Search Results

Search found 42302 results on 1693 pages for 'start screen'.

Page 621/1693 | < Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >

• Computer keeps restarting [closed]

  - by Joris

  I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

  Read the article

• Newly compiled (patched with -ck) 3.3 kernel won't boot up

  - by Shiki

  Screen is garbled. Reaaaally garbled. Like some sort of scrambling image from a movie. I can upload some pictures if needed. To be short with the description. Here is my 3.3 + ck .config file: http://pastebin.com/aP2F9RcH The dmesg log of the failed kernel: http://pastebin.com/esc2Rtka The computer is a ThinkPad T500 laptop. I have selected everything needed for the computer (as far as I can tell, but check the .config). The normal generic Ubuntu kernel boots and works perfect!

  Read the article

• Windows 7 doesnt boot after installing Ubuntu 12.10 (Asus Zenbook Prime / UEFI problem)

  - by jpdus

  Today I installed Ubuntu and since then i cannot boot into Windows anymore. I used the "standard" option (didnt change any partitions manually, just entered the size) but used the UEFI-mode. At first the GRUB entries for Windows did not work at all, after reading this thead i was able to add a new Grub entry - now i can get into the "windows-loading" screen for a few seconds but then i always see some kind of bluescreen for a fraction of a second and the laptop reboots. I can get into the windows recovery partition but the only option there is to reset everything to factory settings (+erase all data). I have no idea how to get into the Windows 7 repair mode which was mentioned here (tried everything else in this thread too - no success). My boot info can be found here: http://paste.ubuntu.com/1411573/ I have no idea what went wrong (there is even an extra page for the Zenbook Prime where no installation problems are mentioned). I would appreciate any help/ideas, many thanks!

  Read the article

• 12.10 Unity doesn't appear when using Nvidia drivers

  - by Torben Gundtofte-Bruun

  I've just installed 12.10 from scratch. Unity also started okay, but in a poor resolution. I found a setting (I think it was in "software sources") to change the display driver to Nvidia, and then I rebooted. When Ubuntu now starts, it goes to the desktop (I see a file that I saved to the desktop) but there are no other screen elements -- no Unity, no menu bar at the top, no window decoration, nothing. Ctrl-Alt-T and Ctrl-Alt-F2 work as they should, but it's kinda limiting... How can I restore the default driver? I guess I need a way to open those "software sources" settings again - or anything else that could fix it! I hope I don't have to type all this by hand. How can I install a proper Nvidia driver so that I can get up to 1280x1024? My old tricks don't seem to work, but perhaps they might if I solve #1...

  Read the article

• How do you dual boot Windows 7/8 seperatly with GRUB?

  - by Aaron

  I installed the beta version of Windows 8 and re-installed GRUB. When I boot my computer and select Windows 7, I get the new Windows 8 booting screen asking to boot between either Windows 7 or 8. If I choose Windows 7, my computer then restarts and I have to select Windows 7 again in order to boot into 7. But if I choose Windows 8 it boots right up. I understand I can choose which OS to boot by default, but I want my GRUB options to be the only way to choose between OS's. So my question is, how can I set this up so that when I click on Windows 7, I go there, and when I select Windows 8, I boot 8?

  Read the article

• Tool Review: Telerik JustDecompile

  - by Sam Abraham

  In the next few lines, I will be providing a brief review of Telerik’s JustDecompile, a free .Net decompiler and assembly browser. In using Telerik’s 2012 Q3 JustDecompile release, one can see many great features.  First off, I loved the built-in options for loading .Net assemblies automatically using the Open->Load Framework menu option. Other options enable loading assemblies from GAC, XAP URL or locally from disk. The ability to create an “Assembly List” is quiet handy for grouping and saving a “List” of DLLs to load. All loaded assemblies are shown in the left panel of a split-panel screen. Clicking an assembly expands all namespaces within. Drilling further to class level displays the actual source code in the right panel in either IL, C# or Visual Basic. In conclusion, JustDecompile has grown and quickly matured into an indispensible handy tool for us developers. Telerik’s effort in maintaining and updating JustDecompile as well as the company’s commitment to keeping it free is much appreciated and valued.

  Read the article

• Ubuntu 13.10 upgrade error. Dropping to low graphics mode

  - by aero31aero

  I was updating from the terminal and it was complete. It asked me if I would like to reboot now. I accidentally pressed 't' instead of 'y' and then it just asked me to reboot manually. Then I rebooted using sudo shutdown now -r And on reboot, the system flashed the "low graphics mode" error screen and its stuck there. I have 13.10 live-USB with me. Is there any way I can get my system to boot normally? I'm not willing to do a fresh install as I had installed several other packages. Another question: is there any diff if I drop into terminal using Alt+Ctrl+F1 or if I use chroot from a live session?

  Read the article

• Installing 12.10 messed up Xorg

  - by Ghost

  So I finally decided to upgrade from 12.04 and now my ubuntu install has been rendered unusable. I'm getting the "no screens detected" error from xorg in the console, and no mattr how many times I reinstall it xorg keeps throwing the same errors. I already had to do a bunch of hacks like nomodeset just to get to the console, else I would get an infinite tabulator after the purple boot screen. The machine has a 4200HD IGP, I even tried installing fglrx legacy (4xxx series and below are not supported in regular fglrx anymore) which was a subpar driver in 12.04 but in hopes that the machine would at least work, but nope, nothing at all. Anyone had the same problem? how do I fix it? EDIT: just wanted to add that I upgraded to 13.04 and it didn't solve anything, in fact it might have broken things even further.

  Read the article

• Publishing Websites From VS.NET 2013 to Azure

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/10/24/154459.aspxScott Gu recently announced the release of the Azure SDK 2.2. This includes a tonne of new features for accessing Azure resources from within Visual Studio 2013. You can read Scott’s blog post here. One feature is integrated Windows Azure sign in from within Visual Studio. I put a short video together showing how easy it is to publish a web application to Azure Websites. You can check it out here: http://youtu.be/eiuhJbwhZsQ (I couldn’t get it to display properly by embedding, definitely needs the wide-screen 720p view for best viewing) And yes, you can access James Chambers Karaoke Fansite live on Azure! Resources: Azure SDK 2.2 https://www.windowsazure.com/en-us/develop/net/ VS.NET 2013 Express http://www.microsoft.com/visualstudio/eng/downloads#d-2013-express

  Read the article

• Restoring MBR, partition table, and boot sector of memory card without data loss ("USBC")

  - by Synetech

  Abstract I have a FAT32 memory card that when inserted into a computer causes Windows to prompt to format it. The card is definitely not supposed to be blank and has a bunch of files on it. Symptoms Using a hex-editor/disk-viewer, I examined the card and found that several sectors/clusters have been overwritten with something that has a signature of USBC at the start of the sector. Specifically, the master boot record (and partition table) is gone (hence Windows thinking the card is blank and needing to be formatted), as are the boot sectors (they have the USBC signature and a volume label of NO NAME and partition type of FAT32). Fortunately, it looks like both copies of the FAT are almost entirely intact (a few FAT entries at the start of a cluster here and there seem to be overwritten by USBC). The root directory is also nearly intact—I can see the volume label entry and subdirectory listings, but one sector is overwritten. (There are no more instances of USBC after the last one in the FAT2.) Hypothesis These observations seem to indicate some sort of virus that erases a few key filesystem structures, and then overwrites a few extra sectors here and there. Googling it seems to corroborate the idea of a virus, except that others report a file called USBC which does not apply here, and in fact, could not be possible since there is no filesystem to even see files. I cannot find any information about a virus with these symptoms, nor a removal tool. (I can't help but wonder if it is actually due to an autorun virus prevention tool.) Question I can likely fix the FAT corruption since they are mostly contiguous chains and maybe even the lost sector of the root directory, but does anyone know of a convenient way to restore or (re)create the MBR/partition table and boot sectors (without formatting or overwriting the data)?

  Read the article

• How do I cancel windows server 2003 repair install?

  - by Kilgore2k

  System: Windows 2003 Server Enterprise Scenario: NTDS db is corrupt and all attempts to fix with esentutl fail. Ran chkdsk which seemed to repair disk error and give access to the ntds.dit file but still esentutl fails. (Attached the drive to a different server to run the esentutl) Error: Access to source database '[path to copy of]/ntds.dit' failed with Jet error -1022. Operation terminated with error -1022 (JET_errDiskIO, Disk IO error) after 0.170 seconds. This error occurs on any disk I cpoy the files to including original location in C:\WINDOWS\NTDS\ Now enter the "Stupid!" and "what was I thinking!?" part (must be the late hour...) Stupid: No updated backup - after using a backup I get a network password error in the lsass error. what was I thinking!?: Started the install repair from the original CD but the install fails since the AD fails to start. Now I cant boot into any mode (safe mode, AD restore etc) nor complete the repair install. I would really like to avoid a fresh install since I have the Exchange server on this DC and would rather migrate to a new server than have to start from scratch. Thanks!

  Read the article

• Failed to load session "ubuntu"

  - by harsh

  I installed CCSM to enable window previews in Unity. But when I went into extras, there was no 'window preview' option. So I tried experimenting with other options in Compiz and now there are no borders in the dialogue boxes (close, minimize, restore buttons are not there, I had enabled some 'flat....' option in Compiz. Later, I uninstalled Compiz and then reinstalled it. Now it says "Failed to load session Ubuntu" I can't even access through the guest account, I am new to Ubuntu.(please explain in detail). All I have access to is the login screen (it still shows my custom wallpaper). Please help, I don't want to lose my stuff.

  Read the article

• problem booting wubi. Panic occuerd

  - by Scott

  This is the first time I tried Ubuntu. I downloaded the Wubi so I can try it and still have the Windows XP Pro. I ran the install after that it said to rebot so I did. Then I was asked if I wanted to run windows or ubuntu I selected ubuntu. Some code flashed by it went to the ubuntu logo screen. Then some more code and it stops with the code. 73.928015 Panic occured, switching back to text console I have tried it three times and it stops in the same place and won't go any further. Anybody no wants wrong with it?

  Read the article

• Can't decrease/increase brightness on SAMSUNG NP300V3A more than 1 step

  - by Žygis

  I just installed Oneiric on a SAMSUNG NP300V3A (Series 3) laptop. Everything seems to work fine more or less except one thing: I can't reduce screen brightness more than 10% or so. Fn+F3 (brightness up) sets brightness to 100% and Fn+F2 (brightness down) sets it to about 90% or so. No matter how many more times I press it, it doesn't fall below that. For a video card I have an integrated Intel HD Graphics 3000 chipset, but that's probably unrelated to the issue. What can I do to solve this?

  Read the article

• Function keys and Hot are switched

  - by Brian

  I recently got a new laptop and installed 12.10 on it. I noticed right away that the "hot keys" on the F keys didn't always do what was pictured and also I noticed that the "hot keys" and the function keys were reversed. e.g. to close a window I have to hit alt-fn-F2 instead of just alt-F2. This is pretty annoying because I've been using the same keyboard shortcuts for years and I don't really want to have to re-learn them. I would also like to switch what the hot keys do, for example the F3 key is pictured as increase screen brightness but it really puts the computer to sleep. I would like to change this back to increase the brightness I looked in keyboard shortcuts settings but these options are not in there. I also downloaded gconf-editor but was unable to find where to change the shortcuts on it. (they weren't at apps \ metacity \ keybinding_commands like others described) any help would be greatly appreciated

  Read the article

• What steps should be taken to make sure your software is usable by disabled people?

  - by Cromulent

  I want to make sure a piece of software I am writing is usable by people with various disabilities such as blindness and an inability to use a mouse and / or keyboard. Unfortunately I have no experience with things such as screen readers or other methods that disabled people use to make using a computer easier / possible. I've never really had much experience with disabilities at all and unfortunately I don't know any disabled people who I can ask. I was wondering what other people do to make sure that their software is available to a wide range of people with varying abilities? This seems to be a subject matter that is often ignored by developers and I think it is a real shame.

  Read the article

• Desktop background will not load after performing aticonfig --adapter=all --ovt=opengl

  - by user1571959

  I am trying to get Eagle to work on ubuntu 14.04 LTS. When I run Eagle and open a schematic the display is not refreshing/redrawing correctly. One solution that I found was to install the flgrx drivers and do the aticonfig command to use opengl... So I did and rebooted. Now when I turn on my laptop I get all the way to the login screen, login, and then nothing happens, it just goes to the background image with no icons or anything... I tried deleting and copying the original xorg.conf file and no results... What do I do other than reinstalling Ubuntu? is there anyway to force the original driver?

  Read the article

• How To Delete Your Skype Call and Chat History

  - by Gopinath

  Just like every other modern application, Skype also records all the communications we exchange using it. It records instant messages, calls, file transfers, SMS, etc. and makes it easy to view using the Conversation tab. If you ever feel like getting rid of these history information, then you need to delete them. Skype provides a single click option to clear all the history from you account, but the feature is buried deep under options menu.Really deep!. To clear history follow the menu Tools –> Options, switch to Privacy Settings tab available on the left side, click on Show advanced options button and finally hit the button Clear history. Ah! You are almost done. Just confirm a popup it displays on screen and your history is vanished from your account. Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Circle physics and collision using vectors

  - by Joe Hearty

  This is a problem I've been having, When making a set number of filled circles at random locations on a JPanel and applying a gravity (a negative change in the y), each of the circles collide. I want them to have collision detection and push in the opposite direction using vectors but I don't know how to apply that to my scenario could someone help? public void drawballs(Graphics g){ g.setColor (Color.white); //displays circles for(int i = 0; i<xlocationofcircles.length-1; i++){ g.fillOval( (int) xlocationofcircles[i], (int) (ylocationofcircles[i]) ,16 ,16 ); ylocationofcircles[i]+=.2; //gravity if(ylocationofcircles[i] > 550) //stops gravity at bottom of screen ylocationofcircles[i]-=.2; //Check distance between circles(i think..) float distance =(xlocationofcircles[i+1]-xlocationofcircles[i]) + (ylocationofcircles[i+1]-xlocationofcircles[i]); if( Math.sqrt(distance) <16) ...

  Read the article

• Google accidentally revealed Nexus 5 phone in Android Kitkat launch video

  - by Gopinath

  Today Google officially announced KitKat as the name of the next version of Android OS(v4.4). They posted a video to showcase the unveiling of the KitKat statue at the company’s headquarters, but they accidentally revealed much more. 9to5Google spotted an unreleased Android smartphone in the video and they posted screen grabs of Googlers using it to take photos. This unreleased phone could be the next version of Google Nexus phone. Google few days ago reduced price of Nexus 4 smartphones by $100 and 8 GB version is reported out of inventory. With all these signs it seems to be clear that it is just weeks away for the launch of Google Nexus smartphone. Soon after the news of leaked smartphone spread on blogs, Google pulled Kitkat launch video to private. But few bloggers managed to save a copy of the video and uploaded to other video sharing websites. Check the embedded video

  Read the article

• Restoring Grub after Kubuntu installation

  - by justquestions

  I installed Kubuntu on top of my existing Ubuntu 12.04 (64 bit) installation. During Kubuntu installation, I chose lightdm as my default display manager (instead of kdm). Now after rebooting, the Grub has a new color (gray instead of default purplish) and the screen while booting is gray (instead of purplish). I am curious if it is possible to change this grub behavior without removing Kubuntu. I did find a lot of discussion about modifying grub themes but they were not very useful because I do not know what is the default unity grub theme. I did reinstall grub but it didn't change anything. I tried the Grub Customizer but couldn't succeed. Thanks in advance!

  Read the article

• On-line Based Conferencing For Admin Panel

  - by Tim Marshall

  Working on my admin panels work station section which will allow the admin to use simple office tools such as word editors, calculators and whatnot. Under this section of the admin panel, I would like to add a conferencing feature which will allow any administrator to connect with another administrator 1-2-1 under the 1-2-1 Conferencing section, or to join a meeting under 'live meeting' section. Upon my search for on-line based, I found there are all these, what seem to be great applications out there, however not all of them are on-line based, and come with a price! I would like to a purely on-line based conferencing/meeting/1-2-1 feature which will allow administrators to communicate via text or sound, stream their video, share their screen and sending of files. I know this sounds like a big feature, and I am not asking for someone to answer by programming one for my website! Does anyone know my best solution to progress to having this feature on my website, any tutorials or free to use, free to modify web plugins? Thank you for your help, Best Regards, Tim

  Read the article

• Change administrator username

  - by Fazlan

  I have accidentally typed my name wrong when I created the administrator account. Although I managed to change the user name at the login screen, I am unable to rename the /home/oldusername to /home/newusername. I tried most of the online tutorials, and it failed. The code I tried was this: usermod -l newusername -m -d /home/newusername oldusername But the output is: cannot lock /etc/passwd; try again later. How can I fix the issue and change the folder to newusername and expect all the applications to work as before?

  Read the article

• Displaying a grid based map using C++ and sdl

  - by user15386

  I am trying to create a roguelike game using c++ and SDL. However, I am having trouble getting it to display the map, which is represented by a 2d array of a tile class. Currently, my code is this: for (int y = 0; y!=MAPHEIGHT; y++) { for (int x = 0; x!=MAPWIDTH 1; x++) { apply_surface( x * TILEWIDTH, y * TILEHEIGHT, mymap[x][y].image, screen ); } } However, running this code causes it to both dither for a while before opening the SDL window, and (usually) tell me there is an access violation. How can I display my map?

  Read the article

• Visual Studio 2010 - Faster Startup with /nosplash

  - by MikeParks

  I read a blog the other day about the /nosplash switch in Visual Studio. Apparently, it's been around a while and I'm a little late on finding out about it. I figured I'd share it for those of you that come across this and didn't know about it as well. Basically all it does is turn off the Visual Studio splash screen which speeds up initial startup time. It's not a big difference but every little bit helps. I choose speed over looks. You can set the switch by right clicking on Visual Studio, selecting Properties, and adding "/nosplash" on the target Property, so it will look like this: "C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe" /nosplash. Feel free to try it out and see if you like it. You can always change it back by just removing the /nosplash switch when you're done testing. There are plenty more Visual Studio switches out there but this is the main one that came in handy for me.   - Mike

  Read the article

< Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >