Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 63/260 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• apcupsd on Linux does not report on APC BackUPS Pro 900

  - by lserni

  From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

  Read the article

• MKV video suddenly stops playing after random time - what could this be?

  - by MEM

  I have this HP USB drive (16GB, NTFS formatted) that has, a MKV video. The USB is always detectable, so is the MKV, but when I connect that USB drive with that MKV video on my HT-C5530 home cinema USB port, the playback just suddenly stops after random time, and it returns to the main menu when I can see the pen and it's contents. I really have no clue about what could be the issue here, has someone else experience something similar? That may help me out on this.

  Read the article

• Linux Live USB Media

  <b>Jamie's Random Musings:</b> "It is pretty common these days for laptops, and even desktops, to be able to boot from a USB flash memory drive. So you can save a little time and a little money by converting various Linux distributions ISO images to bootable USB devices, rather than burning them to CD/DVD."

  Read the article

• No Option To Duel Boot Ubuntu 12.04 USB

  - by Jordan

  I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

  Read the article

• Kernel panic on boot up with 13.10 live-USB

  - by Muhammad Emad

  I am a new user for Ubuntu. I downloaded 13.10 yesterday and made a bootable USB with universal USB installer on my Lenovo IdeaPad Z580 laptop which is now using UEFI; everything appeared OK. When I booted from the LiveUSB I got the choices of trying or installing Ubuntu but both of them keep giving me these error: [ 1.929082] kernel panic-not syncing vfs unable to mount root fs on unknown-block (0.0) Please tell me what is going wrong?

  Read the article

• Cant burn the iso file on disc and usb will not startup

  - by Jason

  I am having very big problems trying to get this going for my old laptop. I tried burning the iso image with 5 different iso burning programs and none of the disks worked none started up. Then I tried to do the USB way used the program that puts it on the usb for you it starts up on my laptop fine but will not start up on my compaq presario 2178cl. If any1 can help me with this problem I would be much appreciative ty for your time.

  Read the article

• Should I be running VM's(Virtual Box) for development on the same hdd as my os or a external usb (2.0) HDD or usb (2.0) flash drive

  - by J. Brown

  I have a mac book pro (7200 rpm / 8GB ram) and I like the idea of virtualized development environments as I like to experiment with different technologies and don't like to have environmental cross contamination. I would like to know for the vm's I run (rarely 2 at time..almost always 1 vm at a time) should the virtual hdd be on my laptops native hdd or some external form (usb hdd, usb flash, or since i have mac express card based sad ?). I don't mind maxing out my ram to 16GB if thats a better option to have in the mix. Thank you

  Read the article

• 13.04 Ringtail USB installation overwrote my username

  - by barnhillec

  I had to use an .iso USB to upgrade from 12.10 to 13.04 Ringtail. Great results, except the USB stick install app asked me to provide an identity so I provided the same one I used for 12.10 . Unfortunately it overwrote my other identity with a fresh one, so now I have no ownership of all my previous profiles, etc. A dumb mistake, but is there a way to take ownership of my previous user identity and merge it with the current?

  Read the article

• Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

  - by Mike C

  I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

  Read the article

• Simple NAT router for ESX

  - by Evan M.

  Hi Guys, I'm looking for a simple virtual appliance that I can deploy to my ESX environment to use as a virtual NAT router / firewall to create an isolated network that I can easily give internet access too. Basic setup: ESX Host, has 2 vswitches configured: 1 is connected to the physical LAN, the other is isolated. I need an appliance that I can add 2 vNICs to, and attach one to the isolated vSwitch, the other to the LAN, to give the isolated network outbound access (so it can reach the internet). Anyone have an appliance that I can setup quickly to do so? Thanks.

  Read the article

• Is there a way to communicate with USB devices on Android?

  - by Dan Sosedoff

  Hello folks, I have a really short question: Is it possible to communicate/use USB devices on Android OS? I assume it might be tablet device. Lest say i want to connect some sort of USB card scanner to android tablet. Will it work? Do i need to write drivers by myself? Thanks.

  Read the article

• Can Android OS be programmed to interface with a external device via the mini-USB port?

  - by user322865

  Basic example, if I bought a chipset with a light socket and bulb soldered to the chipset; then put a USB cable with the mini-USB plug on the end to get plugged into the android phone. Can I write a Java application to turn on/off the light, get the status of the light(on/off) and maybe power a super-small led/bulb with power from the phone itself? Any insight at all would be greatly appreciated. Thank you

  Read the article

• How to communicate with a USB device under Windows and Java?

  - by Gili

  I'd like to communicate with a USB device under Windows and Java but I can't find a good library to do so. I don't want the user to have to install any extra hardware or device drivers to make this work. That is, I want to be able to interact with USB just like other Windows applications do. I am familiar with jUSB and JSR 80 but both seem to be dead projects (at least for Windows).

  Read the article

• Internet doesn't work by default

  - by Adam Martinez

  After upgrading to Precise, I am required to run 'sudo dhclient eth0' in a terminal in order to get the internet to work. Everything worked perfectly fine on Oneiric, so It's really puzzling me. I'm thinking it could possibly be something with the kernel, but who knows. Output of dmesg: [ 0.247891] system 00:01: [io 0x0290-0x030f] has been reserved [ 0.247896] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.247901] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.247908] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247931] pnp 00:02: [dma 4] [ 0.247935] pnp 00:02: [io 0x0000-0x000f] [ 0.247939] pnp 00:02: [io 0x0080-0x0090] [ 0.247943] pnp 00:02: [io 0x0094-0x009f] [ 0.247947] pnp 00:02: [io 0x00c0-0x00df] [ 0.248033] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.248125] pnp 00:03: [io 0x0070-0x0073] [ 0.248187] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248205] pnp 00:04: [io 0x0061] [ 0.248260] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.248277] pnp 00:05: [io 0x00f0-0x00ff] [ 0.248292] pnp 00:05: [irq 13] [ 0.248348] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.248583] pnp 00:06: [io 0x03f0-0x03f5] [ 0.248588] pnp 00:06: [io 0x03f7] [ 0.248597] pnp 00:06: [irq 6] [ 0.248601] pnp 00:06: [dma 2] [ 0.248690] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.248998] pnp 00:07: [io 0x03f8-0x03ff] [ 0.249008] pnp 00:07: [irq 4] [ 0.249122] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.249479] pnp 00:08: [io 0x0400-0x04bf] [ 0.249584] system 00:08: [io 0x0400-0x04bf] has been reserved [ 0.249591] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249628] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.249690] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.250049] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.250167] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.250173] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.250302] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.250307] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] [ 0.250311] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.250316] pnp 00:0b: [mem 0x0000046e-0x0000056d] [ 0.250320] pnp 00:0b: [mem 0x7fee0000-0x7fefffff] [ 0.250324] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.250328] pnp 00:0b: [mem 0x00100000-0x7fedffff] [ 0.250332] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.250336] pnp 00:0b: [mem 0xfed14000-0xfed1dfff] [ 0.250341] pnp 00:0b: [mem 0xfed20000-0xfed9ffff] [ 0.250345] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.250349] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.250353] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.250357] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.250409] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.250419] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.250430] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.250524] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.250530] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved [ 0.250536] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.250541] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved [ 0.250547] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.250552] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved [ 0.250558] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.250563] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.250568] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.250574] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.250579] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.250585] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.250590] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.250596] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.250614] pnp: PnP ACPI: found 12 devices [ 0.250617] ACPI: ACPI bus type pnp unregistered [ 0.250624] PnPBIOS: Disabled by ACPI PNP [ 0.288725] PCI: max bus depth: 1 pci_try_num: 2 [ 0.288786] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref] [ 0.288792] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.288797] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.288804] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.288811] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.288820] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.288825] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.288833] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.288840] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.288851] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.288856] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.288861] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.288869] pci 0000:00:1c.4: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.288876] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.288887] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.288891] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.288897] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 0.288904] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.288911] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.288920] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.288926] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.288933] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.288940] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.288971] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288979] pci 0000:00:01.0: setting latency timer to 64 [ 0.288991] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288998] pci 0000:00:1c.0: setting latency timer to 64 [ 0.289008] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.289014] pci 0000:00:1c.4: setting latency timer to 64 [ 0.289030] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.289037] pci 0000:00:1c.5: setting latency timer to 64 [ 0.289047] pci 0000:00:1e.0: setting latency timer to 64 [ 0.289054] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.289058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.289063] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289067] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289072] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289077] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.289081] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.289086] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.289092] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.289096] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.289101] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.289106] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.289110] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.289115] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.289120] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.289124] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.289129] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.289134] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.289138] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.289143] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.289148] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.289152] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.289157] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289161] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289166] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289233] NET: Registered protocol family 2 [ 0.289360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.289754] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.290670] TCP: Hash tables configured (established 131072 bind 65536) [ 0.290674] TCP reno registered [ 0.290680] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.290703] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.290868] NET: Registered protocol family 1 [ 0.290911] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290932] pci 0000:00:1a.0: PCI INT A disabled [ 0.290956] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.290975] pci 0000:00:1a.1: PCI INT B disabled [ 0.290992] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.291012] pci 0000:00:1a.2: PCI INT D disabled [ 0.291031] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291068] pci 0000:00:1a.7: PCI INT C disabled [ 0.291104] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291123] pci 0000:00:1d.0: PCI INT A disabled [ 0.291135] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.291155] pci 0000:00:1d.1: PCI INT B disabled [ 0.291166] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291185] pci 0000:00:1d.2: PCI INT C disabled [ 0.291198] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291219] pci 0000:00:1d.7: PCI INT A disabled [ 0.291258] pci 0000:01:00.0: Boot video device [ 0.291273] PCI: CLS 4 bytes, default 64 [ 0.291857] audit: initializing netlink socket (disabled) [ 0.291876] type=2000 audit(1336753420.284:1): initialized [ 0.337724] highmem bounce pool size: 64 pages [ 0.337734] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349241] VFS: Disk quotas dquot_6.5.2 [ 0.349365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.350418] fuse init (API version 7.17) [ 0.350611] msgmni has been set to 1685 [ 0.351179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.351229] io scheduler noop registered [ 0.351233] io scheduler deadline registered [ 0.351247] io scheduler cfq registered (default) [ 0.351450] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.351502] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.351585] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.351639] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.351728] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.351779] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.351875] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.351927] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.352094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.352143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.352311] intel_idle: MWAIT substates: 0x22220 [ 0.352315] intel_idle: does not run on family 6 model 23 [ 0.352446] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.352455] ACPI: Power Button [PWRB] [ 0.352556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.352562] ACPI: Power Button [PWRF] [ 0.352650] ACPI: Fan [FAN] (on) [ 0.355667] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.355673] ACPI: Thermal Zone [THRM] (26 C) [ 0.355750] ERST: Table is not found! [ 0.355753] GHES: HEST is not enabled! [ 0.355898] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.376332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.376582] isapnp: Scanning for PnP cards... [ 0.709133] Freeing initrd memory: 13792k freed [ 0.729743] isapnp: No Plug & Play device found [ 0.816786] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832385] Linux agpgart interface v0.103 [ 0.835605] brd: module loaded [ 0.837138] loop: module loaded [ 0.837452] ata_piix 0000:00:1f.2: version 2.13 [ 0.837473] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.837480] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.837546] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.838099] scsi0 : ata_piix [ 0.838253] scsi1 : ata_piix [ 0.839183] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 0.839192] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 0.839239] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.839246] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.839300] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.839708] scsi2 : ata_piix [ 0.839841] scsi3 : ata_piix [ 0.840301] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19 [ 0.840308] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19 [ 0.840429] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.840467] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.840488] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.841159] Fixed MDIO Bus: probed [ 0.841205] tun: Universal TUN/TAP device driver, 1.6 [ 0.841210] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.841322] PPP generic driver version 2.4.2 [ 0.841515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.841542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.841567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.841573] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.841658] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.845582] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.845610] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.860022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.860264] hub 1-0:1.0: USB hub found [ 0.860272] hub 1-0:1.0: 6 ports detected [ 0.860404] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.860424] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.860430] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.860512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.864413] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.864438] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.880021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.880227] hub 2-0:1.0: USB hub found [ 0.880234] hub 2-0:1.0: 6 ports detected [ 0.880369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.880396] uhci_hcd: USB Universal Host Controller Interface driver [ 0.880431] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.880443] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.880449] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.880529] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.880574] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.880803] hub 3-0:1.0: USB hub found [ 0.880811] hub 3-0:1.0: 2 ports detected [ 0.880929] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.880940] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.880946] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.881039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.881081] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.881302] hub 4-0:1.0: USB hub found [ 0.881310] hub 4-0:1.0: 2 ports detected [ 0.881427] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.881438] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.881443] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.881523] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.881551] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.881774] hub 5-0:1.0: USB hub found [ 0.881781] hub 5-0:1.0: 2 ports detected [ 0.881899] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.881910] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.881915] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.882021] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.882244] hub 6-0:1.0: USB hub found [ 0.882252] hub 6-0:1.0: 2 ports detected [ 0.882370] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.882381] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.882386] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.882467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.882495] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.882735] hub 7-0:1.0: USB hub found [ 0.882742] hub 7-0:1.0: 2 ports detected [ 0.882858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.882869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.882875] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.882954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.882982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.883205] hub 8-0:1.0: USB hub found [ 0.883213] hub 8-0:1.0: 2 ports detected [ 0.883435] usbcore: registered new interface driver libusual [ 0.883535] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.883926] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883936] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884187] mousedev: PS/2 mouse device common for all mice [ 0.884433] rtc_cmos 00:03: RTC can wake from S4 [ 0.884582] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.884612] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.884719] device-mapper: uevent: version 1.0.3 [ 0.884854] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 0.884917] EISA: Probing bus 0 at eisa.0 [ 0.884921] EISA: Cannot allocate resource for mainboard [ 0.884925] Cannot allocate resource for EISA slot 1 [ 0.884929] Cannot allocate resource for EISA slot 2 [ 0.884932] Cannot allocate resource for EISA slot 3 [ 0.884936] Cannot allocate resource for EISA slot 4 [ 0.884940] Cannot allocate resource for EISA slot 5 [ 0.884943] Cannot allocate resource for EISA slot 6 [ 0.884947] Cannot allocate resource for EISA slot 7 [ 0.884950] Cannot allocate resource for EISA slot 8 [ 0.884954] EISA: Detected 0 cards. [ 0.884969] cpufreq-nforce2: No nForce2 chipset. [ 0.884973] cpuidle: using governor ladder [ 0.884976] cpuidle: using governor menu [ 0.884980] EFI Variables Facility v0.08 2004-May-17 [ 0.885476] TCP cubic registered [ 0.885708] NET: Registered protocol family 10 [ 0.886771] NET: Registered protocol family 17 [ 0.886799] Registering the dns_resolver key type [ 0.886837] Using IPI No-Shortcut mode [ 0.887028] PM: Hibernation image not present or could not be loaded. [ 0.887047] registered taskstats version 1 [ 0.902579] Magic number: 12:339:388 [ 0.902592] usb usb6: hash matches [ 0.902687] rtc_cmos 00:03: setting system clock to 2012-05-11 16:23:41 UTC (1336753421) [ 0.903185] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903189] EDD information not available. [ 1.170710] ata3: SATA link down (SStatus 0 SControl 300) [ 1.181439] ata4: SATA link down (SStatus 0 SControl 300) [ 1.288020] Refined TSC clocksource calibration: 2499.999 MHz. [ 1.288028] Switching to clocksource tsc [ 1.292016] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 1.486745] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.486762] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.640115] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.640130] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.648342] ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 1.648348] ata1.00: 490234752 sectors, multi 0: LBA48 [ 1.664325] ata1.00: configured for UDMA/133 [ 1.664531] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 1.664745] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.664809] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.664838] sd 0:0:0:0: [sda] Write Protect is off [ 1.664843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.664884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.691699] sda: sda1 sda2 sda3 sda4 [ 1.692348] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.692461] Freeing unused kernel memory: 740k freed [ 1.692820] Write protecting the kernel text: 5828k [ 1.692851] Write protecting the kernel read-only data: 2376k [ 1.692854] NX-protecting the kernel data: 4412k [ 1.723980] udevd[92]: starting version 175 [ 1.865339] Floppy drive(s): fd0 is 1.44M [ 1.865429] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.865478] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.867875] sky2: driver version 1.30 [ 1.867926] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.867942] sky2 0000:04:00.0: setting latency timer to 64 [ 1.867979] sky2 0000:04:00.0: Yukon-2 EC chip revision 2 [ 1.868111] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.868174] scsi4 : pata_jmicron [ 1.869802] sky2 0000:04:00.0: eth0: addr 00:01:29:a4:16:0a [ 1.869828] scsi5 : pata_jmicron [ 1.869943] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.869949] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.880053] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.884052] FDC 0 is a post-1991 82077 [ 2.032611] ata5.00: ATAPI: _NEC DVD+/-RW ND-3450A, 103C, max UDMA/33 [ 2.048585] ata5.00: configured for UDMA/33 [ 2.049777] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-3450A 103C PQ: 0 ANSI: 5 [ 2.051048] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.051054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.051283] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.051483] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.079838] usbcore: registered new interface driver usbhid [ 2.079844] usbhid: USB HID core driver [ 2.236660] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.150230] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.177342] udevd[333]: starting version 175 [ 12.195524] Adding 417684k swap on /dev/sda2. Priority:-1 extents:1 across:417684k [ 12.278032] lp: driver loaded but no devices found [ 12.516456] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2 [ 12.520297] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input2 [ 12.520753] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.1-1:1 [ 12.523286] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input3 [ 12.524439] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.1-1:2 [ 12.545746] type=1400 audit(1336771433.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 12.546574] type=1400 audit(1336771433.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 12.547034] type=1400 audit(1336771433.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 12.626869] Linux video capture interface: v2.00 [ 12.649104] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a) [ 12.668665] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4 [ 12.668909] usbcore: registered new interface driver uvcvideo [ 12.668914] USB Video Class driver (1.1.1) [ 12.697645] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.697721] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 12.697760] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.706772] nvidia: module license 'NVIDIA' taints kernel. [ 12.706778] Disabling lock debugging due to kernel taint [ 12.735428] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.350252] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.350267] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.350275] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.351464] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 13.356785] hda_codec: ALC889A: BIOS auto-probing. [ 13.357267] init: failsafe main process (658) killed by TERM signal [ 13.372756] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 13.373173] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.373568] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.373954] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.374339] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.374715] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.375109] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.375724] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.475252] type=1400 audit(1336771434.065:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 13.477026] type=1400 audit(1336771434.069:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 13.477695] type=1400 audit(1336771434.069:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 13.479048] type=1400 audit(1336771434.069:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=734 comm="apparmor_parser" [ 13.488994] type=1400 audit(1336771434.081:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=738 comm="apparmor_parser" [ 13.489972] type=1400 audit(1336771434.081:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=738 comm="apparmor_parser" [ 13.

  Read the article

• How to troubleshoot problem with OpenVpn Appliance Server not able to connect

  - by Peter

  1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenSvn Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

  Read the article

• How to troubleshoot problem with OpenVPN Appliance Server not able to connect

  - by Peter

  1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenVPN Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

  Read the article

• USB Ports on the NETGEAR ReadyNAS NV+ 4-Bay 4TB

  - by Kyle Brandt

  I have several external USB drives currently (1x500GB and 2x1TB). If I were to purchase the ReadNAS NV+ 4TB NAS, would I be able to: Possibly add even more USB drives to it with a HUB? Export NFS shares of the data on the USB drives keeping the current ext3 fs and data on the USB drives intact? Does anyone have any caveats with this system they feel I should know?

  Read the article

• What's the difference between "Flash Drive" and "Flash Memory"?

  - by Clive D

  I have a problem with a Blu ray disk I bought. I talked to a Sony technician who advised me to plug a "USB Flash Memory Stick" into the Blu-ray player. Is this something specific? Is there a difference between the following two? "USB Flash Drive" "USB Flash Memory" When I go to Curry's or other sites that sell USB Sticks, they only talk about "USB Flash Drives". I've been in computing for many years and know the basics, but "memory" and "drive" are different things to me.

  Read the article

• unable to transfer files from handy cam to PC

  - by user143989

  I am using a Windows 7 PC,I am using sony dcr -sr88 handy cam . I need to transfer all my videos from handycam to my PC. when i try to connect to the PC through USB. it detects the usb drive in the Handycam on my PC and shows the used memory. But when i open the folder it shows "folder is empty". How i can copy the files? I have tried following: Changed the USB cable CHanged the USB port I can play the videos through handicam, but those files not visible in PC when connected in USB mode. Please help ..bit urgent!

  Read the article

• Empty MacBook Pro, no SuperDrive. How do I install Windows?

  - by MCcz

  My situation is this: HDD1: Empty 180 GB SSD HDD2: Empty 500 GB HDD (instead of SuperDrive) Accessories: Windows 8 ISO 64 Gig USB stick Second computer SuperDrive in USB enclosure What I need: Install Windows 8 on the SSD in the laptop What I tried: Create bootable USB – Doesn't work. Macbook doesnt show me USB as an option after holding OPTION key. Install Windows through SuperDrive connected via USB – Doesn't work. On the internet, there are thousands of articles telling me all kinds of solutions, expecting me to have Mac OS on my laptop. Is there any solution to this?

  Read the article

• I have a bunch of CHK files on my USB Drive that used to be my stories that I saved on there. How do I get them back?

  - by Susana

  Ok, so I am not sure why, but my USB flash drive isn't showing all of my stories that I typed and saved. It might be because I removed the USB flash drive without ejecting it safely. All of the data was there on my flash drive, I just couldn't see it. The capacity was almost full so I'm pretty sure the data was there. So, when I decided to run and check to see if there were any problems, the computer found that there were. I think it found my files, but now they are CHK files and I don't know how to get them back. Can someone please help? This is my life's work here!

  Read the article

• Boot from external usb hdd won't work in 12.04

  - by Ben Andersen

  I've been running 10.04 on an external USB HDD without problems for years. I installed 12.04 on an external USB HDD and it worked until I upgraded to all the new packages. But after that it wouldn't boot. I just got into the grub prompt. So then I tried installing on the disk inside the computer and that worked fine. But when I take it out and use it as an external USB HDD I just get: error: hd0 out of disk. grub rescue> How can I fix this? So why do I want this you might wonder? Well I have a laptop at home and a somewhat similar at work. And I just move the disk between them and don't have to move a heavy laptop. So I really hope I can continue doing this with 12.04! The old disk is only 80Gb but the new one is 320Gb (7200rpm Toshiba). I'm using 12.04 on a 64Gb SSD as an external drive and it warns about out of disk but it boots anyway most of the times.

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• Samba share external USB device

  - by bioShark

  I managed to share stuff from my Ubuntu 12.04 to my private network, and the data is visible from a Windows machine. I even shared a hdd that has windows on it. So everything seems to work fine. When I want to share a mounted device (USB pen drive, USB HDD... etc) however, I get from the Windows machine: Access denied on file \... I realize that this is due to the missing rights on the mounted folder. By default a mounted folder gets the equivalent of 700 : drwx------, and the owner myself. But, I can't seem to change the rights on the external device... they remain 700. Is there a special trick I need to do in order to share NTFS mounted usb devices? Thanks P.S. from this Question I see that NTFS devices can not be shared....is this true? It's a bit strange, because I have in my PC 2 HDD's with 3 NTFS partitions, and I can share them without a problem.

  Read the article

• Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

  - by mattalexx

  I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >