Search Results

Search found 26256 results on 1051 pages for 'information science'.

Page 623/1051 | < Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• SteamCMD can't add files to my home directory

  - by Angle O'Saxon

  I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• "Unknown user name or bad password" when I launch ADUC

  - by Chris

  When I open up Active Directory Users and Computers from my workstation, I receive an error: Naming information cannot be located because: Logon failure: unknown user name or bad password. Contact your system administrator to verify that your domain is properly configured and is currently online. If I log in to my workstation as somebody else, it works. If I log into a different workstation using my account, it works. All the workstations in question are running Windows Vista (32 and 64 bit) or Windows Server 2008. The domain controller in question is running Windows Small Business Server 2008. Everything else (that I tried) in the Remote Server Administration Tools runs just fine. Any thoughts? Edit: I just tried reinstalling RSAT. No such luck.

  Read the article

• About the new Microsoft Innovation Center (MIC) in Miami

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/08/21/about-the-new-microsoft-innovation-center-mic-in-miami.aspxLast night I attended a meeting at the new MIC in Miami, run by Blain Barton (@blainbar), Sr IT Pro Evangelist at Microsoft. The meeting was well attended and is meant to be run as a user group format in a casual setting. Many of the local Microsoft MVPs and group leaders were in attendance as well, which allows technical folks to connect with community leaders in the area. If you live in South Florida, I highly recommend to look out for future meetings at the MIC; most meetings will be about the Microsoft Azure platform, either IT Pro or Dev topics. For more information on the MIC, check out this announcement:  http://www.microsoft.com/en-us/news/press/2014/may14/05-02miamiinnovationpr.aspx. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• MVC pattern synchronisation

  - by Hariprasad

  I am facing a problem in synchronizing my model and view threads I have a view which is table. In it, user can select a few rows. I update the view as soon as the user clicks on any row since I don't want the UI to be slow. This updating is done by a logic which runs in the controller thread below. At the same time, the controller will update the model data too, which takes place in a different thread. i.e., controller puts the query in a queue, which is then executed by the model thread - which is a single-threaded interface. As soon as the query executes, controller will get a signal. Now, In order to keep the view and model synchronized, I will update the view again based on the return value of the query (the data returned by model) - even though I updated the view already for that user action. But, I am facing issues because, its taking a lot of time for the model to return the result, by that time user would have performed multiple clicks. So, as a result of updating the view again based on the information from model, the view sometimes goes back to the state in which the previous clicks were made (Suppose user clicks thrice on different rows. I update the view as soon as the click happens. Also, I update the view when I get data back from the model - which is supposed to be same as the already updated state of the view. Now, when the user clicks third time, I get data for the first click from model. As a result, view goes back to a state which is generated by the first click) Is there any way to handle such a synchronization issue?

  Read the article

• AppleTV - itunes store is temporarily unavailable - please check back later

  - by Ken

  When attempting to rent a movie on ATV, my wife received the error message above.  Alternately “server unavailable”.  When your wife is sick, the amount of IT support she needs goes up exponentially.  One piece of the puzzle was that she had changed her Apple ID password.  On her PC I ran iTunes and under account, there was only 1 device listed (not the ATV).  Even when signed out/back-in on the ATV under Settings>iTunes it still gave same error message.  What I suspect is it thinks she is trying to authorize the device to another Apple ID.  Some new 90 day rule limits when a device can be associated with another Apple ID.  Your iTunes store/account will show devices, and how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.  Apple must have no freaking idea why someone would want to know which ID is associated to the ATV (i.e. the vice versa), because it can’t be done. Solution: Try ATV settings>reset I swapped out ATV 1 for ATV 2 (used for music streaming downstairs).  I know it’s a cop-out solution, but remember I had a sick wife breathing down my neck.

  Read the article

• Package manager doesn't work anymore

  - by LukaD

  I'm using ubuntu 10.10 and recently my package manager has stopped working because of some problems with dependencies or something. I can't upgrade, install or uninstall anything at all. This is a huge problem. I couldn't find a solution to this with google so I'm asking here for help. This is what apt-get -f install outputs LANG=en_US.UTF-8 sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: firefox-4.0-core Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up openjdk-6-jre-headless (6b20-1.9.5-0ubuntu1) ... update-alternatives: error: alternative path /usr/lib/jvm/java-6-openjdk/jre/bin/java doesn't exist. dpkg: error processing openjdk-6-jre-headless (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: openjdk-6-jre-headless E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Simple mail server setup for a user-based website.

  - by Absolute0

  I am working on a simple website that has user registration. All I need to do is confirm email addresses by emailing a confirmation email and maybe send out periodic emails regarding various information. I am also considering having a [email protected] email for user questions and comments. The application is written in django and I am running it on ArchLinux on a VPS. I have no knowledge of mail servers. I tried setting up postfix and qmail but had no luck. They are complicated and require a lot of configuration to get them working properly. My use case is super simple and doesn't not require anything fancy. Is there any simple mailing setup that will enable me to quickly get emailing working with my django app with minimal work?

  Read the article

• Outlook 2010 intermittently going offline

  - by BarmyArmy

  Just a quick question to see if anyone can give me any direction in or solve the the following problem: Within the office there are a minority who use Outlook client using IMAP and the rest use Thunderbird on Linux. The people who are using Outlook 2010 are repeated (almost daily) reporting outages of emailing services for hours at a time forcing them to sign in and out etc but the people using Thunderbird do not have any issues what so ever which I assume will rule out an issue with the old mail server we are currently using. Any help in the matter would be hugely appreciated and of course if I can provide any further information to articulate understanding of the issue then please just ask. Thanks!

  Read the article

• Why are "Inverted Colors" considered an accessibility feature? [migrated]

  - by RLH

  Why is it that in Apple software (OS X and iOS,) the "Inverted Colors" display feature is considered an accessibility option? I understand that some users are color-blind. This would justify the Black & White, or grey-scale modes. What I don't understand is how or why does inverting the display color help someone with any specific, visual impairment or dysfunction. As a programmer that wants to understand the need so that I can develop better, accessible software, what purpose does this feature serve to the end user who has some form of visual impairment? NOTE: I felt that this was a hard question to categorize on StackExchange. I settled here on Programmers because I assume that questions of accessibility are important to all developers and this question sits somewhere in the middle between topics that StackOverflow and SuperUser may cover. Also, this question isn't specific to Apple software. I've just noticed that this feature has been available on Macs for a very long time, it's a feature on iOS, and it's always associated with the Accessibility settings. If I can garner some information regarding the needs of some users, I think that I can develop better, accessible software.

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• Minimum percentage of free physical memory that Linux require for optimal performance

  - by csoto

  Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

  Read the article

• How to factorize code in Unreal Kismet (i.e. "Material Function"s for Kismet)

  - by Georges Dupéron

  In the Unreal Development Kit, when using the Material Editor, one can factorize frequently-used groups of nodes by creating a Material Function (content Browser ? right-click ? new matrial function, IIRC). When defining the behaviour of some actor in Kismet, one can easily have a dozen nodes involved. If I have many actors that share the same behaviour, then I'll copy-paste these nodes, and change the variables so they point to the other actors. This leads to inconsistencies (a modification in the behaviour of an actor isn't propagated in the copy-pasted nodes), complexity (you end up with hundreds of nodes), and generally useless effort. My question is : Can I create a "kismet function", just like a material function ? Note: I'd rather avoid using UnrealScript. I don't even know where to type UnrealScripts, don't know where the documentation is and more generally don't have enough time to invest in learning UnrealScript. This "kismet function" feature must be usable by graphists (with little programming knowledge). If a (simple) script suffices to add this feature in the Kismet editor, so that one can create several "functions" without using UnrealScript, then fine, but I don't really want to have to write a script each time I want to factorize a few nodes. Thanks for any information !

  Read the article

• Effective and simple matching for 2 unequal small-scale point sets

  - by Pavlo Dyban

  I need to match two sets of 3D points, however the number of points in each set can be different. It seems that most algorithms are designed to align images and trimmed to work with hundreds of thousands of points. My case are 50 to 150 points in each of the two sets. So far I have acquainted myself with Iterative Closest Point and Procrustes Matching algorithms. Implementing Procrustes algorithms seems like a total overkill for this small quantity. ICP has many implementations, but I haven't found any readily implemented version accounting for the so-called "outliers" - points without a matching pair. Besides the implementation expense, algorithms like Fractional and Sparse ICP use some statistics information to cancel points that are considered outliers. For series with 50 to 150 points statistic measures are often biased or statistic significance criteria are not met. I know of Assignment Problem in linear optimization, but it is not suitable for cases with unequal sets of points. Are there other, small-scale algorithms that solve the problem of matching 2 point sets? I am looking for algorithm names, scientific papers or C++ implementations. I need some hints to know where to start my search.

  Read the article

• How do I put back different SCSI hard drives into their original RAID arrays across different servers?

  - by Edgar

  I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

  Read the article

• How to Create a Grid for a 2D Game?

  - by SoulBeaver

  So I'm currently writing the engine for my videogame. I've almost integrated Tiled (I think) so I should have a map-creator here soon. My question is, how do I actually make the grid? I'm really confused here. If I create a large map with, say, 20x20 grids the size of 32x32 (screen size 640x640), then what do I do with it? Let's say I have the code for creating a window, and then place a player sprite that I can move with input, that's fine. If I use one map that's as big as the screen, then every pixel on the map is also a pixel on the game screen. The mapping is exact. Now what happens if I have a 2000x2000 map, for example? My character would have to keep moving and move the map around (or rather the camera focused on the player moves). Then I can no longer say that the screen maps exactly to the pixel position of the map. I tried making a Grid class that maps out the screen area to 32x32 tiles, but I'm not sure if that makes any sense. Once the map moves each tile would have to update its information, or something. I'm just really confused here. How do I actually make the tiles and a grid and map them to the data I get from tiled, or that I make myself? Are there any good examples of source code that I could look at?

  Read the article

• I can't get grub menu to show up during boot

  - by wim

  After trying (and failing) to install better ATI drivers in 11.10, I've somehow lost my grub menu at boot time. The screen does change to the familiar purple colour, but instead of a list of boot options it's just blank solid colour, and then disappears quickly and boots into the default entry normally. How can I get the bootloader back? I've tried sudo update-grub and also various different combinations of resolutions and colour depths in startupmanager application with no success (640x480, 1024x768, 1600x1200, 16 bits, 8 bits, 10 second delay, 7 second delay, 2 second delay...) edit: I have already tried holding down Shift during bootup and it does not seem to change the behaviour. I get the message "GRUB Loading" in the terminal, but then the place where the grub menu normally appears I get a solid blank magenta screen for a while. Here are the contents of /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX=" vga=798 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

  Read the article

• vmware player - ubuntu can resolve hostname but ping fails

  - by recursive_acronym

  Using VMware players on Windows 7 with a Ubuntu 10.04 guest. When I ping it resolves the ip address but the ping fails. Hopefully this is a local issue as I don't have access to any of the network equipment (routers, etc). vmware tools is installed. Is there any other information I can provide to help resolve this? eth0 Link encap:Ethernet HWaddr 00:0c:29:83:4f:c0 inet addr:192.168.163.129 Bcast:192.168.163.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:4fc0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50006 (50.0 KB) TX bytes:16701 (16.7 KB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Learn More About the PO Approvals Analyzer

  - by LuciaC

  You may think that the PO Approvals Analyzer for Release 12 is only for diagnosing problems when you have a single Purchase Order or Requisition stuck in process, but it offers valuable information to keep your Procurement environment healthy.  Consider this:     The analyzer will list all Procurement critical patches that have not been applied.     It will provide Procurement invalid objects with error messages and provides solutions.     Validations of setup and database conditions for example max extents and space issues. Also the analyzer can be run on all Purchasing documents starting from a date you enter.  This multiple document check provides validations on:     Data corruption issues.     Workflow errors with generic messages i.e. document manager errors.     Documents with workflows in error that cannot be progressed via the application. And, unlike other diagnostics, the analyzer provides known solutions to the problems indicated! So access the Analyzer today and run it on your instance!  Access it now via Doc ID 1525670.1.

  Read the article

• Java SE Updates

  - by Tori Wieldt

  Duke's helpers from around the world have been busy making Java just right for all good developers. Here are the updates:  Java SE 7 Update 10This releases provides key security features and bug fixes. Oracle strongly recommends that all Java SE 7 users upgrade to this release. JavaFX 2.2.4 is now bundled with the JDK on Windows, Mac and Linux x86/x64.Learn more Download Java SE 6 Update 38  This release provides security features and bug fixes. Oracle strongly recommends that all Java SE 6 users upgrade to this release (or to Java SE 7 update 10). Learn more Download Java SE Embedded 7 Update 10 This releases provides the security features and bug fixes from Java SE 7 Update 10. Learn more Download Java SE Embedded 6 Update 38  This releases provides the security features and bug fixes from Java SE 6 Update 38. Learn more Download NOTE: The end of public updates for Java SE 6 will occur in February 2013. See "The End of Public Updates for Java SE 6" and the Java SE Support Roadmap for more information.

  Read the article

• VirtualBox cannot start a virtual machine on Windows 7

  - by Zan Lynx

  Note that this question is mostly so others can find this information. I ran into a problem recently with my Fedora-14 virtual machine running on a Windows-7 host with VirtualBox. VirtualBox could not start the Fedora virtual machine, but it could start a Ubuntu virtual server machine that was configured for 512 MB of RAM. The Fedora-14 machine was configured for 2 GB of RAM. The Fedora-14 machine had been working a week ago. What had I recently changed...? Answer to follow.

  Read the article

• Microsoft is Top Pick for ALM

  - by Arkham

  Investigating the market for a new software product can be a daunting task. Sometimes it’s difficult to even uncover all of the players. There’s no shortage of rhetoric on each vendor’s web site, but how can today’s CTO get objective information about how a software package ranks against it’s peers in a given space? Every year, Gartner releases what they call a Magic Quadrant report evaluating various products in a given space. This past week, Gartner released their analysis of products in the Application Lifecycle Management (ALM) arena. It is very exciting to see us in the top spot as a thought leader and for our ability to execute. If you are interested in ALM, you can read through an entire reprint of the report here. There’s plenty of new competitors listed and some of the existing competitors have shifted quite a bit. And this comes prior to the release of Team Foundation Server 2012! I suppose with all of the new features in 2012, they could just add another square to the upper-right. It’s beyond awesome! It’s be-awesome!

  Read the article

• Do cross reference database tables have a place in domain driven design?

  - by Mike Cellini

  First some background. Let's say we have a system where a customer is placing an order in a web interface. The items that customer is ordering can priced in various ways. Sometimes including the cost of delivery and sometimes not at all. That pricing effectively depends on a variety of factors including the vendor's own pricing model, that vendor's individual contracts with customers as well as that vendor's contracts with its own suppliers. Let's assume that once a customer places an order for a particular item and chooses a contract if any, the method of delivery can be determined by variables on those contracts. Those delivery methods also live in their own table in the database and have various properties consumed downstream. It makes sense that a cross reference or lookup table would store that information. That table would be loaded into the domain and could then be used to apply the appropriate delivery method while processing the order. Does this make sense in the context of domain driven design? Or is my thinking too relational? Is this logic that should be built into it's own class/method (I mean beyond apply the cross reference table data)?

  Read the article

< Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >