Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 627/750 | < Previous Page | 623 624 625 626 627 628 629 630 631 632 633 634  | Next Page >

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

• Gentoo server time issue, can't manually set time, NTPD won't correct, too big of a time difference

  - by kevingreen

  So, my server is living in the future, unfortunately I can't get lottery numbers, or stock picks out of it. It thinks this is the time: Thu Nov 7 04:07:18 EST 2013 Not correct, I tried to set the time manually via date in a few ways # date -s "06 NOV 2013 14:48:00" # date 110614482013 -- same output, same problem Which outputs Wed Nov 6 14:48:00 EST 2013, but when I check the date again, it's still set to Nov 7th 0400 or whatever. I checked my system messages, and I see this pop up often: Nov 7 03:54:00 www ntpd[4482]: time correction of -47927 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. Which makes sense, we're way off the correct time. But I can't seem to manually fix it. So now what? Also, I'm wondering if my hardware clock is setup correct, hwclock doesn't return any values. Would that be causing issues? This is a virtualized server, I don't have direct access to the hypervisor, but I can talk to who does, assume I can explain myself well enough. Thanks

  Read the article

• please explain these mongo statistics

  - by sivann

  My setup: I have 2 hosts, and 2 shards each. Host1 has 2 shards, and is the master of the replicas host2 has the secondaries of the 2 shards. . host1: shard1 (repset1),shard2 (repset2) host2: shard1 (repset1),shard2 (repset2) There's also a 3rd host that acts as arbitrer. I have 50 threads writing randomly to both shards (using a hash) via mongos with REPLICA_SAFE WriteConcern set on each insert. The questions: mongostat displays about 90% locked for both shards in host1 and about 1% locked on host2. Since I use REPLICA_SAFE which supposedly writes to both servers shouldn't the locks be the same? mongostat reports qr=30 for both shards of host1, and qw=0 always. Since I perform only writes how is this possible? Moreover on host2 all queues are reported 0. Faults are abut the same in all shards/hosts (arround 80). netIn/netOut on the secondaries (host2) are always about 200bytes/sec. Too low. mongos has 53 connections, host1's shards have 71 and 71 and host2's shards have 9 and 8. How is this? Please answer whatever you can. Thanks!

  Read the article

• Removing Phantom Registry Entries

  - by shedd

  First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

  Read the article

• Allow SFTP in iptables

  - by Kevin Orriss

  I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

  Read the article

• Hosting options for data-enabled web application

  - by Hertfordian

  I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

  - by Enigma83

  I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

  Read the article

• How to get a list of Dovecot IMAP users

  - by Colt McCormack

  How do you get a list of users for a dovecot email server that connect via IMAP (as opposed to POP)? Our server is setup to authenticate via LDAP/PAM. Is there an easy way to get a list of the users who are accessing their mail via IMAP, rather than POP? I am about to migrate our server to Google Apps and want to migrate all of the mail for my IMAP users only (couple hundred out of several hundred total users). POP mail will be migrated separately from the client end obviously. I would much rather migrate only the IMAP users rather than the whole domain which would include migrating a bunch of POP mail left in the server that has already been read/sorted/deleted in the client's email program. Migrating all of that extra useless leftover POP mail could waste weeks of migration time. I suppose parsing some logs to see who has connected on an IMAP port (995 or 993) would give me a list would work if someone could help me do that. I know I have the raw dovecot logs, but am hoping for a cleaner solution.

  Read the article

• How to route outbound traffic to specific domain "XYZ.org" via a specific NIC or public/static IP?

  - by user139943

  Within the next week or so, I'll be setting up an AT&T U-verse modem with 5 usable static public IP addresses. I plan to register a domain name to 1 of the 5 static IPs (remaining 4 unregistered), and run a website from a single server setup in my home LAN. I'll skip the long winded reason why, but I need to somehow route outbound traffic (originating from my server) destined for one public domain (i.e. http://www.sample.org) through one of the UNREGISTERED static IP addresses ONLY. Basically, I want this public domain to see connections coming from an IP address and not my domain name. If it makes it easier, this can apply to all outbound traffic from my server as long as it doesn't impact users browsing my website! Inbound connections should go through the domain name / registered public IP. Can I accomplish this with my single server with one or multiple NICs? Do I need multiple servers and set one up as a proxy? Please help as my background is in software and not networking, and I don't think I can accomplish this at a software level (e.g. Java). Thanks.

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• No Network Connection in WinXP image from Microsoft running on VirtualBox 3.1.6 OSE (Ubuntu 10.04) due to missing CD Rom

  - by Bevor

  I'd like to test local websites in IE7 and IE8.To do that I thought about using the free Microsoft images: http://www.microsoft.com/windowsxp/using/networking/setup/default.mspx I converted the VHDs to VDIs to make them run in VirtualBox. ( http://www.qc4blog.com/?p=721 ) This works fine. The problem is that in this Windows XP installation there is no Network Adapter configured. Actually nothing at all is configured because it needs the Windows XP CD Rom to do that. If I would have a Windows XP CD Rom, I would not need to run the Microsoft image, so is there some kind of workaround to get an internet connection? Meanwhile I set "bridged" in VirtualBox. But this doesn't help because "ipconfig /all" in the guest system doesn't show any data because nothing is configured. How can I get a connection to my local Apache (Host system). http://localhost would be enough. By the way: I can't install the "Guest additions". When I do that, the 3 days trial period of the guest system is suddenly gone, so I can't use it anymore and it is senseless. Any ideas? Update: I've tried the Vista image and it gets an internet connection. From Vista image I can get to my site with 192.168.1.3/mywebsite in the browser url. So actually I don't care about the WinXP issue anymore but I would be glad if anyone still knows a solution.

  Read the article

• How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

  - by user234831

  This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• Wireless Internet Connection Sharing in Ubuntu

  - by klutch2

  As the title states, I need to share a wireless connection with a laptop running Ubuntu as the AP. The setup will be as follows: Corporate WiFi <<== Laptop <<== Other Devices i.e. (iPad, iPhone) I want to be able to connect the "Other Devices" via WiFi to the laptop. I have thought of setting up an ad-hoc network by connecting to the Corporate WiFi and then setting up a new network and hoping the connection to both would stay, but that doesn't seem to work. If I set up the ad-hoc network by itself, I can see it from my "Other Devices". The reason I need this is because for some reason, my iPad and my iPhone will not connect to my corporate WiFi and I need to use them so I want to use my laptop to share the connection and act as an AP for my "Other Devices". My laptop is a Chrome CR-48 running Ubuntu and as some of you might know, it does not have an ethernet port, so having a wired connecting and then setting up a network is out of question. I want to connect to the Corporate WiFi and share that connection by having the laptop act as an AP for other devices.

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

• How should I configure my Apache Hosts File to serve a different site for localhost than for my domain/publicip?

  - by rofls

  I'm trying to test out a LAMP (with PHP5 specifically) setup with Django already serving a website. I want to do the PHP stuff on localhost for now, so that when I do something like this: curl http://localhost/database/script.php?var=1, I get a response from the php server. Right now I'm getting a Django error. I tried something like this in the default file in sites-available: Listen 80 <VirtualHost aaa.bbb.ccc.ddd> ServerName localhost DocumentRoot /home/phpsite </VirtualHost> where aaa.bbb.ccc.ddd is the local ip address, and changing my actual site's settings to specify the public ip, like this: Listen 80 <VirtualHost www.xxx.yyy.zzz> ServerName mysite.com DocumentRoot /srv/www/mysite WSGIScriptAlias / /srv/www/mysite.wsgi </VirtualHost> but then I start getting all kinds of errors when I start apache, such as port ::[80] is already in use or something. I noticed that the hosts file that's located in /etc/apache2/ is apparently pointing everything to mysite.com, including my local ip as well as 127.0.0.1 and 127.0.1.1; Do I need to change the configuration there too?

  Read the article

• Receiving and processing SMS messages through a script?

  - by ShankarG

  I am attempting to setup a system to receive and process SMS messages automatically. The system is intended for use in a context (an unfunded migrant workers' union in India) where both finances and sysadmin skills are extremely constrained (I would be the only person, in the near future, who would be administering the system). The intention is to make some functions - registration of members, generation of ID cards, communication of alerts and other information - easier. However, for receiving and sending SMS, I have not been able to find any email to SMS or other kind of gateway that functions in India. Perhaps there is one (edit: apparently Clickatell does have an India service, but the prices appear astronomical). If not, can one rely on a USB mobile modem (such as those provided by many mobile providers in India)? It seems like, with utilities such as gammu or bitpim, SMS operations on such a modem could be scripted. Is this actually feasible, though? Thanks in advance for your thoughts and suggestions. edit: Original first question removed since the two questions had little to do with each other. The original first question has been asked separately here

  Read the article

• GPG - why am I encrypting with subkey instead of primary key?

  - by khedron

  When encrypting a file to send to a collaborator, I see this message: gpg: using subkey XXXX instead of primary key YYYY Why would that be? I've noticed that when they send me an encrypted file, it also appears to be encrypted towards my subkey instead of my primary key. For me, this doesn't appear to be a problem; gpg (1.4.x, macosx) just handles it & moves on. But for them, with their automated tool setup, this seems to be an issue, and they've requested that I be sure to use their primary key. I've tried to do some reading, and I have the Michael Lucas's "GPG & PGP" book on order, but I'm not seeing why there's this distinction. I have read that the key used for signing and the key used for encryption would be different, but I assumed that was about public vs private keys at first. In case it was a trust/validation issue, I went through the process of comparing fingerprints and verifying, yes, I trust this key. While I was doing that, I noticed the primary & subkeys had different "usage" notes: primary: usage: SCA subkey: usage: E "E" seems likely to mean "Encryption". But, I haven't been able to find any documentation on this. Moreover, my collaborator has been using these tools & techniques for some years now, so why would this only be a problem for me?

  Read the article

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• Exchange 2007 Backup - For a newbie

  - by mew3900

  I am trying to setup an exchange 2007 backup solution. After doing a lot of reading, Microsoft have decided in server 2008 unless you are willing to spend a great deal on a 3rd party solution you are pretty stuck! Essentially what I have been asked to do is perform an off-line file backup of our current exchange server and replicate this onto a new 2nd server. The reasoning behind this is that we need to upgrade our current installation of exchange 2007 to SP2 so that the exchange plug-in for windows server backup will be available to us. From this I can then actually take an exchange aware backup weekly and take it off site. Ideally then also we can migrate to this new server and keep the old one as a fail over. Is there a way I can copy across the files required onto a second server, although I doubt very much it is that simple. I may be barking up completely the wrong tree, however I have very limited knowledge with Exchange and any help and advice on how I would resolve this would be much appreciated. Thanks in advance

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• What could cause a dual-monitor PC to suddenly stop using one of the screens?

  - by raldi

  I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

  Read the article

• Fedora Core 6 Migration

  - by Matthew Sprankle

  I am at a loss as to what I should to for this server. I need it to run php5.3 and corresponding version of mysql. I received a client today through work that is using Fedora core 6 running 10 very small websites on some very hodge podge setup. My original idea was just upgrade to php5.3. I have yum (installed 3.0.8) reconfigured for the fedora archive. The latest version of php it allows is 5.1.8. I am still relatively new to server setups and am nervous about wiping their server to upgrade it. Since it is about 6-8 years old I'm not sure if it will even support the newest version of fedora. The server specs are: Parallels Plesk Panel version 9.5.4 Operating system Linux 2.6.9-023stab048.4-smp CPU GenuineIntel, Intel(R) Xeon(R)CPU E5335 @ 2.00GHz (10gb disk space and 1gb of memory). I use fedora for my personal server so I was a little familiar with it. I haven't done anything too extravagant. Is there a way I can escape this nightmare with installing php5.3 or do I need to migrate these sites to a new server?

  Read the article

• Possible Hack with FTP - What are the solutions?

  - by iamrohitbanga

  I was reading the FTP rfc and hence had this idea. Suppose there are several public ftp servers that allow anonymous user login. I open a control connection on port 21 to each of these servers. Now suppose there is a web server a.com with ip address x.y.z.w listening on port 80. FTP allows a user to specify the host on which the data connection is to be setup. So a user specifies the host and port number of a.com web server. Now the ftp server starts sending data to a.com for which it is not a valid HTTP request and hence it is rejected. But a.com notes that the invalid http request came from a public ftp server and not my ip address. Can this not lead to a distributed attack by utilizing all public ftp servers. worse still the the data being sent by ftp server could be a valid http request which could trigger a.com to send a file back to the ftp server. Is there a solution for this or is it no problem at all.

  Read the article

< Previous Page | 623 624 625 626 627 628 629 630 631 632 633 634  | Next Page >