Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 62/260 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

• How can one create a bootable linux usb key that works on Mac (Intel 64 bit CPU) hardware ?

  - by user3621

  Hi, I'm trying to create a bootable usb key with linux (debian) and that can be booted on Macintel hardware. I have read that MAC's EFI can only boot GPT GUID formatted disks. I'm desperately trying to find a good tutorial which explains how to create such a key. Here what I have done so far: create a GUID partition on te key using linux GNU parted create a HFS+ or ext3 partition on the key, with the boot flag on install a linux .iso with unetbootin While all steps were successfull and in some cases I could even boot on a PC, the step of booting on Macintel software failed (on a macbook). I need to precise that I holded the "alt" key while booting the mac and the only visible bootable disk was the hard disk. Thanks for any advice. PS: I have tried with rEFIt as well. In one case I had a "windows" icon but it then failed to boot with a message like "no system found"

  Read the article

• Do not get 'Safely remove' option in Tray for USB storage devices.

  - by blitzkriegz

  I had done some tweaks in service settings (Disabled some as I thought it is not needed). Now, I am not getting the option to safely remove mass storage device when I click the icon on the system tray. I tried enabling some of the services, but it didn't help. Moreover I'm not very sure if this anomaly is because of my changes in services. Any idea how to make those 'safely remove' options appear when I click the USB icon on the tray. Right now nothing is happening when I click.

  Read the article

• USB-based AV application that restores compromised Windows files from CD/DVD?

  - by overtherainbow

  Hello I just tried a couple of rescue disks (AVG and Kaspersky), and I was wondering if someone knew of a solution that would work like this: The AV solution boots from a USB key, and works entirely from RAM (where the latest virus DB is downloaded) The user inserts his Windows CD/DVD in the drive If any Windows file is compromised, the AV application fetches a clean version from the CD/DVD and restores it on the hard drive optionally, any compromised drive/user-land application is quarantied, and it is up to the user to reinstall those after he successfully rebooted into a restored Windows setup Have you heard of a solution like this? It seems silly to reinstall a whole Windows computer just because one or a few system files were compromised. Thank you.

  Read the article

• How do you interface with a USB to Parallel adapter?

  - by Hans

  I'm currently doing a project where I have to interact with a circuit I made through the parallel port of a computer. However, my computer doesn't have a parallel port so I borrowed a Parallel to USB adapter cable. The cable didn't come with any drivers, but it's recognized by the device manager as a "USB Printing Support" controller, under the USB section. It seems that old parallel printers can be plugged in and work properly without any problems. So my question is, if I write a program in Java that tries to interact with a parallel port directly, will it work? And if not, can anyone give me some pointers as to what I need to do to interact with it? Thanks.

  Read the article

• How can I use Java to communicate to device through USB port?

  - by Bopha

  I just recently learn Java and try to communicate to the device through USB port connection. I've have used C# with OpenNETCF which allows me to send file and retrieve file on the device through USB port; how can I achieve this with java? I seearch on stackoverflow thread, http://stackoverflow.com/questions/544507/how-to-communicate-with-a-usb-device-under-windows-and-java, the comment made by christoffer is to hack the native code, but I don't quite which native code api that he referred to. RAPI, maybe?

  Read the article

• How to generate a video signal from Android device via USB?

  - by C.Rivlaldo

  Is it possible to create an application for Android, which can generate a video signal (HDMI or VGA) via USB? Any Android device has miniUSB port. Theoretically it's possible to create a small commutator device on microcontroller or microscheme, which will be a USB-host for Android device. You'll connect Android device with commutator and then connect commutator with monitor. For example, the scheme looks like: Android phone - commutator (USB-host) - TV/Monitor. Summary, I need to connect android phone with TV via miniUSB port. I found soft which can use miniUSB - HDMI cable, but those apps only for Motorolla Droid and HTC Evo. I'll glad to get links to existing apps or projects on that theme, to info about software generation HDMI-signal and connecting Android devices with another devices. Thank you and sorry for my bad english!

  Read the article

• External 1TB WD USB 3.0 HDD is not detecting. Working perfectly find in Windows

  - by Yathi

  My 1TB USB 3.0 was working fine earlier in Ubuntu as well as Windows. But lately it is not at all being detected in Ubuntu. It still works fine in Windows. I did update my Ubuntu to 12.10 but I am not sure if that caused the issue. When I connect my HDD and run dmesg | tail: [ 47.804676] usb 4-3: >Device not responding to set address. [ 48.008575] usb 4-3: >Device not responding to set address. [ 48.212421] usb 4-3: >device not accepting address 9, error -71 [ 48.324451] usb 4-3: >Device not responding to set address. [ 48.528340] usb 4-3: >Device not responding to set address. [ 48.732165] usb 4-3: >device not accepting address 10, error -71 [ 48.844138] usb 4-3: >Device not responding to set address. [ 49.048179] usb 4-3: >Device not responding to set address. [ 49.251881] usb 4-3: >device not accepting address 11, error -71 [ 49.251907] hub 4-0:1.0: >unable to enumerate USB device on port 3 The output of sudo fdisk -l is : Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030cde Device Boot Start End Blocks Id System /dev/sda1 2048 1332981759 666489856 83 Linux /dev/sda2 1332981760 1953523711 310270976 5 Extended /dev/sda5 1332983808 1349365759 8190976 82 Linux swap / Solaris /dev/sda6 1349367808 1953523711 302077952 7 HPFS/NTFS/exFAT Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a2519 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 103368703 51683328 7 HPFS/NTFS/exFAT /dev/sdb2 103368704 154568703 25600000 83 Linux /dev/sdb3 154568704 234440703 39936000 7 HPFS/NTFS/exFAT /dev/sda and /dev/sdb are my 2 internal HDDs. But the external one which should be /dev/sdc is not even being shown though it is connected and the LED on the HDD is glowing. Someone had suggested adding blacklist uas to /etc/modprobe.d/blacklist.conf. Tried that as well. But still not working. Can someone help me out.

  Read the article

• vCenter appliance won't use mail relay server

  - by Safado

  tl;dr: - sendmail is configured to use a relay server but still insists on using 127.0.01 as the relay, which results in mail not being sent. We have the open source vCenter appliance (v 5.0) managing our ESXi cluster. When connected to it via vSphere Client, you can configure the SMTP relay server to use by going to Administration > vCenter Server Settings > MAIL. There you can set the SMTP Server value. I looked through their documentation and also confirmed on the phone with support that all you have to do to configure mail is to put in the relay IP or fqdn in that box and hit OK. Well, I had done that and mail still wasn't sending. So I SSH into the server (which is SuSE) and look at /var/log/mail and it looks like it's trying to relay the email through 127.0.0.1 and it's rejecting it. So looking through the config files, I see there's /etc/sendmail.cf and /etc/mail/submit.cf. You can configure items in /etc/sysconfig/sendmail and run SuSEconfig --module sendmail to generate those to .cf files based on what's in /etc/sysconfig/sendmail. So playing around, I see that when you set the SMTP Server value in the vCenter gui, all that it does is change the "DS" line in /etc/mail/submit.cf to have DS[myrelayserver.com]. Looking on the internet, it would appear that the DS line is really the only thing you need to change in order to use a relay server. I got on the phone with VMWare support and spent 2 hours trying to modify ANY setting that had anything to do with relays and we couldn't get it to NOT use 127.0.0.1 as the relay. Just to note, any time we made any sort of configuration change, we restarted the sendmail service. Does anyone know whats going on? Have any ideas on how I can fix this?

  Read the article

• Problems configuring an SSH tunnel to a Nexentastor appliance for use with headless Crashplan

  - by Rob Smallshire

  Problem I am attempting to configure an SSH tunnel to a NexentaStor appliance from either a Windows or Linux computer so that I can connect a Crashplan Desktop GUI to a headless Crashplan server running on the Nexenta box, according to these instructions on the Crashplan support site: Connect to a Headless CrashPlan Desktop. So far, I've failed to get a working SSH tunnel from from either either a Windows client (using Putty) or a Linux client (using command line SSH). I'm fairly sure the problem is at the receiving end with NexentaStor. A blog article - CrashPlan for Backup on Nexenta - indicates that it could be made to work only after "after enabling TCP forwarding in Nexenta in /etc/ssh/sshd_config" - although I'm not sure how to go about that or specifically what I need to do. Things I have tried Ensuring the Crashplan server on the Nexenta box is listening on port 4243 $ netstat -na | grep LISTEN | grep 42 127.0.0.1.4243 *.* 0 0 131072 0 LISTEN *.4242 *.* 0 0 65928 0 LISTEN Establishing a tunnel from a Linux host: $ ssh -L 4200:localhost:4243 admin:10.0.0.56 and then, from another terminal on the Linux host, using telnet to verify the tunnel: $ telnet localhost 4200 Trying ::1... Connected to localhost. Escape character is #^]'. with nothing more, although the Crashplan server should respond with something. From Windows, using PuTTY have followed the instructions on the Crashplan support site to establish an equivalent tunnel, but then telnet on Windows gives me no response at all and the Crashplan GUI can't connect either. The PuTTY log for the tunnelled connection shows reasonable output: ... 2011-11-18 21:09:57 Opened channel for session 2011-11-18 21:09:57 Local port 4200 forwarding to localhost:4243 2011-11-18 21:09:57 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2011-11-18 21:09:57 Started a shell/command 2011-11-18 21:10:09 Opening forwarded connection to localhost:4243 but the telnet localhost 4200 command from Windows does nothing at all - it just waits with a blank terminal. On the NexentaStor server I've examined the /etc/ssh/sshd_config file and everything seems 'normal' - and I've commented out the ListenAddress entries to ensure that I'm listening on all interfaces. How can I establish a tunnel, and how can I verify that it is working?

  Read the article

• Trouble setting up incoming VPN in Microsoft SBS 2008 through a Cisco ASA 5505 appliance

  - by Nils

  I have replaced an aging firewall (custom setup using Linux) with a Cisco ASA 5505 appliance for our network. It's a very simple setup with around 10 workstations and a single Small Business Server 2008. Setting up incoming ports for SMTP, HTTPS, remote desktop etc. to the SBS went fine - they are working like they should. However, I have not succeeded in allowing incoming VPN connections. The clients trying to connect (running Windows 7) are stuck with the "Verifying username and password..." dialog before getting an error message 30 seconds later. We have a single external, static IP, so I cannot set up the VPN connection on another IP address. I have forwarded TCP port 1723 the same way as I did for SMTP and the others, by adding a static NAT route translating traffic from the SBS server on port 1723 to the outside interface. In addition, I set up an access rule allowing all GRE packets (src any, dst any). I have figured that I must somehow forward incoming GRE packets to the SBS server, but this is where I am stuck. I am using ADSM to configure the 5505 (not console). Any help is very much appreciated!

  Read the article

• How to safely remove a USB device from 2008 Core server?

  - by Qwerty

  I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

  Read the article

• Will Parallel-port dongle work on USB-to-Parallel Adapter?

  - by Gary M. Mugford

  We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

  Read the article

• How do I remove a USB drive's write protection?

  - by nate

  I have a SanDisk Cruser Blade USB stick that suddenly seems to be write protected. I tried running DiskPart but after I write the command "attributes disk clear readonly" it displays this: Microsoft DiskPart version 5.1.3565 ADD - Add a mirror to a simple volume. ACTIVE - Marks the current basic partition as an active boot partition. ASSIGN - Assign a drive letter or mount point to the selected volume. BREAK - Break a mirror set. CLEAN - Clear the configuration information, or all information, off the disk. CONVERT - Converts between different disk formats. CREATE - Create a volume or partition. DELETE - Delete an object. DETAIL - Provide details about an object. EXIT - Exit DiskPart EXTEND - Extend a volume. HELP - Prints a list of commands. IMPORT - Imports a disk group. LIST - Prints out a list of objects. INACTIVE - Marks the current basic partition as an inactive partition. ONLINE - Online a disk that is currently marked as offline. REM - Does nothing. Used to comment scripts. REMOVE - Remove a drive letter or mount point assignment. REPAIR - Repair a RAID-5 volume. RESCAN - Rescan the computer looking for disks and volumes. RETAIN - Place a retainer partition under a simple volume. SELECT - Move the focus to an object. It's like when you type help at the DiskPart prompt, so how do I get past this? This problem started when I plugged the stick into a laptop which had viruses, if that's any help.

  Read the article

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• Does anyone know where I could find a 2 input USB voltage meter?

  - by John O

  What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

  Read the article

• Gparted resize of an extended partition fails with error "can't have overlapping partitions".

  - by Marcus

  I just decided to install Ubuntu 12.04 alongside Windows 7 on my Dell laptop. However I didn't do this manually but instead used the "Install Ubuntu alongside Windows 7" option during the installation. Now the partition that Ubuntu runs in has very little space and I am getting warning messages. I'm trying to use gparted 0.12.1-5 (via a live CD) to give Windows less space and give Ubuntu more. I've managed to remove 100GB from the Windows partition so I now have some unallocated space between Windows and Ubuntu. This is what it looks like inside Ubuntu (not using the live CD, since it won't let me mount a USB to save a screenshot): So first I take sda4 (extended?) and resize it to the left so it takes up all the unallocated space. Then I resize sda5 (ext4) as well so it takes up all the new space. However, when I hit apply, it fails on the first action (resizing sd4) with the error message can't have overlapping partitions. Any ideas as to why this happens? I also tried resizing sda4 by just a few MB so that it definitely didn't overlap anything, but I still got the same error message. To clarify, I am using gparted from the LiveCD, I just took the screenshot from Ubuntu. I couldn't attach the details file containing the error information from gparted because I can't mount a USB drive when I'm running from the LiveCD. I'm tried following the guide on the gparted website but it says Invalid argument or something like that. If the gparted details are needed, I may need some hints on how to solve the USB issue as well. :)

  Read the article

• Resizing partition using Gparted gives "can't have overlapping partitions" error

  - by Marcus

  I just decided to install Ubuntu 12.04 alongside Windows 7 on my Dell laptop. However I didn't do this manually but instead used the "Run Ubuntu alongside Windows 7" option upon installation, and now the partition that Ubuntu runs on has very little space (It's giving me warnings). I'm trying to use Gparted 0.12.1-5 (via a live CD) to give Windows less space and give Ubuntu more. I've managed to remove 100GB from the Windows partition so I now have some unallocated space between Windows and Ubuntu. This is what it looks like inside Ubuntu (not using the live CD, since it won't let me mount a USB to save a screenshot): http://i.stack.imgur.com/0keQq.png So first I take sda4 (extended?) and resize it to the left so it takes up all the unallocated space. Then I resize sda5 (ext4) as well so it takes up all the new space. However, when I hit apply, it fails on the first action (resizing sd4), saying "can't have overlapping partitions". Any ideas as to why this happens? I also tried resizing sda4 by just a few MB so that it definitely didn't overlap anything, but I still got the same error message. To clarify, I am doing it using the CD, I just took the screenshot from Ubuntu. Any help would be greatly appreciated! And again, I can't mount any USB (I'm following the guide on the gparted website but it says "Invalid argument" or something like that) so I couldn't attach the details file from Gparted. If this is needed, I may need some hints on how to solve the USB issue as well. :) Thanks

  Read the article

• New Dell Vostro 3550 will not boot into Live CD

  - by rich97

  I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

  Read the article

• print jobs are held until the VirtualBox guest OS is reboot

  - by broiyan

  Here is the setup: VirtualBox 4.1.20 (which the Help window describes as 4.1.12_Ubuntu) Extension Pack 4.1.20 (for USB support) Windows 7 Home Premium as a guest operating system on VirtualBox Ubuntu 12.04 with dist-upgrade's to September 2012 as the host operating system. Fuji Xerox DocuPrint P205b, which I believe is a GDI printer, connected via USB. The problem is that often print jobs will sit in the print queue and nothing comes out of the printer. The printer status for the first item in the queue will be Printing even though nothing happens. Then upon rebooting Windows, the print jobs get printed, seemingly simultaneous to the rebooting process; that is as Windows reloads. One way to avoid this problem is to reboot Windows with the printer cable attached, and then submit the print jobs. The print jobs get printed in a timely manner. Perhaps VirtualBox has a problem with USB being plug-n-play and hot pluggable. It's not convenient to have the printer plugged in when Windows boots because: One, this is a laptop, and Two, I may be boot Windows for a purpose other than printing and not anticipate needing to print. Are there any recommendable fixes for this problem?

  Read the article

• Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

  - by 5th Wheel

  The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

  Read the article

• Photo transfer problems from camera

  - by warkior

  We have a digital camera (Cannon SX130 IS) which we often connect to the Ubuntu 12.10 desktop via USB in order to download the images. In past flavours of Linux (Mint 12 was most recent) it worked fine, however since upgrading to Ubuntu 12.10, the process fails after downloading a small number of the images. I can view the images which will be transferred in the preview window, and I can browse the camera file system to download the images manually, but if I just drag/drop the images over from camera to desktop, it freezes after 5-6 are copied over. I've been able to get around the problem by only copying 3-4 at a time, but when you have 100+ images to transfer, that gets really frustrating. Any advice on where I could start looking for answers, or how I could diagnose the source of the problem further? We have also had some issues with WireLess USB mice though it may not be related. I'm hoping my USB controller in the computer isn't dying... it's not that old. Also, it seems to work much better under Windows.

  Read the article

• Step 2 of instructions is not clear to me

  - by Albert Frye

  I want to make a bootable USB stick. I run the UUI. I see the instructions on this site: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows Step 1 says: Select "Ubuntu Desktop Edition" from the dropdown list Okay, so the actual title of the drop down box is: Select a "Linux Distribution" from the dropdown to put on your USB I am pretty new to computers. 67 years old. Live alone. Bought my first computer 3 months ago. So I will have to assume that when the instructions say "Ubuntu Desktop Edition", that means the same thing as "Linux Distribution". Okay, No big leap there. So far, so good . . . . . . . So I pick the very first selection: Ubuntu 13.10 Desktop i386 I'm not sure why there are so many choices, but I'm guessing I'm pretty safe with the first one. It's for a Toshiba Satellite laptop 64 bit Windows 7. Okay, now for step 2: The instructions say: Click 'Browse' and open the downloaded ISO file. The message in the window just before the "Browse" button says: Browse to your ubuntu-13.10*desktop*i386.iso -- Okay, so where's that file? So I click "Browse" and start looking for that file. It is nowhere to be found. So where the heck is it?

  Read the article

• Run script when a specific disk/memory card is mounted under OSX

  - by Max Rydahl Andersen

  How do I run a script when a drive is mounted under OSX ? My usecase is that I would like to automatically copy images from my USB memory/harddrive when it is inserted in my USB card reader, and when a DVD or CD is inserted I would like to copy it for storage in my media center. I've tried using Marcopolo but from what I can see it can only detect the presence of a certain USB device, not the presence of specific harddrive. (http://superuser.com/questions/65127/is-it-possible-to-run-an-automator-workflow-when-a-usb-device-is-connected)

  Read the article

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >