Search Results

Search found 16560 results on 663 pages for 'far'.

Page 624/663 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• What's up with LDoms: Part 4 - Virtual Networking Explained

  - by Stefan Hinker

  I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking.  Basic connectivity as we've seen it in the first, simple example, is easy enough.  But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now.   In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only.  Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices.  The virtual switch should be seen just like a real ethernet switch.  It "runs" in the service domain and moves ethernet packets back and forth.  A virtual network device is plumbed in the guest domain.  It corresponds to a physical network device in the real world.  There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch.  In the virtual world, you do the same:  You create a virtual network device for your guest and connect it to a virtual switch in a service domain.  The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices.  Don't be confused, it's rather straight forward, really.  Let's start with the simple case, and work our way to some more sophisticated options later on.  In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment.  In the real world, you'd connect each of these systems to the same ethernet switch.  So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2.  In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch.  We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch.  They can now communicate with each other and with any system reachable via nxge2.  If primary were running Solaris 10, communication with the guests would not be possible.  This is different with Solaris 11, please see the Admin Guide for details.  Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one.  It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there.  However, if we want to do this manually, we can also do that.  (One reason might be firewall rules that work on MAC addresses.)  So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver.  In Solaris 10, they'd appear as "vnet0".  Solaris 11 would apply it's usual vanity naming scheme.  We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal.  In many cases, using Jumbo Frames helps increase throughput performance.  By default, these interfaces will run with the standard ethernet MTU of 1500 bytes.  To change this,  it is usually sufficient to set the desired MTU for the virtual switch.  This will automatically set the same MTU for all vnet devices attached to that switch.  Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000.  Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times.  As always, keeping a configuration simple will help avoid errors of all kind.  Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable.  And as such, this concept needs to be carried over into the virtual world.  Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44.  There might also be other VLANs on the wire, but the vswitch will ignore all those packets.  We also have two vnet devices, one for mars and one for venus.  Venus will see traffic from VLANs 33 and 44 only.  For VLAN 44, venus will need to configure a tagged interface "vnet44000".  For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic.  This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33.  Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44.  On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system.  It's the "id=<somenumber>" option available for both vswitches and vnet devices.  Normally, Solaris in the guest would enumerate network devices sequentially.  However, it has ways of remembering this initial numbering.  This is good in the physical world.  In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change.  Configuration confusion will follow suit.  To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far.  Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above.  I hope this is useful and, as always, I welcome any comments.

  Read the article

• Creating a Dynamic DataRow for easier DataRow Syntax

  - by Rick Strahl

  I've been thrown back into an older project that uses DataSets and DataRows as their entity storage model. I have several applications internally that I still maintain that run just fine (and I sometimes wonder if this wasn't easier than all this ORM crap we deal with with 'newer' improved technology today - but I disgress) but use this older code. For the most part DataSets/DataTables/DataRows are abstracted away in a pseudo entity model, but in some situations like queries DataTables and DataRows are still surfaced to the business layer. Here's an example. Here's a business object method that runs dynamic query and the code ends up looping over the result set using the ugly DataRow Array syntax:public int UpdateAllSafeTitles() { int result = this.Execute("select pk, title, safetitle from " + Tablename + " where EntryType=1", "TPks"); if (result < 0) return result; result = 0; foreach (DataRow row in this.DataSet.Tables["TPks"].Rows) { string title = row["title"] as string; string safeTitle = row["safeTitle"] as string; int pk = (int)row["pk"]; string newSafeTitle = this.GetSafeTitle(title); if (newSafeTitle != safeTitle) { this.ExecuteNonQuery("update " + this.Tablename + " set safeTitle=@safeTitle where pk=@pk", this.CreateParameter("@safeTitle",newSafeTitle), this.CreateParameter("@pk",pk) ); result++; } } return result; } The problem with looping over DataRow objecs is two fold: The array syntax is tedious to type and not real clear to look at, and explicit casting is required in order to do anything useful with the values. I've highlighted the place where this matters. Using the DynamicDataRow class I'll show in a minute this code can be changed to look like this:public int UpdateAllSafeTitles() { int result = this.Execute("select pk, title, safetitle from " + Tablename + " where EntryType=1", "TPks"); if (result < 0) return result; result = 0; foreach (DataRow row in this.DataSet.Tables["TPks"].Rows) { dynamic entry = new DynamicDataRow(row); string newSafeTitle = this.GetSafeTitle(entry.title); if (newSafeTitle != entry.safeTitle) { this.ExecuteNonQuery("update " + this.Tablename + " set safeTitle=@safeTitle where pk=@pk", this.CreateParameter("@safeTitle",newSafeTitle), this.CreateParameter("@pk",entry.pk) ); result++; } } return result; } The code looks much a bit more natural and describes what's happening a little nicer as well. Well, using the new dynamic features in .NET it's actually quite easy to implement the DynamicDataRow class. Creating your own custom Dynamic Objects .NET 4.0 introduced the Dynamic Language Runtime (DLR) and opened up a whole bunch of new capabilities for .NET applications. The dynamic type is an easy way to avoid Reflection and directly access members of 'dynamic' or 'late bound' objects at runtime. There's a lot of very subtle but extremely useful stuff that dynamic does (especially for COM Interop scenearios) but in its simplest form it often allows you to do away with manual Reflection at runtime. In addition you can create DynamicObject implementations that can perform  custom interception of member accesses and so allow you to provide more natural access to more complex or awkward data structures like the DataRow that I use as an example here. Bascially you can subclass DynamicObject and then implement a few methods (TryGetMember, TrySetMember, TryInvokeMember) to provide the ability to return dynamic results from just about any data structure using simple property/method access. In the code above, I created a custom DynamicDataRow class which inherits from DynamicObject and implements only TryGetMember and TrySetMember. Here's what simple class looks like:/// <summary> /// This class provides an easy way to turn a DataRow /// into a Dynamic object that supports direct property /// access to the DataRow fields. /// /// The class also automatically fixes up DbNull values /// (null into .NET and DbNUll to DataRow) /// </summary> public class DynamicDataRow : DynamicObject { /// <summary> /// Instance of object passed in /// </summary> DataRow DataRow; /// <summary> /// Pass in a DataRow to work off /// </summary> /// <param name="instance"></param> public DynamicDataRow(DataRow dataRow) { DataRow = dataRow; } /// <summary> /// Returns a value from a DataRow items array. /// If the field doesn't exist null is returned. /// DbNull values are turned into .NET nulls. /// /// </summary> /// <param name="binder"></param> /// <param name="result"></param> /// <returns></returns> public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; try { result = DataRow[binder.Name]; if (result == DBNull.Value) result = null; return true; } catch { } result = null; return false; } /// <summary> /// Property setter implementation tries to retrieve value from instance /// first then into this object /// </summary> /// <param name="binder"></param> /// <param name="value"></param> /// <returns></returns> public override bool TrySetMember(SetMemberBinder binder, object value) { try { if (value == null) value = DBNull.Value; DataRow[binder.Name] = value; return true; } catch {} return false; } } To demonstrate the basic features here's a short test: [TestMethod] [ExpectedException(typeof(RuntimeBinderException))] public void BasicDataRowTests() { DataTable table = new DataTable("table"); table.Columns.Add( new DataColumn() { ColumnName = "Name", DataType=typeof(string) }); table.Columns.Add( new DataColumn() { ColumnName = "Entered", DataType=typeof(DateTime) }); table.Columns.Add(new DataColumn() { ColumnName = "NullValue", DataType = typeof(string) }); DataRow row = table.NewRow(); DateTime now = DateTime.Now; row["Name"] = "Rick"; row["Entered"] = now; row["NullValue"] = null; // converted in DbNull dynamic drow = new DynamicDataRow(row); string name = drow.Name; DateTime entered = drow.Entered; string nulled = drow.NullValue; Assert.AreEqual(name, "Rick"); Assert.AreEqual(entered,now); Assert.IsNull(nulled); // this should throw a RuntimeBinderException Assert.AreEqual(entered,drow.enteredd); } The DynamicDataRow requires a custom constructor that accepts a single parameter that sets the DataRow. Once that's done you can access property values that match the field names. Note that types are automatically converted - no type casting is needed in the code you write. The class also automatically converts DbNulls to regular nulls and vice versa which is something that makes it much easier to deal with data returned from a database. What's cool here isn't so much the functionality - even if I'd prefer to leave DataRow behind ASAP -  but the fact that we can create a dynamic type that uses a DataRow as it's 'DataSource' to serve member values. It's pretty useful feature if you think about it, especially given how little code it takes to implement. By implementing these two simple methods we get to provide two features I was complaining about at the beginning that are missing from the DataRow: Direct Property Syntax Automatic Type Casting so no explicit casts are required Caveats As cool and easy as this functionality is, it's important to understand that it doesn't come for free. The dynamic features in .NET are - well - dynamic. Which means they are essentially evaluated at runtime (late bound). Rather than static typing where everything is compiled and linked by the compiler/linker, member invokations are looked up at runtime and essentially call into your custom code. There's some overhead in this. Direct invocations - the original code I showed - is going to be faster than the equivalent dynamic code. However, in the above code the difference of running the dynamic code and the original data access code was very minor. The loop running over 1500 result records took on average 13ms with the original code and 14ms with the dynamic code. Not exactly a serious performance bottleneck. One thing to remember is that Microsoft optimized the DLR code significantly so that repeated calls to the same operations are routed very efficiently which actually makes for very fast evaluation. The bottom line for performance with dynamic code is: Make sure you test and profile your code if you think that there might be a performance issue. However, in my experience with dynamic types so far performance is pretty good for repeated operations (ie. in loops). While usually a little slower the perf hit is a lot less typically than equivalent Reflection work. Although the code in the second example looks like standard object syntax, dynamic is not static code. It's evaluated at runtime and so there's no type recognition until runtime. This means no Intellisense at development time, and any invalid references that call into 'properties' (ie. fields in the DataRow) that don't exist still cause runtime errors. So in the case of the data row you still get a runtime error if you mistype a column name:// this should throw a RuntimeBinderException Assert.AreEqual(entered,drow.enteredd); Dynamic - Lots of uses The arrival of Dynamic types in .NET has been met with mixed emotions. Die hard .NET developers decry dynamic types as an abomination to the language. After all what dynamic accomplishes goes against all that a static language is supposed to provide. On the other hand there are clearly scenarios when dynamic can make life much easier (COM Interop being one place). Think of the possibilities. What other data structures would you like to expose to a simple property interface rather than some sort of collection or dictionary? And beyond what I showed here you can also implement 'Method missing' behavior on objects with InvokeMember which essentially allows you to create dynamic methods. It's all very flexible and maybe just as important: It's easy to do. There's a lot of power hidden in this seemingly simple interface. Your move…© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  .NET   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• The Low Down Dirty Azure Blues

  - by SGWellens

  Remember the SETI screen savers that used to be on everyone's computer? As far I as know, it was the first bona-fide use of "Cloud" computing…albeit an ad hoc cloud. I still think it was a brilliant leveraging of computing power. My interest in clouds was re-piqued when I went to a technical seminar at the local .Net User Group. The speaker was Mike Benkovitch and he expounded magnificently on the virtues of the Azure platform. Mike always does a good job. One killer reason he gave for cloud computing is instant scalability. Not applicable for most applications, but it is there if needed. I have a bunch of files stored on Microsoft's SkyDrive platform which is cloud storage. It is painfully slow. Accessing a file means going through layers and layers of software, redirections and security. Am I complaining? Hell no! It's free! So my opinions of Cloud Computing are both skeptical and appreciative. What intrigued me at the seminar, in addition to its other features, is that Azure can serve as a web hosting platform. I have a client with an Asp.Net web site I developed who is not happy with the performance of their current hosting service. I checked the cost of Azure and since the site has low bandwidth/space requirements the cost would be competitive with the existing host provider: Azure Pricing Calculator. And, Azure has a three month free trial. Perfect! I could try moving the website and see how it works for free. I went through the signup process. Everything was proceeding fine until I went to the MS SQL database management screen. A popup window informed me that I needed to install Silverlight on my machine. Silverlight? No thanks. Buh-Bye. I half-heartedly found the Azure support button and logged a ticket telling them I didn't want Silverlight on my machine. Within 4 to 6 hours (and a myriad (5) of automated support emails) they sent me a link to a database management page that did not require Silverlight. Thanks! I was able to create a database immediately. One really nice feature was that after creating the database, I was given a list of connection strings. I went to the current host provider, made a backup of the database and saved it to my machine. I attached to the remote database using SQL Server Studio 2012 and looked for the Restore menu item. It was missing. So I tried using the SQL command: RESTORE DATABASE MyDatabase FROM DISK ='C:\temp\MyBackup.bak' Msg 40510, Level 16, State 1, Line 1 Statement 'RESTORE DATABASE' is not supported in this version of SQL Server. Are you kidding me? Why on earth…? This can't be happening! I opened both the source database and destination database in SQL Management Studio. I right clicked the source database, selected "Tasks" and noticed a menu selection called "Deploy Database to SQL Azure" Are you kidding me? Could it be? Oh yes, it be! There was a small problem because the database already existed on the Azure machine, I deployed to a new name, deleted the existing database and renamed the deployed database to what I needed. It was ridiculously easy. Being able to attach SQL Management Studio to remote databases is an awesome but scary feature. You can limit the IP addresses that can access the database which enhances security but when you give people, any people, me included, that much power, one errant mouse click could bring a live system down. My Advice: Tread softly and carry a large backup thumb-drive. Then I created a web site, the URL it returned look something like this: http://MyWebSite.azurewebsites.net/ Azure supports FTP, but I couldn't figure out the settings until I downloaded the publishing profile. It was an XML file that contained the needed information. I still couldn't connect with my FTP client (FileZilla). After about an hour of messing around, I deleted the port number from the FileZilla setup page….and voila, I was in like Flynn.   There are other options of deploying directly from Visual Studio, TFS, etc. but I do not like integrated tools that do things without my asking: It's usually hard to figure out what they did and how to undo it. I uploaded the aspx , cs , webconfig, etc. files. Bu it didn't run. The site I ported was in .NET 3.5. The Azure website configuration page gave me a choice between .NET 2.0 and 4.0. So, I switched to Visual Studio 2010, chose .NET 4.0 and upgraded the site. Of course I have the original version completely backed up and stored in a granite cave beneath the Nevada desert. And I have a backup CD under my pillow. The site uses ReportViewer to generate PDF documents. Of course it was the wrong version. I removed the old references to version 9 and added new references to version 10 (*see note below). Since the DLLs were not on the Azure Server, I uploaded them to the bin directory, crossed my fingers, burned some incense and gave it a try. After some fiddling around it ran. I don't know if I did anything particular to make it work or it just needed time to sort things out. However, one critical feature didn't work: ReportViewer could not programmatically generate PDF documents. I was getting this exception: "An error occurred during local report processing. Parameter is not valid." Rats. I did some searching and found other people were having the same problem, so I added a post saying I was having the same problem: http://social.msdn.microsoft.com/Forums/en-US/windowsazurewebsitespreview/thread/b4a6eb43-0013-435f-9d11-00ee26a8d017 Currently they are looking into this problem and I am waiting for the results. Hence I had the time to write this BLOG entry. How lucky you are. This was the last message I got from the Microsoft person: Hi Steve, Windows Azure Web Sites is a multi-tenant environment. For security issue, we limited some API calls. Unfortunately, some GDI APIS required by the PDF converting function are in this list. We have noticed this issue, and still investigation the best way to go. At this moment, there is no news to share. Sorry about this. Will keep you posted. If I had to guess, I would say they are concerned with people uploading images and doing intensive graphics programming which would hog CPU time.  But that is just a guess. Another problem. While trying to resolve the ReportViewer problem, I tried to write a file to the PDF directory to see if there was a permissions problem with some test code: String MyPath = MapPath(@"~\PDFs\Test.txt"); File.WriteAllText(MyPath, "Hello Azure");     I got this message: Access to the path <my path> is denied. After some research, I understood that since Azure is a cloud based platform, it can't allow web applications to save files to local directories. The application could be moved or replicated as scaling occurs and trying to manage local files would be problematic to say the least. There are other options: Use the Azure APIs to get a path. That way the location of the storage is separated from the application. However, the web site is then tied Azure and can't be moved to another hosting platform. Use the ApplicationData folder (not recommended). Write to BLOB storage. Or, I could try and stream the PDF output directly to the email and not save a file. I'm not going to work on a final solution until the ReportViewer is fixed. I am just sharing some of the things you need to be aware of if you decide to use Azure. I got this information from here. (Note the author of the BLOG added a comment saying he has updated his entry). Is my memory faulty? While getting this BLOG ready, I tried to write the test file again. And it worked. My memory is incorrect, or much more likely, something changed on the server…perhaps while they are trying to get ReportViewer to work. (Anyway, that's my story and I'm sticking to it). *Note: Since Visual Studio 2010 Express doesn't include a Report Editor, I downloaded and installed SQL Server Report Builder 2.0. It is a standalone Report Editor to replace the one not in Visual Studio 2010 Express. I hope someone finds this useful. Steve Wellens CodeProject

  Read the article

• Launching a WPF Window in a Separate Thread, Part 1

  - by Reed

  Typically, I strongly recommend keeping the user interface within an application’s main thread, and using multiple threads to move the actual “work” into background threads.  However, there are rare times when creating a separate, dedicated thread for a Window can be beneficial.  This is even acknowledged in the MSDN samples, such as the Multiple Windows, Multiple Threads sample.  However, doing this correctly is difficult.  Even the referenced MSDN sample has major flaws, and will fail horribly in certain scenarios.  To ease this, I wrote a small class that alleviates some of the difficulties involved. The MSDN Multiple Windows, Multiple Threads Sample shows how to launch a new thread with a WPF Window, and will work in most cases.  The sample code (commented and slightly modified) works out to the following: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create and show the Window Window1 tempWindow = new Window1(); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Set the apartment state newWindowThread.SetApartmentState(ApartmentState.STA); // Make the thread a background thread newWindowThread.IsBackground = true; // Start the thread newWindowThread.Start(); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This sample creates a thread, marks it as single threaded apartment state, and starts the Dispatcher on that thread. That is the minimum requirements to get a Window displaying and handling messages correctly, but, unfortunately, has some serious flaws. The first issue – the created thread will run continuously until the application shuts down, given the code in the sample.  The problem is that the ThreadStart delegate used ends with running the Dispatcher.  However, nothing ever stops the Dispatcher processing.  The thread was created as a Background thread, which prevents it from keeping the application alive, but the Dispatcher will continue to pump dispatcher frames until the application shuts down. In order to fix this, we need to call Dispatcher.InvokeShutdown after the Window is closed.  This would require modifying the above sample to subscribe to the Window’s Closed event, and, at that point, shutdown the Dispatcher: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This eliminates the first issue.  Now, when the Window is closed, the new thread’s Dispatcher will shut itself down, which in turn will cause the thread to complete. The above code will work correctly for most situations.  However, there is still a potential problem which could arise depending on the content of the Window1 class.  This is particularly nasty, as the code could easily work for most windows, but fail on others. The problem is, at the point where the Window is constructed, there is no active SynchronizationContext.  This is unlikely to be a problem in most cases, but is an absolute requirement if there is code within the constructor of Window1 which relies on a context being in place. While this sounds like an edge case, it’s fairly common.  For example, if a BackgroundWorker is started within the constructor, or a TaskScheduler is built using TaskScheduler.FromCurrentSynchronizationContext() with the expectation of synchronizing work to the UI thread, an exception will be raised at some point.  Both of these classes rely on the existence of a proper context being installed to SynchronizationContext.Current, which happens automatically, but not until Dispatcher.Run is called.  In the above case, SynchronizationContext.Current will return null during the Window’s construction, which can cause exceptions to occur or unexpected behavior. Luckily, this is fairly easy to correct.  We need to do three things, in order, prior to creating our Window: Create and initialize the Dispatcher for the new thread manually Create a synchronization context for the thread which uses the Dispatcher Install the synchronization context Creating the Dispatcher is quite simple – The Dispatcher.CurrentDispatcher property gets the current thread’s Dispatcher and “creates a new Dispatcher if one is not already associated with the thread.”  Once we have the correct Dispatcher, we can create a SynchronizationContext which uses the dispatcher by creating a DispatcherSynchronizationContext.  Finally, this synchronization context can be installed as the current thread’s context via SynchronizationContext.SetSynchronizationContext.  These three steps can easily be added to the above via a single line of code: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create our context, and install it: SynchronizationContext.SetSynchronizationContext( new DispatcherSynchronizationContext( Dispatcher.CurrentDispatcher)); Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This now forces the synchronization context to be in place before the Window is created and correctly shuts down the Dispatcher when the window closes. However, there are quite a few steps.  In my next post, I’ll show how to make this operation more reusable by creating a class with a far simpler API…

  Read the article

• Interview with Lenz Grimmer about MySQL Connect

  - by Keith Larson

  Keith Larson: Thank you for allowing me to do this interview with you.  I have been talking with a few different Oracle ACEs   about the MySQL Connect Conference. I figured the MySQL community might be missing you as well. You have been very busy with Oracle Linux but I know you still have an eye on the MySQL Community. How have things been?Lenz Grimmer: Thanks for including me in this series of interviews, I feel honored! I've read the other interviews, and really liked them. I still try to follow what's going on over in the MySQL community and it's good to see that many of the familiar faces are still around. Over the course of the 9 years that I was involved with MySQL, many colleagues and contacts turned into good friends and we still maintain close relationships.It's been almost 1.5 years ago that I moved into my new role here in the Linux team at Oracle, and I really enjoy working on a Linux distribution again (I worked for SUSE before I joined MySQL AB in 2002). I'm still learning a lot - Linux in the data center has greatly evolved in so many ways and there are a lot of new and exciting technologies to explore. Keith Larson: What were your thoughts when you heard that Oracle was going to deliver the MySQL Connect conference to the MySQL Community?Lenz Grimmer: I think it's testament to the fact that Oracle deeply cares about MySQL, despite what many skeptics may say. What started as "MySQL Sunday" two years ago has now evolved into a full-blown sub-conference, with 80 sessions at one of the largest corporate IT events in the world. I find this quite telling, not many products at Oracle enjoy this level of exposure! So it certainly makes me feel proud to see how far MySQL has come. Keith Larson: Have you had a chance to look over the sessions? What are your thoughts on them?Lenz Grimmer: I did indeed look at the final schedule.The content committee did a great job with selecting these sessions. I'm glad to see that the content selection was influenced by involving well-known and respected members of the MySQL community. The sessions cover a broad range of topics and technologies, both covering established topics as well as recent developments. Keith Larson: When you get a chance, what sessions do you plan on attending?Lenz Grimmer: I will actually be manning the Oracle booth in the exhibition area on one of these days, so I'm not sure if I'll have a lot of time attending sessions. But if I do, I'd love to see the keynotes and catch some of the sessions that talk about recent developments and new features in MySQL, High Availability and Clustering . Quite a lot has happened and it's hard to keep up with this constant flow of new MySQL releases.In particular, the following sessions caught my attention: MySQL Connect Keynote: The State of the Dolphin Evaluating MySQL High-Availability Alternatives CERN’s MySQL “as a Service” Deployment with Oracle VM: Empowering Users MySQL 5.6 Replication: Taking Scalability and High Availability to the Next Level What’s New in MySQL Server 5.6? MySQL Security: Past and Present MySQL at Twitter: Development and Deployment MySQL Community BOF MySQL Connect Keynote: MySQL Perspectives Keith Larson: So I will ask you just like I have asked the others I have interviewed, any tips that you would give to people for handling the long hours at conferences?Lenz Grimmer: Wear comfortable shoes and make sure to drink a lot! Also prepare a plan of the sessions you would like to attend beforehand and familiarize yourself with the venue, so you can get to the next talk in time without scrambling to find the location. The good thing about piggybacking on such a large conference like Oracle OpenWorld is that you benefit from the whole infrastructure. For example, there is a nice schedule builder that helps you to keep track of your sessions of interest. Other than that, bring enough business cards and talk to people, build up your network among your peers and other MySQL professionals! Keith Larson: What features of the MySQL 5.6 release do you look forward to the most ?Lenz Grimmer: There has been solid progress in so many areas like the InnoDB Storage Engine, the Optimizer, Replication or Performance Schema, it's hard for me to really highlight anything in particular. All in all, MySQL 5.6 sounds like a very promising release. I'm confident it will follow the tradition that Oracle already established with MySQL 5.5, which received a lot of praise even from very critical members of the MySQL community. If I had to name a single feature, I'm particularly and personally happy that the precise GIS functions have finally made it into a GA release - that was long overdue. Keith Larson:  In your opinion what is the best reason for someone to attend this event?Lenz Grimmer: This conference is an excellent opportunity to get in touch with the key people in the MySQL community and ecosystem and to get facts and information from the domain experts and developers that work on MySQL. The broad range of topics should attract people from a variety of roles and relations to MySQL, beginning with Developers and DBAs, to CIOs considering MySQL as a viable solution for their requirements. Keith Larson: You will be attending MySQL Connect and have some Oracle Linux Demos, do you see a growing demand for MySQL on Oracle Linux ?Lenz Grimmer: Yes! Oracle Linux is our recommended Linux distribution and we have a good relationship to the MySQL engineering group. They use Oracle Linux as a base Linux platform for development and QA, so we make sure that MySQL and Oracle Linux are well tested together. Setting up a MySQL server on Oracle Linux can be done very quickly, and many customers recognize the benefits of using them both in combination.Because Oracle Linux is available for free (including free bug fixes and errata), it's an ideal choice for running MySQL in your data center. You can run the same Linux distribution on both your development/staging systems as well as on the production machines, you decide which of these should be covered by a support subscription and at which level of support. This gives you flexibility and provides some really attractive cost-saving opportunities. Keith Larson: Since I am a Linux user and fan, what is on the horizon for  Oracle Linux?Lenz Grimmer: We're working hard on broadening the ecosystem around Oracle Linux, building up partnerships with ISVs and IHVs to certify Oracle Linux as a fully supported platform for their products. We also continue to collaborate closely with the Linux kernel community on various projects, to make sure that Linux scales and performs well on large systems and meets the demands of today's data centers. These improvements and enhancements will then rolled into the Unbreakable Enterprise Kernel, which is the key ingredient that sets Oracle Linux apart from other distributions. We also have a number of ongoing projects which are making good progress, and I'm sure you'll hear more about this at the upcoming OpenWorld conference :) Keith Larson: What is something that more people should be aware of when it comes to Oracle Linux and MySQL ?Lenz Grimmer: Many people assume that Oracle Linux is just tuned for Oracle products, such as the Oracle Database or our Engineered Systems. While it's of course true that we do a lot of testing and optimization for these workloads, Oracle Linux is and will remain a general-purpose Linux distribution that is a very good foundation for setting up a LAMP-Stack, for example. We also provide MySQL RPM packages for Oracle Linux, so you can easily stay up to date if you need something newer than what's included in the stock distribution.One more thing that is really unique to Oracle Linux is Ksplice, which allows you to apply security patches to the running Linux kernel, without having to reboot. This ensures that your MySQL database server keeps up and running and is not affected by any downtime. Keith Larson: What else would you like to add ?Lenz Grimmer: Thanks again for getting in touch with me, I appreciated the opportunity. I'm looking forward to MySQL Connect and Oracle OpenWorld and to meet you and many other people from the MySQL community that I haven't seen for quite some time! Keith Larson:  Thank you Lenz!

  Read the article

• CodePlex Daily Summary for Sunday, June 13, 2010

  CodePlex Daily Summary for Sunday, June 13, 2010New ProjectsCurve Drawer: A Java project to explore the possibilities of drawing curves and knots.File Manager Redux: .NET version of the original File Manager.Hierachical Gantt Chart In SharePoint 2010: This solution makes it easier for shedule management. We will provide a wsp including a list definition and a custom gantt control. The list defi...Light Box Control for Asp.Net: Lightbox control for asp.net is used to display the thumbnail images. on clicking the thumbnail images the original images is displayed in the ligh...Linquify: Linquify is a Visual Studio 2008/2010 Addin and C# .NET business class / DTO generator for LINQ to SQL and the Entity Framework. It supports rapid ...Microsoft Dynamics CRM Query - T4 Template: A T4 Template that generates code that leverages LINQ to SQL and the Microsoft Dynamics CRM API to give a CRM data access solution. There is also ...Open Sound Control Library: A .NET Library for the Open Sound Control Protocol. This library makes it easy to use devices which communicate via OSC.Questionable Content Screensaver: A screensaver for the questionable content comic. It is written in C#, and uses the windows presentation foundation. See the comic at http://ww...Reflect: Reflect is an open source .NET reflection tool used for viewing metadata of .NET assemblies.runescape 602 client tools and server: runescape 602 client tools and serverSharpCrack: Hash cracker written in managed code.SilverCAT project: This is my Windows Azure study project. So far I did not find any value to share it to the public. If I find it out one day, I will add hereSilverStackAPI: My entry for the Stack Exchange API contest. A silverlight library and demo app.social bookmark control for asp.net: social bookmark control for asp.net, This control is used to bookmark the current asp.net page into popular social networking sites like facebook, ...SSIS Event Log Source: An SSIS 2005 Data Source component for loading Windows 2003/XP event logs (*.evt) into SQL Server 2005 for analysisUnOfficial ActiveWorlds Wrapper.Net: UnOfficial ActiveWorlds Wrapper .Net makes it easier for programmers to make active worlds bots. You'll no longer have to make it by yourself. It'...Using Named Pipe and self-elevation feature of Vista in a console application.: NPipeWithElevatedProc, make it easier for console application users, running programs with administrator privileges. The processing messages are al...Virtual Keyboard control for asp.net: Virtual Keyboard control for asp.net, This control is used to get the secured inputs through virtual keyboards.Visual Studio 2010 PowerShell Code Generator: Brings rich PowerShell functionalities into VS Templating. You can access the file system, the registry, and many other PowerShell features. You ca...WatchersNET.UrlShorty: This Module allows users to shorten a long URL and share it, this is a similiar service to web services like bit.ly, tinyurl.com and others. It als...New ReleasesBD File Hash: BD File Hash 1.0.5: The first public release of BD File Hash.Cassandraemon: Cassandraemon 0.6.0: Cassandraemon is LINQ Provider for Apache Cassandra. This is first release of Cassandraemon. Features You can Query by LINQ Support Regist, Del...Community Forums NNTP bridge: Community Forums NNTP Bridge V36: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Curve Drawer: Alpha 1: Basic functionality is available to draw curves and clear them.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 09.32: see Source Code tab for recent change historyDEWD: DEWD for Umbraco v1.0 (beta-2): Beta release of the package. Functional feature set and fairly stable. Since the last release: Default values (support for dynamic values such as t...Fiddler TreeView Panel Extension: FiddlerTreeViewPanel 0.71: Added support for double-click to expand/collapse all child nodes. Keep selected node when losing focus from the TreeView. Please refer to http://...HKGolden Express: HKGoldenExpress (Build 201006130200): New features: User can reply to message with quoting others' message. Bug fix: Incorrect format of dynamically generated Sitemap XML. Improveme...Liekhus ADO.NET Entity Data Model XAF Extensions: Version 1.1.2: Latest patches and changes.Light Box Control for Asp.Net: Light Box Control for asp.net: Lightbox control for asp.net is used to display the thumbnail images. on clicking the thumbnail images the original images is displayed in the ligh...Lightweight Fluent Workflow: Objectflow 1.1.0.0: This release has support for multi-threaded operations. As this required significant changes to the fluent interface I have introduced breaking ch...Linquify: Linquify 1.6: Linquify 1.6 Includes: - Support for Entity Framework foreign keys - TransactionsLiteFx: LiteFx Alpha: Versão alpha do LiteFx.Microsoft Dynamics CRM Query - T4 Template: MS CRM Query T4 Template Version 0.5 Beta: Initial ReleaseNHibernate Membership Provider: NHibernate Membership Provider 0.9c: This is an updated source package with updated unit tests and some minor refactoring.NLog - Advanced .NET Logging: Nightly Build 2010.06.12.001: Changes since the last build:2010-06-12 10:42:41 Jarek Kowalski Added Width, Height, AutoScroll and MaxLines parameters to RichTextBoxTarget. 2010...Radical: Radical 1.0.1 (Vacuum): First drop with support for Windows Phone 7SharpCrack: SharpCrack v0.8: First release of SharpCrack. It does not support brute-force mode.social bookmark control for asp.net: social bookmark control for asp.net: social bookmark control for asp.net, This control is used to bookmark the current asp.net page into popular social networking sites like facebook, ...StardustExtensions: Simple hello: This is a very simple hello world script. Is just a basic script, is not packaged and works on IronPythonTiledLib: TiledLib 1.5: This release introduces breaking changes from 1.2. If you upgrade to this version from 1.2, you may have compiler errors and/or runtime differences...UDC indexes parser: UDC Parser RC1: Обновлена библиотека токенов, добавлены xml-doc комментарии, обновлен и исправлен код, обновлена логика лексера, обновлена грамматика парсера. Доба...UnOfficial ActiveWorlds Wrapper.Net: UnOfficial ActiveWorlds Wrapper.Net V0.5.85.1: NewLogin Structure. LaserBeam. ChangedOld Functions Changes Function Names Old New WorldInstanceSet SetWorldInstance WorldInstanceGet GetWo...UrzaGatherer: UrzaGatherer v2.0.2a: Inegration of VS Installer.VCC: Latest build, v2.1.30612.0: Automatic drop of latest buildVirtual Keyboard control for asp.net: virtual keyboard control: Virtual Keyboard control for asp.net, This control is used to get the secured inputs through virtual keyboards.Visual Studio 2010 PowerShell Code Generator: PSCodeGenerator: How to install PowerShell Code GeneratorDownload the zip Unzip Run .\Install-PSCodeGenerator.ps1 at the PowerShell console prompt Copies the te...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 25 Beta: Build 25 (beta) New: Added support for Filter items (virtual folders) in Solution Explorer. New: Added "Get Lock..." to Solution Explorer context...WatchersNET.UrlShorty: WatchersNET.UrlShorty 01.00.00: First BETA Release Please Read the Readme or the Online Documentation for Install Instructions.Yet Another GPS: Release Beta 2.1: Release Beta 2.1: - Fix KML Template with Google Map Mobile Version - Add Signal Strength indecator - Add Time indecator - Fix Sound Language Prob...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active Projectspatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRhyduino - Arduino and Managed CodeBlogEngine.NETCommunity Forums NNTP bridgeCassandraemonMediaCoder.NETAndrew's XNA HelpersMicrosoft Silverlight Media Framework

  Read the article

• Building the Ultimate SharePoint 2010 Development Environment

  - by Manesh Karunakaran

  It’s been more than a month since SharePoint 2010 RTMed. And a lot of people have downloaded and set up their very own SharePoint 2010 development rigs. And quite a few people have written blogs about setting up good development environments, there is even an MSDN article on it. Two of the blogs worth noting are from MVPs Sahil Malik and Wictor Wilén. Make sure that you check these out as well. Part of the bad side-effects of being a geek is the need to do the technical stuff the best way possible (pragmatic or otherwise), but the problem with this is that what is considered “best” is relative. Precisely the reason why you are reading this post now. Most of the posts that I read are out dated/need updations or are using the wrong OS’es or virtualization solutions (again, opinions vary) or using them the wrong way. Here’s a developer’s view of Building the Ultimate SharePoint 2010 Development Rig. If you are a sales guy, it’s time to close this window. Confusion 1: Which Host Operating System and Virtualization Solution to use? This point has been beaten to death in numerous blog posts in the past, if you have time to invest, read this excellent post by our very own SharePoint Joel on this subject. But if you are planning to build the Ultimate Development Rig, then Windows Server 2008 R2 with Hyper-V is the option that you should be looking at. I have been using this as my primary OS for about 6-7 months now, and I haven’t had any Driver issue or Application compatibility issue. In my experience all the Windows 7 drivers work fine with WIN2008 R2 also. You can enable Aero for eye candy (and the Windows 7 look and feel) and except for a few things like the Hibernation support (which a can be enabled if you really want it), Windows Server 2008 R2, is the best Workstation OS that I have used till date. But frankly the answer to this question of which OS to use depends primarily on one question - Are you willing to change your primary OS? If the answer to that is ‘Yes’, then Windows 2008 R2 with Hyper-V is the best option, if not look at vmWare or VirtualBox, both are equally good. Those who are familiar with a Virtual PC background might prefer Sun VirtualBox. Besides, these provide support for running 64 bit guest machines on 32 bit hosts if the underlying hardware is truly 64 bit. See my earlier post on this. Since we are going to make the ultimate rig, we will use Windows Server 2008 R2 with Hyper-V, for reasons mentioned above. Confusion 2: Should I use a multi-(virtual) server set up? A lot of people use multiple servers for their development environments - like Wictor Wilén is suggesting - one server hosting the Active directory, one hosting SharePoint Server and another one for SQL Server. True, this mimics the production environment the best possible way, but as somebody who has fallen for this set up earlier, I can tell you that you don’t really get anything by doing this. Microsoft has done well to ensure that if you can do it on one machine, you can do it in a farm environment as well. Besides, when you run multiple Server class machine instances in parallel, there are a lot of unwanted processor cycles wasted for no good use. In my personal experience, as somebody who needs to switch between MOSS 2007/SharePoint 2010 environments from time to time, the best possible solution is to Make the host Windows Server 2008 R2 machine your Domain Controller (AD Server) Make all your Virtual Guest OS’es join this domain. Have each Individual Guest OS Image have it’s own local SQL Server instance. The advantages are that you can reuse the users and groups in each of the Guest operating systems, you can manage the users in one place, AD is light weight and doesn't take too much resources on your host machine and also having separate SQL instances for each of the Development images gives you maximum flexibility in terms of configuration, for example your SharePoint rigs can have simpler DB configurations, compared to your MS BI blast pits. Confusion 3: Which Operating System should I use to run SharePoint 2010 Now that’s a no brainer. Use Windows 2008 R2 as your Guest OS. When you are building the ultimate rig, why compromise? If you are planning to run Windows Server 2008 as your Guest OS, there are a few patches that you need to install at different times during the installation, for that follow the steps mentioned here Okay now that we have made our choices, let’s get to the interesting part of building the rig, Step 1: Prepare the host machine – Install Windows Server 2008 R2 Install Windows Server 2008 R2 on your best Desktop/Laptop. If you have read this far, I am quite sure that you are somebody who can install an OS on your own, so go ahead and do that. Make sure that you run the compatibility wizard before you go ahead and nuke your current OS. There are plenty of blogs telling you how to make a good Windows 2008 R2 Workstation that feels and behaves like a Windows 7 machine, follow one and once you are done, head to Step 2. Step 2: Configure the host machine as a Domain Controller Before we begin this, let me tell you, this step is completely optional, you don’t really need to do this, you can simply use the local users on the Guest machines instead, but if this is a much cleaner approach to manage users and groups if you run multiple guest operating systems.  This post neatly explains how to configure your Windows Server 2008 R2 host machine as a Domain Controller. Follow those simple steps and you are good to go. If you are not able to get it to work, try this. Step 3: Prepare the guest machine – Install Windows Server 2008 R2 Open Hyper-V Manager Choose to Create a new Guest Operating system Allocate at least 2 GB of Memory to the Guest OS Choose the Windows 2008 R2 Installation Media Start the Virtual Machine to commence installation. Once the Installation is done, Activate the OS. Step 4: Make the Guest operating systems Join the Domain This step is quite simple, just follow these steps below, Fire up Hyper-V Manager, open your Guest OS Click on Start, and Right click on ‘Computer’ and choose ‘Properties’ On the window that pops-up, click on ‘Change Settings’ On the ‘System Properties’ Window that comes up, Click on the ‘Change’ button Now a window named ‘Computer Name/Domain Changes’ opens up, In the text box titled Domain, type in the Domain name from Step 2. Click Ok and windows will show you the welcome to domain message and ask you to restart the machine, click OK to restart. If the addition to domain fails, that means that you have not set up networking in Hyper-V for the Guest OS to communicate with the Host. To enable it, follow the steps I had mentioned in this post earlier. Step 5: Install SQL Server 2008 R2 on the Guest Machine SQL Server 2008 R2 gets installed with out hassle on Windows Server 2008 R2. SQL Server 2008 needs SP2 to work properly on WIN2008 R2. Also SQL Server 2008 R2 allows you to directly add PowerPivot support to SharePoint. Choose to install in SharePoint Integrated Mode in Reporting Server Configuration. Step 6: Install KB971831 and SharePoint 2010 Pre-requisites Now install the WCF Hotfix for Microsoft Windows (KB971831) from this location, and SharePoint 2010 Pre-requisites from the SP2010 Installation media. Step 7: Install and Configure SharePoint 2010 Install SharePoint 2010 from the installation media, after the installation is complete, you are prompted to start the SharePoint Products and Technologies Configuration Wizard. If you are using a local instance of Microsoft SQL Server 2008, install the Microsoft SQL Server 2008 KB 970315 x64 before starting the wizard. If your development environment uses a remote instance of Microsoft SQL Server 2008 or if it has a pre-existing installation of Microsoft SQL Server 2008 on which KB 970315 x64 has already been applied, this step is not necessary. With the wizard open, do the following: Install SQL Server 2008 KB 970315 x64. After the Microsoft SQL Server 2008 KB 970315 x64 installation is finished, complete the wizard. Alternatively, you can choose not to run the wizard by clearing the SharePoint Products and Technologies Configuration Wizard check box and closing the completed installation dialog box. Install SQL Server 2008 KB 970315 x64, and then manually start the SharePoint Products and Technologies Configuration Wizard by opening a Command Prompt window and executing the following command: C:\Program Files\Common Files\Microsoft Shared Debug\Web Server Extensions\14\BIN\psconfigui.exe The SharePoint Products and Technologies Configuration Wizard may fail if you are using a computer that is joined to a domain but that is not connected to a domain controller. Step 8: Install Visual Studio 2010 and SharePoint 2010 SDK Install Visual Studio 2010 Download and Install the Microsoft SharePoint 2010 SDK Step 9: Install PowerPivot for SharePoint and Configure Reporting Services Pop-In the SQLServer 2008 R2 installation media once again and install PowerPivot for SharePoint. This will get added as another instance named POWERPIVOT. Configure Reporting Services by following the steps mentioned here, if you need to get down to the details on how the integration between SharePoint 2010 and SQL Server 2008 R2 works, see Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010 an excellent article by Alan Le Marquand Step 10: Download and Install Sample Databases for Microsoft SQL Server 2008R2 SharePoint 2010 comes with a lot of cool stuff like PerformancePoint Services and BCS, if you need to try these out, you need to have data in your databases. So if you want to save yourself the trouble of creating sample data for your PerformancePoint and BCS experiments, download and install Sample Databases for Microsoft SQL Server 2008R2 from CodePlex. And you are done! Fire up your Visual Studio 2010 and Start Coding away!!

  Read the article

• Flashing your Windows Phone Dummies

  - by Martin Hinshelwood

  The rate at which vendors release new updates for the HD2 is ridiculously slow. You have to wait for Microsoft to release the new OS, then you wait for HTC to build it into a ROM, and then you have to wait up to 6 months for your operator to badly customise it for their network. Once Windows Phone 7 is released this problem should go away as Microsoft is likely to be able to update the phone over the air, but what do we do until then? I want Windows Mobile 6.5.5 now!   I’m an early adopter. If there is a new version of something then that’s the version I want. As long as you accept that you are using something on a “let the early adopter beware” and accept that there may be bugs, sometimes serious crippling bugs the go for it. Note that I won't be responsible if you end up bricking your phone, unlocking or flashing your radio or ROM can be risky. If you follow the instructions then you should be fine, I've flashed my phones (SPV, M300, M1000, M2000, M3100, TyTN, TyTN 2, HD2) hundreds of times without any problems! I have been using Windows Mobile 6.5.5 before it was called 6.5.5 and for long enough that I don’t even remember when I first started using it. I was using it on my HTC TyTN 2 before I got an HD2 a couple of months before Christmas, and the first custom ROM’s for the HD2 were a couple of months after that. I always update to the latest ROM that I like, and occasionally I go back to the stock ROM’s to have a look see, but I am always disappointed. Terms: Soft Reset: Same as pulling out the battery, but is like a reboot for your phone Hard Reset: Reinstalls the Operating system from the Image that is stored on it ROM: This is Image that is loaded onto your phone and it is used to reinstall your phone whenever you do a “hard reset”. Stock ROM: A ROM from the original vendor… So HTC Cook a ROM: Referring to Cooking a ROM is the process a ROM developer goes through to take all of the parts (OS, Drivers and Applications) that make up a running phone and compiling them into a ROM. ROM Kitchen: A place where you get an SDK and all the component parts of the phone: OD, Drivers and Application. There are usually lots of Tools for making it easier to compile and build the image. Flashing: The process of updating one of the layers of your phone with a new layer Bricked: This is what happens when flashing goes wrong. Your phone is now good for only one thing… stopping paper blowing away in a windy place. You can “cook” you own ROM using one of the many good “ROM Kitchens” or you can use a ROM built and tested by someone else. I have cooked my own ROM before, and while the tutorials are good, it is a lot of hassle. You can only Flash new ROM’s that are specifically for your phone only so find a ROM for your phone and XDA Developers is the best place to look. It has a forum based structure and you can find your phone quite easily. XDA Developer Forum Installing a new ROM does have its risks. In the past there have been stories about phones being “bricked” but I have not heard of a bricked phone for quite some years. if you follow the instructions carefully you should not have any problems. note: Most of the tools are written by people for whom English is not their first language to you will need concentrate hard to understand some of the instructions. Have you ever read a manual that was just literally translated from another language? Enough said… There are a number of layers on your phone that you will need to know about: SPL: This is the lowest level, like a BIOS on a PC and is the Operating Systems gateway to the hardware Radio: I think of this as the hardware drivers, and you will need a different Radio for CDMA than GSM networks ROM: This is like your Windows CD, but it is stored internally to the Phone. Flashing your phone consists of replacing one Image with another and then wiping your phone and automatically reinstall from the Image. Sometimes when you download an Image wither it is for a Radio or for ROM you only get a file called *.nbh. What do you do with this? Well you need an RUU application to push that Image to your phone. The RUU’s are different per phone, but there is a CustomRUU for the HD2 that will update your phone with any *.nbh placed in the same directory. Download and Instructions for CustomRUU #1 Flash HardSPL An SPL is kind of like a BIOS, and the default one has checks to make sure that you are only installing a signed ROM. This would prevent you from installing one that comes from any other source but the vendor. NOTE: Installing a HARD SPL invalidates your warranty so remember to Flash your phone with a “stock” vendor ROM before trying to send your phone in for repairs. Is the warranty reinstated when you go back to a stock ROM? I don’t know… Updating your SPL to a HardSPL effectively unlocks your phone so you can install anything you like. I would recommend the HardSPL2. Download and Instructions for HardSPL2 #2 Task29 One of the problems that has been seen on the HD2 when flashing new ROM’s is that things are left over from the old ROM. For a while the recommendation was to Flash a stock ROM first, but some clever cookies have come up with “Task29” which formats your phone first. After running this your phone will be blank and will only boot to the white HTC logo and no further. You should follow the instructions and reboot (remove battery) and hold down the “volume down” button while turning you HD2 on to enter the bootloader. From here you can run CustomRUU once the USB message appears. Download and Instructions for Task29 #2 Flash Radio You may need to play around with this one, there is no good and bad version and the latest is not always the best. You know that annoying thing when you hit “end call” on your phone and nothing happens? Well that's down to the Radio. Get this version right for you and you may even be able to make calls. From a Windows Mobile as well Download There are no instructions here, but they are the same as th ROM, but you use this *.nbh file. #3 Flash ROM If you have gotten this far then you are probably a pro by now Just download the latest ROM below and Flash to your phone. I have been really impressed by the Artemis line of ROM’s but it is no way the only choice. I like this one as the developer builds them as close to the stock ROM as possible while updating to the latest of everything. Download and Instructions for  Artemis HD2 vXX Conclusion While updating your ROM is not for the faint hearted it provides more options than the Stock ROM’s and quicker feature updates than waiting… Technorati Tags: WM6

  Read the article

• CodePlex Daily Summary for Friday, July 19, 2013

  CodePlex Daily Summary for Friday, July 19, 2013Popular ReleasesuComponents: uComponents v5.5.0: Following on from our 101355 release, we bring you... v5.5.0! Resolved issues The following issues have been resolved in 5.5.0: 14634 14848 DataType Grid 14840 14842 14845 UpgradingThe best way to upgrade uComponents is to re-install via Umbraco's back-office package installer, (either from the package repository or a local package upload). Do not uninstall an existing uComponents package, as this may lead to data loss! Umbraco compatibilityThis release is compatible with Umbraco 4...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Scryber PDF Generation: Scryber.Installer.v0.8.3: This one has tables! A significant update to the scryber library, with the inclusion of tables. There is no column span, or row span, and nested tables are not fully supported. But - they overflow nicely and are well styled. And they can be data bound. Other updates The Link element has inner components directly as a child, rather than in a Content element. The existing files will still continue to work, but are invalid wrt the schema. Databinding is now supported at the document level, r...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...GoAgent GUI: GoAgent GUI 1.2.0 ???: *???????，??????????????，?????????????? ????????* ????????(Beta) Beta????：https://goagent.codeplex.com/workitem/list/basic ??????：uygw@outlook.com ????：https://goagent.codeplex.com/documentation ?????????????????。Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesAscend 3D: Ascend (2013-07-17): Ascend 2.1 Animation bugfixes and speed/robustness improvements Added compatibility for multiple top-level bones on armatures Ascend Blender Exporter 2.1 Removed need to create parent-child relationship between armature and skinning mesh Added support for exporting multiple top-level bones on armatures AscendViewer 1.0.4 Updated to use latest version of Ascend libraryCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.smoketestgit1: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesthg: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesttfs: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingdatajs - JavaScript Library for data-centric web applications: datajs version 1.1.1: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes ...Orchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...New Projects[C#]A Complete MySQL Manager Project: An open-source MySQL database manager oriented to multi-threading environments, supporting to create an entire database from scratch and edit it.bCal Javascript Calendar Generator: Using this simple javascript library, you can create simple navigable calendars in your website with just one line of user code.Better Network: Tools to delete network profile and network lists in Windows 8.C# Intellisense for Notepad++: 'CS-Script Intellisense' is a real C# intellisense solution based on CS-Script and ICSharpCode.NRefactory/Mono.Cecil.DARF: Dynamic Application Runtime Framework: A set of tools and libraries which help software developers create fully distributed and component-based applications. FeiXinV5: Just TestFollower Catcher: Game made for the 2012 Windows 8 Megathon. Second place in Madrid's local competition.MeeOS .NET: El primer sistema operativo GNU GPL en español.Music Vault: Music Vault is program to store your favorite music in one place, you can in any time move all your music library by moving only one file.MVC uTorrent: This is an ASP.NET MVC uTorrent front end, that utilises the uTorrent API. The main features: - Single page application - Can be hosted in IISMyTaskManager: This project Related to distribute the task to log in users OO2RDF: OO2RDF is a framework for data triplification. P(y)rotein Subcellular Location Image Database: A library that allows communication with an OMERO database, an open-source software for storage and manipulation of biological images.PE Toolbox: PE Toolbox ? ????? ?? ???????????, ????? ??????? ??? ??????????? ?? ?????. ???? ????? ??????????? ???????: - PE IFE (Importing from Excel) PeGscan: *PeGscan*ScriptZilla: ScriptZilla is an Free Editor for Windows with more Than 23 Languages.Sharepoint : Reconciliate SSRS Reports and Datasets with datasources Powershell: Powershell to link datasources to SSRS reports and datasetsSync-Moped: The idea behind the "Sync-Moped" is to synchronize two directories with backup functionality.System.Time: System.Time provides a type for .NET that allows the managing of a time in System.String, System.DateTime and System.TimeSpan form at the same time.Text Analytics: Project summary will be added later.Tibia Universal MC .NET: This tool was written as an attempt to port the [url:http://code.google.com/p/xenomc/] to the .NET Framework.VRFramework: VR Framework is a system for creating a virtual reality games using your PC, and Android smart phone, and Unity 3D.

  Read the article

• PASS Summit Feedback

  - by Rob Farley

  PASS Feedback came in last week. I also saw my dentist for some fillings... At the PASS Summit this year, I delivered a couple of regular sessions and a Lightning Talk. People told me they enjoyed it, but when the rankings came out, they showed that I didn’t score particularly well. Brent Ozar was keen to discuss it with me. Brent: PASS speaker feedback is out. You did two sessions and a Lightning Talk. How did you go? Rob: Not so well actually, thanks for asking. Brent: Ha! Sorry. Of course you know that's why I wanted to discuss this with you. I was in one of your sessions at SQLBits in the UK a month before PASS, and I thought you rocked. You've got a really good and distinctive delivery style.  Then I noticed your talks were ranked in the bottom quarter of the Summit ratings and wanted to discuss it. Rob: Yeah, I know. You did ask me if we could do this...  I should explain – my presentation style is not the stereotypical IT conference one. I throw in jokes, and try to engage the audience thoroughly. I find many talks amazingly dry, and I guess I try to buck that trend. I also run training courses, and find that I get a lot of feedback from people thanking me for keeping things interesting. That said, I also get feedback criticising me for my style, and that’s basically what’s happened here. For the rest of this discussion, let’s focus on my talk about the Incredible Shrinking Execution Plan, which I considered to be my main talk. Brent: I thought that session title was the very best one at the entire Summit, and I had it on my recommended sessions list.  In four words, you managed to sum up the topic and your sense of humor.  I read that and immediately thought, "People need to be in this session," and then it didn't score well.  Tell me about your scores. Rob: The questions on the feedback form covered the usefulness of the information, the speaker’s presentation skills, their knowledge of the subject, how well the session was described, the amount of time allocated, and the quality of the presentation materials. Brent: Presentation materials? But you don’t do slides.  Did they rate your thong? Rob: No-one saw my flip-flops in this talk, Brent. I created a script in Management Studio, and published that afterwards, but I think people will have scored that question based on the lack of slides. I wasn’t expecting to do particularly well on that one. That was the only section that didn’t have 5/5 as the most popular score. Brent: See, that sucks, because cookbook-style scripts are often some of my favorites.  Adam Machanic's Service Broker workbench series helped me immensely when I was prepping for the MCM.  As an attendee, I'd rather have a commented script than a slide deck.  So how did you rank so low? Rob: When I look at the scores that you got (based on your blog post), you got very few scores below 3 – people that felt strong enough about your talk to post a negative score. In my scores, between 5% and 10% were below 3 (except on the question about whether I knew my stuff – I guess I came as knowledgeable). Brent: Wow – so quite a few people really didn’t like your talk then? Rob: Yeah. Mind you, based on the comments, some people really loved it. I’d like to think that there would be a certain portion of the room who may have rated the talk as one of the best of the conference. Some of my comments included “amazing!”, “Best presentation so far!”, “Wow, best session yet”, “fantastic” and “Outstanding!”. I think lots of talks can be “Great”, but not so many talks can be “Outstanding” without the word losing its meaning. One wrote “Pretty amazing presentation, considering it was completely extemporaneous.” Brent: Extemporaneous, eh? Rob: Yeah. I guess they don’t realise how much preparation goes into coming across as unprepared. In many ways it’s much easier to give a written speech than to deliver a presentation without slides as a prompt. Brent: That delivery style, the really relaxed, casual, college-professor approach was one of the things I really liked about your presentation at SQLbits.  As somebody who presents a lot, I "get" it - I know how hard it is to come off as relaxed and comfortable with your own material.  It's like improv done by jazz players and comedians - if you've never tried it, you don't realize how hard it is.  People also don't realize how hard it is to make a tough subject fun. Rob: Yeah well... There will be people writing comments on this post that say I wasn't trying to make the subject fun, and that I was making it all about me. Sometimes the style works, sometimes it doesn't. Most of the comments mentioned the fact that I tell jokes, some in a nice way, but some not so much (and it wasn't just a PASS thing - that's the mix of feedback I generally get). One comment at PASS was: “great stand up comedian - not what I'm looking for at pass”, and there were certainly a few that said “too many jokes”. I’m not trying to do stand-up – jokes are my way of engaging with the audience while I demonstrate some of the amazing things that the Query Optimizer can do if you write your queries the right way. Some people didn’t think it was technical enough, but I’ve also had some people tell me that the concepts I’m explaining are deep and profound. Brent: To me, that's a hallmark of a great explanation - when someone says, "But of course it has to work that way - how could it work any other way?  It seems so simple and logical."  Well, sure it does when it's explained correctly, but now pick up any number of thick SQL Server books and try to understand the Redundant Joins concept.  I guarantee it'll take more than 45 minutes. Rob: Some people in my audiences realise that, but definitely not everyone. There's only so much you can tell someone that something is profound. Generally it's something that they either have an epiphany on or not. I like to lull my audience into knowing what's going on, and do something that surprises them. Gain their trust, build a rapport, and then show them the deeper truth of what just happened. Brent: So you've learned your lesson about presentation scores, right?  From here on out, you're going to be dry, humorless, and all your presentations will consist of you reading bullet points off the screen. Rob: No Brent, I’m not. I'm also not going to suggest that most presentations at PASS are like that. No-one tries to present like that. There's a big space to occupy between what "dry and humourless" and me. My difference is to focus on the relationship I have with the crowd, rather than focussing on delivering the perfect session. I want to see people smiling and know they're relaxed. I think most presenters focus on the material, which is completely reasonable and safe. I remember once hearing someone talking about product creation. They talked about mediocrity. They said that one of the worst things that people can ever say about your product is that it’s “good”. What you want is for 10% of the world to love it enough to want to buy it. If 10% the world gave me a dollar, I’d have more money than I could ever use (assuming it wasn’t the SAME dollar they were giving me I guess). Brent: It's the Raving Fans theory.  It's better to have a small number of raving customers than a large number of almost-but-not-really customers who don't care that much about your product or service.  I know exactly how you feel - when I got survey feedback from my Quest video presentation when I was dressed up in a Richard Simmons costume, some of the attendees said I was unprofessional and distracting.  Some of the attendees couldn't get enough and Photoshopped all kinds of stuff into the screen captures.  On a whole, I probably didn't score that well, and I'm fine with that.  It sucks to look at the scores though - do those lower scores bother you? Rob: Of course they do. It hurts deeply. I open myself up and give presentations in a very personal way. All presenters do that, and we all feel the pain of negative feedback. I hate coming 146th & 162nd out of 185, but have to acknowledge that many sessions did worse still. Plus, once I feel the wounds have healed, I’ll be able to remember that there are people in the world that rave about my presentation style, and figure that people will hopefully talk about me. One day maybe those people that don’t like my presentation style will stay away and I might be able to score better. You don’t pay to hear country music if you prefer western... Lots of people find chili too spicy, but it’s still a popular food. Brent: But don’t you want to appeal to everyone? Rob: I do, but I don’t want to be lukewarm as in Revelation 3:16. I’d rather disgust and be discussed. Well, maybe not ‘disgust’, but I don’t want to conform. Conformity just isn’t the same any more. I’m not sure I’ve ever been one to do that. I try not to offend, but definitely like to be different. Brent: Count me among your raving fans, sir.  Where can we see you next? Rob: Considering I live in Adelaide in Australia, I’m not about to appear at anyone’s local SQL Saturday. I’m still trying to plan which events I’ll get to in 2011. I’ve submitted abstracts for TechEd North America, but won’t hold my breath. I’m also considering the SQLBits conferences in the UK in April, PASS in October, and I’m sure I’ll do some LiveMeeting presentations for user groups. Online, people download some of my recent SQLBits presentations at http://bit.ly/RFSarg and http://bit.ly/Simplification though. And they can download a 5-minute MP3 of my Lightning Talk at http://www.lobsterpot.com.au/files/Collation.mp3, in which I try to explain the idea behind collation, using thongs as an example. Brent: I was in the audience for http://bit.ly/RFSarg. That was a great presentation. Rob: Thanks, Brent. Now where’s my dollar?

  Read the article

• SQL SERVER – Introduction to SQL Server 2014 In-Memory OLTP

  - by Pinal Dave

  In SQL Server 2014 Microsoft has introduced a new database engine component called In-Memory OLTP aka project “Hekaton” which is fully integrated into the SQL Server Database Engine. It is optimized for OLTP workloads accessing memory resident data. In-memory OLTP helps us create memory optimized tables which in turn offer significant performance improvement for our typical OLTP workload. The main objective of memory optimized table is to ensure that highly transactional tables could live in memory and remain in memory forever without even losing out a single record. The most significant part is that it still supports majority of our Transact-SQL statement. Transact-SQL stored procedures can be compiled to machine code for further performance improvements on memory-optimized tables. This engine is designed to ensure higher concurrency and minimal blocking. In-Memory OLTP alleviates the issue of locking, using a new type of multi-version optimistic concurrency control. It also substantially reduces waiting for log writes by generating far less log data and needing fewer log writes. Points to remember Memory-optimized tables refer to tables using the new data structures and key words added as part of In-Memory OLTP. Disk-based tables refer to your normal tables which we used to create in SQL Server since its inception. These tables use a fixed size 8 KB pages that need to be read from and written to disk as a unit. Natively compiled stored procedures refer to an object Type which is new and is supported by in-memory OLTP engine which convert it into machine code, which can further improve the data access performance for memory –optimized tables. Natively compiled stored procedures can only reference memory-optimized tables, they can’t be used to reference any disk –based table. Interpreted Transact-SQL stored procedures, which is what SQL Server has always used. Cross-container transactions refer to transactions that reference both memory-optimized tables and disk-based tables. Interop refers to interpreted Transact-SQL that references memory-optimized tables. Using In-Memory OLTP In-Memory OLTP engine has been available as part of SQL Server 2014 since June 2013 CTPs. Installation of In-Memory OLTP is part of the SQL Server setup application. The In-Memory OLTP components can only be installed with a 64-bit edition of SQL Server 2014 hence they are not available with 32-bit editions. Creating Databases Any database that will store memory-optimized tables must have a MEMORY_OPTIMIZED_DATA filegroup. This filegroup is specifically designed to store the checkpoint files needed by SQL Server to recover the memory-optimized tables, and although the syntax for creating the filegroup is almost the same as for creating a regular filestream filegroup, it must also specify the option CONTAINS MEMORY_OPTIMIZED_DATA. Here is an example of a CREATE DATABASE statement for a database that can support memory-optimized tables: CREATE DATABASE InMemoryDB ON PRIMARY(NAME = [InMemoryDB_data], FILENAME = 'D:\data\InMemoryDB_data.mdf', size=500MB), FILEGROUP [SampleDB_mod_fg] CONTAINS MEMORY_OPTIMIZED_DATA (NAME = [InMemoryDB_mod_dir], FILENAME = 'S:\data\InMemoryDB_mod_dir'), (NAME = [InMemoryDB_mod_dir], FILENAME = 'R:\data\InMemoryDB_mod_dir') LOG ON (name = [SampleDB_log], Filename='L:\log\InMemoryDB_log.ldf', size=500MB) COLLATE Latin1_General_100_BIN2; Above example code creates files on three different drives (D:  S: and R:) for the data files and in memory storage so if you would like to run this code kindly change the drive and folder locations as per your convenience. Also notice that binary collation was specified as Windows (non-SQL). BIN2 collation is the only collation support at this point for any indexes on memory optimized tables. It is also possible to add a MEMORY_OPTIMIZED_DATA file group to an existing database, use the below command to achieve the same. ALTER DATABASE AdventureWorks2012 ADD FILEGROUP hekaton_mod CONTAINS MEMORY_OPTIMIZED_DATA; GO ALTER DATABASE AdventureWorks2012 ADD FILE (NAME='hekaton_mod', FILENAME='S:\data\hekaton_mod') TO FILEGROUP hekaton_mod; GO Creating Tables There is no major syntactical difference between creating a disk based table or a memory –optimized table but yes there are a few restrictions and a few new essential extensions. Essentially any memory-optimized table should use the MEMORY_OPTIMIZED = ON clause as shown in the Create Table query example. DURABILITY clause (SCHEMA_AND_DATA or SCHEMA_ONLY) Memory-optimized table should always be defined with a DURABILITY value which can be either SCHEMA_AND_DATA or  SCHEMA_ONLY the former being the default. A memory-optimized table defined with DURABILITY=SCHEMA_ONLY will not persist the data to disk which means the data durability is compromised whereas DURABILITY= SCHEMA_AND_DATA ensures that data is also persisted along with the schema. Indexing Memory Optimized Table A memory-optimized table must always have an index for all tables created with DURABILITY= SCHEMA_AND_DATA and this can be achieved by declaring a PRIMARY KEY Constraint at the time of creating a table. The following example shows a PRIMARY KEY index created as a HASH index, for which a bucket count must also be specified. CREATE TABLE Mem_Table ( [Name] VARCHAR(32) NOT NULL PRIMARY KEY NONCLUSTERED HASH WITH (BUCKET_COUNT = 100000), [City] VARCHAR(32) NULL, [State_Province] VARCHAR(32) NULL, [LastModified] DATETIME NOT NULL, ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA); Now as you can see in the above query example we have used the clause MEMORY_OPTIMIZED = ON to make sure that it is considered as a memory optimized table and not just a normal table and also used the DURABILITY Clause= SCHEMA_AND_DATA which means it will persist data along with metadata and also you can notice this table has a PRIMARY KEY mentioned upfront which is also a mandatory clause for memory-optimized tables. We will talk more about HASH Indexes and BUCKET_COUNT in later articles on this topic which will be focusing more on Row and Index storage on Memory-Optimized tables. So stay tuned for that as well. Now as we covered the basics of Memory Optimized tables and understood the key things to remember while using memory optimized tables, let’s explore more using examples to understand the Performance gains using memory-optimized tables. I will be using the database which i created earlier in this article i.e. InMemoryDB in the below Demo Exercise. USE InMemoryDB GO -- Creating a disk based table CREATE TABLE dbo.Disktable ( Id INT IDENTITY, Name CHAR(40) ) GO CREATE NONCLUSTERED INDEX IX_ID ON dbo.Disktable (Id) GO -- Creating a memory optimized table with similar structure and DURABILITY = SCHEMA_AND_DATA CREATE TABLE dbo.Memorytable_durable ( Id INT NOT NULL PRIMARY KEY NONCLUSTERED Hash WITH (bucket_count =1000000), Name CHAR(40) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO -- Creating an another memory optimized table with similar structure but DURABILITY = SCHEMA_Only CREATE TABLE dbo.Memorytable_nondurable ( Id INT NOT NULL PRIMARY KEY NONCLUSTERED Hash WITH (bucket_count =1000000), Name CHAR(40) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_only) GO -- Now insert 100000 records in dbo.Disktable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Disktable(Name) VALUES('sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END -- Do the same inserts for Memory table dbo.Memorytable_durable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Memorytable_durable VALUES(@i_t, 'sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END -- Now finally do the same inserts for Memory table dbo.Memorytable_nondurable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Memorytable_nondurable VALUES(@i_t, 'sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END The above 3 Inserts took 1.20 minutes, 54 secs, and 2 secs respectively to insert 100000 records on my machine with 8 Gb RAM. This proves the point that memory-optimized tables can definitely help businesses achieve better performance for their highly transactional business table and memory- optimized tables with Durability SCHEMA_ONLY is even faster as it does not bother persisting its data to disk which makes it supremely fast. Koenig Solutions is one of the few organizations which offer IT training on SQL Server 2014 and all its updates. Now, I leave the decision on using memory_Optimized tables on you, I hope you like this article and it helped you understand  the fundamentals of IN-Memory OLTP . Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Koenig

  Read the article

• Your Day-by-Day Guide to Agile PLM at Oracle OpenWorld 2012

  - by Kerrie Foy

  This year’s Oracle OpenWorld conference is nearly here, and we’re all excited about what we have planned! With five days of activities and customer presenters from market leaders and top innovators like The Coca-Cola Company, Starbucks, JDSU, Facebook, GlobalFoundries, and more, this is an event you don't want to miss. I've compiled this day-by-day guide to help anyone keep track of all the “Product Lifecycle Management and Product Value Chain” sessions and activities at OpenWorld 2012, September 30 – October 4 in San Francisco, California.  Monday, October 1 There are great networking activities on Sunday September 30, but PLM specific sessions start after general conference keynotes on Monday, October 1 at 10:45 a.m. at the InterContinental Hotel in room Telegraph Hill. In fact, most of our sessions this year will be held in this room, which is still close to the conference keynotes in Moscone, but just far enough away to allow some focused networking and discussions.   This first session, 10:45 – 11:45 a.m. is a joint session with the Agile and AutoVue teams, entitled “Streamline PLM Design-to-Manufacturing Processes with AutoVue Visualization Soltuions” featuring presenters from Oracle as well as joint AutoVue and Agile PLM customer GlobalFoundries. In the following 12:15 – 1:15 p.m. slot, there are two sessions to choose from, so if you have a team of representatives attending OpenWorld, you may consider splitting up to catch both of these: a) Our General Session will be held in the InterContinental Hotel Ballroom C, which will cover our complete enterprise PLM strategy, product updates, and roadmaps. It’s our pleasure to feature a customer keynote presentation from Chris Bedi, CIO, and Rajeev Sethi, Director IT Business Engagement, of JDSU. b) A focused session on integrating PLM with Engineering and Supply Chain Systems will be held on the second floor of Moscone West (next to the InterContinental) in room 2022. Join to discover how these types of integrations help companies manage common and integrated design information across all MCAD, ECAD, and software components. After a lunch break and perhaps a visit to the Demogrounds in Moscone West, select from two product roadmap sessions in the next time slot (3:15 – 4:15 p.m.): an Agile 9.3.x session located in the InterContinental’s Ballroom C, and an Agile PLM for Process session located back in the InterContinental’s Telegraph Room. Both sessions will have strong content around each product line’s latest releases, vision, and customer examples. We are very pleased to feature Daniel Soosai of Facebook in the A9 session and Vinnie D’Agostino of The Coca-Cola Company in the PLM for Process session. Afterwards, hang in there for one last session of the day from 4:45 – 5:45 p.m.; it’s an insightful discussion on leveraging Agile PLM as the Foundation for Enterprise Quality Management, and it’s sure to be one of the best. In the Telegraph Room, this session will feature Oracle experts, partner co-presenter David Bartlett from CPG Solutions, and customer co-presenter Thomas Crowe, CIO of PL Developments. Hear their experience around implementing collaborative, integrated solutions to ensure effective knowledge transfer throughout an organization, and how to perform analysis in real time to resolve product quality issues swiftly and efficiently. On Monday evening there will be plenty of industry, product, and partner dinners, so take advantage of all the networking opportunities and catch some great tunes at the 5 day Oracle OpenWorld Music Festival! Tuesday, October 2 Tuesday starts early with a special PLM Networking Brunch, sponsored by several partners, from 8:30 a.m. – 10:30 a.m. at the B Restaurant that sits atop Yerba Buena Gardens. You’ll have the unique opportunity to meet with like-minded industry peers and a PLM partner to discuss a topic of your choosing while enjoying a delicious meal. Registration is required, so to inquire about attending this brunch, please email Terri.Hiskey-AT-oracle.com. After wrapping up your conversations over brunch, head over to the Marriott Marquis in the Nob Hill CD room for a chance to experience the Oracle Product Lifecycle Analytics solution in a Hands-On Lab, open from 10:15 a.m. – 12:45 p.m. Experts will be there to answer your questions. Back in the InterContinental Hotel’s Telegraph room, the session on “Ideation and Requirements Management: Capturing the Voice of the Customer” begins at 11:45 a.m. – 12:45 p.m. This may be the session for you if you’re struggling with challenges like too many repositories of customer needs, requests, and ideas; limited visibility into which ideas are being advanced by customers and field resources; or if you’re unable to leverage internal expertise to expose effort and potential risks. This session will discuss how Agile PLM can help you overcome ideation challenges to deliver the right products to their targeted markets and fulfill customer desires. Next, from 1:15 – 2:15 p.m. join us for a session on Managing Profitable Innovation with Oracle Product Lifecycle Analytics. If you missed the Hands-on Lab, have more questions, or simply want to be inspired by the product’s forward-thinking vision and capabilities, this is a great opportunity to meet the progressive-minded executives behind the application. After this session, it may be a good opportunity to swing by the Demogrounds in Moscone West and visit the Agile PLM demos at exhibit booths #81 for Agile PLM for Discrete Manufacturing, #70 for Agile PLM for Process, and #82 for AutoVue and Agile PLM Enterprise Visualization. Check out the related Supply Chain Management booths close by if you’re interested - here's the map. There’s always lots to see and do around the exhibit area. But don’t forget the last session of the day from 5:00 p.m. – 6:00 p.m. in Telegraph Hill on Managing Product Innovation and Compliance in Life Science Companies, a “must-see” if you’re in this industry. Launching innovative products quickly is already a high-stakes challenge, but companies in the life sciences industry face uniquely severe consequences when new products don’t perform or comply as required. In recent years, more and more regulations have become mandatory, and new ones, such as REACH, are currently going into effect for several companies. Customer presenters from pharmaceutical leader Eli Lilly will share how they’ve leveraged Agile PLM to deliver high-quality, innovative products in a fast-paced, heavily regulated market environment. Tuesday evening unwind at the Supply Chain Management Reception from 6:00 – 8:00 p.m. at the premier boutique Roe Nightclub and Lounge, which is located about three blocks down on Howard Street (on the other side of Moscone from the InterContinental Hotel). Registration is required. Click here for the details.   Wednesday, October 3 We have another full line-up on Wednesday, so be ready for an action-packed day. We start with a session at 10:15 – 11:15 a.m. in the Telegraph Room where we have a session on “PLM for Consumer Products: Building an Engine for Quality and Innovation” with featured presenters from Starbucks and partner Kalypso. This is a rare opportunity to learn directly from Starbucks how they instill quality and innovation throughout their organization, products, and processes, leveraging PLM disciplines with strong support from their partner.  If you’re not in the consumer products industry, we recommend attending another session at 10:15 – 11:15 a.m. in Moscone West room 3005: “Eco-Enterprise Innovation Awards and the Business Case for Sustainability” featuring Jeff Henley, Oracle’s Chairman of the Board and Jon Chorley, Chief Sustainability Officer. Oracle will honor select customers with Oracle’s Eco-Enterprise Innovation award, which recognizes customers and their respective partners who rely on Oracle products to support their green business practices to reduce their environmental impact while improving business efficiencies and reducing costs. The awards presentation is followed by a panel discussion with customers and Oracle executives, who describe how these award-winning organizations are embracing environmental initiatives as a central part of their business strategy and how information technology plays a pivotal role. Next at 11:45 a.m. – 12:45 p.m. in Telegraph Hill attend our session devoted to exploring Product Lifecycle Management’s role in Software Lifecycle Management. This is a thought leadership session with Oracle experts in the field on the importance of change management, and we’ll discuss how Oracle has for years leveraged Agile PLM to develop Agile PLM. If software lifecycle management doesn’t apply to your business or you’d rather engage in some lively one-on-one discussions, we also have a “Supply Chain Meet the Experts” session in Moscone West Room 2001A. Product experts, thought leaders and executives will be on hand to discuss your questions/topics, so come prepared. This session tends to fill up fast so try to get in early. At 1:15 – 2:15 p.m. join us back in Telegraph Hill for a session focused on leveraging the Agile Product Portfolio Management application as the Product Development Master Schedule to improve efficiencies, optimize resources, and gain visibility across projects enterprise-wide to improve portfolio profitability. Customer presenters from Broadcom will explain how they’ve leveraged the product to enable a master schedule with enterprise-level, phase-gate program and project collaboration and resource optimization. Again in Telegraph Hill from 3:30 – 4:30 p.m. we have an interesting session with leading semiconductor customer LSI and partner Kalypso on how LSI leveraged Agile PLM to advance from homegrown applications to complete Product Value Chain Management. That type of transition can be challenging, and LSI details how they were able to achieve their goals and the value they gained along the journey – a fascinating account for any company interested in leveraging best practices to innovate their business processes and even end products. Lastly, we’ll wrap up in Telegraph Hill from 5:00 – 6:00 p.m. with a session on “Ensuring New Product Success by Achieving Excellence in New Product Introduction.” This is a cross-industry session, guaranteed to deliver insight in the often elusive practice of creating winning products, and we’re very excited about. According to IDC Manufacturing Insights analyst Joe Barkai, “Product Failures are not necessarily a result of bad ideas…they are a result of suboptimal decisions.” We’ll show you how to wire your business processes to enhance decision-making and maximize product potential. Now, quickly hit your hotel room to freshen up and then catch one of the many complimentary shuttles to the much-anticipated Oracle Customer Appreciation Event on Treasure Island. We have a very exciting show planned – check out what’s in store here. Thursday, October 4 PLM has a light schedule on Thursday this year with just one session, but this again is one of our best sessions on managing the Product Value Chain: at 11:15 a.m – 12:15 p.m.in Telegraph Hill, it’s a customer and partner driven session with Sonoco Products and Deloitte telling their story about how to achieve integrated change control by interfacing Agile PLM with Oracle E-Business Suite. Sonoco Products, a global manufacturer of consumer and industrial packaging materials, with its systems integrator, Deloitte, is doing this by implementing prebuilt integration (Oracle Design-to-Release Integration Pack for Agile Product Lifecycle Management for Process and Oracle Process) to integrate Agile with Oracle Product Hub/Oracle Product Information Management and Oracle E-Business Suite. This session presents a case study of how Sonoco is leveraging this solution to improve data quality and build a framework for stronger master data governance. Even though that ends our PLM line-up at OpenWorld, there will still be many sessions and activities at the conference, so visit the Oracle OpenWorld website to review agendas and build your schedule. And of course, download and bring this guide and the latest version of the Agile PLM Focus-On Document (available soon!). San Francisco is a wonderful city to explore, and we’re glad you’re considering joining the Agile PLM team at Oracle OpenWorld!  I hope to see you there! Follow me before the conference and on site for real-time updates about #OOW12 on Twitter @Kerrie_Foy or @AgilePLM.

  Read the article

• Code excavations, wishful invocations, perimeters and domain specific unit test frameworks

  - by RoyOsherove

  One of the talks I did at QCON London was about a subject that I’ve come across fairly recently , when I was building SilverUnit – a “pure” unit test framework for silverlight objects that depend on the silverlight runtime to run. It is the concept of “cogs in the machine” – when your piece of code needs to run inside a host framework or runtime that you have little or no control over for testability related matters. Examples of such cogs and machines can be: your custom control running inside silverlight runtime in the browser your plug-in running inside an IDE your activity running inside a windows workflow your code running inside a java EE bean your code inheriting from a COM+ (enterprise services) component etc.. Not all of these are necessarily testability problems. The main testability problem usually comes when your code actually inherits form something inside the system. For example. one of the biggest problems with testing objects like silverlight controls is the way they depend on the silverlight runtime – they don’t implement some silverlight interface, they don’t just call external static methods against the framework runtime that surrounds them – they actually inherit parts of the framework: they all inherit (in this case) from the silverlight DependencyObject Wrapping it up? An inheritance dependency is uniquely challenging to bring under test, because “classic” methods such as wrapping the object under test with a framework wrapper will not work, and the only way to do manually is to create parallel testable objects that get delegated with all the possible actions from the dependencies.    In silverlight’s case, that would mean creating your own custom logic class that would be called directly from controls that inherit from silverlight, and would be tested independently of these controls. The pro side is that you get the benefit of understanding the “contract” and the “roles” your system plays against your logic, but unfortunately, more often than not, it can be very tedious to create, and may sometimes feel unnecessary or like code duplication. About perimeters A perimeter is that invisible line that your draw around your pieces of logic during a test, that separate the code under test from any dependencies that it uses. Most of the time, a test perimeter around an object will be the list of seams (dependencies that can be replaced such as interfaces, virtual methods etc.) that are actually replaced for that test or for all the tests. Role based perimeters In the case of creating a wrapper around an object – one really creates a “role based” perimeter around the logic that is being tested – that wrapper takes on roles that are required by the code under test, and also communicates with the host system to implement those roles and provide any inputs to the logic under test. in the image below – we have the code we want to test represented as a star. No perimeter is drawn yet (we haven’t wrapped it up in anything yet). in the image below is what happens when you wrap your logic with a role based wrapper – you get a role based perimeter anywhere your code interacts with the system: There’s another way to bring that code under test – using isolation frameworks like typemock, rhino mocks and MOQ (but if your code inherits from the system, Typemock might be the only way to isolate the code from the system interaction.   Ad-Hoc Isolation perimeters the image below shows what I call ad-hoc perimeter that might be vastly different between different tests: This perimeter’s surface is much smaller, because for that specific test, that is all the “change” that is required to the host system behavior.   The third way of isolating the code from the host system is the main “meat” of this post: Subterranean perimeters Subterranean perimeters are Deep rooted perimeters  - “always on” seams that that can lie very deep in the heart of the host system where they are fully invisible even to the test itself, not just to the code under test. Because they lie deep inside a system you can’t control, the only way I’ve found to control them is with runtime (not compile time) interception of method calls on the system. One way to get such abilities is by using Aspect oriented frameworks – for example, in SilverUnit, I’ve used the CThru AOP framework based on Typemock hooks and CLR profilers to intercept such system level method calls and effectively turn them into seams that lie deep down at the heart of the silverlight runtime. the image below depicts an example of what such a perimeter could look like: As you can see, the actual seams can be very far away form the actual code under test, and as you’ll discover, that’s actually a very good thing. Here is only a partial list of examples of such deep rooted seams : disabling the constructor of a base class five levels below the code under test (this.base.base.base.base) faking static methods of a type that’s being called several levels down the stack: method x() calls y() calls z() calls SomeType.StaticMethod()  Replacing an async mechanism with a synchronous one (replacing all timers with your own timer behavior that always Ticks immediately upon calls to “start()” on the same caller thread for example) Replacing event mechanisms with your own event mechanism (to allow “firing” system events) Changing the way the system saves information with your own saving behavior (in silverunit, I replaced all Dependency Property set and get with calls to an in memory value store instead of using the one built into silverlight which threw exceptions without a browser) several questions could jump in: How do you know what to fake? (how do you discover the perimeter?) How do you fake it? Wouldn’t this be problematic  - to fake something you don’t own? it might change in the future How do you discover the perimeter to fake? To discover a perimeter all you have to do is start with a wishful invocation. a wishful invocation is the act of trying to invoke a method (or even just create an instance ) of an object using “regular” test code. You invoke the thing that you’d like to do in a real unit test, to see what happens: Can I even create an instance of this object without getting an exception? Can I invoke this method on that instance without getting an exception? Can I verify that some call into the system happened? You make the invocation, get an exception (because there is a dependency) and look at the stack trace. choose a location in the stack trace and disable it. Then try the invocation again. if you don’t get an exception the perimeter is good for that invocation, so you can move to trying out other methods on that object. in a future post I will show the process using CThru, and how you end up with something close to a domain specific test framework after you’re done creating the perimeter you need.

  Read the article

• exporting bind and keyframe bone poses from blender to use in OpenGL

  - by SaldaVonSchwartz

  I'm having a hard time trying to understand how exactly Blender's concept of bone transforms maps to the usual math of skinning (which I'm implementing in an OpenGL-based engine of sorts). Or I'm missing out something in the math.. It's gonna be long, but here's as much background as I can think of. First, a few notes and assumptions: I'm using column-major order and multiply from right to left. So for instance, vertex v transformed by matrix A and then further transformed by matrix B would be: v' = BAv. This also means whenever I export a matrix from blender through python, I export it (in text format) in 4 lines, each representing a column. This is so I can then I can read them back into my engine like this: if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[0], &skeleton.joints[currentJointIndex].inverseBindTransform.m[1], &skeleton.joints[currentJointIndex].inverseBindTransform.m[2], &skeleton.joints[currentJointIndex].inverseBindTransform.m[3])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[4], &skeleton.joints[currentJointIndex].inverseBindTransform.m[5], &skeleton.joints[currentJointIndex].inverseBindTransform.m[6], &skeleton.joints[currentJointIndex].inverseBindTransform.m[7])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[8], &skeleton.joints[currentJointIndex].inverseBindTransform.m[9], &skeleton.joints[currentJointIndex].inverseBindTransform.m[10], &skeleton.joints[currentJointIndex].inverseBindTransform.m[11])) { if (fscanf(fileHandle, "%f %f %f %f", &skeleton.joints[currentJointIndex].inverseBindTransform.m[12], &skeleton.joints[currentJointIndex].inverseBindTransform.m[13], &skeleton.joints[currentJointIndex].inverseBindTransform.m[14], &skeleton.joints[currentJointIndex].inverseBindTransform.m[15])) { I'm simplifying the code I show because otherwise it would make things unnecessarily harder (in the context of my question) to explain / follow. Please refrain from making remarks related to optimizations. This is not final code. Having said that, if I understand correctly, the basic idea of skinning/animation is: I have a a mesh made up of vertices I have the mesh model-world transform W I have my joints, which are really just transforms from each joint's space to its parent's space. I'll call these transforms Bj meaning matrix which takes from joint j's bind pose to joint j-1's bind pose. For each of these, I actually import their inverse to the engine, Bj^-1. I have keyframes each containing a set of current poses Cj for each joint J. These are initially imported to my engine in TQS format but after (S)LERPING them I compose them into Cj matrices which are equivalent to the Bjs (not the Bj^-1 ones) only that for the current spacial configurations of each joint at that frame. Given the above, the "skeletal animation algorithm is" On each frame: check how much time has elpased and compute the resulting current time in the animation, from 0 meaning frame 0 to 1, meaning the end of the animation. (Oh and I'm looping forever so the time is mod(total duration)) for each joint: 1 -calculate its world inverse bind pose, that is Bj_w^-1 = Bj^-1 Bj-1^-1 ... B0^-1 2 -use the current animation time to LERP the componets of the TQS and come up with an interpolated current pose matrix Cj which should transform from the joints current configuration space to world space. Similar to what I did to get the world version of the inverse bind poses, I come up with the joint's world current pose, Cj_w = C0 C1 ... Cj 3 -now that I have world versions of Bj and Cj, I store this joint's world- skinning matrix K_wj = Cj_w Bj_w^-1. The above is roughly implemented like so: - (void)update:(NSTimeInterval)elapsedTime { static double time = 0; time = fmod((time + elapsedTime),1.); uint16_t LERPKeyframeNumber = 60 * time; uint16_t lkeyframeNumber = 0; uint16_t lkeyframeIndex = 0; uint16_t rkeyframeNumber = 0; uint16_t rkeyframeIndex = 0; for (int i = 0; i < aClip.keyframesCount; i++) { uint16_t keyframeNumber = aClip.keyframes[i].number; if (keyframeNumber <= LERPKeyframeNumber) { lkeyframeIndex = i; lkeyframeNumber = keyframeNumber; } else { rkeyframeIndex = i; rkeyframeNumber = keyframeNumber; break; } } double lTime = lkeyframeNumber / 60.; double rTime = rkeyframeNumber / 60.; double blendFactor = (time - lTime) / (rTime - lTime); GLKMatrix4 bindPosePalette[aSkeleton.jointsCount]; GLKMatrix4 currentPosePalette[aSkeleton.jointsCount]; for (int i = 0; i < aSkeleton.jointsCount; i++) { F3DETQSType& lPose = aClip.keyframes[lkeyframeIndex].skeletonPose.jointPoses[i]; F3DETQSType& rPose = aClip.keyframes[rkeyframeIndex].skeletonPose.jointPoses[i]; GLKVector3 LERPTranslation = GLKVector3Lerp(lPose.t, rPose.t, blendFactor); GLKQuaternion SLERPRotation = GLKQuaternionSlerp(lPose.q, rPose.q, blendFactor); GLKVector3 LERPScaling = GLKVector3Lerp(lPose.s, rPose.s, blendFactor); GLKMatrix4 currentTransform = GLKMatrix4MakeWithQuaternion(SLERPRotation); currentTransform = GLKMatrix4Multiply(currentTransform, GLKMatrix4MakeTranslation(LERPTranslation.x, LERPTranslation.y, LERPTranslation.z)); currentTransform = GLKMatrix4Multiply(currentTransform, GLKMatrix4MakeScale(LERPScaling.x, LERPScaling.y, LERPScaling.z)); if (aSkeleton.joints[i].parentIndex == -1) { bindPosePalette[i] = aSkeleton.joints[i].inverseBindTransform; currentPosePalette[i] = currentTransform; } else { bindPosePalette[i] = GLKMatrix4Multiply(aSkeleton.joints[i].inverseBindTransform, bindPosePalette[aSkeleton.joints[i].parentIndex]); currentPosePalette[i] = GLKMatrix4Multiply(currentPosePalette[aSkeleton.joints[i].parentIndex], currentTransform); } aSkeleton.skinningPalette[i] = GLKMatrix4Multiply(currentPosePalette[i], bindPosePalette[i]); } } At this point, I should have my skinning palette. So on each frame in my vertex shader, I do: uniform mat4 modelMatrix; uniform mat4 projectionMatrix; uniform mat3 normalMatrix; uniform mat4 skinningPalette[6]; attribute vec4 position; attribute vec3 normal; attribute vec2 tCoordinates; attribute vec4 jointsWeights; attribute vec4 jointsIndices; varying highp vec2 tCoordinatesVarying; varying highp float lIntensity; void main() { vec3 eyeNormal = normalize(normalMatrix * normal); vec3 lightPosition = vec3(0., 0., 2.); lIntensity = max(0.0, dot(eyeNormal, normalize(lightPosition))); tCoordinatesVarying = tCoordinates; vec4 skinnedVertexPosition = vec4(0.); for (int i = 0; i < 4; i++) { skinnedVertexPosition += jointsWeights[i] * skinningPalette[int(jointsIndices[i])] * position; } gl_Position = projectionMatrix * modelMatrix * skinnedVertexPosition; } The result: The mesh parts that are supposed to animate do animate and follow the expected motion, however, the rotations are messed up in terms of orientations. That is, the mesh is not translated somewhere else or scaled in any way, but the orientations of rotations seem to be off. So a few observations: In the above shader notice I actually did not multiply the vertices by the mesh modelMatrix (the one which would take them to model or world or global space, whichever you prefer, since there is no parent to the mesh itself other than "the world") until after skinning. This is contrary to what I implied in the theory: if my skinning matrix takes vertices from model to joint and back to model space, I'd think the vertices should already be premultiplied by the mesh transform. But if I do so, I just get a black screen. As far as exporting the joints from Blender, my python script exports for each armature bone in bind pose, it's matrix in this way: def DFSJointTraversal(file, skeleton, jointList): for joint in jointList: poseJoint = skeleton.pose.bones[joint.name] jointTransform = poseJoint.matrix.inverted() file.write('Joint ' + joint.name + ' Transform {\n') for col in jointTransform.col: file.write('{:9f} {:9f} {:9f} {:9f}\n'.format(col[0], col[1], col[2], col[3])) DFSJointTraversal(file, skeleton, joint.children) file.write('}\n') And for current / keyframe poses (assuming I'm in the right keyframe): def exportAnimations(filepath): # Only one skeleton per scene objList = [object for object in bpy.context.scene.objects if object.type == 'ARMATURE'] if len(objList) == 0: return elif len(objList) > 1: return #raise exception? dialog box? skeleton = objList[0] jointNames = [bone.name for bone in skeleton.data.bones] for action in bpy.data.actions: # One animation clip per action in Blender, named as the action animationClipFilePath = filepath[0 : filepath.rindex('/') + 1] + action.name + ".aClip" file = open(animationClipFilePath, 'w') file.write('target skeleton: ' + skeleton.name + '\n') file.write('joints count: {:d}'.format(len(jointNames)) + '\n') skeleton.animation_data.action = action keyframeNum = max([len(fcurve.keyframe_points) for fcurve in action.fcurves]) keyframes = [] for fcurve in action.fcurves: for keyframe in fcurve.keyframe_points: keyframes.append(keyframe.co[0]) keyframes = set(keyframes) keyframes = [kf for kf in keyframes] keyframes.sort() file.write('keyframes count: {:d}'.format(len(keyframes)) + '\n') for kfIndex in keyframes: bpy.context.scene.frame_set(kfIndex) file.write('keyframe: {:d}\n'.format(int(kfIndex))) for i in range(0, len(skeleton.data.bones)): file.write('joint: {:d}\n'.format(i)) joint = skeleton.pose.bones[i] jointCurrentPoseTransform = joint.matrix translationV = jointCurrentPoseTransform.to_translation() rotationQ = jointCurrentPoseTransform.to_3x3().to_quaternion() scaleV = jointCurrentPoseTransform.to_scale() file.write('T {:9f} {:9f} {:9f}\n'.format(translationV[0], translationV[1], translationV[2])) file.write('Q {:9f} {:9f} {:9f} {:9f}\n'.format(rotationQ[1], rotationQ[2], rotationQ[3], rotationQ[0])) file.write('S {:9f} {:9f} {:9f}\n'.format(scaleV[0], scaleV[1], scaleV[2])) file.write('\n') file.close() Which I believe follow the theory explained at the beginning of my question. But then I checked out Blender's directX .x exporter for reference.. and what threw me off was that in the .x script they are exporting bind poses like so (transcribed using the same variable names I used so you can compare): if joint.parent: jointTransform = poseJoint.parent.matrix.inverted() else: jointTransform = Matrix() jointTransform *= poseJoint.matrix and exporting current keyframe poses like this: if joint.parent: jointCurrentPoseTransform = joint.parent.matrix.inverted() else: jointCurrentPoseTransform = Matrix() jointCurrentPoseTransform *= joint.matrix why are they using the parent's transform instead of the joint in question's? isn't the join transform assumed to exist in the context of a parent transform since after all it transforms from this joint's space to its parent's? Why are they concatenating in the same order for both bind poses and keyframe poses? If these two are then supposed to be concatenated with each other to cancel out the change of basis? Anyway, any ideas are appreciated.

  Read the article

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• CodePlex Daily Summary for Wednesday, March 31, 2010

  CodePlex Daily Summary for Wednesday, March 31, 2010New ProjectsBase Class Libraries: The Base Class Libraries site hosts samples, previews, and prototypes from the BCL team. BB Scheduler - BroadBand Scheduler: Broadband Scheduler is highly useful as it helps the user to set the time when the computer will automatically enable the Broadband (Internet) conn...BFBC2 PRoCon: BFBC2 PRoCon makes it easier for Bad Company 2 GSP's and private server owners to administer their BFBC2 servers. It's developed in C# and targete...Business Process Management Virtual Environment (BPMVE): This BPMVE project has been separated into 3 different projects. BPMVE_DataStructure project contains all data structures (classes and attribute...Business Rule Engine BizUnit Test Steps: Business Rule Engine BizUnit Test StepsCint: CintContent Edit Extender for Ajax.Net: The Content Edit Extender is an Ajax.Net control extender that allows in-place editing of a div tag (panel). Double-click to edit, hit enter or tab...COV Game: Cov game is a worms like game made on Silverlight with Python server.Cybera: A continuing development project of the existing but now generally inactive former Cybera project.DotNetCRM Community Edition: DotNetCRM Community Edition is an open source, enterprise class CRM built on the .NET platform. It is designed to be extensible, configurable, data...EAV: A sample EAV pattern for SQL Server with: Tables and indexes Partial referential integrity Partial data typing Updatable views (like normal SQL table)EditRegion.MVC: EditRegion.MVC may be all you want, when you do not want a full CMS. It allows html areas to be edited by nominated users or roles. The API follo...Firestarter Modeller: Firestarter ModellerHabanero.Testability: Habanero.TestabilityProSoft CMS: CMS System - scalable over an undeclared amount of servers - publishing services - version control of sitesPS-Blog.net: This is my first project here on codeplex. I would like to write my own blog software. Any comments or critcs are welcome.ReleaseMe: ReleaseMe is a simple little tool I use to copy websites, and custom Window Services, from my development machine to a specified production machin...SAAS-RD: SAAS-RD: uma ferrameta utilizada para prover integração de SaaS com aplicações externasSample Web Application using Telerik's OpenAccess ORM: Sample Web Site Application Project that uses Telerik's OpenAccess ORM for data access.Sistema Facturacion: En el proyecto de Sistema de Facturacion se desarrollara una aplicacion para el total control de un establecimiento comercial Smooth Habanero: Smooth HabaneroSouthEast Conference 2011: For the Florida Institute of Technology IEEE Chapter regarding the Southeast Hardware Conference held in Nashville, TN 2011.SQL Server Bible Standards: A SQL Server Design and Development standards document. SSAS Profiler Trace Scheduler: AS Profiler Scheduler is a tool that will enable Scheduling of SQL AS Tracing using predefined Profiler Templates. For tracking different issues th...Symbolic Algebra: Another attempt to make an algebric system but to be natively in C# under the .net framework. Theocratic Ministry School System: This is an Open Source Theocratic Ministry School System designed for Jehovah's Witnesses. It will include much of the same features as the TMS ver...Weather Report WebControls: The First Release Version:1.0.10330.2334WPF 3D Labyrinth: A project for "Design and Analysis of Computer Algorithms" subject at Kaunas University of Technology. Building a 3D labyrinth with a figure which ...WPF Zen Garden: This is intended to be a gallery for WPF Style sheets in the form of Css Zen Garden. New ReleasesAPSales CRM - Software as a Service: APSales 0.1.3: This version add some interesting features to the project: Implement "Filter By Additional Fields" in view edit Implement quick create function Im...Base Class Libraries: BigRational: BigRational builds on the BigInteger introduced in .NET Framework 4 to create an arbitrary-precision rational number type. A rational number is a ...Base Class Libraries: Long Path: The long path wrapper provides functionality to make it easier to work with paths that are longer than the current 259 character limit of the Syste...Base Class Libraries: PerfMonitor: PerfMonitor is a command-line tool for profiling the system using Event Tracing for Windows (ETW). PerfMonitor is built on top of the TraceEvent li...Base Class Libraries: TraceEvent: TraceEvent is an experimental library that greatly simplifies reading Event Tracing for Windows (ETW) events. It is used by the PerfMonitor tool. ...BB Scheduler - BroadBand Scheduler: Broadband Scheduler v2.0: - Broadband service has some of the cheap and best monthly plans for the users all over the nation. And some of the plans include unlimited night d...BuildTools - Toolset for automated builds: BuildTools 2.0 Mar 2010 Milestone: The Mar 2010 Milestone release is a contains a bug fixes for projects not explicitly setting the StartingDate property, and no longer breaks when t...Business Rule Engine BizUnit Test Steps: BRE BizUnit Test Steps Ver. 1.0: Version 1.0Claymore MVP: Claymore 1.1.0.0: Changelog Added Compact Framework support Added fluent interface to configure the library.Content Edit Extender for Ajax.Net: ContentEditExtender 1.0 for Ajax.Net: Complete with source control and test/example Website and Web Service. Built with Visual Studio 2008 with the 3.5 BCL. Control requires the AjaxCon...dylan.NET: dylan.NET v. 9.6: This stable version of the compiler for both .NET 3.5 and 4.0 adds the loading of numbers in a bult-in fashion. See code below: #refasm mscorlib...EAV: March 2010: The initial release as demoed at the SSWUG Virtual Conference Spring 2010Fax .NET: Fax .NET 1.0.1: FIX : bugs for x64 and WOW64 architecture. The zip file include : Binary file Demo executable file Help fileFluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.0 for NET 4.0 RC: Includes: Fluent.dll (with .pdb and .xml) compiled with .NET 4.0 RC Test application compiled with .NET 4.0 RC SourcesIceChat: IceChat 2009 Alpha 12.1 Full Install: Build Alpha 12.1 - March 30 2010 Fix Nick Name Change for Tabs/Server List for Queries Fix for running Channel List Multiple Times, clears list n...Import Excel data to SharePoint List: Import Data from Spreadsheet to SP List V1.5 x64: Import from Spreadsheet to a SharePoint List is the missing facet to the WSS 3.0 / MOSS 2007 List features. SharePoint lets a user create a custom...LINQ to Twitter: LINQ to Twitter Beta v2.0.9: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...mojoPortal: 2.3.4.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2341-released.aspxocculo: test: Release build for testers.PowerShell ToodleDo Module: 0.1: Initial Development Release - Very rough build.Quick Performance Monitor: Version 1.2: Fixed issue where app crash when performance counter disappear or becomes unavailable while the application is running. For now the exception is si...Quick Performance Monitor: Version 1.3: Add 'view last error'Rule 18 - Love your clipboard: Rule 18 (Visual Studio 2010 + .NET 4 RC Version): This is the second public beta for the first version of Rule 18. It has had a extensive private beta and been used in big presentations since the ...Selection Maker: Selection Maker 1.5: New Features:If the source folder does not exist,a dialog box will appear and ask the user if he/she wants to create that folder or if select anoth...sPATCH: sPatch v0.9a: + Fixed: wrong path to elementclient.exeSQL Server Bible Standards: March 2010: Initial release as presented at SSWUG Virtual Conference Spring 2010Survey - web survey & form engine: Source Code Documentation: Documentation.chm file as published with Nsurvey v. 1.9.1 - april 2005 Basic technical documentation and description of source code for developers...Theocratic Ministry School System: Theocratic Ministry School System - TMSS: This is the first release of TMSS. It is far from complete but demonstrates the possiablities of what can be done with Access 2007 using developer ...Weather Report WebControls: WeatherReport Controls: 本下载包含一个已经经过编译的二进制运行库和一个测试的WebApplication项目，是2010年3月30日发布的Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBase Class LibrariesBlogEngine.NETManaged Extensibility FrameworkFarseer Physics EngineGraffiti CMSMicrosoft Biology FoundationLINQ to Twitterpatterns & practices – Enterprise Library

  Read the article

• T-SQL Tuesday #33: Trick Shots: Undocumented, Underdocumented, and Unknown Conspiracies!

  - by Most Valuable Yak (Rob Volk)

  Mike Fal (b | t) is hosting this month's T-SQL Tuesday on Trick Shots.  I love this choice because I've been preoccupied with sneaky/tricky/evil SQL Server stuff for a long time and have been presenting on it for the past year.  Mike's directives were "Show us a cool trick or process you developed…It doesn’t have to be useful", which most of my blogging definitely fits, and "Tell us what you learned from this trick…tell us how it gave you insight in to how SQL Server works", which is definitely a new concept.  I've done a lot of reading and watching on SQL Server Internals and even attended training, but sometimes I need to go explore on my own, using my own tools and techniques.  It's an itch I get every few months, and, well, it sure beats workin'. I've found some people to be intimidated by SQL Server's internals, and I'll admit there are A LOT of internals to keep track of, but there are tons of excellent resources that clearly document most of them, and show how knowing even the basics of internals can dramatically improve your database's performance.  It may seem like rocket science, or even brain surgery, but you don't have to be a genius to understand it. Although being an "evil genius" can help you learn some things they haven't told you about. ;) This blog post isn't a traditional "deep dive" into internals, it's more of an approach to find out how a program works.  It utilizes an extremely handy tool from an even more extremely handy suite of tools, Sysinternals.  I'm not the only one who finds Sysinternals useful for SQL Server: Argenis Fernandez (b | t), Microsoft employee and former T-SQL Tuesday host, has an excellent presentation on how to troubleshoot SQL Server using Sysinternals, and I highly recommend it.  Argenis didn't cover the Strings.exe utility, but I'll be using it to "hack" the SQL Server executable (DLL and EXE) files. Please note that I'm not promoting software piracy or applying these techniques to attack SQL Server via internal knowledge. This is strictly educational and doesn't reveal any proprietary Microsoft information.  And since Argenis works for Microsoft and demonstrated Sysinternals with SQL Server, I'll just let him take the blame for it. :P (The truth is I've used Strings.exe on SQL Server before I ever met Argenis.) Once you download and install Strings.exe you can run it from the command line.  For our purposes we'll want to run this in the Binn folder of your SQL Server instance (I'm referencing SQL Server 2012 RTM): cd "C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn" C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.dll > sqldll.txt C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.exe > sqlexe.txt   I've limited myself to DLLs and EXEs that have "sql" in their names.  There are quite a few more but I haven't examined them in any detail. (Homework assignment for you!) If you run this yourself you'll get 2 text files, one with all the extracted strings from every SQL DLL file, and the other with the SQL EXE strings.  You can open these in Notepad, but you're better off using Notepad++, EditPad, Emacs, Vim or another more powerful text editor, as these will be several megabytes in size. And when you do open it…you'll find…a TON of gibberish.  (If you think that's bad, just try opening the raw DLL or EXE file in Notepad.  And by the way, don't do this in production, or even on a running instance of SQL Server.)  Even if you don't clean up the file, you can still use your editor's search function to find a keyword like "SELECT" or some other item you expect to be there.  As dumb as this sounds, I sometimes spend my lunch break just scanning the raw text for anything interesting.  I'm boring like that. Sometimes though, having these files available can lead to some incredible learning experiences.  For me the most recent time was after reading Joe Sack's post on non-parallel plan reasons.  He mentions a new SQL Server 2012 execution plan element called NonParallelPlanReason, and demonstrates a query that generates "MaxDOPSetToOne".  Joe (formerly on the Microsoft SQL Server product team, so he knows this stuff) mentioned that this new element was not currently documented and tried a few more examples to see what other reasons could be generated. Since I'd already run Strings.exe on the SQL Server DLLs and EXE files, it was easy to run grep/find/findstr for MaxDOPSetToOne on those extracts.  Once I found which files it belonged to (sqlmin.dll) I opened the text to see if the other reasons were listed.  As you can see in my comment on Joe's blog, there were about 20 additional non-parallel reasons.  And while it's not "documentation" of this underdocumented feature, the names are pretty self-explanatory about what can prevent parallel processing. I especially like the ones about cursors – more ammo! - and am curious about the PDW compilation and Cloud DB replication reasons. One reason completely stumped me: NoParallelHekatonPlan.  What the heck is a hekaton?  Google and Wikipedia were vague, and the top results were not in English.  I found one reference to Greek, stating "hekaton" can be translated as "hundredfold"; with a little more Wikipedia-ing this leads to hecto, the prefix for "one hundred" as a unit of measure.  I'm not sure why Microsoft chose hekaton for such a plan name, but having already learned some Greek I figured I might as well dig some more in the DLL text for hekaton.  Here's what I found: hekaton_slow_param_passing Occurs when a Hekaton procedure call dispatch goes to slow parameter passing code path The reason why Hekaton parameter passing code took the slow code path hekaton_slow_param_pass_reason sp_deploy_hekaton_database sp_undeploy_hekaton_database sp_drop_hekaton_database sp_checkpoint_hekaton_database sp_restore_hekaton_database e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\hkproc.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matgen.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matquery.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\sqlmeta.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\resultset.cpp Interesting!  The first 4 entries (in red) mention parameters and "slow code".  Could this be the foundation of the mythical DBCC RUNFASTER command?  Have I been passing my parameters the slow way all this time? And what about those sp_xxxx_hekaton_database procedures (in blue)? Could THEY be the secret to a faster SQL Server? Could they promise a "hundredfold" improvement in performance?  Are these special, super-undocumented DIB (databases in black)? I decided to look in the SQL Server system views for any objects with hekaton in the name, or references to them, in hopes of discovering some new code that would answer all my questions: SELECT name FROM sys.all_objects WHERE name LIKE '%hekaton%' SELECT name FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%hekaton%' Which revealed: name ------------------------ (0 row(s) affected) name ------------------------ sp_createstats sp_recompile sp_updatestats (3 row(s) affected)   Hmm.  Well that didn't find much.  Looks like these procedures are seriously undocumented, unknown, perhaps forbidden knowledge. Maybe a part of some unspeakable evil? (No, I'm not paranoid, I just like mysteries and thought that punching this up with that kind of thing might keep you reading.  I know I'd fall asleep without it.) OK, so let's check out those 3 procedures and see what they reveal when I search for "Hekaton": sp_createstats: -- filter out local temp tables, Hekaton tables, and tables for which current user has no permissions -- Note that OBJECTPROPERTY returns NULL on type="IT" tables, thus we only call it on type='U' tables   OK, that's interesting, let's go looking down a little further: ((@table_type<>'U') or (0 = OBJECTPROPERTY(@table_id, 'TableIsInMemory'))) and -- Hekaton table   Wellllll, that tells us a few new things: There's such a thing as Hekaton tables (UPDATE: I'm not the only one to have found them!) They are not standard user tables and probably not in memory UPDATE: I misinterpreted this because I didn't read all the code when I wrote this blog post. The OBJECTPROPERTY function has an undocumented TableIsInMemory option Let's check out sp_recompile: -- (3) Must not be a Hekaton procedure.   And once again go a little further: if (ObjectProperty(@objid, 'IsExecuted') <> 0 AND ObjectProperty(@objid, 'IsInlineFunction') = 0 AND ObjectProperty(@objid, 'IsView') = 0 AND -- Hekaton procedure cannot be recompiled -- Make them go through schema version bumping branch, which will fail ObjectProperty(@objid, 'ExecIsCompiledProc') = 0)   And now we learn that hekaton procedures also exist, they can't be recompiled, there's a "schema version bumping branch" somewhere, and OBJECTPROPERTY has another undocumented option, ExecIsCompiledProc.  (If you experiment with this you'll find this option returns null, I think it only works when called from a system object.) This is neat! Sadly sp_updatestats doesn't reveal anything new, the comments about hekaton are the same as sp_createstats.  But we've ALSO discovered undocumented features for the OBJECTPROPERTY function, which we can now search for: SELECT name, object_definition(OBJECT_ID) FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%OBJECTPROPERTY(%'   I'll leave that to you as more homework.  I should add that searching the system procedures was recommended long ago by the late, great Ken Henderson, in his Guru's Guide books, as a great way to find undocumented features.  That seems to be really good advice! Now if you're a programmer/hacker, you've probably been drooling over the last 5 entries for hekaton (in green), because these are the names of source code files for SQL Server!  Does this mean we can access the source code for SQL Server?  As The Oracle suggested to Neo, can we return to The Source??? Actually, no. Well, maybe a little bit.  While you won't get the actual source code from the compiled DLL and EXE files, you'll get references to source files, debugging symbols, variables and module names, error messages, and even the startup flags for SQL Server.  And if you search for "DBCC" or "CHECKDB" you'll find a really nice section listing all the DBCC commands, including the undocumented ones.  Granted those are pretty easy to find online, but you may be surprised what those web sites DIDN'T tell you! (And neither will I, go look for yourself!)  And as we saw earlier, you'll also find execution plan elements, query processing rules, and who knows what else.  It's also instructive to see how Microsoft organizes their source directories, how various components (storage engine, query processor, Full Text, AlwaysOn/HADR) are split into smaller modules. There are over 2000 source file references, go do some exploring! So what did we learn?  We can pull strings out of executable files, search them for known items, browse them for unknown items, and use the results to examine internal code to learn even more things about SQL Server.  We've even learned how to use command-line utilities!  We are now 1337 h4X0rz!  (Not really.  I hate that leetspeak crap.) Although, I must confess I might've gone too far with the "conspiracy" part of this post.  I apologize for that, it's just my overactive imagination.  There's really no hidden agenda or conspiracy regarding SQL Server internals.  It's not The Matrix.  It's not like you'd find anything like that in there: Attach Matrix Database DM_MATRIX_COMM_PIPELINES MATRIXXACTPARTICIPANTS dm_matrix_agents   Alright, enough of this paranoid ranting!  Microsoft are not really evil!  It's not like they're The Borg from Star Trek: ALTER FEDERATION DROP ALTER FEDERATION SPLIT DROP FEDERATION   #tsql2sday

  Read the article

• Making Thunar the default file browser without hiding the desktop icons

  - by Manu

  I really dislike Ubuntu's default file browser, nautilus, and decided to opt for a lighter alternative (Thunar or Xfe). I've used the following script to change the default to Thunar, but now all my icons are gone from the desktop ! The files are still there, in /home/myid/Desktop, but they do not appear. Is there a way to show them, or is this a consequence of removing nautilus as the default file browser ? Can I modify the following script* in order to keep the icons ? *copied from https://help.ubuntu.com/...: ## Originally written by aysiu from the Ubuntu Forums ## This is GPL'ed code ## So improve it and re-release it ## Define portion to make Thunar the default if that appears to be the appropriate action makethunardefault() { ## I went with --no-install-recommends because ## I didn't want to bring in a whole lot of junk, ## and Jaunty installs recommended packages by default. echo -e "\nMaking sure Thunar is installed\n" sudo apt-get update && sudo apt-get install thunar --no-install-recommends ## Does it make sense to change to the directory? ## Or should all the individual commands just reference the full path? echo -e "\nChanging to application launcher directory\n" cd /usr/share/applications echo -e "\nMaking backup directory\n" ## Does it make sense to create an entire backup directory? ## Should each file just be backed up in place? sudo mkdir nonautilusplease echo -e "\nModifying folder handler launcher\n" sudo cp nautilus-folder-handler.desktop nonautilusplease/ ## Here I'm using two separate sed commands ## Is there a way to string them together to have one ## sed command make two replacements in a single file? sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-folder-handler.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-folder-handler.desktop echo -e "\nModifying browser launcher\n" sudo cp nautilus-browser.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop --browser/thunar/g' nautilus-browser.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-browser.desktop echo -e "\nModifying computer icon launcher\n" sudo cp nautilus-computer.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-computer.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-computer.desktop echo -e "\nModifying home icon launcher\n" sudo cp nautilus-home.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-home.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-home.desktop echo -e "\nModifying general Nautilus launcher\n" sudo cp nautilus.desktop nonautilusplease/ sudo sed -i -n 's/Exec=nautilus/Exec=thunar/g' nautilus.desktop ## This last bit I'm not sure should be included ## See, the only thing that doesn't change to the ## new Thunar default is clicking the files on the desktop, ## because Nautilus is managing the desktop (so technically ## it's not launching a new process when you double-click ## an icon there). ## So this kills the desktop management of icons completely ## Making the desktop pretty useless... would it be better ## to keep Nautilus there instead of nothing? Or go so far ## as to have Xfce manage the desktop in Gnome? echo -e "\nChanging base Nautilus launcher\n" sudo dpkg-divert --divert /usr/bin/nautilus.old --rename /usr/bin/nautilus && sudo ln -s /usr/bin/thunar /usr/bin/nautilus echo -e "\nRemoving Nautilus as desktop manager\n" killall nautilus echo -e "\nThunar is now the default file manager. To return Nautilus to the default, run this script again.\n" } restorenautilusdefault() { echo -e "\nChanging to application launcher directory\n" cd /usr/share/applications echo -e "\nRestoring backup files\n" sudo cp nonautilusplease/nautilus-folder-handler.desktop . sudo cp nonautilusplease/nautilus-browser.desktop . sudo cp nonautilusplease/nautilus-computer.desktop . sudo cp nonautilusplease/nautilus-home.desktop . sudo cp nonautilusplease/nautilus.desktop . echo -e "\nRemoving backup folder\n" sudo rm -r nonautilusplease echo -e "\nRestoring Nautilus launcher\n" sudo rm /usr/bin/nautilus && sudo dpkg-divert --rename --remove /usr/bin/nautilus echo -e "\nMaking Nautilus manage the desktop again\n" nautilus --no-default-window & ## The only change that isn't undone is the installation of Thunar ## Should Thunar be removed? Or just kept in? ## Don't want to load the script with too many questions? } ## Make sure that we exit if any commands do not complete successfully. ## Thanks to nanotube for this little snippet of code from the early ## versions of UbuntuZilla set -o errexit trap 'echo "Previous command did not complete successfully. Exiting."' ERR ## This is the main code ## Is it necessary to put an elseif in here? Or is ## redundant, since the directory pretty much ## either exists or it doesn't? ## Is there a better way to keep track of whether ## the script has been run before? if [[ -e /usr/share/applications/nonautilusplease ]]; then restorenautilusdefault else makethunardefault fi;

  Read the article

• Robotic Arm &ndash; Hardware

  - by Szymon Kobalczyk

  This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

  Read the article

• MSCC: Scripting - Administrator's­ toolbox of magic...

  Finally, we made it to have our April meetup - in May. The most obvious explanation is the increased amount of open source and IT activities that either the MSCC, the Linux User Group of Mauritius (LUGM), or the University of Mauritius Student's Computer Club is organising. It's absolutely incredible to see the recent hype of events here on the island. And I'm loving it! Unfortunately, we also had to deal with arranging for a location this time. It was kind of an odyssey as my requests (and phone calls) haven't been answered, even though I tried it several times - well, kind of disappointing and I have to look into that for future gatherings. In my opinion, it is essential that two parameters of a community meeting are fixed as early as possible: Location, and Date and time You can't just change one or both on the very last minute. Well, this time we had to do it due to unforeseen reasons, and I apologise to any MSCC member which couldn't make it to our April meetup. Okay, lesson learned but now back to the actual meetup report ... Shortly after the meeting I placed the following statement as my first impression: "Spontaneous and improvised :) No, seriously, Ish and Dan had well prepared presentations on shell scripting, mainly focused towards Bourne Again Shell (bash), and the pros and cons of scripting versus actually writing something in a decent programming language. I thought that I could cut myself out of the equation but the demand for information about PowerShell was higher than expected..." Well, it turned out that the interest in Windows PowerShell was high, as I even got a couple of questions on it via social media networks during the evening. I also like to mention that the number of attendees went back to what I would call a "standard" number of participation. This time there were 12 craftsmen, but again a good number of First Timers. Reactions of other attendees Here are some impressions and feedback from our participants: "Enjoyed the bash and powershell (linux / windows) presentations ..." -- Nadim on event comments "He [Daniel] also showed us some syntax loopholes in Bash that could leave someone with bad code." -- Ish on MSCC – Let's talk about Scripting   Glad to see a couple of first time attendees, especially students from the university itself. Some details on the presentations MSCC: First time visit at the University of Mauritius - Phase II Engineering Tower, room 2.9 Gimme some love ... bash and other shells Ish gave a great introduction into shell scripting as he spoke about existing shell environments and a little bit about their history. Furthermore, he talked about various built-in commands, the use of coreutils, the ability to daisy-chain multiple commands using pipes, the importance of the standard I/O streams and their file descriptors in advanced scripting techniques. Combined with a couple of sample statements in the Linux terminal on Ubuntu 14.04 machine it was a solid presentation. Have a closer look at his slides - published on his blog on MSCC – Let's talk about Scripting. Oddities of scripting After the brief introduction into bash it was Daniel's turn to highlight a good number of oddities when working with shell scripts. First of all, it should be clear that scripting is not supposed for any kind of implementations in terms of software but simply to automate administrative procedures and to simplify routine jobs on a system. One of the cool oddities that he mentioned is that everything (!) in a shell is represented by strings; there are no other types like integer, float, date-time, etc. that you'd like to use in a full-fledged programming language. Let's have a look at his sample:  more to come... What's the output? As a conclusion, Daniel suggests that shell scripting should be limited but not restricted to automatic repetitive command stacks and batch jobs, startup wrapper for applications in order to set up the execution environment, and other not too sophisticated jobs. But as soon as it might involve a little bit more logic or you might rely on performance it's better to write an application in Ruby, Python, or Perl (among others of course). This is also enables the possibility to test your code properly. MSCC: Ish talking about Bourne Again Shell (bash) and shell scripting to automate regular tasks MSCC: Daniel gives an overview about the pros and cons of shell scripting versus programming MSCC: PowerShell as your scripting solution on Windows operating systems The path of the Enlightened is long ... and tough. Honestly, even though PowerShell was mentioned without any further details on the meetup's agenda, I didn't expect that there would be demand to give a presentation on Microsoft PowerShell after all. I already took this topic out of the announcement but the audience wanted to have some information. Okay, then let's see what I could do - improvised style. While my machine booted and got hooked up to the projector, I started to talk about the beginnings of PowerShell from back in 2006, and its predecessors MS DOS and Command Prompt. A throwback in history... always good for young people. As usual, Microsoft didn't get it at that time. Instead of listening to their client's needs and demands they ignored the feasibility to administrate Windows server farms without any UI tools. PowerShell is actually a result of this, and seeing that shell scripting is a common, reliable and fast way in an administrator's toolbox for decades, Microsoft had to adapt from their Microsoft Management Console (MMC) to a broader approach. It's not like shell scripting was something new; it is in daily use by alternative operating systems like AIX, HP UX, Solaris, and last but not least Linux. Most interestingly, Microsoft is very good at renovating existing architectures, and over the years PowerShell not only replaced their own combination of Command Prompt and Scripting Hosts (VBScript and CScript) but really turned into a challenging competitor on the market. The shell is easy to extend with cmdlets, and open to other Microsoft products like SQL Server, SharePoint, as well as Third-party software applications. Similar to MMC PowerShell also offers the ability to administer other machine remotely - only without a graphical user interface and therefore it's easier to automate and schedule regular tasks. Following is a sample of a PowerShell script file (extension .ps1): $strComputer = "." $colItems = get-wmiobject -class Win32_BIOS -namespace root\CIMV2 -comp $strComputer foreach ($objItem in $colItems) {write-host "BIOS Characteristics: " $objItem.BiosCharacteristicswrite-host "BIOS Version: " $objItem.BIOSVersionwrite-host "Build Number: " $objItem.BuildNumberwrite-host "Caption: " $objItem.Captionwrite-host "Code Set: " $objItem.CodeSetwrite-host "Current Language: " $objItem.CurrentLanguagewrite-host "Description: " $objItem.Descriptionwrite-host "Identification Code: " $objItem.IdentificationCodewrite-host "Installable Languages: " $objItem.InstallableLanguageswrite-host "Installation Date: " $objItem.InstallDatewrite-host "Language Edition: " $objItem.LanguageEditionwrite-host "List Of Languages: " $objItem.ListOfLanguageswrite-host "Manufacturer: " $objItem.Manufacturerwrite-host "Name: " $objItem.Namewrite-host "Other Target Operating System: " $objItem.OtherTargetOSwrite-host "Primary BIOS: " $objItem.PrimaryBIOSwrite-host "Release Date: " $objItem.ReleaseDatewrite-host "Serial Number: " $objItem.SerialNumberwrite-host "SMBIOS BIOS Version: " $objItem.SMBIOSBIOSVersionwrite-host "SMBIOS Major Version: " $objItem.SMBIOSMajorVersionwrite-host "SMBIOS Minor Version: " $objItem.SMBIOSMinorVersionwrite-host "SMBIOS Present: " $objItem.SMBIOSPresentwrite-host "Software Element ID: " $objItem.SoftwareElementIDwrite-host "Software Element State: " $objItem.SoftwareElementStatewrite-host "Status: " $objItem.Statuswrite-host "Target Operating System: " $objItem.TargetOperatingSystemwrite-host "Version: " $objItem.Versionwrite-host} Which gives you information about your BIOS and Windows OS. Then change the computer name to another one on your network (NetBIOS based) and run the script again. There lots of samples and tutorials at the Microsoft Script Center, and I would advise you to pay a visit over there if you are more interested in PowerShell. The Script Center provides the download links, too. Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Hacking Defence (14. May 2014) WebCup Maurice (7. & 8. June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! My resume of the day Spontaneous and improvised :) The new location at the University of Mauritius turned out very well, there is plenty of space, and it could be a good choice for future meetings. Especially, having the ability to get more and more students into our IT community sounds like a great opportunity. Later during the day, I got some promising mails from Nadim regarding future sessions at the local branch of the Middlesex University. Well, we will see in the future... But for now this will be on hold until approximately October when students resume their regular studies. Anyway, it was a good experience at the university, and thanks again to the UoM Student's Computer Club that made the necessary arrangements for the MSCC!

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• Ubuntu 11.10, using wget/curl fails with ssl

  - by Greg Spiers

  Note: See edit 3 for solution On a completely new install of Ubuntu I'm getting the following errors when using wget: wget https://test.sagepay.com --2012-03-27 12:55:12-- https://test.sagepay.com/ Resolving test.sagepay.com... 195.170.169.8 Connecting to test.sagepay.com|195.170.169.8|:443... connected. ERROR: cannot verify test.sagepay.com's certificate, issued by `/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA': Unable to locally verify the issuer's authority. To connect to test.sagepay.com insecurely, use `--no-check-certificate'. I've tried installing ca-certificates and configuring the ca-certs and they appear to all be setup in /etc/ssl/certs. The same issue exists for cURL: curl https://test.sagepay.com curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed Which leads me to believe it's something wrong with openssl server wide. wget and curl both work correctly locally on OSX and I have confirmed with a few people that it's working on their servers so I suspect it's nothing to do with the server I'm attempting to connect to. Any ideas or suggestions on things to try to narrow it down? Thank you Edit As requested verbose output from curl curl -Iv https://test.sagepay.com * About to connect() to test.sagepay.com port 443 (#0) * Trying 195.170.169.8... connected * Connected to test.sagepay.com (195.170.169.8) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html Edit 2 Using the hash from your comment I see this: ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al 7651b327.0 lrwxrwxrwx 1 root root 59 2012-03-27 12:48 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority.pem ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al Verisign_Class_3_Public_Primary_Certification_Authority.pem lrwxrwxrwx 1 root root 94 2012-01-18 07:21 Verisign_Class_3_Public_Primary_Certification_Authority.pem -> /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -rw-r--r-- 1 root root 834 2011-09-28 14:53 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- But doing the steps myself I end up with a different hash: strace -o /tmp/foo.out curl -Iv https://test.sagepay.com and grep ssl /tmp/foo.out open("/lib/x86_64-linux-gnu/libssl.so.1.0.0", O_RDONLY) = 3 stat("/etc/ssl/certs/415660c1.0", {st_mode=S_IFREG|0644, st_size=834, ...}) = 0 open("/etc/ssl/certs/415660c1.0", O_RDONLY) = 4 stat("/etc/ssl/certs/415660c1.1", 0x7fff7dab07b0) = -1 ENOENT (No such file or directory) readlink -f /etc/ssl/certs/415660c1.0 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- Any other ideas? Thank you for the help so far :) Edit 3 So it turns out that installing the ca-certificates package didn't install the one that I needed. I found this post about certificates being presented out of order. This seems to be the case with my request to sagepay. The solution ended up being to install another CA certificate from Verisign. I'm not sure why this fixes the issue with it being out of order but it does, but I suspect the out of order issue really isn't a problem at all and it was infact because I was missing a certificate all along. The additional certificate is available in that post but I didn't want to blindly trust it. I've looked at the list of CA certificates from cURL's site and it is listed there so I do trust it. The certificate: Verisign Class 3 Public Primary Certification Authority ======================================================= -----BEGIN CERTIFICATE----- MIICPDCCAaUCEHC65B0Q2Sk0tjjKewPMur8wDQYJKoZIhvcNAQECBQAwXzELMAkGA1UEBhMCVVMx FzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmltYXJ5 IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVow XzELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAz IFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUA A4GNADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhEBarsAx94 f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/isI19wKTakyYbnsZogy1Ol hec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0GCSqGSIb3DQEBAgUAA4GBALtMEivPLCYA TxQT3ab7/AoRhIzzKBxnki98tsX63/Dolbwdj2wsqFHMc9ikwFPwTtYmwHYBV4GSXiHx0bH/59Ah WM1pF+NEHJwZRDmJXNycAA9WjQKZ7aKQRUzkuxCkPfAyAw7xzvjoyVGM5mKf5p/AfbdynMk2Omuf Tqj/ZA1k -----END CERTIFICATE----- I put this in a file in: /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt I then modified the /etc/ca-certificates.conf and added the following line at the end: curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt After that I ran the command: sudo update-ca-certificates Looking into the /etc/ssl/certs directory I see it correctly linked: ls -al | grep cURL lrwxrwxrwx 1 root root 69 2012-03-27 16:03 415660c1.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 69 2012-03-27 16:03 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 101 2012-03-27 16:03 Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem -> /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt And everything works! curl -I https://test.sagepay.com HTTP/1.1 200 OK...

  Read the article

• SQL – Migrate Database from SQL Server to NuoDB – A Quick Tutorial

  - by Pinal Dave

  Data is growing exponentially and every organization with growing data is thinking of next big innovation in the world of Big Data. Big data is a indeed a future for every organization at one point of the time. Just like every other next big thing, big data has its own challenges and issues. The biggest challenge associated with the big data is to find the ideal platform which supports the scalability and growth of the data. If you are a regular reader of this blog, you must be familiar with NuoDB. I have been working with NuoDB for a while and their recent release is the best thus far. NuoDB is an elastically scalable SQL database that can run on local host, datacenter and cloud-based resources. A key feature of the product is that it does not require sharding (read more here). Last week, I was able to install NuoDB in less than 90 seconds and have explored their Explorer and Admin sections. You can read about my experiences in these posts: SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database Many SQL Authority readers have been following me in my journey to evaluate NuoDB. One of the frequently asked questions I’ve received from you is if there is any way to migrate data from SQL Server to NuoDB. The fact is that there is indeed a way to do so and NuoDB provides a fantastic tool which can help users to do it. NuoDB Migrator is a command line utility that supports the migration of Microsoft SQL Server, MySQL, Oracle, and PostgreSQL schemas and data to NuoDB. The migration to NuoDB is a three-step process: NuoDB Migrator generates a schema for a target NuoDB database It loads data into the target NuoDB database It dumps data from the source database Let’s see how we can migrate our data from SQL Server to NuoDB using a simple three-step approach. But before we do that we will create a sample database in MSSQL and later we will migrate the same database to NuoDB: Setup Step 1: Build a sample data CREATE DATABASE [Test]; CREATE TABLE [Department]( [DepartmentID] [smallint] NOT NULL, [Name] VARCHAR(100) NOT NULL, [GroupName] VARCHAR(100) NOT NULL, [ModifiedDate] [datetime] NOT NULL, CONSTRAINT [PK_Department_DepartmentID] PRIMARY KEY CLUSTERED ( [DepartmentID] ASC ) ) ON [PRIMARY]; INSERT INTO Department SELECT * FROM AdventureWorks2012.HumanResources.Department; Note that I am using the SQL Server AdventureWorks database to build this sample table but you can build this sample table any way you prefer. Setup Step 2: Install Java 64 bit Before you can begin the migration process to NuoDB, make sure you have 64-bit Java installed on your computer. This is due to the fact that the NuoDB Migrator tool is built in Java. You can download 64-bit Java for Windows, Mac OSX, or Linux from the following link: http://java.com/en/download/manual.jsp. One more thing to remember is that you make sure that the path in your environment settings is set to your JAVA_HOME directory or else the tool will not work. Here is how you can do it: Go to My Computer >> Right Click >> Select Properties >> Click on Advanced System Settings >> Click on Environment Variables >> Click on New and enter the following values. Variable Name: JAVA_HOME Variable Value: C:\Program Files\Java\jre7 Make sure you enter your Java installation directory in the Variable Value field. Setup Step 3: Install JDBC driver for SQL Server. There are two JDBC drivers available for SQL Server.  Select the one you prefer to use by following one of the two links below: Microsoft JDBC Driver jTDS JDBC Driver In this example we will be using jTDS JDBC driver. Once you download the driver, move the driver to your NuoDB installation folder. In my case, I have moved the JAR file of the driver into the C:\Program Files\NuoDB\tools\migrator\jar folder as this is my NuoDB installation directory. Now we are all set to start the three-step migration process from SQL Server to NuoDB: Migration Step 1: NuoDB Schema Generation Here is the command I use to generate a schema of my SQL Server Database in NuoDB. First I go to the folder C:\Program Files\NuoDB\tools\migrator\bin and execute the nuodb-migrator.bat file. Note that my database name is ‘test’. Additionally my username and password is also ‘test’. You can see that my SQL Server database is running on my localhost on port 1433. Additionally, the schema of the table is ‘dbo’. nuodb-migrator schema –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.path=/tmp/schema.sql The above script will generate a schema of all my SQL Server tables and will put it in the folder C:\tmp\schema.sql . You can open the schema.sql file and execute this file directly in your NuoDB instance. You can follow the link here to see how you can execute the SQL script in NuoDB. Please note that if you have not yet created the schema in the NuoDB database, you should create it before executing this step. Step 2: Generate the Dump File of the Data Once you have recreated your schema in NuoDB from SQL Server, the next step is very easy. Here we create a CSV format dump file, which will contain all the data from all the tables from the SQL Server database. The command to do so is very similar to the above command. Be aware that this step may take a bit of time based on your database size. nuodb-migrator dump –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.type=csv –output.path=/tmp/dump.cat Once the above command is successfully executed you can find your CSV file in the C:\tmp\ folder. However, you do not have to do anything manually. The third and final step will take care of completing the migration process. Migration Step 3: Load the Data into NuoDB After building schema and taking a dump of the data, the very next step is essential and crucial. It will take the CSV file and load it into the NuoDB database. nuodb-migrator load –target.url=jdbc:com.nuodb://localhost:48004/mytest –target.schema=dbo –target.username=test –target.password=test –input.path=/tmp/dump.cat Please note that in the above script we are now targeting the NuoDB database, which we have already created with the name of “MyTest”. If the database does not exist, create it manually before executing the above script. I have kept the username and password as “test”, but please make sure that you create a more secure password for your database for security reasons. Voila!  You’re Done That’s it. You are done. It took 3 setup and 3 migration steps to migrate your SQL Server database to NuoDB.  You can now start exploring the database and build excellent, scale-out applications. In this blog post, I have done my best to come up with simple and easy process, which you can follow to migrate your app from SQL Server to NuoDB. Download NuoDB I strongly encourage you to download NuoDB and go through my 3-step migration tutorial from SQL Server to NuoDB. Additionally here are two very important blog post from NuoDB CTO Seth Proctor. He has written excellent blog posts on the concept of the Administrative Domains. NuoDB has this concept of an Administrative Domain, which is a collection of hosts that can run one or multiple databases.  Each database has its own TEs and SMs, but all are managed within the Admin Console for that particular domain. http://www.nuodb.com/techblog/2013/03/11/getting-started-provisioning-a-domain/ http://www.nuodb.com/techblog/2013/03/14/getting-started-running-a-database/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• How can a code editor effectively hint at code nesting level - without using indentation?

  - by pgfearo

  I've written an XML text editor that provides 2 view options for the same XML text, one indented (virtually), the other left-justified. The motivation for the left-justified view is to help users 'see' the whitespace characters they're using for indentation of plain-text or XPath code without interference from indentation that is an automated side-effect of the XML context. I want to provide visual clues (in the non-editable part of the editor) for the left-justified mode that will help the user, but without getting too elaborate. I tried just using connecting lines, but that seemed too busy. The best I've come up with so far is shown in a mocked up screenshot of the editor below, but I'm seeking better/simpler alternatives (that don't require too much code). [Edit] Taking the heatmap idea (from: @jimp) I get this and 3 alternatives - labelled a, b and c: The following section describes the accepted answer as a proposal, bringing together ideas from a number of other answers and comments. As this question is now community wiki, please feel free to update this. NestView The name for this idea which provides a visual method to improve the readability of nested code without using indentation. Contour Lines The name for the differently shaded lines within the NestView The image above shows the NestView used to help visualise an XML snippet. Though XML is used for this illustration, any other code syntax that uses nesting could have been used for this illustration. An Overview: The contour lines are shaded (as in a heatmap) to convey nesting level The contour lines are angled to show when a nesting level is being either opened or closed. A contour line links the start of a nesting level to the corresponding end. The combined width of contour lines give a visual impression of nesting level, in addition to the heatmap. The width of the NestView may be manually resizable, but should not change as the code changes. Contour lines can either be compressed or truncated to keep acheive this. Blank lines are sometimes used code to break up text into more digestable chunks. Such lines could trigger special behaviour in the NestView. For example the heatmap could be reset or a background color contour line used, or both. One or more contour lines associated with the currently selected code can be highlighted. The contour line associated with the selected code level would be emphasized the most, but other contour lines could also 'light up' in addition to help highlight the containing nested group Different behaviors (such as code folding or code selection) can be associated with clicking/double-clicking on a Contour Line. Different parts of a contour line (leading, middle or trailing edge) may have different dynamic behaviors associated. Tooltips can be shown on a mouse hover event over a contour line The NestView is updated continously as the code is edited. Where nesting is not well-balanced assumptions can be made where the nesting level should end, but the associated temporary contour lines must be highlighted in some way as a warning. Drag and drop behaviors of Contour Lines can be supported. Behaviour may vary according to the part of the contour line being dragged. Features commonly found in the left margin such as line numbering and colour highlighting for errors and change state could overlay the NestView. Additional Functionality The proposal addresses a range of additional issues - many are outside the scope of the original question, but a useful side-effect. Visually linking the start and end of a nested region The contour lines connect the start and end of each nested level Highlighting the context of the currently selected line As code is selected, the associated nest-level in the NestView can be highlighted Differentiating between code regions at the same nesting level In the case of XML different hues could be used for different namespaces. Programming languages (such as c#) support named regions that could be used in a similar way. Dividing areas within a nesting area into different visual blocks Extra lines are often inserted into code to aid readability. Such empty lines could be used to reset the saturation level of the NestView's contour lines. Multi-Column Code View Code without indentation makes the use of a multi-column view more effective because word-wrap or horizontal scrolling is less likely to be required. In this view, once code has reach the bottom of one column, it flows into the next one: Usage beyond merely providing a visual aid As proposed in the overview, the NestView could provide a range of editing and selection features which would be broadly in line with what is expected from a TreeView control. The key difference is that a typical TreeView node has 2 parts: an expander and the node icon. A NestView contour line can have as many as 3 parts: an opener (sloping), a connector (vertical) and a close (sloping). On Indentation The NestView presented alongside non-indented code complements, but is unlikely to replace, the conventional indented code view. It's likely that any solutions adopting a NestView, will provide a method to switch seamlessly between indented and non-indented code views without affecting any of the code text itself - including whitespace characters. One technique for the indented view would be 'Virtual Formatting' - where a dynamic left-margin is used in lieu of tab or space characters. The same nesting-level data used to dynamically render the NestView could also used for the more conventional-looking indented view. Printing Indentation will be important for the readability of printed code. Here, the absence of tab/space characters and a dynamic left-margin means that the text can wrap at the right-margin and still maintain the integrity of the indented view. Line numbers can be used as visual markers that indicate where code is word-wrapped and also the exact position of indentation: Screen Real-Estate: Flat Vs Indented Addressing the question of whether the NestView uses up valuable screen real-estate: Contour lines work well with a width the same as the code editor's character width. A NestView width of 12 character widths can therefore accommodate 12 levels of nesting before contour lines are truncated/compressed. If an indented view uses 3 character-widths for each nesting level then space is saved until nesting reaches 4 levels of nesting, after this nesting level the flat view has a space-saving advantage that increases with each nesting level. Note: A minimum indentation of 4 character widths is often recommended for code, however XML often manages with less. Also, Virtual Formatting permits less indentation to be used because there's no risk of alignment issues A comparison of the 2 views is shown below: Based on the above, its probably fair to conclude that view style choice will be based on factors other than screen real-estate. The one exception is where screen space is at a premium, for example on a Netbook/Tablet or when multiple code windows are open. In these cases, the resizable NestView would seem to be a clear winner. Use Cases Examples of real-world examples where NestView may be a useful option: Where screen real-estate is at a premium a. On devices such as tablets, notepads and smartphones b. When showing code on websites c. When multiple code windows need to be visible on the desktop simultaneously Where consistent whitespace indentation of text within code is a priority For reviewing deeply nested code. For example where sub-languages (e.g. Linq in C# or XPath in XSLT) might cause high levels of nesting. Accessibility Resizing and color options must be provided to aid those with visual impairments, and also to suit environmental conditions and personal preferences: Compatability of edited code with other systems A solution incorporating a NestView option should ideally be capable of stripping leading tab and space characters (identified as only having a formatting role) from imported code. Then, once stripped, the code could be rendered neatly in both the left-justified and indented views without change. For many users relying on systems such as merging and diff tools that are not whitespace-aware this will be a major concern (if not a complete show-stopper). Other Works: Visualisation of Overlapping Markup Published research by Wendell Piez, dated from 2004, addresses the issue of the visualisation of overlapping markup, specifically LMNL. This includes SVG graphics with significant similarities to the NestView proposal, as such, they are acknowledged here. The visual differences are clear in the images (below), the key functional distinction is that NestView is intended only for well-nested XML or code, whereas Wendell Piez's graphics are designed to represent overlapped nesting. The graphics above were reproduced - with kind permission - from http://www.piez.org Sources: Towards Hermenutic Markup Half-steps toward LMNL

  Read the article

• User Experience Highlights in PeopleSoft and PeopleTools: Direct from Jeff Robbins

  - by mvaughan

  By Kathy Miedema, Oracle Applications User Experience  This is the fifth in a series of blog posts on the user experience (UX) highlights in various Oracle product families. The last posted interview was with Nadia Bendjedou, Senior Director, Product Strategy on upcoming Oracle E-Business Suite user experience highlights. You’ll see themes around productivity and efficiency, and get an early look at the latest mobile offerings coming through these product lines. Today’s post is on the user experience in PeopleSoft and PeopleTools. To learn more about what’s ahead, attend PeopleSoft or PeopleTools OpenWorld presentations.This interview is with Jeff Robbins, Senior Director, PeopleSoft Development. Jeff Robbins Q: How would you describe the vision you have for the user experience of PeopleSoft?A: Intuitive – Specifically, customers use PeopleSoft to help their employees do their day-to-day work, and the UI (user interface) has been helpful and assistive in that effort. If it’s not obvious what they need to do a task, then the UI isn’t working. So the application needs to make it simple for users to find information they need, complete a task, do all the things they are responsible for, and it really helps when the UI just makes sense. Productive – PeopleSoft is a tool used to support people to do their work, and a lot of users are measured by how much work they’re able to get done per hour, per day, etc. The UI needs to help them be as productive as possible, and can’t make them waste time or energy. The UI needs to reflect the type of work necessary for a task -- if it's data entry, the UI needs to assist the user to get information into the system. For analysts, the UI needs help users assess or analyze information in a particular way. Innovative – The concept of the UI being innovative is something we’ve been working on for years. It’s not just that we want to be seen as innovative, the fact is that companies are asking their employees to do more than they’ve ever asked before. More often companies want to roll out processes as employee or manager self-service, where an employee is responsible to review and maintain their own data. So we’ve had to reinvent, and ask,  “How can we modify the ways an employee interacts with our applications so that they can be more productive and efficient – even with tasks that are entirely unfamiliar?”  Our focus on innovation has forced us to design new ways for users to interact with the entire application.Q: How are the UX features you have delivered so far resonating with customers?  A: Resonating very well. We’re hearing tremendous responses from users, managers, decision-makers -- who are very happy with the improved user experience. Many of the individual features resonate well. Some have really hit home, others are better than they used to be but show us that there’s still room for improvement.A couple innovations really stand out; features that have a significant effect on how users interact with PeopleSoft.First, the deployment of PeopleSoft in a way that’s more like a consumer website with the PeopleSoft Home page and Dashboards.  This new approach is very web-centric, where users feel they’re coming to a website rather than logging into an enterprise application.  There’s lots of information from all around the organization collected in a way that feels very familiar to users. In order to do your job, you can come to this web site rather than having to learn how to log into an application and figure out a complicated menu. Companies can host these really rich web sites for employees that are home pages for accessing critical tasks and information. The UI elements of incorporating search into the whole navigation process is another hit. Rather than having to log in and choose a task from a menu, users come to the web site and begin a task by simply searching for data: themselves, another employee, a customer record, whatever.  The search results include the data along with a set of actions the user might take, completely eliminating the need to hunt through a complicated system menu. Search-centric navigation is really sitting well with customers who are trying to deploy an intuitive set of systems. Q: Are any UX highlights more popular than you expected them to be?  A: We introduced a feature called Pivot Grid in the last release, which is a combination of an interactive grid, like an Excel Pivot Table, along with a dynamic visual chart that automatically graphs the data. I wasn’t certain at first how extensively this would be used. It looked like an innovative tool, but it wasn’t clear how it would be incorporated in business process applications. The fact is that everyone who sees Pivot Grids is thrilled with that kind of interactivity.  It reflects the amount of analytical thinking customers are asking employees to do. Employees can’t just enter data any more. They must interact with it, analyze it, and make decisions. Pivot Grids fit into this way of working. Q: What can you tell us about PeopleSoft’s mobile offerings?A: A lot of customers are finding that mobile is the chief priority in their organization.  They tell us they want their employees to be able to access company information from their mobile devices.  Of course, not everyone has the same requirements, so we’re working to make sure we can help our customers accomplish what they’re trying to do.  We’ve already delivered a number of mobile features.  For instance, PeopleSoft home pages, dashboards and workcenters all work well on an iPad, straight out of the box.  We’ve delivered a number of key functions and tasks for mobile workers – those who are responsible for using a mobile device to manage inventory, for example.  Customers tell us they also need a holistic strategy, one that allows their employees to access nearly every task from a mobile device.  While we don’t expect users to do extensive data entry from their smartphone, it makes sense that they have access to company information and systems while away from their desk.  That’s where our strategy is going now.  We plan to unveil a number of new mobile offerings at OpenWorld.  Some will be available then, some shortly after. Q: What else are you working on now that you think is going to be exciting to customers at Oracle OpenWorld?A: Our next release -- the big thing is PeopleSoft 9.2, and we’ll be talking about the huge amount of work that’s gone into the next versions. A new toolset, 8.53, will be coming, and there’s a lot to talk about there, and the next generation of PeopleSoft 9.2.  We have a ton of new stuff coming.Q: What do you want PeopleSoft customers to know? A: We have been focusing on the user experience in PeopleSoft as a very high priority for the last 4 years, and it’s had interesting effects. One thing is that the application is better, more usable.  We’ve made visible improvements. Another aspect is that in customers’ minds, the PeopleSoft brand is being reinvigorated. Customers invested in PeopleSoft years ago, and then they weren’t sure where PeopleSoft was going.  This investment in the UI and overall user experience keeps PeopleSoft current, innovative and fresh.  Customers  are able to take advantage of a lot of new features, even on the older applications, simply by upgrading their PeopleTools. The interest in that ability has been tremendous. Knowing they have a lot of these features available -- right now, that’s pretty huge. There’s been a tremendous amount of positive response, just on the fact that we’re focusing on the user experience. Editor’s note: For more on PeopleSoft and PeopleTools user experience highlights, visit the Usable Apps web site.To find out more about these enhancements at Openworld, be sure to check out these sessions: GEN8928     General Session: PeopleSoft Update and Product RoadmapCON9183     PeopleSoft PeopleTools Technology Roadmap CON8932     New Functional PeopleSoft PeopleTools Capabilities for the Line-of-Business UserCON9196     PeopleSoft PeopleTools Roadmap: Mobile ApplicationsCON9186     Case Study: Delivering a Groundbreaking User Interface with PeopleSoft PeopleTools

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >