Search Results

Search found 22641 results on 906 pages for 'use case'.

Page 628/906 | < Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• Unable to access stackexchange sites from this system

  - by Sandeepan Nath

  Earlier, I was not able to access most of the stackexchange sites like stackoverflow, programmers.SE etc. on my home Windows XP system. I was able to access only a few like http://meta.stackexchange.com and not even http://www.meta.stackexchange.com (note the www). I tried many other sites like http://www.stackoverflow.com, http://area51.stackexchange.com/ but was getting page not found errors on all browsers. Even pinging from terminal was saying destination host unreachable. I did not check recently but may be all SE sites are unreachable now. I was clueless about what could be the issue. I thought some firewall issue? So, I stopped AVG antivirus's firewall, then completely uninstalled it and even turned of windows firewall. But still not reachable even after fresh installation of Windows 7. Then I noticed a "Too many requests" notice on google. This page - http://www.google.co.in/sorry/?continue=http://www.google.co.in/# I don't know why this appeared but I guess somehow too many requests might have been sent to these sites and they blocked me. But in that case, SE would be smart enough to show a captcha like google. So, how to confirm the problem and fix it. Similar questions like these don't look solved yet - Unable to access certain websites Unable to Access Certain Websites I have lately started actively participating in lots of SE sites. There are new new questions popping up in my mind every time and I am not able to ask them. Please help! Thanks

  Read the article

• Cannot log into Oracle Enterprise Manager 11g: ORA-28001

  - by Álvaro G. Vicario

  I can no longer log into Oracle Enterprise Manager 11g. I get this error message: ORA-28001: the password has expired (DBD ERROR: OCISessionBegin) I could log into the server using SQL*Plus. I warned me that the password was going to expire in 7 days (which is not the same as being already expired). Following advice from several documents, I ran these commands from SQL*Plus: ALTER USER sys IDENTIFIED BY new_password; ALTER USER system IDENTIFIED BY new_password; SQL*Plus no longer warns about passwords, but I still cannot use the Enterprise Manager. Then I followed this to remove password expiration: ALTER PROFILE default LIMIT password_life_time UNLIMITED And I've also restarted the Oracle services. In case it was using cached credentials, I've tried to connect from several browsers in several computers. No way: I still get ORA-28001 in Enterprise Manager. What am I missing? Update: Some more info SQL> select username,ACCOUNT_STATUS,EXPIRY_DATE from dba_users; USERNAME ACCOUNT_STATUS EXPIRY_D ------------------------------ -------------------------------- -------- MGMT_VIEW OPEN SYS OPEN SYSTEM OPEN

  Read the article

• SQL Server Instance login issue

  - by reallyJim

  I've just brought up a new installation of SQL Server 2008. I installed the default instance as well as one named instance. I'm having a problem connecting to the named instance from anywhere besides the server itself with any user besides 'sa'. I am running in mixed mode. I have a login/user that has a known username. Using that user/login, I can properly connect when directly on the server. When I attempt to login from anywhere else, I recieve a "Login failed for user ''", with Error 18456. In the log file in the server, I see a reason that doesn't seem to help: "Reason: Could not find a login matching the name provided.". However, that user/login DOES exist, as I can use it locally. There are no further details about the error. Where can I start to find something to help me with this? I've tried deleting and recreating the user, as well as just creating a new one from scratch--same result, locally fine, remotely an error. EDIT: Partially Resolved. I'm now passed the base issue--the clients were trying to connect via the default instance. I don't know why. So, once proper ports were opened in the firewall, and a static port assigned to the named instance, I can now connect--BUT ONLY if I specify the connection as Server,Port. SQLBrowser is apparently not helping/working in this case. I've verified it IS running, and done a stop/restart after my config changes, but no difference yet.

  Read the article

• Monit - script not being executed as expected

  - by Thaís

  I'm working on a Windows 7 machine, having a VM for Ubuntu (image disk: 12.04-desktop-i386.iso). On the VM I installed Monit 5.3.2, and configured some processes and applications. So I created a script to run my application. This application should display some content on the screen (Im basically displaying two images, using Feh). The thing is: if I call my script through the command line, it runs ok, and display the images. But if I run through monit, it seems to be running ok, but it doesn't display the images.In the case I try to debug it (remote debug), then I can see the images. So I was supposing this could be some kind of configuration, but didn't find out what (even using the option -I wou'ldn't work). I"m showing below more details: -Piece of script on Monit---- check program runMediaHandler with path "/usr/bin/runMediaHandler.sh" if status == 1 then alert -runMediaHandler.sh ---- #!/bin/bash java -jar /home/thais/Desktop/MediaHandler_RC2.jar Summarizing: 1.What works: if I run java directly: java -jar /home/thais/Desktop/MediaHandler_RC2.jar if I run the script directly: runMediaHandler.sh if I remote debug putting a breakpoint where the image should be displayed 2.What does not work: putting that piece of information on Monit to "check program", writen above (even if calling monit -I start runMediaHandler) Thank you in advance, Thaís

  Read the article

• How to disable auto insert notification in Windows 7?

  - by White Phoenix

  Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

  Read the article

• IPTables: NAT multiple IPs to one public IP

  - by Kaemmelot

  I'm looking for a way how to nat 2 or more inner IPs (in my case xen doms) to one outer IP. I tried to use iptables -t nat -A PREROUTING -d 123.123.123.123 -j DNAT --to 1.2.3.4 --to 1.2.3.7 iptables -t nat -A POSTROUTING -s 1.2.3.4 -j SNAT --to 123.123.123.123 iptables -t nat -A POSTROUTING -s 1.2.3.7 -j SNAT --to 123.123.123.123 And got an error: iptables v1.4.14: DNAT: Multiple --to-destination not supported Try `iptables -h' or 'iptables --help' for more information. I found this in the manpage: Later Kernels (= 2.6.11-rc1) don't have the ability to NAT to multiple ranges anymore. So my question is: Why is it not possible anymore and is there a workaround? Maybe I should use an other method I don't know yet? EDIT: The idea is to use the system like a router, so I have one address but multiple users behind. The problem is I don't know which connection reffers to a user (for example 1.2.3.4). But I know, they all have different ports open for incomming traffic. So my solution (for DNAT) would be to nat all incoming connections to all users and filter all unused ports, so the connection goes to one single user. For outgoing traffic I would use iptables -A FORWARD -i eth0 -d 1.2.3.4 -m state --state ESTABLISHED,RELATED -j ACCEPT

  Read the article

• EXCEL generate a character in one column of a row, only if other columns in the same row are not bl

  - by Simon

  My speadsheet keeps track of when patients leave a specific floor of the hospital. There are columns in which where each patient goes is documented (1 column for "home", another column for "rehab facility", another for "other floor", etc.). Only when the patient leaves the hospital altogether does it count as a discharge, in which case the “discharge” column needs to have something in it. What formula can I use to generate, say, an "x" in the "discharge" column if certain "where they went" columns in the same row contain something, but not if there is nothing in any of them? Currently, to accomplish this I am using =IF(OR(M30,N30,O30,P30,Q30,R30,S30),"x") in row 3 of the "discharge" column (rows 1 and 2 are headings), and I have used "fill down" in all subsequent rows. To suppress the "FALSE" this formula yields when the condition is not true, I have applied conditonal formatting to the entire column that if the value=FALSE then the font is white (same colour as background). Is there a more efficient, elegant and idiot-proof way of doing this? The conditional formatting of text colour could potentially confuse everyone but the person who built the spreadsheet (me).

  Read the article

• Spurious alleged file corruption with an SSD

  - by Johannes Rössel

  Recently my Laptop sometimes warns about corrupted files on the hard drive (Samsung SSD PB22-JS3 TM). This has only happened so far when updating (or checking out) an SVN repository with either TortoiseSVN or the command line Subversion client. The fun thing is that the corrupted file has always been a .svn directory (although the directory entry may contain files in that directory too, if they're small enough?—?which should be the case with SVN). However, when looking into the warned-about directory I notice nothing strange or unusual and don't get any more warnings about it and another try (SVN stops updating once that error occurs?—?TortoiseSVN even with an appropriate error message) of updating the working copy works (well, mostly; sometimes it does it again, albeit with a different directory). Since the laptop is only a few months old I doubt the SSD is failing already—five months of normal usage shouldn't be too surprising. Also it (so far) occurred only with SVN updates on a large repository. Maybe that's too many writes in a short time and some part between the software and the hardware doesn't quite catch up fast enough or so?—?I don't know enough about this to actually make an informed guess here. Anyone knows what's up here? ETA: Note to add: I've run chkdsk (it seems to schedule itself anyway when this happens) and it didn't find anything out of the ordinary.

  Read the article

• Having trouble setting up my router

  - by indyK1ng

  I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

  Read the article

• Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

  - by Holocryptic

  I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

  Read the article

• BGP Multipath & return routes

  - by Dennis van der Stelt

  I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about bgp multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I understand this question is a bit out of the norm for stackoverflow, but I've run out of ideas. Thank you for any help you can provide.

  Read the article

• Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

  - by NorthPole

  I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

  Read the article

• Error loading operating system: format Windows 7 to Windows XP Service Pack 3

  - by Blerta

  I saw that there are other questions like mine here. But O also saw that some problems where solved with fixmbr from a Windows 7 recovery console, but that didn't work for me. I bought my laptop with Vista installed and later reformated and used Windows 7. During formatting with Windows 7 I had some problems with my hard drive and found out it was dead so I bought a new one. I wanted to reformat with Windows XP,because Windows 7 is consuming more RAM that it is able handle and I wanted to use it for other programs. So I formatted with Windows XP Service Pack 3 but after first reboot a message appeared: "Error loading operating system" Reading here, I assumed that maybe I had installed it on the wrong partition and maybe having two OS now, so I used fixmbr but it is still not starting up. Anyway I am sure that is not the case of two operating systems. Is there any chance that when the computer designed to work with Vista you would face problems with Windows XP? Like not recognizing a hard drive?

  Read the article

• Is there a way to force spam-filter to change their policy or remove them as recognized spam service?

  - by Alvin Caseria

  As per mxtoolbox I got 1 blacklist still active for quite sometime now. UCEPROTECTL1's is running on 7 day policy since last spam mail. This is too strict compared to the 98 other spam filters out there as per mxtoolbox. (Or at least to the other 4 that detected the problem) I have no problem with our e-mail since it is hosted locally. But our domain is hosted outside the country and it run on a different IP. I contacted them but since it is the spam-filter's rule, there's nothing to be done but wait. I do believe services like spam-filters should at lease be bounded by guidelines and standards for this matter. Otherwise problem on delivering valid (after the fix) e-mails will be disastrous. Is there a way to force UCEPROTECT to change their policy or remove them as recognized spam service? Apart from contacting them in case they do not answer. Currently they are charging for fast removal if you pay by PayPal. I'm still looking for guideline/standard on how they should operate regarding this matter. Appreciate the help.

  Read the article

• Get rid of gray brackets arond editable text in restricted Word docs

  - by Brendan

  I'm trying to work out a problem in Word that I thought was simply a glitch from 2003 until we upgraded to 2010 and the problem persisted. For our corporate letterhead, we set up the template with placeholder text, highlight the text, and then make the document read-only with the exception of the selected text. The editable text turns yellow and gains these brackets around them: Once these brackets appear, they'll always show on the screen. That I can handle, though I'd like to learn how to hide them on-screen if that's possible. When the document is printed while protected, it works fine. When the document is printed while NOT protected, part of the bracket shows up on the paper! I guess the ultimate question is, how can I get rid of the brackets altogether? I can see why they exist but in my use case they create more problems than they solve. I'd like someone to be able to read the doc without seeing brackets, and I'd like other people in my department to be able to print without having to re-restrict it first. I tried to turn off bookmarks because that's what seemed to come up when I searched around, but that didn't do anything.

  Read the article

• Zero sized tar.gz file found inside a tar.gz file

  - by PavanM

  My current directory contains a single file like this- $ls -l -rw-r--r-- 1 root staff 8 May 28 09:10 pavan Now, I want to tar and gzip this file like $tar -cvf - * 2>/dev/null |gzip -vf9 > pavan.tar.gz 2>/dev/null (I am aware I am creating the zipped file in the same directory as the original file) When I run the above tar/gzip commands around 20 times, a few times I observe that the final tarred and zipped file pavan.tar.gz file has a ZERO sized pavan.tar.gz file. I am not sure from where is this zero sized file coming into the archive from. Note: I am NOT running tar/gzip commands on an already existing tar.gz file. I always make sure that the directory has only one file before running the commands On googling, as described here, I suspected that the tar.gz being created was also part of the file being archived. But in my case, gzip is the one who's creating the final file and by the time gzip runs, tar should be done tarring. This is happening on AIX but I've used Linux tag too, to draw more attention, as I guess the problem is platform independent.

  Read the article

• mpirun -np N, what if N is larger than my core number?

  - by Daniel

  Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

  Read the article

• How to stop/kill a virtual machine that hangs in "Stopping" state?

  - by SvetP

  Hi, I have a virtual machine that constantly hangs in the “Stopping” state. I’ve red several posts suggesting killing the vmwp.exe process of the machine but I’ve never been able to kill this process neither from the Windows Task Manager nor from an administrative command prompt by using prockill /PID xxxx /F where xxxx was the process ID. The only result that I have is that my machine enters in “Stopping-Critical” state. Even worse, from that point (having a virtual machine hung at stopping) I am unable to manage (stop or start) any other virtual machine on the same host. The only “solution” in that case for me is to stop the Virtual Machine Management Service (vmms.exe) and to restart the physical host. Without first stopping the vmms.exe service my physical host also hangs during the restart. Moreover, there is no any error logged in the Event Viewer. I’ve found some other posts complaining about them problem. On all of them the only suggestion was to kill the vmwp.exe process, which obviously doesn’t work for them too. Can somebody help us with this, pls? Thanks

  Read the article

• Blender refuses to start

  - by Sekhemty

  I'm trying to run Blender under Linux, but I'm unable to do that, whenever I try I get some errors. I'm using Kubuntu 12.04 with KDE 4.11.1. This is my video card: ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610/M74 [Mobility Radeon HD 2400 XT] I used to have installed the fglrx proprietary Catalyst drivers, but lately they gave me some system-wide problems and I had to revert to the open source Mesa drivers (I don't think that these details are important, but just in case, the whole story is here). Whit the fglrx drivers Blender was running fine, but now, whenever I try to start it, I get this error message (some parts are in italian, but I think that they are easily understandable): ~$ blender connect failed: No such file or directory Writing: /tmp/blender.crash.txt Errore di segmentazione (core dump creato) The content of /tmp/blender.crash.txt is as follows: # Blender 2.68 (sub 5), Revision: 60150 # backtrace /usr/lib/blender/blender() [0x877a41f] [0xb7756400] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(_ZN4llvm3ARM8SPRClassC1Ev+0x15) [0xa8f4a9d5] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(+0x25ca48) [0xa8eefa48] /lib/ld-linux.so.2(+0xeeab) [0xb7765eab] /lib/ld-linux.so.2(+0xef94) [0xb7765f94] /lib/ld-linux.so.2(+0x12fa6) [0xb7769fa6] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/ld-linux.so.2(+0x127f4) [0xb77697f4] /lib/i386-linux-gnu/libdl.so.2(+0xbe9) [0xb4ff9be9] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/i386-linux-gnu/libdl.so.2(+0x133a) [0xb4ffa33a] /lib/i386-linux-gnu/libdl.so.2(dlopen+0x47) [0xb4ff9c97] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x3cbf0) [0xb7717bf0] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x4079d) [0xb771b79d] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x1a3aa) [0xb76f53aa] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(glXQueryVersion+0x2e) [0xb76f0cee] /usr/lib/blender/blender(_ZN15GHOST_WindowX11C1EP15GHOST_SystemX11P9_XDisplayRK10STR_Stringiijj18GHOST_TWindowStatei25GHOST_TDrawingContextTypebbt+0x11c) [0x8f54aec] /usr/lib/blender/blender(_ZN15GHOST_SystemX1112createWindowERK10STR_Stringiijj18GHOST_TWindowState25GHOST_TDrawingContextTypebbti+0xd7) [0x8f4f4a7] /usr/lib/blender/blender(GHOST_CreateWindow+0xb6) [0x8f4cf86] /usr/lib/blender/blender(wm_window_add_ghostwindows+0x205) [0x8799be5] /usr/lib/blender/blender(WM_check+0x50) [0x877b670] /usr/lib/blender/blender(wm_homefile_read+0x111) [0x87859f1] /usr/lib/blender/blender(WM_init+0xd2) [0x8787872] /usr/lib/blender/blender(main+0xe6e) [0x873848e] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb4e694d3] /usr/lib/blender/blender() [0x8778a99] The only thing that I can guess from this report is that the mesa drivers are somewhat involved, as I already suspected, but I don't have a clue on what I need to do to try to solve the issue.

  Read the article

• POST Fail via AJAX Request?

  - by Jascha

  I can't for the life of me figure out why this is happening. This is kind of a repost (submitted to stackoverflow, but maybe a server issue?). I am running a javascript log out function called logOut() that has make a jQuery ajax call to a php script... function logOut(){ var data = new Object; data.log_out = true; $.ajax({ type: 'POST', url: 'http://www.mydomain.com/functions.php', data: data, success: function() { alert('done'); } }); } the php function it calls is here: if(isset($_POST['log_out'])){ $query = "INSERT INTO `token_manager` (`ip_address`) VALUES('logOutSuccess')"; $connection->runQuery($query); // <-- my own database class... // omitted code that clears session etc... die(); } Now, 18 hours out of the day this works, but for some reason, every once in a while, the POST data will not trigger my query. (this will last about an hour or so). I figured out the post data is not being set by adding this at the end of my script... $query = "INSERT INTO `token_manager` (`ip_address`) VALUES('POST FAIL')"; $connection->runQuery($query); So, now I know for certain my log out function is being skipped because in my database is the following data: if it were NOT being skipped, my data would show up like this: I know it is being skipped for two reasons, one the die() at the end of my first function, and two, if it were a success a "logOutSuccess" would be registered in the table. Any thoughts? One friend says it's a janky hosting company (hostgator.com). I personally like them because they are cheap and I'm a fan of cpanel. But, if that's the case??? Thanks in advance. -J

  Read the article

• nginx rewrite regex for API versioning

  - by MSpreij

  What I want is for the first to be turned into the second.. /widget => /widget/index.php /widget/ => /widget/index.php /widget?act=list => /widget/index.php?act=list /widget/?act=list => /widget/index.php?act=list /widget/list => /widget/index.php?act=list /widget/v2?act=list => /widget/v2.php?act=list /widget/v2/?act=list => /widget/v2.php?act=list /widget/v2/list => /widget/v2.php?act=list v2 could also be v45, basically "v\d+" act, "list" in this case, can have many values and more will be added. Any additional query parameters would just be passed on with $args, I guess. Basically URLs not specifying the version will go to index.php, which can then decide what specific version file to include. What I am afraid of happening is loops - this should sit in location /widget { right?. (As for putting the version of the API in the URL, I'm not trying to be RESTful, and target audience is small) Resources on how to do this entirely in index.php using "routers" also welcome :-/

  Read the article

• Using AddEncoding x-gzip .gz without actual files

  - by STATUS_ACCESS_DENIED

  With Apache (2.2 and later) how can I achieve the following. I want to transparently compress using GZip encoding (not plain Deflate) the output when a certain file is queried with its name plus the extension .gz, where the .gz version doesn't physically exist on disk. So let's say I have a file named /path/foo.bar and no file foo.bar.gz in the folder to which the URI /path maps, how can I get Apache to serve the contents of /path/foo.bar but with AddEncoding x-gzip ... applied to the (non-existing) file? The rewrite part appears to be easy, but the problem is how to apply the encoding to a non-existent item. The other way around also seems to be simple as long as the client supports the encoding. Is the only solution really a script that does this on the fly? I'm aware of mod_deflate and mod_gzip and it is not what I'm looking for - at least not alone. In particular I need an actual GZIP file and not just a deflated stream. Now I was thinking of using mod_ext_filter, but couldn't bridge the gap between rewriting the name of the (non-existent) file.gz to file on one side and the LocationMatch on the other. Here's what I have. RewriteRule ^(.*?\.ext)\.gz$ $1 [L] ExtFilterDefine gzip mode=output cmd="/bin/gzip" <LocationMatch "/my-files/special-path/.*?\.ext\.gz"> AddType application/octet-stream .ext.gz SetOutputFilter gzip Header set Content-Encoding gzip </LocationMatch> Note that the header for Content-Encoding isn't really needed by the clients in this case. They expect to see actual GZIP files, but I want to do this on-the-fly without caching (this is a test scenario).

  Read the article

• USB mouse disconnecting and reconnecting in windows and linux

  - by Kalak

  I have a problem similar to what is described at "Why is my USB mouse disconnecting and reconnecting randomly and often?" except is is happening in both Windows 7 and Linux (Ubuntu 12/04TLS, fully patched), multiple mice, multiple OSs. It stops responding to input for about 3-5 seconds, then starts responding again. It's more frequent and lasts longer when running games (TF2, L4D, Dishonored, Borderlands 2, and more), but happens when just running the OS as well. I was hoping it was the motherboard so I bought a USB 2.0 PCI card to try that, but it's still happening. I've stripped it down to just the keyboard and mouse (different keyboard too just in case the keyboard was the problem), but it's still happening. All the hardware (mice and keyboards) work fine on other computers. I have literally pulled the mouse and keyboard out and plugged them into another computer (laptop) and re-joined the online game and had no problem with the keyboard and mouse combo that just failed on my gaming rig. Please no driver / Windows or Linux only suggestions, as that wouldn't effect both OSs. edit: known good mice I've brought home are now going bad. I suspect the hardware is messed up (voltage?) and has been frying the mice.

  Read the article

< Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >