Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 623/750 | < Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >

• Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

  - by emotionull

  I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

  Read the article

• As an admin, what tools do you use to log what you do to your boxes?

  - by Jerry

  I am more of a linux applications developer than an admin. Over time, I've built servers and maintained them, sometimes to offer services, mostly just to develop the applications I work on. Way back when I would create a file in my account to keep notes on what I did on each machine, so that I could replicate that when I migrated to other machines. Nowadays, I install something a private trac installation, install it's blog plugin, and then use that to make notes of everything I install, and most commands that I run, as well as the output. This provides me a combination wiki and blog that I find very useful as a "captain's log". I do this mostly so that when I migrate to a new clean machine, I have a much easier time in bringing it up. And yet, I am always amazed when I see others just install this, delete that, run this, setup this config, ... without seeming to use any way to actually note what they are doing. What do YOU do, and what tools are available? I am especially interested in the transition between maintaining a few machines for a few people and maintaining several to dozens of machines providing a real service. What are the best practices, and where can I find good resources? Thanks!

  Read the article

• Puppet: is it ok to "force" certname when you expect to shuffle nodes around?

  - by Luke404

  We all know (good example on SF) that Puppet hostname detection could be... fun. At our company (and I guess we're not alone at this) we usually pre-configure servers at our offices and test them before bringing the gear to a remote datacenter and rack them. Of course the reverse dns will change when doing that, even if we don't change the actual hostname of the system. We're slowly drafting our puppet setup and I'd like to be sure those moves won't create problems. My idea is to explicitly configure the desired full FQDN of the system as certname in puppet.conf at server provision time (before the very first puppet run). My process would look something like this: basic o.s. installation basic network configuration, enough to reach the internet and resolve dns install puppet and set up certname start puppet and let him manage the whole configuration test, fix problems in config (via puppet), re-test, and so on... manually stop puppet set up new network configuration for the datacenter network move the machine to DC turn it on puppet should automatically start and keep on doing its job The process is supported by detecting the environment in puppet's manifests (eg. based on subnet, like they do at Wikimedia) and modify configuration as needed (eg. resolv.conf contents appropriate for each network). Each node's certname will never change for the whole system life cycle. Is there any problem with this approach? Could it be improved?

  Read the article

• Interaction between two Clouds

  - by Snehal Masne

  I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration using the Ubuntu Enterprise Cloud Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....?

  Read the article

• Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

  - by Jamie G

  I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

  Read the article

• How can I rapidly switch hosts?

  - by EAMann

  I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

  Read the article

• Linux: Encryption of a physical LVM volume doesn't imply encryption of its logical subvolumes?

  - by java.is.for.desktop

  Hello, everyone! I installed OpenSuse one year ago on my notebook. I created all partitions except /boot inside an LVM partition. I enabled encryption for it during setup. The system asked me a password on each boot later. Everything seemed fine... But one day I wanted to cancel the boot process and did it with SysRq REISUB. During entering this combination, the system suddenly continued to boot without any password being entered. I had no /home and no swap, but / was mounted! I checked multiple times, it was inside an "encrypted" physical LVM volume. Later I found out that OpenSuse can't encrypt / at all. There is an option to enable encryption for each logical volume, and indeed it fails for /. Later I tried Fedora. The options during partitioning were misleading by same means. I could enable "encryption" of a physical volume and each logical subvolume. With the exception that Fedora actually allowed to encrypt /. Question: What's the point of setting up "encryption" for a physical LVM volume, when it doesn't imply (real) encryption of its logical subvolumes? Did I get something wrong in this whole concept?

  Read the article

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• WSUS registry file: NoAutoRebootWithLoggedOnUsers entry being ignored

  - by the_pete

  We are using a registry entry to connect our internal workstations to our WSUS server and everything seems to be working except the NoAutoRebootWithLoggedOnUsers entry. Without fail, over the last few weeks, our lab setup as well as our users have been prompted to restart their machines with a 15 minute time out and there's nothing they can do about it. They can't postpone or cancel the restart, all options in the prompt are greyed out. Below is the registry file we are using to connect our workstations to our WSUS server: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "AcceptTrustedPublisherCerts"=dword:00000001 "ElevateNonAdmins"=dword:00000000 "WUServer"="http://xxx.xxx.xxx.xxx:8530" "WUStatusServer"="http://xxx.xxx.xxx.xxx:8530" [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU] "AUOptions"=dword:00000004 "AutoInstallMinorUpdates"=dword:00000001 "DetectionFrequencyEnabled"=dword:00000001 "DetectionFrequency"=dword:00000002 "NoAutoUpdate"=dword:00000000 "NoAutoRebootWithLoggedOnUsers"=dword:00000001 "RebootRelaunchTimeout"=dword:00000030 "RebootRelaunchTimeoutEnabled"=dword:00000001 "RescheduleWaitTime"=dword:00000020 "RescheduleWaitTimeEnabled"=dword:00000001 "ScheduledInstallDay"=dword:00000000 "ScheduledInstallTime"=dword:00000003 "UseWUServer"=dword:00000001 There is a bit of redundancy, if you want to call it that, having both the NoAutoRebootWithLoggedOnUsers entry as well as the entries for RebootRelaunchTimeout but we wanted to see if we could either disable the restart, or give our users a larger window within which they could wrap up their work, etc. before restarting. Neither of these entries seems to work, but our priority is getting NoAutoRebootWithLoggedOnUsers working and any help with this would be greatly appreciated.

  Read the article

• Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

  - by DOTang

  I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

  Read the article

• Limited user requires admin rights for plug and play printer?

  - by Kalamane

  I have a small fleet of laptops that aren't part of a domain running Windows XP Pro SP3 as limited users. They are used for printing different shipping documents. I have a script that runs when they start up that uses devcon and prntmngr to detect and install/configure the currently connected usb printers. This lets us deploy the laptops to any printing station with a USB printer and have the printer 'just work' for the end user employee. I've taken the original clone image and have added functionality to it. Since then I've discovered a bit of an issue with using HP LaserJet P1606dn printers. They have started asking for admin rights on setup. This is with and without the script running. Previously they would automatically install because I had installed WHQL plug and play drivers for them. I thought it might have to do with the HP Smart Install Utility but it happens when that is disabled. I don't have a good point to roll back to before this started happening because this was an issue on the image I took initially to start this upgrade. What could be causing this?

  Read the article

• Easiest way to do host name resolution with IPA?

  - by Luke

  We are currently using static LAN IP addresses for our internal non-public facing servers. We don't have DHCP configured. We're using Vyatta for our router and firewall. The firewall is configured to be zone based. We want to setup IPA for centralized authentication (LDAP+Kerberos). IPA is requiring resolvable host names. I want to avoid having to enter DNS records by hand. What is the most painless way to make host names resolvable that works with IPA in a Linux only environment? We arn't using anything to resolve host names now. Up until now we've been using static ip addresses and local users on each server. We've looked at BIND, DHCP (does that even solve the problem?), and multicast DNS. At this point we're not sure which solution would work best. Is there another option we haven't considered? Security is very important. We have multiple zones where each zone has very specific or no access to another zone. DNS for public domains is forwarded from Vyatta to our ISP's DNS server.

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• NFS on top of GFS2 - does it work?

  - by Matthew

  We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

  Read the article

• DNS caching server config problem

  - by Alex

  I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related. So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller. My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working. So that leaves me to think that my caching server is not forwarding properly. For example, this AD is going to have a naming convention of hostname.mydomain.local. If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local. However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain). Any suggestions? Here is my named.conf file: options { directory "/var/named"; listen-on { 192.168.0.14; 127.0.0.1; }; forwarders { ; ; }; forward first; }; zone "." in { type hint; file "db.cache"; }; zone "0.0.127.in-addr.arpa" in { type master; file "db.127.0.0"; }; //forward zone for mydomain.local zone "mydomain.local" { type forward; forwarders { 192.168.1.21; }; };

  Read the article

• Setting up Virtual Host in Fedora Core 15 using apache

  - by Roland

  I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

  Read the article

• Periodic internet connection drops

  - by user9647

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Why is this iptables rule that does port forwarding not working?

  - by videoguy

  I have a server bound to localhost:7060. It is using ipv6 socket instead of ipv4. Below is netstat outout. # netstat -an Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 10.200.32.98:1720 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4122 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4123 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:4123 127.0.0.1:43051 ESTABLISHED tcp 0 0 10.200.32.98:5555 10.200.32.44:53162 ESTABLISHED tcp6 0 0 :::5060 :::* LISTEN tcp6 0 0 ::ffff:127.0.0.1:7060 :::* LISTEN tcp6 0 0 :::23 :::* LISTEN tcp6 0 0 ::ffff:10.200.32.98:23 ::ffff:10.200.32.142:43505 ESTABLISHED tcp6 0 0 ::ffff:127.0.0.1:43051 ::ffff:127.0.0.1:4123 ESTABLISHED tcp6 0 0 ::ffff:10.200.32.98:23 ::ffff:10.200.32.44:53195 ESTABLISHED udp6 0 0 :::5060 :::* CLOSE # I want to setup a port forwarding rule that accepts connections on port 24 (on all interfaces loopback as well as eth0) and forward the data to localhost:7060. This is how I am setting up the iptables rule: iptables -t nat -A PREROUTING -p tcp --dport 24 -j DNAT --to 127.0.0.1:7060** It is not working. When I telnet from different box, I see the following $telnet 10.200.32.98 24 Trying 10.200.32.98... If I change the server to bind to *:7060 and set the following rule, it seems to work fine. iptables -t nat -A PREROUTING -p tcp --dport 24 -j REDIRECT --to-port 7060 But that will make my server available on WAN interface which I don't like. I feel it had something to do with ipv6 socket (tcp6 line in netstat output). This whole thing is done on an Android device with custom built Android platform image. How do I get this working?

  Read the article

• centos install / partitioning

  - by ServerSideX

  I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

  Read the article

• How to configure a Web.Config file to allow custom 404 handling while still displaying on-page 500 error detail?

  - by Mark

  To customize 404 handling and based on the hosting company's suggestion, we are currently using the following web.config setup. However, we quickly realized that with this configuration, any page error (500 error) are also getting redirected to this custom error page. How can I modify this config file so we can continue to handle 404 with custom file while still able to view on-page error? <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.webServer> <httpErrors errorMode="DetailedLocalOnly" defaultPath="/Custom404.html" defaultResponseMode="ExecuteURL"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="/Custom404.html" responseMode="ExecuteURL" /> </httpErrors> </system.webServer> <system.web> <customErrors mode="On"> <error statusCode="404" redirect="/Custom404.html" /> </customErrors> </system.web> </configuration>

  Read the article

• Email Mail Merge via linked Excel sheet

  - by Joe Perrin

  I have a MS Word 2007 document setup as a Mail Merge doc. I am using Excel as the data source. The MERGEFIELD ClientData contains an Excel file (test.xlsx). I want to merge the data from the Excel file listed in ClientData into the respective Mail Merge document. However, whenever I start the Mail Merge the {MERGEFIELD ClientData} field gets resolved only once and does not select the next row from ClientData. So this: {LINK Excel.Sheet.12 "C:\\path\\to\\file\\{MERGEFIELD ClientData}" \a \f 4 \h} Becomes this after starting the merge: {LINK Excel.Sheet.12 "C:\\path\\to\\file\\test.xlsx" \a \f 4 \h} So every Mail Merge doc uses the test.xlsx instead of the respective Excel document specific to the client (i.e test1.xlsx, test2.xlsx, test3.xlsx, etc.) As the merge runs through each Mail Merge doc I expect to see this: {LINK Excel.Sheet.12 "C:\\path\\to\\file\\test.xlsx" \a \f 4 \h} {LINK Excel.Sheet.12 "C:\\path\\to\\file\\test1.xlsx" \a \f 4 \h} {LINK Excel.Sheet.12 "C:\\path\\to\\file\\test2.xlsx" \a \f 4 \h} {LINK Excel.Sheet.12 "C:\\path\\to\\file\\test3.xlsx" \a \f 4 \h} But for some reason this isn't happening. Does anyone have any suggestions? Thanks!

  Read the article

• VOIP and internet connection speeds [cable vs. fiber]

  - by microchasm

  Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

  Read the article

• Securing phpmyadmin: non-standard port + https

  - by elect

  Trying to secure phpmyadmin, we already did the following: Cookie Auth login firewall off tcp port 3306. running on non-standard port Now we would like to implement https... but how could it work with phpmyadmin running already on a non-stardard port? This is the apache config: # PHP MY ADMIN <VirtualHost *:$CUSTOMPORT> Alias /phpmyadmin /usr/share/phpmyadmin <Directory /usr/share/phpmyadmin> Options FollowSymLinks DirectoryIndex index.php <IfModule mod_php5.c> AddType application/x-httpd-php .php php_flag magic_quotes_gpc Off php_flag track_vars On php_flag register_globals Off php_value include_path . </IfModule> </Directory> # Disallow web access to directories that don't need it <Directory /usr/share/phpmyadmin/libraries> Order Deny,Allow Deny from All </Directory> <Directory /usr/share/phpmyadmin/setup/lib> Order Deny,Allow Deny from All </Directory> # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/phpmyadmin.log combined </VirtualHost>

  Read the article

• Allow members of a group to be unlocked by a specific account on AD

  - by JohnLBevan

  Background I'm creating a service to allow support staff to enable their firecall accounts out of hours (i.e. if there's an issue in the night and we can't get hold of someone with admin rights, another member of the support team can enable their personal firecall account on AD, which has previously been setup with admin rights). This service also logs a reason for the change, alerts key people, and a bunch of other bits to ensure that this change of access is audited / so we can ensure these temporary admin rights are used in the proper way. To do this I need the service account which my service runs under to have permissions to enable users on active directory. Ideally I'd like to lock this down so that the service account can only enable/disable users in a particular AD security group. Question How do you grant access to an account to enable/disable users who are members of a particular security group in AD? Backup Question If it's not possible to do this by security group, is there a suitable alternative? i.e. could it be done by OU, or would it be best to write a script to loop through all members of the security group and update the permissions on the objects (firecall accounts) themselves? Thanks in advance. Additional Tags (I don't yet have access to create new tags here, so listing below to help with keyword searches until it can be tagged & this bit editted/removed) DSACLS, DSACLS.EXE, FIRECALL, ACCOUNT, SECURITY-GROUP

  Read the article

< Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630  | Next Page >