; Socket: TCustomWinSocket); begin MessageBoxA(0, PAnsiChar('Received: '+Socket.ReceiveText), '', MB_OK); Go := true; end; exports MyWaitProc; When I call Application.ProcessMessages everything works fine: application waits for request and then continues. But in my case calling Application.ProcessMessages causes to unlocking main form on host application (not dll's one). When I don't call Application.ProcessMessages application just hangs couse it cannot handle message... So, how to create such a procedure that's wating for socket answer ? Maybe there a way to wait for socket answer without using Application.ProcessMessages ? EDIT I also tried to use TIdTCPServer, for some reasons, the result is the same. TForm1 = class(TForm) IdTCPServer1: TIdTCPServer; ..... procedure MyWaitProc; stdcall; begin Go := false; while not Go do begin // Waiting ... // Application.ProcessMessages; end; end; procedure TForm1.IdTCPServer1Execute(AContext: TIdContext); var s: string; begin s := AContext.Connection.Socket.ReadString(1); AllText := AllText + s; Go := True; end;

Read the article

Problem with duplicates in a SQL Join

- by Chris Ballance

I have the following result set from a join of three tables, an articles table, a products table, an articles to products mapping table. I would like to have the results with duplicates removed similar to a select distinct on content id. Current result set: [ContendId] [Title] [productId] 1 article one 2 1 article one 3 1 article one 9 4 article four 1 4 article four 10 4 article four 14 5 article five 1 6 article six 8 6 article six 10 6 article six 11 6 article six 13 7 article seven 14 Desired result set: [ContendId] [Title] [productId] 1 article one * 4 article four * 5 article five * 6 article six * 7 article seven * Here is condensed example of the relevant SQL: IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'tempdb.dbo.products') AND type = (N'U')) drop table tempdb.dbo.products go CREATE TABLE tempdb.dbo.products ( productid int, productname varchar(255) ) go IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'articles') AND type = (N'U')) drop table tempdb.dbo.articles go create table tempdb.dbo.articles ( contentid int, title varchar(255) ) IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'articles') AND type = (N'U')) drop table tempdb.dbo.articles go create table tempdb.dbo.articles ( contentid int, title varchar(255) ) IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'articleproducts') AND type = (N'U')) drop table tempdb.dbo.articleproducts go create table tempdb.dbo.articleproducts ( contentid int, productid int ) insert into tempdb.dbo.products values (1,'product one'), (2,'product two'), (3,'product three'), (4,'product four'), (5,'product five'), (6,'product six'), (7,'product seven'), (8,'product eigth'), (9,'product nine'), (10,'product ten'), (11,'product eleven'), (12,'product twelve'), (13,'product thirteen'), (14,'product fourteen') insert into tempdb.dbo.articles VALUES (1,'article one'), (2, 'article two'), (3, 'article three'), (4, 'article four'), (5, 'article five'), (6, 'article six'), (7, 'article seven'), (8, 'article eight'), (9, 'article nine'), (10, 'article ten') INSERT INTO tempdb.dbo.articleproducts VALUES (1,2), (1,3), (1,9), (4,1), (4,10), (4,14), (5,1), (6,8), (6,10), (6,11), (6,13), (7,14) GO select DISTINCT(a.contentid), a.title, p.productid from articles a JOIN articleproducts ap ON a.contentid = ap.contentid JOIN products p ON a.contentid = ap.contentid AND p.productid = ap.productid ORDER BY a.contentid

Read the article

How can I change the back button function in navigation toolbar?

- by jackrobert

I have developed a simple web application using JSP. It has a login page which contains username, password fields and sumbit button. It has a logout page which contains a link to the login page. And there are some pages like page1, page2, page3, page4, etc. Normal workflow is the following: After login comes page1. Then click some action and it will go to page2. Then click some action and it will go to page3. Then click some action and it will go to page4. So now I am in page4. Now click back button in navigation toolbar in browser, generally go to previous page (page3). But my requirement is, if you click back button in navigation toolbar from any page in the application, then you should go to logout page. For example: if you are in page4 and press the back button, then you should go to logout page and not to page3. How to achieve this? Is it anyway possible? Maybe with Javascript?

Search Results

Search found 29191 results on 1168 pages for 'joel in go'.

Page 62/1168 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >

- by Mysticgeek

- by Steve Tunstall

- by Fabiano Amorim

- by chobo2

- by Bil Simser

- by chanderdhall

- by devoured elysium

- by Jason Crease

- by Brandi

- by Miguel Ping

- by DavRob60

- by SidC

- by chobo2

- by Brisonela

- by Total Anime Immersion

- by pinaldave

- by Enrique Lima

- by pinaldave

- by Daniel Moth

- by smoothdeveloper

- by Astronavigator

- by Chris Ballance

- by jackrobert

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >