Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 622/1834 | < Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629  | Next Page >

• why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

  - by Gert

  I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

  Read the article

• How to correctly set up iWARP? Preferably on loopback

  - by ajdecon

  iWARP is a protocol for doing remote direct memory access (RDMA) on top of TCP/IP, so that it can work with Ethernet and other network types as opposed to Infiniband. It works with many of the standard IB interfaces - the IB verbs, for example - so it's all pretty transparent. I'm doing some IB-verbs programming (mostly for the sake of learning about how they work better), and it'd be wonderfully convenient for me if I could use iWARP to do RDMA over my loopback interface, so that I could test some of my code without getting on our IB-connected cluster. :-) But I cannot figure out how to get a "local development environment" set up: there are no tutorials I'm aware of for even setting up iWARP from scratch on a server or a network interface. Can anyone give me a tutorial or point me in the right direction? Environment is Fedora 16 running in VirtualBox.

  Read the article

• VLC RTP Streaming in FC12

  - by Matt D

  I'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora. I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else. Does anyone know of a solution to this issue?

  Read the article

• Which prediction model for web page recommendation?

  - by Nilesh

  I am trying to implement a web page recommendation wherein registered users will be given a recommendation of which page to visit depending upon the previous data.So with initial study I decided to go on with clustering the data with rough sets and then will move forward to find out the sequential patters with the use of prefix span algorithm.So now I want to have a better prediction model in place which can predict the access frequency of pages.I have figured out with Markov model but still some more suggestions will be valuable.Also please help me with some references of the models too.Is it possible to directly predict the next page access with the result of PrefixSpan.If so how?

  Read the article

• cannot boot Ubuntu after removing packages?

  - by Ayman

  I have problem now with booting into Ubuntu because I removed some packages from package manager and its dependencies by mistake. After I saw desktop removing applications one by one and the theme starting to disappear. After I tried to restart the login, I tried to fix it usinh recovery mode but it's not working. I am sure there are important packages removed, the problem is that I have no backup for my files .. Also, I need my firefox stored passwords. , I tried to boot to Ubuntu live CD but files encrypted in home folder and no access to it !! is there away to access it ?

  Read the article

• Issues connecting to WPA2 with User Authentication Mavericks?

  - by heinst

  I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

  Read the article

• "Play on another device" function not working with Samsung Allshare

  - by Tural Teyyuboglu

  Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

  Read the article

• How to make custom libraries accessible?

  - by Milen Bilyanov

  I am trying to compile and install every custom module under it's own designated folder. (ex: /myApps/myLinux/compiled_app) I had luck with python so far, where my python is compiled from source and lives in: /myApps/myLinux/python2.5 and "python2.5" - /myApps/myLinux/python2.5.6-gcc463 so I can access this python through a wrapper script that sets the right environment. The question is recently I had to compile and add something called gperf3.0.4. So now it lives: /myApps/myLinux/gperf3.0 and "gperf3.0" - /myApps/myLinux/gperf3.0.4-gcc463 The question is: How will I point to this lib if some other app needs to access it? Is it done through the LD_LIBRARY_PATH variable? Thanks.

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• Simple NAT router for ESX

  - by Evan M.

  Hi Guys, I'm looking for a simple virtual appliance that I can deploy to my ESX environment to use as a virtual NAT router / firewall to create an isolated network that I can easily give internet access too. Basic setup: ESX Host, has 2 vswitches configured: 1 is connected to the physical LAN, the other is isolated. I need an appliance that I can add 2 vNICs to, and attach one to the isolated vSwitch, the other to the LAN, to give the isolated network outbound access (so it can reach the internet). Anyone have an appliance that I can setup quickly to do so? Thanks.

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• NAT and ISP Subnet when load balancing on pfsense?

  - by dannymcc

  I have a pfsense box that I'm trying to plan the configuration for. I am going to be load balancing two ISP's, each with their own /29 static IP subnet. The question I have is in relation to the way those IP's are associated with workstations on the local network. Currently I have some workstations with local (192.168.1.0/29) IP addresses, and other more complicated workstation setups have their own public IP address. Some of the more complicated systems have a NAT 1:1 configuration where I forward a public IP address to a local IP address. Others however are directly on the ISP subnet and cannot be seen on our local network. Is this configuration possible with pfsense? If so, what terms should I be looking through the documentation for? Here is a simple/brief diagram of what I am trying to achieve.

  Read the article

• Windows 7 - Remote Desktop - multiple credentials

  - by w--

  My home network consists of a couple Windows XP machines and a Windows 7 box. One of the Windows XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, I just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In Windows 7, it seems to store credentials for a box based on machine name. I.e. I can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In Windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box?

  Read the article

• ArchBeat Link-o-Rama for 2012-09-25

  - by Bob Rhubart

  Oracle 11gR2 RAC on Software Defined Network (SDN) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. ServerSent-Events on WebLogic Server | Steve Buttons "The HTML5 ServerSent-Event model provides a mechanism to allow browser clients to establish a uni-directional communication path to a server, where the server is then able to push messages to the browser at any point in time," explains Steve "Buttso" Buttons. Focus on Architects and Architecture This handy guide for sessions and other activities at Oracle OpenWorld 2012 focuses on IT architecture in all its many facets and permutations. Operating System Set-up for WebLogic Server | Rene van Wijk Oracle ACE Rene van Wijk shows you how to set-up an operating system for WebLogic Server. "We will use VMware as our virtualization platform and use CentOS as the operating system," says van Wijk. "We end the post by showing how the operating system can be tuned when running a Java process such as WebLogic Server." Free eBook: Oracle SOA Suite - In the Customer's Words If you find yourself in the position of having to sell the idea of Service-oriented Architecture to business stakeholders this free e-book may come in very handy. Check out "Oracle SOA Suite: In the Customer's Words. (Registration / Oracle.com login required.) Thought for the Day "The first rule of any technology used in a business is that automation applied to an efficient operation will magnify the efficiency. The second is that automation applied to an inefficient operation will magnify the inefficiency." — Bill Gates Source: BrainyQuote.com

  Read the article

• Red Hat Extends Linux Subscriptions to Cloud Computing

  Red Hat Cloud Access extends Linux subscription model for cloud computing deployments on Amazon EC2.

  Read the article

• Naming your website longname.com vs shortcatchy.net vs shortcatchy.info

  - by jskye

  I'm designing a website that will basically be a social network for sharing information. I have the domain $$$$d.net and the same domain $$$$d.info where $$$$ is a word (that runs into the d) pertaining to the purpose of the site . The .com of this domain was already taken, but they've got nothing showing. They only have a not reached google error showing ie. dont seem to be trying to sell it either. I also have the long name of the site $$$$------&&&&&&&&&.com where the words $$$$ and &&&&&&&&& would contribute relevant seo to the site. In fact the word $$$$------ would also if a one letter spelling mistake is recognised at all by google, which i doubt but am unsure about. But as a brandname the $$$$------ word still works relevantly. Which do you think is a better choice to use? The short catchy name with the .info for relevance to information The .net which is more familiar than .info but slightly less relevant maybe. (But i think net as in network still works cos as i said it will be a social networking site). The long, .com domain which has more SEO plus a pun albeit on a spelling mistake. I know its kind of a subjective question and also hard to answer without knowing the name (which I've obfuscated because I'm only in initial design stage) but nevertheless im interested in what some of you guys think.

  Read the article

• Is it necessary to add an HP printer to CUPS using the hplip URI?

  - by JPbuntu

  I recently setup a CUPS print server (Ubuntu server 12.04) and I having trouble with performance of a HP Color LaserJet Printer CP3505n. The printer pauses for about a second between printing each page, which is annoying when there is a lot of printing to be done. This doesn't happen when the printer is installed directly to a Windows client. In an attempt to fix this I have setup the printer a couple different ways. I decided not to do a Samba share since this wiki said IPP is preferred. First Method Added to HP LaserJet to CUPS as a Discovered Network Printer, and selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) driver. I did not use a hplip URI. Second Method (hplip URI) I thought adding hplip to the mix might improve the performance, so I added the printer like this: Ran hp-setup -m 192.168.2.60, prompted to select driver Selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) Used hplip to generate a URI: hp-makeuri 192.168.2.60 Then added the printer to CUPS as a Local Printer: HP Printer (HPLIP), and entered: hp:/net/HP_Color_LaserJet_CP3505?ip=192.168.2.60. Either method I use I am able to share the printer on the network by adding a printer as http://192.168.2.2:631/printers/HP_LASER-TERRAC. Does it make a difference which way the printer is added cups? If so, and I install the printer with the hp URI, can I still change the driver using the CUPS web interface? I have been trying out different drivers to try and improve performance, and the cups interface is the easiest way to change them. Thanks in advance.

  Read the article

• How to create a restricted SSH user for port forwarding?

  - by Lekensteyn

  ændrük suggested a reverse connection for getting an easy SSH connection with someone else (for remote help). For that to work, an additional user is needed to accept the connection. This user needs to be able to forward his port through the server (the server acts as proxy). How do I create a restricted user that can do nothing more than the above described? The new user must not be able to: execute shell commands access files or upload files to the server use the server as proxy (e.g. webproxy) access local services which were otherwise not publicly accessible due to a firewall kill the server Summarized, how do I create a restricted SSH user which is only able to connect to the SSH server without privileges, so I can connect through that connection with his computer?

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• How do I set zone priority in Microsoft DNS?

  - by Justin

  I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

< Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629  | Next Page >