Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 62/516 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Trouble with installing Ubuntu 14.04 alongside Windows 8.1

    - by user3121138
    I work with Windows 8.1 and today I installed Ubuntu 14.04 alongside it, but now I can't set the boot menu to display both OS. When I boot the system it normally loads Windows 8.1 without opening the boot menu. I created a boot USB with Yumi. When booting with Yumi and selecting "boot from hard disk", Ubuntu turned on. My drives: My laptop is a Fujitsu Lifebook AH532/G52 and the BIOS is a Phoenix v1.10

    Read the article

  • Ubuntu Installation Help for an IBM R31 Thinkpad

    - by David Taylor
    I recently acquired an old IBM R31 Thinkpad, and I'd figure I'd install Lubuntu on it. I've followed the quick steps for USB installation on the help wiki page, but I can't seem to get it to boot from my formatted flash drive. I've checked the boot priority on the BIOS page, but the option to boot from USB doesn't even seem to be there. The only bootable options are legacy and USB floppy drives. The CD drive is shot, so I can't install from there either. Do I have any other options for installation without having to pay for a floppy drive or a replacement CD drive? The wiki pages mentions something about installation from within Windows. Would it be possible to remove Windows using this option, or would it just create a partition? Thanks

    Read the article

  • Installing Ubuntu 14.04 on macbook pro EFI

    - by user279771
    Macbook pro: mavericks, 5.2, graphics: nvidia geforce 9600M I followed the guides from here: https://help.ubuntu.com/community/UEFIBooting#Detect_.28U.29EFI_firmware_processor_architecture and http://www.rodsbooks.com/ubuntu-efi/. What I have is the following: /dev/sda apple partitions /boot / (root) swap When installing ubuntu, I did not install the boot loader during installation but did so in a chroot environment after installing grub-efi. I installed grub to /dev/sda1 (efi) which created the grub64.efi file in efi/ubuntu. This allows the refined boot manager to bring up grub and select ubuntu however, the graphics does not work. Even after adding nomodeset and removing quiet/splash from the kernel parameters. Any ideas on what could be wrong? To be clear, if I remove quiet/splash, I can see all the text startup messages being printed out however, the display manager doesn't appear to start (the screen stays black). Oddly enough though, the ubuntu startup sound can be heard.

    Read the article

  • LiveCD does not work on my desktop

    - by Boris
    I've installed Oneiric on my laptop without any issue using the LiveCD downloaded here (from the French Ubuntu community server). But on my desktop, weird things happen: During the 1st try booting with the LiveCD on my desktop, my 2 year old child just hit the keyboard, and after several error messages the desktop loaded and I've been able to test Oneiric. But I wanted to redo a boot before installing Oneiric to avoid mistakes. So during the 2nd time I tried to boot with the LiveCD, I couldn't access to the point where I can choose to test or install. Before trying a 3rd time, I've "cleaned the system" from System Parameter System. But after that I'm still not able to access to the point where I can choose to test or install. Now it stops all the time on a black screen. I do not understand why several boot attempts with same CD have several results. So I wonder if the state of my current installation 11.04 can affect re-booting with my CD 11.10 ?

    Read the article

  • How to run Ubuntu fully in initramfs?

    - by miernik
    I have a machine with 10 GB of RAM, and I would like to run Ubuntu on it (Debian also OK if its easier), fully in RAM in such a way: I boot from a compressed image on an USB flash disk, that is uncompressed into RAM, and then I can remove the disk from the USB slot, and use the system only with RAM, without any permanent disk. Whenever I make any changes that I want permanent, I would put the flash disk back into the USB slot (possibly not the same one as I used initially to boot, as I would like to keep many versions of the boot flash disk), and run some command that would save the current state into a compressed image on the disk. How can I set this up?

    Read the article

  • Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

    [Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

    Read the article

  • How to avoid HDD spin up at system start? (Ubuntu from SSD)

    - by Oliver
    Thanks to hdparm -B1 /dev/sdb my HDD does no longer spin up when powered up on boot. But after completing the BIOS POST messages and starting Ubuntu the HDD gets a signal over the SATA data cable and spins up. Leaving the data cable (but still with plugged in SATA power cable) let the system boot up completely from my SSD without spinning up the HDD. What causes the HDD to spin up? Maybe Grub2? Edit: nope, doesn't seem to be Grub2 that spins up the drive. I just set up Grub to show its menu without timer. Nothings happens until I hit the Ubuntu standard boot option, then a few seconds later the drive spins up.

    Read the article

  • Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

    - by Don Myers
    My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

    Read the article

  • Ubuntu boots to black screen after failed upgrade from 12.04 to 12.10

    - by ywx
    This happened when I tried to upgrade from 12.04 to 12.10. I don't know whether the upgrade process had completed downloading and installing packages or whether it was still in progress, but I got a message The application Compiz has closed unexpectedly. At that point, my mouse stopped working so I switched to tty1 by Ctrl+Alt+F1 and rebooted from there. I then found that I could not boot into Ubuntu any more. My screen stayed first purple then black. I went back to tty1 and it said I was running 12.10. I tried some suggestions in this thread on Ubuntuforums: Wubi blank purple screen than blank black screen and this one: How to set NOMODESET and other kernel boot options in grub2 but nothing seemed to work. I can boot Windows as normal. I am using Wubi on Windows7. My laptop is a Lenovo T410i with NVIDA NVS 3100m

    Read the article

  • Grub rescue after installing Ubuntu from USB

    - by Victor Suarez
    I have Windows 7 installed in my internal HDD and wanted to try out Ubuntu so I have an USB to put Ubuntu LiveUSB on and installed Ubuntu on a external HDD and everything worked out fine. Now the problem. If I remove the external HDD and try to boot Windows normally it shows the grub rescue screen. The only way to boot into Windows is by having the external HDD attached. Is there any way I can make it so I won't have to have the external HDD attached to be able to boot my Windows 7?

    Read the article

  • Grub rescue problem after installing ubuntu

    - by Victor Suarez
    I have windows 7 installed in my internal hdd and wanted to try out Ubuntu so I got a USB to put Ubuntu LiveUSB on and installed Ubuntu on an external HDD and everything worked out fine. Now the problem. If I remove the external hdd and try to boot windows normally it shows the grub rescue screen. The only way to boot into windows is by having the external hdd attached. Is there any way I can make it so I wont have to have the external hdd attached to be able to boot my windows 7?

    Read the article

  • Ubuntu 12.04 crashes on startup for newer versions of Linux, possibly related to WiFi

    - by Jake
    My computer gets to the screen with the Ubuntu logo and the orange/white dots, and then the screen goes black, spits out a lot of error messages, and cannot boot. (If it'd be helpful, I can take a photo of my screen in this state.) I've found I can successfully boot if my wireless card is turned off. As soon as I turn it on, my computer crashes with the same black screen of death. I can also successfully boot if I choose "Previous Linux Version" and select a few versions back (I think 3.0.6). Here are some relevant details about my setup: Ubuntu 12.04 Computer: Lenovo x230 Wireless: Realtek RTL8188CE 802.11b/g/n WiFi Adapter Processor: Intel Core i5-3210M CPU @ 2.50GHz × 4 RAM: 16 GB of RAM Thank you!!!

    Read the article

  • removing ubuntu from a laptop (corrupted ubuntu)

    - by Ron
    I wanted to update my (very old) Ubuntu installation on my dual boot laptop. The other OS is win7. However, when I tried to boot into it I got: \ubuntu\winboot\wubildr.mbr cannot be loaded. Status 0xE0000000C. I assume the mbr is the master boot record for the Ubuntu installation. I looked at my C: drive and there's a WUBILDR and WUBILDR.MBR file there. Is it as simple as deleting them? ALSO, I just noticed there is no UBUNTU partition. If I delete these files and then get rid of the startup option for Ubuntu, is that all I have to do? (My goal is to have an up-to-date Ubuntu OS alongside Win 7).

    Read the article

  • BURG broken by Windows

    - by Sallée
    I have successfully installed, using Super Boot Manager, BURG in a computer at my work. After I boot into Windows XP, BURG is no longer operational. The machine just boots to the BIOS screen, goes black, and then boots to the BIOS screen again ad infinitum. The only way to recover I have found so far is to use a Boot-Repair USB, which restores either GRUB2 or MBR, not BURG. Everything works fine under GRUB2, but I prefer the improved look of BURG to make things easier on my students.

    Read the article

  • How do I run update-grub from a LiveCD?

    - by Kelley
    Okay, so I did something stupid. I was trying to clean up my Grub entries, and accidentally removed all of my Linux kernels from Grub (they're still on the hard drive). So now, obviously, Grub doesn't give me any way to boot into Ubuntu; I can boot into Windows just fine, but Ubuntu isn't even listed. So I just want to run "sudo upgrade-grub" somehow to restore Ubuntu to the list. I can boot from a LiveCD, but once there how do I run that command? (My Ubuntu installation is on sda5, by the way.)

    Read the article

  • mnt/sdb1 is not ready or present press "s"to skip "M"

    - by user290508
    Hi there could you help me please? I installed Ubuntu 14.04 and all was well until arecent update mess things up. Now when I boot up it get stuck at " mnt/sdb1 is not ready or present press "s"to skip "M" to manually repair plus another choice. If select M you get to a dead end and have to reboot. I usually skip to boot. The other choice gets me to the boot screen where you can choose Ubunu and other choice. Right next to U the Ubuntu choice I see "*Ubuntu" that is very strange . Can you help? I don't want to reinstall.

    Read the article

  • How to partition a fully used hard drive

    - by MineCraftMan39
    I installed Ubuntu on my laptop which when I got it I had Fedora 13 installed on it as the OS. Now I want to install Fedora 18 in a dual boot with Ubuntu. Problem is when I installed Ubuntu, I didn't partition for dual boot and I gave the entire hard drive to Ubuntu and no longer have the space to dual boot. How can I lower the partition on Ubuntu to make space on the hard drive for Fedora? I want to split the hard drive 50/50 between the two. Thanks in advance.

    Read the article

  • How to force update-grub to use UUID?

    - by user276851
    When I run "update-grub", the file "grub.cfg" will contain lines like this. menuentry 'Ubuntu...' { ... linux /boot/vmlinuz... root=/dev/md124 ... ... } For the line of linux, is it possible to let it use UUID? Like, linux /boot/vmlinux... root=UUID=xxx Right now, every time after I do update-grub, I have to manually edit the line to use UUID. Otherwise, the boot will fail. Thanks for the help.

    Read the article

  • Encrypted Ubuntu Partition HELP!

    - by user207984
    I had Zorin 7 Encrypted. I accidentally deleted important GRUB data trying to make more room in the boot folder i think? So the computer would no longer boot up. Anyways, I installed a second Linux OS on the same laptop, but I am unable to access all of my important information that is still on the encrypted partition. When i go to mount it to access everything, it asks for the encryption password... however, it tells me the password is incorrect, which I know 100% that it is the correct password. Someone please help me! Inform me how I can access this encrypted partition or restore the data so that I can boot the computer in Zorin 7 again.

    Read the article

  • How to load the environment variables at boot time before X11 on Ubuntu Precise?

    - by Fnux
    Using Ubuntu Precise 64 bit, I'm facing a problem that I'm unable to solve and that I'll try to describe below: I'm using a console mode program (let's say abc) that uses Go, NodeJS, Java and Scala. In order for abc to work with these languages, I've to declare the following statements: a) within /etc/environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar b) within /etc/login.defs ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin c) a) within /etc/sudoers: `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin"` Then, when I start abc from a terminal, all is fine and I can use any of the 4 languages described above. However, if I put a script within /etc/init.d that starts abc during the boot process (i.e. before to start the GUI), using Java from abc still is fine, but using Go, NodeJS or Scala doesn't work anymore. Then, I guess that during the boot process, the script within /etc/init.d that starts abc is executed before that the different environment variables set within /etc/sudoers, /etc/environment and /etc/login.defs are loaded. So, my question is: how to force the environment variables to be loaded before that my script starting abc is launched? Any help and advice on this topic would be trully appreciated. TIA. Cheers. Thanks again to Mark and Danila. Below is the current "abc" script file that I put within /etc/init.d `#! /bin/sh ### EDIT: ADD THIS VARS DEFINITIONS: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar "ENV_SUPATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "ENV_PATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "Defaults secure_path"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ##### EXPORT this VARS so they are accessible to children:" export "PATH" "CLASSPATH" "ENV_SUPATH PATH" "ENV_PATH PATH" "Defaults secure_path" `### BEGIN INIT INFO `# Provides: abc `# Required-Start: $remote_fs $syslog `# Required-Stop: $remote_fs $syslog `# Default-Start: 2 3 4 5 `# Default-Stop: 0 1 6 `# Short-Description: abc initscript `# Description: This iniscript starts and stops abc `### END INIT INFO `# Author: Fnux, fnux.fl at gmail dot com `# Version: 1.2 `# Note: (edit ABC_PATH if abc isn't installed in /opt/abc) NAME=abc ABC_PATH=/opt/abc START="-d" STOP="-k" VERSION="-v" SCRIPTNAME=/etc/init.d/$NAME STARTMESG="\nStarting abc in deamon mode." UPMESG="\n$NAME is running." DOWNMESG="\n$NAME is not running." STATUS=`pidof $NAME` `# Exit if abc is not installed [ -x "$ABC_PATH/$NAME" ] || exit 0 case "$1" in start) echo $STARTMESG cd $ABC_PATH ./$NAME $START ;; stop) cd $ABC_PATH ./$NAME $STOP ;; status) if [ "$STATUS" > 0 ] ; then echo $UPMESG else echo $DOWNMESG fi ;; restart) cd $ABC_PATH ./$NAME $STOP echo $STARTMESG ./$NAME $START ;; version) cd $ABC_PATH ./$NAME $VERSION ;; *) echo "Usage: $SCRIPTNAME {start|status|restart|stop|version}" >&2 exit 3 ;; esac : So, where and how should I write the needed environment variables for: a) Go needs the following statements (ie: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin") b) and Scala needs this one: (ie CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar). TIA for an explanation how to do so. Cheers.

    Read the article

  • Fedora 19 no longer bootable

    - by Parisa
    I had fedora dual-booted with windows on my laptop for a while but with windows refresh grub was gone and my system directly booted windows. I booted fedora with my systems boot options and with this tutorial: https://fedoraproject.org/wiki/GRUB_2 I reinstalled grub2 but then had my system booted into an empty grub prompt: grub So I found the drive containing vmlinuz and initramfs (completely sure about thair location and versions) and tried to manually boot it but after the boot command it said: no suitable video mode found booting in blind mode and nothing happened. Such a tragedy... I have already tried to use live disks rescue system. Funny but troubleshooting options don't apear on my laptop while they do on my desktop pc. I cant even go to boot prompt on my lenovo idepad z400 laptop. I also tried EasyBCD so maybe I could boot it with windows but it comes up with this error: missing AutoNeoGrub().mbr Now I have removed the grub prompt (don't know why) and its really hard for me to reinstall my dearly customized fedora. If anyone knows a way to help boot it again or reinstall it keeping my files and installations I really need it. Thanks PS:I have already tried Boot-repair Disk but it asks me to enable the repo containing grub-efi on my fedora to reinstall the grub2 and fix the boot for me (how could i?).

    Read the article

  • Linux: How to delay hddtemp service start at boot until all hdd are visible?

    - by Atis
    I live in a hot and humid environment, therefore I monitor the hdd temperature using hddtemp and gkrellm. There is an LSI9211 8i sata/sas controller in my computer. I have drives connected to both my motherboard and the LSI. hddtemp monitors only the drives directly connected to my motherboard after booting the system, therefore gkrellm displays the temperature of those drvies only. Logging in and restarting hddtemp before starting gkrellm fixes my issue, i.e. drives connected to the LSI controller are also visible. It seems that the drives connected to the LSI controller become visible only after hddtemp is started in the boot sequence. I think delaying it would help. How can I delay the starting of hddtemp till all drives are visible? I prefer a way to check if drives are visible to the delay of a specific amount of seconds.

    Read the article

  • Why my laptop doesnt boot in any OS (windows or ubuntu) after RAM upgrade?

    - by qrsq
    My laptop previously had 2 slots of RAM ( 1x1Gb , 1x2GB , both were clocked at 1066mhz) and it was working on windows 7 x86 OS. I Upgraded the ram with ( 2x4GB clcoked at 1333mhz). Bios displayed 8192MB of memory and windows was working ok but (only 2.99GB of ram from 8gb was avabile). So i decided to switch to an x64 system to be able to use all the amount of memory. But the laptop wasnt able to install any os (windows 7 x64 or windows 8 x64) so i placed the 3gb of ram instead of 8gb. Then i succesfully instaled an x64 os (windows 8). After than i placed the 8gb ram back again. Now the computer doesnt boot in the os but bios is working normally. I tried also to install ubuntu , without any succes. What should i do ?? All the help will be appreciated. thanks

    Read the article

  • Unable to boot to Ubuntu. Inconsistency in disk, X server didn't start. Illegal blocks in Inode

    - by becomingGuru
    I am unable to boot into my Ubuntu system. First I get that fsck died with exit status 4 Then I try to do it manually as prompted and I get that an Inode has illegal blocks and asked to clear it. Upon googling, I found that is because my HD has some problems I booted via Live cd and took a dd of the entire Ubuntu on an external HDD just in case. Is it safe to clear all the illegal blocks. How do I safely restore my environment if I replace my HD. Is there any thing i can do in the meanwhile to continue to use my laptop without significant loss of data. Perhaps a related error, the x server fails to start

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >