Search Results

Search found 21644 results on 866 pages for 'connection speed'.

Page 624/866 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

  - by retailevolved

  I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• How do I record sound from my CD/DVD player without other system sounds in the mix?

  - by Software Monkey

  Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

  Read the article

• CGI error from PHP when running exec() on IIS

  - by Patrick

  Windows Server 2003 x64 PHP 5.2 IIS 6.0 The program Ink2Png.exe is set with Everyone-Read and Execute permissions. As does its dependency (microsoft.ink.dll) PHP Safe Mode is off exec() is passed [the full exe path], space, [full path to another file] This other file also has full read permissions. The output directory has full write permissions. As soon as exec() is hit, the connection dies, the browser does not even receive a full set of http headers, and it reports a CGI error. Examining the output, it appears the program was not even run. Any ideas? How can I figure out what exactly is happening and get it running again? EDIT: Also, it is a .NET application, if that is significant in any way.

  Read the article

• Cream of the Crop

  - by KemButller

  JD Edwards has been working hard to ensure that you shouldn't have to work so hard! Yet there are still JD Edwards customers that may not be up to speed on all the new and or improved tools and utilities we have delivered, all designed to make your life easier. So today, I want to share what I consider to be the cream of the crop….those items that every customer should know about and leverage to make ERP life just a little bit (or A LOT) easier! These are my top picks, the cream of a very good crop! Explore and enjoy, and gain some of your time back to do with as you please. · www.runjde.com It’s where to go when you need to know! The Resource Kits available on www.runjde.com provide comprehensive Resource Kits (guides) by user type. The guides provide brief descriptions of the wide array of resources that are available to JD Edwards’s eco system and links to each of those resources. · My Oracle Support (MOS) Information Centers This link will take you to an index that is designed to provide you with simple and quick navigation to the available EnterpriseOne Information Centers. This index provides links to: · EnterpriseOne Application specific Information Centers · EnterpriseOne Tools and Technology Information Centers · EnterpriseOne Performance Information Center · EnterpriseOne 9.1 and 9.0 Information Centers Information Centers give Oracle the ability to aggregate content for a given focus area and present this content in categories for easy browsing by our customers. Information Centers offer a variety of focused dynamic content organized around one or more of the following tasks. · Overview · Use · Troubleshooting · Patching and Maintenance · Install and Configure · Upgrade · Optimize Performance · Security · Certify JD Edwards Newsletters Be in the know by reading the Global Customer Support Product Newsletters. They are PACKED with news and information covering a wide range of topics and news. It is a must read if you want to know what’s happening in the JD Edwards universe! Read the latest EntepriseOne newsletter Read the latest World newsletter Learn How to receive notification when a new newsletter edition is published Oracle Learning Library – (OLL) Oracle Learn Library is the place to go for easy access to JD Edwards Application and Tools training. For a comprehensive view of the training available for a specific product/functional area, explore the Knowledge Paths For Net Change (new feature) training, explore the TOI sessions (TOI stands for Transfer Of Information). Tip: Be sure to experiment with the search filters! · www.upgradejde.com The site designed to help customers and partners with the process of upgrading JD Edwards. The site is a wealth of information, tools and resources designed to assist in the evaluation, planning and execution steps required when upgrading. Of note is the wildly successful upgrade strategy known as “The Art of the Possible” wherein JD Edwards and many of our partners hold free workshops to teach customers how to conduct upgrades in 100 days or less. Equally important is the fact that on www.upgradejde.com, customers can gain visibility into planned enhancements using the Product and Technology Feature Catalogs. The catalogs are great for creating customer specific reports about the net change between older releases and current or planned releases. Examples of other key resources on www.upgradejde.com are the product data base changes between releases, extensibility guides, (formerly known as programmer’s guides), whitepapers, ROI calculators and much more!

  Read the article

• SVN Error when connecting from MacBook

  - by user66850

  This is drying me nuts for last 5 days!!! Out of the blue 5 days ago, SVN access from my MacBook Pro failed: I cannot access any SVN (i.e. not in our University or open source projects etc). The error obtain when performing 'svn co', or any other svn commands is shown below. This is same message is obtained irrespective of the svn repository (i.e. it is something due to my Macbook) svn co http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH/ svn: OPTIONS of 'http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH': Could not read status line: connection was closed by server (http://anonsvn.internet2.edu)

  Read the article

• Domain users sometimes cannot access our NAS

  - by Natalie

  I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

  Read the article

• Ubuntu based VPN server behind NAT router?

  - by maartenn88

  I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

  Read the article

• How do I set my router up to authenticate with my service provider?

  - by João Lourenço

  Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

  Read the article

• Selectively delete entries from Windows 7 autocomplete history dropdown box

  - by kez

  Random question, and I'm sure it has a very simple answer, if not already asked and answered in some shape or form. How do you selectively delete entries from the autocomplete history dropdown thingy? For example, in the Run dialog box, typing a few letters will display a dropdown box with a history of matchine entries that you have previously run. I swear I used to be able to delete from the list by using the arrow keys to highlight and then press the DEL key. Regardless of whether this is true or not, is there any way to selectively delete entries from this list? Another example is the dropdown list in the Remote Desktop Connection dialog box.

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• What individual needs to be aware when signing a NDA with client?

  - by doNotCheckMyBlog

  I am very new to IT industry and have no prior experience. However I came into contact with a party who is gear to build a mobile application. But, they want me to sign NDA (No Disclosure Agreement). The definition seems vague, The following definitions apply in this Agreement: Confidential Information means information relating to the online and mobile application concepts discussed and that: (a) is disclosed to the Recipient by or on behalf of XYZ; (b) is acquired by the Recipient directly or indirectly from XYZ; (c) is generated by the Recipient (whether alone or with others); or (d) otherwise comes to the knowledge of the Recipient, When they say otherwise comes to the knowledge of the recipient. Does it mean if I think of any idea from my own creative mind and which is similar to their idea then it would be a breach of this agreement? and also is it okay to tell to include application name in definition as currently to me it sounds like any online of mobile application concept they think I should not disclose it to anybody. "Confidential Information means information relating to the online and mobile application concepts discussed and that:" I am more concerned about this part, Without limiting XYZ’s rights at law, the Recipient agrees to indemnify XYZ in respect of all claims, losses, liabilities, costs or expenses of any kind incurred directly or indirectly as a result of or in connection with a breach by it or any of its officers, employees, or consultants of this Agreement. Is it really common in IT industry to sign this agreement between client and developer? Any particular thing I should be concerned about?

  Read the article

• Twitter Tuesday - Top 10 @ArchBeat Tweets - August 12-18, 2014

  - by Bob Rhubart-Oracle

  Man in gray hat: "You know, more than three thousand people follow @OTNArchBeat on Twitter. I wonder which tweets were the most popular over the last seven days." Man in brown hat: "Shut up! I think I see a UFO!" Man in gray hat: "That's OK. I'll just read this blog post." RT @java: "Programmers are creative people and typically delight in contriving clever ways to solve problems." -Casimir Saternos in @OracleJavaMag Aug 18, 2014 at 12:54 PM The Offer Still Stands: Produce your own episode of the OTN ArchBeat Podcast. Click for details. Aug 13, 2014 at 02:03 PM Binge-Ready! Watch the Top 10 OTN ArchBeat Videos featuring @stewartbryson @stenvesterli @gurcanorhan Aug 13, 2014 at 11:49 AM Oracle Announces First Java 9 Features | InfoQ Aug 18, 2014 at 12:20 PM Getting Started wit the #Coherence Memcached Adaptor | David Felcey Aug 18, 2014 at 10:19 AM #WebLogic Data Source Connection Labeling | Steve Felts Aug 14, 2014 at 10:03 AM How to introduce #DevOps into a moribund corporate culture | ZDNet Aug 15, 2014 at 11:23 AM Sample Chapter: Installing Oracle #WebLogic Server 12c and Using the Management Tools | Sam Alapati Aug 14, 2014 at 11:09 AM Building a Responsive #WebCenter Portal Application | @JayJayZheng Aug 12, 2014 at 11:04 AM #OEM12c Cloud Control authorization with Active Directory | Jeroen Gouma Aug 14, 2014 at 10:16 AM

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? Update I tried changing the certificate attributes, but to no avail: openssl genrsa -des -passout pass:***** -out private/server.key 2048 openssl req -batch -passin pass:***** -new -x509 -nodes -sha256 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf

  Read the article

• estimating size of reply HTTP headers

  - by Guanidene

  I am trying to download a file via a basic socket connection, using a HTTP GET request. So, I have to specify how many bytes of data coming in I have to read from the socket. However, I am having trouble deciding the amount of data (say, in bytes) the server would reply back with. I know that there is a "Content-Length" field in the reply sent by server, but that gives me the size of the actual data (without the http headers). Is there a way to get the exact size of HTTP headers sent by the server or an estimation is required? (I am doing this for downloading on a mobile network, where every bit of data matters in terms of time and money, so I don't wish to make an unnecessary larger estimate of the header size.)

  Read the article

• Model a chain with different elements in Unity 3D

  - by Alex

  I have to model, in unity 3D, a chain that is composed of various elements. some flexible, some rigid. The idea is to realize a human-chain where each person is linked to the other by their hands. I've not tried to implement it yet as i've no idea on what could be a good way to do it. In the game i've to manage a lot of chains of people... maybe also 100 chains composed of 11-15 people. The chain will be pretty simple and there won't be much interaction... Probabily some animation of the people one at time for each chain and some physic reaction (for example pushing a people in a chain should slightle flex the chain) the very problem of this work is that in the chain each object is composed by flexible parts (arms) and rigid parts (the body) and that the connection should remain firm... just like when people handshake... hands are firm and are the wrists to move. i can use C4D to model the meshes. i know this number may cause performance problems, but it's also true i will use low-poly versions of human. (for the real it won't be human, but very simple toonish characters that have harms and legs). So actually i'm trying to find a way to manage this in a way it can work, the performance will be a later problem that i can solve. If there is not a fast 'best-practiced' solution and you have any link/guide/doc that could help me in finding a way to realize this is, it would be very appreciated anyway if you post it. thanks

  Read the article

• Load balancing + NAT issue on BNT GBE 2-7 gear

  - by Clément Game

  Hi guys, I've got troubles configuring an Hardware load-Balancer with NAT functions. I have the following architecture: Internet === VIP (public) LB (private ip) ==== private addressed servers When a connection is initialised from the outside (internet) , the LB correctly forwards the SYN packet to one of the private servers. But when these servers want to reply with a SYN/ACK there is a problem. the initial SYN packet had as ip header : VIP = Private_server_Address But the private servers cannot reach VIP from their side (this is normal since it's nated), and then provide a correct reply. Have you guys any solution to correctly forward the packets to their correct destination ? Note: The load balancer, which is the default gw for the servers, also has a NAT rule for "masquerading" (actually more SNAT than real masquerading) Regards, Clément.

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• "remote file operation failed" on Hudson

  - by Aveen

  I am running a Windows slave for Husdon 1.337 (Linux master). When running a project on the Windows node, it fails with the following message: Building remotely on winTestSlave Checking out a fresh workspace because there's no workspace at C:\hudson\***\ejb remote file operation failed It did work yesterday and I have not upgraded Hudson or changed its configurations (or the slave's configurations) in any way. I establish the connection between the slave and the master by running the following command on a cygwim prompt on the slave: java -jar slave.jar -jnlpUrl http://myserver/computer/winTestSlave/slave-agent.jnlp I saw the issue http://issues.hudson-ci.org/browse/HUDSON-5374 and did as instructed in the work-around but that did not work. I also tried with a newer version of slave.jar (version 1.356) but that did not work either. Does anyone please have any idea of how to fix this? I really cannot find more information anywhere else!

  Read the article

• Protect Windows VPN from Unauthorized Users

  - by kobaltz

  I have a VPN connection that I use while away from home to remote into my home network. I would use a zero config solution like Hamachi, but need access from my mobile device. Therefore, I have my Windows Home Server acting as the VPN server and will accept incoming connections. Both the username and password are strong. However, I'm worried about brute force attacks against my network. Is there something else that I should do to protect my network from having unauthorized access attempts to my network? I'm familiar with Linux's FAIL2BAN, but wasn't sure if something similar existing for Windows.

  Read the article

• Software Center Freezing on Xubuntu 12.10

  - by AC3

  Whenever I open Software center I get this error: 012-12-12 16:19:29,196 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/dbus/proxies.py', 410, '_introspect_error_handler')' 2012-12-12 16:19:29,196 - dbus.proxies - ERROR - Introspect error on :1.74:/com/ubuntu/Softwarecenter: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. 2012-12-12 16:19:54,713 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-12-12 16:19:54,816 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-12-12 16:19:55,705 - softwarecenter.region - WARNING - failed to use geoclue: 'org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Geoclue.Master was not provided by any .service files' 2012-12-12 16:19:56,575 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-12-12 16:19:56,592 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/gi/importer.py', 51, 'find_module')' 2012-12-12 16:19:56,592 - root - ERROR - Could not find any typelib for LaunchpadIntegration 2012-12-12 16:19:56,910 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-12-12 16:19:56,935 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Not sure if it is a bug or not, have uninstalled and reinstalled the program already with synaptic. Very little experience with linux and any help will be appreciated

  Read the article

• Windows Server 2008 r2 FTP blocking outside connections

  - by nbon

  I have a windows server 2008r2 running IIS 7.5. I am trying to setup a FTP-server in IIS but I'm running into some annoying problems. Setting up the server works fine but when I try to connect from a remote client the connection times out. I have tried to connect to the FTP-server from the localhost and it works flawlessly. I figured that it should be some trouble with the firewall so I went into firewall settings and disabled the Public Profile and my remote connections worked! In my inbound rules there are rules for FTP-connections to allow all profiles etc. I guess they are made automatically when setting up the FTP-server. Anyone got any idea how to allow remote connections without turning off the public firewall?

  Read the article

• Virtual Network Printer

  - by user113720

  I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >