Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 621/792 | < Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >

• NEC Corporation uPD720200 USB 3.0 controller doesn't run at full speed

  - by Radek Zyskowski

  I have fresh install of Ubuntu 10.10. I have external HD on USB 3.0. Trying to connect this via PCI Express NEC controller. dmesg: [ 8966.820078] usb 6-3: new high speed USB device using xhci_hcd and address 0 [ 8966.839831] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.840580] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.841329] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.842079] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.843343] scsi8 : usb-storage 6-3:1.0 [ 8967.847144] scsi 8:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 8967.847589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 8967.847923] sd 8:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8967.848341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.850959] sd 8:0:0:0: [sdb] Write Protect is off [ 8967.850963] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8967.850966] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.851818] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.852365] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.852370] sdb: sdb1 [ 8967.871315] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.871853] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.871856] sd 8:0:0:0: [sdb] Attached SCSI disk [ 8967.950728] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.951355] sd 8:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [ 8967.951361] Descriptor sense data with sense descriptors (in hex): [ 8967.951363] 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [ 8967.951375] 00 00 00 00 00 50 [ 8967.951380] sd 8:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [ 8968.790076] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 8968.790076] usb 6-3: USB disconnect, address 2 [ 8999.008554] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008558] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 8999.008562] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 39 00 00 3e 00 [ 8999.008573] end_request: I/O error, dev sdb, sector 1953535801 [ 8999.008578] Buffer I/O error on device sdb1, logical block 1953535738 [ 8999.008582] Buffer I/O error on device sdb1, logical block 1953535739 [ 8999.008585] Buffer I/O error on device sdb1, logical block 1953535740 [ 8999.008589] Buffer I/O error on device sdb1, logical block 1953535741 [ 8999.008592] Buffer I/O error on device sdb1, logical block 1953535742 [ 8999.008595] Buffer I/O error on device sdb1, logical block 1953535743 [ 8999.008600] Buffer I/O error on device sdb1, logical block 1953535744 [ 8999.008603] Buffer I/O error on device sdb1, logical block 1953535745 [ 8999.008606] Buffer I/O error on device sdb1, logical block 1953535746 [ 8999.008609] Buffer I/O error on device sdb1, logical block 1953535747 [ 8999.008642] scsi 8:0:0:0: rejecting I/O to offline device [ 8999.008747] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008749] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8999.008752] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 77 00 00 3e 00 [ 8999.008760] end_request: I/O error, dev sdb, sector 1953535863 sudo lspci -v 2:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Physical Slot: 32 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd If I try to put into this controller any USB 2.0, it works fine. But USB 3.0 nope. Any idea?

  Read the article

• ODUG lands DotNetNuke guru Nik Kalyani as a speaker

  - by Brian Scarbeau

  If you are in the Orlando, FL area during the first week of May then you should head over to the Orlando DotNetNuke user group meeting. Nik Kalyani will be the speaker and you will learn a great deal from him. DotNetNuke Module Development with the MVP Pattern This session focuses on introducing attendees to the Model-View-Presenter pattern, support for which was recently introduced in the DotNetNuke Core. We'll start with a quick overview of the pattern, compare it to MVC, and then dive right into code. We will start with fundamentals and then develop a full-featured module using this pattern. In order to do justice to the pattern, we will use ASP.NET WebForms controls minimally and implement most of the UI using jQuery plug-ins. Finally, to increase audience participation (both present at the meeting and remote), we will use a hackathon-style model and allow anybody, anywhere to follow along with the presentation and code their own MVP-based solution that they can share online during or after the session. A URL with full instructions for the hackathon will be posted online a few days prior to the meeting. About Our Speaker Nik Kalyani is Co-founder and Strategic Advisor for DotNetNuke Corp., the company that manages the DotNetNuke Open Source project. Kalyani is also Founder and CEO of HyperCrunch. He is a technology entrepreneur with over 18 years of experience in the software industry. He is irrationally exuberant about technology, especially if it has anything to do with the Internet. HyperCrunch is his latest startup business that builds on his knowledge and experience from prior startups, two of them venture-funded. Kalyani is a creative tinkerer perpetually interested in looking around the corner and figuring out new and interesting ways to make the world a better place. An experienced web developer, he finds the business strategy and marketing aspects of the software business more exciting than writing code. When he does create software, his primary expertise is in creating products with compelling user experiences. Kalyani is most proficient with Microsoft technologies, but has no religious fanaticism about them. Kalyani has a bachelor’s degree in computer science from Western Michigan University. He is a frequent speaker at technology conferences and user group meetings. He lives in Mountain View, California with his wife and daughters. He blogs at http://www.kalyani.com and is @techbubble on Twitter.

  Read the article

• What micro web-framework has the lowest overhead but includes templating

  - by Simon Martin

  I want to rewrite a simple small (10 page) website and besides a contact form it could be written in pure html. It is currently built with classic asp and Dreamweaver templates. The reason I'm not simply writing 10 html pages is that I want to keep the layout all in 1 place so would need either includes or a masterpage. I don't want to use Dreamweaver templates, or batch processing (like org-mode) because I want to be able to edit using notepad (or Visual Studio) because occasionally I might need to edit a file on the server (Go Daddy's IIS admin interface will let me edit text). I don't want to use ASP.NET MVC or WebForms (which I use in my day job) because I don't need all the overhead they bring with them when essentially I'm serving up 9 static files, 1 contact form and 1 list of clubs (that I aim to use jQuery to filter). The shared hosting package I have on Go Daddy seems to take a long time to spin up when serving aspx files. Currently the clubs page is driven from an MS SQL database that I try to keep up to date by manually checking the dojo locator on the main HQ pages and editing the entries myself, this is again way over the top. I aim to get a text file with the club details (probably in JSON or xml format) and use that as the source for the clubs page. There will need to be a bit of programming for this as the HQ site is unable to provide an extract / feed so something will have to scrape the site periodically to update my clubs persistence file. I'd like that to be automated - but I'm happy to have that triggered on a visit to the clubs page so I don't need to worry about scheduling a job. I would probably have a separate process that updates the persistence that has nothing to do with the rest of the site. Ideally I'd like to use Mercurial (or git) to publish, I know Bitbucket (and github) both serve static page sites so they wouldn't work in this scenario (dynamic pages and a contact form) but that's the model I'd like to use if there is such a thing. My requirements are: Simple templating system, 1 place to define header, footers, menu etc., that can be edited using just notepad. Very minimal / lightweight framework. I don't need a monster for 10 pages Must run either on IIS7 (shared Go Daddy Windows hosting) or other free host

  Read the article

• A New Home for E-Business Suite Customer Adoption Information

  - by linda.fishman.hoyle

  Phew! I made it! A new home with my name. Let's talk about E-Business Suite. So much is going on and more and more customers are upgrading and implementing the latest release. I think I will highlight in this blog entry the most recent press release we issued 2 weeks ago about our Applications Unlimited success but in the release, we name several customers who are live on E-Business Suite Release 12.1 and then have a fabulous quote from a customer who is doing great things with our product.   Here is a link to the press release To make it easy for you, I am pulling out just the E-Business Suite information Oracle E-Business Suite: Oracle® E-Business Suite Release 12.1 provides organizations of all sizes, across all industries and regions, with a global business foundation that helps them reduce costs and increase productivity through a portfolio of rapid value solutions, integrated business processes and industry-focused solutions. The latest version of the Oracle E-Business Suite was designed to help organizations make better decisions and be more competitive by providing a global or holistic view of their operations. Abu Dhabi Media Company, Agilysis, C3 Business Solutions, Chicago Public Schools, Datacard Group, Guidance Software, Leviton Manufacturing, McDonald's, MINOR International, Usana Health Sciences, Zamil Plastic Industries Ltd. and Zebra Technologies are just a few of the organizations that have deployed the latest release of the Oracle E-Business Suite to help them make better decisions and be more competitive, while lowering costs and increasing performance. Customer Speaks "Leviton Manufacturing makes a very diverse line of products including electrical devices and data center products that we sell globally. We upgraded to the latest version of the Oracle E-Business Suite Release 12.1 to support our service business with change management, purchasing, accounts payable, and our internal IT help desk," said Bob MacTaggart, CIO of Leviton Manufacturing. "We consolidated seven Web sites that we used to host individually onto iStore. In addition, we run a site, using the Oracle E-Business Suite configurator, pricing and quoting for our sales agents to do configuration work. This site can now generate a complete sales proposal using Oracle functionality; we actually generate CAD drawings - the actual drawings themselves - based on configuration results. It used to take six to eight weeks to generate these drawings and now it's all done online in an hour to two hours by our sales agents themselves, totally self-service. It does everything they need. From our point of view that is a major business success. Not only is it a very cool, innovative application, but it also puts us about two years ahead of our competition."

  Read the article

• JSR 360 and JSR 361: A Big Leap for Java ME 8

  - by terrencebarr

  It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

  Read the article

• JSR 360 and JSR 361: A Big Leap for Java ME 8

  - by terrencebarr

  It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by J Swaroop

  Re-posting Bruce Tierney's original post - albeit a day late: I reckon this is Oracle's most interesting launch this year. Enjoy! The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• Move Window Buttons Back to the Right in Ubuntu 10.04

  - by Trevor Bekolay

  One of the more controversial changes in the Ubuntu 10.04 beta is the Mac OS-inspired change to have window buttons on the left side. We’ll show you how to move the buttons back to the right. Before While the change may or may not persist through to the April 29 release of Ubuntu 10.04, in the beta version the maximize, minimize, and close buttons appear in the top left of a window. How to move the window buttons The window button locations are dictated by a configuration file. We’ll use the graphical program gconf-editor to change this configuration file. Press Alt+F2 to bring up the Run Application dialog box, enter “gconf-editor” in the text field, and click on Run. The Configuration Editor should pop up. The key that we want to edit is in apps/metacity/general. Click on the + button next to the “apps” folder, then beside “metacity” in the list of folders expanded for apps, and then click on the “general” folder. The button layout can be changed by changing the “button_layout” key. Double-click button_layout to edit it. Change the text in the Value text field to: menu:maximize,minimize,close Click OK and the change will occur immediately, changing the location of the window buttons in the Configuration Editor. Note that this ordering of the window buttons is slightly different than the typical order; in previous versions of Ubuntu and in Windows, the minimize button is to the left of the maximize button. You can change the button_layout string to reflect that ordering, but using the default Ubuntu 10.04 theme, it looks a bit strange. If you plan to change the theme, or even just the graphics used for the window buttons, then this ordering may be more natural to you. After After this change, all of your windows will have the maximize, minimize, and close buttons on the right. What do you think of Ubuntu 10.04’s visual change? Let us know in the comments! Similar Articles Productive Geek Tips Move a Window Without Clicking the Titlebar in UbuntuBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick)Keep the Display From Turning Off on UbuntuPut Close/Maximize/Minimize Buttons on the Left in UbuntuAllow Remote Control To Your Desktop On Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

  Read the article

• gcc segmentation fault on Ubuntu 12.04

  - by Yuval F

  I am trying to compile a C program on Ubuntu precise 12.04. Here's the program: #include <stdio.h> int main(int argc, char** argv) { printf("Hello World!"); return 0; } My gcc version is 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5). Initially it did not find cc1 so I added a soft link. Now I get this message when I try to compile: gcc: internal compiler error: Segmentation fault (program cc1) Compiling the same program with g++ works fine. I tried reinstalling build-essential, but to no avail. What am I missing? EDIT: I tried reinstalling according to @gertyvdijk's suggestion. As it did not help, here is the output of apt-cache policy gcc-4.6: gcc-4.6: Installed: 4.6.3-1ubuntu5 Candidate: 4.6.3-1ubuntu5 Version table: *** 4.6.3-1ubuntu5 0 500 http://il.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages 100 /var/lib/dpkg/status and the output of ls -l /usr/bin/gcc: lrwxrwxrwx 1 root root 7 Mar 13 2012 /usr/bin/gcc -> gcc-4.6 EDIT #2: here's a verbose compiler output: gcc -v aaa.c Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) COLLECT_GCC_OPTIONS='-v' '-mtune=generic' '-march=x86-64' /usr/lib/gcc/x86_64-linux-gnu/4.6/cc1 -quiet -v -imultilib . -imultiarch x86_64-linux-gnu aaa.c -quiet -dumpbase aaa.c -mtune=generic -march=x86-64 -auxbase aaa -version -fstack-protector -o /tmp/ccHfcXMs.s gcc: internal compiler error: Segmentation fault (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions.

  Read the article

• Silverlight Cream for June 10, 2010 -- #879

  - by Dave Campbell

  In this Issue: Emiel Jongerius, Nokola, Christian Schormann, Tim Heuer, David Poll, Mike Snow(-2-), John Papa, and Charles Petzold. Shoutout: Viktor Larsson has a frank look at WP7 based on information from MIX10 and what was said this week in his post: Licking Windows Phone 7... yeah licking, not liking :) .. my guess is even that didn't allow him to keep it! If you haven't already noticed, the CodeProject reader's choice awards are out this week and Telerik won for their RadColorPicker and RadCalendar for Silverlight Telerik also needs congratulations for winning Telerik wins “Best of TechEd” award in the “Components and Middleware” category... check out that trophy... Steven Forte has a picture up of the Telerikers after getting the award. Koen Zwikstra has a new release of Silverlight Spy up that supports the latest release: Silverlight Spy 3.0.0.12 From SilverlightCream.com: Localization of XAML files in Silverlight Emiel Jongerius is back with another post, this time discussing Localizing XAM files... external links and source included. Coolest Silverlight Sound Library for Games I've Seen Yet Nokola talks up a Sound Library for Silverlight 4 Games ... and has links to a great demo, plus the source. SketchFlow: Firing Actions when a Storyboard is Complete Christian Schormann responded to some Twitter questions and demonstrates using the StoryboardCompleted trigger with a Navigate action. Hosting cross-domain Silverlight applications (XAP) Tim Heuer responds to a question from a reader and demonstrates how to host a XAP from a domain other than the one you're working on. Taking Microsoft Silverlight 4 Applications Beyond the Browser (TechEd WEB313) David Poll has all his material up from his TechEd presentation earlier this week on Silverlight OOB... and he covered some pretty extensive material ... check it out! Silverlight Tip of the Day #29 – Configuring Service Reference to Back to LocalHost Mike Snow has a couple new tips up... this first one is quick, but very useful... how to switch your service reference back to localhost without pulling out your hair. Silverlight Tip of the Day #30 – Sending Email from Silverlight In Mike Snow's latest tip, he shows how to send email from your Silverlight app... using a WCF service... and a step-by-step set of instructions. Creating Rich Interactions Using Blend 4: Transition Effects, Fluid Layout and Layout States (Silverlight TV #32) John Papa has Silverlight TV #32 up, and he's talking with Kenny Young of the Expression Blend team while Kenny uses some built-om effects and also creates some impressive examples from scratch -- code included. Simulating Touch Inertia on Windows Phone 7 Charles Petzold has a post up on simulating inertia on WP7... demos in WPF and then moves into WP7... math, source, and external links. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Microsoft MVP Award Nomination

  - by Mark A. Wilson

  I am extremely honored to announce that I have been nominated to receive the Microsoft MVP Award for my contributions in C#! Hold on; I have not won the award yet. But to be nominated is really humbling. Thank you very much! For those of you who may not know, here is a high-level summary of the MVP award: The Microsoft Most Valuable Professional (MVP) Program recognizes and thanks outstanding members of technical communities for their community participation and willingness to help others. The program celebrates the most active community members from around the world who provide invaluable online and offline expertise that enriches the community experience and makes a difference in technical communities featuring Microsoft products. MVPs are credible, technology experts from around the world who inspire others to learn and grow through active technical community participation. While MVPs come from many backgrounds and a wide range of technical communities, they share a passion for technology and a demonstrated willingness to help others. MVPs do this through the books and articles they author, the Web sites they manage, the blogs they maintain, the user groups they participate in, the chats they host or contribute to, the events and training sessions where they present, as well as through the questions they answer in technical newsgroups or message boards. - Microsoft MVP Award Nomination Email I guess I should start my nomination acceptance speech by profusely thanking Microsoft as well as everyone who nominated me. Unfortunately, I’m not completely certain who those people are. While I could guess (in no particular order: Bill J., Brian H., Glen G., and/or Rob Z.), I would much rather update this post accordingly after I know for certain who to properly thank. I certainly don’t want to leave anyone out! Please Help My next task is to provide the MVP Award committee with information and descriptions of my contributions during the past 12 months. For someone who has difficulty remembering what they did just last week, trying to remember something that I did 12 months ago is going to be a real challenge. (Yes, I should do a better job blogging about my activities. I’m just so busy!) Since this is an award about community, I invite and encourage you to participate. Please leave a comment below or send me an email. Help jog my memory by listing anything and everything that you can think of that would apply and/or be important to include in my reply back to the committee. I welcome advice on what to say and how to say it from previous award winners. Again, I greatly appreciate the nomination and welcome any assistance you can provide. Thanks for visiting and till next time, Mark A. Wilson      Mark's Geekswithblogs Blog Enterprise Developers Guild Technorati Tags: Community,Way Off Topic

  Read the article

• SBUG Session: The Enterprise Cache

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] I did a session on "The Enterprise Cache" at the UK SOA/BPM User Group yesterday which generated some useful discussion. The proposal was for a dedicated caching layer which all app servers and service providers can hook into, sharing resources and common data. The architecture might end up like this: I'll update this post with a link to the slide deck once it's available. The next session will have Udi Dahan walking through nServiceBus, register on EventBrite if you want to come along. Synopsis Looked at the benefits and drawbacks of app-centric isolated caches, compared to an enterprise-wide shared cache running on dedicated nodes; Suggested issues and risks around caching including staleness of data, resource usage, performance and testing; Walked through a generic service cache implemented as a WCF behaviour – suitable for IIS- or BizTalk-hosted services - which I'll be releasing on CodePlex shortly; Listed common options for cache providers and their offerings. Discussion Cache usage. Different value propositions for utilising the cache: improved performance, isolation from underlying systems (e.g. service output caching can have a TTL large enough to cover downtime), reduced resource impact – CPU, memory, SQL and cost (e.g. caching results of paid-for services). Dedicated cache nodes. Preferred over in-host caching provided latency is acceptable. Depending on cache provider, can offer easy scalability and global replication so cache clients always use local nodes. Restriction of AppFabric Caching to Windows Server 2008 not viewed as a concern. Security. Limited security model in most cache providers. Options for securing cache content suggested as custom implementations. Obfuscating keys and serialized values may mean additional security is not needed. Depending on security requirements and architecture, can ensure cache servers only accessible to cache clients via IPsec. Staleness. Generally thought to be an overrated problem. Thinking in line with eventual consistency, that serving up stale data may not be a significant issue. Good technical arguments support this, although I suspect business users will be harder to persuade. Providers. Positive feedback for AppFabric Caching – speed, configurability and richness of the distributed model making it a good enterprise choice. .NET port of memcached well thought of for performance but lack of replication makes it less suitable for these shared scenarios. Replicated fork – repcached – untried and less active than memcached. NCache also well thought of, but Express version too limited for enterprise scenarios, and commercial versions look costly compared to AppFabric.

  Read the article

• VSDB to SSDT part 4 : Redistributable database deployment package with SqlPackage.exe

  - by Etienne Giust

  The goal here is to use SSDT SqlPackage to deploy the output of a Visual Studio 2012 Database project… a bit in the same fashion that was detailed here : http://geekswithblogs.net/80n/archive/2012/09/12/vsdb-to-ssdt-part-3--command-line-deployment-with-sqlpackage.exe.aspx   The difference is we want to do it on an environment where Visual Studio 2012 and SSDT are not installed. This might be the case of your Production server.   Package structure So, to get started you need to create a folder named “DeploymentSSDTRedistributable”. This folder will have the following structure :         The dacpac and dll files are the outputs of your Visual Studio 2012 Database project. If your database project references another database project, you need to put their dacpac and dll here too, otherwise deployment will not work. The publish.xml file is the publish configuration suitable for your target environment. It holds connexion strings, SQLVARS parameters and deployment options. Review it carefully. The SqlDacRuntime folder (an arbitrary chosen name) will hold the SqlPackage executable and supporting libraries   Contents of the SqlDacRuntime folder Here is what you need to put in the SqlDacRuntime folder  :      You will be able to find these files in the following locations, on a machine with Visual Studio 2012 Ultimate installed : C:\Program Files (x86)\Microsoft SQL Server\110\DAC\bin : SqlPackage.exe Microsoft.Data.Tools.Schema.Sql.dll  Microsoft.Data.Tools.Utilities.dll Microsoft.SqlServer.Dac.dll C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.TransactSql.ScriptDom\v4.0_11.0.0.0__89845dcd8080cc91 Microsoft.SqlServer.TransactSql.ScriptDom.dll   Deploying   Now take your DeploymentSSDTRedistributable deployment package to your remote machine. In a standard command window, place yourself inside the DeploymentSSDTRedistributable  folder.   You can first perform a check of what will be updated in the target database. The DeployReport task of SqlPackage.exe will help you do that. The following command will output an xml of the changes:   "SqlDacRuntime/SqlPackage.exe" /Action:DeployReport /SourceFile:./Our.Database.dacpac /Profile:./Release.publish.xml /OutputPath:./ChangesToDeploy.xml      You might get some warnings on Log and Data file like I did. You can ignore them. Also, the tool is warning about data loss when removing a column from a table. By default, the publish.xml options will prevent you from deploying when data loss is occuring (see the BlockOnPossibleDataLoss inside the publish.xml file). Before actual deployment, take time to carefully review the changes to be applied in the ChangesToDeploy.xml file.    When you are satisfied, you can deploy your changes with the following command : "SqlDacRuntime/SqlPackage.exe" /Action:Publish /SourceFile:./Our.Database.dacpac /Profile:./Release.publish.xml   Et voilà !  Your dacpac file has been deployed to your database. I’ve been testing this on a SQL 2008 Server (not R2) but it should work on 2005, 2008 R2 and 2012 as well.   Many thanks to Anuj Chaudhary for his article on the subject : http://www.anujchaudhary.com/2012/08/sqlpackageexe-automating-ssdt-deployment.html

  Read the article

• Just another web startup - platform comparison

  - by Holland

  I'm looking to do a web startup which involves something along the lines of an ecommerce site, yet a little more in depth than that. While it's something that I would rather not go into detail with in terms of the initial idea, I can specify (on a basic level) what would be required of the website. If you have any observations or opinions derived from personal experience, which relate to what you see here, I'd appreciate it if you could share these. Paypal's API interaction (definitely). From what I've read about their API, integration with it into their website is VERY expensive, so I'd probably hold off on that until I've (hopefully) generated money and write my own simple credit-card interaction system. SQL Backend (obviously) PostgreSQL seems like a pretty good choice, as from what I've read, it's structure is a bit more "object-oriented" than, say, MySQL. Then again, I've used MySQL before and haven't had much problem with it whatsoever. Would it be worth learning PostgreSQL for this purpose? Java or .Net implementation (Preferably Mono, so I can use .Net while hosting the website using Apache). The reason for this is because, frankly, while I know PHP is a great platform to develop websites with, I hate developing with it. Before someone chimes in and flames me for saying that, note that I have nothing against the language, I just don't like it for my purposes. While Mono may be good to go with, I'm aware that ASP.Net MVC 3 hasn't been released for Mono yet, which may be a pain to work with, without their Razor syntax. Ontop of that, it seems Java is completely FULL of class libraries which deal with web development, that can be downloaded from the web. If anyone has any experience with these, I'd appreciate if that were posted. From what I've read about Spring and Struts2, they seem to be the best out there - especially since they're (AFAIK) MVC. I've considered Python and Django, which do seem REALLY nice, but I don't know much Python, and I'd rather start with something that I already know (language-wise; not framework-wise) than dive into learning a language AND a new framework. I'd REALLY like to be able to host my website via Apache, rather than using Windows Server or anything like that, as, frankly, I hate their setup. I'm not dissing it in any way, shape, or form, I'm just saying I dislike it. <3 terminal config. If there is a good reason to with Windows Server, however, I'd be willing to learn it. C# has a lot of things that Java appears not to have, including Delegates, unsigned types, and LINQ. Is there anything that Java has which can counter these?

  Read the article

• I can't start mysql in ubuntu 11.04

  - by shomid

  I downloaded following files of Oracle.com: MySQL-server-5.5.28-1.linux2.6.i386.rpm<br/> MySQL-client-5.5.28-1.linux2.6.i386.rpm<br/> MySQL-shared-5.5.28-1.linux2.6.i386.rpm<br/> then with "alien -i" command installing rpm packages and when starting mysql get following error: Starting MySQL<br/> .... * The server quit without updating PID file (/var/lib/mysql/omid-desktop.pid). error log: 121117 13:21:30 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121117 13:21:30 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist 121117 13:21:30 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121117 13:21:30 InnoDB: The InnoDB memory heap is disabled 121117 13:21:30 InnoDB: Mutexes and rw_locks use InnoDB's own implementation 121117 13:21:30 InnoDB: Compressed tables use zlib 1.2.3 121117 13:21:30 InnoDB: Using Linux native AIO 121117 13:21:30 InnoDB: Initializing buffer pool, size = 128.0M 121117 13:21:30 InnoDB: Completed initialization of buffer pool 121117 13:21:30 InnoDB: highest supported file format is Barracuda. 121117 13:21:30 InnoDB: Waiting for the background threads to start 121117 13:21:31 InnoDB: 1.1.8 started; log sequence number 1595675 121117 13:21:31 [Note] Recovering after a crash using mysql-bin 121117 13:21:31 [Note] Starting crash recovery... 121117 13:21:31 [Note] Crash recovery finished. 121117 13:21:31 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121117 13:21:31 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121117 13:21:31 [Note] Server socket created on IP: '0.0.0.0'. 121117 13:21:31 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 121117 13:21:31 mysqld_safe mysqld from pid file /var/lib/mysql/omid-desktop.pid ended 121117 13:25:38 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121117 13:25:38 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist 121117 13:25:38 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121117 13:25:38 InnoDB: The InnoDB memory heap is disabled 121117 13:25:38 InnoDB: Mutexes and rw_locks use InnoDB's own implementation 121117 13:25:38 InnoDB: Compressed tables use zlib 1.2.3 121117 13:25:38 InnoDB: Using Linux native AIO 121117 13:25:38 InnoDB: Initializing buffer pool, size = 128.0M 121117 13:25:38 InnoDB: Completed initialization of buffer pool 121117 13:25:38 InnoDB: highest supported file format is Barracuda. 121117 13:25:38 InnoDB: Waiting for the background threads to start 121117 13:25:39 InnoDB: 1.1.8 started; log sequence number 1595675 /usr/sbin/mysqld: Too many arguments (first extra is 'start'). Use --verbose --help to get a list of available options 121117 13:25:39 [ERROR] Aborting 121117 13:25:39 InnoDB: Starting shutdown... 121117 13:25:40 InnoDB: Shutdown completed; log sequence number 1595675 121117 13:25:40 [Note] /usr/sbin/mysqld: Shutdown complete

  Read the article

• How to Add Control Panel to “My Computer” in Windows 7 or Vista

  - by The Geek

  Back in the Windows XP days, you could easily add Control Panel to My Computer with a simple checkbox in the folder view settings. Windows 7 and Vista don’t make this quite as easy, but there’s still a way to get it back. To make this tweak, we’ll be doing a quick registry hack, but there’s a downloadable version provided as well. Manual Registry Tweak to Add Control Panel Open up regedit.exe through the start menu search or run box, and then browse down to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace Now that you’re there, you’ll need to right-click and create a new key… If you want to add the regular Control Panel view, with the categories, you’ll need to use one GUID as the name of the key. If you want the icon view instead, you can use the other key. Here they are: Category View:  {26EE0668-A00A-44D7-9371-BEB064C98683} Icon View: {21EC2020-3AEA-1069-A2DD-08002B30309D} Once you’re done, it should look like this: Now over in the Computer view, just hit the F5 key to refresh the panel, and you should see the new icon pop up in the list: Now when you click on the icon you’ll be taken to Control Panel. If you didn’t know how to change the view before, you can use the drop-down box on the right-hand side to switch between Category and icon view. Downloadable Registry Hack Rather than deal with manual registry editing, you can simply download the file, extract it, and then either double-click on the AddCategoryControlPanel.reg to add the Category view icon, or AddIconControlPanel.reg to add the other icon. There’s an uninstall script provided for each. Download ControlPanelMyComputer Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Disable User Account Control (UAC) the Easy Way on Win 7 or VistaHow To Figure Out Your PC’s Host Name From the Command PromptRestore Missing Desktop Icons in Windows 7 or VistaNew Vista Syntax for Opening Control Panel Items from the Command-lineAdd Registry Editor to Control Panel TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Getting Ramped for Silverlight 4

  - by GeekAgilistMercenary

  Here is a quick walk through of setting up your Silverlight 4 development environment.  The first assumed step is that you have Visual Studio 2010 already installed and any appropriate patches.  Then download the following in order and install each. Silverlight 4 Tools RC2 for Visual Studio and Silverlight 4 RTW Expression Blend 4 Release Candidate Silverlight Toolkit - Not necessary, but lots of good bits in this download. WCF RIA Services - This is also not necessary, but you should grab it just in case anyway. Once each of these are installed jump into Visual Studio 2010.  Start a new Silverlight 4 Project by going to File -> New -> Project -> and select the Silverlight Project Templates.  Here you'll see a new list of projects that are specific to the above listed downloads. Silverlight Business Application WCF RIA Service Class Library Silverlight Unit Test Application One way to confirm (and what I am going to display here in this entry) Silverlight 4 is installed ok is to select the Silverlight Application Template and start a new project. On the next screen you will see some of the standard options.  I always go with the ASP.NET MVC Option and with these new installations I am going to select Silverlight 4 (should be selected already) from the drop down and check the Enable WCF RIA Services check box. I also, for good measure, always create a unit test project for the ASP.NET MVC Project that will host the Silverlight Application Project.  When all is setup, the Solutions Explorer should look like what is shown below. Add the following code to the XAML of the MainPage.xaml of the Silverlight Project. <UserControl x:Class="Silverlight4.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400">   <Grid x:Name="LayoutRoot" Background="White"> <TextBlock x:Name="textBlockTest" Text="Hello World!" /> </Grid> </UserControl> Now execute the project, if all runs well you have installed Silverlight 4 successfully. Bam!  Silverlight 4 ready to go!  I will have more on Silverlight 4 very soon, as I will be starting a project (personal) and blogging it as I work through it.  Also, if you run into any issues I would like to read about them, so please comment.  I had a few issues and also had some design time rendering issues in the VS 2010 IDE when I installed these bits at first. Check out the original entry here.

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by Bruce Tierney

  The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• Listen to Local FM Radio in Windows 7 Media Center

  - by DigitalGeekery

  If you have a supported tuner card and connected FM antenna, you can listen to your favorite local over-the-air FM stations in Windows 7 Media Center. Before the FM radio option will be available in Windows Media Center, you’ll need to have a TV or Radio tuner card installed and configured. If you have a TV tuner card installed, you may already have a Radio tuner as well. Many TV tuner cards also have built in FM tuners. Open Windows Media Center, scroll the “Music” and over to “Radio.” Click on “FM Radio.”   The radio will turn on and you’ll see the current station number listed in the white box. Just below are standard “Seek” and “Tune” buttons, as well as “Preset” options. Tuning works just like a typical FM radio. Click on the (-) or (+) buttons to “Tune” or “Seek” up and down the dial. If you already know the frequency of the station, enter the numbers using the numeric keypad on the remote control or keyboard. To save the current station you’re listening to as a preset, click on the “Save as Preset” button. Type in a custom name for your preset station and click “Save.”   Once you set your presets, they will also be available on the main FM Radio screen. The transport controls at the bottom of the screen also allow you to control Volume, Pause, Play, Skip back, and Skip forward. Fast Forward and Rewind, however, are not supported.   This is a nice option if you’d like to listen to your local FM favorites on your computer, especially if those stations aren’t available online. If you don’t have an FM tuner and want to listen to thousands of online radio streams, check out our article on RadioTime in WMC. Similar Articles Productive Geek Tips Listen to Over 100,000 Radio Stations in Windows Media CenterListen To XM Radio with Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Schedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• NYC Silverlight FireStarter - June 5th 2010 at the NYC Microsoft Office

  - by Sam Abraham

  On Saturday June 5th, 2010, I spent my Saturday morning at the NYC Silverlight FireStarter. Presenting was Peter Laudati from Microsoft and Jason Beres, Matt Van Horn and Todd Snyder from Infragistics. I watched the Simulcast for the morning sessions as I was tied up with some work, but ended up finally making it to the Microsoft Office and had the opportunity to attend the last hour of the event in person.   For me, the quality of the Simulcast was as good as in-person attendance so far as sound/video quality and the interaction with speakers. In the background was a screen with tweets from remote attendees asking questions or commenting on the presentations. Presenters did periodically stop to answer the tweeted questions as well as questions from attendees. Only thing I missed was getting my hands on some of that swag that was (literally) flying in the air at the event floor.   Upon my arrival at the Microsoft Office Location in NYC, I spoke with Rachel Appel and Peter Laudati asking for permission to take a few photos to record the outstanding effort that took place in putting this event together. Both agreed and I started with putting my photography skills to work.   You can always gauge the quality of an event with the number of its attendees who opt to stay till the last minute as well as the level of interaction of the audience with the speaker. With most of the FireStarter attendees remaining till the very end of the talk, and with the many questions that were asked, one can simply judge the event as a success as per my aforementioned criteria.   Evaluation forms were passed around and Peter strongly encouraged the audience to openly speak their mind as they record their comments. I didn't get to submit my evaluation as I was busy recording the event in photos, so here it goes: I believe that lots of hard work was put into making this event a reality. Quality of speakers, topics and level of Geekiness at the event was outstanding.  Overall, aside from a minor issue with Lunch delivery time, this event was of high quality and I am very sure everyone's evaluation will be in line with my analysis of it being a great success. Below are a few photos of the event.   --Sam Abraham Site Director - West Palm Beach .Net User Group www.Fladotnet.com     NYC Silverlight FireStarter Speakers - From Left to right: Peter Laudati, Todd Snyder, Matt Van Horn & Jason Beres   As jason wasn't quiet visible in the above photo, a closeup was taken (It was Jason's birthday and he had to leave a bit early, so the Infagisticts team thought outside the box...)     Full Room - That was at the last hour of the event   Another view of full room   Discussions during the break   End-of-event Raffle

  Read the article

• The best Bar on the globe is ... in Seoul/Korea

  - by Mike Dietrich

  As you know already sometimes I write about things which really don't have to do anything with a database upgrade. So if you are looking for tips and tricks and articles about that topic please stop reading now Actually I'm not a lets-go-to-a-bar person. I enjoy good food and a fine dessert wine afterwards. But last week in Seoul/Korea Ryan, our local host, did ask us after a wonderful dinner at a Korean Barbecue place if we'd like to visit a bar. I was really tired as I flew into Seoul overnight from Sunday to Monday arriving Monday early morning, getting shower, breakfast - and then a full day of very good and productive customer meetings. But one thing Ryan mentioned catched my immediate attention: The owner of the bar collects records and has a huge tube amp stereo system - and you can ask him to play your favorite songs. The bar is called "Peter, Paul and Mary" - honestly not my favorite style of music. And I even coulnd't find a webpage or an address - only that little piece of information on Facebook. But after stepping down the stairs to the cellar my eyes almost poped out of my head. This is the audio system: Enourmus huge corner horn loudspeakers from Western Electric. Pretty old I'd suppose but delivering an incredible present dynamics into the room. And plenty of tube equipment from Jadis, NSA Labs and Shindo Laboratories Western Electric 300B Limited amps from Tokyo. And the owner (I was so amazed I had simply forgotten to ask for his name) collects records since 40 years. And we had many wishes that night. Actually when we did enter Peter, Paul and Mary he played an old Helloween song. That must have been destiny. A German entering a bar in Korea and the owner is playing an old song by one of Germany's best heavy metal bands ever. And it went on with the Doors, Rainbow's Stargazer, Scorpions, later Deep Purple's Perfect Strangers, a bit of Santana, Carly Simon, Jimi Hendrix, David Bowie ...Ronnie James Dio's Holy Diver, Gary Moore, Peter Gabriel's San Jacinto ... and many many more great songs ... Of course we were the last guests leaving the place at 2am in the morning - and I've never ever had a better night in a bar before ... I could have stayed days listening to so many records  ... Thanks Ryan, that was a phantastic night! -Mike

  Read the article

• Should I be looking for an alternative to Zen Cart as my business grows?

  - by MarkS

  I created a business website for a family business which is growing. It's my family, and I'm a software developer, but I don't want to rebuild the wheels or be a shopping cart programmer. For this business, I need the web store to "just work", but... it gets complicated... There are two parts of this business website. One of them is driven by Wordpress and I use the awesome Thesis theme. This is modern, flexible, and saves me a lot of time from doing custom coding and styling. I couldn't be more pleased with this arrangement. The other part of the site is a Zen Cart store. It's administration and it's flexibility is frustrating and archaic Web 1.0. For the past few years, I keep hearing that the developers are working on a 2.0 version of Zen Cart, but they haven't communicated anything significant in the past few years other than to say, "When it's ready, we'll let you know." What I'm looking for in a cart, I would need to install 6-10 additional mods, and would need to do a lot of custom coding. I'm now willing to pay for a top-notch e-commerce solution for a small business that we can grow up into a larger business over time. Requirements: Extremely flexible shipping that let's us set up rules per product/category, tables of rates, calculated rates, max package weighs, etc. (flexibility like that available with CEON Advance Shipping Module for Zen Cart Coupons and gift certificates Manual order entry for phone orders Multi-channel support (We also sell on Amazon, eBay, use Google Base and we want to maintain one set of inventory and have it kept current) Decent SEO features Reviews and star-ratings on products Easy social networking features for sharing, following, liking, etc) Easy integration with AdWords and analytics tracking Modern and very usable product and store administration (Like I was saying, I'm spoiled by Wordpress and Thesis) At the end of the day, I don't care if it's a hosted solution or if I have to host it myself. I just want something that is going to stay up-to-date, regularly be maintained and improved, and if I have to update it, things like the one-click update present in Wordpress is something it has to have. Professional Webmasters, if you had to run a store / website, but you had to spend your time focusing on your sales and marketing efforts rather than diffing php files and copying and tweaking them to change even the slightest details of your site, what would you choose?

  Read the article

• JavaScript in different browsers

  - by PointsToShare

  Adventures with JavaScript rendered in IE 8, Chrome 15, and Firefox 8.0 I have written a little monogram about the advantages of Math and wrote a few JavaScript applications to demonstrate them. I was a bit careless and used elements on the page in my JavaScript without using any of the GetElementsByXXXX methods to identify them.  Say I had a text box named tbSeqNum into which I entered a number to be used in a computation. In my code I simply referred to its value by using it directly. Like here: Function Blah() {                 return tbSeqNum.value; } This ran fine in IE8. In IE, the elements are available as global variables. This is not the case in either Firefox or Chrome. In there one has to create the variable and only then use it. Assuming I also used tbSeqNum as the element’s ID, this works: Function Blah() {                 return GetElementById(“tbSeqNum”).value; } Naturally this corrected function also works in IE, so be warned. Also, coming from windows programming (I am long in the tooth and programmed long before the internet), I have a habit of putting an “Exit” button on my pages and setting their onclick to: onclick=”window.close()”. Again, this works fine in IE. In Firefox and chrome, it does not! There you can only close a window that you opened in the code. A window that was opened by navigation to a URL will not close.  Before I deployed mu code to my website, I painfully removed all my Exit buttons. But my greatest surprise came when I tested my pages in the various browsers. In my code I do a comparison on the performance of two algorithms used to solve the same problem. One is brute force, the other uses a mathematical formula. The compare functions runs each many times and displays the time it took for each and also the ratio. Chrome runs JavaScript between 5 and 10 times faster than Firefox and between 50 and 100 times faster that IE. Wow!!! This difference is especially remarkable when the code uses iteration. I suspect that the JS engines in Chrome and Firefox simply cache the result of a function and if it is called again with the same parameters, it returns the cached result. To see it in action play run the “How Many Squares” page in www.mgsltns.com/games.htm The host is running on Unix, so the link is case sensitive. Last Note: IE9 runs JS a bit faster, but still lags behind almost as badly. That’s All Folks!

  Read the article

• How do you keep code with continuations/callbacks readable?

  - by Heinzi

  Summary: Are there some well-established best-practice patterns that I can follow to keep my code readable in spite of using asynchronous code and callbacks? I'm using a JavaScript library that does a lot of stuff asynchronously and heavily relies on callbacks. It seems that writing a simple "load A, load B, ..." method becomes quite complicated and hard to follow using this pattern. Let me give a (contrived) example. Let's say I want to load a bunch of images (asynchronously) from a remote web server. In C#/async, I'd write something like this: disableStartButton(); foreach (myData in myRepository) { var result = await LoadImageAsync("http://my/server/GetImage?" + myData.Id); if (result.Success) { myData.Image = result.Data; } else { write("error loading Image " + myData.Id); return; } } write("success"); enableStartButton(); The code layout follows the "flow of events": First, the start button is disabled, then the images are loaded (await ensures that the UI stays responsive) and then the start button is enabled again. In JavaScript, using callbacks, I came up with this: disableStartButton(); var count = myRepository.length; function loadImage(i) { if (i >= count) { write("success"); enableStartButton(); return; } myData = myRepository[i]; LoadImageAsync("http://my/server/GetImage?" + myData.Id, function(success, data) { if (success) { myData.Image = data; } else { write("error loading image " + myData.Id); return; } loadImage(i+1); } ); } loadImage(0); I think the drawbacks are obvious: I had to rework the loop into a recursive call, the code that's supposed to be executed in the end is somewhere in the middle of the function, the code starting the download (loadImage(0)) is at the very bottom, and it's generally much harder to read and follow. It's ugly and I don't like it. I'm sure that I'm not the first one to encounter this problem, so my question is: Are there some well-established best-practice patterns that I can follow to keep my code readable in spite of using asynchronous code and callbacks?

  Read the article

• Solaris Tips : Assembler, Format, File Descriptors, Ciphers & Mount Points

  - by Giri Mandalika

  .roundedcorner { border:1px solid #a1a1a1; padding:10px 40px; border-radius:25px; } .boxshadow { padding:10px 40px; box-shadow: 10px 10px 5px #888888; } 1. Most Oracle software installers need assembler Assembler (as) is not installed by default on Solaris 11.      Find and install eg., # pkg search assembler INDEX ACTION VALUE PACKAGE pkg.fmri set solaris/developer/assembler pkg:/developer/[email protected] # pkg install pkg:/developer/assembler Assembler binary used to be under /usr/ccs/bin directory on Solaris 10 and prior versions.      There is no /usr/ccs/bin on Solaris 11. Contents were moved to /usr/bin 2. Non-interactive retrieval of the entire list of disks that format reports If the format utility cannot show the entire list of disks in a single screen on stdout, it shows some and prompts user to - hit space for more or s to select - to move to the next screen to show few more disks. Run the following command(s) to retrieve the entire list of disks in a single shot. format 3. Finding system wide file descriptors/handles in use Run the following kstat command as any user (privileged or non-privileged). kstat -n file_cache -s buf_inuse Going through /proc (process filesystem) is less efficient and may lead to inaccurate results due to the inclusion of duplicate file handles. 4. ssh connection to a Solaris 11 host fails with error Couldn't agree a client-to-server cipher (available: aes128-ctr,aes192-ctr,aes256-ctr,arcfour128,arcfour256,arcfour) Solution: add 3des-cbc to the list of accepted ciphers to sshd configuration file. Steps: Append the following line to /etc/ssh/sshd_config Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour128,arcfour256,\ arcfour,3des-cbc Restart ssh daemon svcadm -v restart ssh 5. UFS: Finding the last mount point for a device fsck utility reports the last mountpoint on which the filesystem was mounted (it won't show the mount options though). The filesystem should be unmounted when running fsck. eg., # fsck -n /dev/dsk/c0t5000CCA0162F7BC0d0s6 ** /dev/rdsk/c0t5000CCA0162F7BC0d0s6 (NO WRITE) ** Last Mounted on /export/oracle ** Phase 1 - Check Blocks and Sizes ... ...

  Read the article

< Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >