Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 62/361 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• How do I get a D-Link DWL-G520 working?

  - by human33

  I have Ubuntu 12.04 on an older desktop PC, and I am finding it much harder to connect to a wifi connection than it should be. I have an iPhone with which I want to tether to it with Mifi 4.0, but I need to install ipheth which I can't do without internet on that computer. I am typing from my other windows pc with which i can download and move hings with thumb drives, but haven't gotten keryx to work. I also found a D-Link DWL-G520 HIGH SPEED 2.4GHZ (802.11G) WIRELESS 108MBPS PCI ADAPTER which I installed, but can't find a driver to put on a flashdrive to use it. If anybody has any ideas, they are appreciated. I am a noob, and I don't want to have to move the comp. downstairs to plug into the modem. PS: I also have a netgear USB network adapter, which doesn't work with my Ubuntu.

  Read the article

• Wifi USB interface being detected after some time

  - by Dani

  I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

  Read the article

• 3.5.0-18 kernel update broke BCM43228

  - by ignition

  After updating the kernel to 3.5.0-18 the Broadcom BCM43228 wireless card of my Acer Aspire One 756 has stopped working properly. The card often refuses to connect to my AP, and if it connects it behaves very unstable. I have already reinstalled the drivers, as recommended by googling around. As far as I can tell the only driver that supports my card is the bcmwl package. I found one solution saying I should install broadcom-sta using module assistant, however I could not get this to install and apparently broadcom-sta and bcmwl are effectively the same driver? Is anyone experiencing similar issues? Is it possible to just downgrade to the previous kernel version?

  Read the article

• Set up Trendnet TEW-638APB Access point on Ubuntu 14.04

  - by Mr. Smileys

  I have a computer running Ubuntu 14.04, it has 2 Ethernet ports. I would like to set up this computer so that the internet comes in on one of the ports and is then shared through the other port with the Trendnet wireless access point that my other devices would connect to and use the internet. I have looked online for information on setting this up but have not been able to find anything. If someone could point me to a guide that would help me or just tell me how to do this in an answer I would really appreciate it. please help me to solve this problem

  Read the article

• How to Install Linux on my PC

  - by Holic

  Hi i need some help to install the drivers from my pc, on Ubuntu 10.10 i just installed it, and i a newbie on Ubuntu, but i understand a bit of Windows...but i want to try ubuntu and then Maybe change to UBUNTU!!! My hardware: QuadCore Intel Core i7-870, 3266 MHz (24 x 136) Asus P7P55D-E (2 PCI, 3 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394) NVIDIA GeForce GTX 480 (1536 MB) nVIDIA HDMI @ nVIDIA GF100 - High Definition Audio Controller VIA VT1828S @ Intel Ibex Peak PCH - High Definition Audio Controller [B-3] DIMM1: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) DIMM3: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) my pc is not connected to the internet with a wire(RJ45) but with a wireless LAn Asus WL-167G-V3(wich i also whant to install if possible) Anything would've help me :) Cheers & Thank you!

  Read the article

• After running updates in 10.10 Netbook Remix, Ralink 5390 Not working

  - by nosound

  Additional Drivers still lists the driver. Reports it as being activated but not in use. Prior to running updates, wireless was working fine. Set it up using this guide: http://www.upubuntu.com/2012/02/how-to-install-drivers-for-ralink.html Thoughts and reflections would be much appreciated. ... nm. Using Synaptic Package Manager, marked for reinstallation, reinstalled, rebooted. Back to the way things were. Little new to this side of the world. ;)

  Read the article

• Ad-hoc network(hot spot created) not detected by android phone

  - by Nirmik

  I created a hot spot via network wireless use as hotspot. Other laptops successfully detected the hot-spot,could connect and use it without any problem. But no android phone could detect it.! I tried with many android phones but none could.(I found out that even an ad-hoc created in windows is not detected by any phone) So is there anything wrong i am doing(rather i am not doing anything actually other than clicking on the "use as hotspt" button..but still..)? or is that the network cannot be shared with phones? and if not,how can i share it with phones?

  Read the article

• How to set up router with DSL?

  - by NightwishFan

  I have a Verizon DSL connection. I am new to being the one who has to maintain the net. We have the Verizon modem and plugged into it is a belkin router. I did not alter the configuration on either of the devices. We get a net connection, though I have issues joining any form of online game. Some refuse to connect, others are slow. I have read that perhaps I need to use the modem in "bridge mode" to the wireless router? Would that fix my issues? Or do I just have to open ports or something similar. I really have no clue what could be the problem. Could someone advice me how to get this working with Ubuntu?

  Read the article

• Wifi works perfectly on Windows, but drops on Ubuntu

  - by alecRN

  I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

  Read the article

• Wifi not working after upgrading from 12.04 to 13.10

  - by Gary

  I went through loads of posts looking for an answer to my WiFi problems but can't seem to fix it. I had Ubuntu 12.04 installed and WiFi worked fine with no issues whatsoever but then I upgraded to 13.10 it has stopped working. It shows the available networks but I can't connect to any of them it just does that animation thing then stops working. Update Heres the link to pastebin: http://pastebin.com/GyMMEYhv And heres what wifi card i have and driver lspci: 01:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: Hewlett-Packard Company Device [103c:18de] Kernel driver in use: r8169 02:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290] Subsystem: Hewlett-Packard Company Device [103c:18ec] Kernel driver in use: rt2800pci

  Read the article

• Load old kernel module while keeping current

  - by legion

  So I was wondering if there is anyway that I would be able to load an old iwlwifi from a 2.6 kernel while still using the 3.2 kernel and if there was a guide to doing so? I need to be able to do so because my wireless card is.... well the new kernels have broken all support for my card, which is a Intel Ultimate-N 6300. I'm extremely upset with how badly they broke support for this card to the point where I can't connect to any router that isn't wifi N enabled and even then only a select few routers work, it amazes me as to how awful it is and whats more amazing is how well it worked in 2.6 kernels. I've tried all the work arounds that have been discussed to try and fix this, and the only thing I have found that works is running a 2.6 kernel. However I would like to be able to keep my 3.2 kernel and just load up an old version of iwlwifi that actually supports it, is there anyway to do this?

  Read the article

• MacMini (running Ubuntu 14.04) loses wlan connection when uploading larger files (several 100 mb) via ownCloud

  - by ManekenT

  I installed Ubuntu 14.04 on an old MacMini with the intention of running it as a homeserver. Additionally I installed ownCloud and tried to sync some files both from a laptop running elementaryOS and a desktop running windows 7. Syncing smaller files workes like a charm (4000 files at <10mb each) but when it comes to bigger files (1 GB ubuntu iso e.g.) the upload failes after 20-100mb. I can't ping the server anymore and the server can't ping me. It still shows up in our router as connected though. Disconnecting and reconnecting the wlan connection fixes the issue until the next attempt at syncing. Edit: I also had to install the wlan driver with this manual: https://help.ubuntu.com/community/MacBookPro8-2#Wireless

  Read the article

• Deactivated wifi drivers, now they won't activate again on a Dell Mini 10v?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Deactivated wifi drivers, now they wont activate again?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Removing a module when I add a new better one?

  - by yinon

  I'm using this guide to install my TL-WN822N (Wireless/Wifi). I need to add 8192cu at the end of /etc/modules, but I see another module there (Copy-Paste file): # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. lp 8192cuvhba vhba Should I remove it or is that unnecessary? Thanks for any help!

  Read the article

• Samsung NC10 Broadcom difficulties

  - by simonp

  I am new to Ubuntu/Linux and am stuck already! Any help much appreciated. I have managed to install Ubuntu Maverick 10.10 (from a USB flash drive) on my NC10 which also has Windows 7 on the partitioned drive. But the wireless internet is not working. I have identified the hardware as a Broadcom BCM4313. I have also managed to find that the correct driver is installed (Modaliases for Broadcom 802.11 Linux STA driver). I have followed advice from elsewhere and there does not seem to be any competition from other drivers. I am now stuck and do not have any other internet access on this netbook. Any ideas?

  Read the article

• How do I do a B43 Legacy install on Ubuntu 11.10?

  - by Gozzy

  I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

  Read the article

• Wifi very slow on Ubuntu 12.04 but not on Win7, need help

  - by user84504

  I have an enormous problem: I've a Sony Vaio VGN-NR21S with win7 and Ubuntu 12.04 in dual boot. With Windows everything is fine (except that is windows) but with Ubuntu the wireless connection is awfully slow, basically unusable. I've already search for similar discussion but the solution proposed didn't worked. I've noticed this issue also in live mode both with ubuntu and linux mint. I've installed Ubuntu onto an Acer that shows the same problem when connected via wifi to my router, so I think that maybe the issue is about compatibility with my home router. I really need help, I don't want unistall ubuntu! Please tell me which output u need to help me, thanks.

  Read the article

• Need instructions on how to create wpa_supplicant.conf and add fast_reauth=0 to it

  - by nutty about natty

  Like many other natty users on a university/academic network, I'm experiencing annoying frequent disconnects/hangs/delays. See, for instance here. I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: README You will need to make a configuration file, e.g. /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

  Read the article

• WiFi USB adapter showing the Network ..... but no connection in effect

  - by Idrees

  I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

  Read the article

• Ubuntu and WiFi Network

  - by Anonymous

  I have been trying to figure out this problem. I am currently dual-booting Ubuntu with my Windows machine. My Ubuntu would connect to my wireless router but it cannot access any web pages nor ping any hosts. Wired connection works just fine. My Windows OS in the same machine (with the exact same network configuration as my Ubuntu machine) connects and works fine. I don't know why Ubuntu cannot access the Internet. Any ideas?

  Read the article

• Samsung RV520 with 12.04 freezes while having WiFi and brightness control issues

  - by daveu1

  I have a new Samsung RV520 and have just installed Precise Pangolin 12.04 LTS. I am having serious problems now with the wifi constantly disconnecting. This then causes the brightness control to appear on the screen. The screen starts flickering and then freezes the whole machine. Indeed the brightness control doesn't work at all. I am using a Intel Centrino N wireless card. Please can anyone provide any guidance as to how to resolve these issue on this machine. Many thanks for your help.

  Read the article

• Laptop wakes while lid is closed and overheats

  - by user56601

  I'm running 12.04 on a toshiba L305D with athlon x2 (Already suspect this has something to do with it). My laptop will wake from suspend, presumably from wireless scanning. This is a serious bug as sleeping laptops are often inside bags, so the cooling system is effectively disabled. I can no longer seriously use Ubuntu when I have to worry about hardware damage every time I close the lid. There is shockingly lack of information about anything close to this. So many control panels have been removed or dumbed down, and everyone seems to want this behavior instead of the opposite, for servers or torrents of whatever. Well, most laptop users will 99% be likely to regularly put their laptop in a backpack or briefcase or other bag. Does anyone know how to fix this?

  Read the article

• How to run just one application over ethernet while others on wifi

  - by db42

  I normally connect my laptop via wifi. However, I would like to use synergy to share my workplace desktop machine with my laptop. But the problem is that my desktop machine doesn't have wireless support. So, I have no other options except using ethernet to connect them. My first question is - Is it possible to use ethernet for synergy and keep using wifi for all other application. If the answer is yes, can somebody please guide me how to achieve this. Thanks,

  Read the article

• BCM4313 partially working on Toshiba Satellite R630 (Ubuntu 12.10)

  - by Denis

  New to Ubuntu. During installation, the computer identified the wifi card and asked me to connect to the network. I did. After the first restart the wifi was working and I could see networks and connect to them. After the second restart the wireless has VANISHED. Still, the Broadcom STA drivers are enabled in system settings/additional drivers. Tried to restart 5 more times- no effect. I have studied very many topics on askubuntu but none of them work.

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >