Search Results

Search found 15241 results on 610 pages for 'solaris operating environment'.

Page 62/610 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • How do I connect to the serial console port os a Sunfire 280R?

    - by DrStalker
    We have a Sunfire 280R (old SPARC/Solaris server) that is refusing to come up after being relocated. We're trying to connect to the serial console port, but all we get is random gibberish on the screen. We've tried both connecting with a DB25DB9 adapter and using a DB-25-RJ45 adapter with a cisco RJ45-DB9 adapter to a windows laptop. We're configuring the laptop to 9600 baud, 8 bit, 1 stop bit, no parity. We've tried both no flow control and Xon/Xoff. We get the same results hooking up to the serial port on a working SPARC server, so it's probably something in our setup rather than a fault with the server. How do we get access to to serial console so we can work out what is stopping this box from getting to the network? Is there a special sun adapter we need to get/make to get the serial link working?

    Read the article

  • Reading a ZFS USB drive with Mac OS X Mountain Lion

    - by Karim Berrah
    The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

    Read the article

  • exported variable not persisted after script execution

    - by Daniele
    I'm facing a wierd issue. I've a vm with solaris 11, and trying to write some bash scripts. if, on the shell, I type : export TEST=aaa and subsequently run: set I correctly see a new environment variable named TEST whose value is aaa. If, however I do basically the same thing in a script. when the script terminates, I do not see the variable set. To make a concrete example, if in a file test.sh I have: #!/usr/bin/bash echo 1: $TEST #variable not defined yet, expect to print only 1: echo 2: $USER TEST=sss echo 3: $TEST export TEST echo 4: $TEST it prints: 1: 2: daniele 3: sss 4: sss and after its execution, TEST is not set in the shell. Am I missing something? I tried both to do export TEST=sss and the separate variable set/export with no difference.

    Read the article

  • Sun T1000 Fan Noise - Big Issue

    - by Ed Austin
    Long and short, the T1000 makes more noise than 7 HP Servers combined. Firmware updated to latest version. PICL running under Solaris OK. Diagnostics all OK. It is driving us mad. We have a server room in our small office and we can hear this baby through thick concrete.... I cannot believe Sun doesn't mention how loud they are.... thought this was an environmentally friendly server.. Help really appreciated before it drives us all mad.

    Read the article

  • How to synchronize users, passwords, hosts, etc without NIS

    - by joshxdr
    I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

    Read the article

  • Extremely slow startup of tomcat

    - by Henrik
    I have a tomcat 7 installation on a Solaris 10 server. My problem is that starting the server (or deploying a new war) is extremely slow. It usually take 30 - 60 minutes. The war application is a medium sized grails application so there are quite a a lot of files. The server is running other server applications as well but from my basic skills I don't see this as a problem. Can anyone give me some tips on how to analyse this? Settings in Tomcat, java, server, disc access or something else? I use these parameters to tomcat: CATALINA_OPTS="-Dcom.sun.management.jmxremote=true -Djava.awt.headless=true -Dfile.encoding=UTF-8 -server -Xms1536m -Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=512m -XX:MaxPermSize=512m -XX:+DisableExplicitGC" And I use a 32 bit java 1.6.

    Read the article

  • Fastest OS for Java applications

    - by user33408
    Hello I have a multithreaded Java program. I am dealing with certain perfomance problems. I have improved everything. Hardware + Software. Now I think that it's time to move to proper Operating System. I was wondering, what OS is the fastest for Java Virtual machine? I am using Sun Java6. Do you think that Sun Solaris would be the best choice for Java applications? Or FreeBSD? or CentOS (I am using it currently)? Thanks

    Read the article

  • NFS compound failed for server foosrv: error 7 (RPC: Authentication error)

    - by automatthias
    I'm setting up an Ubuntu NFS server with a Solaris 10 client. The basic configuration looks okay to me, and it was also working for some time. I'm getting an "RPC: Authentication error" message on the client. server /etc/exports: /export/opencsw-future 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) /export/opencsw-current 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) $ ls -ld /export/opencsw-current drwxr-xr-x 7 maciej maciej 4096 2012-02-05 14:55 /export/opencsw-current client $ grep opencsw /etc/vfstab foosrv:/opencsw-current - /export/opencsw-current nfs - yes - $ sudo mount /export/opencsw-current NFS compound failed for server foosrv: error 7 (RPC: Authentication error) (...repeated...) nfs mount: mount: /export/opencsw-current: Permission denied My server host name resolves to both IPv4 and IPv6 addresses.

    Read the article

  • Top causes of slow ssh logins

    - by Peter Lyons
    I'd love for one of you smart and helpful folks to post a list of common causes of delays during an ssh login. Specifically, there are 2 spots where I see a range from instantaneous to multi-second delays. Between issuing the ssh command and getting a login prompt and between entering the passphrase and having the shell load Now, specifically I'm looking at ssh details only here. Obviously network latency, speed of the hardware and OSes involved, complex login scripts, etc can cause delays. For context I ssh to a vast multitude of linux distributions and some Solaris hosts using mostly Ubuntu, CentOS, and MacOS X as my client systems. Almost all of the time, the ssh server configuration is unchanged from the OS's default settings. What ssh server configurations should I be interested in? Are there OS/kernel parameters that can be tuned? Login shell tricks? Etc?

    Read the article

  • How can you deploy with juju multiple times the same application within the same environment? [closed]

    - by Pere Hospital
    Possible Duplicate: How do I deploy multiple stacks in an environment? If trying to deploy two times wordpress i.e. in the same environment you get: 2012-12-19 16:56:54,588 INFO Searching for charm cs:precise/wordpress in charm store 2012-12-19 16:56:55,472 INFO Connecting to environment... 2012-12-19 16:57:01,044 INFO Connected to environment. 2012-12-19 16:57:01,374 INFO Using cached charm version of wordpress 2012-12-19 16:57:01,857 ERROR Service name 'wordpress' is already in use This would apply for a situation where you want to deploy multiple wordpress blogs using the same env (i.e. same amazon account).

    Read the article

  • to understand the code- how the heap is written in process migration in solaris

    - by akshay
    hi guys i need help understanding what this piece of code actually does as it is a part of my project i am stuck here. the code is from libckpt on solaris. /********************************** * function: write_heap * args: map_fd -- file descriptor for map file * data_fd -- file descriptor for data file * returns: no. of chunks written on success, -1 on failure * side effects: writes all included segments of the heap to ckpt files * misc.: If we are forking and copyonwrite is set, we will write the heap from bottom to top, moving the brk pointer up each time so that we don't get a page copied if the * called from: take_ckpt() ***********************************/ static int write_heap(int map_fd, int data_fd) { Dlist curptr, endptr; int no_chunks=0, pn; long size; caddr_t stop, addr; if(ckptflags.incremental){ /-- incremental checkpointing on? --/ endptr = ckptglobals.inc_list-main-flink; /*-- for each included chunk of the heap --*/ for(curptr = ckptglobals.inc_list->main->blink->blink; curptr != endptr; curptr = curptr->blink){ /*-- write out the last page in the included chunk --*/ stop = curptr->addr; pn = ((long)curptr->stop - (long)sys.DATASTART) / PAGESIZE; if(isdirty(pn)){ addr = (caddr_t)max((long)curptr->addr, (long)((pn * PAGESIZE) + sys.DATASTART)); size = (long)curptr->stop - (long)addr; debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x, pn = %d\n", addr, addr+size, pn); if(write_chunk(addr, size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } /*-- write out all the whole pages in the middle of the chunk --*/ for(pn--; pn * PAGESIZE + sys.DATASTART >= stop; pn--){ if(isdirty(pn)){ addr = (caddr_t)((pn * PAGESIZE) + sys.DATASTART); debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x, pn = %d\n", addr, addr+PAGESIZE, pn); if(write_chunk(addr, PAGESIZE, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } /*-- write out the first page in the included chunk --*/ addr = curptr->addr; size = ((pn+1) * PAGESIZE + sys.DATASTART) - addr; if(size > 0 && (isdirty(pn))){ debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x\n", addr, addr+size); if(write_chunk(addr, size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } } else{ /-- incremental checkpointing off! --/ endptr = ckptglobals.inc_list-main-blink; /*-- for each included chunk of the heap --*/ for(curptr = ckptglobals.inc_list->main->flink->flink; curptr != endptr; curptr = curptr->flink){ debug(stderr, "DEBUG: saving memory from 0x%x to 0x%x\n", curptr->addr, curptr->addr+curptr->size); if(write_chunk(curptr->addr, curptr->size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } return no_chunks; }

    Read the article

  • Overcoming the 1024 character limit with setx

    - by Madhur Ahuja
    I am trying to set environment variables using the setx command, such as follows setx PATH "f:\common tools\git\bin;f:\common tools\python\app;f:\common tools\python\app\scripts;f:\common tools\ruby\bin;f:\masm32\bin;F:\Borland\BCC55\Bin;%PATH%" However, I get the following error if the value is more then 1024 characters long: WARNING: The data being saved is truncated to 1024 characters. SUCCESS: Specified value was saved. But some of the paths in the end are not saved in variable, I guess due to character limit as the error suggests.

    Read the article

  • How to tell rails to use non-default ruby?

    - by Hamish Downer
    I need two different versions of ruby on a server. The packaged ruby for the packaged puppet to work, and a compiled ruby for a rails web app to work. So basically I want the default ruby to be the ruby from the package, and for rails to use the compiled ruby (in /usr/local/bin/ and /usr/local/lib/ ) I've found references to setting the RUBYPATH and RUBYLIB environment variables, but I'm confused as to where to set them. In .bashrc, .profile, in the apache config somewhere?

    Read the article

  • Running shortcut from command prompt without the .lnk extension (Windows)

    - by Abbas
    I have created a folder (d:\shortcuts), created shortcuts for most applications in this folder and appended the folder path to the Path environment variable. Now all my applications are available from run and command window without messing around with Path. However, I now have to type the name of the shortcut as well as extension (e.g. vlc.lnk) to invoke it. Is there any way to do this without typing the extension?

    Read the article

  • How do I reset my PYTHONPATH?

    - by Underyx
    Somehow my PYTHONPATH environment variable got emptied, and now I can't import some downloaded modules. I've tried running the following command to reinstall all Python packages, but it didn't set the variable back to its original value: dpkg-query -W -f '${package}\n' | grep python | xargs -I % sudo apt-get install % --reinstall How do I reinstall the packages so that this gets sorted out? The (Vagrant) box is running Ubuntu 12.04.

    Read the article

  • Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

    - by Pascal
    Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

    Read the article

  • Java Classpath Problems in Ubuntu

    - by Travis
    First off I'm running Ubuntu 9.10 I've edited the /etc/environment file to look like this: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" JAVA_HOME="/usr/lib/jvm/java-6-sun-1.6.0.20" CLASSPATH="/home/travis/freetts/lib/freetts.jar:/home/travis/freetts/lib/jsapi.jar:." I then run "source /etc/environment" to make sure the changes are included. Then I try compiling my simple test program using this: javac Test.java It throws out a few errors, but when I compile like this: javac -cp /home/travis/freetts/lib/freetts.jar:/home/travis/freetts/lib/jsapi.jar:. Test.java It works just fine, this leads me to believe that for some reason javac isn't seeing the CLASSPATH environment variable? I can echo it and everything in the terminal: echo $CLASSPATH gives me what I put in. Any help on this would be greatly appreciated.

    Read the article

  • How to use Mahout in a Windows environment?

    - by oopdemo
    I am trying to use Mahout in an application running on Windows. I want to build clusters from a lucene index using k-means. As soon as I have to create sequence files (creating vectors from a lucene index), I get a Hadoop-Exception, since Hadoop makes command line calls to programs unknown in a Windows environment (e.g. chmod). Running in Cygwin is not an option, since I want to be able to run the App from eclipse. So my question is is there a way to avoid having to create sequence files to retrieve my vectors from a lucene index? or is there a way to create sequence files in a Windows environment?

    Read the article

  • Anyone use Distributed VCS in a corporate environment?

    - by Eddie Parker
    I'm curious to hear about people's experiences with distributed version control in a corporate environment. Specifically: Was it difficult to gain adoption? Now that it's in place, is it well liked? What 'model' are you using (hub & spoke? Something else?) Allowing you use hub & spoke, are there any discipline problems with pushing to a central server? I'd like to hear if anyone has non-programmers working within this environment, preferably artists and the like to whom VCS can be a bit daunting. Did it work out for them?

    Read the article

  • What's the best way to check that environment variables are set in Unix shellscript

    - by AndrewR
    I've got a few Unix shell scripts where I need to check that certain environment variables are set before I start doing stuff, so I do this sort of thing: if [ -z "$STATE" ]; then echo "Need to set STATE" exit 1 fi if [ -z "$DEST" ]; then echo "Need to set DEST" exit 1 fi which is a lot of typing. Is there a more elegant idiom for checking that a set of environment variables is set? EDIT: I should mention that these variables have no meaningful default value - the script should error out if any are unset.

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >