Search Results

Search found 10859 results on 435 pages for 'raid controller'.

Page 62/435 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• Application tried to present modally an active controller ios

  - by Matthew

  I was trying to set the ViewController with a parent view controller before it shows show that it can provide call backs, I done this using PrepareForSegue - (void) prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender { if ([segue.identifier isEqualToString:@"newQuarter"]) { [segue.destinationViewController setParentViewController:self]; } } It crashed giving me the error message: Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Application tried to present modally an active controller. So I tried using another method and set up a new view controller on the button touches up, - (IBAction) buttonClicked { NewViewController *newController = [[NewViewController alloc] init]; [newController setParentViewController:self]; [self presentViewController:newController animated:YES completion:nil]; } but with no luck it is still giving me the same error message, can anyone please advice? Thanks!

  Read the article

• ASP.NET MVC: An Error has occured when trying to create a controller

  - by Grayson Mitchell

  I have got the following error a few times in my MVC applications, and have only managed to get past it by recreating my entire solution from scratch. The error message says make sure there is a paramaterless public constructor, but of course there is one. What else could this error refer to? (It looks like it can't find the controller at all) Code where error occurs public void Page_Load(object sender, System.EventArgs e) { // Change the current path so that the Routing handler can correctly interpret // the request, then restore the original path so that the OutputCache module // can correctly process the response (if caching is enabled). string originalPath = Request.Path; HttpContext.Current.RewritePath(Request.ApplicationPath, false); IHttpHandler httpHandler = new MvcHttpHandler(); **httpHandler.ProcessRequest(HttpContext.Current);** HttpContext.Current.RewritePath(originalPath, false); } Error Message An error occurred when trying to create a controller of type 'Moe.Tactical.Ttas.Web.Controllers.TtasController'. Make sure that the controller has a parameterless public constructor.

  Read the article

• ASP.NET MVC Pass mutiple params from getJson to controller

  - by andyJ

  Hi, I am making a call to a controller action in javascript using the getJson method. I need to pass two parameters to my action method on the controller, but I am struggling to do so. I do not fully understand the routing tables and not sure if this is what I need to use to get this working. Please see example below of what I am trying to do. var action = "<%=Url.Content('~/Postcode/GetAddressResults/')%>" + $get("Premise").value + "/" + $get("SearchPostcode").value $.getJSON(action, null, function(data) { $("#AddressDropDown").fillSelect(data); }); This is my route which I don't understand how to make use of... routes.MapRoute( "postcode", "Postcode/GetAddressResults/{premise}/{postcode}", new { controller = "Motor", action = "GetAddressResults", premise = "", postcode = "" });

  Read the article

• How to integrate KVC in MVC?

  - by Paperflyer

  So I have an MVC-application in Cocoa. There are some custom views, a controller and a model. Of course, the views need to know some stuff, so they get their data from the controller. However, they do not use accessors in the controller, they use KVC with a keypath that calls right through to the model: // In view.m time = [timeSource valueForKeyPath:@"theModel.currentTime"]; // timeSource is a pseudo-delegate of the view that holds the controller This simplifies things a great deal and technically, the views still don't know the model in person (that is, in pointer). But of course, they access it directly. Is that a usual (or at least sensible) usage of KVC and MVC? Or how would you implement this kind of communication?

  Read the article

• jQuery post to another controller

  - by griegs

  If I have a Controller called "HomeController" and I'm on the Index page of that controller, how can I do a jQuery Ajax post to another controller. I tried the below, $.post("/DetailedQuote/jQueryGetDetailedQuote", { productCode: "LPJ" }, function(newHTML) { alert(88); }); I have a DetailedQuoteController. I have also tried; post("DetailedQuote/ post("DetailedQuote.aspx/ post("/DetailedQuote.aspx/ post("/DetailedQuoteController/ post("DetailedQuoteController/ post("DetailedQuoteController.aspx/ post("/DetailedQuoteController.aspx/ And still no joy. I should also mention that this is running a Hybrid WebForms and MVC site on IIS 6.

  Read the article

• Popover with embedded navigation controller doesn't respect size on back nav

  - by quixoto

  I have a UIPopoverController hosting a UINavigationController, which contains a small hierarchy of view controllers. I followed the docs and for each view controller, I set the view's popover-context size like so: [self setContentSizeForViewInPopover:CGSizeMake(320, 500)]; (size different for each controller) This works as expected as I navigate forward in the hierarchy-- the popover automatically animates size changes to correspond to the pushed controller. However, when I navigate "Back" through the view stack via the navigation bar's Back button, the popover doesn't change size-- it remains as large as the deepest view reached. This seems broken to me; I'd expect the popover to respect the sizes that are set up as it pops through the view stack. Am I missing something? Thanks.

  Read the article

• Modal View Controller Undesirably Hides Tab Bar

  - by Kevin Sylvestre

  I am working on an application that requires user authentication to access a profile. The profile section is located solely under one tab (and all others tabs do not require authentication). I currently present a authentication view controller modally (and then dismiss on success) when the user selects the profile tab. However, this approach prevents the user from deciding not to register / login (that is, all tabs are hidden once the authentication screen is presented modally). I don't want the user to be able to dismiss the modal view controller, but rather have it modal only for the profile tab. Is this possible? Can I have tabs visible while having a modal view controller? What is the best approach here. Thanks.

  Read the article

• MongoMapper, Rails, Increment Works in Console but not Controller

  - by Michael Waxman

  I'm using mongo_mapper 0.7.5 and rails 2.3.8, and I have an instance method that works in my console, but not in the controller of my actual app. I have no idea why this is. #controller if @friendship.save user1.add_friend(user2) ... #model ... key :friends_count, Integer, :default => 0 key :followers_count, Integer, :default => 0 def add_friend(user) ... self.increment(:friends_count => 1) user.increment(:followers_count => 1) true end And this works in the console, but in the controller it does not change the follower count, only the friends count. What gives? The only thing I can even think of is that the way that I'm passing the user in is the problem, but I'm not sure how to fix it.

  Read the article

• jQuery autocomplete pass null paramter to the controller in ASP.NET MVC 2

  - by myaesubi

  I'm using jQuery autocomplete plugin from jQuery website calling the controller url which return json in return. The problem is the parameter sent to the controller is always null. Here is the in-browser jQuery code for the autocomplete: $(document).ready(function() { var url = "/Building/GetMatchedCities"; $("#City").autocomplete(url); }); and here is the ASPNET MVC controller signature in C#: public JsonResult GetMatchedCities(string city) { .. return this.Json(query, JsonRequestBehavior.AllowGet); } Thanks in advance, Mohammad

  Read the article

• Trouble setting a default controller in MVC 2 RC Area

  - by mannish

  This should be simple, but alas... I've set up an Admin area within my MVC 2 project (single project areas). I've created a couple controllers and their respective view folders. In the AreaRegistration.RegisterArea method, I've specified that I want the default controller to be "Dashboard": public override void RegisterArea(AreaRegistrationContext context) { context.MapRoute( "Admin_default", "Admin/{controller}/{action}/{id}", new { controller = "Dashboard", action = "Index", id = "" }, new string[] { "Admin" } ); } If I navigate to url/Admin/Dashboard, the index comes up just fine. What I want, though, is to allow the user to go to url/Admin/ and see the same thing. When I do this, however, I get "The resource cannot be found". I'm just getting my feet wet with MVC 2's Area implementation, and I don't think I'm doing anything overly complicated... Anyone had the same problem? Do I need to specify a separate route, perhaps at the root, non-area level?

  Read the article

• Avoiding the Controller with Routing Rules in ASP.NET MVC

  - by Ryan Elkins

  I've created a website with ASP.NET MVC. I have a number of static pages that I am currently serving through a single controller called Home. This creates some rather ugly URLs. example.com/Home/About example.com/Home/ContactUs example.com/Home/Features You get the idea. I'd rather not have to create a controller for each one of these as the actions simply call the View with no model being passed in. Is there a way to write a routing rule that will remove the controller from the URL? I'd like it to look like: example.com/About example.com/ContactUs example.com/Features If not, how is this situation normally handled? I imagine I'm not the first person to run in to this.

  Read the article

• UITabBarController's 'More' navigation controller disappears under UINavigationController

  - by lennox_19

  I am using a UITabBarController as well as a UINavigationController on my app. In my UITabBarController I am using more than 5 items so I automatically get the 'More' item. I've managed to add a saving procedure so the order of those items will be kept in case somebody changes the order etc. With 'More' active I get the More navigation controller with the 'Edit' item positioned under my UINavigationController. Both navigation controller are visible. When I click on 'Edit though the More navigation controller disappears and seem to be hiding under my UINavigationController and therefore I can't see/use the 'Done' function to save my new order What did I miss? Cheers

  Read the article

• Using Navigation Controller in a subview of View based Applicatin

  - by iphonix

  Some one please help me with this. I am developing an iPhone app and have stared with View Based Application. I have buttons on my root view screen to take user to other views with their own nibs and classes. On one of those views I need to display a table getting data from SQLite database and then display detail of the selected item depending on the selection from the table. At later stage I also need to add forms to add data. Now, how to add a Navigation Controller in that view for drill down? Can we convert a View Controller to Navigation Controller just by adding a Navigation bar at the top?

  Read the article

• asp.net mvc json 2 times post to the controller

  - by mazhar kaunain baig

  function onTestComplete(content) { var url = '<%= Url.Action("JsonTest","Organization") %>'; $.post(url, null, function(data) { alert(data["name"]); alert(data["ee"]); }); } <% using (Ajax.BeginForm("JsonTest", new AjaxOptions() { HttpMethod = "POST", OnComplete = "onTestComplete" })) { %> <%= Html.TextBox("name") %><br /> <input type="submit" /> <% } % controller:` [HttpPost] public ActionResult JsonTest() { var data = new { name = "TestName",ee="aaa" }; return Json(data); }` Due to some reason When I click on the button (My Break point is in the controller jsontest method) The jsontest is called twice(that's the real problem).I want to call it once as usual,using Ajax.BeginForm( "", new AjaxOptions { HttpMethod = "POST", OnComplete = "onTestComplete" })) I am able to call it once but it doesn't post the values to the controller.

  Read the article

• C# .NET MVC Call an action from another controller

  - by Brian

  I have two different objects: contracts, and task orders. My requirements specify that in order to view the Details for either object, the Url should be "http://.../Contract/Details" or "http://.../TaskOrder/Details" depending on which type. They are both very similar and the details pages are almost identical, so I made a class that can either be a contract or a task order, and has a variable "objectTypeID" that says which type it is. I wrote the action "Details" in the task order controller, but now I want to call that from the contract controller instead of recopying the code. So is there any way to have the url still say ".../Contract/Details" but call the action in the TaskOrder controller instead? I tried using TaskOrderController TOController = new TaskOrderController(); TOController.Details(id); This would have worked except that I can't use the HttpContext.Session anymore, which I used several times in the action.

  Read the article

• Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

  - by ffrugone

  According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

  Read the article

• ASP.NET MVC 2 RC 2 returns Area-specific controller when no area specified

  - by Bryan

  I have a basic MVC 2 (RC2) site with one base-level controller ("Home"), and one area ("Admin") with one controller ("Abstract"). When i call http://website/Abstract - the Abstract controller in the Admin area gets called even though i haven't specified the Area in the URL. To make matters worse - it doesn't seem to know it's under Admin because it can't find the associated view and just returns: The view 'Index' or its master was not found. The following locations were searched: ~/Views/Abstract/Index.aspx ~/Views/Abstract/Index.ascx ~/Views/Shared/Index.aspx ~/Views/Shared/Index.ascx Am i doing something wrong? Is this a bug? A feature?

  Read the article

• Programatically Create Controller in Rails

  - by Trey Bean

  What's the best way to dynamically create a controller in Rails. I've got a class that needs to generate a bunch of controller that inherit from it. I could just create a bunch of files in /app/controllers, but they'd all be basically empty files. There's got to be a way to generate these classes dynamically and have them treated like other controllers in Rails, e.g. reloaded correctly in dev mode. I tried putting this in a config/initializer: FL.contact_types.each do |contact_type| controller_name = "#{contact_type.pluralize}Controller" Object.const_set(controller_name.to_sym, Class.new(ContactsController)) unless Object.const_defined?(controller_name.to_sym) end This worked, but I run into the dependency/reload problem and get “A copy of AuthenticatedSystem has been removed from the module tree but is still active” since the ContactsController inherits from ApplicationController which includes AuthenticatedSystem. Is creating a bunch of empty files really the best solution?

  Read the article

• Fat ASP.NET MVC Controllers

  - by Mosh

  Hello, I have been reading about "Fat Controllers" but most of the articles out there focus on pulling the service/repository layer logic out of the controller. However, I have run into a different situation and am wondering if anyone has any ideas for improvement. I have a controller with too many actions and am wondering how I can break this down into many controllers with fewer actions. All these actions are responsible for inserting/updating/removing objects that all belong to the same aggregate. So I'm not quiet keen in having a seperate controller for each class that belongs to this aggregate... To give you more details, this controller is used in a tabbed page. Each tab represents a portion of the data for editing and all the domain model objects used here belong to the same aggregate. Any advice? Cheers, Mosh

  Read the article

• Modal View Controller with keyboard on landscape iPad changes location when dismissed

  - by Roi

  I present a modal view controller on my on my iPad with UIModalPresentationFormSheet presentation style and UIModalTransitionStyleCoverVertical transition style. The Modal View Controller contains a UIWebView with some TextFields on it. When the user taps one of the text fields the keyboard comes up. I have noticed that in landscape mode after the keyboard is shown, if I try to dismiss the modal view controller with animation the view changes its position from the center of the screen to the left side just before the animation starts.. This happens only if the keyboard is up and only in landscape mode on the iPad. If the user closes the modal view without pressing on any text field this doesn't happen. Anyone familiar with this strange behavior?

  Read the article

• Unable to forward UITouch events to my view controller

  - by hyn

  I have a UISplitViewController setup with a custom view added as a subview of the view (UILayoutContainerView) of split view controller. I am trying to forward touch events from my custom view controller to the master and detail views, but the following (which was suggested here on another thread) seems to have no effect: - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; // Do something [self.nextResponder touchesBegan:touches withEvent:event]; } (I couldn't get this formatted properly) As a result my custom view controller locks the events and all the UI underneath never has a chance to do anything. How can I get my master and detail view controllers to receive events?

  Read the article

• Codeigniter MVC controller architecture

  - by justinbach

  I'm building a site using CodeIgniter that largely consists of static content (although there will be a relatively small CMS backend, and there's code to handle localization/internationalization based on the domain used to access it). Typically, in a situation like this, I'd use a Pages controller that is in charge of rendering static content, but as there are a fair number of pages on the site (30+) it'd quickly end up containing lots of methods (assuming one per page). Should I break my Pages controller into multiple controllers (that perhaps inherit from it) according to different sections of the site? Should I organize methods differently in the Pages controller? What's the best practice here? Thanks! Justin

  Read the article

• CodeIgniter - Post multiple arrays to controller

  - by Bobe

  I have a dynamically generated form that allows users to enter new data and edit existing data. When the form is submitted, it collates the input values and groups them according to whether they are new or not, the former being denoted by class="new-entry". So the function generates two arrays: updateData and insertData. Both arrays are of similar formats: [ 0: { 'id' = 1, 'value' = foo }, 1: { 'id' = 1, 'value' = 'bar' }, etc... ] I am combining them into a new array object to send via ajax to the controller: var postData = { 'update_data': updateData, 'insert_data': insertData }; Then in the ajax call: $.post(url, postData, function() { // some code }); However, in the controller, doing print_r($this->input->post()) or print_r($_POST) as a test only returns Array(). Even $this->input->post('update_data') returns nothing. How can I retrieve these arrays in the controller?

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >